upstream/opnsense-src
1
0
Fork 0
mirror of https://github.com/opnsense/src.git synced 2026-04-15 14:29:58 -04:00
Code Issues Projects Releases Packages Wiki Activity Actions
opnsense-src/sys/dev
History
Marius Strobl efd4fc3fb3 o Flesh out the generic IEEE 802.3 annex 31B full duplex flow control 
support in mii(4):
  - Merge generic flow control advertisement (which can be enabled by
    passing by MIIF_DOPAUSE to mii_attach(9)) and parsing support from
    NetBSD into mii_physubr.c and ukphy_subr.c. Unlike as in NetBSD,
    IFM_FLOW isn't implemented as a global option via the "don't care
    mask" but instead as a media specific option this. This has the
    following advantages:
    o allows flow control advertisement with autonegotiation to be
      turned on and off via ifconfig(8) with the default typically
      being off (though MIIF_FORCEPAUSE has been added causing flow
      control to be always advertised, allowing to easily MFC this
      changes for drivers that previously used home-grown support for
      flow control that behaved that way without breaking POLA)
    o allows to deal with PHY drivers where flow control advertisement
      with manual selection doesn't work or at least isn't implemented,
      like it's the case with brgphy(4), e1000phy(4) and ip1000phy(4),
      by setting MIIF_NOMANPAUSE
    o the available combinations of media options are readily available
      from the `ifconfig -m` output
  - Add IFM_FLOW to IFM_SHARED_OPTION_DESCRIPTIONS and IFM_ETH_RXPAUSE
    and IFM_ETH_TXPAUSE to IFM_SUBTYPE_ETHERNET_OPTION_DESCRIPTIONS so
    these are understood by ifconfig(8).
o Make the master/slave support in mii(4) actually usable:
  - Change IFM_ETH_MASTER from being implemented as a global option via
    the "don't care mask" to a media specific one as it actually is only
    applicable to IFM_1000_T to date.
  - Let mii_phy_setmedia() set GTCR_MAN_MS in IFM_1000_T slave mode to
    actually configure manually selected slave mode (like we also do in
    the PHY specific implementations).
  - Add IFM_ETH_MASTER to IFM_SUBTYPE_ETHERNET_OPTION_DESCRIPTIONS so it
    is understood by ifconfig(8).
o Switch bge(4), bce(4), msk(4), nfe(4) and stge(4) along with brgphy(4),
  e1000phy(4) and ip1000phy(4) to use the generic flow control support
  instead of home-grown solutions via IFM_FLAGs. This includes changing
  these PHY drivers and smcphy(4) to no longer unconditionally advertise
  support for flow control but only if the selected media has IFM_FLOW
  set (or MIIF_FORCEPAUSE is set) and implemented for these media variants,
  i.e. typically only for copper.
o Switch brgphy(4), ciphy(4), e1000phy(4) and ip1000phy(4) to report and
  set IFM_1000_T master mode via IFM_ETH_MASTER instead of via IFF_LINK0
  and some IFM_FLAGn.
o Switch brgphy(4) to add at least the the supported copper media based on
  the contents of the BMSR via mii_phy_add_media() instead of hardcoding
  them. The latter approach seems to have developed historically, besides
  causing unnecessary code duplication it was also undesirable because
  brgphy_mii_phy_auto() already based the capability advertisement on the
  contents of the BMSR though.
o Let brgphy(4) set IFM_1000_T master mode on all supported PHY and not
  just BCM5701. Apparently this was a misinterpretation of a workaround
  in the Linux tg3 driver; BCM5701 seem to require RGPHY_1000CTL_MSE and
  BRGPHY_1000CTL_MSC to be set when configuring autonegotiation but
  this doesn't mean we can't set these as well on other PHYs for manual
  media selection.
o Let ukphy_status() report IFM_1000_T master mode via IFM_ETH_MASTER so
  IFM_1000_T master mode support now is generally available with all PHY
  drivers.
o Don't let e1000phy(4) set master/slave bits for IFM_1000_SX as it's
  not applicable there.

