This was accidentally broken in commits cfa1b4a711/5e8e794e3b.
It saves a line or so to call ftello unconditionally in _CloseArchive,
but we have to expect that it might fail if we're not in hasSeek mode.
Per report from Bernd Helmle.
In passing, improve _getFilePos to print an appropriate message if
ftello fails unexpectedly, rather than just a vague complaint about
"ftell mismatch".
It's easy to forget using SYSTEMQUOTEs when constructing command strings
for system() or popen(). Even if we fix all the places missing it now, it is
bound to be forgotten again in the future. Introduce wrapper functions that
do the the extra quoting for you, and get rid of SYSTEMQUOTEs in all the
callers.
We previosly used SYSTEMQUOTEs in all the hard-coded command strings, and
this doesn't change the behavior of those. But user-supplied commands, like
archive_command, restore_command, COPY TO/FROM PROGRAM calls, as well as
pgbench's \shell, will now gain an extra pair of quotes. That is desirable,
but if you have existing scripts or config files that include an extra
pair of quotes, those might need to be adjusted.
Reviewed by Amit Kapila and Tom Lane
Before 9.4, such an aggregate couldn't be declared, because its final
function would have to have polymorphic result type but no polymorphic
argument, which CREATE FUNCTION would quite properly reject. The
ordered-set-aggregate patch found a workaround: allow the final function
to be declared as accepting additional dummy arguments that have types
matching the aggregate's regular input arguments. However, we failed
to notice that this problem applies just as much to regular aggregates,
despite the fact that we had a built-in regular aggregate array_agg()
that was known to be undeclarable in SQL because its final function
had an illegal signature. So what we should have done, and what this
patch does, is to decouple the extra-dummy-arguments behavior from
ordered-set aggregates and make it generally available for all aggregate
declarations. We have to put this into 9.4 rather than waiting till
later because it slightly alters the rules for declaring ordered-set
aggregates.
The patch turned out a bit bigger than I'd hoped because it proved
necessary to record the extra-arguments option in a new pg_aggregate
column. I'd thought we could just look at the final function's pronargs
at runtime, but that didn't work well for variadic final functions.
It's probably just as well though, because it simplifies life for pg_dump
to record the option explicitly.
While at it, fix array_agg() to have a valid final-function signature,
and add an opr_sanity test to notice future deviations from polymorphic
consistency. I also marked the percentile_cont() aggregates as not
needing extra arguments, since they don't.
According to the Single Unix Spec and assorted man pages, you're supposed
to use the constants named AF_xxx when setting ai_family for a getaddrinfo
call. In a few places we were using PF_xxx instead. Use of PF_xxx
appears to be an ancient BSD convention that was not adopted by later
standardization. On BSD and most later Unixen, it doesn't matter much
because those constants have equivalent values anyway; but nonetheless
this code is not per spec.
In the same vein, replace PF_INET by AF_INET in one socket() call, which
wasn't even consistent with the other socket() call in the same function
let alone the remainder of our code.
Per investigation of a Cygwin trouble report from Marco Atzeri. It's
probably a long shot that this will fix his issue, but it's wrong in
any case.
Until now, when executing an aggregate function as a window function
within a window with moving frame start (that is, any frame start mode
except UNBOUNDED PRECEDING), we had to recalculate the aggregate from
scratch each time the frame head moved. This patch allows an aggregate
definition to include an alternate "moving aggregate" implementation
that includes an inverse transition function for removing rows from
the aggregate's running state. As long as this can be done successfully,
runtime is proportional to the total number of input rows, rather than
to the number of input rows times the average frame length.
This commit includes the core infrastructure, documentation, and regression
tests using user-defined aggregates. Follow-on commits will update some
of the built-in aggregates to use this feature.
David Rowley and Florian Pflug, reviewed by Dean Rasheed; additional
hacking by me
It is possible for a view or materialized view to depend on a table's
primary key, if the view query relies on functional dependency to
abbreviate a GROUP BY list. This is problematic for pg_dump since we
ordinarily want to dump view definitions in the pre-data section but
indexes in post-data. pg_dump knows how to deal with this situation for
regular views, by breaking the view's ON SELECT rule apart from the view
proper. But it had not been taught what to do about materialized views,
and in fact mistakenly dumped them as regular views in such cases, as
seen in bug #9616 from Jesse Denardo.
If we had CREATE OR REPLACE MATERIALIZED VIEW, we could fix this in a
manner analogous to what's done for regular views; but we don't yet,
and we'd not back-patch such a thing into 9.3 anyway. As a hopefully-
temporary workaround, break the circularity by postponing the matview
into post-data altogether when this case occurs.
Clear errno before calling readdir() and handle old MinGW errno bug
while adding full test coverage for readdir/closedir failures.
Backpatch through 8.4.
This option makes pg_dump, pg_dumpall and pg_restore inject an IF EXISTS
clause to each DROP command they emit. (In pg_dumpall, the clause is
not added to individual objects drops, but rather to the CREATE DATABASE
commands, as well as CREATE ROLE and CREATE TABLESPACE.)
