opnsense-src/sys/dev/usb/controller/dwc3.c
Warner Losh 685dc743dc sys: Remove $FreeBSD$: one-line .c pattern
Remove /^[\s*]*__FBSDID\("\$FreeBSD\$"\);?\s*\n/
2023-08-16 11:54:36 -06:00

621 lines
16 KiB
C

/*-
* SPDX-License-Identifier: BSD-2-Clause
*
* Copyright (c) 2019 Emmanuel Vadot <manu@FreeBSD.Org>
* Copyright (c) 2021-2022 Bjoern A. Zeeb <bz@FreeBSD.ORG>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
#include "opt_platform.h"
#include "opt_acpi.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/rman.h>
#include <sys/condvar.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/mutex.h>
#ifdef FDT
#include <sys/gpio.h>
#endif
#include <machine/bus.h>
#include <dev/usb/usb.h>
#include <dev/usb/usbdi.h>
#include <dev/usb/usb_core.h>
#include <dev/usb/usb_busdma.h>
#include <dev/usb/usb_process.h>
#include <dev/usb/usb_controller.h>
#include <dev/usb/usb_bus.h>
#include <dev/usb/controller/xhci.h>
#include <dev/usb/controller/dwc3.h>
#ifdef FDT
#include <dev/fdt/simplebus.h>
#include <dev/fdt/fdt_common.h>
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/ofw_bus_subr.h>
#include <dev/ofw/ofw_subr.h>
#include <dev/extres/clk/clk.h>
#include <dev/extres/phy/phy_usb.h>
#endif
#ifdef DEV_ACPI
#include <contrib/dev/acpica/include/acpi.h>
#include <contrib/dev/acpica/include/accommon.h>
#include <dev/acpica/acpivar.h>
#endif
#include "generic_xhci.h"
struct snps_dwc3_softc {
struct xhci_softc sc;
device_t dev;
struct resource * mem_res;
bus_space_tag_t bst;
bus_space_handle_t bsh;
uint32_t snpsid;
uint32_t snpsversion;
uint32_t snpsrevision;
uint32_t snpsversion_type;
#ifdef FDT
clk_t clk_ref;
clk_t clk_suspend;
clk_t clk_bus;
#endif
};
#define DWC3_WRITE(_sc, _off, _val) \
bus_space_write_4(_sc->bst, _sc->bsh, _off, _val)
#define DWC3_READ(_sc, _off) \
bus_space_read_4(_sc->bst, _sc->bsh, _off)
#define IS_DMA_32B 1
static void
xhci_interrupt_poll(void *_sc)
{
struct xhci_softc *sc = _sc;
USB_BUS_UNLOCK(&sc->sc_bus);
xhci_interrupt(sc);
USB_BUS_LOCK(&sc->sc_bus);
usb_callout_reset(&sc->sc_callout, 1, (void *)&xhci_interrupt_poll, sc);
}
static int
snps_dwc3_attach_xhci(device_t dev)
{
struct snps_dwc3_softc *snps_sc = device_get_softc(dev);
struct xhci_softc *sc = &snps_sc->sc;
int err = 0, rid = 0;
sc->sc_io_res = snps_sc->mem_res;
sc->sc_io_tag = snps_sc->bst;
sc->sc_io_hdl = snps_sc->bsh;
sc->sc_io_size = rman_get_size(snps_sc->mem_res);
sc->sc_irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
RF_SHAREABLE | RF_ACTIVE);
if (sc->sc_irq_res == NULL) {
