bucket number, so as to ensure locality of access to the index during the
insertion step. Without this, building an index significantly larger than
available RAM takes a very long time because of thrashing. On the other
hand, sorting is just useless overhead when the index does fit in RAM.
We choose to sort when the initial index size exceeds effective_cache_size.
This is a revised version of work by Tom Raney and Shreya Bhargava.
messages if the calling transaction aborts later on. Collapsing out line
pointer redirects is a done deal as soon as we complete the page update,
so syscache *must* be notified even if the VACUUM FULL as a whole doesn't
complete. To fix, add some functionality to inval.c to allow the pending
inval messages to be sent immediately while heap_page_prune is still
running. The implementation is a bit chintzy: it will only work in the
context of VACUUM FULL. But that's all we need now, and it can always be
extended later if needed. Per my trouble report of a week ago.
variables to it. More need to be converted, but I wanted to get this in
before it conflicts with too much...
Other than just centralising the text-to-int conversion for parameters,
this allows the pg_settings view to contain a list of available options
and allows an error hint to show what values are allowed.
pattern-examination heuristic method to purely histogram-driven selectivity at
histogram size 100, we compute both estimates and use a weighted average.
The weight put on the heuristic estimate decreases linearly with histogram
size, dropping to zero for 100 or more histogram entries.
Likewise in ltreeparentsel(). After a patch by Greg Stark, though I
reorganized the logic a bit to give the caller of histogram_selectivity()
more control.
were discussed last year, but we felt it was too late in the 8.3 cycle to
change the code immediately. Specifically, the patch:
* Reduces the minimum datum size to be considered for compression from
256 to 32 bytes, as suggested by Greg Stark.
* Increases the required compression rate for compressed storage from
20% to 25%, again per Greg's suggestion.
* Replaces force_input_size (size above which compression is forced)
with a maximum size to be considered for compression. It was agreed
that allowing large inputs to escape the minimum-compression-rate
requirement was not bright, and that indeed we'd rather have a knob
that acted in the other direction. I set this value to 1MB for the
moment, but it could use some performance studies to tune it.
* Adds an early-failure path to the compressor as suggested by Jan:
if it's been unable to find even one compressible substring in the
first 1KB (parameterizable), assume we're looking at incompressible
input and give up. (Possibly this logic can be improved, but I'll
commit it as-is for now.)
* Improves the toasting heuristics so that when we have very large
fields with attstorage 'x' or 'e', we will push those out to toast
storage before considering inline compression of shorter fields.
This also responds to a suggestion of Greg's, though my original
proposal for a solution was a bit off base because it didn't fix
the problem for large 'e' fields.
There was some discussion in the earlier threads of exposing some
of the compression knobs to users, perhaps even on a per-column
basis. I have not done anything about that here. It seems to me
that if we are changing around the parameters, we'd better get some
experience and be sure we are happy with the design before we set
things in stone by providing user-visible knobs.
represented as "char ...[4]" not "int32". Since the length word is never
supposed to be accessed via this struct member anyway, this won't break
any existing code that is following the rules. The advantage is that C
compilers will no longer assume that a pointer to struct varlena is
word-aligned, which prevents incorrect optimizations in TOAST-pointer
access and perhaps other places. gcc doesn't seem to do this (at least
not at -O2), but the problem is demonstrable on some other compilers.
I changed struct inet as well, but didn't bother to touch a lot of other
struct definitions in which it wouldn't make any difference because there
were other fields forcing int alignment anyway. Hopefully none of those
struct definitions are used for accessing unaligned Datums.
data structures and backend internal APIs. This solves problems we've seen
recently with inconsistent layout of pg_control between machines that have
32-bit time_t and those that have already migrated to 64-bit time_t. Also,
we can get out from under the problem that Windows' Unix-API emulation is not
consistent about the width of time_t.
There are a few remaining places where local time_t variables are used to hold
the current or recent result of time(NULL). I didn't bother changing these
since they do not affect any cross-module APIs and surely all platforms will
have 64-bit time_t before overflow becomes an actual risk. time_t should
be avoided for anything visible to extension modules, however.
TimestampTzPlusMilliseconds. An integer argument of more than INT_MAX/1000
milliseconds (ie, about 35 minutes) would provoke a wrong result, resulting
in incorrect enforcement of statement_timestamp values larger than that.
Bug was introduced in my rewrite of 2006-06-20, which fixed some other
overflow risks, but missed this one :-( Per report from Elein.
in whichever context happens to be current during a call of an xml.c function,
use a dedicated context that will not go away until we explicitly delete it
(which we do at transaction end or subtransaction abort). This makes recovery
after an error much simpler --- we don't have to individually delete the data
structures created by libxml. Also, we need to initialize and cleanup libxml
only once per transaction (if there's no error) instead of once per function
call, so it should be a bit faster. We'll need to keep an eye out for
intra-transaction memory leaks, though. Alvaro and Tom.
were reporting ERROR for interactive assignments and LOG for other cases,
some were saying nothing for non-interactive cases, and a few did yet other
things. Make them use a new function GUC_complaint_elevel() to establish
a reasonably uniform policy about how to report. There are still a few
edge cases such as assign_search_path(), but it's much better than before.
Per gripe from Devrim Gunduz and subsequent discussion.
As noted by Alvaro, it'd be better to fold these custom messages into the
standard "invalid parameter value" complaint from guc.c, perhaps as the DETAIL
field. However that will require more redesign than seems prudent for 8.3.
This is a relatively safe, low-impact change that we can afford to risk now.
the two join variables at both ends: not only trailing rows that need not be
scanned because there cannot be a match on the other side, but initial rows
that will be scanned without possibly having a match. This allows a more
realistic estimate of startup cost to be made, per recent pgsql-performance
discussion. In passing, fix a couple of bugs that had crept into
mergejoinscansel: it was not quite up to speed for the task of estimating
descending-order scans, which is a new requirement in 8.3.
constraint status of copied indexes (bug #3774), as well as various other
small bugs such as failure to pstrdup when needed. Allow INCLUDING INDEXES
indexes to be merged with identical declared indexes (perhaps not real useful,
but the code is there and having it not apply to LIKE indexes seems pretty
unorthogonal). Avoid useless work in generateClonedIndexStmt(). Undo some
poorly chosen API changes, and put a couple of routines in modules that seem
to be better places for them.
make_greater_string() try harder to generate a string that's actually greater
than its input string. Before we just assumed that making a string that was
memcmp-greater was enough, but it is easy to generate examples where this is
not so when the locale is not C. Instead, loop until the relevant comparison
function agrees that the generated string is greater than the input.
