opnsense-src/sys/dev/mii
Poul-Henning Kamp 135bd3f8a1 Make sure set the media type in the phy, we cannot trust it to have chosen
the type we happen to want.

Bug triggered by net-booting soekris hardware which comes up in 10/hdx mode
by default.
2004-01-17 10:44:39 +00:00
..
acphy.c Use __FBSDID(). 2003-08-24 17:55:58 +00:00
acphyreg.h Add QS6612, AC101 and LXT970 personal drivers and register definitions. 2001-02-07 19:57:40 +00:00
amphy.c Use __FBSDID(). 2003-08-24 17:55:58 +00:00
amphyreg.h Add a driver for the AMD AM79c873 10/100 PHY. By some strange coincidence, 1999-09-06 05:27:55 +00:00
bmtphy.c Add a device driver for the Broadcom BCM4401 ethernet controller, 2003-09-09 18:17:23 +00:00
bmtphyreg.h Add a driver for the Broadcom BCM52xx "mini-theta" PHY. This includes the 2002-07-05 11:07:24 +00:00
brgphy.c Replace the if_name and if_unit members of struct ifnet with new members 2003-10-31 18:32:15 +00:00
brgphyreg.h Fix bge at 10Mbit. The defines for 10-Half and 10-Full were swapped. 2003-06-17 15:02:28 +00:00
dcphy.c Use __FBSDID(). 2003-08-24 17:55:58 +00:00
e1000phy.c Add support for SK-9521 V2.0 and 3COM 3C940. 2003-09-20 10:53:08 +00:00
e1000phyreg.h Add support for SK-9521 V2.0 and 3COM 3C940. 2003-09-20 10:53:08 +00:00
exphy.c Use __FBSDID(). 2003-08-24 17:55:58 +00:00
inphy.c Use __FBSDID(). 2003-08-24 17:55:58 +00:00
inphyreg.h Add drivers for Intel 82553 and 82555 PHYs. 2001-03-12 02:41:57 +00:00
lxtphy.c Use __FBSDID(). 2003-08-24 17:55:58 +00:00
lxtphyreg.h Add QS6612, AC101 and LXT970 personal drivers and register definitions. 2001-02-07 19:57:40 +00:00
mii.c Use __FBSDID(). 2003-08-24 17:55:58 +00:00
mii.h Move a lot closer to NetBSDs MII support for GigE. 2002-04-29 11:57:30 +00:00
mii_physubr.c Use __FBSDID(). 2003-08-24 17:55:58 +00:00
miibus_if.m Add new device method miibus_linkchg, along with a service routine. 2001-09-29 18:40:06 +00:00
miidevs Add support for SK-9521 V2.0 and 3COM 3C940. 2003-09-20 10:53:08 +00:00
miivar.h Clean up mii/phy drivers: Remove the MIIF_DOINGAUTO which doesn't really 2002-05-04 11:00:30 +00:00
mlphy.c Use __FBSDID(). 2003-08-24 17:55:58 +00:00
nsgphy.c Use __FBSDID(). 2003-08-24 17:55:58 +00:00
nsgphyreg.h Move a lot closer to NetBSDs MII support for GigE. 2002-04-29 11:57:30 +00:00
nsphy.c Use __FBSDID(). 2003-08-24 17:55:58 +00:00
nsphyreg.h $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
pnaphy.c Use __FBSDID(). 2003-08-24 17:55:58 +00:00
pnphy.c Use __FBSDID(). 2003-08-24 17:55:58 +00:00
qsphy.c Use __FBSDID(). 2003-08-24 17:55:58 +00:00
qsphyreg.h Add QS6612, AC101 and LXT970 personal drivers and register definitions. 2001-02-07 19:57:40 +00:00
rgephy.c Clean up dead code. 2003-09-11 08:28:38 +00:00
rgephyreg.h Add a PHY driver to support the built-in gigE PHY in the 8169S/8110S 2003-09-11 03:53:46 +00:00
rlphy.c Take the support for the 8139C+/8169/8169S/8110S chips out of the 2003-09-08 02:11:25 +00:00
ruephy.c Use __FBSDID(). 2003-08-24 17:55:58 +00:00
ruephyreg.h Add RealTek RTL8150 USB to fast Ethernet controller driver. 2003-05-03 10:16:56 +00:00
tdkphy.c Use __FBSDID(). 2003-08-24 17:55:58 +00:00
tdkphyreg.h NEWCARD/Cardbus - 2000-10-19 08:34:32 +00:00
tlphy.c Use __FBSDID(). 2003-08-24 17:55:58 +00:00
tlphyreg.h $Id$ -> $FreeBSD$ 1999-08-28 02:16:32 +00:00
ukphy.c Make sure set the media type in the phy, we cannot trust it to have chosen 2004-01-17 10:44:39 +00:00
ukphy_subr.c Use __FBSDID(). 2003-08-24 17:55:58 +00:00
xmphy.c Use __FBSDID(). 2003-08-24 17:55:58 +00:00
xmphyreg.h Fix reversed definitions for the bits that select half vs. full duplex. 2002-01-10 18:06:41 +00:00