device_printf(dev, "Failed to allocate IRQ\n");
return (ENXIO);
}
sc->sc_bus.bdev = device_add_child(dev, "usbus", -1);
if (sc->sc_bus.bdev == NULL) {
device_printf(dev, "Failed to add USB device\n");
return (ENXIO);
}
device_set_ivars(sc->sc_bus.bdev, &sc->sc_bus);
sprintf(sc->sc_vendor, "Synopsys");
device_set_desc(sc->sc_bus.bdev, "Synopsys");
if (xhci_use_polling() == 0) {
err = bus_setup_intr(dev, sc->sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE,
NULL, (driver_intr_t *)xhci_interrupt, sc, &sc->sc_intr_hdl);
if (err != 0) {
device_printf(dev, "Failed to setup IRQ, %d\n", err);
sc->sc_intr_hdl = NULL;
return (err);
}
}
err = xhci_init(sc, dev, IS_DMA_32B);
if (err != 0) {
device_printf(dev, "Failed to init XHCI, with error %d\n", err);
return (ENXIO);
}
usb_callout_init_mtx(&sc->sc_callout, &sc->sc_bus.bus_mtx, 0);
if (xhci_use_polling() != 0) {
device_printf(dev, "Interrupt polling at %dHz\n", hz);
USB_BUS_LOCK(&sc->sc_bus);
xhci_interrupt_poll(sc);
USB_BUS_UNLOCK(&sc->sc_bus);
}
err = xhci_start_controller(sc);
if (err != 0) {
device_printf(dev, "Failed to start XHCI controller, with error %d\n", err);
return (ENXIO);
}
device_printf(sc->sc_bus.bdev, "trying to attach\n");
err = device_probe_and_attach(sc->sc_bus.bdev);
if (err != 0) {
device_printf(dev, "Failed to initialize USB, with error %d\n", err);
return (ENXIO);
}
return (0);
}
#ifdef DWC3_DEBUG
static void
snsp_dwc3_dump_regs(struct snps_dwc3_softc *sc, const char *msg)
{
struct xhci_softc *xsc;
uint32_t reg;
if (!bootverbose)
return;
device_printf(sc->dev, "%s: %s:\n", __func__, msg ? msg : "");
reg = DWC3_READ(sc, DWC3_GCTL);
device_printf(sc->dev, "GCTL: %#012x\n", reg);
reg = DWC3_READ(sc, DWC3_GUCTL);
device_printf(sc->dev, "GUCTL: %#012x\n", reg);
reg = DWC3_READ(sc, DWC3_GUCTL1);
device_printf(sc->dev, "GUCTL1: %#012x\n", reg);
reg = DWC3_READ(sc, DWC3_GUSB2PHYCFG0);
device_printf(sc->dev, "GUSB2PHYCFG0: %#012x\n", reg);
reg = DWC3_READ(sc, DWC3_GUSB3PIPECTL0);
device_printf(sc->dev, "GUSB3PIPECTL0: %#012x\n", reg);
reg = DWC3_READ(sc, DWC3_DCFG);
device_printf(sc->dev, "DCFG: %#012x\n", reg);
xsc = &sc->sc;
device_printf(sc->dev, "xhci quirks: %#012x\n", xsc->sc_quirks);
}
static void
snps_dwc3_dump_ctrlparams(struct snps_dwc3_softc *sc)
{
const bus_size_t offs[] = {
DWC3_GHWPARAMS0, DWC3_GHWPARAMS1, DWC3_GHWPARAMS2, DWC3_GHWPARAMS3,
DWC3_GHWPARAMS4, DWC3_GHWPARAMS5, DWC3_GHWPARAMS6, DWC3_GHWPARAMS7,
DWC3_GHWPARAMS8,
};
uint32_t reg;
int i;
for (i = 0; i < nitems(offs); i++) {
