Commit e5da0fe3c2 introduced catalog entries for not-null constraints
on domains; but because commit b0e96f3119 (the original work for
catalogued not-null constraints on tables) forgot to teach pg_dump to
process the comments for them, this one also forgot. Add that now.
We also need to teach repairDependencyLoop() about the new type of
constraints being possible for domains.
Backpatch-through: 17
Co-authored-by: jian he <jian.universality@gmail.com>
Co-authored-by: Álvaro Herrera <alvherre@kurilemu.de>
Reported-by: jian he <jian.universality@gmail.com>
Discussion: https://postgr.es/m/CACJufxF-0bqVR=j4jonS6N2Ka6hHUpFyu3_3TWKNhOW_4yFSSg@mail.gmail.com
We skip dumping constraints together with domains if they are invalid
('separate') so that they appear after data -- but their comments were
dumped together with the domain definition, which in effect leads to the
comment being dumped when the constraint does not yet exist. Delay
them in the same way.
Oversight in 7eca575d1c28; backpatch all the way back.
Author: jian he <jian.universality@gmail.com>
Discussion: https://postgr.es/m/CACJufxF_C2pe6J_+nPr6C5jf5rQnbYP8XOKr4HM8yHZtp2aQqQ@mail.gmail.com
This adjusts the wording to match the changes in commits
5987553fde, a233a603ba, and pgweb commit 2d764dbc08.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/aHVo791guQR6uqwT%40nathan
Backpatch-through: 13
Previously, the check_hook functions for max_slot_wal_keep_size and
idle_replication_slot_timeout would incorrectly raise an ERROR for values
set in postgresql.conf during upgrade, even though those values were not
actively used in the upgrade process.
To prevent logical slot invalidation during upgrade, we used to set
special values for these GUCs. Now, instead of relying on those values, we
directly prevent WAL removal and logical slot invalidation caused by
max_slot_wal_keep_size and idle_replication_slot_timeout.
Note: PostgreSQL 17 does not include the idle_replication_slot_timeout
GUC, so related changes were not backported.
BUG #18979
Reported-by: jorsol <jorsol@gmail.com>
Author: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed by: vignesh C <vignesh21@gmail.com>
Reviewed by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Backpatch-through: 17, where it was introduced
Discussion: https://postgr.es/m/219561.1751826409@sss.pgh.pa.us
Discussion: https://postgr.es/m/18979-a1b7fdbb7cd181c6@postgresql.org
Commit a45c78e328 moved large object metadata from SECTION_PRE_DATA
to SECTION_DATA but neglected to move PRIO_LARGE_OBJECT in
dbObjectTypePriorities accordingly. While this hasn't produced any
known live bugs, it causes problems for a proposed patch that
optimizes upgrades with many large objects. Fixing the priority
might also make the topological sort step marginally faster by
reducing the number of ordering violations that have to be fixed.
Reviewed-by: Nitin Motiani <nitinmotiani@google.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/aBkQLSkx1zUJ-LwJ%40nathan
Discussion: https://postgr.es/m/aG_5DBCjdDX6KAoD%40nathan
Backpatch-through: 17
Commit c273d9d8ce reworked tab-completion of COPY and \copy in psql
and added support for completing options within WITH clauses. However,
the same COPY options were suggested for both COPY TO and COPY FROM
commands, even though some options are only valid for one or the
other.
This commit separates the COPY options for COPY FROM and COPY TO
commands to provide more accurate auto-completion suggestions.
Back-patch to v14 where tab-completion for COPY and \copy options
within WITH clauses was first supported.
Author: Atsushi Torikoshi <torikoshia@oss.nttdata.com>
Reviewed-by: Yugo Nagata <nagata@sraoss.co.jp>
Discussion: https://postgr.es/m/079e7a2c801f252ae8d522b772790ed7@oss.nttdata.com
Backpatch-through: 14
With tables defined like this,
CREATE TABLE ip (id int PRIMARY KEY);
CREATE TABLE ic (id int) INHERITS (ip);
ALTER TABLE ic ALTER id DROP NOT NULL;
pg_upgrade fails during the schema restore phase due to this error:
ERROR: column "id" in child table must be marked NOT NULL
This can only be fixed by marking the child column as NOT NULL before
the upgrade, which could take an arbitrary amount of time (because ic's
data must be scanned). Have pg_upgrade's check mode warn if that
condition is found, so that users know what to adjust before running the
upgrade for real.
