making pull_up_sublinks() construct a full-blown JoinExpr tree representation
of IN/EXISTS SubLinks that it is able to convert to semi or anti joins.
This makes pull_up_sublinks() a shade more complex, but the gain in semantic
clarity is worth it. I still have more to do in this area to address the
previously-discussed problems, but this commit in itself fixes at least one
bug in HEAD, as shown by added regression test case.
that are set up for execution with ExecPrepareExpr rather than going through
the full planner process. By introducing an explicit notion of "expression
planning", this patch also lays a bit of groundwork for maybe someday
allowing sub-selects in standalone expressions.
the default. This setting enables constraint exclusion checks only for
appendrel members (ie, inheritance children and UNION ALL arms), which are
the cases in which constraint exclusion is most likely to be useful. Avoiding
the overhead for simple queries that are unlikely to benefit should bring
the cost down to the point where this is a reasonable default setting.
Per today's discussion.
patch. This includes the ability to force the frame to cover the whole
partition, and the ability to make the frame end exactly on the current row
rather than its last ORDER BY peer. Supporting any more of the full SQL
frame-clause syntax will require nontrivial hacking on the window aggregate
code, so it'll have to wait for 8.5 or beyond.
we extended the appendrel mechanism to support UNION ALL optimization. The
reason nobody noticed was that we are not actually using attr_needed data for
appendrel children; hence it seems more reasonable to rip it out than fix it.
Back-patch to 8.2 because an Assert failure is possible in corner cases.
Per examination of an example from Jim Nasby.
In HEAD, also get rid of AppendRelInfo.col_mappings, which is quite inadequate
to represent UNION ALL situations; depend entirely on translated_vars instead.
that represent some expression that we desire to compute below the top level
of the plan, and then let that value "bubble up" as though it were a plain
Var (ie, a column value).
The immediate application is to allow sub-selects to be flattened even when
they are below an outer join and have non-nullable output expressions.
Formerly we couldn't flatten because such an expression wouldn't properly
go to NULL when evaluated above the outer join. Now, we wrap it in a
PlaceHolderVar and arrange for the actual evaluation to occur below the outer
join. When the resulting Var bubbles up through the join, it will be set to
NULL if necessary, yielding the correct results. This fixes a planner
limitation that's existed since 7.1.
In future we might want to use this mechanism to re-introduce some form of
Hellerstein's "expensive functions" optimization, ie place the evaluation of
an expensive function at the most suitable point in the plan tree.
implementation uses an in-memory hash table, so it will poop out for very
large recursive results ... but the performance characteristics of a
sort-based implementation would be pretty unpleasant too.
There are some unimplemented aspects: recursive queries must use UNION ALL
(should allow UNION too), and we don't have SEARCH or CYCLE clauses.
These might or might not get done for 8.4, but even without them it's a
pretty useful feature.
There are also a couple of small loose ends and definitional quibbles,
which I'll send a memo about to pgsql-hackers shortly. But let's land
the patch now so we can get on with other development.
Yoshiyuki Asaba, with lots of help from Tatsuo Ishii and Tom Lane
when user-defined functions used in a plan are modified. Also invalidate
plans when schemas, operators, or operator classes are modified; but for these
cases we just invalidate everything rather than tracking exact dependencies,
since these types of objects seldom change in a production database.
Tom Lane; loosely based on a patch by Martin Pihlak.
into nodes/nodeFuncs, so as to reduce wanton cross-subsystem #includes inside
the backend. There's probably more that should be done along this line,
but this is a start anyway.
subqueries into the same thing you'd have gotten from IN (except always with
unknownEqFalse = true, so as to get the proper semantics for an EXISTS).
I believe this fixes the last case within CVS HEAD in which an EXISTS could
give worse performance than an equivalent IN subquery.
The tricky part of this is that if the upper query probes the EXISTS for only
a few rows, the hashing implementation can actually be worse than the default,
and therefore we need to make a cost-based decision about which way to use.
But at the time when the planner generates plans for subqueries, it doesn't
really know how many times the subquery will be executed. The least invasive
solution seems to be to generate both plans and postpone the choice until
execution. Therefore, in a query that has been optimized this way, EXPLAIN
will show two subplans for the EXISTS, of which only one will actually get
executed.
There is a lot more that could be done based on this infrastructure: in
particular it's interesting to consider switching to the hash plan if we start
out using the non-hashed plan but find a lot more upper rows going by than we
expected. I have therefore left some minor inefficiencies in place, such as
initializing both subplans even though we will currently only use one.
level of a JOIN/ON clause, not only at top level of WHERE. (However, we
can't do this in an outer join's ON clause, unless the ANY/EXISTS refers
only to the nullable side of the outer join, so that it can effectively
be pushed down into the nullable side.) Per request from Kevin Grittner.
