a hung client or lost connection can't indefinitely block a postmaster
child (not to mention the possibility of deliberate DoS attacks).
Timeout is controlled by new authentication_timeout GUC variable,
which I set to 60 seconds by default ... does that seem reasonable?
rather than making index.html a symlink to the autogenerated name.
Fixes fatal problems with tar programs that don't handle symlinks
very well (MacOS X).
(The names user.html, admin.html, etc. are still available as make
targets, but they aren't packaged anymore.)
Use the manifest file that the stylesheets generate as the file list
for packaging. Put graphics in the right place while building, not
while packaging, so you can actually look at them after building.
under libdir, for a cleaner separation in the installation layout
and compatibility with binary packaging standards. Point backend's
default search location there. The contrib modules are also
installed in the said location, giving them the benefit of the
default search path as well. No changes in user interface
nevertheless.
CREATE RULE bad_rule_combination_1 AS
ON SELECT TO emp
DO INSTEAD
SELECT * FROM toyemp;
CREATE RULE bad_rule_combination_2 AS
ON SELECT TO toyemp
DO INSTEAD
SELECT * FROM emp;
Tatsuo Ishii
undocumented items in TD.
Should doc patches alse be sent to pgsql-patches, or do I
have to subscribe to pgsql-docs?
The archive link for pgsql-patches is broken, and I don't
see any patches in spot checking the archive for pgsql-docs.
-Brad McLean.
Assign the fixed user id 1 to the user created by initdb.
A stand-alone backend will always set the user id to 1.
(Consequently, the name of that user is no longer important.)
In stand-alone mode, the user id 1 will have implicit superuser
status, to allow repairs even if there are no users defined.
Print a warning message when starting in stand-alone mode when no
users are defined.
Disallow dropping the current user and session user.
Granting/revoking superuser status also grants/revokes usecatupd.
(Previously, it would never grant it back. This could lead to "deadlocks".)
CREATE USER and CREATE GROUP will start allocating user ids at 100
(unless explicitly specified), to prevent accidental creation of a
superuser (plus some room for future extensions).
discussion on pgsql-hackers (especially the frightening memory dump in
<12273.999562219@sss.pgh.pa.us>), we decided that it is best not to
use identifiers from an untrusted source at all. Therefore, all
claims of the suitability of PQescapeString() for identifiers have
been removed.
Florian Weimer
table creation time. Big deal you say - but this patch is the basis of the
next thing which is adding PRIMARY KEYs after table creation time. (Which
is currently impossible without twiddling catalogs)
Rundown
-------
* I have made the makeObjectName function of analyze.c non-static, and
exported it in analyze.h
* I have included analyze.h and defrem.h into command.c, to support
makingObjectNames and creating indices
* I removed the 'case CONSTR_PRIMARY' clause so that it properly fails and
says you can't add primary keys, rather than just doing nothing and
reporting nothing!!!
* I have modified the docs.
Algorithm
---------
* If name specified is null, search for a new valid constraint name. I'm
not sure if I should "lock" my generated name somehow tho - should I open
the relation before doing this step?
* Open relation in access exclusive mode
* Check that the constraint does not already exist
* Define the new index
* Warn if they're doubling up on an existing index
Christopher Kings-Lynne
occur unconditionally, even if the rule should otherwise execute
conditionally. This is more useful than giving an error, even though it's
not truly the correct behavior. Per today's pghackers discussion.
> pam_strerror() should be used a few more times, rather than just saying
> "Error!". Also, the configure.in snippet seems wrong. You add
> -I$pam_prefix/include/security to $INCLUDES and then you #include
> <security/pam_appl.h>. This whole thing is probably unnecessary, since
> PAM is a system library on the systems where it exists, so the headers
> and libraries are found automatically, unlike OpenSSL and
> Kerberos.
See attached revised patch. (I'm sure the configure.in stuff can be done
right/better, I'm just not enough of a autoconf guru to know what to
change it to.)
Dominic J. Eidson
- new millisecond (ms) and microsecond (us) support
- more robus parsing from string - used is separator checking for
non-exact formats like to_date('2001-9-1', 'YYYY-MM-DD')
- SGML docs are included
Karel Zak
Now with documentation update and disabling of UTF conversion for Tcl <=8.0
On Fri, 24 Aug 2001, Vsevolod Lobko wrote:
> On Thu, 23 Aug 2001, Tom Lane wrote:
>
> > > Is this looks better?
> >
> > It does, but one small gripe: the lack of semicolons will probably cause
> > pg_indent to mess up the indentation. (I know emacs' autoindent mode
> > will not work nicely with it, either.) Please set up the macros so that
> > you write
> >
> > UTF_BEGIN;
> > Tcl_DStringAppend(&unknown_src, UTF_E2U(part), -1);
> > UTF_END;
> >
> > and then I'll be happy.
>
> Attached revised patch
>
> > Your point about overhead is a good one, so I retract the gripe about
> > using a configure switch. But please include documentation patches to
> > describe the configure option in the administrator's guide (installation
> > section).
>
> This patch still uses configure switch for enabling feature.
>
> For enabling based on tcl version we have 2 posibilites:
> 1) having feature enabled by default, but in pltcl.c check for tcl
> version and disable it for old versions
> 2) enable or disable at configure time based on tcl version, but there
> are problem - current configure don't checks for tcl version at all
> and my configure skills not enought for adding this
>
Vsevolod Lobko
If there's anyone out there who's actually using datatype-defined
default values, this will be an incompatible change in behavior ...
but the old behavior was so broken that I doubt anyone was using it.
system. Some systems did not understand the 'l' section, and in general
it wasn't entirely appropriate.
On SCO OpenServer, the man pages won't be installed at all until someone
figures out their man system.
Client headers are no longer in a subdirectory, since they have been made
namespace-clean.
Internal libpq headers are in a private subdirectory.
Server headers are in a private subdirectory. pg_config has a new option
to point there.
the Admin Guide about routine maintenance tasks. Currently this only
discusses the various reasons for doing VACUUM, but perhaps it could be
fleshed out with topics like log rotation.
buffer manager with 'pg_clog', a specialized access method modeled
on pg_xlog. This simplifies startup (don't need to play games to
open pg_log; among other things, OverrideTransactionSystem goes away),
should improve performance a little, and opens the door to recycling
commit log space by removing no-longer-needed segments of the commit
log. Actual recycling is not there yet, but I felt I should commit
this part separately since it'd still be useful if we chose not to
do transaction ID wraparound.
pgsql-hackers. pg_opclass now has a row for each opclass supported by each
index AM, not a row for each opclass name. This allows pg_opclass to show
directly whether an AM supports an opclass, and furthermore makes it possible
to store additional information about an opclass that might be AM-dependent.
pg_opclass and pg_amop now store "lossy" and "haskeytype" information that we
previously expected the user to remember to provide in CREATE INDEX commands.
Lossiness is no longer an index-level property, but is associated with the
use of a particular operator in a particular index opclass.
