..
ar9002phy.h
Port over a TX gain fix from ath9k specific to the AR9285 (Kite) and AR9271.
2011-04-13 04:40:59 +00:00
ar9280.c
Implement the quarter rate fractional channel programming for the
2012-10-04 15:42:45 +00:00
ar9280.h
Break out the PLL setup into (mostly) per-chip methods, rather than
2011-07-21 08:35:10 +00:00
ar9280_attach.c
Bring over the basic spectral scan framework code from Qualcomm Atheros.
2013-01-02 00:38:01 +00:00
ar9280_olc.c
Only do open loop power control and temperature compensation
2011-05-13 14:33:45 +00:00
ar9280_olc.h
Implement open-loop TX power control (OLC) for Merlin (AR9280) and
2011-03-08 06:59:59 +00:00
ar9280v1.ini
ar9280v2.ini
Update the AR9280v2 inivals to match what is in Linux ath9k.
2011-01-23 14:30:35 +00:00
ar9285.c
Add the 11n chipset RF frontends to the linker set, even though they're not
2011-12-15 00:59:11 +00:00
ar9285.h
Migrate the LNA mixing diversity machinery from the AR9285 HAL to the driver.
2013-06-12 14:52:57 +00:00
ar9285.ini
ar9285_attach.c
Migrate the LNA mixing diversity machinery from the AR9285 HAL to the driver.
2013-06-12 14:52:57 +00:00
ar9285_btcoex.c
Add bluetooth fixes to the AR5416/AR92xx HAL:
2013-06-07 05:17:58 +00:00
ar9285_cal.c
Break out the AR9285 analog registers from ar5416/ar5416phy.h and put
2011-05-12 10:11:24 +00:00
ar9285_cal.h
Port over the AR9285 PA calibration and initial calibration code from
2011-03-11 11:58:54 +00:00
ar9285_diversity.c
Migrate the LNA mixing diversity machinery from the AR9285 HAL to the driver.
2013-06-12 14:52:57 +00:00
ar9285_diversity.h
Migrate the LNA mixing diversity machinery from the AR9285 HAL to the driver.
2013-06-12 14:52:57 +00:00
ar9285_phy.c
Set the antenna "config group" field.
2013-06-12 15:18:10 +00:00
ar9285_phy.h
Remove the AR9285 specific structure for LNA diversity and use the HAL.
2013-06-12 06:01:53 +00:00
ar9285_reset.c
Migrate the LNA mixing diversity machinery from the AR9285 HAL to the driver.
2013-06-12 14:52:57 +00:00
ar9285an.h
Break out the AR9285 analog registers from ar5416/ar5416phy.h and put
2011-05-12 10:11:24 +00:00
ar9285phy.h
Port over the AR9285 PA calibration and initial calibration code from
2011-03-11 11:58:54 +00:00
ar9285v2.ini
Commit updated AR9285 (Kite) v2 initvals from ath9k.
2011-01-25 05:36:29 +00:00
ar9287.c
Add the 11n chipset RF frontends to the linker set, even though they're not
2011-12-15 00:59:11 +00:00
ar9287.h
Remove unused #define's.
2011-12-23 04:05:39 +00:00
ar9287.ini
Bring over my AR9287 work in progress.
2011-05-26 09:15:33 +00:00
ar9287_attach.c
Bring over the basic spectral scan framework code from Qualcomm Atheros.
2013-01-02 00:38:01 +00:00
ar9287_cal.c
Bring over my AR9287 work in progress.
2011-05-26 09:15:33 +00:00
ar9287_cal.h
Bring over my AR9287 work in progress.
2011-05-26 09:15:33 +00:00
ar9287_olc.c
Add some open-loop TX power debugging for AR9287.
2011-05-26 16:52:37 +00:00
ar9287_olc.h
Flesh out the TX power calibration for the AR9287.
2011-05-26 14:29:05 +00:00
ar9287_reset.c
Setup needed tables for TPC on AR5416->AR9287 chips.
2013-04-17 07:31:53 +00:00
ar9287_reset.h
Bring over my AR9287 work in progress.
2011-05-26 09:15:33 +00:00
ar9287an.h
Bring over my AR9287 work in progress.
2011-05-26 09:15:33 +00:00
ar9287phy.h
Bring over my AR9287 work in progress.
2011-05-26 09:15:33 +00:00
de98311f50