This changes zic's default output format from "-b fat" to "-b slim".
We were already using "slim" in v13/HEAD, so those branches drop
the explicit -b switch in the Makefiles. Instead, add an explicit
"-b fat" in v12 and before, so that we don't change the output file
format in those branches. (This is perhaps excessively conservative,
but we decided not to do so in a12079109, and I'll stick with that.)
Other non-cosmetic changes are to drop support for zic's long-obsolete
"-y" switch, and to ensure that strftime() does not change errno
unless it fails.
As usual with tzcode changes, back-patch to all supported branches.
Commit 7be5d8df1f surfaced the logic
error, which had no functional implications, by adding "use warnings".
The buildfarm always customizes PROVE_FLAGS, so the warning did not
appear there. Back-patch to 9.5 (all supported versions).
When installing binaries and libraries using the MSVC installation
routines, the operation gets done after moving to the root folder, whose
location is detected by checking if "configure" exists two times in a
row. So, calling the installation script from src/tools/msvc/ with an
extra "configure" file four levels up the root path of the code tree
causes the execution to go further up, leading to a failure in finding
the builds. This commit fixes the issue by moving to the root folder of
the code tree only once, when necessary.
Author: Arnold Müller
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/16343-f638f67e7e52b86c@postgresql.org
Backpatch-through: 9.5
Attempting to use an installation path of Python that includes spaces
caused the MSVC builds to fail. This fixes the issue by using the same
quoting method as ad7595b for OpenSSL.
Author: Victor Wagner
Discussion: https://postgr.es/m/20200430150608.6dc6b8c4@antares.wagner.home
Backpatch-through: 9.5
Sticking this comment at the end of the last line was a bad idea: it's
not particularly readable, and it tempts pgindent to mess with line
breaks within the comment, which in turn reveals that win32tzlist.pl's
clean_displayname() does the wrong thing to clean up such line breaks.
While that's not hard to fix, there's basically no excuse for this
arrangement to begin with, especially since it makes the table layout
needlessly vary across back branches with different pgindent rules.
Let's just put the comment inside the braces, instead.
This commit just moves and reformats the comments, and updates
win32tzlist.pl to match; there's no actual data change.
Per odd-looking results from Juan José Santamaría Flecha.
Back-patch, since the point is to make win32_tzmap[] look the
same in all supported branches again.
Discussion: https://postgr.es/m/5752.1587740484@sss.pgh.pa.us
Apparently in some language versions of Visual Studio nmake outputs some
material after the version number and before the end of the line. This
has been seen in Chinese versions. Therefore, we no longer demand that
the version string comes at the end of a line.
Per complaint from Cuiping Lin.
Backpatch to all live branches.
This omits 007_sync_rep.pl, which tests a feature new in 9.6. The only
other change is to substitute "hot_standby" for "replica". A planned
back-patch will use this suite to test its recovery behavior changes.
Identified by Kyotaro Horiguchi, though I did not use his patch.
Discussion: https://postgr.es/m/20200304.162919.898938381201316571.horikyota.ntt@gmail.com
First, make sure that the .exe name is quoted when trying to get the
version number. Also, don't quote the lib name for using in the project
files if it's already been quoted. This second change applies to all
libraries, not just OpenSSL.
This has clearly been broken forever, so backpatch to all live branches.
This commit improves subject in two ways:
* It removes ugliness of 02f90879e7, which stores distance values and null
flags in two separate arrays after GISTSearchItem struct. Instead we pack
both distance value and null flag in IndexOrderByDistance struct. Alignment
overhead should be negligible, because we typically deal with at most few
"col op const" expressions in ORDER BY clause.
* It fixes handling of "col op NULL" expression in KNN-SP-GiST. Now, these
expression are not passed to support functions, which can't deal with them.
Instead, NULL result is implicitly assumed. It future we may decide to
teach support functions to deal with NULL arguments, but current solution is
bugfix suitable for backpatch.
Reported-by: Nikita Glukhov
Discussion: https://postgr.es/m/826f57ee-afc7-8977-c44c-6111d18b02ec%40postgrespro.ru
Author: Nikita Glukhov
Reviewed-by: Alexander Korotkov
Backpatch-through: 9.4
Depending on the system used, t/*.pl may not be expanded into a list of
tests which can be consumed by prove when attempting to run TAP tests on
a given path. Fix that by using glob() directly in the script, to make
sure that a complete list of tests is provided. This has not proved to
be an issue with MSVC as the list was properly expanded, but it is on
Linux with perl's system().
