upstream/opnsense-src
1
0
Fork 0
mirror of https://github.com/opnsense/src.git synced 2026-03-13 06:02:46 -04:00
Code Issues Projects Releases Packages Wiki Activity Actions
opnsense-src/sys/mips/conf
History
Warner Losh 0a99422970 Move mips and arm to 1000Hz by default. 
armv6 and armv7 systems already were 1000Hz. The other armv5 were a
mix of 100 and 1000. This changes them to 1000. Should there be
issues, we can add options HZ=100 to the systems that have bad
performance at the drop of a hat.

mips is a lot more complicated. But most of the systems are already
1000HZ. The hardware exceptions are all fast enough to run at
1000Hz. MALTA is our primary emulator, and history has shown emulators
tend to like 100Hz better, so run those systems at 100Hz. As with arm,
any system that shows a huge performance regression can reverted to
100Hz easily.

This was going to be committed well in advance of the 13 branch, but
it was delayed and forgotten til now.

Discussed on:	#bsdmips ages ago
Sponsored by:	Netflix
2021-06-16 20:00:14 -06:00
..
ALFA_HORNET_UB Modularize xz. 2019-02-26 19:55:03 +00:00
ALFA_HORNET_UB.hints
AP91 Modularize xz. 2019-02-26 19:55:03 +00:00
AP91.hints
AP93 Modularize xz. 2019-02-26 19:55:03 +00:00
AP93.hints [AP93] fix up the arge0/arge1 hints. 2017-05-29 07:57:01 +00:00
AP94 Modularize xz. 2019-02-26 19:55:03 +00:00
AP94.hints
AP96 Modularize xz. 2019-02-26 19:55:03 +00:00
AP96.hints
AP121 Modularize xz. 2019-02-26 19:55:03 +00:00
AP121.hints
AP135 Modularize xz. 2019-02-26 19:55:03 +00:00
AP135.hints [atheros] teach these two boards about the new hints location as well. 2018-02-01 22:00:38 +00:00
AP143 Modularize xz. 2019-02-26 19:55:03 +00:00
AP143.hints [atheros] teach these two boards about the new hints location as well. 2018-02-01 22:00:38 +00:00
AR71XX_BASE Move mips and arm to 1000Hz by default. 2021-06-16 20:00:14 -06:00
AR71XX_BASE.hints
AR91XX_BASE.hints
AR724X_BASE.hints
AR933X_BASE.hints [atheros] Fix-up the base address stuff after I did a drive-by with the calibration data location. 2018-02-01 21:58:52 +00:00
AR934X_BASE.hints [ar71xx] Start migrating the AR934x based boards over to the new world order. 2017-07-06 04:06:25 +00:00
AR5312_BASE.hints [ar531x] add default configs for AR531x ports. 2016-10-06 20:37:23 +00:00
AR5315_BASE.hints [ar531x] add default configs for AR531x ports. 2016-10-06 20:37:23 +00:00
BCM sys: Remove DEV_RANDOM device option 2019-06-21 00:16:30 +00:00
BCM.hints bhnd(4): Implement NVRAM support required for PMU bring-up. 2016-08-16 21:32:05 +00:00
BERI_DE4.hints
BERI_DE4_BASE Add support for extended descriptor format to Altera mSGDMA driver. 2019-06-27 18:08:18 +00:00
BERI_DE4_MDROOT Mark the mostly redundant kernels that just pull 2015-11-19 01:58:12 +00:00
BERI_DE4_SDROOT Fix and shorten BERI kernel builds during universe. 2017-02-23 20:41:55 +00:00
BERI_NETFPGA_MDROOT Rename BERI_TEMPLATE to std.BERI to be more like other configs. 2017-02-21 17:34:27 +00:00
BERI_SIM_BASE Fix and shorten BERI kernel builds during universe. 2017-02-23 20:41:55 +00:00
BERI_SIM_MDROOT Mark the mostly redundant kernels that just pull 2015-11-19 01:58:12 +00:00
BERI_SIM_SDROOT Mark the mostly redundant kernels that just pull 2015-11-19 01:58:12 +00:00
BERI_SIM_VIRTIO Mark the mostly redundant kernels that just pull 2015-11-19 01:58:12 +00:00
