recursion when we are unable to convert a localized error message to the
client's encoding. We've been over this ground before, but as reported by
Ibrar Ahmed, it still didn't work in the case of conversion failures for
the conversion-failure message itself :-(. Fix by installing a "circuit
breaker" that disables attempts to localize this message once we get into
recursion trouble.
Patch all supported branches, because it is in fact broken in all of them;
though I had to add some missing translations to the older branches in
order to expose the failure in the particular test case I was using.
treat Var and non-Var IN-list items differently. Only non-Var items are
candidates to go into an ANY(ARRAY) construct --- we put all Vars as separate
OR conditions on the grounds that that leaves more scope for optimization.
Per suggestion from Robert Haas.
into an OR of equality comparisons, rather than x = ANY(ARRAY[...]), when there
are Vars in the right-hand side. This avoids a performance regression compared
to pre-8.2 releases, in cases where the OR form can be optimized into scans
of multiple indexes. Limit the possible downside by preferring this form only
when the list isn't very long (I set the cutoff at 32 elements, which is a
bit arbitrary but in the right ballpark). Per discussion with Jim Nasby.
In passing, also make it try the OR form if it cannot select a common type
for the array elements; we've seen a complaint or two about how the OR form
worked for such cases and ARRAY doesn't.
address of afterTriggers->query_stack[afterTriggers->query_depth] and hung
onto it through all its firings of triggers. However, if a trigger causes
sufficiently many nested query executions, query_stack will get repalloc'd
bigger, leaving AfterTriggerEndQuery --- and hence afterTriggerInvokeEvents
--- using a stale pointer.
So far as I can find, the only consequence of this error is to stomp on a
couple of words of already-freed memory; which would lead to a failure only if
that chunk had already gotten re-allocated for something else. So it's hard
to exhibit a simple failure case, but this is surely a bug.
I noticed this while working on my recent patch to reduce pending-trigger
space usage. The present patch is mighty ugly, because it requires making
afterTriggerInvokeEvents know about all the possible event lists it might get
called on. Fortunately, this is only needed in back branches because CVS HEAD
avoids the problem in a different way: afterTriggerInvokeEvents only touches
the passed AfterTriggerEventList pointer once at startup. Back branches are
stable enough that wiring in knowledge of all possible call usages doesn't
seem like a killer problem.
Back-patch to 8.0. 7.4's trigger code is completely different and doesn't
seem to have the problem (it doesn't even use repalloc).
correctly set. As result, killtuple() marks as dead
wrong tuple on page. Bug was introduced by me while fixing
possible duplicates during GiST index scan.
is NULL but SK_SEARCHNULL is not set. Add checking IS NULL of keys
to set during key initialization. If key is NULL and SK_SEARCHNULL is not
set then nothnig can be satisfied.
With assert-enabled compilation that causes coredump.
Bug was introduced in 8.3 by support of IS NULL index scan.
In the previous coding, the list of columns that needed to be hashed on
was allocated in the per-query context, but we reallocated every time
the Agg node was rescanned. Since this information doesn't change over
a rescan, just construct the list of columns once during ExecInitAgg().
according to the TupleDesc's natts, not the number of physical columns in the
tuple. The previous coding would do the wrong thing in cases where natts is
different from the tuple's column count: either incorrectly report error when
it should just treat the column as null, or actually crash due to indexing off
the end of the TupleDesc's attribute array. (The second case is probably not
possible in modern PG versions, due to more careful handling of inheritance
cases than we once had. But it's still a clear lack of robustness here.)
The incorrect error indication is ignored by all callers within the core PG
distribution, so this bug has no symptoms visible within the core code, but
it might well be an issue for add-on packages. So patch all the way back.
to process any pending unlinks for the source database.
Before, if you dropped a relation in the template database just before
CREATE DATABASE, and a checkpoint happened during copydir(), the checkpoint
might delete a file that we're just about to copy, causing lstat() in
copydir() to fail with ENOENT.
Backpatch to 8.3, where the pending unlinks were introduced.
Per report by Matthew Wakeling and analysis by Tom Lane.
use the old relfilenode in the new tablespace. There might be another relation
in the new tablespace with the same relfilenode, so we must generate a fresh
relfilenode in the new tablespace.
The 8.3 patch to let deleted relation files linger as zero-length files until
the next checkpoint made this more obvious: moving a relation from one table
space another, and then back again, caused a collision with the lingering
file.
Back-patch to 8.1. The issue is present in 8.0 as well, but it doesn't seem
worth fixing there, because we didn't have protection from OID collisions
after OID wraparound before 8.1.
Report by Guillaume Lelarge.
a SubLink expression into a rule query. We missed cases where the original
query contained a sub-SELECT in a function in FROM, a multi-row VALUES list,
or a RETURNING list. Per bug #4434 from Dean Rasheed and subsequent
investigation.