Author: Ali Akbar <the.apaan@gmail.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Backpatch-through: 13
Discussion: https://postgr.es/m/CACQjQLoMsE+1pyLe98pi0KvPG2jQQ94LWJ+PTiLgVRK4B=i_jg@mail.gmail.com
When decompressing some input data, the calculation for the initial
starting point and the initial size were incorrect, potentially leading
to failures when decompressing contents with LZ4. These initialization
points are fixed in this commit, bringing the logic closer to what
exists for gzip and zstd.
The contents of the compressed data is clear (for example backups taken
with LZ4 can still be decompressed with a "lz4" command), only the
decompression part reading the input data was impacted by this issue.
This code path impacts pg_basebackup and pg_verifybackup, which can use
the LZ4 decompression routines with an archive streamer, or any tools
that try to use the archive streamers in src/fe_utils/.
The issue is easier to reproduce with files that have a low-compression
rate, like ones filled with random data, for a size of at least 512kB,
but this could happen with anything as long as it is stored in a data
folder. Some tests are added based on this idea, with a file filled
with random bytes grabbed from the backend, written at the root of the
data folder. This is proving good enough to reproduce the original
problem.
Author: Mikhail Gribkov <youzhick@gmail.com>
Discussion: https://postgr.es/m/CAMEv5_uQS1Hg6KCaEP2JkrTBbZ-nXQhxomWrhYQvbdzR-zy-wA@mail.gmail.com
Backpatch-through: 15
pg_restore failed to restore large objects (blobs) out of
directory-format dumps made by versions before PG v12.
That's because, due to a bug fixed in commit 548e50976, those
old versions put the wrong filename into the BLOBS TOC entry.
Said bug was harmless before v17, because we ignored the
incorrect filename field --- but commit a45c78e32 assumed it
would be correct.
Reported-by: Pavel Stehule <pavel.stehule@gmail.com>
Author: Pavel Stehule <pavel.stehule@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAFj8pRCrZ=_e1Rv1N+6vDaH+6gf=9A2mE2J4RvnvKA1bLiXvXA@mail.gmail.com
Backpatch-through: 17
We'd try to drop the partitions of a partitioned index separately,
which is disallowed by the backend, leading to an error during
restore. While the error is harmless, it causes problems if you
try to use --single-transaction mode.
Fortunately, there seems no need to do a DROP at all, since the
partition will go away silently when we drop either the parent index
or the partition's table. So just make the DROP conditional on not
being a partition.
Reported-by: jian he <jian.universality@gmail.com>
Author: jian he <jian.universality@gmail.com>
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CACJufxF0QSdkjFKF4di-JGWN6CSdQYEAhGPmQJJCdkSZtd=oLg@mail.gmail.com
Backpatch-through: 13
The code comment for parse_oid accidentally used the wrong parameter
when referring to the location of the last backup. Also, while there,
improve sentence wording by removing a superfluous word.
Backpatch to v17 where pg_combinebackup was addedd
Author: Amul Sul <sulamul@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/CAAJ_b95ecWgzcS4K3Dx0E_Yp-SLwK5JBasFgioKMSjhQLw9xvg@mail.gmail.com
Backpatch-through: 17
47f99a407d introduced a parallel index-level REINDEX. The code was written
assuming that running run_reindex_command() with 'async == true' can schedule
a number of queries for a connection. That's not true, and the second query
sent using run_reindex_command() will wait for the completion of the previous
one.
This commit fixes that by putting REINDEX commands for the same table into a
single query.
Also, this commit removes the 'async' argument from run_reindex_command(),
as only its call always passes 'async == true'.