Unfortunately this is probably not enough to guarantee that the generated
string is greater than all extensions of the input, so we cannot relax the
restriction to C locale for the LIKE/regex index optimization. But it should
at least improve the odds of getting a useful selectivity estimate in
prefix_selectivity(). Per example from Guillaume Smet.
Backpatch to 8.1, mainly because that's what the complainant is using...
it affects. The original coding neglected tablespace entirely (causing
the indexes to move to the database's default tablespace) and for an index
belonging to a UNIQUE or PRIMARY KEY constraint, it would actually try to
assign the parent table's reloptions to the index :-(. Per bug #3672 and
subsequent investigation.
8.0 and 8.1 did not have reloptions, but the tablespace bug is present.
word comes before the weight instead of after. This will allow future
binary-compatible extension of the representation to support compact formats,
as discussed on pgsql-hackers around 2007/06/18. The reason to do it now is
that we've already pretty well broken any chance of simple in-place upgrade
from 8.2 to 8.3, but it's possible that 8.3 to 8.4 (or whenever we get around
to squeezing NUMERIC) could otherwise be data-compatible.
columns, and the new version can be stored on the same heap page, we no longer
generate extra index entries for the new version. Instead, index searches
follow the HOT-chain links to ensure they find the correct tuple version.
In addition, this patch introduces the ability to "prune" dead tuples on a
per-page basis, without having to do a complete VACUUM pass to recover space.
VACUUM is still needed to clean up dead index entries, however.
Pavan Deolasee, with help from a bunch of other people.
database via builtin functions, as recently discussed on -hackers.
chr() now returns a character in the database encoding. For UTF8 encoded databases
the argument is treated as a Unicode code point. For other multi-byte encodings
the argument must designate a strict ascii character, or an error is raised,
as is also the case if the argument is 0.
ascii() is adjusted so that it remains the inverse of chr().
The two argument form of convert() is gone, and the three argument form now
takes a bytea first argument and returns a bytea. To cover this loss three new
functions are introduced:
. convert_from(bytea, name) returns text - converts the first argument from the
named encoding to the database encoding
. convert_to(text, name) returns bytea - converts the first argument from the
database encoding to the named encoding
. length(bytea, name) returns int - gives the length of the first argument in
characters in the named encoding
transaction, unless rolled back or overridden by a SET clause for the same
variable attached to a surrounding function call. Per discussion, these
seem the best semantics. Note that this is an INCOMPATIBLE CHANGE: in 8.0
through 8.2, SET LOCAL's effects disappeared at subtransaction commit
(leading to behavior that made little sense at the SQL level).
I took advantage of the opportunity to rewrite and simplify the GUC variable
save/restore logic a little bit. The old idea of a "tentative" value is gone;
it was a hangover from before we had a stack. Also, we no longer need a stack
entry for every nesting level, but only for those in which a variable's value
actually changed.
and in passing, fix some bogosities dating from the custom_variable_classes
patch. Fix guc-file.l to correctly check changes in custom_variable_classes
that are attempted concurrently with additions/removals of custom variables,
and don't allow the new setting to be applied in advance of checking it.
Clean up messy and undocumented situation for string variables with NULL
boot_val. Fix DefineCustomVariable functions to initialize boot_val
correctly. Prevent find_option from inserting bogus placeholders for custom
variables that are simply inquired about rather than being set.
(Actually, it works as a plain statement too, but I didn't document that
because it seems a bit useless.) Unify VariableResetStmt with
VariableSetStmt, and clean up some ancient cruft in the representation of
same.
There are still some loose ends: I didn't do anything about the SET FROM
CURRENT idea yet, and it's not real clear whether we are happy with the
interaction of SET LOCAL with function-local settings. The documentation
is a bit spartan, too.
the number of rows likely to be produced by a query such as
SELECT * FROM t1 LEFT JOIN t2 USING (key) WHERE t2.key IS NULL;
What this is doing is selecting for t1 rows with no match in t2, and thus
it may produce a significant number of rows even if the t2.key table column
contains no nulls at all. 8.2 thinks the table column's null fraction is
relevant and thus may estimate no rows out, which results in terrible plans
if there are more joins above this one. A proper fix for this will involve
passing much more information about the context of a clause to the selectivity
estimator functions than we ever have. There's no time left to write such a
patch for 8.3, and it wouldn't be back-patchable into 8.2 anyway. Instead,
put in an ad-hoc test to defeat the normal table-stats-based estimation when
an IS NULL test is evaluated at an outer join, and just use a constant
estimate instead --- I went with 0.5 for lack of a better idea. This won't
catch every case but it will catch the typical ways of writing such queries,
and it seems unlikely to make things worse for other queries.
days that was obsolete the moment we had IN (SELECT ...) capability.
It's arguably a security hole since it applied no permissions check to
the table it searched, and since it was never documented anywhere,
removing it seems more appropriate than fixing it.
Oleg Bartunov and Teodor Sigaev, but I did a lot of editorializing,
so anything that's broken is probably my fault.
Documentation is nonexistent as yet, but let's land the patch so we can
get some portability testing done.
that still thought they could set HEAP_XMAX_COMMITTED immediately after
seeing the other transaction commit. Make them use the same logic as
tqual.c does to determine if the hint bit can be set yet.
unwarranted liberties with int8 vs float8 values for these types.
Specifically, be sure to apply either hashint8 or hashfloat8 depending
on HAVE_INT64_TIMESTAMP. Per my gripe of even date.
an array of strings rather than an array of integers, and allow any simple
constant or identifier to be used in typmods; for example
create table foo (f1 widget(42,'23skidoo',point));
Of course the typmodin function has still got to pack this info into a
non-negative int32 for storage, but it's still a useful improvement in
flexibility, especially considering that you can do nearly anything if you
are willing to keep the info in a side table. We can get away with this
change since we have not yet released a version providing user-definable
typmods. Per discussion.
were accepted by prior Postgres releases. This takes care of the loose end
left by the preceding patch to downgrade implicit casts-to-text. To avoid
breaking desirable behavior for array concatenation, introduce a new
polymorphic pseudo-type "anynonarray" --- the added concatenation operators
are actually text || anynonarray and anynonarray || text.
from the other string-category types; this eliminates a lot of surprising
interpretations that the parser could formerly make when there was no directly
applicable operator.