Along the way, IndexSupportInitialize now uses the syscaches to retrieve
pg_amop and pg_amproc entries. I find this reduces backend launch time by
about ten percent, at the cost of a couple more special cases in catcache.c's
IndexScanOK.
Initial work by Oleg Bartunov and Teodor Sigaev, further hacking by Tom Lane.
initdb forced.
has an alias SERIAL4 and a sister SERIAL8. SERIAL8 is just the same
except the created column is type int8 not int4.
initdb forced. Note this also breaks any chance of pg_upgrade from 7.1,
unless we hack up pg_upgrade to drop and recreate sequences. (Which is
not out of the question, but I don't wanna do it.)
Allow pg_shadow to be MD5 encrypted.
Add ENCRYPTED/UNENCRYPTED option to CREATE/ALTER user.
Add password_encryption postgresql.conf option.
Update wire protocol version to 2.1.
for speed reasons; its result type also changes to int8. avg() on these
datatypes now accumulates the running sum in int8 for speed; but we still
deliver the final result as numeric, so that fractional accuracy is
preserved.
count() now counts and returns in int8, not int4. I am a little nervous
about this possibly breaking users' code, but there didn't seem to be
a strong sentiment for avoiding the problem. If we get complaints during
beta, we can change count back to int4 and add a "count8" aggregate.
For that matter, users can do it for themselves with a simple CREATE
AGGREGATE command; the int4inc function is still present, so no C hacking
is needed.
Also added max() and min() aggregates for OID that do proper unsigned
comparison, instead of piggybacking on int4 aggregates.
initdb forced.
syntax for language names (instead of 'string').
createlang now handles the case where a second language uses the same call
handler as an already installed language (e.g., plperl/plperlu).
droplang now handles the reverse case, i.e., dropping a language where
the call handler is still used by another language. Moreover, droplang
can now be used to drop any user-defined language, not just the supplied
ones.
Don't hardcode the maximum accepted server version, use PG_VERSION instead.
Install a notice processor so notices are handled like error messages.
Word smithing.
default, but OIDS are removed from many system catalogs that don't need them.
Some interesting side effects: TOAST pointers are 20 bytes not 32 now;
pg_description has a three-column key instead of one.
Bugs fixed in passing: BINARY cursors work again; pg_class.relhaspkey
has some usefulness; pg_dump dumps comments on indexes, rules, and
triggers in a valid order.
initdb forced.
clauses are equal(), before trying to match them up using btree opclass
inference rules. This allows it to recognize many simple cases involving
non-btree operations, for example 'x IS NULL'. Clean up code a little.
Sorry I don't have the original around to make a quick diff, but its a very small change... I think this should be in the next release, there's no reason not to have it.
its a function with no expected arguments, so you can use it like:
spi_exec "INSERT INTO mytable(columns...) VALUES(values..)"
set oid [spi_lastoid]
spi_exec "SELECT mytable_id from mytable WHERE oid=$oid"
It just didn't make sense for me to use plpgsql and pltcl, or just screw
them both and use SPI from C.
bob@redivi.com
system supports SO_PEERCRED requests for Unix sockets. This is an
amalgamation of patches submitted by Helge Bahmann and Oliver Elphick,
with some editorializing by yours truly.
Note: I didn't force an initdb, figuring that one today was enough.
However, there is a new function in pg_proc.h, and pg_dump won't be
able to dump partial indexes until you add that function.
per previous discussion on pghackers. Most of the duplicate code in
different AMs' ambuild routines has been moved out to a common routine
in index.c; this means that all index types now do the right things about
inserting recently-dead tuples, etc. (I also removed support for EXTEND
INDEX in the ambuild routines, since that's about to go away anyway, and
it cluttered the code a lot.) The retail indextuple deletion routines have
been replaced by a "bulk delete" routine in which the indexscan is inside
the access method. I haven't pushed this change as far as it should go yet,
but it should allow considerable simplification of the internal bookkeeping
for deletions. Also, add flag columns to pg_am to eliminate various
hardcoded tests on AM OIDs, and remove unused pg_am columns.
Fix rtree and gist index types to not attempt to store NULLs; before this,
gist usually crashed, while rtree managed not to crash but computed wacko
bounding boxes for NULL entries (which might have had something to do with
the performance problems we've heard about occasionally).
Add AtEOXact routines to hash, rtree, and gist, all of which have static
state that needs to be reset after an error. We discovered this need long
ago for btree, but missed the other guys.
Oh, one more thing: concurrent VACUUM is now the default.
USER and ALTER USER to appear in any order, not only the fixed order
they used to be required to appear in.
Also, some changes from Tom Lane to create a FULL option for VACUUM;
it doesn't do anything yet, but I needed to change many of the same
files to make that happen, so now seemed like a good time.
in cases of qualified rules as well as unqualified ones. Tweak rules
test to avoid cluttering output with dummy SELECT results. Update
documentation to match code.
do anything yet, but it has the necessary connections to initialization
and so forth. Make some gestures towards allowing number of blocks in
a relation to be BlockNumber, ie, unsigned int, rather than signed int.
(I doubt I got all the places that are sloppy about it, yet.) On the
way, replace the hardwired NLOCKS_PER_XACT fudge factor with a GUC
variable.
tests to return the correct results per SQL9x when given NULL inputs.
Reimplement these tests as well as IS [NOT] NULL to have their own
expression node types, instead of depending on special functions.
From Joe Conway, with a little help from Tom Lane.
pg_database now has unique indexes on oid and on datname.
pg_shadow now has unique indexes on usename and on usesysid.
pg_am now has unique index on oid.
pg_opclass now has unique index on oid.
pg_amproc now has unique index on amid+amopclaid+amprocnum.
Remove pg_rewrite's unnecessary index on oid, delete unused RULEOID syscache.
Remove index on pg_listener and associated syscache for performance reasons
(caching rows that are certain to change before you need 'em again is
rather pointless).
Change pg_attrdef's nonunique index on adrelid into a unique index on
adrelid+adnum.
Fix various incorrect settings of pg_class.relisshared, make that the
primary reference point for whether a relation is shared or not.
IsSharedSystemRelationName() is now only consulted to initialize relisshared
during initial creation of tables and indexes. In theory we might now
support shared user relations, though it's not clear how one would get
entries for them into pg_class &etc of multiple databases.
Fix recently reported bug that pg_attribute rows created for an index all have
the same OID. (Proof that non-unique OID doesn't matter unless it's
actually used to do lookups ;-))
There's no need to treat pg_trigger, pg_attrdef, pg_relcheck as bootstrap
relations. Convert them into plain system catalogs without hardwired
entries in pg_class and friends.
Unify global.bki and template1.bki into a single init script postgres.bki,
since the alleged distinction between them was misleading and pointless.
Not to mention that it didn't work for setting up indexes on shared
system relations.