Reviewed by:	yongari (plus additional testing)
Obtained from:	NetBSD (partially), OpenBSD (partially)
MFC after:	2 weeks
2010-11-14 13:26:10 +00:00
..
aac Previously, the aac driver did not handle enclosure management AIFs, 2010-09-29 14:22:00 +00:00
acpi_support Remove an unnecessary hack from ACPICA 20100915 (r212761). 2010-09-16 20:11:40 +00:00
acpica Create C1 state when _CST is valid but _CST does not have one. Some BIOSes 2010-11-12 17:10:12 +00:00
adb Add support for interpreting taps on ADB touchpads as a button click. 2009-11-28 17:48:25 +00:00
adlink Update d_mmap() to accept vm_ooffset_t and vm_memattr_t. 2009-12-29 21:51:28 +00:00
advansys Separate the parallel scsi knowledge out of the core of the XPT, and 2009-07-10 08:18:08 +00:00
ae Convert the PHY drivers to honor the mii_flags passed down and convert 2010-10-15 14:52:11 +00:00
age Convert the PHY drivers to honor the mii_flags passed down and convert 2010-10-15 14:52:11 +00:00
agp Add a driver for the Apple Uninorth AGP host bridge found in all PowerPC 2010-10-31 18:27:05 +00:00
aha Pass bus_get_dma_tag() into the first argument of bus_dma_create_tag() 2008-10-07 23:55:32 +00:00
ahb Fix a compile error from the last change. 2007-06-17 15:21:09 +00:00
ahci Teach ahci(4), siis(4) and ATA_CAM ata(4) wrapper report to CAM residual 2010-11-08 15:36:15 +00:00
aic Snip redundant assignment. 2009-05-13 22:31:25 +00:00
aic7xxx Revert r213765. This is required because our build infrastructure uses 2010-10-14 19:19:19 +00:00
alc Don't bother to enable ASPM L1 to save more power. Even though I am 2010-10-30 01:12:54 +00:00
ale Convert the PHY drivers to honor the mii_flags passed down and convert 2010-10-15 14:52:11 +00:00
amd Remove extraneous semicolons, no functional changes. 2010-01-07 21:01:37 +00:00
amdsbwd amdsbwd: fix nonsensical timeout calculations 2010-05-31 09:07:23 +00:00
amdtemp Restore (undocumented) support for early revisions and add more comments. 2009-09-14 23:08:19 +00:00
amr Fix clang warning on empty statement. 2010-07-28 16:24:11 +00:00
an Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
arcmsr Workaround build for PAE case for now - revert the PHYS 2010-11-14 05:05:41 +00:00
asmc Use %zu for size_t. 2009-09-14 21:33:00 +00:00
asr MFp4: Large set of CAM inprovements. 2010-01-28 08:41:30 +00:00
ata Fix typos. 2010-11-09 10:59:09 +00:00
ath Fix indenting/whitespace issues introduced by me. 2010-08-15 11:40:53 +00:00
atkbdc bus_add_child: change type of order parameter to u_int 2010-09-10 11:19:03 +00:00
auxio Enroll these drivers in multipass probing. The motivation behind this 2009-12-22 21:02:46 +00:00
bce o Flesh out the generic IEEE 802.3 annex 31B full duplex flow control 2010-11-14 13:26:10 +00:00
bfe Convert the PHY drivers to honor the mii_flags passed down and convert 2010-10-15 14:52:11 +00:00
bge o Flesh out the generic IEEE 802.3 annex 31B full duplex flow control 2010-11-14 13:26:10 +00:00
bktr Fix build on architectures where PAGE_SIZE is a long (sparc64, powerpc). 2010-07-13 19:27:20 +00:00
bm Convert the PHY drivers to honor the mii_flags passed down and convert 2010-10-15 14:52:11 +00:00
buslogic Prepare for future integration between CAM and newbus. xpt_bus_register 2007-06-17 05:55:54 +00:00
bwi Instead of using the AMRR ratectl algo as default for drivers which have 2010-11-06 18:17:20 +00:00
bwn Instead of using the AMRR ratectl algo as default for drivers which have 2010-11-06 18:17:20 +00:00
cardbus Move the PCI-specific logic of removing a cardbus device into a 2010-01-05 20:42:25 +00:00
cas Convert the PHY drivers to honor the mii_flags passed down and convert 2010-10-15 14:52:11 +00:00
ce Revert r213793. 2010-10-13 17:38:23 +00:00
cfe Start using the 'init_static_kenv()' API provided by r198561 to initialize 2010-08-11 02:13:50 +00:00
cfi Convert Freescale PowerPC platforms to FDT convention. 2010-07-11 21:08:29 +00:00