In passing, fix a bug in the initial implementation of EXISTS pullup:
it would Assert if the EXIST's WHERE clause used a join alias variable.
Since we haven't yet flattened join aliases when this transformation
happens, it's necessary to include join relids in the computed set of
RHS relids.
and anti joins. To do this, pass the SpecialJoinInfo struct for the current
join as an additional optional argument to operator join selectivity
estimation functions. This allows the estimator to tell not only what kind
of join is being formed, but which variable is on which side of the join;
a requirement long recognized but not dealt with till now. This also leaves
the door open for future improvements in the estimators, such as accounting
for the null-insertion effects of lower outer joins. I didn't do anything
about that in the current patch but the information is in principle deducible
from what's passed.
The patch also clarifies the definition of join selectivity for semi/anti
joins: it's the fraction of the left input that has (at least one) match
in the right input. This allows getting rid of some very fuzzy thinking
that I had committed in the original 7.4-era IN-optimization patch.
There's probably room to estimate this better than the present patch does,
but at least we know what to estimate.
Since I had to touch CREATE OPERATOR anyway to allow a variant signature
for join estimator functions, I took the opportunity to add a couple of
additional checks that were missing, per my recent message to -hackers:
* Check that estimator functions return float8;
* Require execute permission at the time of CREATE OPERATOR on the
operator's function as well as the estimator functions;
* Require ownership of any pre-existing operator that's modified by
the command.
I also moved the lookup of the functions out of OperatorCreate() and
into operatorcmds.c, since that seemed more consistent with most of
the other catalog object creation processes, eg CREATE TYPE.
the old JOIN_IN code, but antijoins are new functionality.) Teach the planner
to convert appropriate EXISTS and NOT EXISTS subqueries into semi and anti
joins respectively. Also, LEFT JOINs with suitable upper-level IS NULL
filters are recognized as being anti joins. Unify the InClauseInfo and
OuterJoinInfo infrastructure into "SpecialJoinInfo". With that change,
it becomes possible to associate a SpecialJoinInfo with every join attempt,
which permits some cleanup of join selectivity estimation. That needs to be
taken much further than this patch does, but the next step is to change the
API for oprjoin selectivity functions, which seems like material for a
separate patch. So for the moment the output size estimates for semi and
especially anti joins are quite bogus.
hashtable entries for tuples that are found only in the second input: they
can never contribute to the output. Furthermore, this implies that the
planner should endeavor to put first the smaller (in number of groups) input
relation for an INTERSECT. Implement that, and upgrade prepunion's estimation
of the number of rows returned by setops so that there's some amount of sanity
in the estimate of which one is smaller.
This completes my project of improving usage of hashing for duplicate
elimination (aggregate functions with DISTINCT remain undone, but that's
for some other day).
As with the previous patches, this means we can INTERSECT/EXCEPT on datatypes
that can hash but not sort, and it means that INTERSECT/EXCEPT without ORDER
BY are no longer certain to produce sorted output.
but seem like a separate patch since most of the remaining work is on the
executor side.) I took the opportunity to push selection of the grouping
operators for set operations into the parser where it belongs. Otherwise this
is just a small exercise in making prepunion.c consider both alternatives.
As with the recent DISTINCT patch, this means we can UNION on datatypes that
can hash but not sort, and it means that UNION without ORDER BY is no longer
certain to produce sorted output.
as per my recent proposal:
1. Fold SortClause and GroupClause into a single node type SortGroupClause.
We were already relying on them to be struct-equivalent, so using two node
tags wasn't accomplishing much except to get in the way of comparing items
with equal().
2. Add an "eqop" field to SortGroupClause to carry the associated equality
operator. This is cheap for the parser to get at the same time it's looking
up the sort operator, and storing it eliminates the need for repeated
not-so-cheap lookups during planning. In future this will also let us
represent GROUP/DISTINCT operations on datatypes that have hash opclasses
but no btree opclasses (ie, they have equality but no natural sort order).
The previous representation simply didn't work for that, since its only
indicator of comparison semantics was a sort operator.
3. Add a hasDistinctOn boolean to struct Query to explicitly record whether
the distinctClause came from DISTINCT or DISTINCT ON. This allows removing
some complicated and not 100% bulletproof code that attempted to figure
that out from the distinctClause alone.
This patch doesn't in itself create any new capability, but it's necessary
infrastructure for future attempts to use hash-based grouping for DISTINCT
and UNION/INTERSECT/EXCEPT.
the current query level that aren't in fact output parameters of the current
initPlans. (This means, for example, output parameters of regular subplans.)