Reported-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/202503071820.j25zn3lo4hvn%40alvherre.pgsql
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Backpatch-through: 17
The function in charge of freeing the memory from a result created by
PQescapeIdentifier() has to be PQfreemem(), to ensure that both
allocation and free come from libpq.
One spot in pg_upgrade was not respecting that for pg_database's
datlocale (daticulocale in v16) when the collation provider is libc (aka
datlocale/daticulocale is NULL) with an allocation done using
pg_strdup() and a free with PQfreemem(). The code is changed to always
use PQescapeLiteral() when processing the input.
Oversight in 9637badd9f. This commit is similar to 48e4ae9a07 and
5b94e27534.
Author: Michael Paquier <michael@paquier.xyz>
Co-authored-by: Ranier Vilela <ranier.vf@gmail.com>
Discussion: https://postgr.es/m/Z601RQxTmIUohdkV@paquier.xyz
Backpatch-through: 16
There is a race condition between "GRANT role" and "DROP ROLE",
which allows GRANT to install pg_auth_members entries that refer to
dropped roles. (Commit 6566133c5 prevented that for the grantor
field, but not for the granted or grantee roles.) We'll soon fix
that, at least in HEAD, but pg_dumpall needs to cope with the
situation in case of pre-existing inconsistency. As pg_dumpall
stands, it will emit invalid commands like 'GRANT foo TO ""',
which causes pg_upgrade to fail. Fix it to emit warnings and skip
those GRANTs, instead.
There was some discussion of removing the problem by changing
dumpRoleMembership's query to use JOIN not LEFT JOIN, but that
would result in silently ignoring such entries. It seems better
to produce a warning.
Pre-v16 branches already coped with dangling grantor OIDs by simply
omitting the GRANTED BY clause. I left that behavior as-is, although
it's somewhat inconsistent with the behavior of later branches.
Reported-by: Virender Singla <virender.cse@gmail.com>
Discussion: https://postgr.es/m/CAM6Zo8woa62ZFHtMKox6a4jb8qQ=w87R2L0K8347iE-juQL2EA@mail.gmail.com
Backpatch-through: 13
The correct function documented to free the memory allocated for the
result returned by PQescapeIdentifier() and PQescapeLiteral() is
PQfreemem(). pg_createsubscriber.c relied on pg_free() instead, which
is not incorrect as both do a free() internally, but inconsistent with
the documentation.
While on it, this commit fixes a small memory leak introduced by
4867f8a555, as the code of pg_createsubscriber makes this effort.
Author: Ranier Vilela
Reviewed-by: Euler Taveira
Discussion: https://postgr.es/m/CAEudQAp=AW5dJXrGLbC_aZg_9nOo=42W7uLDRONFQE-gcgnkgQ@mail.gmail.com
Backpatch-through: 17
This commit adds fmtIdEnc() and fmtQualifiedIdEnc(), which allow to specify
the encoding as an explicit argument. Additionally setFmtEncoding() is
provided, which defines the encoding when no explicit encoding is provided, to
avoid breaking all code using fmtId().
All users of fmtId()/fmtQualifiedId() are either converted to the explicit
version or a call to setFmtEncoding() has been added.
This commit does not yet utilize the now well-defined encoding, that will
happen in a subsequent commit.
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Backpatch-through: 13
Security: CVE-2025-1094
Commit af35fe501 caused "pgbench -i" to emit a '\r' character
for each data row loaded (when stderr is a terminal).
That's effectively invisible on-screen, but it causes the
connected terminal program to consume a lot of cycles.
It's even worse if you're connected over ssh, as the data
then has to pass through the ssh tunnel.
Simplest fix is to move the added logic inside the if-tests
that check whether to print a progress line. We could do
it another way that avoids duplicating these few lines,
but on the whole this seems the most transparent way to
write it.
Like the previous commit, back-patch to all supported versions.