reg = DWC3_READ(sc, offs[i]);
if (bootverbose)
device_printf(sc->dev, "hwparams[%d]: %#012x\n", i, reg);
}
}
#endif
static void
snps_dwc3_reset(struct snps_dwc3_softc *sc)
{
uint32_t gctl, ghwp0, phy2, phy3;
ghwp0 = DWC3_READ(sc, DWC3_GHWPARAMS0);
gctl = DWC3_READ(sc, DWC3_GCTL);
gctl |= DWC3_GCTL_CORESOFTRESET;
DWC3_WRITE(sc, DWC3_GCTL, gctl);
phy2 = DWC3_READ(sc, DWC3_GUSB2PHYCFG0);
phy2 |= DWC3_GUSB2PHYCFG0_PHYSOFTRST;
if ((ghwp0 & DWC3_GHWPARAMS0_MODE_MASK) ==
DWC3_GHWPARAMS0_MODE_DUALROLEDEVICE)
phy2 &= ~DWC3_GUSB2PHYCFG0_SUSPENDUSB20;
DWC3_WRITE(sc, DWC3_GUSB2PHYCFG0, phy2);
phy3 = DWC3_READ(sc, DWC3_GUSB3PIPECTL0);
phy3 |= DWC3_GUSB3PIPECTL0_PHYSOFTRST;
if ((ghwp0 & DWC3_GHWPARAMS0_MODE_MASK) ==
DWC3_GHWPARAMS0_MODE_DUALROLEDEVICE)
phy3 &= ~DWC3_GUSB3PIPECTL0_SUSPENDUSB3;
DWC3_WRITE(sc, DWC3_GUSB3PIPECTL0, phy3);
DELAY(1000);
phy2 &= ~DWC3_GUSB2PHYCFG0_PHYSOFTRST;
DWC3_WRITE(sc, DWC3_GUSB2PHYCFG0, phy2);
phy3 &= ~DWC3_GUSB3PIPECTL0_PHYSOFTRST;
DWC3_WRITE(sc, DWC3_GUSB3PIPECTL0, phy3);
gctl &= ~DWC3_GCTL_CORESOFTRESET;
DWC3_WRITE(sc, DWC3_GCTL, gctl);
}
static void
snps_dwc3_configure_host(struct snps_dwc3_softc *sc)
{
uint32_t reg;
reg = DWC3_READ(sc, DWC3_GCTL);
reg &= ~DWC3_GCTL_PRTCAPDIR_MASK;
reg |= DWC3_GCTL_PRTCAPDIR_HOST;
DWC3_WRITE(sc, DWC3_GCTL, reg);
/*
* Enable the Host IN Auto Retry feature, making the
* host respond with a non-terminating retry ACK.
* XXX If we ever support more than host mode this needs a dr_mode check.
*/
reg = DWC3_READ(sc, DWC3_GUCTL);
reg |= DWC3_GUCTL_HOST_AUTO_RETRY;
DWC3_WRITE(sc, DWC3_GUCTL, reg);
}
#ifdef FDT
static void
snps_dwc3_configure_phy(struct snps_dwc3_softc *sc, phandle_t node)
{
char *phy_type;
uint32_t reg;
int nphy_types;
phy_type = NULL;
nphy_types = OF_getprop_alloc(node, "phy_type", (void **)&phy_type);
if (nphy_types <= 0)
return;
reg = DWC3_READ(sc, DWC3_GUSB2PHYCFG0);
if (strncmp(phy_type, "utmi_wide", 9) == 0) {
reg &= ~(DWC3_GUSB2PHYCFG0_PHYIF | DWC3_GUSB2PHYCFG0_USBTRDTIM(0xf));
reg |= DWC3_GUSB2PHYCFG0_PHYIF |
DWC3_GUSB2PHYCFG0_USBTRDTIM(DWC3_GUSB2PHYCFG0_USBTRDTIM_16BITS);
} else {
reg &= ~(DWC3_GUSB2PHYCFG0_PHYIF | DWC3_GUSB2PHYCFG0_USBTRDTIM(0xf));
reg |= DWC3_GUSB2PHYCFG0_PHYIF |
DWC3_GUSB2PHYCFG0_USBTRDTIM(DWC3_GUSB2PHYCFG0_USBTRDTIM_8BITS);
}
DWC3_WRITE(sc, DWC3_GUSB2PHYCFG0, reg);
OF_prop_free(phy_type);
}
#endif
static void
snps_dwc3_do_quirks(struct snps_dwc3_softc *sc)
{
struct xhci_softc *xsc;
uint32_t ghwp0, reg;
ghwp0 = DWC3_READ(sc, DWC3_GHWPARAMS0);
