Ian Lepore 8926f21ce1 Enable at91 systems to boot from high capacity SD cards. ... This also fixes a few minor violations of the SD protocol, such as running the bus at high speed during the card identification sequence. The sdcard_init() routine now probes for SDHC cards so that later read requests can make needed adjustments between block and byte offsets based on card type. There is a new MCI_readblocks() function that takes block number and block count parameters instead of byte-offset values. Using this routine, boot loader code can load a kernel from any location on an SDHC or standard SD. The old MCI_read() interface remains unchanged so that existing customized boot loader code will still keep working without changes. Using this routine, boot loaders can load a kernel from anywhere in the first 4GB of an SDHC card (or of course any location on a standard SD card). A new sdcard_use4wire() routine allows boot loaders to request 4-bit transfers; it should be called after sdcard_init(). The sdcard_init() routine no longer assumes the hardware is 4-wire capable and by default sets things up for 1-bit transfers. (4-wire mode is unreliable on at91rm9200, works on later SoCs.) PR: 155894 Submitted by: me. years ago.		2014-07-26 04:16:04 +00:00
..
at91	Enable at91 systems to boot from high capacity SD cards.	2014-07-26 04:16:04 +00:00
ixp425	Use src.opts.mk in preference to bsd.own.mk except where we need stuff	2014-05-06 04:22:01 +00:00
uboot	Use src.opts.mk in preference to bsd.own.mk except where we need stuff	2014-05-06 04:22:01 +00:00
Makefile	Initial support of loader(8) for ARM machines running U-Boot.	2008-10-14 10:11:14 +00:00
Makefile.inc	Enable GCC stack protection (aka Propolice) for userland:	2008-06-25 21:33:28 +00:00