We previously recognized that citext wouldn't get marked as collatable
during pg_upgrade from a pre-9.1 installation, and hacked its
create-from-unpackaged script to manually perform the necessary catalog
adjustments. However, we overlooked the fact that domains over citext,
as well as the citext[] array type, need the same adjustments. Extend
the script to handle those cases.
Also, the documentation suggested that this was only an issue in pg_upgrade
scenarios, which is quite wrong; loading any dump containing citext from a
pre-9.1 server will also result in the type being wrongly marked.
I approached the documentation problem by changing the 9.1.2 release note
paragraphs about this issue, which is historically inaccurate. But it
seems better than having the information scattered in multiple places, and
leaving incorrect info in the 9.1.2 notes would be bad anyway. We'll still
need to mention the issue again in the 9.1.4 notes, but perhaps they can
just reference 9.1.2 for fix instructions.
Per report from Evan Carroll. Back-patch into 9.1.
Commit 62c7bd31c8 had assorted problems, most
visibly that it broke PREPARE TRANSACTION in the presence of session-level
advisory locks (which should be ignored by PREPARE), as per a recent
complaint from Stephen Rees. More abstractly, the patch made the
LockMethodData.transactional flag not merely useless but outright
dangerous, because in point of fact that flag no longer tells you anything
at all about whether a lock is held transactionally. This fix therefore
removes that flag altogether. We now rely entirely on the convention
already in use in lock.c that transactional lock holds must be owned by
some ResourceOwner, while session holds are never so owned. Setting the
locallock struct's owner link to NULL thus denotes a session hold, and
there is no redundant marker for that.
PREPARE TRANSACTION now works again when there are session-level advisory
locks, and it is also able to transfer transactional advisory locks to the
prepared transaction, but for implementation reasons it throws an error if
we hold both types of lock on a single lockable object. Perhaps it will be
worth improving that someday.
Assorted other minor cleanup and documentation editing, as well.
Back-patch to 9.1, except that in the 9.1 branch I did not remove the
LockMethodData.transactional flag for fear of causing an ABI break for
any external code that might be examining those structs.
This backatches Heikki's patch in 140a4fbf1a
to make sure the documentation on the website gets updated, since
we're regularly receiving complains about this link.
It's still non-deterministic in some sense ... but given fixed settings
and identical planning problems, it will now always choose the same plan,
so we probably shouldn't tar it with that brush. Per bug #6565 from
Guillaume Cottenceau. Back-patch to 9.0 where the behavior was fixed.
Since 9.0, removing lots of large objects in a single transaction risks
exceeding max_locks_per_transaction, because we merged large object removal
into the generic object-drop mechanism, which takes out an exclusive lock
on each object to be dropped. This creates a hazard for contrib/vacuumlo,
which has historically tried to drop all unreferenced large objects in one
transaction. There doesn't seem to be any correctness requirement to do it
that way, though; we only need to drop enough large objects per transaction
to amortize the commit costs.
To prevent a regression from pre-9.0 releases wherein vacuumlo worked just
fine, back-patch commits b69f2e3640 and
64c604898e, which break vacuumlo's deletions
into multiple transactions with a user-controllable upper limit on the
number of objects dropped per transaction.
Tim Lewis, Robert Haas, Tom Lane
In backup.sgml, point out that you need to be using the logging collector
if you want to log messages from a failing archive_command script. (This
is an oversimplification, in that it will work without the collector as
long as you're not sending postmaster stderr to /dev/null; but it seems
like a good idea to encourage use of the collector to avoid problems
with multiple processes concurrently scribbling on one file.)
In config.sgml, do some wordsmithing of logging_collector discussion.
Per bug #6518 from Janning Vygen
Several places were still written as though standard_conforming_strings
didn't exist, much less be the default. Now that it is on by default,
we can simplify the text and just insert occasional notes suggesting that
you might have to think harder if it's turned off. Per discussion of a
suggestion from Hannes Frederic Sowa.
Back-patch to 9.1 where standard_conforming_strings was made the default.