Reported-by: Andres Freund <andres@anarazel.de>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Discussion: https://postgr.es/m/4k4drkh7bcmdezq6zbkhp25mnrzpswqi2o75d5uv2eeg3aq6q7@b7kqdmzzwzgb
Backpatch-through: 13
Protect against malformed timestamps. Also protect against negative WalSegSz
as it triggers division by zero:
((0x100000000UL) / (WalSegSz)) can turn into zero in
XLogFileName(xlogfilename, ControlFile->checkPointCopy.ThisTimeLineID,
segno, WalSegSz);
because if WalSegSz is -1 then by arithmetic rules in C we get
0x100000000UL / 0xFFFFFFFFFFFFFFFFUL == 0.
Author: Ilyasov Ian <ianilyasov@outlook.com>
Author: Anton Voloshin <a.voloshin@postgrespro.ru>
Backpatch-through: 13
A few of the version checks in vacuum_one_database() do not call
PQfinish() before exiting. This precedent was unintentionally
established in commit 00d1e88d36, and while it's probably not too
problematic, it seems better to properly close the connection.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/Z6JAwqN1I8ljTuXp%40nathan
Backpatch-through: 13
When running on Windows, canonicalize_path() converts '\' to '/'
to prevent confusing the Windows command processor. It was
doing that in a non-encoding-aware fashion; but in SJIS there
are valid two-byte characters whose second byte matches '\'.
So encoding corruption ensues if such a character is used in
the path.
We can fairly easily fix this if we know which encoding is
in use, but a lot of our utilities don't have much of a clue
about that. After some discussion we decided we'd settle for
fixing this only in psql, and assuming that its value of
client_encoding matches what the user is typing.
It seems hopeless to get the server to deal with the problematic
characters in database path names, so we'll just declare that
case to be unsupported. That means nothing need be done in
the server, nor in utility programs whose only contact with
file path names is for database paths. But psql frequently
deals with client-side file paths, so it'd be good if it
didn't mess those up.
Bug: #18735
Reported-by: Koichi Suzuki <koichi.suzuki@enterprisedb.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Koichi Suzuki <koichi.suzuki@enterprisedb.com>
Discussion: https://postgr.es/m/18735-4acdb3998bb9f2b1@postgresql.org
Backpatch-through: 13
walmethods.c used off_t to navigate around a pg_wal.tar file that could
exceed 2GB, which doesn't work on Windows and would fail with misleading
errors. Use pgoff_t instead.
Back-patch to all supported branches.
Author: Davinder Singh <davinder.singh@enterprisedb.com>
Reported-by: Jakub Wartak <jakub.wartak@enterprisedb.com>
Discussion: https://postgr.es/m/CAKZiRmyM4YnokK6Oenw5JKwAQ3rhP0YTz2T-tiw5dAQjGRXE3Q%40mail.gmail.com
These two platforms have a remarkably tight default limit on the
number of SysV semaphores in the system: SEMMNS is only 60
out-of-the-box. Unless manual action is taken to raise that,
we'll only be able to allocate 3 sets of 16 usable semaphores
each, leading to initdb setting max_connections to just 20.
That's problematic because the core regression tests expect
to be able to launch 20 concurrent sessions, leaving us with
no headroom. This seems to be the cause of intermittent
buildfarm failures on some machines.
While there's no getting around the fact that you'd better raise
SEMMNS for production use on these platforms, it does seem desirable
for "make check" to pass reliably without that. We can make that
happen, at least for awhile longer, with two small changes:
* Change sysv_sema.c's SEMAS_PER_SET to 19, so that we can eat up
all of the available semas not just most of them.
* Change initdb to make the smallest max_connections value it will
consider be 25 not 20.
This is a back-patch of recent HEAD commit 38da05346 into v17.
The motivation for doing this now is that an upcoming bug-fix
patch will give the new-in-17 slotsync worker process its own
reserved PGPROC and hence also semaphore. With that patch but
without this change, v17 would fail to start at all under the
default SEMMNS on these platforms.
Discussion: https://postgr.es/m/db2773a2-aca0-43d0-99c1-060efcd9954e@gmail.com
Discussion: https://postgr.es/m/1808397.1735156190@sss.pgh.pa.us
The test was creating both the dumps to compare from the same database
on the same node, so it would never detect any mismatches when comparing
the logical dumps of the two servers.