reg = DWC3_READ(sc, DWC3_GUSB2PHYCFG0);
if (device_has_property(sc->dev, "snps,dis-u2-freeclk-exists-quirk"))
reg &= ~DWC3_GUSB2PHYCFG0_U2_FREECLK_EXISTS;
else
reg |= DWC3_GUSB2PHYCFG0_U2_FREECLK_EXISTS;
if (device_has_property(sc->dev, "snps,dis_u2_susphy_quirk"))
reg &= ~DWC3_GUSB2PHYCFG0_SUSPENDUSB20;
else if ((ghwp0 & DWC3_GHWPARAMS0_MODE_MASK) ==
DWC3_GHWPARAMS0_MODE_DUALROLEDEVICE)
reg |= DWC3_GUSB2PHYCFG0_SUSPENDUSB20;
if (device_has_property(sc->dev, "snps,dis_enblslpm_quirk"))
reg &= ~DWC3_GUSB2PHYCFG0_ENBLSLPM;
else
reg |= DWC3_GUSB2PHYCFG0_ENBLSLPM;
DWC3_WRITE(sc, DWC3_GUSB2PHYCFG0, reg);
reg = DWC3_READ(sc, DWC3_GUCTL1);
if (device_has_property(sc->dev, "snps,dis-tx-ipgap-linecheck-quirk"))
reg |= DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS;
DWC3_WRITE(sc, DWC3_GUCTL1, reg);
reg = DWC3_READ(sc, DWC3_GUSB3PIPECTL0);
if (device_has_property(sc->dev, "snps,dis-del-phy-power-chg-quirk"))
reg &= ~DWC3_GUSB3PIPECTL0_DELAYP1TRANS;
if (device_has_property(sc->dev, "snps,dis_rxdet_inp3_quirk"))
reg |= DWC3_GUSB3PIPECTL0_DISRXDETINP3;
if (device_has_property(sc->dev, "snps,dis_u3_susphy_quirk"))
reg &= ~DWC3_GUSB3PIPECTL0_SUSPENDUSB3;
else if ((ghwp0 & DWC3_GHWPARAMS0_MODE_MASK) ==
DWC3_GHWPARAMS0_MODE_DUALROLEDEVICE)
reg |= DWC3_GUSB3PIPECTL0_SUSPENDUSB3;
DWC3_WRITE(sc, DWC3_GUSB3PIPECTL0, reg);
/* Port Disable does not work on <= 3.00a. Disable PORT_PED. */
if ((sc->snpsid & 0xffff) <= 0x300a) {
xsc = &sc->sc;
xsc->sc_quirks |= XHCI_QUIRK_DISABLE_PORT_PED;
}
}
static int
snps_dwc3_probe_common(device_t dev)
{
char dr_mode[16] = { 0 };
ssize_t s;
s = device_get_property(dev, "dr_mode", dr_mode, sizeof(dr_mode),
DEVICE_PROP_BUFFER);
if (s == -1) {
device_printf(dev, "Cannot determine dr_mode\n");
return (ENXIO);
}
if (strcmp(dr_mode, "host") != 0) {
device_printf(dev,
"Found dr_mode '%s' but only 'host' supported. s=%zd\n",
dr_mode, s);
return (ENXIO);
}
device_set_desc(dev, "Synopsys Designware DWC3");
return (BUS_PROBE_DEFAULT);
}
static int
snps_dwc3_common_attach(device_t dev, bool is_fdt)
{
struct snps_dwc3_softc *sc;
#ifdef FDT
phandle_t node;
phy_t usb2_phy, usb3_phy;
uint32_t reg;
#endif
int error, rid;
sc = device_get_softc(dev);
sc->dev = dev;
rid = 0;
sc->mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
RF_ACTIVE);
if (sc->mem_res == NULL) {
device_printf(dev, "Failed to map memory\n");
return (ENXIO);
}
sc->bst = rman_get_bustag(sc->mem_res);
sc->bsh = rman_get_bushandle(sc->mem_res);
sc->snpsid = DWC3_READ(sc, DWC3_GSNPSID);
