Buildfarm members skink and sungazer have both recently failed this
test, with symptoms indicating that the default 3-second timeout
isn't quite enough for those very slow systems. There's no reason
to be miserly with this timeout, so boost it to 60 seconds.
Back-patch to all versions containing this test. That may be overkill,
because the failure has only been observed in the v10 branch, but
I don't feel like having to revisit this later.
The order in which GRANTs are output is important as GRANTs which have
been GRANT'd by individuals via WITH GRANT OPTION GRANTs have to come
after the GRANT which included the WITH GRANT OPTION. This happens
naturally in the backend during normal operation as we only change
existing ACLs in-place, only add new ACLs to the end, and when removing
an ACL we remove any which depend on it also.
Also, adjust the comments in acl.h to make this clear.
Unfortunately, the updates to pg_dump to handle initial privileges
involved pulling apart ACLs and then combining them back together and
could end up putting them back together in an invalid order, leading to
dumps which wouldn't restore.
Fix this by adjusting the queries used by pg_dump to ensure that the
ACLs are rebuilt in the same order in which they were originally.
Back-patch to 9.6 where the changes for initial privileges were done.
Commit 3eb9a5e7c unintentionally introduced an ordering dependency
into restore_toc_entries_prefork(). The existing coding of
reduce_dependencies() contains a check to skip moving a TOC entry
to the ready_list if it wasn't initially in the pending_list.
This used to suffice to prevent reduce_dependencies() from trying to
move anything into the ready_list during restore_toc_entries_prefork(),
because the pending_list stayed empty throughout that phase; but it no
longer does. The problem doesn't manifest unless the TOC has been
reordered by SortTocFromFile, which is how I missed it in testing.
To fix, just add a test for ready_list == NULL, converting the call
with NULL from a poor man's sanity check into an explicit command
not to touch TOC items' list membership. Clarify some of the comments
around this; in particular, note the primary purpose of the check for
pending_list membership, which is to ensure that we can't try to restore
the same item twice, in case a TOC list forces it to be restored before
its dependency count goes to zero.
Per report from Fabrízio de Royes Mello. Back-patch to 9.3, like the
previous commit.
Discussion: https://postgr.es/m/CAFcNs+pjuv0JL_x4+=71TPUPjdLHOXA4YfT32myj_OrrZb4ohA@mail.gmail.com
Because we push all ACL (i.e. GRANT/REVOKE) restore steps to the end,
materialized view refreshes were occurring while the permissions on
referenced objects were still at defaults. This led to failures if,
say, an MV owned by user A reads from a table owned by user B, even
if B had granted the necessary privileges to A. We've had multiple
complaints about that type of restore failure, most recently from
Jordan Gigov.
The ideal fix for this would be to start treating ACLs as dependency-
sortable objects, rather than hard-wiring anything about their dump order
(the existing approach is a messy kluge dating to commit dc0e76ca3).
But that's going to be a rather major change, and it certainly wouldn't
lead to a back-patchable fix. As a short-term solution, convert the
existing two-pass hack (ie, normal objects then ACLs) to a three-pass hack,
ie, normal objects then ACLs then matview refreshes. Because this happens
in RestoreArchive(), it will also fix the problem when restoring from an
existing archive-format dump.
(Note this means that if a matview refresh would have failed under the
permissions prevailing at dump time, it'll fail during restore as well.
We'll define that as user error rather than something we should try
to work around.)
To avoid performance loss in parallel restore, we need the matview
refreshes to still be parallelizable. Hence, clean things up enough
so that both ACLs and matviews are handled by the parallel restore
infrastructure, instead of reverting back to serial restore for ACLs.
There is still a final serial step, but it shouldn't normally have to
do anything; it's only there to try to recover if we get stuck due to
some problem like unresolved circular dependencies.
Patch by me, but it owes something to an earlier attempt by Kevin Grittner.
Back-patch to 9.3 where materialized views were introduced.