This allows for a better user dump experience when using --clean in case
some objects do not already exist. Per bug #7873 by Dave Rolsky.
Author: Pavel Stěhule
Reviewed-by: Jeevan Chalke, Álvaro Herrera, Josh Kupershmidt
A number of issues were identified by the Coverity scanner and are
addressed in this patch. None of these appear to be security issues
and many are mostly cosmetic changes.
Short comments for each of the changes follows.
Correct the semi-colon placement in be-secure.c regarding SSL retries.
Remove a useless comparison-to-NULL in proc.c (value is dereferenced
prior to this check and therefore can't be NULL).
Add checking of chmod() return values to initdb.
Fix a couple minor memory leaks in initdb.
Fix memory leak in pg_ctl- involves free'ing the config file contents.
Use an int to capture fgetc() return instead of an enum in pg_dump.
Fix minor memory leaks in pg_dump.
(note minor change to convertOperatorReference()'s API)
Check fclose()/remove() return codes in psql.
Check fstat(), find_my_exec() return codes in psql.
Various ECPG memory leak fixes.
Check find_my_exec() return in ECPG.
Explicitly ignore pqFlush return in libpq error-path.
Change PQfnumber() to avoid doing an strdup() when no changes required.
Remove a few useless check-against-NULL's (value deref'd beforehand).
Check rmtree(), malloc() results in pg_regress.
Also check get_alternative_expectfile() return in pg_regress.
We used to have externs for getopt() and its API variables scattered
all over the place. Now that we find we're going to need to tweak the
variable declarations for Cygwin, it seems like a good idea to have
just one place to tweak.
In this commit, the variables are declared "#ifndef HAVE_GETOPT_H".
That may or may not work everywhere, but we'll soon find out.
Andres Freund
Make ftello error-checking consistent to all calls and remove a
bit of ftello-related code which has been #if 0'd out since 2001.
Note that we are not concerned with the ftello() call under
snprintf() failing as it is just building a string to call
exit_horribly() with; printing -1 in such a case is fine.
Rather than reset errno (or just hope that its cleared already),
check just the result of the ftello for < 0 to determine if there
was an issue.
Oversight by me, pointed out by Tom.
Improve pg_dump by checking results on various fgetc() calls which
previously were unchecked, ditto for ftello. Also clean up a couple
of very minor memory leaks by waiting to allocate structures until
after the initial check(s).
Issues spotted by Coverity.
Move allocation to after we check the remote server version, to avoid
a possible, very minor, memory leak. This makes us more consistent
throughout as most places in pg_dump are done in the same way (due, in
part, to previous fixes like this).
Spotted by the Coverity scanner.
During parallel pg_dump, a worker process closing the connection caused
a minor memory leak (particularly minor as we are likely about to exit
anyway). Instead, free the memory in this case prior to returning NULL
to indicate connection closed.
Spotting by the Coverity scanner.
Back patch to 9.3 where this was introduced.
CREATE EVENT TRIGGER forgot to mark the event trigger as a member of its
extension, and pg_dump didn't pay any attention anyway when deciding
whether to dump the event trigger. Per report from Moshe Jacobson.
Given the obvious lack of testing here, it's rather astonishing that
ALTER EXTENSION ADD/DROP EVENT TRIGGER work, but they seem to.
There was an apparent attempt to limit the target database for
pg_restore to version 7.1.0 or later. Due to a leading zero this
was interpreted as an octal number, which allowed targets with
version numbers down to 2.87.36. The lowest actual release above
that was 6.0.0, so that was effectively the limit.
Since the success of the restore attempt will depend primarily on
on what statements were generated by the dump run, we don't want
pg_restore trying to guess whether a given target should be allowed
based on version number. Allow a connection to any version. Since
it is very unlikely that anyone would be using a recent version of
pg_restore to restore to a pre-6.0 database, this has little to no
practical impact, but it makes the code less confusing to read.
Issue reported and initial patch suggestion from Joel Jacobson
based on an article by Andrey Karpov reporting on issues found by
PVS-Studio static code analyzer. Final patch based on analysis by
Tom Lane. Back-patch to all supported branches.
This patch introduces generic support for ordered-set and hypothetical-set
aggregate functions, as well as implementations of the instances defined in
SQL:2008 (percentile_cont(), percentile_disc(), rank(), dense_rank(),
percent_rank(), cume_dist()). We also added mode() though it is not in the
spec, as well as versions of percentile_cont() and percentile_disc() that
can compute multiple percentile values in one pass over the data.
Unlike the original submission, this patch puts full control of the sorting
process in the hands of the aggregate's support functions. To allow the
support functions to find out how they're supposed to sort, a new API
function AggGetAggref() is added to nodeAgg.c. This allows retrieval of
the aggregate call's Aggref node, which may have other uses beyond the
immediate need. There is also support for ordered-set aggregates to
install cleanup callback functions, so that they can be sure that
infrastructure such as tuplesort objects gets cleaned up.