To make this work correctly for output parameters coming from sibling
initplans requires rejiggering the API of SS_finalize_plan just a bit:
we need the siblings to be visible to it, rather than hidden as
SS_make_initplan_from_plan had been doing. This is really part of my response
to bug #4290, but I concluded this part probably shouldn't be back-patched,
since all that it's doing is to make a debugging cross-check tighter.
corresponding struct definitions. This allows other headers to avoid including
certain highly-loaded headers such as rel.h and relscan.h, instead using just
relcache.h, heapam.h or genam.h, which are more lightweight and thus cause less
unnecessary dependencies.
we had several code paths where a physical tlist could be used for the input
to a Sort node, which is a dumb idea because any unneeded table columns will
increase the volume of data the sort has to push around.
(Unfortunately the easy-looking fix of calling disuse_physical_tlist during
make_sort_xxx doesn't work because in most cases we're already committed to
the current input tlist --- it's been marked with sort column numbers, or
we've built grouping column numbers using it, etc. The tlist has to be
selected properly at the calling level before we start constructing sort-col
information. This is easy enough to do, we were just failing to take the
point into consideration.)
Back-patch to 8.3. I believe the problem probably exists clear back to 7.4
when the physical tlist optimization was added, but I'm afraid to back-patch
further than 8.3 without a great deal more study than I want to put into it.
The code in this area has drifted a lot over time. The real-world importance
of these code paths is uncertain anyway --- I think in many cases we'd
probably prefer hash-based methods.
eval_const_expressions needs to be passed the PlannerInfo ("root") structure,
because in some cases we want it to substitute values for Param nodes.
(So "constant" is not so constant as all that ...) This mistake partially
disabled optimization of unnamed extended-Query statements in 8.3: in
particular the LIKE-to-indexscan optimization would never be applied if the
LIKE pattern was passed as a parameter, and constraint exclusion depending
on a parameter value didn't work either.
are declared to return set, and consist of just a single SELECT. We
can replace the FROM-item with a sub-SELECT and then optimize much as
if we were dealing with a view. Patch from Richard Rowell, cleaned up
by me.
two buckets at the start, we create a number of buckets appropriate for the
estimated size of the table. This avoids a lot of expensive bucket-split
actions during initial index build on an already-populated table.
This is one of the two core ideas of Tom Raney and Shreya Bhargava's patch
to reduce hash index build time. I'm committing it separately to make it
easier for people to test the effects of this separately from the effects
of their other core idea (pre-sorting the index entries by bucket number).
predictable manner; in particular that if you say ORDER BY output-column-ref,
it will in fact sort by that specific column even if there are multiple
syntactic matches. An example is
SELECT random() AS a, random() AS b FROM ... ORDER BY b, a;
While the use-case for this might be a bit debatable, it worked as expected
in earlier releases, so we should preserve the behavior for 8.3. Per my
recent proposal.
While at it, fix convert_subquery_pathkeys() to handle RelabelType stripping
in both directions; it needs this for the same reasons make_sort_from_pathkeys
does.
to be able to discard top-level RelabelType nodes on *both* sides of the
equivalence-class-to-target-list comparison, since make_pathkey_from_sortinfo
might either add or remove a RelabelType. Also fix the latter to do the
removal case cleanly. Per example from Peter.
a relation as a reason to invalidate a plan when the relation changes. This
handles scenarios such as dropping/recreating a sequence that is referenced by
nextval('seq') in a cached plan. Rather than teach plancache.c all about
digging through plan trees to find regclass Consts, we charge the planner's
setrefs.c with making a list of the relation OIDs on which each plan depends.
That way the list can be built cheaply during a plan tree traversal that has
to happen anyway. Per bug #3662 and subsequent discussion.
eval_const_expressions simplifies this to just "WHERE false", but we have
already done pull_up_IN_clauses so the IN join will be done, or at least
planned, anyway. The trouble case comes when the sub-SELECT is itself a join
and we decide to implement the IN by unique-ifying the sub-SELECT outputs:
with no remaining reference to the output Vars in WHERE, we won't have
propagated the Vars up to the upper join point, leading to "variable not found
in subplan target lists" error. Fix by adding an extra scan of in_info_list
and forcing all Vars mentioned therein to be propagated up to the IN join
point. Per bug report from Miroslav Sulc.
join search order portion of the planner; this is specifically intended to
simplify developing a replacement for GEQO planning. Patch by Julius
Stroffek, editorialized on by me. I renamed make_one_rel_by_joins to
standard_join_search and make_rels_by_joins to join_search_one_level to better
reflect their place within this scheme.
(because they are uncorrelated with the immediate parent query). We were
charging the full run cost to the parent node, disregarding the fact that
only one row need be fetched for EXISTS. While this would only be a
cosmetic issue in most cases, it might possibly affect planning outcomes
if the parent query were itself a subquery to some upper query.