Create a general mechanism that supports casts to and from the standard string
types (text,varchar,bpchar) for *every* datatype, by invoking the datatype's
I/O functions. These new casts are assignment-only in the to-string direction,
explicit-only in the other, and therefore should create no surprising behavior.
Remove a bunch of thereby-obsoleted datatype-specific casting functions.
The "general mechanism" is a new expression node type CoerceViaIO that can
actually convert between *any* two datatypes if their external text
representations are compatible. This is more general than needed for the
immediate feature, but might be useful in plpgsql or other places in future.
This commit does nothing about the issue that applying the concatenation
operator || to non-text types will now fail, often with strange error messages
due to misinterpreting the operator as array concatenation. Since it often
(not always) worked before, we should either make it succeed or at least give
a more user-friendly error; but details are still under debate.
Peter Eisentraut and Tom Lane
a session regardless of the existence of cached plans. The plancache
only needs to be invalidated so that rules affected by the new setting
will be reflected in the new query plans.
Jan
tablespace(s) in which to store temp tables and temporary files. This is a
list to allow spreading the load across multiple tablespaces (a random list
element is chosen each time a temp object is to be created). Temp files are
not stored in per-database pgsql_tmp/ directories anymore, but per-tablespace
directories.
Jaime Casanova and Albert Cervera, with review by Bernd Helmle and Tom Lane.
type. Also, add explicit casts between boolean and text/varchar. Both
of these changes are for conformance with SQL:2003.
Update the regression tests, bump the catversion.
"microsecond" and "millisecond" units were not considered valid input
by themselves, which caused inputs like "1 millisecond" to be rejected
erroneously.
Update the docs, add regression tests, and backport to 8.2 and 8.1
and aborted transactions have different effects; also teach it not to assume
that prepared transactions are always committed.
Along the way, simplify the pgstats API by tying counting directly to
Relations; I cannot detect any redeeming social value in having stats
pointers in HeapScanDesc and IndexScanDesc structures. And fix a few
corner cases in which counts might be missed because the relation's
pgstat_info pointer hadn't been set.
is using mark/restore but not rewind or backward-scan capability. Insert a
materialize plan node between a mergejoin and its inner child if the inner
child is a sort that is expected to spill to disk. The materialize shields
the sort from the need to do mark/restore and thereby allows it to perform
its final merge pass on-the-fly; while the materialize itself is normally
cheap since it won't spill to disk unless the number of tuples with equal
key values exceeds work_mem.
Greg Stark, with some kibitzing from Tom Lane.
- Function renamed to "xpath".
- Function is now strict, per discussion.
- Return empty array in case when XPath expression detects nothing
(previously, NULL was returned in such case), per discussion.
- (bugfix) Work with fragments with prologue: select xpath('/a',
'<?xml version="1.0"?><a /><b />'); // now XML datum is always wrapped
with dummy <x>...</x>, XML prologue simply goes away (if any).
- Some cleanup.
Nikolay Samokhvalov
Some code cleanup and documentation work by myself.
and inet_server_addr() fail if the client connected over a "scoped" IPv6
address. In this case getnameinfo() will return a string ending with
a poorly-standardized "%something" zone specifier, which these functions
try to feed to network_in(), which won't take it. So that we don't lose
functionality altogether, suppress the zone specifier before giving the
string to network_in(). Per report from Brian Hirt.
TODO: probably someday the inet type should support scoped IPv6 addresses,
and then this patch should be reverted.
Backpatch to 8.2 ... is it worth going further?
numerics as "oprcanhash", and make the corresponding system catalog
updates. As a result, hash indexes, hashed aggregation, and hash
joins can now be used with the numeric type. Bump the catversion.
The only tricky aspect to doing this is writing a correct hash
function: it's possible for two Numerics to be equal according to
their equality operator, but have different in-memory bit patterns.
To cope with this, the hash function doesn't consider the Numeric's
"scale" or "sign", and explictly skips any leading or trailing
zeros in the Numeric's digit buffer (the current implementation
should suppress any such zeros, but it seems unwise to rely upon
this). See discussion on pgsql-patches for more details.
and for other compilers, insert a dummy exit() call so that they understand
PG_RE_THROW() doesn't return. Insert fflush(stderr) in ExceptionalCondition,
per recent buildfarm evidence that that might not happen automatically on some
platforms. And const-ify ExceptionalCondition's declaration while at it.
need be returned. We keep a heap of the current best N tuples and sift-up
new tuples into it as we scan the input. For M input tuples this means
only about M*log(N) comparisons instead of M*log(M), not to mention a lot
less workspace when N is small --- avoiding spill-to-disk for large M
is actually the most attractive thing about it. Patch includes planner
and executor support for invoking this facility in ORDER BY ... LIMIT
queries. Greg Stark, with some editorialization by moi.
isn't any place to throw the error to. If so, we should treat the error
as FATAL, just as we would have if it'd been thrown outside the PG_TRY
block to begin with.
Although this is clearly a *potential* source of bugs, it is not clear
at the moment whether it is an *actual* source of bugs; there may not
presently be any PG_TRY blocks in code that can be reached with no outer
longjmp catcher. So for the moment I'm going to be conservative and not
back-patch this. The change breaks ABI for users of PG_RE_THROW and hence
might create compatibility problems for loadable modules, so we should not
put it into released branches without proof that it's needed.
from time_t to TimestampTz representation. This provides full gettimeofday()
resolution of the timestamps, which might be useful when attempting to
do point-in-time recovery --- previously it was not possible to specify
the stop point with sub-second resolution. But mostly this is to get
rid of TimestampTz-to-time_t conversion overhead during commit. Per my
proposal of a day or two back.
messages to the stats collector. This avoids the problem that enabling
stats_row_level for autovacuum has a significant overhead for short
read-only transactions, as noted by Arjen van der Meijden. We can avoid
an extra gettimeofday call by piggybacking on the one done for WAL-logging
xact commit or abort (although that doesn't help read-only transactions,
since they don't WAL-log anything).
In my proposal for this, I noted that we could change the WAL log entries
for commit/abort to record full TimestampTz precision, instead of only
time_t as at present. That's not done in this patch, but will be committed
separately.
is in progress on the same hashtable. This seems the least invasive way to
fix the recently-recognized problem that a split could cause the scan to
visit entries twice or (with much lower probability) miss them entirely.
The only field-reported problem caused by this is the "failed to re-find
shared lock object" PANIC in COMMIT PREPARED reported by Michel Dorochevsky,
which was caused by multiply visited entries. However, it seems certain
that mdsync() is vulnerable to missing required fsync's due to missed
entries, and I am fearful that RelationCacheInitializePhase2() might be at
risk as well. Because of that and the generalized hazard presented by this
bug, back-patch all the supported branches.
