mirror of
https://github.com/opnsense/src.git
synced 2026-04-22 23:02:02 -04:00
Within the code path of autonegotiation for gigabit SFP modules was a bug, causing a report of LINK_ERR for cases where an external SFP PHY was present. Fixing this issue did not resolve to a link however, as it turned out that while autonegotiation interrupts were happening, it's resulting status cannot be correctly determined in all cases. In these specific cases we have no other option than to assume a module has negotiated to 1Gbit/s. PHY-specific configuration has been delegated to the miibus driver, if an external PHY is present. It's possible that the i2c bus does not recognize a PHY on the first pass, so in all cases we retry up to a maximum of 5 times during each link poll pass to ensure we didn't miss the presence of an external PHY. This commit also addresses link issues on both 100 mbit and 1Gb fiber modules. Not all of these modules have the correct data set according to SFF-8472, as such we first check for gigabit compliance and the associated baudrate, otherwise we resort back to determining what type of fiber module is plugged in by checking the baudrate, cable length and wavelength and setting the MAC speed accordingly. |
||
|---|---|---|
| .. | ||
| amd64 | ||
| arm | ||
| arm64 | ||
| bsm | ||
| cam | ||
| cddl | ||
| compat | ||
| conf | ||
| contrib | ||
| crypto | ||
| ddb | ||
| dev | ||
| dts | ||
| fs | ||
| gdb | ||
| geom | ||
| gnu | ||
| i386 | ||
| isa | ||
| kern | ||
| kgssapi | ||
| libkern | ||
| modules | ||
| net | ||
| net80211 | ||
| netgraph | ||
| netinet | ||
| netinet6 | ||
| netipsec | ||
| netlink | ||
| netpfil | ||
| netsmb | ||
| nfs | ||
| nfsclient | ||
| nfsserver | ||
| nlm | ||
| ofed | ||
| opencrypto | ||
| powerpc | ||
| riscv | ||
| rpc | ||
| security | ||
| sys | ||
| teken | ||
| tests | ||
| tools | ||
| ufs | ||
| vm | ||
| x86 | ||
| xdr | ||
| xen | ||
| Makefile | ||
| README.md | ||
FreeBSD Kernel Source:
This directory contains the source files and build glue that make up the FreeBSD kernel and its modules, including both original and contributed software.
Kernel configuration files are located in the conf/ subdirectory of each
architecture. GENERIC is the configuration used in release builds. NOTES
contains documentation of all possible entries. LINT is a compile-only
configuration used to maximize build coverage and detect regressions.
Documentation:
Source code documentation is maintained in a set of man pages, under section 9.
These pages are located in share/man/man9, from the
top-level of the src tree. Consult intro(9)
for an overview of existing pages.
Some additional high-level documentation of the kernel is maintained in the Architecture Handbook.
Source Roadmap:
| Directory | Description |
|---|---|
| amd64 | AMD64 (64-bit x86) architecture support |
| arm | 32-bit ARM architecture support |
| arm64 | 64-bit ARM (AArch64) architecture support |
| cam | Common Access Method storage subsystem - cam(4) and ctl(4) |
| cddl | CDDL-licensed optional sources such as DTrace |
| conf | kernel build glue |
| compat | Linux compatibility layer, FreeBSD 32-bit compatibility |
| contrib | 3rd-party imported software such as OpenZFS |
| crypto | crypto drivers |
| ddb | interactive kernel debugger - ddb(4) |
| fs | most filesystems, excluding UFS, NFS, and ZFS |
| dev | device drivers and other arch independent code |
| gdb | kernel remote GDB stub - gdb(4) |
| geom | GEOM framework - geom(4) |
| i386 | i386 (32-bit x86) architecture support |
| kern | main part of the kernel |
| libkern | libc-like and other support functions for kernel use |
| modules | kernel module infrastructure |
| net | core networking code |
| net80211 | wireless networking (IEEE 802.11) - net80211(4) |
| netgraph | graph-based networking subsystem - netgraph(4) |
| netinet | IPv4 protocol implementation - inet(4) |
| netinet6 | IPv6 protocol implementation - inet6(4) |
| netipsec | IPsec protocol implementation - ipsec(4) |
| netpfil | packet filters - ipfw(4), pf(4), and ipfilter(4) |
| opencrypto | OpenCrypto framework - crypto(7) |
| powerpc | PowerPC/POWER (32 and 64-bit) architecture support |
| riscv | 64-bit RISC-V architecture support |
| security | security facilities - audit(4) and mac(4) |
| sys | kernel headers |
| tests | kernel unit tests |
| ufs | Unix File System - ffs(7) |
| vm | virtual memory system |
| x86 | code shared by AMD64 and i386 architectures |