Fixing this issue has revealed that there is a difference in the dumps:
the tablespaces paths are different. This commit uses compare_text()
with a custom comparison function to erase the difference (slightly
tweaked to be able to work with WIN32 and non-WIN32 paths). This way,
the non-relevant parts of the tablespace path are ignored from the check
with the basic structure of the query string still compared.
Author: Dagfinn Ilmari Mannsåker
Discussion: https://postgr.es/m/87h67653ns.fsf@wibble.ilmari.org
Backpatch-through: 17
An \if command appearing within a false (not-to-be-executed) \if
branch was incorrectly treated the same as \elif. This could allow
statements within the inner \if to be executed when they should
not be. Also the missing inner \if stack entry would result in an
assertion failure (in assert-enabled builds) when the final \endif
is reached.
Report and patch by Michail Nikolaev. Back-patch to all
supported branches.
Discussion: https://postgr.es/m/CANtu0oiA1ke=SP6tauhNqkUdv5QFsJtS1p=aOOf_iU+EhyKkjQ@mail.gmail.com
If an owned sequence is considered interesting, force its owning
table to be marked interesting too. This ensures, in particular,
that we'll fetch the owning table's column names so we have the
data needed for ALTER TABLE ... ADD GENERATED. Previously there were
edge cases where pg_dump could get SIGSEGV due to not having filled in
the column names. (The known case is where the owning table has been
made part of an extension while its identity sequence is not a member;
but there may be others.)
Also, if it's an identity sequence, force its dumped-components mask
to exactly match the owning table: dump definition only if we're
dumping the table's definition, dump data only if we're dumping the
table's data, etc. This generalizes the code introduced in commit
b965f2617 that set the sequence's dump mask to NONE if the owning
table's mask is NONE. That's insufficient to prevent failures,
because for example the table's mask might only request dumping ACLs,
which would lead us to still emit ALTER TABLE ADD GENERATED even
though we didn't create the table. It seems better to treat an
identity sequence as though it were an inseparable aspect of the
table, matching the treatment used in the backend's dependency logic.
Perhaps this policy needs additional refinement, but let's wait to
see some field use-cases before changing it further.
While here, add a comment in pg_dump.h warning against writing tests
like "if (dobj->dump == DUMP_COMPONENT_NONE)", which was a bug in this
case. There is one other example in getPublicationNamespaces, which
if it's not a bug is at least remarkably unclear and under-documented.
Changing that requires a separate discussion, however.
Per report from Artur Zakirov. Back-patch to all supported branches.
Discussion: https://postgr.es/m/CAKNkYnwXFBf136=u9UqUxFUVagevLQJ=zGd5BsLhCsatDvQsKQ@mail.gmail.com
On failure, the pg_upgrade log files are automatically appended to the
test log file, but the information reported was inconsistent.
A header, with the log file name, was reported with note(), while the
log contents and a footer used print(), making it harder to diagnose
failures when these are split into console output and test log file
because the pg_upgrade log file path in the header may not be included
in the test log file.
The output is now consolidated so as the header uses print() rather than
note(). An extra note() is added to inform that the contents of a
pg_upgrade log file are appended to the test log file.
The diffs from the regression test suite and dump files all use print()
to show their contents on failure.
Author: Joel Jacobson
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/49f7e64a-b9be-4a90-a9fe-210a7740405e@app.fastmail.com
Backpatch-through: 15
During pgbench's table initialization, progress updates could display
leftover characters from the previous message if the new message
was shorter. This commit resolves the issue by appending spaces to
the current message to fully overwrite any remaining characters from
the previous line.
Back-patch to all the supported versions.
Author: Yushi Ogiwara, Tatsuo Ishii, Fujii Masao
Reviewed-by: Tatsuo Ishii, Fujii Masao
Discussion: https://postgr.es/m/9a9b8b95b6a709877ae48ad5b0c59bb9@oss.nttdata.com
When using a pipeline, a transaction starts from the first command and
is committed with a Sync message or when the pipeline ends.