ciss Cosmetic: make it less confusing when displaying RAID 1 level, that might 2010-10-02 08:18:19 +00:00
cm Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
cmx Commit cmx(4), a driver for Omnikey CardMan 4040 PCMCIA smartcard readers. 2008-03-06 08:09:45 +00:00
coretemp Catch known CPUs before using IA32_TEMPERATURE_TARGET. 2010-08-04 00:25:13 +00:00
cp Revert r213793. 2010-10-13 17:38:23 +00:00
cpuctl - Add support to atomically set/clear individual bits of a MSR register 2009-06-30 12:35:47 +00:00
cpufreq Attach the cpufreq child devices with specific orders to enforce relative 2008-08-13 16:09:40 +00:00
cs Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
ct Spell "Hz" correctly wherever it is user-visible. 2010-01-12 17:59:58 +00:00
ctau Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
cx Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
cxgb Re-add r212370 now that the LOR in powerpc64 has been resolved: 2010-09-16 16:13:12 +00:00
cy o break newbus api: add a new argument of type driver_filter_t to 2007-02-23 12:19:07 +00:00
dc Convert the PHY drivers to honor the mii_flags passed down and convert 2010-10-15 23:34:31 +00:00
dcons Last minute TTY API change: remove mutex argument from tty_alloc(). 2009-05-29 06:41:23 +00:00
de Remove extraneous semicolons, no functional changes. 2010-01-07 21:01:37 +00:00
digi Remove unused files from the digi(4) driver. 2009-01-16 14:45:48 +00:00
dpms Attach dpms(4) to vgapm and make sure to restore DPMS state after 2009-12-15 19:58:23 +00:00
dpt Get rid of #ident, GCC 4.4 warns about it being deprecated. 2010-01-08 17:20:41 +00:00
drm Fix typos. 2010-11-09 10:59:09 +00:00
e1000 Sync the lem code up with the vlan and other fixes in em. 2010-11-01 20:19:25 +00:00
ed Converted the remainder of the NIC drivers to use the mii_attach() 2010-10-15 15:00:30 +00:00
eisa strict kobj signatures: fix assortment of bus_read_ivar impls 2009-06-11 17:06:58 +00:00
en Hide an unused variable in case we compile with neither INET nor INET6. 2008-11-06 09:41:31 +00:00
ep Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
esp Include <machine/ofw_machdep.h> for OF_getscsinitid(). 2010-05-10 20:02:39 +00:00
et Converted the remainder of the NIC drivers to use the mii_attach() 2010-10-15 15:00:30 +00:00
ex Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
exca CardBus instead of cardbus. 2010-01-03 23:26:29 +00:00
fatm Remove extraneous semicolons, no functional changes. 2010-01-07 21:01:37 +00:00
fb Fix segment:offset calculation of interrupt vector for relocated video BIOS 2010-09-13 19:58:46 +00:00
fdc Fix a regression from r200554, which broke fdc(4) attachment to acpi(4). 2010-05-30 03:45:41 +00:00
fdt Eliminate FDT_IMMR_VA define. 2010-07-19 18:47:18 +00:00
fe Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
firewire Fix grammar. 2010-10-18 14:26:29 +00:00
flash Add s25sl064a, an 8mb SPI flash part. 2010-08-17 16:27:13 +00:00
fxp Add TSO support over VLAN for i82550/i82551. Controller requires 2010-10-24 21:59:51 +00:00
gem Convert the PHY drivers to honor the mii_flags passed down and convert 2010-10-15 14:52:11 +00:00
glxsb Fix two possible (but unlikely) NULL-pointer dereferences in glxsb(4). 2008-11-17 07:09:40 +00:00
gpio Add a GPIO driver for the Gateworks Cambria platform. 2010-11-11 20:18:33 +00:00
hatm Remove extraneous semicolons, no functional changes. 2010-01-07 21:01:37 +00:00
hifn - Do not place variables to memory allocated by busdma. pre/post ops 2010-09-24 04:46:46 +00:00
hme Convert the PHY drivers to honor the mii_flags passed down and convert 2010-10-15 14:52:11 +00:00
hptiop Report transport type in XPT_PATH_INQ. 2010-06-19 13:41:17 +00:00
hptmv Report transport type in XPT_PATH_INQ. 2010-06-19 13:42:14 +00:00
hptrr Pass a format string to make_dev(). 2010-10-13 14:41:52 +00:00