Rationalize locking of pg_shadow, pg_group, pg_attrdef (no need to use
AccessExclusiveLock where ExclusiveLock or even RowExclusiveLock will do).
Also, hold locks until transaction commit where necessary.
for GRANT/REVOKE is now just that, not "CHANGE".
On the way, migrate some of the aclitem internal representation away from
the parser and build a real parse tree instead. Also add some 'const'
qualifiers.
Use --enable-nls to turn it on; see installation instructions for details.
See developer's guide how to make use of it in programs and how to add
translations.
psql sources have been almost fully prepared and an incomplete German
translation has been provided. In the backend, only elog() calls are
currently translatable, and the provided German translation file is more
of a placeholder.
report on old-style functions invoked by RI triggers. We had a number of
other places that were being sloppy about which memory context FmgrInfo
subsidiary data will be allocated in. Turns out none of them actually
cause a problem in 7.1, but this is for arcane reasons such as the fact
that old-style triggers aren't supported anyway. To avoid getting burnt
later, I've restructured the trigger support so that we don't keep trigger
FmgrInfo structs in relcache memory. Some other related cleanups too:
it's not really necessary to call fmgr_info at all while setting up
the index support info in relcache entries, because those ScanKeyEntry
structs are never used to invoke the functions. This should speed up
relcache initialization a tiny bit.
7.7. Keys
you have
However, my application requires that each collection will also have a
unique name. Why? So that a human being who wants to modify a collection
will be able to identify it. It's much harder to know, if you have two
collections named "Life Science", the the one tagged 24433 is the one
you
need, and the one tagged 29882 is not
I think 'the the' shouldn't be repeated twice. Although taken from an
email it would be cool to fix.
Cheers,
Maxim Maletsky
which says that PERFORM will execute any SELECT query and discard the
result. The former implementation would in fact raise an error if the
result contained more than one row or more than one column.
Also, change plpgsql's error-logging mechanism to emit the additional
messages about error location at NOTICE rather than DEBUG level. This
allows them to be seen by the client without having to dig into the
postmaster log file (which may be nonexistent or inaccessible by the
client).
Indicies: palm_buy_date_idx
palm_user_date_idx
Primary Key: palm_buyers_pkey
Unique Key: palm_buyers_username
Constraint: "$1" ((sex = 'M'::bpchar) OR (sex = 'F'::bpchar))
Note that check constraint name now shown as well. (Makes it a lot easier
to test inheritance support in ADD/DROP constraint :) )
Attached is a docs change for psql.
Christopher Kings
Python) to support shared extension modules, I have learned that Guido
prefers the style of the attached patch to solve the above problem.
I feel that this solution is particularly appropriate in this case
because the following:
PglargeType
PgType
PgQueryType
are already being handled in the way that I am proposing for PgSourceType.
Jason Tishler
it does not support 64bit integers. AFAIK that's the default data type for
OIDs, so I am not surprised that this does not work. Use gcc instead.
BTW., 7.1 does not compile as is with gcc either, I believed the
required patches made it into the 7.1.1 release but obviously I missed
the deadline.
Since the ports mailing list does not seem to be archived I have attached
a copy of the patch (for 7.1 and 7.1.1).
I've just performed a build of a Watcom compiled version and found a couple
of bugs in the watcom specific part of that patch. Please use the attached
version instead.
Tegge, Bernd
to do that, but inconsistently.) Make bit type reject too short input,
too, per SQL. Since it no longer zero pads, 'zpbit*' has been renamed to
'bit*' in the source, hence initdb.
enables pltcl unknown support.
Also it adds substituting of tclsh with tclsh that was by configure in
pltcl_*mod scripts. For example, On freebsd, tclsh can be called
tclsh8.2 or
tclsh8.3 depending on installed version of Tcl.
After patching files
src/pl/tcl/modules/pltcl_listmod
src/pl/tcl/modules/pltcl_loadmod
src/pl/tcl/modules/pltcl_delmod
must be renamed(copied,repocopied) to
src/pl/tcl/modules/pltcl_listmod.in
src/pl/tcl/modules/pltcl_loadmod.in
src/pl/tcl/modules/pltcl_delmod.in
seva@sevasoft.kiev.ua
still looking at the best way to integrate Tom Vijlbrief's fixes
(insofar as they're still needed); would 7.2 be a suitable time for
incompatible API changes?
Jeroen
Changes:
(*) Introduced bool, true, false (replacing some int, 1, 0)
(*) Made some member functions const
(*) Documented GetIsNull()
(*) Marked DisplayTuples() and PrintTuples() as obsolescent; fixed possible
portability problem (assumed that NULL pointer equals all-zero bit pattern)
(*) PrintTuples(): renamed width parameter to fillAlign to conform with other
usage; fixed memory leak and compile issue w.r.t. field separator (should
also slightly improve performance)
(*) Fixed some minor compilation issues
(*) Moved "using namespace std;" out of headers, where they didn't belong; used
new (temporary) preprocessor macro PGSTD to do this
(*) Made ToString() static, removed unneeded memset(), made buffer size adapt
to sizeof(int)
(*) Made some constructors explicit
(*) Changed some const std::string & parameters to plain std::string
(*) Marked PgCursor::Cursor(std::string) as obsolescent (setter with same name
as getter--bad style)
(*) Renamed some paramaters previously named "string"
(*) Introduced size_type typedef for number of tuples in result set
(*) PgTransaction now supports re-opening after closing, and aborts if not
explicitly committed prior to destruction
J. T. Vermeulen
collected by ANALYZE. Also, add some modest amount of intelligence to
guesses that are used for varlena columns in the absence of any ANALYZE
statistics. The 'width' reported by EXPLAIN is finally something less
than totally bogus for varlena columns ... and, in consequence, hashjoin
estimating should be a little better ...
===================
In Notes:
Refer to CREATE FUNCTION for information on creating aggregate functions.
^^^^^^^^^^^^^^^^^^^
I assume it must read C function instead.
In Compatibility SQL/PSM:
SQL/PSM is a proposed standard.
We had that before: remove proposed.
drop_index.sgml:
================
<REFNAME>: Removes existing indexes from a database
as far as I can see index should be singular. The command description is
written as if only one index can be removed at a time. Interestingly
enough, in v7.0.2 it was in fact singular. Am I mistaken here?
drop_operator.sgml:
===================
In Outputs the arguments are referred to as type and type2, but the synopsis
and Inputs section these are left_type and right_type, respectively. Also,
oper is used in Outputs versus id in Inputs/Synopsis. In the translation I
follow the replaceables used in the Inputs/Synopsis part.
Frank Wegmann
===================
In Notes:
Refer to CREATE FUNCTION for information on creating aggregate functions.
^^^^^^^^^^^^^^^^^^^
I assume it must read C function instead.
Frank Wegmann
a separate statement (though it can still be invoked as part of VACUUM, too).
pg_statistic redesigned to be more flexible about what statistics are
stored. ANALYZE now collects a list of several of the most common values,
not just one, plus a histogram (not just the min and max values). Random
sampling is used to make the process reasonably fast even on very large
tables. The number of values and histogram bins collected is now
user-settable via an ALTER TABLE command.