Functions like IsInTransactionBlock() or PreventInTransactionBlock()
were already able to understand a pipeline as being in a transaction
block, but it was not the case of CheckTransactionBlock(). This
function is called for example to generate a WARNING for SET LOCAL,
complaining that it is used outside of a transaction block.
The current state of the code caused multiple problems, like:
- SET LOCAL executed at any stage of a pipeline issued a WARNING, even
if the command was at least second in line where the pipeline is in a
transaction state.
- LOCK TABLE failed when invoked at any step of a pipeline, even if it
should be able to work within a transaction block.
The pipeline protocol assumes that the first command of a pipeline is
not part of a transaction block, and that any follow-up commands is
considered as within a transaction block.
This commit changes the backend so as an implicit transaction block is
started each time the first Execute message of a pipeline has finished
processing, with this implicit transaction block ended once a sync is
processed. The checks based on XACT_FLAGS_PIPELINING in the routines
checking if we are in a transaction block are not necessary: it is
enough to rely on the existing ones.
Some tests are added to pgbench, that can be backpatched down to v17
when \syncpipeline is involved and down to v14 where \startpipeline and
\endpipeline are available. This is unfortunately limited regarding the
error patterns that can be checked, but it provides coverage for various
pipeline combinations to check if these succeed or fail. These tests
are able to capture the case of SET LOCAL's WARNING. The author has
proposed a different feature to improve the coverage by adding similar
meta-commands to psql where error messages could be checked, something
more useful for the cases where commands cannot be used in transaction
blocks, like REINDEX CONCURRENTLY or VACUUM. This is considered as
future work for v18~.
Author: Anthonin Bonnefoy
Reviewed-by: Jelte Fennema-Nio, Michael Paquier
Discussion: https://postgr.es/m/CAO6_XqrWO8uNBQrSu5r6jh+vTGi5Oiyk4y8yXDORdE2jbzw8xw@mail.gmail.com
Backpatch-through: 13
Most came in during the 17 cycle, so backpatch there. Some
(particularly reorderbuffer.h) are very old, but backpatching doesn't
seem useful.
Like commits c9d2977519, c4f113e8fe.
It failed to set the archive_command as it desired because of a syntax
problem. Oversight in commit 90bcc7c2db.
This bug doesn't cause the test to fail, because the test only checks
pg_rewind's output messages, not the actual outcome (and the outcome in
both cases is that the file is kept, not deleted). But in either case
the message about the file being kept is there, so it's hard to get
excited about doing much more.
Reported-by: Antonin Houska <ah@cybertec.at>
Author: Alexander Kukushkin <cyberdemn@gmail.com>
Discussion: https://postgr.es/m/7822.1732167825@antos
Previously, in unlucky cases, it was possible for pg_rewind to remove
certain WAL segments from the rewound demoted primary. In particular
this happens if those files have been marked for archival (i.e., their
.ready files were created) but not yet archived; the newly promoted node
no longer has such files because of them having been recycled, but they
are likely critical for recovery in the demoted node. If pg_rewind
removes them, recovery is not possible anymore.
Fix this by maintaining a hash table of files in this situation in the
scan that looks for a checkpoint, which the decide_file_actions phase
can consult so that it knows to preserve them.
Backpatch to 14. The problem also exists in 13, but that branch was not
blessed with commit eb00f1d4bf, so this patch is difficult to apply
there. Users of older releases will just have to continue to be extra
careful when rewinding.
Co-authored-by: Полина Бунгина (Polina Bungina) <bungina@gmail.com>
Co-authored-by: Alexander Kukushkin <cyberdemn@gmail.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Atsushi Torikoshi <torikoshia@oss.nttdata.com>
Discussion: https://postgr.es/m/CAAtGL4AhzmBRsEsaDdz7065T+k+BscNadfTqP1NcPmsqwA5HBw@mail.gmail.com
Sloppy refactoring in commit cca97ce6a caused these programs
to pass dbname = NULL to libpq if there was no "--dbname" switch
on the command line, where before "replication" would be passed.
This didn't break things completely, because the source server doesn't
care about the dbname specified for a physical replication connection.