Along the way, fix pg_prepared_statement() and pg_cursor() to not assume
that the hashtables they are examining will stay static between calls.
This is risky regardless of the newly noted dynahash problem, because
hash_seq_search() has never promised to cope with deletion of table entries
other than the just-returned one. There may be no bug here because the only
supported way to call these functions is via ExecMakeTableFunctionResult()
which will cycle them to completion before doing anything very interesting,
but it seems best to get rid of the assumption. This affects 8.2 and HEAD
only, since those functions weren't there earlier.
a replan. I had originally thought this was not necessary, but the new
SPI facilities create a path whereby queries planned with non-default
options can get into the cache, so it is necessary.
reviewed by Neil Conway. This patch adds the following DDL command
variants: RESET SESSION, RESET TEMP, RESET PLANS, CLOSE ALL, and
DEALLOCATE ALL. RESET SESSION is intended for use by connection
pool software and the like, in order to reset a client session
to something close to its initial state.
Note that while most of these command variants can be executed
inside a transaction block (but are not transaction-aware!),
RESET SESSION cannot. While this is inconsistent, it is intended
to catch programmer mistakes: RESET SESSION in an open transaction
block is probably unintended.
This commit breaks any code that assumes that the mere act of forming a tuple
(without writing it to disk) does not "toast" any fields. While all available
regression tests pass, I'm not totally sure that we've fixed every nook and
cranny, especially in contrib.
Greg Stark with some help from Tom Lane
seen by code inspecting the expression. The best way to do this seems
to be to drop the original representation as a function invocation, and
instead make a special expression node type that represents applying
the element-type coercion function to each array element. In this way
the element function is exposed and will be checked for volatility.
Per report from Guillaume Smet.
A DBA is allowed to create a language in his database if it's marked
"tmpldbacreate" in pg_pltemplate. The factory default is that this is set
for all standard trusted languages, but of course a superuser may adjust
the settings. In service of this, add the long-foreseen owner column to
pg_language; renaming, dropping, and altering owner of a PL now follow
normal ownership rules instead of being superuser-only.
Jeremy Drake, with some editorialization by Tom Lane.
pointer" in every Snapshot struct. This allows removal of the case-by-case
tests in HeapTupleSatisfiesVisibility, which should make it a bit faster
(I didn't try any performance tests though). More importantly, we are no
longer violating portable C practices by assuming that small integers are
distinct from all pointer values, and HeapTupleSatisfiesDirty no longer
has a non-reentrant API involving side-effects on a global variable.
There were a couple of places calling HeapTupleSatisfiesXXX routines
directly rather than through the HeapTupleSatisfiesVisibility macro.
Since these places had to be changed anyway, I chose to make them go
through the macro for uniformity.
Along the way I renamed HeapTupleSatisfiesSnapshot to HeapTupleSatisfiesMVCC
to emphasize that it's only used with MVCC-type snapshots. I was sorely
tempted to rename HeapTupleSatisfiesVisibility to HeapTupleSatisfiesSnapshot,
but forebore for the moment to avoid confusion and reduce the likelihood that
this patch breaks some of the pending patches. Might want to reconsider
doing that later.
search_path that was active when the plan was first made. To do this,
improve namespace.c to support a stack of "override" search path settings
(we must have a stack since nested replan events are entirely possible).
This facility replaces the "special namespace" hack formerly used by
CREATE SCHEMA, and should be able to support per-function search path
settings as well.
and regexp_split_to_table. These functions provide access to the
capture groups resulting from a POSIX regular expression match,
and provide the ability to split a string on a POSIX regular
expression, respectively. Patch from Jeremy Drake; code review by
Neil Conway, additional comments and suggestions from Tom and
Peter E.
This patch bumps the catversion, adds some regression tests,
and updates the docs.
rules to be defined with different, per session controllable, behaviors
for replication purposes.
This will allow replication systems like Slony-I and, as has been stated
on pgsql-hackers, other products to control the firing mechanism of
triggers and rewrite rules without modifying the system catalog directly.
The firing mechanisms are controlled by a new superuser-only GUC
variable, session_replication_role, together with a change to
pg_trigger.tgenabled and a new column pg_rewrite.ev_enabled. Both
columns are a single char data type now (tgenabled was a bool before).
The possible values in these attributes are:
'O' - Trigger/Rule fires when session_replication_role is "origin"
(default) or "local". This is the default behavior.
'D' - Trigger/Rule is disabled and fires never
'A' - Trigger/Rule fires always regardless of the setting of
session_replication_role
'R' - Trigger/Rule fires when session_replication_role is "replica"
The GUC variable can only be changed as long as the system does not have
any cached query plans. This will prevent changing the session role and
accidentally executing stored procedures or functions that have plans
cached that expand to the wrong query set due to differences in the rule
firing semantics.
The SQL syntax for changing a triggers/rules firing semantics is
ALTER TABLE <tabname> <when> TRIGGER|RULE <name>;
<when> ::= ENABLE | ENABLE ALWAYS | ENABLE REPLICA | DISABLE
psql's \d command as well as pg_dump are extended in a backward
compatible fashion.
Jan
uses SPI plans, this finally fixes the ancient gotcha that you can't
drop and recreate a temp table used by a plpgsql function.
Along the way, clean up SPI's API a little bit by declaring SPI plan
pointers as "SPIPlanPtr" instead of "void *". This is cosmetic but
helps to forestall simple programming mistakes. (I have changed some
but not all of the callers to match; there are still some "void *"'s
in contrib and the PL's. This is intentional so that we can see if
anyone's compiler complains about it.)
module and teach PREPARE and protocol-level prepared statements to use it.
In service of this, rearrange utility-statement processing so that parse
analysis does not assume table schemas can't change before execution for
utility statements (necessary because we don't attempt to re-acquire locks
for utility statements when reusing a stored plan). This requires some
refactoring of the ProcessUtility API, but it ends up cleaner anyway,
for instance we can get rid of the QueryContext global.
Still to do: fix up SPI and related code to use the plan cache; I'm tempted to
try to make SQL functions use it too. Also, there are at least some aspects
of system state that we want to ensure remain the same during a replan as in
the original processing; search_path certainly ought to behave that way for
instance, and perhaps there are others.
log_min_messages does; and arrange to suppress the duplicative output
that would otherwise result from log_statement and log_duration messages.