sc->snpsversion = DWC3_VERSION(sc->snpsid);
sc->snpsrevision = DWC3_REVISION(sc->snpsid);
if (sc->snpsversion == DWC3_1_IP_ID ||
sc->snpsversion == DWC3_2_IP_ID) {
sc->snpsrevision = DWC3_READ(sc, DWC3_1_VER_NUMBER);
sc->snpsversion_type = DWC3_READ(sc, DWC3_1_VER_TYPE);
}
if (bootverbose) {
switch (sc->snpsversion) {
case DWC3_IP_ID:
device_printf(sc->dev, "SNPS Version: DWC3 (%x %x)\n",
sc->snpsversion, sc->snpsrevision);
break;
case DWC3_1_IP_ID:
device_printf(sc->dev, "SNPS Version: DWC3.1 (%x %x %x)\n",
sc->snpsversion, sc->snpsrevision,
sc->snpsversion_type);
break;
case DWC3_2_IP_ID:
device_printf(sc->dev, "SNPS Version: DWC3.2 (%x %x %x)\n",
sc->snpsversion, sc->snpsrevision,
sc->snpsversion_type);
break;
}
}
#ifdef DWC3_DEBUG
snps_dwc3_dump_ctrlparams(sc);
#endif
#ifdef FDT
if (!is_fdt)
goto skip_phys;
node = ofw_bus_get_node(dev);
/* Get the clocks if any */
if (ofw_bus_is_compatible(dev, "rockchip,rk3328-dwc3") == 1 ||
ofw_bus_is_compatible(dev, "rockchip,rk3568-dwc3") == 1) {
if (clk_get_by_ofw_name(dev, node, "ref_clk", &sc->clk_ref) != 0)
device_printf(dev, "Cannot get ref_clk\n");
if (clk_get_by_ofw_name(dev, node, "suspend_clk", &sc->clk_suspend) != 0)
device_printf(dev, "Cannot get suspend_clk\n");
if (clk_get_by_ofw_name(dev, node, "bus_clk", &sc->clk_bus) != 0)
device_printf(dev, "Cannot get bus_clk\n");
}
if (sc->clk_ref != NULL) {
if (clk_enable(sc->clk_ref) != 0)
device_printf(dev, "Cannot enable ref_clk\n");
}
if (sc->clk_suspend != NULL) {
if (clk_enable(sc->clk_suspend) != 0)
device_printf(dev, "Cannot enable suspend_clk\n");
}
if (sc->clk_bus != NULL) {
if (clk_enable(sc->clk_bus) != 0)
device_printf(dev, "Cannot enable bus_clk\n");
}
/* Get the phys */
usb2_phy = usb3_phy = NULL;
error = phy_get_by_ofw_name(dev, node, "usb2-phy", &usb2_phy);
if (error == 0 && usb2_phy != NULL)
phy_enable(usb2_phy);
error = phy_get_by_ofw_name(dev, node, "usb3-phy", &usb3_phy);
if (error == 0 && usb3_phy != NULL)
phy_enable(usb3_phy);
if (sc->snpsversion == DWC3_IP_ID) {
if (sc->snpsrevision >= 0x290A) {
uint32_t hwparams3;
hwparams3 = DWC3_READ(sc, DWC3_GHWPARAMS3);
if (DWC3_HWPARAMS3_SSPHY(hwparams3) == DWC3_HWPARAMS3_SSPHY_DISABLE) {
reg = DWC3_READ(sc, DWC3_GUCTL1);
if (bootverbose)
device_printf(dev, "Forcing USB2 clock only\n");
reg |= DWC3_GUCTL1_DEV_FORCE_20_CLK_FOR_30_CLK;
DWC3_WRITE(sc, DWC3_GUCTL1, reg);
}
}
}
snps_dwc3_configure_phy(sc, node);
skip_phys:
#endif
snps_dwc3_reset(sc);
snps_dwc3_configure_host(sc);
snps_dwc3_do_quirks(sc);