hwpmc Fix two aliases that had the same name but were pointing to different 2010-10-04 17:22:18 +00:00
ic Merge from projects/mips to head by hand: 2010-01-11 04:13:06 +00:00
ichsmb Add support for Intel Cougar Point SMBus controller. 2010-08-27 23:24:08 +00:00
ichwd Add Intel Cougar Point PCH LPC Controller Device IDs 2010-08-28 00:09:46 +00:00
ida o break newbus api: add a new argument of type driver_filter_t to 2007-02-23 12:19:07 +00:00
ie Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
ieee488 GPIB overhaul, part #2: make the tnt4882 driver work with the newer 2010-02-01 21:21:10 +00:00
if_ndis There is no reason to call rt_ifmsg(), remove it. 2010-10-19 19:11:36 +00:00
iicbus Provide support for IIC_M_NOSTOP/IIC_M_NOSTART for bit-banging and 2010-11-08 19:53:16 +00:00
iir Get rid of #ident. 2010-01-08 20:40:28 +00:00
io - Extract the IODEV_PIO interface from ia64 and make it MI. 2010-04-28 15:38:01 +00:00
ipmi Fix test for double-nul characters that terminate the string table at 2010-07-29 13:46:37 +00:00
ips Fix argument order in a call to mtx_init. 2009-12-17 00:21:12 +00:00
ipw Enable 5.5 and 11Mbit TX rates. 2010-05-11 17:14:17 +00:00
iscsi/initiator Remove the freelist, which simply duplicates some of the zone allocator's 2010-09-02 14:13:43 +00:00
isp Fix typos. 2010-11-09 10:59:09 +00:00
ispfw Don't spam dmesg with "registered firmware ..." when module is compiled 2010-03-05 03:37:42 +00:00
iwi The firmware does pad notifications to an even number of bytes (at least 2010-10-23 11:26:22 +00:00
iwn Instead of using the AMRR ratectl algo as default for drivers which have 2010-11-06 18:17:20 +00:00
ixgb Do not allocate multicast array memory in multicast filter 2010-08-28 00:34:22 +00:00
ixgbe Fix typos. 2010-11-09 10:59:09 +00:00
jme Convert the PHY drivers to honor the mii_flags passed down and convert 2010-10-15 14:52:11 +00:00
joy Use si_drv1 to store joy(4)'s softc. 2009-04-14 11:23:09 +00:00
kbd Explicitly tell the compiler that we don't care about the return value 2010-10-13 11:37:12 +00:00
kbdmux Explicitly tell the compiler that we don't care about the return value 2010-10-13 11:37:12 +00:00
ksyms Update d_mmap() to accept vm_ooffset_t and vm_memattr_t. 2009-12-29 21:51:28 +00:00
le Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
led Fix an incorrect use of sbuf_overflowed() after a call to sbuf_finish(). 2010-09-09 18:35:08 +00:00
lge Converted the remainder of the NIC drivers to use the mii_attach() 2010-10-15 15:00:30 +00:00
lindev lindev(4) [1] is supposed to be a collection of linux-specific pseudo 2009-09-26 12:45:28 +00:00
lmc One more #ifdef fix for GCC 4.4. 2010-01-08 15:57:56 +00:00
malo Fix firmware module dependencies. 2010-09-10 08:11:48 +00:00
mc146818 Remove clause 3 from Izumi Tsutsui's licenses. 2009-12-25 22:58:43 +00:00
mca strict kobj signatures: fix assortment of bus_read_ivar impls 2009-06-11 17:06:58 +00:00
mcd
md Allow the MDIOCATTACH ioctl operation to originate from within the kernel. 2010-10-18 04:26:32 +00:00
mem
mfi Update PD state firmware definitions: add copyback, system. 2010-10-21 10:38:52 +00:00
mge Convert the PHY drivers to honor the mii_flags passed down and convert 2010-10-15 14:52:11 +00:00
mii o Flesh out the generic IEEE 802.3 annex 31B full duplex flow control 2010-11-14 13:26:10 +00:00
mk48txx Fix botches in r201005: 2010-01-01 22:47:53 +00:00
mlx Temporarily revert the new-bus locking for 8.0 release. It will be 2009-08-20 19:17:53 +00:00
mly MFp4: Large set of CAM inprovements. 2010-01-28 08:41:30 +00:00
mmc Report relative card address to NewBus as location string. 2010-05-23 09:44:48 +00:00
mn Move mn over. One of the last stragglers in sys/pci. There's no 2008-11-02 17:04:54 +00:00
mps Currently only opt_compat.h is included by the mps(4) driver. Also 2010-10-15 15:24:59 +00:00
mpt Take mpt_req_on_{free,pending}_list() out from under INVARIANTS as these 2010-09-24 23:54:03 +00:00