This is extracted from a larger patch.
Author: Tom Lane
Discussion: https://postgr.es/m/6628.1567958876@sss.pgh.pa.us
Backpatch-through: 9.4
Up to now, the MSVC build scripts are able to support only one fixed
version of OpenSSL, and they lacked logic to detect the version of
OpenSSL a given compilation of Postgres is linking to (currently 1.0.2,
the latest LTS of upstream which will be EOL'd at the end of 2019).
This commit adds more logic to detect the version of OpenSSL used by a
build and makes use of it to add support for compilation with OpenSSL
1.1.0 which requires a new set of compilation flags to work properly.
The supported OpenSSL installers have changed their library layer with
various library renames with the upgrade to 1.1.0, making the logic a
bit more complicated. The scripts are now able to adapt to the new
world order.
Reported-by: Sergey Pashkov
Author: Juan José Santamaría Flecha, Michael Paquier
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/15789-8fc75dea3c5a17c8@postgresql.org
Backpatch-through: 9.4
My back-patch of commit 10b72deafe added
calls to File::Path::rmtree(), but v10 and older had not been importing
that symbol. Back-patch to v10, 9.6 and 9.5.
When this suite runs installcheck, redirect file creations from
src/test/regress to src/bin/pg_upgrade/tmp_check/regress. This closes a
race condition in "make -j check-world". If the pg_upgrade suite wrote
to a given src/test/regress/results file in parallel with the regular
src/test/regress invocation writing it, a test failed spuriously. Even
without parallelism, in "make -k check-world", the suite finishing
second overwrote the other's regression.diffs. This revealed test
"largeobject" assuming @abs_builddir@ is getcwd(), so fix that, too.
Buildfarm client REL_10, released fifty-four days ago, supports saving
regression.diffs from its new location. When an older client reports a
pg_upgradeCheck failure, it will no longer include regression.diffs.
Back-patch to 9.5, where pg_upgrade moved to src/bin.
Reviewed (in earlier versions) by Andrew Dunstan.
Discussion: https://postgr.es/m/20181224034411.GA3224776@rfd.leadboat.com
This allows "vcregress upgradecheck" to pass twice in immediate
succession, and it's more like how $(prove_check) works. Back-patch to
9.5, where pg_upgrade moved to src/bin.
Discussion: https://postgr.es/m/20190520012436.GA1480421@rfd.leadboat.com
When this suite runs installcheck, redirect file creations from
src/test/regress to src/bin/pg_upgrade/tmp_check/regress. This closes a
race condition in "make -j check-world". If the pg_upgrade suite wrote
to a given src/test/regress/results file in parallel with the regular
src/test/regress invocation writing it, a test failed spuriously. Even
without parallelism, in "make -k check-world", the suite finishing
second overwrote the other's regression.diffs. This revealed test
"largeobject" assuming @abs_builddir@ is getcwd(), so fix that, too.
Buildfarm client REL_10, released forty-five days ago, supports saving
regression.diffs from its new location. When an older client reports a
pg_upgradeCheck failure, it will no longer include regression.diffs.
Back-patch to 9.5, where pg_upgrade moved to src/bin.
Reviewed by Andrew Dunstan.
Discussion: https://postgr.es/m/20181224034411.GA3224776@rfd.leadboat.com
Commit f83419b739 failed to notice that mkvcbuild.pl and build.pl use
different searchpath and do-file logic, breaking the latter, so it is
adjusted to use the same logic as mkvcbuild.pl.
Contrary to the comment on 772d4b76, only paths starting with "./" or
"../" are considered relative to the current working directory by perl's
"do" function. So this patch converts all the relevant cases to use "./"
paths. This only affects MSVC.
Backpatch to all live branches.
Use "do" instead of "require" for included files, as it doesn't look for
them in the search path but relative to the current working directory.
These changes have already been made to REL_10_STABLE and later, to
satisfy the demands of perlcritic, but need backporting now to earlier
branches.
wcsrtombs (called through wchar2char from common functions like lower,
upper, etc.) uses various optimizations that may look like access to
uninitialized data, triggering valgrind reports.