Discussion: https://postgr.es/m/28572.1500912583@sss.pgh.pa.us
Commit 4d57e83816 added support for getting I/O errors out of zlib,
but it introduced a portability problem for systems without zlib.
Repair by wrapping the zlib call inside #ifdef and restore the original
code in the other branch.
This serves to illustrate the inadequacy of the zlib abstraction in
pg_backup_archiver: there is no way to call gzerror() in that
abstraction. This means that the several places that call GZREAD and
GZWRITE are currently doing error reporting wrongly, but ENOTIME to get
it fixed before next week's release set.
Backpatch to 9.4, like the commit that introduced the problem.
Some error reports were reporting strerror(errno), which for some error
conditions coming from zlib are wrong, resulting in confusing reports
such as
pg_restore: [compress_io] could not read from input file: Success
which makes no sense. To correctly extract the error message we need to
use gzerror(), so let's do that.
This isn't as comprehensive or as neat as I would like, but at least it
should improve things in many common cases. The zlib abstraction in
compress_io does not seem to be applied consistently enough; we could
perhaps improve that, but it seems master-only material, not a bug fix
for back-patching.
This problem goes back all the way, but I decided to apply back to 9.4
only, because older branches don't contain commit 14ea89366 which this
change depends on.
Authors: Vladimir Kunschikov, Álvaro Herrera
Discussion: https://postgr.es/m/1498120508308.9826@infotecs.ru
The comment for dumpACL() got neglected when initacls and initracls were
added and the discussion of what 'racls' is wasn't very clear either.
Per complaint from Tom.
Fix assorted places that had not bothered with the convention of
prefixing catalog and function names with "pg_catalog.". That
could possibly result in query failure when running with a nondefault
search_path. Also fix two places that weren't quoting OID literals.
I think the latter hasn't mattered much since about 7.3, but it's still
a bad idea to be doing it in 99 places and not in 2 others.
Also remove a useless EXISTS sub-select that someone had stuck into
describeOneTableDetails' queries for child tables. We just got the OID
out of pg_class, so I hardly see how checking that it exists in pg_class
was doing anything helpful.
In passing, try to improve the emitted formatting of a couple of
these queries, though I didn't work really hard on that. And merge
unnecessarily duplicative coding in some other places.
Much of this was new in HEAD, but some was quite old; back-patch
as appropriate.
pg_dump with the --clean option failed to emit DROP EVENT TRIGGER
commands for event triggers. In a closely related oversight,
it also did not emit ALTER OWNER commands for event triggers.
Since only superusers can create event triggers, the latter oversight
is of little practical consequence ... but if we're going to record
an owner for event triggers, then surely pg_dump should preserve it.
Per complaint from Greg Atkins. Back-patch to 9.3 where event triggers
were introduced.
Discussion: https://postgr.es/m/20170722191142.yi4e7tzcg3iacclg@gmail.com
When incrementally updating a file larger than 2GB, the old code could
either fail outright (if the client asked the server for bytes beyond
the 2GB boundary) or fail to copy all the blocks that had actually
been modified (if the server reported a file size to the client in
excess of 2GB), resulting in data corruption. Generally, such files
won't occur anyway, but they might if using a non-default segment size
or if there the directory contains stray files unrelated to
PostgreSQL. Fix by a more prudent choice of data types.
Even with these improvements, this code still uses a mix of different
types (off_t, size_t, uint64, int64) to represent file sizes and
offsets, not all of which necessarily have the same width or
signedness, so further cleanup might be in order here. However, at
least now they all have the potential to be 64 bits wide on 64-bit
platforms.
Kuntal Ghosh and Michael Paquier, with a tweak by me.
Discussion: http://postgr.es/m/CAGz5QC+8gbkz=Brp0TgoKNqHWTzonbPtPex80U0O6Uh_bevbaA@mail.gmail.com
In the frontend Makefiles that pull in libpgfeutils, we'd generally
done it like this:
LDFLAGS += -L$(top_builddir)/src/fe_utils -lpgfeutils $(libpq_pgport)
That method is badly broken, as seen in bug #14742 from Chris Ruprecht.