Bruce Momjian and Tom Lane.
Get rid of VARATT_SIZE and VARATT_DATA, which were simply redundant with
VARSIZE and VARDATA, and as a consequence almost no code was using the
longer names. Rename the length fields of struct varlena and various
derived structures to catch anyplace that was accessing them directly;
and clean up various places so caught. In itself this patch doesn't
change any behavior at all, but it is necessary infrastructure if we hope
to play any games with the representation of varlena headers.
Greg Stark and Tom Lane
drill down into subplan targetlists to print the referent expression for an
OUTER or INNER var in an upper plan node. Hence, make it do that always, and
banish the old hack of showing "?columnN?" when things got too complicated.
Along the way, fix an EXPLAIN bug I introduced by suppressing subqueries from
execution-time range tables: get_name_for_var_field() assumed it could look at
rte->subquery to find out the real type of a RECORD var. That doesn't work
anymore, but instead we can look at the input plan of the SubqueryScan plan
node.
storing mostly-redundant Query trees in prepared statements, portals, etc.
To replace Query, a new node type called PlannedStmt is inserted by the
planner at the top of a completed plan tree; this carries just the fields of
Query that are still needed at runtime. The statement lists kept in portals
etc. now consist of intermixed PlannedStmt and bare utility-statement nodes
--- no Query. This incidentally allows us to remove some fields from Query
and Plan nodes that shouldn't have been there in the first place.
Still to do: simplify the execution-time range table; at the moment the
range table passed to the executor still contains Query trees for subqueries.
initdb forced due to change of stored rules.
to_timestamp():
- ID for day-of-week
- IDDD for day-of-year
This makes it possible to convert ISO week dates to and from text
fully represented in either week ('IYYY-IW-ID') or day-of-year
('IYYY-IDDD') format.
I have also added an 'isoyear' field for use with extract / date_part.
Brendan Jurd
equality checks it applies, instead of a random dependence on whatever
operators might be named "=". The equality operators will now be selected
from the opfamily of the unique index that the FK constraint depends on to
enforce uniqueness of the referenced columns; therefore they are certain to be
consistent with that index's notion of equality. Among other things this
should fix the problem noted awhile back that pg_dump may fail for foreign-key
constraints on user-defined types when the required operators aren't in the
search path. This also means that the former warning condition about "foreign
key constraint will require costly sequential scans" is gone: if the
comparison condition isn't indexable then we'll reject the constraint
entirely. All per past discussions.
Along the way, make the RI triggers look into pg_constraint for their
information, instead of using pg_trigger.tgargs; and get rid of the always
error-prone fixed-size string buffers in ri_triggers.c in favor of building up
the RI queries in StringInfo buffers.
initdb forced due to columns added to pg_constraint and pg_trigger.
keeping private state in each backend that has inserted and deleted the same
tuple during its current top-level transaction. This is sufficient since
there is no need to be able to determine the cmin/cmax from any other
transaction. This gets us back down to 23-byte headers, removing a penalty
paid in 8.0 to support subtransactions. Patch by Heikki Linnakangas, with
minor revisions by moi, following a design hashed out awhile back on the
pghackers list.
observe the xmloption.
Reorganize the representation of the XML option in the parse tree and the
API to make it easier to manage and understand.
Add regression tests for parsing back XML expressions.
Hashing for aggregation purposes still needs work, so it's not time to
mark any cross-type operators as hashable for general use, but these cases
work if the operators are so marked by hand in the system catalogs.
that defined in RFC 4122. This patch includes the basic implementation,
plus regression tests. Documentation and perhaps some additional
functionality will come later. Catversion bumped.
Patch from Gevik Babakhani; review from Peter, Tom, and myself.
- Add new SQL command SET XML OPTION (also available via regular GUC) to
control the DOCUMENT vs. CONTENT option in implicit parsing and
serialization operations.
- Subtle corrections in the handling of the standalone property in
xmlroot().
- Allow xmlroot() to work on content fragments.
- Subtle corrections in the handling of the version property in
xmlconcat().
- Code refactoring for producing XML declarations.
FAMILY; and add FAMILY option to CREATE OPERATOR CLASS to allow adding a
class to a pre-existing family. Per previous discussion. Man, what a
tedious lot of cutting and pasting ...
which I had removed in the first cut of the EquivalenceClass rewrite to
simplify that patch a little. But it's still important --- in a four-way
join problem mergejoinscansel() was eating about 40% of the planning time
according to gprof. Also, improve the EquivalenceClass code to re-use
join RestrictInfos rather than generating fresh ones for each join
considered. This saves some memory space but more importantly improves
the effectiveness of caching planning info in RestrictInfos.
columns procost and prorows, to allow simple user adjustment of the estimated
cost of a function call, as well as control of the estimated number of rows
returned by a set-returning function. We might eventually wish to extend this
to allow function-specific estimation routines, but there seems to be
consensus that we should try a simple constant estimate first. In particular
this provides a relatively simple way to control the order in which different
WHERE clauses are applied in a plan node, which is a Good Thing in view of the
fact that the recent EquivalenceClass planner rewrite made that much less
predictable than before.
representation of equivalence classes of variables. This is an extensive
rewrite, but it brings a number of benefits:
* planner no longer fails in the presence of "incomplete" operator families
that don't offer operators for every possible combination of datatypes.
* avoid generating and then discarding redundant equality clauses.
* remove bogus assumption that derived equalities always use operators
named "=".
* mergejoins can work with a variety of sort orders (e.g., descending) now,
instead of tying each mergejoinable operator to exactly one sort order.
* better recognition of redundant sort columns.
* can make use of equalities appearing underneath an outer join.
The implementation is somewhat ugly logic-wise, but I don't see an
easy way to make it more concise.
When writing this, I noticed that my previous implementation of
width_bucket() doesn't handle NaN correctly:
postgres=# select width_bucket('NaN', 1, 5, 5);
width_bucket
--------------
6
(1 row)
AFAICS SQL:2003 does not define a NaN value, so it doesn't address how
width_bucket() should behave here. The patch changes width_bucket() so
that ereport(ERROR) is raised if NaN is specified for the operand or the
lower or upper bounds to width_bucket(). For float8, NaN is disallowed
for any of the floating-point inputs, and +/- infinity is disallowed
for the histogram bounds (but allowed for the operand).
