Pyun YongHyeon 7aa69e3107 Disable EEE(Energy Efficient Ethernet) for RTL8211F PHY. ... It seems the EEE made RX MAC enter LPI(Low Power Idle) mode such that dwc(4) was not able to receive packets. Ideally dwc(4) should be able to use EEE to save power during periods of low link utilization(i.e. gating off clock). Due to lack of dwc(4) datasheet it's not easy to take required steps for EEE on LPI enter/exit events. Disabling EEE in PHY seems to be easy workaround until dwc(4) supports EEE. Updating EEE advertisement register on RTL8211F seems to have no effect until reprogramming MII_ANAR, MII_100T2CR and MII_BMCR with auto-negotiation. It's not clear whether it's related with mii_phy_reset()'s BMCR_ISO handling for RTL8211F though. It seems rgephy_reset() needs careful investigation for newer RealTek PHYs. Ganbold submitted working version based on NetBSD change and tested lots of changes I made. Thanks a lot! Submitted by: ganbold (initial version) In collaboration with: ganbold		2015-12-03 05:27:39 +00:00
..
acphy.c	Instead of storing mii_media_table array index in ifm_data, determine	2015-04-21 09:39:48 +00:00
acphyreg.h
amphy.c	The MII layer shouldn't care about administrative status of an	2013-10-26 18:40:17 +00:00
amphyreg.h
atphy.c	Add definition for the Atheros 8021 gigabit PHY.	2013-11-06 16:28:26 +00:00
atphyreg.h
axphy.c	The MII layer shouldn't care about administrative status of an	2013-10-26 18:40:17 +00:00
bmtphy.c	The MII layer shouldn't care about administrative status of an	2013-10-26 18:40:17 +00:00
bmtphyreg.h
brgphy.c	Add more BCM gigabit PHYs	2015-09-04 17:48:19 +00:00
brgphyreg.h
ciphy.c	In miibus(4) drivers provide functions that allow to get NIC	2015-01-12 22:27:38 +00:00
ciphyreg.h
e1000phy.c	- Remove unused variable.	2015-01-13 06:22:55 +00:00
e1000phyreg.h
gentbi.c	The MII layer shouldn't care about administrative status of an	2013-10-26 18:40:17 +00:00
icsphy.c	The MII layer shouldn't care about administrative status of an	2013-10-26 18:40:17 +00:00
icsphyreg.h
ip1000phy.c	In miibus(4) drivers provide functions that allow to get NIC	2015-01-12 22:27:38 +00:00
ip1000phyreg.h
jmphy.c	Remove unused variables.	2015-01-13 06:56:04 +00:00
jmphyreg.h
lxtphy.c	Instead of storing mii_media_table array index in ifm_data, determine	2015-04-21 09:39:48 +00:00
lxtphyreg.h
micphy.c	o Put () for p to avoid unexpected macro expansion	2014-12-10 11:35:10 +00:00
mii.c	Typo: ivalid -> invalid.	2015-01-21 09:01:48 +00:00
mii.h	Fix yet another comment typo in NetBSD rev. 1.16, missed when merging	2015-06-18 14:13:16 +00:00
mii_bitbang.c
mii_bitbang.h
mii_physubr.c	Instead of storing mii_media_table array index in ifm_data, determine	2015-04-21 09:39:48 +00:00
miibus_if.m
miidevs	Add more BCM gigabit PHYs	2015-09-04 17:48:19 +00:00
miivar.h	Instead of storing mii_media_table array index in ifm_data, determine	2015-04-21 09:39:48 +00:00
mlphy.c	The comment on BMCR data in if_media entry is wrong. The ifm_data stores	2015-04-21 08:54:14 +00:00
nsgphy.c	The MII layer shouldn't care about administrative status of an	2013-10-26 18:40:17 +00:00
nsgphyreg.h
nsphy.c	In miibus(4) drivers provide functions that allow to get NIC	2015-01-12 22:27:38 +00:00
nsphyreg.h
nsphyter.c	The MII layer shouldn't care about administrative status of an	2013-10-26 18:40:17 +00:00
nsphyterreg.h
pnaphy.c	The MII layer shouldn't care about administrative status of an	2013-10-26 18:40:17 +00:00
qsphy.c	The MII layer shouldn't care about administrative status of an	2013-10-26 18:40:17 +00:00
qsphyreg.h
rdcphy.c	The MII layer shouldn't care about administrative status of an	2013-10-26 18:40:17 +00:00
rdcphyreg.h
rgephy.c	Disable EEE(Energy Efficient Ethernet) for RTL8211F PHY.	2015-12-03 05:27:39 +00:00
rgephyreg.h	Disable EEE(Energy Efficient Ethernet) for RTL8211F PHY.	2015-12-03 05:27:39 +00:00
rlphy.c	In miibus(4) drivers provide functions that allow to get NIC	2015-01-12 22:27:38 +00:00
rlswitch.c	Move rl(4) to dev/rl.	2014-09-19 10:32:20 +00:00
smcphy.c	The MII layer shouldn't care about administrative status of an	2013-10-26 18:40:17 +00:00
smscphy.c	The MII layer shouldn't care about administrative status of an	2013-10-26 18:40:17 +00:00
tdkphy.c	The MII layer shouldn't care about administrative status of an	2013-10-26 18:40:17 +00:00
tdkphyreg.h
tlphy.c	In miibus(4) drivers provide functions that allow to get NIC	2015-01-12 22:27:38 +00:00
tlphyreg.h
truephy.c	Use nitems().	2015-01-09 12:26:08 +00:00
truephyreg.h
ukphy.c	The MII layer shouldn't care about administrative status of an	2013-10-26 18:40:17 +00:00
ukphy_subr.c
xmphy.c	Since xmphy doesn't call mii_phy_setmedia(), there is no reason to set ifm_data.	2015-04-21 06:59:40 +00:00
xmphyreg.h