This check was overlooked when we added function execute permissions to the
system years ago. For an ordinary trigger function it's not a big deal,
since trigger functions execute with the permissions of the table owner,
so they couldn't do anything the user issuing the CREATE TRIGGER couldn't
have done anyway. However, if a trigger function is SECURITY DEFINER,
that is not the case. The lack of checking would allow another user to
install it on his own table and then invoke it with, essentially, forged
input data; which the trigger function is unlikely to realize, so it might
do something undesirable, for instance insert false entries in an audit log
table.
Reported by Dinesh Kumar, patch by Robert Haas
Security: CVE-2012-0866
PGresults used to be read-only from the application's viewpoint, but now
that we've exposed various functions that allow modification of a PGresult,
that sweeping statement is no longer accurate. Noted by Dmitriy Igrishin.
The correct information appears in the text, so just remove the statement
in the table, where it did not fit nicely anyway. (Curiously, the correct
info has been there much longer than the erroneous table entry.)
Resolves problem noted by Daniele Varrazzo.
In HEAD and 9.1, also do a bit of wordsmithing on other text on the page.
We have seen one too many reports of people trying to use 9.1 extension
files in the old-fashioned way of sourcing them in psql. Not only does
that usually not work (due to failure to substitute for MODULE_PATHNAME
and/or @extschema@), but if it did work they'd get a collection of loose
objects not an extension. To prevent this, insert an \echo ... \quit
line that prints a suitable error message into each extension script file,
and teach commands/extension.c to ignore lines starting with \echo.
That should not only prevent any adverse consequences of loading a script
file the wrong way, but make it crystal clear to users that they need to
do it differently now.
Tom Lane, following an idea of Andrew Dunstan's. Back-patch into 9.1
... there is not going to be much value in this if we wait till 9.2.
The documentation neglected to explain its behavior in a script file
(it only ends execution of the script, not psql as a whole), and failed
to mention the long form \quit either.
This mode still exists for backwards compatibility, making
sslmode=require the same as sslmode=verify-ca when the file is present,
but not causing an error when it isn't.
Per bug 6189, reported by Srinivas Aji
We've now seen more than one gripe from somebody who didn't get the memo
about how to install contrib modules in 9.1. Try to make it a little more
prominent that you aren't supposed to call the scripts directly anymore.
This example wasn't updated when we changed the behavior of bpcharlen()
in 8.0, nor when we changed the number of parameters taken by the bpchar()
cast function in 7.3. Per report from lsliang.
The previous coding resulted in contrib modules unintentionally overriding
the use of CONTRIB_TESTDB. There seems no particularly good reason to
allow that (after all, the makefile can set CONTRIB_TESTDB if that's really
what it intends).
In passing, document REGRESS_OPTS where the other pgxs.mk options are
documented.
Back-patch to 9.1 --- in prior versions, there were no cases of contrib
modules setting REGRESS_OPTS without including the --dbname switch, so
while the coding was fragile there was no actual bug.
There is what may actually be a mistake in our markup. The problem is
in a situation like
<para>
<command>FOO</command> is ...
there is strictly speaking a line break before "FOO". In the HTML
output, this does not appear to be a problem, but in the man page
output, this shows up, so you get double blank lines at odd places.
So far, we have attempted to work around this with an XSL hack, but
that causes other problems, such as creating run-ins in places like
<acronym>SQL</acronym> <command>COPY</command>
So fix the problem properly by removing the extra whitespace. I only
fixed the problems that affect the man page output, not all the
places.
Somebody added a cross-reference to shared_preload_libraries, but wrote the
wrong variable name when they did it (and didn't bother to make it a link
either).
Spotted by Christoph Anton Mitterer.
Also change "switch" to "arg" because "switch" is a bit of a sloppy
term. So the environment variable is called
PSQL_EDITOR_LINENUMBER_ARG. Set "+" as hardcoded default value on
Unix (since "vi" is the hardcoded default editor), so many users won't
have to configure this at all. Move the documentation around a bit to
centralize the editor configuration under environment variables,
rather than repeating bits of it under every backslash command that
invokes an editor.
This function supports untranslated detail messages, in the same way that
errmsg_internal supports untranslated primary messages. We've needed this
for some time IMO, but discussion of some cases in the SSI code provided
the impetus to actually add it.