Update docs and regression tests, bump the catversion.
which comparison operators to use for plan nodes involving tuple comparison
(Agg, Group, Unique, SetOp). Formerly the executor looked up the default
equality operator for the datatype, which was really pretty shaky, since it's
possible that the data being fed to the node is sorted according to some
nondefault operator class that could have an incompatible idea of equality.
The planner knows what it has sorted by and therefore can provide the right
equality operator to use. Also, this change moves a couple of catalog lookups
out of the executor and into the planner, which should help startup time for
pre-planned queries by some small amount. Modify the planner to remove some
other cavalier assumptions about always being able to use the default
operators. Also add "nulls first/last" info to the Plan node for a mergejoin
--- neither the executor nor the planner can cope yet, but at least the API is
in place.
per-column options for btree indexes. The planner's support for this is still
pretty rudimentary; it does not yet know how to plan mergejoins with
nondefault ordering options. The documentation is pretty rudimentary, too.
I'll work on improving that stuff later.
Note incompatible change from prior behavior: ORDER BY ... USING will now be
rejected if the operator is not a less-than or greater-than member of some
btree opclass. This prevents less-than-sane behavior if an operator that
doesn't actually define a proper sort ordering is selected.
form '^(foo)$'. Before, these could never be optimized into indexscans.
The recent changes to make psql and pg_dump generate such patterns (for \d
commands and -t and related switches, respectively) therefore represented
a big performance hit for people with large pg_class catalogs, as seen in
recent gripe from Erik Jones. While at it, be more paranoid about
case-sensitivity checking in multibyte encodings, and fix some other
corner cases in which a regex might be interpreted too liberally.
the XmlExpr code in various lists, use a representation that has some hope
of reverse-listing correctly (though it's still a de-escaping function
shy of correctness), generally try to make it look more like Postgres
coding conventions.
cases. Operator classes now exist within "operator families". While most
families are equivalent to a single class, related classes can be grouped
into one family to represent the fact that they are semantically compatible.
Cross-type operators are now naturally adjunct parts of a family, without
having to wedge them into a particular opclass as we had done originally.
This commit restructures the catalogs and cleans up enough of the fallout so
that everything still works at least as well as before, but most of the work
needed to actually improve the planner's behavior will come later. Also,
there are not yet CREATE/DROP/ALTER OPERATOR FAMILY commands; the only way
to create a new family right now is to allow CREATE OPERATOR CLASS to make
one by default. I owe some more documentation work, too. But that can all
be done in smaller pieces once this infrastructure is in place.
more space is needed, instead of incrementing by a fixed amount; the old
method wastes lots of space and time when the ultimate size is large.
Per gripe from Tatsuo.
stale relcache init files (pg_internal.init), and there is no mechanism for
updating them during WAL replay. Easiest solution is just to delete the init
files at conclusion of startup, and let the first backend started in each
database take care of rebuilding the init file. Simon Riggs and Tom Lane.
Back-patched to 8.1. Arguably this should be fixed in 8.0 too, but it would
require significantly more code since 8.0 has no handy startup-time scan of
pg_database to piggyback on. Manual solution of the problem is possible
in 8.0 (just delete the pg_internal.init files before starting WAL replay),
so that may be a sufficient answer.
timezone actually has a daylight-savings rule. This avoids breaking
cases that used to work because they went through the DecodePosixTimezone
code path. Per contrib regression failures (mea culpa for not running
those yesterday...). Also document the already-applied change to allow
GMT offsets up to 14 hours.
max_stack_depth is not set to an unsafe value.
This commit also provides configure-time checking for <sys/resource.h>,
and cleans up some perhaps-unportable code associated with use of that
include file and getrlimit().
been initialized yet. This can happen because there are code paths that call
SysCacheGetAttr() on a tuple originally fetched from a different syscache
(hopefully on the same catalog) than the one specified in the call. It
doesn't seem useful or robust to try to prevent that from happening, so just
improve the function to cope instead. Per bug#2678 from Jeff Trout. The
specific example shown by Jeff is new in 8.1, but to be on the safe side
I'm backpatching 8.0 as well. We could patch 7.x similarly but I think
that's probably overkill, given the lack of evidence of old bugs of this ilk.
remaining functions, simplify pglz_compress's API to not require a useless
data copy when compression fails. Also add a check in pglz_decompress that
the expected amount of data was decompressed.
postgresql.conf.
- shared_buffers = 32000kB => 32MB
- temp_buffers = 8000kB => 8MB
- wal_buffers = 8 => 64kB
The code of initdb was a bit modified to write MB-unit values.
Values greater than 8000kB are rounded out to MB.
GUC_UNIT_XBLOCKS is added for wal_buffers. It is like GUC_UNIT_BLOCKS,
but uses XLOG_BLCKSZ instead of BLCKSZ.
Also, I cleaned up the test of GUC_UNIT_* flags in preparation to
add more unit flags in less bits.
ITAGAKI Takahiro
the SQL spec, viz IS NULL is true if all the row's fields are null, IS NOT
NULL is true if all the row's fields are not null. The former coding got
this right for a limited number of cases with IS NULL (ie, those where it
could disassemble a ROW constructor at parse time), but was entirely wrong
for IS NOT NULL. Per report from Teodor.
I desisted from changing the behavior for arrays, since on closer inspection
it's not clear that there's any support for that in the SQL spec. This
probably needs more consideration.
is a large enough histogram, it will use the number of matches in the
histogram to derive a selectivity estimate, rather than the admittedly
pretty bogus heuristics involving examining the pattern contents. I set
'large enough' at 100, but perhaps we should change that later. Also
apply the same technique in contrib/ltree's <@ and @> estimator. Per
discussion with Stefan Kaltenbrunner and Matteo Beccati.
contrib functionality. Along the way, remove the USER_LOCKS configuration
symbol, since it no longer makes any sense to try to compile that out.
No user documentation yet ... mmoncure has promised to write some.
Thanks to Abhijit Menon-Sen for creating a first draft to work from.
and create a new view pg_timezone_names that provides information about
the zones known in the 'zic' database. Magnus Hagander, with some
additional work by Tom Lane.
we probably should make them work reliably for all arrays. Fix code
to handle NULLs and multidimensional arrays, move it into arrayfuncs.c.