mse Make mse(4) use si_drv1, instead of using unit numbers. 2009-04-20 15:15:24 +00:00
msk o Flesh out the generic IEEE 802.3 annex 31B full duplex flow control 2010-11-14 13:26:10 +00:00
mvs Workaround strange situation when EDMA_RESQIP register returns zero instead 2010-10-20 07:47:31 +00:00
mwl Fix firmware module dependencies. 2010-09-10 08:11:48 +00:00
mxge Add interrupt descriptions for mxge's msi-x vectors 2010-05-21 15:57:24 +00:00
my Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
ncv strict kobj sigs: fix assortment of device_detach and device_shutdown impls 2009-06-11 17:14:28 +00:00
nfe o Flesh out the generic IEEE 802.3 annex 31B full duplex flow control 2010-11-14 13:26:10 +00:00
nge Converted the remainder of the NIC drivers to use the mii_attach() 2010-10-15 15:00:30 +00:00
nmdm - Remove an unnecessary memory barrier from an atomic op. 2009-06-09 13:33:03 +00:00
nsp strict kobj sigs: fix assortment of device_detach and device_shutdown impls 2009-06-11 17:14:28 +00:00
null Mark /dev/zero and /dev/null as eternal. 2010-08-06 09:47:48 +00:00
nve Converted the remainder of the NIC drivers to use the mii_attach() 2010-10-15 15:00:30 +00:00
nvram - Use an sx lock to serialize writes since they update the checksum. 2008-08-01 20:39:18 +00:00
nxge Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
ofw Return IEEE 1275 compliant error codes. 2010-11-11 13:42:46 +00:00
patm Remove extraneous semicolons, no functional changes. 2010-01-07 21:01:37 +00:00
pbio Replace all calls to minor() with dev2unit(). 2008-09-27 08:51:18 +00:00
pccard Fix typos. 2010-11-09 10:59:09 +00:00
pccbb Temporarily revert the new-bus locking for 8.0 release. It will be 2009-08-20 19:17:53 +00:00
pcf strict kobj signatures: fix iicbus_write impl in dev/pcf 2009-06-11 17:15:44 +00:00
pci The EHCI_CAPLENGTH and EHCI_HCIVERSION registers are actually sub-registers 2010-10-25 15:51:43 +00:00
pcn Convert the PHY drivers to honor the mii_flags passed down and convert 2010-10-15 14:52:11 +00:00
pdq Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
powermac_nvram Add support for the Sharp/Micron flash chips to powermac_mvram(4). 2010-09-05 20:04:02 +00:00
ppbus bus_add_child: change type of order parameter to u_int 2010-09-10 11:19:03 +00:00
ppc Add PCI ID for MCS9901's parallel port. 2010-03-23 20:08:18 +00:00
pst Temporarily revert the new-bus locking for 8.0 release. It will be 2009-08-20 19:17:53 +00:00
pty Move ptmx into pty(4). 2009-09-06 10:27:45 +00:00
puc Add support for the Perle Speed4 LE. 2010-05-20 13:16:42 +00:00
quicc Convert Freescale PowerPC platforms to FDT convention. 2010-07-11 21:08:29 +00:00
ral Instead of using the AMRR ratectl algo as default for drivers which have 2010-11-06 18:17:20 +00:00
random Use the fpu_kern_enter() interface to properly separate usermode FPU 2010-06-05 16:00:53 +00:00
rc o break newbus api: add a new argument of type driver_filter_t to 2007-02-23 12:19:07 +00:00
re Only moderate TX completion interrupts. Relying on taskqueue to 2010-11-09 01:52:09 +00:00
rndtest
rp These checks against BUSY aren't needed: the newbus layer does this 2009-09-05 08:38:25 +00:00
safe Remove extraneous semicolons, no functional changes. 2010-01-07 21:01:37 +00:00
sbni Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
scc Make iclear return int, since that matches all function definitions of it. 2009-02-05 19:32:34 +00:00
scd Use pause() rather than tsleep() on stack variables and function pointers. 2007-02-27 17:23:29 +00:00
sdhci Add support for interruptless kernel dumping. 2009-02-17 19:12:15 +00:00
sec Convert Freescale PowerPC platforms to FDT convention. 2010-07-11 21:08:29 +00:00
sf Converted the remainder of the NIC drivers to use the mii_attach() 2010-10-15 15:00:30 +00:00
sge Converted the remainder of the NIC drivers to use the mii_attach() 2010-10-15 15:00:30 +00:00