#ifdef DWC3_DEBUG
snsp_dwc3_dump_regs(sc, "Pre XHCI init");
#endif
error = snps_dwc3_attach_xhci(dev);
#ifdef DWC3_DEBUG
snsp_dwc3_dump_regs(sc, "Post XHCI init");
#endif
#ifdef FDT
if (error) {
if (sc->clk_ref != NULL)
clk_disable(sc->clk_ref);
if (sc->clk_suspend != NULL)
clk_disable(sc->clk_suspend);
if (sc->clk_bus != NULL)
clk_disable(sc->clk_bus);
}
#endif
return (error);
}
#ifdef FDT
static struct ofw_compat_data compat_data[] = {
{ "snps,dwc3", 1 },
{ NULL, 0 }
};
static int
snps_dwc3_fdt_probe(device_t dev)
{
if (!ofw_bus_status_okay(dev))
return (ENXIO);
if (ofw_bus_search_compatible(dev, compat_data)->ocd_data == 0)
return (ENXIO);
return (snps_dwc3_probe_common(dev));
}
static int
snps_dwc3_fdt_attach(device_t dev)
{
return (snps_dwc3_common_attach(dev, true));
}
static device_method_t snps_dwc3_fdt_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, snps_dwc3_fdt_probe),
DEVMETHOD(device_attach, snps_dwc3_fdt_attach),
DEVMETHOD_END
};
DEFINE_CLASS_1(snps_dwc3_fdt, snps_dwc3_fdt_driver, snps_dwc3_fdt_methods,
sizeof(struct snps_dwc3_softc), generic_xhci_driver);
DRIVER_MODULE(snps_dwc3_fdt, simplebus, snps_dwc3_fdt_driver, 0, 0);
MODULE_DEPEND(snps_dwc3_fdt, xhci, 1, 1, 1);
#endif
#ifdef DEV_ACPI
static char *dwc3_acpi_ids[] = {
"808622B7", /* This was an Intel PCI Vendor/Device ID used. */
"PNP0D10", /* The generic XHCI PNP ID needing extra probe checks. */
NULL
};
static int
snps_dwc3_acpi_probe(device_t dev)
{
char *match;
int error;
if (acpi_disabled("snps_dwc3"))
return (ENXIO);
error = ACPI_ID_PROBE(device_get_parent(dev), dev, dwc3_acpi_ids, &match);
if (error > 0)
return (ENXIO);
/*
* If we found the Generic XHCI PNP ID we can only attach if we have
* some other means to identify the device as dwc3.
*/
if (strcmp(match, "PNP0D10") == 0) {
/* This is needed in SolidRun's HoneyComb. */
if (device_has_property(dev, "snps,dis_rxdet_inp3_quirk"))
goto is_dwc3;
return (ENXIO);
}
is_dwc3:
return (snps_dwc3_probe_common(dev));
}
static int
snps_dwc3_acpi_attach(device_t dev)
{
return (snps_dwc3_common_attach(dev, false));
}
static device_method_t snps_dwc3_acpi_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, snps_dwc3_acpi_probe),
DEVMETHOD(device_attach, snps_dwc3_acpi_attach),
DEVMETHOD_END
};
DEFINE_CLASS_1(snps_dwc3_acpi, snps_dwc3_acpi_driver, snps_dwc3_acpi_methods,
sizeof(struct snps_dwc3_softc), generic_xhci_driver);
DRIVER_MODULE(snps_dwc3_acpi, acpi, snps_dwc3_acpi_driver, 0, 0);
MODULE_DEPEND(snps_dwc3_acpi, usb, 1, 1, 1);
#endif