GIN is still restricted to indexing arrays with no null elements, however.
proposal. Parameter logging works even for binary-format parameters, and
logging overhead is avoided when disabled.
log_statement = all output for the src/test/examples/testlibpq3.c example
now looks like
LOG: statement: execute <unnamed>: SELECT * FROM test1 WHERE t = $1
DETAIL: parameters: $1 = 'joe''s place'
LOG: statement: execute <unnamed>: SELECT * FROM test1 WHERE i = $1::int4
DETAIL: parameters: $1 = '2'
and log_min_duration_statement = 0 results in
LOG: duration: 2.431 ms parse <unnamed>: SELECT * FROM test1 WHERE t = $1
LOG: duration: 2.335 ms bind <unnamed> to <unnamed>: SELECT * FROM test1 WHERE t = $1
DETAIL: parameters: $1 = 'joe''s place'
LOG: duration: 0.394 ms execute <unnamed>: SELECT * FROM test1 WHERE t = $1
DETAIL: parameters: $1 = 'joe''s place'
LOG: duration: 1.251 ms parse <unnamed>: SELECT * FROM test1 WHERE i = $1::int4
LOG: duration: 0.566 ms bind <unnamed> to <unnamed>: SELECT * FROM test1 WHERE i = $1::int4
DETAIL: parameters: $1 = '2'
LOG: duration: 0.173 ms execute <unnamed>: SELECT * FROM test1 WHERE i = $1::int4
DETAIL: parameters: $1 = '2'
(This example demonstrates the folly of ignoring parse/bind steps for duration
logging purposes, BTW.)
Along the way, create a less ad-hoc mechanism for determining which commands
are logged by log_statement = mod and log_statement = ddl. The former coding
was actually missing quite a few things that look like ddl to me, and it
did not handle EXECUTE or extended query protocol correctly at all.
This commit does not do anything about the question of whether log_duration
should be removed or made less redundant with log_min_duration_statement.
can create or modify rules for the table. Do setRuleCheckAsUser() while
loading rules into the relcache, rather than when defining a rule. This
ensures that permission checks for tables referenced in a rule are done with
respect to the current owner of the rule's table, whereas formerly ALTER TABLE
OWNER would fail to update the permission checking for associated rules.
Removal of separate RULE privilege is needed to prevent various scenarios
in which a grantee of RULE privilege could effectively have any privilege
of the table owner. For backwards compatibility, GRANT/REVOKE RULE is still
accepted, but it doesn't do anything. Per discussion here:
http://archives.postgresql.org/pgsql-hackers/2006-04/msg01138.php
PGPROC array into snapshots, and use this information to avoid visits
to pg_subtrans in HeapTupleSatisfiesSnapshot. This appears to solve
the pg_subtrans-related context swap storm problem that's been reported
by several people for 8.1. While at it, modify GetSnapshotData to not
take an exclusive lock on ProcArrayLock, as closer analysis shows that
shared lock is always sufficient.
Itagaki Takahiro and Tom Lane
optionally bind. I re-added the "statement:" label so people will
understand why the line is being printed (it is log_*statement
behavior).
Use single quotes for bind values, instead of double quotes, and double
literal single quotes in bind values (and document that). I also made
use of the DETAIL line to have much cleaner output.
cannot assume that there's exactly one Query in the Portal, as we can for
ONE_SELECT mode, because non-SELECT queries might have extra queries added
during rule rewrites. Fix things up so that we'll use ONE_RETURNING mode
when a Portal contains one primary (canSetTag) query and that query has
a RETURNING list. This appears to be a second showstopper reason for running
the Portal to completion before we start to hand anything back --- we want
to be sure that the rule-added queries get run too.
plpgsql support to come later. Along the way, convert execMain's
SELECT INTO support into a DestReceiver, in order to eliminate some ugly
special cases.
Jonah Harris and Tom Lane
The main reason for refactoring was that set_config_option() was too
overloaded function and its behavior did not consistent. Old version of
set_config_function hides some messages. For example if you type:
tcp_port = 5432.1
then old implementation ignore this error without any message to log
file in the signal context (configuration reload). Main problem was that
semantic analysis of postgresql.conf is not perform in the
ProcessConfigFile function, but in the set_config_options *after*
context check. This skipped check for variables with PG_POSTMASTER
context. There was request from Joachim Wieland to add more messages
about ignored changes in the config file as well.
Zdenek Kotala
o print user name for all
o print portal name if defined for all
o print query for all
o reduce log_statement header to single keyword
o print bind parameters as DETAIL if text mode
(table or index) before trying to open its relcache entry. This fixes
race conditions in which someone else commits a change to the relation's
catalog entries while we are in process of doing relcache load. Problems
of that ilk have been reported sporadically for years, but it was not
really practical to fix until recently --- for instance, the recent
addition of WAL-log support for in-place updates helped.
Along the way, remove pg_am.amconcurrent: all AMs are now expected to support
concurrent update.
it's handled just about like timezone; in particular, don't try
to read anything during InitializeGUCOptions. Should solve current
startup failure on Windows, and avoid wasted cycles if a nondefault
setting is specified in postgresql.conf too. Possibly we need to
think about a more general solution for handling 'expensive to set'
GUC options.
the float8 versions of the aggregates, which is all that the standard requires.
Sergey's original patch also provided versions using numeric arithmetic,
but given the size and slowness of the code, I doubt we ought to include
those in core.
configuration files that can be altered by a DBA. The australian_timezones
GUC setting disappears, replaced by a timezone_abbreviations setting (set this
to 'Australia' to get the effect of australian_timezones). The list of zone
names defined by default has undergone a bit of cleanup, too. Documentation
still needs some work --- in particular, should we fix Table B-4, or just get
rid of it? Joachim Wieland, with some editorializing by moi.
to the low-order bits of the entry hash value. Also make some incidental
cleanups in the dynahash API, such as not exporting the hash header
structs to the world.
opclass. This is not so much because anyone's likely to create an index
on TID, as that sorting TIDs can be useful. Also added max and min
aggregates while at it, so that one can investigate the clusteredness of
a table with queries like SELECT min(ctid), max(ctid) FROM tab WHERE ...
Greg Stark and Tom Lane
discussion (including making def_arg allow reserved words), add missed
opt_definition for UNIQUE case. Put the reloptions support code in a less
random place (I chose to make a new file access/common/reloptions.c).
Eliminate header inclusion creep. Make the index options functions safely
user-callable (seems like client apps might like to be able to test validity
of options before trying to make an index). Reduce overhead for normal case
with no options by allowing rd_options to be NULL. Fix some unmaintainably
klugy code, including getting rid of Natts_pg_class_fixed at long last.
Some stylistic cleanup too, and pay attention to keeping comments in sync
with code.
Documentation still needs work, though I did fix the omissions in
catalogs.sgml and indexam.sgml.
