..
ath_dfs /null
Add a method to explicitly disable radar reporting if required.
2013-01-02 01:36:10 +00:00
ath_hal
Add a new TX power field - it's inteded to be used where low TX power
2013-04-05 09:06:39 +00:00
ath_rate
I give up - just throw the EWMA update into the normal update_stats()
2013-02-27 04:33:06 +00:00
ah_osdep.c
Fix the HAL debugging to only use one bit to mark a message as unmaskable.
2012-07-01 02:34:32 +00:00
ah_osdep.h
Migrate the ath_hal_filltxdesc() API to take a list of buffer/seglen values.
2012-08-05 10:12:27 +00:00
if_ath.c
Some TX dmamap cleanups.
2013-04-02 06:24:22 +00:00
if_ath_ahb.c
Create a new TX lock specifically for queuing frames.
2013-02-07 07:50:16 +00:00
if_ath_alq.c
Extend the timestamp to be a timeval, rather than ticks.
2013-02-11 02:48:49 +00:00
if_ath_alq.h
Fix an incorrect sizeof()
2013-02-18 18:39:15 +00:00
if_ath_beacon.c
Implement the replacement EDMA FIFO code.
2013-03-26 20:04:45 +00:00
if_ath_beacon.h
Overhaul the TXQ locking (again!) as part of some beacon/cabq timing
2013-03-24 00:03:12 +00:00
if_ath_debug.c
TX EDMA debugging fixes:
2012-11-05 07:08:45 +00:00
if_ath_debug.h
Add a debug method to dump the EDMA TX status descriptor contents out.
2012-11-03 04:53:44 +00:00
if_ath_keycache.c
Don't allocate or program a key for the AR5210.
2012-11-19 23:54:05 +00:00
if_ath_keycache.h
Add a 'vap' to ath_keyset().
2011-11-08 19:25:52 +00:00
if_ath_led.c
Bring over the initial 802.11n bluetooth coexistence support code.
2012-06-26 22:16:53 +00:00
if_ath_led.h
Refactor out the software LED config code into a common function, called
2011-12-26 05:46:22 +00:00
if_ath_misc.h
Ensure that we only call the busdma unmap/flush routines once, when
2013-04-01 20:57:13 +00:00
if_ath_pci.c
Create a new TX lock specifically for queuing frames.
2013-02-07 07:50:16 +00:00
if_ath_rx.c
Fix the busdma logic to work with EDMA chipsets when using bounce
2013-04-04 08:21:56 +00:00
if_ath_rx.h
Fix the busdma logic to work with EDMA chipsets when using bounce
2013-04-04 08:21:56 +00:00
if_ath_rx_edma.c
Update comments!
2013-04-04 08:57:29 +00:00
if_ath_rx_edma.h
Begin abstracting out the RX path in preparation for RX EDMA support.
2012-07-03 06:59:12 +00:00
if_ath_spectral.c
Fix format size.
2013-01-08 22:42:15 +00:00
if_ath_spectral.h
Add a new (skeleton) spectral mode manager module.
2013-01-02 03:59:02 +00:00
if_ath_sysctl.c
Overhaul the TXQ locking (again!) as part of some beacon/cabq timing
2013-03-24 00:03:12 +00:00
if_ath_sysctl.h
Break out most of the HAL related tweaks into a per-HAL instance,
2011-06-23 02:38:36 +00:00
if_ath_tdma.c
Overhaul the TXQ locking (again!) as part of some beacon/cabq timing
2013-03-24 00:03:12 +00:00
if_ath_tdma.h
Migrate the TDMA management functions out of if_ath.c into if_ath_tdma.c.
2012-05-20 02:49:42 +00:00
if_ath_tsf.h
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch].
2012-05-20 02:05:10 +00:00
if_ath_tx.c
Mark a couple of places where I think the dmamap isn't being unmapped
2013-04-02 06:25:10 +00:00
if_ath_tx.h
Add a new option to limit the maximum size of aggregates.
2013-02-21 06:18:40 +00:00
if_ath_tx_edma.c
* Stop processing after HAL_EIO; this is what the reference driver does.
2013-03-27 00:35:45 +00:00
if_ath_tx_edma.h
Begin separating out the TX DMA setup in preparation for TX EDMA support.
2012-07-23 03:52:18 +00:00
if_ath_tx_ht.c
Oops - fix an incorrect test.
2013-02-28 23:39:22 +00:00
if_ath_tx_ht.h
Introduce TX aggregation and software TX queue management
2011-11-08 22:43:13 +00:00
if_athdfs.h
Add a method to explicitly disable radar reporting if required.
2013-01-02 01:36:10 +00:00
if_athioctl.h
Add a few new fields to the RX vendor radiotap header:
2013-03-11 06:54:58 +00:00
if_athrate.h
Add missing flags.
2013-02-28 23:39:38 +00:00
if_athvar.h
Add per-TXQ EDMA FIFO staging queue support.
2013-03-26 19:46:51 +00:00
7598a108ff