Kevin Grittner, with minor adjustments by me
In the example for decode(), show the bytea result in hex format,
since that's now the default. Use an E'' string in the example for
quote_literal(), so that it works regardless of the
standard_conforming_strings setting. On the functions-for-binary-strings
page, leave the examples as-is for readability, but add a note pointing out
that they are shown in escape format. Per comments from Thom Brown.
Also, improve the description for encode() and decode() a tad.
Backpatch to 9.0, where bytea_output was introduced.
Per discussion, this structure seems more understandable than what was
there before. Make config.sgml and postgresql.conf.sample agree.
In passing do a bit of editorial work on the variable descriptions.
As noted by Laurenz Albe, our SGML tools deal rather oddly with chapters
having just one <sect1>. Perhaps the tooling could be fixed, but really
the design of this chapter's introduction is pretty bogus anyhow. Split
it into a true introduction and a <sect1> about the FDW functions, so
that it reads better and dodges the lack-of-a-chapter-TOC problem.
Somehow, column rolconfig got removed from the documentation of the
pg_roles view in the 9.0 cycle, although the column is actually still
there. In 9.1, we'd also forgotten to document the rolreplication column.
Spotted by Sakamoto Masahiko.
Explain that querying pg_locks does not simultaneously lock both the
normal lock manager and the predicate lock manager.
Per discussion with Kevin Grittner.
The release notes may contain non-ASCII characters (for contributor
names), which lynx converts to the encoding determined by the current
locale. The get output that is deterministic and easily readable by
everyone, we make lynx produce LATIN1 and then convert that to ASCII
with transliteration for the non-ASCII characters.
This is a dangerous example to provide because on machines with GNU cp,
it will silently do the wrong thing and risk archive corruption. Worse,
during the 9.0 cycle somebody "improved" the discussion by removing the
warning that used to be there about that, and instead leaving the
impression that the command would work as desired on most Unixen.
It doesn't. Try to rectify the damage by providing an example that is safe
most everywhere, and then noting that you can try cp -i if you want but
you'd better test that.
In back-patching this to all supported branches, I also added an example
command for Windows, which wasn't provided before 9.0.
The initial commit of the ALTER TABLE ADD FOREIGN KEY NOT VALID feature
failed to support labeling such constraints as deferrable. The best fix
for this seems to be to fold NOT VALID into ConstraintAttributeSpec.
That's a bit more general than the documented syntax, but it allows
better-targeted syntax error messages.
In addition, do some mostly-but-not-entirely-cosmetic code review for
the whole NOT VALID patch.
... when talking about how good they are in replacement of bulk DELETE
in partitioned setups.
The original wording was a bit confusing.
Per an observation from David Wheeler.
The previous wording wasn't explicit enough, which could misled readers
into thinking that the locks acquired are more restricted in nature than
they really are. The resulting optimism can be damaging to morale when
confronted with reality, as has been observed in the field.
Greg Smith
This is more consistent with what we do elsewhere, and hopefully avoids
creating the perception that current_schemas takes no arguments.
As suggested by Brendan Jurd
The documentation of the columns collection_type_identifier and
dtd_identifier was wrong. This effectively reverts commits
8e1ccad519 and
57352df66d and updates the name
array_type_identifier (the name in SQL:1999) to
collection_type_identifier.
closes bug #5926
This is an ugly hack to get around the fact that significant parts of the
core backend assume they don't need to worry about passing collation to
equality and hashing functions. That's true for the core string datatypes,
but citext should ideally have equality behavior that depends on the
specified collation's LC_CTYPE. However, there's no chance of fixing the
core before 9.2, so we'll have to live with this compromise arrangement for
now. Per bug #6053 from Regina Obe.
The code changes in this commit should be reverted in full once the core
code is up to speed, but be careful about reverting the docs changes:
I fixed a number of obsolete statements while at it.
Since start/stop/restart/reload/status is a kind of standard command
set, it seems odd to insert the special-purpose "promote" in between
the closely related "restart" and "reload". So put it after "status"
in code and documentation.
Put the documentation of the -U option in some sensible place.
Rewrite the synopsis sentence in help and documentation to make it
less of a growing mouthful.
This is the original DocBook SGML limit, but apparently most
installations have changed it or ignore it, which is why few people
have run into this problem.
pointed out by Brendan Jurd