ScalarArrayOpExpr index quals: we were estimating the right total
number of rows returned, but treating the index-access part of the
cost as if a single scan were fetching that many consecutive index
tuples. Actually we should treat it as a multiple indexscan, and
if there are enough of 'em the Mackert-Lohman discount should kick in.
per-tuple space overhead for sorts in memory. I chose to replace the
previous patch that tried to write out the bare minimum amount of data
when sorting on disk; instead, just dump the MinimalTuples as-is. This
wastes 3 to 10 bytes per tuple depending on architecture and null-bitmap
length, but the simplification in the writetup/readtup routines seems
worth it.
tuples with less header overhead than a regular HeapTuple, per my
recent proposal. Teach TupleTableSlot code how to deal with these.
As proof of concept, change tuplestore.c to store MinimalTuples instead
of HeapTuples. Future patches will expand the concept to other places
where it is useful.
palloc() will normally round allocation requests up to the next power of 2,
so make dynahash choose allocation sizes that are as close to a power of 2
as possible.
Back-patch to 8.1 --- the problem exists further back, but a much larger
patch would be needed and it doesn't seem worth taking any risks.
changing semantics too much. statement_timestamp is now set immediately
upon receipt of a client command message, and the various places that used
to do their own gettimeofday() calls to mark command startup are referenced
to that instead. I have also made stats_command_string use that same
value for pg_stat_activity.query_start for both the command itself and
its eventual replacement by <IDLE> or <idle in transaction>. There was
some debate about that, but no argument that seemed convincing enough to
justify an extra gettimeofday() call.
by creating a reference-count mechanism, similar to what we did a long time
ago for catcache entries. The back branches have an ugly solution involving
lots of extra copies, but this way is more efficient. Reference counting is
only applied to tupdescs that are actually in caches --- there seems no need
to use it for tupdescs that are generated in the executor, since they'll go
away during plan shutdown by virtue of being in the per-query memory context.
Neil Conway and Tom Lane
remove the infrastructure needed to enforce the limit, ie, the global
LRU list of cache entries. On small-to-middling databases this wins
because maintaining the LRU list is a waste of time. On large databases
this wins because it's better to keep more cache entries (we assume
such users can afford to use some more per-backend memory than was
contemplated in the Berkeley-era catcache design). This provides a
noticeable improvement in the speed of psql \d on a 10000-table
database, though it doesn't make it instantaneous.
While at it, use per-catcache settings for the number of hash buckets
per catcache, rather than the former one-size-fits-all value. It's a
bit silly to be using the same number of hash buckets for, eg, pg_am
and pg_attribute. The specific values I used might need some tuning,
but they seem to be in the right ballpark based on CATCACHE_STATS
results from the standard regression tests.
and transaction visibility fields of tuples being sorted. These are
always uninteresting in a tuple being sorted (if the fields were actually
selected, they'd have been pulled out into user columns beforehand).
This saves about 24 bytes per row being sorted, which is a useful savings
for any but the widest of sort rows. Per recent discussion.
throw warnings for 100%-SQL-standard constructs, clean up some minor
infelicities, try to un-break ecpg to the best of my ability. (It's not clear
how ecpg is going to find out the setting of standard_conforming_strings,
though.) I think pg_dump still needs work, too.
it's not necessary to have three separate calls anymore. This patch also
fixes things so we don't try to read pg_internal.init until after we've
obtained lock on the target database; which was fairly harmless, but it's
certainly cleaner this way.
in various places that were previously doing ad hoc pg_database searches.
This may speed up database-related privilege checks a little bit, but
the main motivation is to eliminate the performance reason for having
ReverifyMyDatabase do such a lot of stuff (viz, avoiding repeat scans
of pg_database during backend startup). The locking reason for having
that routine is about to go away, and it'd be good to have the option
to break it up.
cases. This was not needed in the existing uses within selfuncs.c, but if
we're gonna export it for general use, the extra generality seems helpful.
Motivated by looking at ltree example.
thereby saving a visit to the metapage in most index searches/updates.
This wouldn't actually save any I/O (since in the old regime the metapage
generally stayed in cache anyway), but it does provide a useful decrease
in bufmgr traffic in high-contention scenarios. Per my recent proposal.
transaction_timestamp() (just like now()).
Also update statement_timeout() to mention it is statement arrival time
that is measured.
Catalog version updated.
when trying to locate the referent of a RECORD variable. This fixes the
'record type has not been registered' failure reported by Stefan
Kaltenbrunner about a month ago. A side effect of the way I chose to
fix it is that most variable references in join conditions will now be
properly labeled with the variable's source table name, instead of the
not-too-helpful 'outer' or 'inner' we used to use.
that apply the necessary domain constraint checks immediately. This fixes
cases where domain constraints went unchecked for statement parameters,
PL function local variables and results, etc. We can also eliminate existing
special cases for domains in places that had gotten it right, eg COPY.
Also, allow domains over domains (base of a domain is another domain type).
This almost worked before, but was disallowed because the original patch
hadn't gotten it quite right.
var_samp(), stddev_pop(), and stddev_samp(). var_samp() and stddev_samp()
are just renamings of the historical Postgres aggregates variance() and
stddev() -- the latter names have been kept for backward compatibility.
This patch includes updates for the documentation and regression tests.
The catversion has been bumped.
NB: SQL2003 requires that DISTINCT not be specified for any of these
aggregates. Per discussion on -patches, I have NOT implemented this
restriction: if the user asks for stddev(DISTINCT x), presumably they
know what they are doing.
we are doing the final merge pass on-the-fly, and not writing the data
back onto a 'tape', the number of free blocks in the tape set will become
large, leading to a lot of time wasted in ltsReleaseBlock(). There is
really no need to track the free blocks anymore in this state, so add a
simple shutoff switch. Per report from Stefan Kaltenbrunner.
- new function justify_interval(interval)
- modified function justify_hours(interval)
- modified function justify_days(interval)
These functions are defined to meet the requirements as discussed in
this thread. Specifically:
- justify_hours makes certain the sign bit on the hours
matches the sign bit on the days. It only checks the
sign bit on the days, and not the months, when
determining if the hours should be positive or negative.
After the call, -24 < hours < 24.
- justify_days makes certain the sign bit on the days
matches the sign bit on the months. It's behavior does
not depend on the hours, nor does it modify the hours.
After the call, -30 < days < 30.
- justify_interval makes sure the sign bits on all three
fields months, days, and hours are all the same. After
the call, -24 < hours < 24 AND -30 < days < 30.
Mark Dilger