There is more still to do; the new stats are not being used everywhere
they could be in the planner. But the remaining changes for this project
should be localized, and the behavior is already better than before.
A not-very-related change is that sorting now makes use of btree comparison
routines if it can find one, rather than invoking '<' twice.
being ratified as yet. This is certainly no longer true, it wasn't
even true in Q2/1998 when I did a little research for Date's book.
SQL/PSM had been published on 1996-12-15 as ISO/IEC 9075:4. So you
might want to update that section.
Frank Wegmann
adjustments. Note that many tables are being abused with *really* long
description columns. Should probably shrink those columns to be more
concise, and move some of the info to follow-on reference notes.
\keep (keep current paragraph together). This fixes most troubles with
reference pages marked up with <refentry> tags.
Use on reference.rtf, generated by "make reference.rtf".
more recent versions of the IBM C++ compiler (now called VisualAge C++).
The C++ part was previously broken (g++ and xlC), thus this is zero risk.
Only AIX specific parts are touched (1 Makefile.shlib line (link with $(COMPILER
) instead
of $(CC) and one shell script line (parameter -C to nm to not demangle C++ symbo
ls for
.exp file)).
I thus ask you to please apply this patch before release.
With or without this patch RC1 on AIX 4.3.2 RS6000 passes "gmake check" for both
the native
compiler vac.C 5.0.1 and gcc 2.95.2 :-)
Andreas
at the beginning and end of the input string, not the beginning and end
of "a line", since Postgres does not allow them to match at newline
characters in the data.
O_SYNC, or O_DSYNC (as available on a given platform). Add GUC parameter
to control sync method.
Also, add defense to XLogWrite to prevent it from going nuts if passed
a target write position that's past the end of the buffers so far filled
by XLogInsert.
* Store two past checkpoint locations, not just one, in pg_control.
On startup, we fall back to the older checkpoint if the newer one
is unreadable. Also, a physical copy of the newest checkpoint record
is kept in pg_control for possible use in disaster recovery (ie,
complete loss of pg_xlog). Also add a version number for pg_control
itself. Remove archdir from pg_control; it ought to be a GUC
parameter, not a special case (not that it's implemented yet anyway).
* Suppress successive checkpoint records when nothing has been entered
in the WAL log since the last one. This is not so much to avoid I/O
as to make it actually useful to keep track of the last two
checkpoints. If the things are right next to each other then there's
not a lot of redundancy gained...
* Change CRC scheme to a true 64-bit CRC, not a pair of 32-bit CRCs
on alternate bytes. Polynomial borrowed from ECMA DLT1 standard.
* Fix XLOG record length handling so that it will work at BLCKSZ = 32k.
* Change XID allocation to work more like OID allocation. (This is of
dubious necessity, but I think it's a good idea anyway.)
* Fix a number of minor bugs, such as off-by-one logic for XLOG file
wraparound at the 4 gig mark.
* Add documentation and clean up some coding infelicities; move file
format declarations out to include files where planned contrib
utilities can get at them.
* Checkpoint will now occur every CHECKPOINT_SEGMENTS log segments or
every CHECKPOINT_TIMEOUT seconds, whichever comes first. It is also
possible to force a checkpoint by sending SIGUSR1 to the postmaster
(undocumented feature...)
* Defend against kill -9 postmaster by storing shmem block's key and ID
in postmaster.pid lockfile, and checking at startup to ensure that no
processes are still connected to old shmem block (if it still exists).
* Switch backends to accept SIGQUIT rather than SIGUSR1 for emergency
stop, for symmetry with postmaster and xlog utilities. Clean up signal
handling in bootstrap.c so that xlog utilities launched by postmaster
will react to signals better.
* Standalone bootstrap now grabs lockfile in target directory, as added
insurance against running it in parallel with live postmaster.
not all of them attached properly in the post I made a few minutes
ago. Please disregard those earlier files. The diffs in the tar file
replace them.
Pierce Tyler
only if at least N other backends currently have open transactions. This
is not a great deal of intelligence about whether a delay might be
profitable ... but it beats no intelligence at all. Note that the default
COMMIT_DELAY is still zero --- this new code does nothing unless that
setting is changed.
Also, mark ENABLEFSYNC as a system-wide setting. It's no longer safe to
allow that to be set per-backend, since we may be relying on some other
backend's fsync to have synced the WAL log.
option of CREATE DATABASE. In pg_regress, create regression database
from template0 to ensure that any installation-local cruft in template1
will not mess up the tests.
HTML:
* make .html the default extension
* allow use of CSS stylesheet ("stylesheet.css", not included)
* make <set> TOC two levels deep
* put time of creation into meta header
Print:
* make print output justified by default
* footnotes at bottom of each page
* allow TeX to hyphenate
Chapter 4
String Operators
Table 4.7: Other String Functions
strpos is missing the result in the result column, it should be 2
Also to_ascii might need a result but maybe not.
Appendix A
In the Time Zone Table
Greenwich is spelled Greenwish
David Aldrich
are now separate files "postgres.h" and "postgres_fe.h", which are meant
to be the primary include files for backend .c files and frontend .c files
respectively. By default, only include files meant for frontend use are
installed into the installation include directory. There is a new make
target 'make install-all-headers' that adds the whole content of the
src/include tree to the installed fileset, for use by people who want to
develop server-side code without keeping the complete source tree on hand.
Cleaned up a whole lot of crufty and inconsistent header inclusions.
Add -l option to name log file. Set umask to 077.
Proper file descriptor redirection to allow postmaster to detach from
shell's process group.
Add -s option to turn off informational messages.
(sql490.htm), there is
"set of all k-tuples v1, v2, ... vk, such that v1 [isin] D1, v1 [isin] D1"
i assume it should be
"set of all k-tuples v1, v2, ... vk, such that v1 [isin] D1, v2 [isin] D2"
Divide by Zero
privkey.pem cert.pem.pw" if you just use "privkey.pem" in the following
openssl command (e.g. openssl rsa -in privkey.pem -out cert.pem".
But there is nothing wrong with it as it is now, as far as I can see.
//Magnus
* doc/FAQ_MSWIN: Update to be consistent with software -- mainly change
comment from lack of Cygwin UNIX domain socket support and to list of
current Cygwin UNIX domain socket issues.
* src/include/config.h.in: Enable UNIX domain sockets for Cygwin.
* src/include/port/win.h: Disable UNIX domain sockets for Cygwin b20.1.
* src/test/regress/pg_regress.sh: Use UNIX domain sockets for Cygwin
instead of TCP/IP.
Chapter 10. PL/pgSQL - SQL Procedural Language (c40914117.htm)
Statements
...
(resulting in a PL/pgSQL internal SELECT).