si Last minute TTY API change: remove mutex argument from tty_alloc(). 2009-05-29 06:41:23 +00:00
siba bus_add_child: change type of order parameter to u_int 2010-09-10 11:19:03 +00:00
siis Teach ahci(4), siis(4) and ATA_CAM ata(4) wrapper report to CAM residual 2010-11-08 15:36:15 +00:00
sio remove now-redunant cardbus attachment. 2009-03-09 13:23:54 +00:00
sis Correct handling of shared interrupt in sis_intr(). r212116 incorrectly 2010-10-20 00:19:25 +00:00
sk Fix a long standing bug in programming station address for Yukon 2010-11-06 22:07:22 +00:00
smbus Make generic_intr routines match prototype. 2009-03-09 13:30:00 +00:00
smc Converted the remainder of the NIC drivers to use the mii_attach() 2010-10-15 15:00:30 +00:00
sn Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
snc Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
snp Add ttydisc_rint_simple(). 2009-08-23 08:04:40 +00:00
sound Fix typos. 2010-11-09 10:59:09 +00:00
speaker Change the type of uio_resid member of struct uio from int to ssize_t. 2009-06-25 18:46:30 +00:00
spibus bus_add_child: change type of order parameter to u_int 2010-09-10 11:19:03 +00:00
ste Convert the PHY drivers to honor the mii_flags passed down and convert 2010-10-15 14:52:11 +00:00
stg strict kobj sigs: fix assortment of device_detach and device_shutdown impls 2009-06-11 17:14:28 +00:00
stge o Flesh out the generic IEEE 802.3 annex 31B full duplex flow control 2010-11-14 13:26:10 +00:00
streams The streams ptm code is pretty awful and likely incorrect. I don't know 2009-02-16 20:12:28 +00:00
sym - On sparc64 obtain the initiator ID from the Open Firmware device tree 2010-04-27 18:05:33 +00:00
syscons Fix typos. 2010-11-09 10:59:09 +00:00
tdfx Update d_mmap() to accept vm_ooffset_t and vm_memattr_t. 2009-12-29 21:51:28 +00:00
ti Neither the page lock nor the page queues lock is required to unwire and 2010-05-03 15:51:59 +00:00
tl - Add IFM_10_2 and IFM_10_5 media via tlphy(4) only in case the respective 2010-10-24 12:51:02 +00:00
tpm Add tpm(4) driver for Trusted Platform Module. 2010-08-12 00:16:18 +00:00
trm MFp4: Large set of CAM inprovements. 2010-01-28 08:41:30 +00:00
tsec Convert the PHY drivers to honor the mii_flags passed down and convert 2010-10-15 14:52:11 +00:00
twa Fix a compile problem introduced with r212008 on 32bit: 2010-09-04 16:27:14 +00:00
twe Teach twe driver to report array stripe size to GEOM. 2009-12-25 17:34:43 +00:00
tx Converted the remainder of the NIC drivers to use the mii_attach() 2010-10-15 15:00:30 +00:00
txp Make sure rx descriptor ring align on 16 bytes. I guess the 2009-08-31 22:09:48 +00:00
uart Fix typos. 2010-11-09 10:59:09 +00:00
ubsec Cast the bus_size_t to a intmax_t rather than assuming type-punning to 2010-03-29 17:26:24 +00:00
usb Add the switch config for the XS Stick. 2010-11-13 20:45:16 +00:00
utopia Fix a use-after-free. 2007-12-05 19:32:59 +00:00
vge Convert the PHY drivers to honor the mii_flags passed down and convert 2010-10-15 14:52:11 +00:00
vkbd Remove unit2minor() use from kernel code. 2008-09-26 14:19:52 +00:00
vr Convert the PHY drivers to honor the mii_flags passed down and convert 2010-10-15 14:52:11 +00:00
vx Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
watchdog Revisit the watchdogs: Resetting the error to EINVAL after failing to set the 2007-03-27 21:03:37 +00:00
wb Fix indentation in r213894. 2010-11-07 12:29:26 +00:00
wds Prepare for future integration between CAM and newbus. xpt_bus_register 2007-06-17 05:55:54 +00:00
wi Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
wl Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
wpi Instead of using the AMRR ratectl algo as default for drivers which have 2010-11-06 18:17:20 +00:00
xe Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
xen sys/dev/xen/blkback/blkback.c: 2010-10-28 04:14:28 +00:00
xl Correct an inverted check in r213893. 2010-11-05 19:38:28 +00:00