BERI_SOCKIT kernel: Fix several typos and minor errors 2017-12-27 03:23:21 +00:00
BERI_TPAD.hints
CANNA Add jz4780 AIC (Audio Interface Controller) driver. 2016-12-20 18:27:53 +00:00
CARAMBOLA2 Modularize xz. 2019-02-26 19:55:03 +00:00
CARAMBOLA2.hints [ar933x] make carambola2 work again! 2017-07-23 07:10:41 +00:00
CI20 Add note to 32-bit mips smp config files documenting the status 2018-12-19 23:22:14 +00:00
DB120 Modularize xz. 2019-02-26 19:55:03 +00:00
DB120.hints [ar71xx] Fix DB120 AHB device hints in the new world order. 2018-02-05 04:48:41 +00:00
DEFAULTS
DIR-655A1 Modularize xz. 2019-02-26 19:55:03 +00:00
DIR-655A1.hints Update the board MAC address configuration for the DIR-655A1. 2015-04-05 20:56:51 +00:00
DIR-825B1 sys: Remove DEV_RANDOM device option 2019-06-21 00:16:30 +00:00
DIR-825B1.hints Migrate these configs to use the geom map search function. 2015-03-21 06:18:25 +00:00
DIR-825C1 Remove duplicate options. 2019-03-23 18:32:28 +00:00
DIR-825C1.hints [atheros] Fix DIR-825C1 to use the new hints. 2018-02-01 22:01:11 +00:00
ENH200 Modularize xz. 2019-02-26 19:55:03 +00:00
ENH200.hints
ERL sys/*/conf/*, docs: fix links to handbook 2021-05-20 09:27:10 +01:00
JZ4780 hid: Import functions and constants required by new subsystem 2021-01-08 02:18:42 +03:00
JZ4780.hints Bring in support for Ingenic XBurst JZ4780 and 2016-11-19 17:46:18 +00:00
MALTA Split MALTA board config to big and little endian versions. 2016-11-23 11:56:22 +00:00
MALTA.hints
MALTA64 Update MIPS kernel builds to work with mips-gcc. 2019-10-15 17:11:42 +00:00
MALTA64EL Update MIPS kernel builds to work with mips-gcc. 2019-10-15 17:11:42 +00:00
MALTAEL Split MALTA board config to big and little endian versions. 2016-11-23 11:56:22 +00:00
MT7620.hints Add initial configuration files for the MT7620 and RT5350 SoCs. 2015-12-25 00:58:41 +00:00
MT7620A_FDT Modularize xz. 2019-02-26 19:55:03 +00:00
MT7620N_FDT Modularize xz. 2019-02-26 19:55:03 +00:00
MT7621_FDT Modularize xz. 2019-02-26 19:55:03 +00:00
MT7628_FDT Modularize xz. 2019-02-26 19:55:03 +00:00
OCTEON1 sys/*/conf/*, docs: fix links to handbook 2021-05-20 09:27:10 +01:00
OCTEON1.hints
ONIONOMEGA Modularize xz. 2019-02-26 19:55:03 +00:00
ONIONOMEGA.hints Add I2C device hints for Onion Omega 2017-02-09 15:16:08 +00:00
PB47 Modularize xz. 2019-02-26 19:55:03 +00:00
PB47.hints
PB92 Move mips and arm to 1000Hz by default. 2021-06-16 20:00:14 -06:00
PB92.hints
PICOSTATION_M2HP sys: Remove DEV_RANDOM device option 2019-06-21 00:16:30 +00:00
PICOSTATION_M2HP.hints Fix arge0 mdio bus 2017-02-28 21:39:08 +00:00
QCA953X_BASE Move mips and arm to 1000Hz by default. 2021-06-16 20:00:14 -06:00
QCA953X_BASE.hints [atheros] Update QCA953x support to use the new hints. 2018-02-01 22:01:53 +00:00
QCA955X_BASE.hints [atheros] Teach the QCA955x SoC code about the new hints stuff. 2018-02-01 22:00:05 +00:00
ROCKET_M2HP Modularize xz. 2019-02-26 19:55:03 +00:00
ROCKET_M2HP.hints Add Ubiquiti Rocket M support 2017-02-28 22:49:45 +00:00
ROUTERSTATION Modularize xz. 2019-02-26 19:55:03 +00:00
ROUTERSTATION.hints [ar71xx] Fix routerstation / routerstation pro redboot FIS probing 2021-02-25 13:14:55 -08:00
ROUTERSTATION_MFS Modularize xz. 2019-02-26 19:55:03 +00:00
RSPRO Modularize xz. 2019-02-26 19:55:03 +00:00
RSPRO.hints [ar71xx] Fix routerstation / routerstation pro redboot FIS probing 2021-02-25 13:14:55 -08:00
