The previous test order had the effect that if something was wrong
with the identity functionality, the create_table_like test would
likely fail or crash first, which is confusing. Reorder so that the
identity test comes before create_table_like.
This reverts commits d204ef6377,
83454e3c2b and a few more commits thereafter
(complete list at the end) related to MERGE feature.
While the feature was fully functional, with sufficient test coverage and
necessary documentation, it was felt that some parts of the executor and
parse-analyzer can use a different design and it wasn't possible to do that in
the available time. So it was decided to revert the patch for PG11 and retry
again in the future.
Thanks again to all reviewers and bug reporters.
List of commits reverted, in reverse chronological order:
f1464c5380 Improve parse representation for MERGE
ddb4158579 MERGE syntax diagram correction
530e69e59b Allow cpluspluscheck to pass by renaming variable
01b88b4df5 MERGE minor errata
3af7b2b0d4 MERGE fix variable warning in non-assert builds
a5d86181ec MERGE INSERT allows only one VALUES clause
4b2d44031f MERGE post-commit review
4923550c20 Tab completion for MERGE
aa3faa3c7a WITH support in MERGE
83454e3c2b New files for MERGE
d204ef6377 MERGE SQL Command following SQL:2016
Author: Pavan Deolasee
Reviewed-by: Michael Paquier
MERGE performs actions that modify rows in the target table
using a source table or query. MERGE provides a single SQL
statement that can conditionally INSERT/UPDATE/DELETE rows
a task that would other require multiple PL statements.
e.g.
MERGE INTO target AS t
USING source AS s
ON t.tid = s.sid
WHEN MATCHED AND t.balance > s.delta THEN
UPDATE SET balance = t.balance - s.delta
WHEN MATCHED THEN
DELETE
WHEN NOT MATCHED AND s.delta > 0 THEN
INSERT VALUES (s.sid, s.delta)
WHEN NOT MATCHED THEN
DO NOTHING;
MERGE works with regular and partitioned tables, including
column and row security enforcement, as well as support for
row, statement and transition triggers.
MERGE is optimized for OLTP and is parameterizable, though
also useful for large scale ETL/ELT. MERGE is not intended
to be used in preference to existing single SQL commands
for INSERT, UPDATE or DELETE since there is some overhead.
MERGE can be used statically from PL/pgSQL.
MERGE does not yet support inheritance, write rules,
RETURNING clauses, updatable views or foreign tables.
MERGE follows SQL Standard per the most recent SQL:2016.
Includes full tests and documentation, including full
isolation tests to demonstrate the concurrent behavior.
This version written from scratch in 2017 by Simon Riggs,
using docs and tests originally written in 2009. Later work
from Pavan Deolasee has been both complex and deep, leaving
the lead author credit now in his hands.
Extensive discussion of concurrency from Peter Geoghegan,
with thanks for the time and effort contributed.
Various issues reported via sqlsmith by Andreas Seltenreich
Authors: Pavan Deolasee, Simon Riggs
Reviewer: Peter Geoghegan, Amit Langote, Tomas Vondra, Simon Riggs
Discussion:
https://postgr.es/m/CANP8+jKitBSrB7oTgT9CY2i1ObfOt36z0XMraQc+Xrz8QB0nXA@mail.gmail.comhttps://postgr.es/m/CAH2-WzkJdBuxj9PO=2QaO9-3h3xGbQPZ34kJH=HukRekwM-GZg@mail.gmail.com
Since these names are global, using the same ones in different regression
tests creates a hazard of test failures if any two such scripts run
concurrently. Let's establish a policy of not doing that. In the cases
where a conflict existed, I chose to rename both sides: in principle one
script or the other could've been left in possession of the common name,
but that seems to just invite more trouble of the same sort.
There are a number of places where scripts are using names that seem
unduly generic, but in the absence of actual conflicts I left them alone.
In addition, fix insert.sql's use of "someone_else" as a role name.
That's a flat out violation of longstanding project policy, so back-patch
that change to v10 where the usage appeared. The rest of this is just
future-proofing, as no two of these scripts are actually run concurrently
in the existing parallel_schedule.
Conflicts of schema-qualified names also exist, but will be dealt with
separately.
Discussion: https://postgr.es/m/4627.1521070268@sss.pgh.pa.us
Investigation of 2d2d06b7e2 revealed that
identity values were not applied in some further cases, including
logical replication subscribers, VALUES RTEs, and ALTER TABLE ... ADD
COLUMN. To fix all that, apply the identity column expression in
build_column_default() instead of repeating the same logic at each call
site.
For ALTER TABLE ... ADD COLUMN ... IDENTITY, the previous coding
completely ignored that existing rows for the new column should have
values filled in from the identity sequence. The coding using
build_column_default() fails for this because the sequence ownership
isn't registered until after ALTER TABLE, and we can't do it before
because we don't have the column in the catalog yet. So we specially
remember in ColumnDef the sequence name that we decided on and build a
custom NextValueExpr using that.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Those cases currently crash and supporting them is more work then
originally thought, so we'll just prohibit these scenarios for now.
Author: Michael Paquier <michael.paquier@gmail.com>
Reviewed-by: Amit Langote <Langote_Amit_f8@lab.ntt.co.jp>
Reported-by: Мансур Галиев <gomer94@yandex.ru>
Bug: #14866
A COPY into a table should apply identity sequence values just like it
does for ordinary defaults. This was previously forgotten, leading to
null values being inserted, which in turn would fail because identity
columns have not-null constraints.
Author: Michael Paquier <michael.paquier@gmail.com>
Reported-by: Steven Winfield <steven.winfield@cantabcapital.com>
Bug: #14952
For \d sequencename, the psql code just did SELECT * FROM sequencename
to get the information to display, but this does not contain much
interesting information anymore in PostgreSQL 10, because the metadata
has been moved to a separate system catalog.
This patch creates a newly designed sequence display that is not merely
an extension of the general relation/table display as it was previously.
Example:
PostgreSQL 9.6:
=> \d foobar
Sequence "public.foobar"
Column | Type | Value
---------------+---------+---------------------
sequence_name | name | foobar
last_value | bigint | 1
start_value | bigint | 1
increment_by | bigint | 1
max_value | bigint | 9223372036854775807
min_value | bigint | 1
cache_value | bigint | 1
log_cnt | bigint | 0
is_cycled | boolean | f
is_called | boolean | f
PostgreSQL 10 before this change:
=> \d foobar
Sequence "public.foobar"
Column | Type | Value
------------+---------+-------
last_value | bigint | 1
log_cnt | bigint | 0
is_called | boolean | f
New:
=> \d foobar
Sequence "public.foobar"
Type | Start | Minimum | Maximum | Increment | Cycles? | Cache
--------+-------+---------+---------------------+-----------+---------+-------
bigint | 1 | 1 | 9223372036854775807 | 1 | no | 1
Reviewed-by: Fabien COELHO <coelho@cri.ensmp.fr>
This is the SQL standard-conforming variant of PostgreSQL's serial
columns. It fixes a few usability issues that serial columns have:
- CREATE TABLE / LIKE copies default but refers to same sequence
- cannot add/drop serialness with ALTER TABLE
- dropping default does not drop sequence
- need to grant separate privileges to sequence
- other slight weirdnesses because serial is some kind of special macro
Reviewed-by: Vitaly Burovoy <vitaly.burovoy@gmail.com>