The -L flag for src/fe_utils ends up being placed after whatever random
-L flags are in LDFLAGS already. That puts us at risk of pulling in
libpgfeutils.a from some previous installation rather than the freshly
built one in src/fe_utils. Also, the lack of an "override" is hazardous
if someone tries to specify some LDFLAGS on the make command line.
The correct way to do it is like this:
override LDFLAGS := -L$(top_builddir)/src/fe_utils -lpgfeutils $(libpq_pgport) $(LDFLAGS)
so that libpgfeutils, along with libpq, libpgport, and libpgcommon, are
guaranteed to be pulled in from the build tree and not from any referenced
system directory, because their -L flags will appear first.
In some places we'd been even lazier and done it like this:
LDFLAGS += -L$(top_builddir)/src/fe_utils -lpgfeutils -lpq
which is subtly wrong in an additional way: on platforms where we can't
restrict the symbols exported by libpq.so, it allows libpgfeutils to
latch onto libpgport and libpgcommon symbols from libpq.so, rather than
directly from those static libraries as intended. This carries hazards
like those explained in the comments for the libpq_pgport macro.
In addition to fixing the broken libpgfeutils usages, I tried to
standardize on using $(libpq_pgport) like so:
override LDFLAGS := $(libpq_pgport) $(LDFLAGS)
even where libpgfeutils is not in the picture. This makes no difference
right now but will hopefully discourage future mistakes of the same ilk.
And it's more like the way we handle CPPFLAGS in libpq-using Makefiles.
In passing, just for consistency, make pgbench include PTHREAD_LIBS the
same way everyplace else does, ie just after LIBS rather than in some
random place in the command line. This might have practical effect if
there are -L switches in that macro on some platform.
It looks to me like the MSVC build scripts are not affected by this
error, but someone more familiar with them than I might want to double
check.
Back-patch to 9.6 where libpgfeutils was introduced. In 9.6, the hazard
this error creates is that a reinstallation might link to the prior
installation's copy of libpgfeutils.a and thereby fail to absorb a
minor-version bug fix.
Discussion: https://postgr.es/m/20170714125106.9231.13772@wrigleys.postgresql.org
When writing a backup to stdout with pg_basebackup on Windows, put stdout
to binary mode. Any CR bytes in the output will otherwise be output
incorrectly as CR+LF.
In the passing, standardize on using "_setmode" instead of "setmode", for
the sake of consistency. They both do the same thing, but according to
MSDN documentation, setmode is deprecated.
Fixes bug #14634, reported by Henry Boehlert. Patch by Haribabu Kommi.
Backpatch to all supported versions.
Discussion: https://www.postgresql.org/message-id/20170428082818.24366.13134@wrigleys.postgresql.org
Commit 330b84d8c4 didn't contemplate the case where the public schema
has been dropped and introduced a query which fails when there is no
public schema into pg_dump (when used with -c).
Adjust the query used by pg_dump to handle the case where the public
schema doesn't exist and add tests to check that such a case no longer
fails.
Back-patch the specific fix to 9.6, as the prior commit was.
Adding tests for this case involved adding support to the pg_dump
TAP tests to work with multiple databases, which, while not a large
change, is a bit much to back-patch, so that's only done in master.
Addresses bug #14650
Discussion: https://www.postgresql.org/message-id/20170512181801.1795.47483%40wrigleys.postgresql.org
When commit 0f33a719fd removed the
instructions to start/stop the new cluster before running rsync, it was
now possible for pg_resetwal/pg_resetxlog to leave the final WAL record
at wal_level=minimum, preventing upgraded standby servers from
reconnecting.
This patch fixes that by having pg_upgrade unconditionally start/stop
the new cluster after pg_resetwal/pg_resetxlog has run.
Backpatch through 9.2 since, though the instructions were added in PG
9.5, they worked all the way back to 9.2.