In passing, make some fixes in the recently-added support for variadic
aggregates, and make some editorial adjustments in the recent FILTER
additions for aggregates. Also, simplify use of IsBinaryCoercible() by
allowing it to succeed whenever the target type is ANY or ANYELEMENT.
It was inconsistent that it dealt with other polymorphic target types
but not these.
Atri Sharma and Andrew Gierth; reviewed by Pavel Stehule and Vik Fearing,
and rather heavily editorialized upon by Tom Lane
pg_dumpall's charter is to be able to recreate a database cluster's
contents in a virgin installation, but it was failing to honor that
contract if the cluster had any ALTER DATABASE SET
default_transaction_read_only settings. By including a SET command
for the connection for each connection opened by pg_dumpall output,
errors are avoided and the source cluster is successfully
recreated.
There was discussion of whether to also set this for the connection
applying pg_dump output, but it was felt that it was both less
appropriate in that context, and far easier to work around.
Backpatch to all supported branches.
Formerly the planner had a hard-wired rule of thumb for guessing the amount
of space consumed by an aggregate function's transition state data. This
estimate is critical to deciding whether it's OK to use hash aggregation,
and in many situations the built-in estimate isn't very good. This patch
adds a column to pg_aggregate wherein a per-aggregate estimate can be
provided, overriding the planner's default, and infrastructure for setting
the column via CREATE AGGREGATE.
It may be that additional smarts will be required in future, perhaps even
a per-aggregate estimation function. But this is already a step forward.
This is extracted from a larger patch to improve the performance of numeric
and int8 aggregates. I (tgl) thought it was worth reviewing and committing
this infrastructure separately. In this commit, all built-in aggregates
are given aggtransspace = 0, so no behavior should change.
Hadi Moshayedi, reviewed by Pavel Stehule and Tomas Vondra
In --inserts and especially --column-inserts mode, we can get a useful
speedup by generating the common prefix of all a table's INSERT commands
just once, and then printing the prebuilt string for each row. This avoids
multiple invocations of fmtId() and other minor fooling around.
David Rowley
Pending patches for logical replication will use this to determine
which columns of a tuple ought to be considered as its candidate key.
Andres Freund, with minor, mostly cosmetic adjustments by me
When we are using a C99-compliant vsnprintf implementation (which should be
most places, these days) it is worth the trouble to make use of its report
of how large the buffer needs to be to succeed. This patch adjusts
stringinfo.c and some miscellaneous usages in pg_dump to do that, relying
on the logic recently added in libpgcommon's psprintf.c. Since these
places want to know the number of bytes written once we succeed, modify the
API of pvsnprintf() to report that.
There remains near-duplicate logic in pqexpbuffer.c, but since that code
is in libpq, psprintf.c's approach of exit()-on-error isn't appropriate
for use there. Also note that I didn't bother touching the multitude
of places that call (v)snprintf without any attempt to provide a resizable
buffer.
Release-note-worthy incompatibility: the API of appendStringInfoVA()
changed. If there's any third-party code that's calling that directly,
it will need tweaking along the same lines as in this patch.
David Rowley and Tom Lane
Continuing 63f32f3416, libpgcommon should
depend on libpgport, but not vice versa. But wait_result_to_str() in
wait_error.c depends on pstrdup() in libpgcommon. So move exec.c and
wait_error.c from libpgport to libpgcommon. Also switch the link order
in the place that's actually used by the failing ecpg builds.
The function declarations have been left in port.h for now. That should
perhaps be separated sometime.
Add asprintf(), pg_asprintf(), and psprintf() to simplify string
allocation and composition. Replacement implementations taken from
NetBSD.
Reviewed-by: Álvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Asif Naeem <anaeem.it@gmail.com>
There's no inherent reason why an aggregate function can't be variadic
(even VARIADIC ANY) if its transition function can handle the case.
Indeed, this patch to add the feature touches none of the planner or
executor, and little of the parser; the main missing stuff was DDL and
pg_dump support.
It is true that variadic aggregates can create the same sort of ambiguity
about parameters versus ORDER BY keys that was complained of when we
(briefly) had both one- and two-argument forms of string_agg(). However,
the policy formed in response to that discussion only said that we'd not
create any built-in aggregates with varying numbers of arguments, not that
we shouldn't allow users to do it. So the logical extension of that is
we can allow users to make variadic aggregates as long as we're wary about
shipping any such in core.
In passing, this patch allows aggregate function arguments to be named, to
the extent of remembering the names in pg_proc and dumping them in pg_dump.
You can't yet call an aggregate using named-parameter notation. That seems
like a likely future extension, but it'll take some work, and it's not what
this patch is really about. Likewise, there's still some work needed to
make window functions handle VARIADIC fully, but I left that for another
day.
initdb forced because of new aggvariadic field in Aggref parse nodes.
We already did this for -t (--table) in 9.3, but missed the other similar
options. For consistency, allow all of them to be specified multiple times.
Unfortunately it's too late to sneak this into 9.3, so commit to master
only.