Back-patch to 8.1; older releases don't have the issue because they didn't
try to be smart about setting hasSubLinks only when needed.
we regenerate the SQL query text not merely the plan derived from it. This
is needed to handle contingencies such as renaming of a table or column
used in an FK. Pre-8.3, such cases worked despite the lack of replanning
(because the cached plan needn't actually change), so this is a regression.
Per bug #4417 from Benjamin Bihler.
btree. We can't easily tell whether clauses generated from the equivalence
class could be used with such an index, so just assume that they might be.
This bit of over-optimization prevented use of non-btree indexes for nestloop
inner indexscans, in any case where the join uses an equality operator that
is also a btree operator --- which in particular is typically true for hash
indexes. Noted while trying to test the current hash index patch.
GetOldestXmin() instead of RecentGlobalXmin; this is safer because we do not
depend on the latter being correctly set elsewhere, and while it is more
expensive, this code path is not performance-critical. This is a real
risk for autovacuum, because it can execute whole cycles without doing
a single vacuum, which would mean that RecentGlobalXmin would stay at its
initialization value, FirstNormalTransactionId, causing a bogus value to be
inserted in pg_database. This bug could explain some recent reports of
failure to truncate pg_clog.
At the same time, change the initialization of RecentGlobalXmin to
InvalidTransactionId, and ensure that it's set to something else whenever
it's going to be used. Using it as FirstNormalTransactionId in HOT page
pruning could incur in data loss. InitPostgres takes care of setting it
to a valid value, but the extra checks are there to prevent "special"
backends from behaving in unusual ways.
Per Tom Lane's detailed problem dissection in 29544.1221061979@sss.pgh.pa.us
command id is the cmin, when it can in fact be a combo cid. That made rows
incorrectly invisible to a transaction where a tuple was deleted by multiple
aborted subtransactions.
Report and patch Karl Schnaitter. Back-patch to 8.3, where combo cids was
introduced.
a target type that isn't acceptable, the code failed to raise the proper
error. The result instead was to return a NULL expression tree, which
in a quick test led to a 'cache lookup failed for type 0' error later.
Patch 8.3 only --- I fixed this in HEAD as part of recent locations patch.
when its input is constant and the element coercion function is immutable
(or nonexistent, ie, binary-coercible case). This is an oversight in the
8.3 implementation of ArrayCoerceExpr, and its result is that certain cases
involving IN or NOT IN with constants don't get optimized as they should be.
Per experimentation with an example from Ow Mun Heng.
at once and ItemPointers are collected in memory.
Remove tuple's killing by killtuple() if tuple was moved to another
page - it could produce unaceptable overhead.
Backpatch up to 8.1 because the bug was introduced by GiST's concurrency support.
parent, not only those with RangeTblRefs. We need them in ExecCheckRTPerms.
Report by Brendan O'Shea. Back-patch to 8.2, where pull_up_simple_union_all
was introduced.
REINDEX DATABASE including same) is done before a session has done any other
update on pg_class, the pg_class relcache entry was left with an incorrect
setting of rd_indexattr, because the indexed-attributes set would be first
demanded at a time when we'd forced a partial list of indexes into the
pg_class entry, and it would remain cached after that. This could result
in incorrect decisions about HOT-update safety later in the same session.
In practice, since only pg_class_relname_nsp_index would be missed out,
only ALTER TABLE RENAME and ALTER TABLE SET SCHEMA could trigger a problem.
Per report and test case from Ondrej Jirman.
INSERT or UPDATE will match the target table's current rowtype. In pre-8.3
releases inconsistency can arise with stale cached plans, as reported by
Merlin Moncure. (We patched the equivalent hazard on the SELECT side in Feb
2007; I'm not sure why we thought there was no risk on the insertion side.)
In 8.3 and HEAD this problem should be impossible due to plan cache
invalidation management, but it seems prudent to make the check anyway.
Back-patch as far as 8.0. 7.x versions lack ALTER COLUMN TYPE, so there
seems no way to abuse a stale plan comparably.
would work, but in fact it didn't return the same rows when moving backwards
as when moving forwards. This would have no visible effect in a DISTINCT
query (at least assuming the column datatypes use a strong definition of
equality), but it gave entirely wrong answers for DISTINCT ON queries.
the alreadyDeleted list has to be passed down through
deleteDependentObjects(), else objects that are deleted via auto/internal
dependencies don't get reported back up to performMultipleDeletions().
Depending on the visitation order, this could cause the code to try to delete
an already-deleted object, leading to strange errors in DROP OWNED (typically
"cache lookup failed for relation NNNNN" or similar). Per bug #4289.
