Adrian Chadd 036e1c7646 Commit 802.1q configuration support for the AR8327. ... This is slightly different to the other switches - the VLAN table (VTU) programs in the vlan port mapping /and/ the port config (tagged, untagged, passthrough, any.) So: * Add VTU operations to program the VTU (vlan table) * abstract out the mirror-disable function so it's .. well, a function. * setup the port to have a dot1q configuration for dot1q - the port security is VLAN (not per-port VLAN) and requires an entry in the VLAN table; * add set_dot1q / get_dot1q to program the VLAN table; * since the tagged/untagged ports are now programmed into the VTU, rather than global - plumb the ports /and/ untagged ports bitmaps through the arswitch API. Tested: * AP135 - QCA9558 SoC + AR8327N switch		2015-03-13 02:16:39 +00:00
..
arswitch	Commit 802.1q configuration support for the AR8327.	2015-03-13 02:16:39 +00:00
ip17x	Fix the build with debug enabled and remove a variable used only at switch	2014-05-09 13:21:34 +00:00
rtl8366	Revert r268543.	2014-07-12 06:23:42 +00:00
ukswitch	- Provide necessary includes.	2013-10-29 11:17:49 +00:00
etherswitch.c	Add the ability to change the vlan operation mode.	2013-05-08 20:46:54 +00:00
etherswitch.h	Add a new flag (ETHERSWITCH_VID_VALID) to say what vlangroups are in use.	2013-07-23 13:56:38 +00:00
etherswitch_if.m	Add the ability to change the vlan operation mode.	2013-05-08 20:46:54 +00:00
mdio.c
mdio.h
mdio_if.m
miiproxy.c	- Provide necessary includes, that before came via if.h pollution.	2013-10-28 22:26:03 +00:00
miiproxy.h