For example AVX2 instructions load data in 256-bit chunks, and gconv
does something similar with 32-bit chunks. This is faster than accessing
the bytes one by one, and the uninitialized part of the buffer is not
actually used. So suppress the bogus reports.
The exact stack depends on possible optimizations - it might be AVX, SSE
(as in the report by Aleksander Alekseev) or something else. Hence the
last frame is wildcarded, to deal with this.
Backpatch all the way back to 9.4.
Author: Tomas Vondra
Discussion: https://www.postgresql.org/message-id/flat/90ac0452-e907-e7a4-b3c8-15bd33780e62%402ndquadrant.com
Discussion: https://www.postgresql.org/message-id/20180220150838.GD18315@e733.localdomain
Modern versions of perl no longer include the current directory in the
perl searchpath, as it's insecure. Instead of adding the current
directory, we get around the problem by adding the directory where the
script lives.
Problem noted by Victor Wagner.
Solution adapted from buildfarm client code.
Backpatch to all live versions.
This should have been done some years ago as promised in commit
c4dcdd0c2. However, better late than never.
Along the way do a little housekeeping, including using a simpler test
for the python version being tested, and removing a redundant subroutine
parameter. These changes only apply back to release 9.5.
Backpatch to all live releases.
Although configure-based builds correctly define HAVE_LONG_LONG_INT when
appropriate (in both pg_config.h and ecpg_config.h), builds using the MSVC
scripts failed to do so. This currently has no impact on the backend,
since it uses that symbol nowhere; but it does prevent ecpg from
supporting "long long int". Fix that.
Also, adjust Solution.pm so that in the constructed ecpg_config.h file,
the "#if (_MSC_VER > 1200)" covers only the LONG_LONG_INT-related
#defines, not the whole file. AFAICS this was a thinko on somebody's
part: ENABLE_THREAD_SAFETY should always be defined in Windows builds,
and in branches using USE_INTEGER_DATETIMES, the setting of that shouldn't
depend on the compiler version either. If I'm wrong, I imagine the
buildfarm will say so.
Per bug #15080 from Jonathan Allen; issue diagnosed by Michael Meskes
and Andrew Gierth. Back-patch to all supported branches.
Discussion: https://postgr.es/m/151935568942.1461.14623890240535309745@wrigleys.postgresql.org
This makes the client programs behave as documented regardless of the
connect-time search_path and regardless of user-created objects. Today,
a malicious user with CREATE permission on a search_path schema can take
control of certain of these clients' queries and invoke arbitrary SQL
functions under the client identity, often a superuser. This is
exploitable in the default configuration, where all users have CREATE
privilege on schema "public".
This changes behavior of user-defined code stored in the database, like
pg_index.indexprs and pg_extension_config_dump(). If they reach code
bearing unqualified names, "does not exist" or "no schema has been
selected to create in" errors might appear. Users may fix such errors
by schema-qualifying affected names. After upgrading, consider watching
server logs for these errors.
The --table arguments of src/bin/scripts clients have been lax; for
example, "vacuumdb -Zt pg_am\;CHECKPOINT" performed a checkpoint. That
now fails, but for now, "vacuumdb -Zt 'pg_am(amname);CHECKPOINT'" still
performs a checkpoint.
Back-patch to 9.3 (all supported versions).
Reviewed by Tom Lane, though this fix strategy was not his first choice.
Reported by Arseniy Sharoglazov.
Security: CVE-2018-1058
Commit 614350a3 allowed for an different builds of OpenSSL libraries on
Windows, but ignored the fact that the alternative builds don't have
config-specific libraries. This patch fixes the Solution file to ask for
the correct libraries.
per offline discussions with Leonardo Cecchi and Marco Nenciarini,
Backpatch to all live branches.
Notably, this permits linking to the 32-bit Perl binaries advertised on
perl.org, namely Strawberry Perl and ActivePerl. This has a side effect
of permitting linking to binaries built with obsolete MSVC versions.
By default, MSVC 2012 and later require a "safe exception handler table"
in each binary. MinGW-built, 32-bit DLLs lack the relevant exception
handler metadata, so linking to them failed with error LNK2026. Restore
the semantics of MSVC 2010, which omits the table from a given binary if
some linker input lacks metadata. This has no effect on 64-bit builds
or on MSVC 2010 and earlier. Back-patch to 9.3 (all supported
versions).