But there are cases where someone isn't interested int
-----------------------------------------(have to be)-->
But there are cases where someone isn't interested in
the functions result.
RAISE level format''
--(have to be)-->
RAISE level 'format'
find it ambiguous. I propose something along the lines of the
following patch to clarify it. Thanks.
(Alternatively, perhaps the code could maintain a count of nested
calls to SPI_connect/SPI_finish. But I didn't try to write that
patch.)
Ian Lance Taylor
and revert documentation to describe the existing INHERITS clause
instead, per recent discussion in pghackers. Also fix implementation
of SQL_inheritance SET variable: it is not cool to look at this var
during the initial parsing phase, only during parse_analyze(). See
recent bug report concerning misinterpretation of date constants just
after a SET TIMEZONE command. gram.y really has to be an invariant
transformation of the query string to a raw parsetree; anything that
can vary with time must be done during parse analysis.
Index: TODO
===================================================================
RCS file: /home/projects/pgsql/cvsroot/pgsql/doc/TODO,v
retrieving revision 1.311
diff -r1.311 TODO
3c3
< Last updated: Tue Jan 2 21:23:11 EST 2001
---
> Last updated: Wed Jan 3 01:56:41 EST 2001
10c10
< A dash(-) marks changes that will appear in the upcoming 7.1 release.
---
> A dash (-) marks changes that will appear in the upcoming 7.1 release.
23c23
< * -Creating index of TIMESTAMP & RELTIME fails, or rename to DATETIME(Thomas)
---
> * -Creating index of TIMESTAMP & RELTIME fails, or rename to DATETIME (Thomas)
35c35
< * -Views containing aggregates sometimes fail(Jan)
---
> * -Views containing aggregates sometimes fail (Jan)
37,38c37,38
< duplicates(inherit)
< * -Disallow LOCK on view(Mark Hollomon)
---
> duplicates (inherit)
> * -Disallow LOCK on view (Mark Hollomon)
58,60c58,60
< * -Add OUTER joins, left and right[outer](Tom, Thomas)
< * -Allow long tuples by chaining or auto-storing outside db (TOAST)(Jan)
< * Fix memory leak for expressions[memory](Tom?)
---
> * -Add OUTER joins, left and right[outer] (Tom, Thomas)
> * -Allow long tuples by chaining or auto-storing outside db (TOAST) (Jan)
> * Fix memory leak for expressions[memory] (Tom?)
70c70
< * Allow row re-use without vacuum(Vadim)
---
> * Allow row re-use without vacuum (Vadim)
74c74
< * More access control over who can create tables and use locks(Karel)
---
> * More access control over who can create tables and use locks (Karel)
92c92
< o -Fix large object mapping scheme, own typeid or reltype(Peter)
---
> o -Fix large object mapping scheme, own typeid or reltype (Peter)
97c97
< * Fix improper masking of some inet/cidr types [cidr]
---
> * -Fix improper masking of some inet/cidr types [cidr]
113c113
< * Get BIT type working
---
> * -Get BIT type working
119c119
< * Update macaddr manufacturer numbers, or remove the function macaddr_manuf()
---
> * -Update macaddr manufacturer numbers, or remove the function macaddr_manuf()
147c147
< * -Add ALTER TABLE ALTER COLUMN feature(Peter E)
---
> * -Add ALTER TABLE ALTER COLUMN feature (Peter E)
157c157
< * Auto-destroy sequence on DROP of table with SERIAL(Ryan)
---
> * Auto-destroy sequence on DROP of table with SERIAL (Ryan)
166a167
> * Allow INSERT INTO tab (col1, ..) VALUES (val1, ..), (val2, ..)
172d172
< * Allow INSERT INTO tab (col1, ..) VALUES (val1, ..), (val2, ..)
176c176
< * Make NULL's come out at the beginning or end depending on the
---
> * Make NULL's come out at the beginning or end depending on the
220c220
< * Certain indexes will not shrink, i.e. oid indexes with many inserts(Vadim)
---
> * Certain indexes will not shrink, i.e. oid indexes with many inserts (Vadim)
226c226
< with after-row images(Vadim) [logging](Vadim)
---
> with after-row images (Vadim) [logging]
232c232
< * -Redesign the function call interface to handle NULLs better[function](Tom)
---
> * -Redesign the function call interface to handle NULLs better[function] (Tom)
239c239
< * Encrpyt passwords in pg_shadow table using MD5(Vince)
---
> * Encrpyt passwords in pg_shadow table using MD5 (Vince)
298a299,300
> * Create a transaction processor to aid in persistent connections and
> connection pooling
307c309
< * Remove SET KSQO option now that OR processing is improved(Tom)
---
> * Remove SET KSQO option now that OR processing is improved (Tom)
Index: TODO
===================================================================
RCS file: /home/projects/pgsql/cvsroot/pgsql/doc/TODO,v
retrieving revision 1.310
diff -r1.310 TODO
3c3
< Last updated: Wed Dec 27 00:44:44 EST 2000
---
> Last updated: Tue Jan 2 21:23:11 EST 2001
310a311
> * Allow libedit to be used in place of libreadline
Index: TODO
===================================================================
RCS file: /home/projects/pgsql/cvsroot/pgsql/doc/TODO,v
retrieving revision 1.309
diff -r1.309 TODO
3c3
< Last updated: Sat Dec 23 09:48:47 EST 2000
---
> Last updated: Wed Dec 27 00:44:44 EST 2000
60a61,70
> * Add replication of distributed databases [replication]
> o automatic fallover
> o load balancing
> o master/slave replication
> o multi-master replication
> o partition data across servers
> o sample implementation in contrib/rserv
> o queries across databases or servers (two-phase commit)
> * Point-in-time data recovery using backup and write-ahead log
> * Allow row re-use without vacuum(Vadim)
112c122
< * Make file in/out interface to TOAST columns
---
> * Make binary/file in/out interface for TOAST columns
122a133
> * Automatically create rules on views so they are updateable, per SQL92
173c184
< * allow psql \d to show temporary table schema
---
> * allow psql \d to show temporary table structure
195d205
< * Add replication of distributed databases [replication]
200a211,212
> * Incremental backups
> * Allow SQL92 schemas
205d216
< * Allow row re-use without vacuum(Vadim)
229a241
> * Allow Java server-side programming
278a291
> * Automatically keep clustering on a table
329d341
< 5~
Index: TODO
===================================================================
RCS file: /home/projects/pgsql/cvsroot/pgsql/doc/TODO,v
retrieving revision 1.308
diff -r1.308 TODO
3c3
< Last updated: Thu Dec 21 14:45:00 EST 2000
---
> Last updated: Sat Dec 23 09:48:47 EST 2000
72a73
> * Remove unused files during database vacuum or postmaster startup
recommendation from Paul Vixie. Add a new abbrev() function to produce
abbreviated format as text. No forced initdb, but new function is not
available unless you do an initdb or add the pg_proc row manually.