Patch for back branches only. This code has recently been rewritten in HEAD,
and doesn't have this particular bug anymore.
bug #4290. The fundamental bug is that masking extParam by outer_params,
as finalize_plan had been doing, caused us to lose the information that
an initPlan depended on the output of a sibling initPlan. On reflection
the best thing to do seemed to be not to try to adjust outer_params for
this case but get rid of it entirely. The only thing it was really doing
for us was to filter out param IDs associated with SubPlan nodes, and that
can be done (with greater accuracy) while processing individual SubPlan
nodes in finalize_primnode. This approach was vindicated by the discovery
that the masking method was hiding a second bug: SS_finalize_plan failed to
remove extParam bits for initPlan output params that were referenced in the
main plan tree (it only got rid of those referenced by other initPlans).
It's not clear that this caused any real problems, given the limited use
of extParam by the executor, but it's certainly not what was intended.
I originally thought that there was also a problem with needing to include
indirect dependencies on external params in initPlans' param sets, but it
turns out that the executor handles this correctly so long as the depended-on
initPlan is earlier in the initPlans list than the one using its output.
That seems a bit of a fragile assumption, but it is true at the moment,
so I just documented it in some code comments rather than making what would
be rather invasive changes to remove the assumption.
Back-patch to 8.1. Previous versions don't have the case of initPlans
referring to other initPlans' outputs, so while the existing logic is still
questionable for them, there are not any known bugs to be fixed. So I'll
refrain from changing them for now.
log message at newlines cost O(N^2) for very long messages with few or no
newlines. For messages in the megabyte range this became the dominant cost.
Per gripe from Achilleas Mantzios.
Patch all the way back, since this is a safe change with no portability
risks. I am also thinking of increasing PG_SYSLOG_LIMIT, but that should
be done separately.
results always contribute two groups, regardless of the expression contents.
This is very substantially more accurate than the regular heuristic for
certain boolean tests like "col IS NULL". Per gripe from Sam Mason.
Back-patch to all supported releases, since the behavior of
estimate_num_groups() hasn't changed all that much since 7.4.
the timezone argument as a timezone abbreviation, and only try it as a full
timezone name if that fails. The zic database has four zones (CET, EET, MET,
WET) that are full daylight-savings zones and yet have names that are the
same as their abbreviations for standard time, resulting in ambiguity.
In the timestamp input functions we resolve the ambiguity by preferring the
abbreviation, and AT TIME ZONE should work the same way. (No functionality
is lost because the zic database also has other names for these zones, eg
Europe/Zurich.) Per gripe from Jaromir Talir.
Backpatch to 8.1. Older releases did not have the issue because AT TIME ZONE
only accepted abbreviations not zone names. (Thus, this patch also arguably
fixes a compatibility botch introduced at 8.1: in ambiguous cases we now
behave the same as 8.0 did.)
variable that has units. Per report from Stefan Kaltenbrunner.
Backport to 8.2. I also backported my patch of 2007-06-21 that prevented
comparable overflows on the input side, since that now seems to have enough
field track record to be back-patched safely. That patch included addition
of hints listing the available unit names, which I did not bother to strip
out of it --- this will make a little more work for the translators, but
they can copy the translation from 8.3, and anyway an untranslated hint
is better than no hint.
of any lower outer join, even if it also references the non-nullable side and
so could not get pushed below the outer join anyway. We need this in case
the clause is an OR clause: if it doesn't get marked outerjoin_delayed,
create_or_index_quals() could pull an indexable restriction for the nullable
side out of it, leading to wrong results as demonstrated by today's bug
report from toruvinn. (See added regression test case for an example.)
In principle this has been wrong for quite a while. In practice I don't
think any branch before 8.3 can really show the failure, because
create_or_index_quals() will only pull out indexable conditions, and before
8.3 those were always strict. So though we might have improperly generated
null-extended rows in the outer join, they'd get discarded from the result
anyway. The gating factor that makes the failure visible is that 8.3
considers "col IS NULL" to be indexable. Hence I'm not going to risk
back-patching further than 8.3.
by installing an error context subroutine that will provide the file name
and line number for all errors detected while reading a config file.
Some of the reader routines were already doing that in an ad-hoc way for
errors detected directly in the reader, but it didn't help for problems
detected in subroutines, such as encoding violations.
Back-patch to 8.3 because 8.3 is where people will be trying to debug
configuration files.
that it depends on for replan-forcing purposes. We need to consider plain OID
constants too, because eval_const_expressions folds a RelabelType atop a Const
to just a Const. This change could result in OID values that aren't really
for tables getting added to the dependency list, but the worst-case
consequence would be occasional useless replans. Per report from Gabriele
Messineo.
the problem happened in. These are all supposedly can't-happen cases, but
when they do happen it's useful to know where.
Back-patch to 8.3, but not further because the patch doesn't apply cleanly
further back. Given the lack of response to my proposal of this, there
doesn't seem to be enough interest to justify much back-porting effort.
CacheInvalidateRelcache() crashes if called in WAL recovery, because the
invalidation infrastructure hasn't been initialized yet.
Back-patch to 8.2, where the bug was introduced.