Discussion: https://postgr.es/m/20170620171844.GC24975@momjian.us
Backpatch-through: 9.2
When materialized views were added, psql's \d commands were made to
treat them as a separate object category ... but not everyplace in the
documentation or comments got the memo.
Noted by David Johnston. Back-patch to 9.3 where matviews came in.
Discussion: https://postgr.es/m/CAKFQuwb27M3VXRhHErjCpkWwN9eKThbqWb1=trtoXi9_ejqPXQ@mail.gmail.com
The combination of -Z -Fp and output to stdout resulted in corrupted
output data, because we left stdout in text mode, resulting in newline
conversion being done on the compressed stream. Switch stdout to binary
mode for this case, at the same place where we do it for non-text output
formats.
Report and patch by Kuntal Ghosh, tested by Ashutosh Sharma and Neha
Sharma. Back-patch to all supported branches.
Discussion: https://postgr.es/m/CAGz5QCJPvbBjXAmJuGx1B_41yVCetAJhp7rtaDf7XQGWuB1GSw@mail.gmail.com
The current method of computing the record length (excluding the
lenght of full-page images) has been wrong since the WAL format has
been revamped in 2c03216d83. Only the
main record's length was counted, but that can be significantly too
little if there's data associated with further blocks.
Fix by computing the record length as total_lenght - fpi_length.
Reported-By: Chen Huajun
Bug: #14687
Reviewed-By: Heikki Linnakangas
Discussion: https://postgr.es/m/20170603165939.1436.58887@wrigleys.postgresql.org
Backpatch: 9.5-
pg_resetwal (formerly pg_resetxlog) doesn't insist on finding a matching
version number in pg_control, and that seems like an important thing to
preserve since recovering from corrupt pg_control is a prime reason to
need to run it. However, that means you can try to run it against a
data directory of a different major version, which is at best useless
and at worst disastrous. So as to provide some protection against that
type of pilot error, inspect PG_VERSION at startup and refuse to do
anything if it doesn't match. PG_VERSION is read-only after initdb,
so it's unlikely to get corrupted, and even if it were corrupted it would
be easy to fix by hand.
This hazard has been there all along, so back-patch to all supported
branches.
Michael Paquier, with some kibitzing by me
Discussion: https://postgr.es/m/f4b8eb91-b934-8a0d-b3cc-68f06e2279d1@enterprisedb.com
If an operator class has no operators or functions, and doesn't need
a STORAGE clause, we emitted "CREATE OPERATOR CLASS ... AS ;" which
is syntactically invalid. Fix by forcing a STORAGE clause to be
emitted anyway in this case.
(At some point we might consider changing the grammar to allow CREATE
OPERATOR CLASS without an opclass_item_list. But probably we'd want to
omit the AS in that case, so that wouldn't fix this pg_dump issue anyway.)
It's been like this all along, so back-patch to all supported branches.
Daniel Gustafsson, tweaked by me to avoid a dangling-pointer bug
Discussion: https://postgr.es/m/D9E5FC64-7A37-4F3D-B946-7E4FB468F88A@yesql.se
When stdin is a terminal, it's possible to end a COPY FROM STDIN with
a keyboard EOF signal (typically control-D), and then keep on issuing
SQL commands. One would expect another COPY FROM STDIN to work as well,
but on some platforms it did not. This turns out to be because we were
not resetting the stream's feof() flag, and BSD-ish versions of fread()
and fgets() won't attempt to read more data if that's set.
The misbehavior is observed on BSDen (including macOS), but not Linux,
Windows, or SysV-ish Unixen, which makes this a portability bug not
just a missing feature.
Add a clearerr() call to fix the behavior, and improve the prompt that's
issued when copying from a TTY to mention that EOF signals work.
It's been like this forever, so back-patch to all supported branches.