However, it did cause libpq to fail to match a ~/.pgpass entry that
has "replication" in the dbname field. Restore the previous behavior
of passing "replication".
Also, closer inspection shows that if you do specify a dbname
in the connection string, that is what will be matched to ~/.pgpass,
not "replication". This was the pre-existing behavior so we should
not change it, but the SGML docs were pretty misleading about it.
Improve that.
Per bug #18685 from Toshi Harada. Back-patch to v17 where the
error crept in.
Discussion: https://postgr.es/m/18685-fee2dd142b9688f1@postgresql.org
Discussion: https://postgr.es/m/2702546.1730740456@sss.pgh.pa.us
Suppose that you run a command like "pg_combinebackup b1 b2 -o output",
but both b1 and b2 contain an INCREMENTAL.$something file in a directory
that is expected to contain relation files. This is an error, but the
previous code would not detect the problem and instead write a garbage
full file named $something to the output directory. This commit adds
code to detect the error and a test case to verify the behavior.
It's difficult to imagine that this will ever happen unless someone
is intentionally trying to break incremental backup, but per discussion,
let's consider that the lack of adequate sanity checking in this area is
a bug and back-patch to v17, where incremental backup was introduced.
Patch by me, reviewed by Bertrand Drouvot and Amul Sul.
Discussion: http://postgr.es/m/CA+TgmoaD7dBYPqe7kMtO0dyto7rd0rUh7joh=JPUSaFszKY6Pg@mail.gmail.com
This function is always called with a relative_path that ends in a
slash, so there's no need to insert a second one. So, don't. Instead,
add an assertion to verify that nothing gets broken in the future, and
adjust the comments.
While this is not a critical bug, the duplicate slash is visible in
error messages, which could create confusion, so back-patch to v17.
This is also better in that it keeps the code consistent across
branches.
Patch by me, reviewed by Bertrand Drouvot and Amul Sul.
Discussion: http://postgr.es/m/CA+TgmoaD7dBYPqe7kMtO0dyto7rd0rUh7joh=JPUSaFszKY6Pg@mail.gmail.com
Attempting to use an interval of time less than 1ms would cause \watch
to hang. This was confusing, so let's change the logic so as an
interval lower than 1ms behaves the same as 0.
Comments are added to mention that the internals of do_watch() had
better rely on "sleep_ms", the interval value in milliseconds. While on
it, this commit adds a test to check the behavior of interval values
less than 1ms.
\watch hanging for interval values less than 1ms existed before
6f9ee74d45, that has changed the code to support an interval value of
0.
Reported-by: Heikki Linnakangas
Author: Andrey M. Borodin, Michael Paquier
Discussion: https://postgr.es/m/88445e0e-3156-4b9d-afae-9a1a7b1631f6@iki.fi
Backpatch-through: 16
Commit 1ab67c9dfa, which modified this catalog query so that it
doesn't return temporary relations, forgot to schema-qualify the
operator. A comment earlier in the function implores us to fully
qualify everything in the query:
* Since we execute the constructed query with the default search_path
* (which could be unsafe), everything in this query MUST be fully
* qualified.
This commit fixes that. While at it, add a newline for consistency
with surrounding code.
Reviewed-by: Noah Misch
Discussion: https://postgr.es/m/ZwQJYcuPPUsF0reU%40nathan
Backpatch-through: 12
Several places treat MyStartTime as a "long", which is only 32 bits
wide on some platforms. In reality, MyStartTime is a pg_time_t,
i.e., a signed 64-bit integer. This will lead to interesting bugs
on the aforementioned systems in 2038 when signed 32-bit integers
are no longer sufficient to store Unix time (e.g., "pg_ctl start"
hanging). To fix, ensure that MyStartTime is handled as a 64-bit
value everywhere. (Of course, users will need to ensure that
time_t is 64 bits wide on their system, too.)
Co-authored-by: Max Johnson
Discussion: https://postgr.es/m/CO1PR07MB905262E8AC270FAAACED66008D682%40CO1PR07MB9052.namprd07.prod.outlook.com
Backpatch-through: 12