RSPRO_MFS Modularize xz. 2019-02-26 19:55:03 +00:00
RSPRO_STANDALONE Modularize xz. 2019-02-26 19:55:03 +00:00
RT305X.hints
RT2880_FDT [mips] [rt2880] Add oldest Ralink MIPS SOC RT2880 support code. 2017-05-06 06:20:34 +00:00
RT3050_FDT Modularize xz. 2019-02-26 19:55:03 +00:00
RT3352_FDT Modularize xz. 2019-02-26 19:55:03 +00:00
RT3883_FDT Modularize xz. 2019-02-26 19:55:03 +00:00
RT5350.hints Add initial configuration files for the MT7620 and RT5350 SoCs. 2015-12-25 00:58:41 +00:00
RT5350_FDT Modularize xz. 2019-02-26 19:55:03 +00:00
std.AR91XX Move mips and arm to 1000Hz by default. 2021-06-16 20:00:14 -06:00
std.AR724X Move mips and arm to 1000Hz by default. 2021-06-16 20:00:14 -06:00
std.AR933X Move mips and arm to 1000Hz by default. 2021-06-16 20:00:14 -06:00
std.AR934X Move mips and arm to 1000Hz by default. 2021-06-16 20:00:14 -06:00
std.AR5312 Move mips and arm to 1000Hz by default. 2021-06-16 20:00:14 -06:00
std.AR5315 Move mips and arm to 1000Hz by default. 2021-06-16 20:00:14 -06:00
std.AR_MIPS_BASE sys: Remove DEV_RANDOM device option 2019-06-21 00:16:30 +00:00
std.BERI Update MIPS kernel builds to work with mips-gcc. 2019-10-15 17:11:42 +00:00
std.MALTA Move mips and arm to 1000Hz by default. 2021-06-16 20:00:14 -06:00
std.QCA955X Move mips and arm to 1000Hz by default. 2021-06-16 20:00:14 -06:00
std.XLP Move mips and arm to 1000Hz by default. 2021-06-16 20:00:14 -06:00
TL-ARCHERC7V2 Modularize xz. 2019-02-26 19:55:03 +00:00
TL-ARCHERC7V2.hints Add initial support for the TP-Link Archer C7 v2. 2015-07-03 06:09:56 +00:00
TL-WDR4300 [atheros] [mips] Add the GPIO driver (back) to the TL-WDR3600/TL-WDR4300 kernel. 2019-12-17 00:00:03 +00:00
TL-WDR4300.hints [ar71xx] Fix the TL-wdr3600/tl-wdr4300 hints in the new world order. 2018-02-07 09:35:47 +00:00
TL-WR740Nv4 Modularize xz. 2019-02-26 19:55:03 +00:00
TL-WR740Nv4.hints Add support for the TP-Link TL-WR740N v4. 2015-10-22 08:08:06 +00:00
TL-WR1043NDv2 Modularize xz. 2019-02-26 19:55:03 +00:00
TL-WR1043NDv2.hints Migrate the TL-WR1043nd v2 to use the new map based MAC hints mechanism. 2015-04-01 06:44:39 +00:00
TP-MR3020 [ar9330] ok, fine, I'll finally undo the 2011-era mistake of _BASE config files. 2016-08-03 19:18:53 +00:00
TP-MR3020.hints Correctly use the default values for location of MAC addrs of arge0, 2015-10-18 04:50:51 +00:00
TP-MR3040 Modularize xz. 2019-02-26 19:55:03 +00:00
TP-MR3040.hints Add kernel support for the TP-LINK MR3040. 2017-03-01 05:53:53 +00:00
TP-WN1043ND Modularize xz. 2019-02-26 19:55:03 +00:00
TP-WN1043ND.hints
WZR-300HP sys: Remove DEV_RANDOM device option 2019-06-21 00:16:30 +00:00
WZR-300HP.hints Set correct argemdio addr, comment out arge1 as its not physically 2015-10-04 22:50:37 +00:00
WZR-HPAG300H sys: Remove DEV_RANDOM device option 2019-06-21 00:16:30 +00:00
WZR-HPAG300H.hints Switch is an 8316, so make the comments say that. 2014-12-03 23:37:23 +00:00
X1000 Update MIPS kernel builds to work with mips-gcc. 2019-10-15 17:11:42 +00:00
X1000.hints Bring in support for Ingenic XBurst JZ4780 and 2016-11-19 17:46:18 +00:00
XLP.hints Remove the old ds1374 driver and use the ds13rtc driver instead. Adjust 2017-08-13 22:07:42 +00:00
XLP64 sys/*/conf/*, docs: fix links to handbook 2021-05-20 09:27:10 +01:00
XLPN32 sys/*/conf/*, docs: fix links to handbook 2021-05-20 09:27:10 +01:00