Index: TODO
===================================================================
RCS file: /home/projects/pgsql/cvsroot/pgsql/doc/TODO,v
retrieving revision 1.307
diff -r1.307 TODO
3c3
< Last updated: Thu Dec 21 14:12:04 EST 2000
---
> Last updated: Thu Dec 21 14:45:00 EST 2000
32d31
< * Prevent BETWEEN from using duplicate nodes
Index: TODO
===================================================================
RCS file: /home/projects/pgsql/cvsroot/pgsql/doc/TODO,v
retrieving revision 1.306
diff -r1.306 TODO
3c3
< Last updated: Fri Dec 15 17:44:57 EST 2000
---
> Last updated: Thu Dec 21 14:12:04 EST 2000
31a32
> * Prevent BETWEEN from using duplicate nodes
Index: TODO
===================================================================
RCS file: /home/projects/pgsql/cvsroot/pgsql/doc/TODO,v
retrieving revision 1.305
diff -r1.305 TODO
3c3
< Last updated: Fri Dec 15 17:40:22 EST 2000
---
> Last updated: Fri Dec 15 17:44:57 EST 2000
312a313
> * Mark is Mark Hollomon <mhh@mindspring.com>
326a328
> 5~
Index: TODO
===================================================================
RCS file: /home/projects/pgsql/cvsroot/pgsql/doc/TODO,v
retrieving revision 1.304
diff -r1.304 TODO
3c3
< Last updated: Fri Dec 15 17:03:28 EST 2000
---
> Last updated: Fri Dec 15 17:40:22 EST 2000
318a319
> * Ross is Ross J. Reedstrom <reedstrm@wallace.ece.rice.edu>
Index: TODO
===================================================================
RCS file: /home/projects/pgsql/cvsroot/pgsql/doc/TODO,v
retrieving revision 1.303
diff -r1.303 TODO
3c3
< Last updated: Fri Dec 15 16:46:43 EST 2000
---
> Last updated: Fri Dec 15 17:03:28 EST 2000
319a320
> * Stephan is Stephan Szabo <sszabo@megazone23.bigpanda.com>
Index: TODO
===================================================================
RCS file: /home/projects/pgsql/cvsroot/pgsql/doc/TODO,v
retrieving revision 1.302
diff -r1.302 TODO
3c3
< Last updated: Tue Dec 12 23:01:53 EST 2000
---
> Last updated: Fri Dec 15 16:46:43 EST 2000
Index: TODO
===================================================================
RCS file: /home/projects/pgsql/cvsroot/pgsql/doc/TODO,v
retrieving revision 1.301
diff -r1.301 TODO
306d305
< * Bryan is Bryan Henderson<bryanh@giraffe.netgate.net>
308d306
< * David is David Hartwig <daveh@insightdist.com>
311c309,310
< * Hiroshi is Hiroshi Inoue<Inoue@tpf.co.jp>
---
> * Hiroshi is Hiroshi Inoue <Inoue@tpf.co.jp>
> * Karel is Karel Zak <zakkr@zf.jcu.cz>
314c313
< * Massimo Dal Zotto <dz@cs.unitn.it>
---
> * Massimo is Massimo Dal Zotto <dz@cs.unitn.it>
318c317
< * Philip Warner <pjw@rhyme.com.au>
---
> * Philip is Philip Warner <pjw@rhyme.com.au>
321d319
< * Stefan Simkovics <ssimkovi@rainbow.studorg.tuwien.ac.at>
326c324
< * Vadim is "Vadim B. Mikheev" <vadim4o@email.com>
---
> * Vadim is Vadim B. Mikheev <vadim4o@email.com>
Index: TODO
===================================================================
RCS file: /home/projects/pgsql/cvsroot/pgsql/doc/TODO,v
retrieving revision 1.300
diff -r1.300 TODO
3c3
< Last updated: Tue Dec 12 23:01:04 EST 2000
---
> Last updated: Tue Dec 12 23:01:53 EST 2000
21d20
< * test to show diffs for TODO changes
Index: TODO
===================================================================
RCS file: /home/projects/pgsql/cvsroot/pgsql/doc/TODO,v
retrieving revision 1.299
diff -r1.299 TODO
3c3
< Last updated: Tue Dec 12 15:27:50 EST 2000
---
> Last updated: Tue Dec 12 23:01:04 EST 2000
20a21
> * test to show diffs for TODO changes
the first paragraph:
As an example, say we wish to find all the records that
are in the temperature range of other records. In
effect, we need to compare the temp_lo and temp_hi
attributes of each EMP instance to the temp_lo and
temp_hi attributes of all other EMP instances.
I believe that EMP should read WEATHER, as the example query that
follows joins WEATHER to itself.
EMP is often used in Oracle examples.
Regards,
Graham
Other RULE cleanups
ISO-compliant UNION/INTERSECT/EXCEPT. Revise discussion of rule
rewriter to reflect new subselect-in-FROM implementation of views.
Miscellaneous other cleanups.
line 1324:
"left-hand" should be "right-hand"
BTW: new document looks very good!
And the new configure/build process seems much better then before!
Thanks!
Laser
value greater than one. The behavior this sought to disallow doesn't
seem any less confusing than the other behaviors of cached sequences.
Improve wording of some error messages, too.
Update documentation accordingly. Also add an explanation that
aborted transactions do not roll back their nextval() calls; this
seems to be a FAQ, so it ought to be mentioned here...
IPC key assignment will now work correctly even when multiple postmasters
are using same logical port number (which is possible given -k switch).
There is only one shared-mem segment per postmaster now, not 3.
Rip out broken code for non-TAS case in bufmgr and xlog, substitute a
complete S_LOCK emulation using semaphores in spin.c. TAS and non-TAS
logic is now exactly the same.
When deadlock is detected, "Deadlock detected" is now the elog(ERROR)
message, rather than a NOTICE that comes out before an unhelpful ERROR.
re-adopt these settings at every postmaster or standalone-backend startup.
This should fix problems with indexes becoming corrupt due to failure to
provide consistent locale environment for postmaster at all times. Also,
refuse to start up a non-locale-enabled compilation in a database originally
initdb'd with a non-C locale. Suppress LIKE index optimization if locale
is not "C" or "POSIX" (are there any other locales where it's safe?).
Issue NOTICE during initdb if selected locale disables LIKE optimization.
it fixing Y,YY,YYY,YYYY conversion, the docs and regress tests update
are included too.
During the patch testing I found small bug in miscadmin.h in
convertstr() declaration. Here it's fixed too.
Thanks
Karel
Make version.sgml the central place for updating version numbers in the
documentation. Document titles now contain the version number of the
release they belong to.
filelist.sgml is the central (and only) place to declare system entities
(i.e., sgml files). No longer a need to declare them in each document
header.
