Marius Strobl cabe79d9d8 Avoid the USB device disconnected and controller shutdown clutter on system ... shutdown by putting the former under !rebooting and turning the latter into debug messages. Reviewed by: hps MFC after: 1 week Sponsored by: Bally Wulff Games & Entertainment GmbH		2014-06-10 08:20:00 +00:00
..
at91dci.c	- Isochronous transfers should use the alternate next transfer	2014-05-13 13:46:38 +00:00
at91dci.h
at91dci_atmelarm.c	Remove FreeBSD 6 support	2014-02-08 04:29:36 +00:00
at91dci_fdt.c	Add device and gadget bindings for fdt. These are preliminary and will	2014-02-28 03:00:31 +00:00
atmegadci.c	- Isochronous transfers should use the alternate next transfer	2014-05-13 13:46:38 +00:00
atmegadci.h
atmegadci_atmelarm.c
avr32dci.c	- Isochronous transfers should use the alternate next transfer	2014-05-13 13:46:38 +00:00
avr32dci.h
dwc_otg.c	Fix for USB specification compliance. We need to accept both DATA0 and	2014-06-07 10:13:45 +00:00
dwc_otg.h	Some further DWC OTG improvements for full speed and low speed devices:	2014-06-07 07:23:17 +00:00
dwc_otg_fdt.c	- Add softc pointer argument to FIFO functions as an optimisation.	2014-05-18 09:13:29 +00:00
dwc_otgreg.h	Multiple DWC OTG host mode related fixes and improvements:	2014-05-09 14:23:06 +00:00
ehci.c	Issue doorbell twice before finally freeing the DMA descriptors. This	2014-02-12 08:04:38 +00:00
ehci.h	Fix undefined behavior: (1 << 31) is not defined as 1 is an int and this	2013-11-30 22:17:27 +00:00
ehci_fsl.c	Follow r261352 by updating all drivers which are children of simplebus	2014-02-02 19:17:28 +00:00
ehci_imx.c	Stop calling imx51_ccm_foo() clock functions from imx6 code. Instead	2014-04-26 16:48:09 +00:00
ehci_ixp4xx.c
ehci_mv.c	Follow r261352 by updating all drivers which are children of simplebus	2014-02-02 19:17:28 +00:00
ehci_pci.c	Add some more IDs for Intel ATA, AHCI and USB controllers.	2013-11-15 10:28:59 +00:00
ehcireg.h
musb_otg.c	- Verify that we don't load more data into a FIFO than it is	2014-06-05 18:23:51 +00:00
musb_otg.h	- Verify that we don't load more data into a FIFO than it is	2014-06-05 18:23:51 +00:00
musb_otg_atmelarm.c	- Add initial host mode support for Mentor Graphics USB OTG controller	2013-07-07 04:18:35 +00:00
ohci.c	USB method structures for USB controllers and USB pipes should be	2013-12-11 13:20:32 +00:00
ohci.h
ohci_atmelarm.c	Remove FreeBSD 6 support	2014-02-08 04:29:36 +00:00
ohci_fdt.c	Add device and gadget bindings for fdt. These are preliminary and will	2014-02-28 03:00:31 +00:00
ohci_pci.c	Fix some USB controller names according to pciconf output.	2013-08-17 06:29:45 +00:00
ohci_s3c24x0.c
ohcireg.h
saf1761_otg.c	Need to check the transfer cache field in the device done function	2014-06-05 18:19:48 +00:00
saf1761_otg.h	Optimise the ISP/SAF1761 driver:	2014-05-29 10:06:18 +00:00
saf1761_otg_boot.c	Add ISP/SAF1761 bootloader bus interface file.	2014-05-30 13:42:11 +00:00
saf1761_otg_fdt.c	Hook the ISP/SAF1761 driver into MIPS kernel builds.	2014-05-29 10:46:09 +00:00
saf1761_otg_reg.h	Add basic support for isochronous transfers in host mode to the	2014-06-01 10:22:18 +00:00
uhci.c	Separate I/O errors from reception of STALL PID.	2014-01-13 15:06:03 +00:00
uhci.h
uhci_pci.c
uhcireg.h
usb_controller.c	Avoid the USB device disconnected and controller shutdown clutter on system	2014-06-10 08:20:00 +00:00
uss820dci.c	- Isochronous transfers should use the alternate next transfer	2014-05-13 13:46:38 +00:00
uss820dci.h
uss820dci_atmelarm.c
xhci.c	- Fix a bug where the TLBPC value was forced to being odd for IN	2014-05-22 11:58:15 +00:00
xhci.h	Setting the IMOD value below 0x3F8 can cause IRQ lockups in the Intel	2014-04-27 15:41:44 +00:00
xhci_pci.c	Setting the IMOD value below 0x3F8 can cause IRQ lockups in the Intel	2014-04-27 15:41:44 +00:00
xhcireg.h	Setting the IMOD value below 0x3F8 can cause IRQ lockups in the Intel	2014-04-27 15:41:44 +00:00