Thomas Munro
Discussion: https://postgr.es/m/CAEepm=0MCGfYf=JAMiYhO6JPtv9-3ZfBo8fcGeCZ8oMzaw+Z+Q@mail.gmail.com
buildDefaultACLCommands() didn't destroy the string buffer created in
certain cases, leading to a memory leak. Fix by destroying the buffer
before returning from the function.
Spotted by Coverity.
Author: Michael Paquier
Back-patch to 9.6 where buildDefaultACLCommands() was added.
The POSIX standard does not say that the success return value for
fcntl(F_SETFD) and fcntl(F_SETFL) is zero; it says only that it's not -1.
We had several calls that were making the stronger assumption. Adjust
them to test specifically for -1 for strict spec compliance.
The standard further leaves open the possibility that the O_NONBLOCK
flag bit is not the only active one in F_SETFL's argument. Formally,
therefore, one ought to get the current flags with F_GETFL and store
them back with only the O_NONBLOCK bit changed when trying to change
the nonblock state. In port/noblock.c, we were doing the full pushup
in pg_set_block but not in pg_set_noblock, which is just weird. Make
both of them do it properly, since they have little business making
any assumptions about the socket they're handed. The other places
where we're issuing F_SETFL are working with FDs we just got from
pipe(2), so it's reasonable to assume the FDs' properties are all
default, so I didn't bother adding F_GETFL steps there.
Also, while pg_set_block deserves some points for trying to do things
right, somebody had decided that it'd be even better to cast fcntl's
third argument to "long". Which is completely loony, because POSIX
clearly says the third argument for an F_SETFL call is "int".
Given the lack of field complaints, these missteps apparently are not
of significance on any common platforms. But they're still wrong,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/30882.1492800880@sss.pgh.pa.us
This backpatches 51e26c9 and 7220c7b, including both documentation
updates clarifying the checkpoints at the beginning of base backups and
the messages in verbose and progress mdoe of pg_basebackup.
Author: Michael Banck
Discussion: https://postgr.es/m/21444.1488142764%40sss.pgh.pa.us
We were assigning values near 255 through "char *" pointers. On machines
where char is signed, that's not entirely kosher, and it's reasonable
for compilers to warn about it.
A better solution would be to change the pointer type to "unsigned char *",
but that would be vastly more invasive. For the moment, let's just apply
this simple backpatchable solution.
Aleksander Alekseev
Discussion: https://postgr.es/m/20170220141239.GD12278@e733.localdomain
Discussion: https://postgr.es/m/2839.1490714708@sss.pgh.pa.us
The bug is that prior to --rate doCustom was always disconnect/reconnect
without exiting, but with rate it returns if it has to wait. However threadRun
test whether there is a connection before recalling doCustom, so it was never
called.
Bug is not existed in head branch because of refactoring at
12788ae49e, patch only 9.6
Author: Fabien Coelho
Reviewed-by: me
https://commitfest.postgresql.org/13/970/
Commits 89e0bac86 et al replaced newlines with spaces in object names
printed in SQL comments, but we neglected to consider that the same
names are also printed by "pg_restore -l", and a newline would render
the output unparseable by "pg_restore -L". Apply the same replacement
in "-l" output. Since "pg_restore -L" doesn't actually examine any
object names, only the dump ID field that starts each line, this is
enough to fix things for its purposes.
The previous fix was treated as a security issue, and we might have
done that here as well, except that the issue was reported publicly
to start with. Anyway it's hard to see how this could be exploited
for SQL injection; "pg_restore -L" doesn't do much with the file
except parse it for leading integers.
Per bug #14587 from Milos Urbanek. Back-patch to all supported versions.
Discussion: https://postgr.es/m/20170310155318.1425.30483@wrigleys.postgresql.org
Not only did it not accept --builtin as a synonym for -b, but what it did
accept as a synonym was --tpc-b (huh?), which it got even further wrong
by marking as no_argument, so that if you did try that you got a core
dump. I suppose this is leftover from some early design for the new
switches added by commit 8bea3d221, but it's still pretty sloppy work.