There is no longer any need to maintain duplicate chapter lists in
postgres.sgml and user/admin/etc.sgml, everything is build from the same
sources. Some parameter entities allow for different text to be included
when the integrated or a single doc set is generated, which eliminates the
problems that had caused this to fail in the past.
in pghackers list. Support for oldstyle internal functions is gone
(no longer needed, since conversion is complete) and pg_language entry
'internal' now implies newstyle call convention. pg_language entry
'newC' is gone; both old and newstyle dynamically loaded C functions
are now called language 'C'. A newstyle function must be identified
by an associated info routine. See src/backend/utils/fmgr/README.
maintained for each cache entry. A cache entry will not be freed until
the matching ReleaseSysCache call has been executed. This eliminates
worries about cache entries getting dropped while still in use. See
my posting to pg-hackers of even date for more info.
<entry>varchar(n)</entry>
<entry>(4+x) bytes</entry>
should be
<entry>varchar(n)</entry>
<entry>(4+n) bytes</entry>
or
<entry>varchar(x)</entry>
<entry>(4+x) bytes</entry>
Regards
Laser Henry
cloned, rather than always cloning template1. Modify initdb to generate
two identical databases rather than one, template0 and template1.
Connections to template0 are disallowed, so that it will always remain
in its virgin as-initdb'd state. pg_dumpall now dumps databases with
restore commands that say CREATE DATABASE foo WITH TEMPLATE = template0.
This allows proper behavior when there is user-added data in template1.
initdb forced!
adds the facility to set the program name used in syslog.
(this includes the other ones).
One gotcha, the parser doesn't like special characters in strings.
For example, i tried to use pg-test, and if failed the parse coming
from the postgresql.conf file.
I don't think it's a showstopper..
Larry Rosenman
hosting product, on both shared and dedicated machines. We currently
offer Oracle and MySQL, and it would be a nice middle-ground.
However, as shipped, PostgreSQL lacks the following features we need
that MySQL has:
1. The ability to listen only on a particular IP address. Each
hosting customer has their own IP address, on which all of their
servers (http, ftp, real media, etc.) run.
2. The ability to place the Unix-domain socket in a mode 700 directory.
This allows us to automatically create an empty database, with an
empty DBA password, for new or upgrading customers without having
to interactively set a DBA password and communicate it to (or from)
the customer. This in turn cuts down our install and upgrade times.
3. The ability to connect to the Unix-domain socket from within a
change-rooted environment. We run CGI programs chrooted to the
user's home directory, which is another reason why we need to be
able to specify where the Unix-domain socket is, instead of /tmp.
4. The ability to, if run as root, open a pid file in /var/run as
root, and then setuid to the desired user. (mysqld -u can almost
do this; I had to patch it, too).
The patch below fixes problem 1-3. I plan to address #4, also, but
haven't done so yet. These diffs are big enough that they should give
the PG development team something to think about in the meantime :-)
Also, I'm about to leave for 2 weeks' vacation, so I thought I'd get
out what I have, which works (for the problems it tackles), now.
With these changes, we can set up and run PostgreSQL with scripts the
same way we can with apache or proftpd or mysql.
In summary, this patch makes the following enhancements:
1. Adds an environment variable PGUNIXSOCKET, analogous to MYSQL_UNIX_PORT,
and command line options -k --unix-socket to the relevant programs.
2. Adds a -h option to postmaster to set the hostname or IP address to
listen on instead of the default INADDR_ANY.
3. Extends some library interfaces to support the above.
4. Fixes a few memory leaks in PQconnectdb().
The default behavior is unchanged from stock 7.0.2; if you don't use
any of these new features, they don't change the operation.
David J. MacKenzie
functions, per recent discussions on pghackers. For now, I have called
the verbose-display formatting function text(), but will reconsider if
enough people object.
initdb forced.
that installs into a different path than is configured.
With this applied both postmaster and the shared libs are location
independent
for AIX 4.2 and up.
Thanks
Andreas
kibitzing from Tom Lane. Large objects are now all stored in a single
system relation "pg_largeobject" --- no more xinv or xinx files, no more
relkind 'l'. This should offer substantial performance improvement for
large numbers of LOs, since there won't be directory bloat anymore.
It'll also fix problems like running out of locktable space when you
access thousands of LOs in one transaction.
Also clean up cruft in read/write routines. LOs with "holes" in them
(never-written byte ranges) now work just like Unix files with holes do:
a hole reads as zeroes but doesn't occupy storage space.
INITDB forced!
as well allow DROP multiple INDEX, RULE, TYPE as well. Add missing
CommandCounterIncrement to DROP loop, which could cause trouble otherwise
with multiple DROP of items affecting same catalog entries. Try to
bring a little consistency to various error messages using 'does not exist',
'nonexistent', etc --- I standardized on 'does not exist' since that's
what the vast majority of the existing uses seem to be.
time zones with embedded numerals (parsing to a meaninless "ZP 4"
instead).
Support "SAT" as an Australian time zone if USE_AUSTRALIAN_RULES
is defined.
Fix units in exposition on Julian calendar (from Lazer Henry I think...)
This patch forces the use of 'DROP VIEW' to destroy views.
It also changes the syntax of DROP VIEW to
DROP VIEW v1, v2, ...
to match the syntax of DROP TABLE.
Some error messages were changed so this patch also includes changes to the
appropriate expected/*.out files.
Doc changes for 'DROP TABLE" and 'DROP VIEW' are included.
--
Mark Hollomon
* doc/src/sgml/installation.sgml: ditto.
* src/test/regress/README: Regenerate.
* doc/src/sgml/docguide.sgml: Explain how it was done. Explain how
INSTALL and HISTORY are (now) generated.
* doc/src/sgml/Makefile: Implement HISTORY generation to be analoguous
to INSTALL.
I hope I didn't mess the SGML up too bad, but somebody should definitly
look that over. I tried to steal as much as I could from around :-)
This patch updates:
* Installation instructions (paragraph on how to compile with openssl)
* Documentation of pg_hba.conf (added "hostssl" record docs)
* Libpq documentation (added connection option, documentation of
PQgetssl() function)
* Add section on SSL to "Server Runtime Environment"
If you beleive any particular area needs more attention, please let me know.
//Magnus
have already modified "next_insert()" in 7.0-ecpglib. However
in the meaning of speed-up, the patch will be needed.
--
Regards,
SAKAIDA Masaaki -- Osaka, Japan
Update the installation instructions (formerly misnamed "FAQ"), add configure
checks for some headers rather than having users copy stubs manually (ugh!).
Use Autoconf check for exe extension. This also avoids inheriting the value
of $(X) from the environment.
- rename ichar() to chr() (discussed with Tom)
- add docs for oracle compatible routines:
btrim()
ascii()
chr()
repeat()
- fix bug with timezone in to_char()
- all to_char() variants return NULL instead textin("")
if it's needful.
The contrib/odbc is without changes and contains same routines as main
tree ... because I not sure how plans are Thomas with this :-)
Karel
---------------------------------------------------------------------------
This effectively one line patch should fix the fact that
foreign key definitions in create table were erroring if
a primary key was defined. I was using the columns
list to get the columns of the table for comparison, but
it got reused as a temporary list inside the primary key
stuff.
