..
twsi
Always ignore the START and STOP bits whenever the control register is
2017-06-20 18:38:51 +00:00
ad7417.c
Do the ADC init only at startup and not during every sensor read call.
2012-08-19 19:31:36 +00:00
ad7418.c
Fix drivers that assume ticks starts at zero. These drivers all have logic
2017-07-06 17:03:22 +00:00
adm1030.c
Move the adm1030 driver to the proper location, and rename it.
2014-10-16 01:32:22 +00:00
adt746x.c
Use OF_prop_free instead of direct call to free(9)
2016-05-14 20:06:38 +00:00
ds13rtc.c
Change "chiptype" to "compatible". Making the hint name the same as the FDT
2017-08-13 21:45:46 +00:00
ds1307.c
No need to call getnanotime() now that the waiting is done by the central
2017-07-31 21:53:00 +00:00
ds1307reg.h
Bugfixes and enhancements...
2017-07-30 18:46:38 +00:00
ds1631.c
Make more unsigned ints signed.
2013-12-07 22:25:07 +00:00
ds1672.c
Use DEVMETHOD_END macro defined in sys/bus.h instead of {0, 0} sentinel on device_method_t arrays
2013-01-30 18:01:20 +00:00
ds1775.c
Make more unsigned ints signed.
2013-12-07 22:25:07 +00:00
ds3231.c
Bugfixes and enhancements...
2017-07-31 22:00:00 +00:00
ds3231reg.h
Bugfixes and enhancements...
2017-07-31 22:00:00 +00:00
icee.c
Add FDT compatibility to the icee driver.
2015-10-22 01:04:31 +00:00
if_ic.c
sys/dev: Replace zero with NULL for pointers.
2017-02-20 03:43:12 +00:00
iic.c
iic_rdwr_data->nmsgs is uint32_t, so limit the allowable number of messages to prevent memory exhaustion and short allocations on 32-bit systems. Since iicrdwr is intended to be a workalike of a Linux i2c-dev call, use the same limit of 42 that Linux uses.
2016-05-20 03:03:04 +00:00
iic.h
iic_rdwr_data->nmsgs is uint32_t, so limit the allowable number of messages to prevent memory exhaustion and short allocations on 32-bit systems. Since iicrdwr is intended to be a workalike of a Linux i2c-dev call, use the same limit of 42 that Linux uses.
2016-05-20 03:03:04 +00:00
iic_recover_bus.c
Add iic_recover_bus(), a helper function that can be used by any i2c driver
2017-06-29 01:50:58 +00:00
iic_recover_bus.h
Add iic_recover_bus(), a helper function that can be used by any i2c driver
2017-06-29 01:50:58 +00:00
iicbb.c
iicbus: Use device_delete_children() instead of explicit child removal
2015-10-20 19:52:59 +00:00
iicbb_if.m
Remove a couple of extra blank lines.
2016-05-22 04:09:05 +00:00
iicbus.c
add iic interface to ig4 driver, move isl and cyapa to iicbus
2016-10-30 12:15:33 +00:00
iicbus.h
Add support for tracking nested calls to iicbus_request/release_bus().
2017-07-26 21:06:26 +00:00
iicbus_if.m
Fix numerous issues in iic(4) and iicbus(4):
2015-04-21 11:50:31 +00:00
iicoc.c
Migrate many bus_alloc_resource() calls to bus_alloc_resource_anywhere().
2016-02-27 03:38:01 +00:00
iicoc.h
Driver for OpenCores I2C controller.
2012-03-27 10:44:32 +00:00
iiconf.c
Add support for tracking nested calls to iicbus_request/release_bus().
2017-07-26 21:06:26 +00:00
iiconf.h
Add a pair of convenience routines for doing simple "register" read/writes
2017-07-26 20:40:24 +00:00
iicsmb.c
iicsmb: SMB_MAXBLOCKSIZE can be used again
2016-11-11 15:11:54 +00:00
isl12xx.c
Add a driver for the Intersil ISL12xx family of i2c RTC chips.
2017-08-01 04:16:52 +00:00
lm75.c
Fix the deciKelvin to Celsius conversion in kernel.
2016-05-22 13:58:32 +00:00
max6690.c
Check error return from reading integer part of temperature.
2014-10-12 23:48:55 +00:00
nxprtc.c
Add hinted attachment for non-FDT systems. Also, print a message if
2017-08-14 02:23:10 +00:00
ofw_iicbus.c
Make ofw_iicbus attach to twsi I2C controllers.
2017-06-20 18:25:27 +00:00
s35390a.c
Minor fixes and enhancements for the s35390a i2c RTC driver...
2017-08-14 00:00:24 +00:00
sy8106a.c
Add driver for Silergy Corp. SY8106A buck regulator.
2016-09-05 13:39:54 +00:00
a6e709f29c