Per bug #14580 from Stepan Pesternikov. Back-patch to 9.6 where the
error was introduced.
Report: https://postgr.es/m/20170307123347.25054.73207@wrigleys.postgresql.org
pg_dump has always handled the public schema in a special way when it
comes to the "--clean" option. To wit, we do not drop or recreate the
public schema in "normal" mode, but when we are run in "--clean" mode
then we do drop and recreate the public schema.
When running in "--clean" mode, the public schema is dropped and then
recreated and it is recreated with the normal schema-default privileges
of "nothing". This is unlike how the public schema starts life, which
is to have CREATE and USAGE GRANT'd to the PUBLIC role, and that is what
is recorded in pg_init_privs.
Due to this, in "--clean" mode, pg_dump would mistakenly only dump out
the set of privileges required to go from the initdb-time privileges on
the public schema to whatever the current-state privileges are. If the
privileges were not changed from initdb time, then no privileges would
be dumped out for the public schema, but with the schema being dropped
and recreated, the result was that the public schema would have no ACLs
on it instead of what it should have, which is the initdb-time
privileges.
Practically speaking, this meant that pg_dump with --clean mode dumping
a database where the ACLs on the public schema were not changed from the
default would, upon restore, result in a public schema with *no*
privileges GRANT'd, not matching the state of the existing database
(where the initdb-time privileges would have been CREATE and USAGE to
the PUBLIC role for the public schema).
To fix, adjust the query in getNamespaces() to ignore the pg_init_privs
entry for the public schema when running in "--clean" mode, meaning that
the privileges for the public schema would be dumped, correctly, as if
it was going from a newly-created schema to the current state (which is,
indeed, what will happen during the restore thanks to the DROP/CREATE).
Only the public schema is handled in this special way by pg_dump, no
other initdb-time objects are dropped/recreated in --clean mode.
Back-patch to 9.6 where the bug was introduced.
Discussion: https://postgr.es/m/3534542.o3cNaKiDID%40techfox
We attached no schema label to comments for procedural languages, casts,
transforms, operator classes, operator families, or text search objects.
The first three categories of objects don't really have schemas, but
pg_dump treats them as if they do, and it seems like the TocEntry fields
for their comments had better match the TocEntry fields for the parent
objects. (As an example of a possible hazard, the type names in a CAST
will be formatted with the assumption of a particular search_path, so
failing to ensure that this same path is active for the COMMENT ON command
could lead to an error or to attaching the comment to the wrong cast.)
In the last six cases, this was a flat-out error --- possibly mine to
begin with, but it was a long time ago.
The security label for a procedural language was likewise not correctly
labeled as to schema, and both the comment and security label for a
procedural language were not correctly labeled as to owner.
In simple cases the restore would accidentally work correctly anyway, since
these comments and security labels would normally get emitted right after
the owning object, and so the search path and active user would be correct
anyhow. But it could fail in corner cases; for example a schema-selective
restore would omit comments it should include.
Giuseppe Broccolo noted the oversight, and proposed the correct fix, for
text search dictionary objects; I found the rest by cross-checking other
dumpComment() calls. These oversights are ancient, so back-patch all
the way.
Discussion: https://postgr.es/m/CAFzmHiWwwzLjzwM4x5ki5s_PDMR6NrkipZkjNnO3B0xEpBgJaA@mail.gmail.com
When performing a pg_upgrade, we copy the files behind pg_largeobject
and pg_largeobject_metadata, allowing us to avoid having to dump out and
reload the actual data for large objects and their ACLs.
Unfortunately, that isn't all of the information which can be associated
with large objects. Currently, we also support COMMENTs and SECURITY
LABELs with large objects and these were being silently dropped during a
pg_upgrade as pg_dump would skip everything having to do with a large
object and pg_upgrade only copied the tables mentioned to the new
cluster.