Stephan Szabo
There is still no effective difference but it will kick in once setuid
functions exist (not included here). Make old getpgusername() alias for
current_user.
DESTDIR=/else/where' and prepends the value of DESTDIR to the full
installation paths (e.g., /else/where/usr/local/pgsql/bin). This allows
users to install the package into a location different from the one that
was configured and hard-coded into various scripts, e.g., for creating
binary packages.
DESTDIR is in many cases preferrable over `make install
prefix=/else/where' because
a) `prefix' affects the path that is hard-coded into the files, which can
lead to a `make install prefix=xxx' (as done by the regression test
driver) corrupting the files in the source tree with wrong paths.
b) it doesn't work at all if a directory was overridden to not depend on
`prefix', e.g., --sysconfdir=/etc.
(Updating the regression test driver to use DESTDIR is a separate
undertaking.)
See also autoconf@gnu.org, From: Akim Demaille <akim@epita.fr>, Date: 08
Sep 2000 12:48:59 +0200, Message-ID:
<mv4em2vb1lw.fsf@nostromo.lrde.epita.fr>, Subject: Re: HTML format
documentation.
- full support for IW (ISO week) and vice versa conversion for IW too
(the to_char 'week' support is now complete and I hope correct).
Thomas, I use for IW code from timestamp.c, for this I create separate
function date2isoweek() from original 'case DTK_WEEK:' code in the
timestamp_part(). I mean will better use one code for same feature in
date_part() and in to_char(). The isoweek2date() is added to timestamp.c
too. Right?
IMHO in 7.1 will all to_char's features complete. It is cca 41 templates
for date/time and cca 21 for numbers.
* to_ascii:
- gcc, is it correct now? :-)
In the patch is documentation for to_char's IW and for to_ascii().
Karel
I hope I didn't mess the SGML up too bad, but somebody should definitly
look that over. I tried to steal as much as I could from around :-)
This patch updates:
* Installation instructions (paragraph on how to compile with openssl)
* Documentation of pg_hba.conf (added "hostssl" record docs)
* Libpq documentation (added connection option, documentation of
PQgetssl() function)
* Add section on SSL to "Server Runtime Environment"
If you beleive any particular area needs more attention, please let me know.
//Magnus
(rather than compile time). For libpq, even when Kerberos support is
compiled in, the default user name should still fall back to geteuid()
if it can't be determined via the Kerberos system.
A couple of fixes for string type configuration parameters, now that there
is one.
macros where appropriate (the code used to have several different ways
of doing that, including Int32, Int8, UInt8, ...). Remove last few
references to float32 and float64 typedefs --- it's all float4/float8
now. The typedefs themselves should probably stay in c.h for a release
or two, though, to avoid breaking user-written C functions.
that RAND_MAX applies to them, since it doesn't. Instead add a
config.h parameter MAX_RANDOM_VALUE. This is currently set at 2^31-1
but could be auto-configured if that ever proves necessary. Also fix
some outright bugs like calling srand() where srandom() is appropriate.
documentation. Therefore it's now installed by default. If there is no
documentation to be found (i.e., you are not using the distribution)
then this step is skipped.
Add --docdir option to configure to control installation directory.
There's now only one transition value and transition function.
NULL handling in aggregates is a lot cleaner. Also, use Numeric
accumulators instead of integer accumulators for sum/avg on integer
datatypes --- this avoids overflow at the cost of being a little slower.
Implement VARIANCE() and STDDEV() aggregates in the standard backend.
Also, enable new LIKE selectivity estimators by default. Unrelated
change, but as long as I had to force initdb anyway...
* Add option to build with OpenSSL out of the box. Fix thusly exposed
bit rot. Although it compiles now, getting this to do something
useful is left as an exercise.
* Fix Kerberos options to defer checking for required libraries until
all the other libraries are checked for.
* Change default odbcinst.ini and krb5.srvtab path to PREFIX/etc.
* Install work around for Autoconf's install-sh relative path anomaly.
Get rid of old INSTL_*_OPTS variables, now that we don't need them
anymore.
* Use `gunzip -c' instead of g?zcat. Reportedly broke on AIX.
* Look for only one of readline.h or readline/readline.h, not both.
* Make check for PS_STRINGS cacheable. Don't test for the header files
separately.
* Disable fcntl(F_SETLK) test on Linux.
* Substitute the standard GCC warnings set into CFLAGS in configure,
don't add it on in Makefile.global.
* Sweep through contrib tree to teach makefiles standard semantics.
... and in completely unrelated news:
* Make postmaster.opts arbitrary options-aware. I still think we need to
save the environment as well.
files to restrict the set of users that can connect to a database
but can still use the pg_shadow password. (You just leave off the
password field in the secondary file.)
Now the to_timestamp() support WW,W,J,SSSS,DDD conversion from strings and
the am/pm bug is fixed, the to_char() use week-of-year (WW) full compatible
with Oracle.
This patch update relevant regress-tests and docs too.
Karel
~
~
for details). It doesn't really do that much yet, since there are no
short-term memory contexts in the executor, but the infrastructure is
in place and long-term contexts are handled reasonably. A few long-
standing bugs have been fixed, such as 'VACUUM; anything' in a single
query string crashing. Also, out-of-memory is now considered a
recoverable ERROR, not FATAL.
Eliminate a large amount of crufty, now-dead code in and around
memory management.
Fix problem with holding off SIGTRAP, SIGSEGV, etc in postmaster and
backend startup.
option settings. Sort out SIGHUP vs BACKEND -- there is no total ordering
here, so make explicit checks. Add comments explaining all of this.
Removed permissions check on SHOW command.
Add examine_subclass to the game, rename to SQL_inheritance to fit the
official data model better. Adjust documentation.
Standalone backend needs to reset all options before it starts. To
facilitate that, have IsUnderPostmaster be set by the postmaster itself,
don't wait for the magic -p switch.
Also make sure that all environment variables and argv's survive
init_ps_display(). Use strdup where necessary.
Have initdb make configuration files (postgresql.conf, pg_hba.conf) mode
0600 -- having configuration files is no fun if you can't edit them.
> patches are not lost...
Aggregate doc patches:
The patches are attached. Be great if you could check them over to make
sure all relevant content (and markup) is there...
Isaac Wilcox
entries now for int8 and network hash indexes. int24_ops and int42_ops
are gone. pg_opclass no longer contains multiple entries claiming to be
the default opclass for the same datatype. opr_sanity regress test
extended to catch errors like these in the future.
reference page to new configuration system. Big update to administrator's
guide, chapters Runtime environment, Client authentication, and User
management, the latter two were part of the old Security chapter.
postgres build and use unixODBC (http://www.unixodbc.org)
This patch was applied against the postgresql-7.0beta1 build
Any problems let me know.
Nick Gorham