Reported by Victor Wagner.
Discussion: https://postgr.es/m/20160326154321.7754ab8f@wagner.wagner.home
Commits 5a5c2feca3 and
b5178c5d08 introduced support for modern
MSVC-built, 32-bit Perl, but they broke use of MinGW-built, 32-bit Perl
distributions like Strawberry Perl and modern ActivePerl. Perl has no
robust means to report whether it expects a -D_USE_32BIT_TIME_T ABI, so
test this. Back-patch to 9.3 (all supported versions).
The chief alternative was a heuristic of adding -D_USE_32BIT_TIME_T when
$Config{gccversion} is nonempty. That banks on every gcc-built Perl
using the same ABI. gcc could change its default ABI the way MSVC once
did, and one could build Perl with gcc and the non-default ABI.
The GNU make build system could benefit from a similar test, without
which it does not support MSVC-built Perl. For now, just add a comment.
Most users taking the special step of building Perl with MSVC probably
build PostgreSQL with MSVC.
Discussion: https://postgr.es/m/20171130041441.GA3161526@rfd.leadboat.com
This is necessary for ActivePerl 5.18 onwards and for Strawberry Perl.
It is not sufficient for 32-bit builds with newer Visual Studio; these
fail with error LINK2026. Back-patch to 9.3 (all supported versions).
Reported by Victor Wagner.
Discussion: https://postgr.es/m/20160326154321.7754ab8f@wagner.wagner.home
There have been numerous buildfarm failures but the diagnostic is
currently silent about the reason for failure to open the file. Let's
see if we can get to the bottom of it.
Backpatch to all live branches.
In commit 9d6b160d7, I tweaked pg_config.h.win32 to use
"#define HAVE_LONG_LONG_INT_64 1" rather than defining it as empty,
for consistency with what happens in an autoconf'd build.
But Solution.pm injects another definition of that macro into
ecpg_config.h, leading to justifiable (though harmless) compiler whining.
Make that one consistent too. Back-patch, like the previous patch.
Discussion: https://postgr.es/m/CAEepm=1dWsXROuSbRg8PbKLh0S=8Ou-V8sr05DxmJOF5chBxqQ@mail.gmail.com
It now emerges that we can only rely on Perl to tell us we must use
-D_USE_32BIT_TIME_T if it's Perl 5.13.4 or later. For older versions,
revert to our previous practice of assuming we need that symbol in
all 32-bit Windows builds. This is not ideal, but inquiring into
which compiler version Perl was built with seems far too fragile.
In any case, we had not previously had complaints about these old
Perl versions, so let's assume this is Good Enough. (It's still
better than the situation ante commit 5a5c2feca, in that at least
the effects are confined to PL/Perl rather than the whole PG build.)
Back-patch to all supported versions, like 5a5c2feca and predecessors.
Discussion: https://postgr.es/m/CANFyU97OVQ3+Mzfmt3MhuUm5NwPU=-FtbNH5Eb7nZL9ua8=rcA@mail.gmail.com
Commit 3c163a7fc's original choice to ignore all #define symbols whose
names begin with underscore turns out to be too simplistic. On Windows,
some Perl installations are built with -D_USE_32BIT_TIME_T, and we must
absorb that or we get the wrong result for sizeof(PerlInterpreter).
This effectively re-reverts commit ef58b87df, which injected that symbol
in a hacky way, making it apply to all of Postgres not just PL/Perl.
More significantly, it did so on *all* 32-bit Windows builds, even when
the Perl build to be used did not select this option; so that it fails
to work properly with some newer Perl builds.
By making this change, we would be introducing an ABI break in 32-bit
Windows builds; but fortunately we have not used type time_t in any
exported Postgres APIs in a long time. So it should be OK, both for
PL/Perl itself and for third-party extensions, if an extension library
is built with a different _USE_32BIT_TIME_T setting than the core code.
Patch by me, based on research by Ashutosh Sharma and Robert Haas.
Back-patch to all supported branches, as commit 3c163a7fc was.
Discussion: https://postgr.es/m/CANFyU97OVQ3+Mzfmt3MhuUm5NwPU=-FtbNH5Eb7nZL9ua8=rcA@mail.gmail.com