As the file copies happen after the catalog dump and reload, we can't
simply include the COMMENTs and SECURITY LABELs in pg_dump's binary-mode
output but we also have to include the actual large object definition as
well. With the definition, comments, and security labels in the pg_dump
output and the file copies performed by pg_upgrade, all of the data and
metadata associated with large objects is able to be successfully pulled
forward across a pg_upgrade.
In 9.6 and master, we can simply adjust the dump bitmask to indicate
which components we don't want. In 9.5 and earlier, we have to put
explciit checks in in dumpBlob() and dumpBlobs() to not include the ACL
or the data when in binary-upgrade mode.
Adjustments made to the privileges regression test to allow another test
(large_object.sql) to be added which explicitly leaves a large object
with a comment in place to provide coverage of that case with
pg_upgrade.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/20170221162655.GE9812@tamriel.snowman.net
The recovery.conf file that's generated is specifically for replication,
and not needed (or wanted) for regular backup restore, so indicate that
in the message.
It wouldn't complete "TO" after the variable name, which is certainly
minor enough. But since we do complete "TO" after "SET variable ...",
and since this case used to work pre-9.6, I think this is a bug.
Also, fix the query used to collect the variable names; whoever last
touched it evidently didn't understand how the pieces are supposed
to fit together. It accidentally worked anyway, because readline
ignores irrelevant completions, but it was randomly unlike the ones
around it, and could be a source of actual bugs if someone copied
it as a prototype for another query.
In commit 23f34fa, we changed how ACLs were handled to use the new
pg_init_privs catalog and to dump out the ACL commands as REVOKE+GRANT
combinations instead of trying to REVOKE all rights always and then
GRANT back just the ones which were in place.
Unfortunately, the DEFAULT PRIVILEGES system didn't quite get the
correct treatment with this change and ended up (incorrectly) only
including positive GRANTs instead of both the REVOKEs and GRANTs
necessary to preserve the correct privileges.
There are only a couple cases where such REVOKEs are possible because,
generally speaking, there's few rights which exist on objects by
default to be revoked.
Examples of REVOKEs which weren't being correctly preserved are when
privileges are REVOKE'd from the creator/owner, like so:
ALTER DEFAULT PRIVILEGES
FOR ROLE myrole
REVOKE SELECT ON TABLES FROM myrole;
or when other default privileges are being revoked, such as EXECUTE
rights granted to public for functions:
ALTER DEFAULT PRIVILEGES
FOR ROLE myrole
REVOKE EXECUTE ON FUNCTIONS FROM PUBLIC;
Fix this by correctly working out what the correct REVOKE statements are
(if any) and dump them out, just as we do for everything else.
Noticed while developing additional regression tests for pg_dump, which
will be landing shortly.
Back-patch to 9.6 where the bug was introduced.
When considering a sequence's Data entry in dumpSequenceData, we were
actually looking at the sequence definition's dump flag to decide if we
should dump the data or not. That's generally fine, except for when the
sequence data entry was created by processExtensionTables() because it's
a config sequence. In that case, the sequence itself won't be marked as
dumping data because it's part of an extension, leading to the need for
processExtensionTables() to create the sequence data entry.
This leads to extension config sequence data not being included in the
dump when it should be. Fix this by looking at the sequence data's dump
flag instead, just as dumpTableData() was doing for tables (which is why
config tables were correctly being handled), and add a regression test
to make sure we don't break it moving forward.
All of this is a bit round-about since we can now represent which
components of a given dump item should be dumped out through the dump
flag. A future improvement might be to change checkExtensionMembership()
to check for config sequences/tables and set the dump flag based on that
directly, possibly removing the need for processExtensionTables().
Bug found by Daniele Varrazzo.
Discussion: https://postgr.es/m/CA+mi_8ZmxQM7+nZ7pJ8uyfxc9V3o=UAG14dVqvftdmvw8OJ3gQ@mail.gmail.com
Patch by Michael Paquier, with some tweaking of the regression tests by
me.
Back-patch to 9.6 where the bug was introduced.