Per recent discussion with Steve Crawford.
columns, and the new version can be stored on the same heap page, we no longer
generate extra index entries for the new version. Instead, index searches
follow the HOT-chain links to ensure they find the correct tuple version.
In addition, this patch introduces the ability to "prune" dead tuples on a
per-page basis, without having to do a complete VACUUM pass to recover space.
VACUUM is still needed to clean up dead index entries, however.
Pavan Deolasee, with help from a bunch of other people.
and/or create plans for hypothetical situations; in particular, investigate
plans that would be generated using hypothetical indexes. This is a
heavily-rewritten version of the hooks proposed by Gurjeet Singh for his
Index Advisor project. In this formulation, the index advisor can be
entirely a loadable module instead of requiring a significant part to be
in the core backend, and plans can be generated for hypothetical indexes
without requiring the creation and rolling-back of system catalog entries.
The index advisor patch as-submitted is not compatible with these hooks,
but it needs significant work anyway due to other 8.2-to-8.3 planner
changes. With these hooks in the core backend, development of the advisor
can proceed as a pgfoundry project.
cheapest-startup-cost innerjoin indexscans, and make joinpath.c consider
both of these (when different) as the inside of a nestloop join. The
original design was based on the assumption that indexscan paths always
have negligible startup cost, and so total cost is the only important
figure of merit; an assumption that's obviously broken by bitmap
indexscans. This oversight could lead to choosing poor plans in cases
where fast-start behavior is more important than total cost, such as
LIMIT and IN queries. 8.1-vintage brain fade exposed by an example from
Chuck D.
is using mark/restore but not rewind or backward-scan capability. Insert a
materialize plan node between a mergejoin and its inner child if the inner
child is a sort that is expected to spill to disk. The materialize shields
the sort from the need to do mark/restore and thereby allows it to perform
its final merge pass on-the-fly; while the materialize itself is normally
cheap since it won't spill to disk unless the number of tuples with equal
key values exceeds work_mem.
Greg Stark, with some kibitzing from Tom Lane.
need be returned. We keep a heap of the current best N tuples and sift-up
new tuples into it as we scan the input. For M input tuples this means
only about M*log(N) comparisons instead of M*log(M), not to mention a lot
less workspace when N is small --- avoiding spill-to-disk for large M
is actually the most attractive thing about it. Patch includes planner
and executor support for invoking this facility in ORDER BY ... LIMIT
queries. Greg Stark, with some editorialization by moi.
access to the planner's cursor-related planning options, and provide new
FETCH/MOVE routines that allow access to the full power of those commands.
Small refactoring of planner(), pg_plan_query(), and pg_plan_queries()
APIs to make it convenient to pass the planning options down from SPI.
This is the core-code portion of Pavel Stehule's patch for scrollable
cursor support in plpgsql; I'll review and apply the plpgsql changes
separately.
possibly be any useful pathkeys --- to wit, queries with neither any
join clauses nor any ORDER BY request. It's nearly free to check for
this case and it saves a useful fraction of the planning time for simple
queries.
useless substructure for its RangeTblEntry nodes. (I chose to keep using the
same struct node type and just zero out the link fields for unneeded info,
rather than making a separate ExecRangeTblEntry type --- it seemed too
fragile to have two different rangetable representations.)
Along the way, put subplans into a list in the toplevel PlannedStmt node,
and have SubPlan nodes refer to them by list index instead of direct pointers.
Vadim wanted to do that years ago, but I never understood what he was on about
until now. It makes things a *whole* lot more robust, because we can stop
worrying about duplicate processing of subplans during expression tree
traversals. That's been a constant source of bugs, and it's finally gone.
There are some consequent simplifications yet to be made, like not using
a separate EState for subplans in the executor, but I'll tackle that later.
storing mostly-redundant Query trees in prepared statements, portals, etc.
To replace Query, a new node type called PlannedStmt is inserted by the
planner at the top of a completed plan tree; this carries just the fields of
Query that are still needed at runtime. The statement lists kept in portals
etc. now consist of intermixed PlannedStmt and bare utility-statement nodes
--- no Query. This incidentally allows us to remove some fields from Query
and Plan nodes that shouldn't have been there in the first place.
Still to do: simplify the execution-time range table; at the moment the
range table passed to the executor still contains Query trees for subqueries.
initdb forced due to change of stored rules.
this code was last gone over, there wasn't really any alternative to
globals because we didn't have the PlannerInfo struct being passed all
through the planner code. Now that we do, we can restructure things
to avoid non-reentrancy. I'm fooling with this because otherwise I'd
have had to add another global variable for the planned compact
range table list.
