When stdin is a terminal, it's possible to end a COPY FROM STDIN with
a keyboard EOF signal (typically control-D), and then keep on issuing
SQL commands. One would expect another COPY FROM STDIN to work as well,
but on some platforms it did not. This turns out to be because we were
not resetting the stream's feof() flag, and BSD-ish versions of fread()
and fgets() won't attempt to read more data if that's set.
The misbehavior is observed on BSDen (including macOS), but not Linux,
Windows, or SysV-ish Unixen, which makes this a portability bug not
just a missing feature.
Add a clearerr() call to fix the behavior, and improve the prompt that's
issued when copying from a TTY to mention that EOF signals work.
It's been like this forever, so back-patch to all supported branches.
Thomas Munro
Discussion: https://postgr.es/m/CAEepm=0MCGfYf=JAMiYhO6JPtv9-3ZfBo8fcGeCZ8oMzaw+Z+Q@mail.gmail.com
The POSIX standard does not say that the success return value for
fcntl(F_SETFD) and fcntl(F_SETFL) is zero; it says only that it's not -1.
We had several calls that were making the stronger assumption. Adjust
them to test specifically for -1 for strict spec compliance.
The standard further leaves open the possibility that the O_NONBLOCK
flag bit is not the only active one in F_SETFL's argument. Formally,
therefore, one ought to get the current flags with F_GETFL and store
them back with only the O_NONBLOCK bit changed when trying to change
the nonblock state. In port/noblock.c, we were doing the full pushup
in pg_set_block but not in pg_set_noblock, which is just weird. Make
both of them do it properly, since they have little business making
any assumptions about the socket they're handed. The other places
where we're issuing F_SETFL are working with FDs we just got from
pipe(2), so it's reasonable to assume the FDs' properties are all
default, so I didn't bother adding F_GETFL steps there.
Also, while pg_set_block deserves some points for trying to do things
right, somebody had decided that it'd be even better to cast fcntl's
third argument to "long". Which is completely loony, because POSIX
clearly says the third argument for an F_SETFL call is "int".
Given the lack of field complaints, these missteps apparently are not
of significance on any common platforms. But they're still wrong,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/30882.1492800880@sss.pgh.pa.us
This backpatches 51e26c9 and 7220c7b, including both documentation
updates clarifying the checkpoints at the beginning of base backups and
the messages in verbose and progress mdoe of pg_basebackup.
Author: Michael Banck
Discussion: https://postgr.es/m/21444.1488142764%40sss.pgh.pa.us
We were assigning values near 255 through "char *" pointers. On machines
where char is signed, that's not entirely kosher, and it's reasonable
for compilers to warn about it.
A better solution would be to change the pointer type to "unsigned char *",
but that would be vastly more invasive. For the moment, let's just apply
this simple backpatchable solution.
Aleksander Alekseev
Discussion: https://postgr.es/m/20170220141239.GD12278@e733.localdomain
Discussion: https://postgr.es/m/2839.1490714708@sss.pgh.pa.us
Commits 89e0bac86 et al replaced newlines with spaces in object names
printed in SQL comments, but we neglected to consider that the same
names are also printed by "pg_restore -l", and a newline would render
the output unparseable by "pg_restore -L". Apply the same replacement
in "-l" output. Since "pg_restore -L" doesn't actually examine any
object names, only the dump ID field that starts each line, this is
enough to fix things for its purposes.
The previous fix was treated as a security issue, and we might have
done that here as well, except that the issue was reported publicly
to start with. Anyway it's hard to see how this could be exploited
for SQL injection; "pg_restore -L" doesn't do much with the file
except parse it for leading integers.
Per bug #14587 from Milos Urbanek. Back-patch to all supported versions.
Discussion: https://postgr.es/m/20170310155318.1425.30483@wrigleys.postgresql.org
We attached no schema label to comments for procedural languages, casts,
transforms, operator classes, operator families, or text search objects.
The first three categories of objects don't really have schemas, but
pg_dump treats them as if they do, and it seems like the TocEntry fields
for their comments had better match the TocEntry fields for the parent
objects. (As an example of a possible hazard, the type names in a CAST
will be formatted with the assumption of a particular search_path, so
failing to ensure that this same path is active for the COMMENT ON command
could lead to an error or to attaching the comment to the wrong cast.)
In the last six cases, this was a flat-out error --- possibly mine to
begin with, but it was a long time ago.
The security label for a procedural language was likewise not correctly
labeled as to schema, and both the comment and security label for a
procedural language were not correctly labeled as to owner.
In simple cases the restore would accidentally work correctly anyway, since
these comments and security labels would normally get emitted right after
the owning object, and so the search path and active user would be correct
anyhow. But it could fail in corner cases; for example a schema-selective
restore would omit comments it should include.
Giuseppe Broccolo noted the oversight, and proposed the correct fix, for
text search dictionary objects; I found the rest by cross-checking other
dumpComment() calls. These oversights are ancient, so back-patch all
the way.
Discussion: https://postgr.es/m/CAFzmHiWwwzLjzwM4x5ki5s_PDMR6NrkipZkjNnO3B0xEpBgJaA@mail.gmail.com
When performing a pg_upgrade, we copy the files behind pg_largeobject
and pg_largeobject_metadata, allowing us to avoid having to dump out and
reload the actual data for large objects and their ACLs.
Unfortunately, that isn't all of the information which can be associated
with large objects. Currently, we also support COMMENTs and SECURITY
LABELs with large objects and these were being silently dropped during a
pg_upgrade as pg_dump would skip everything having to do with a large
object and pg_upgrade only copied the tables mentioned to the new
cluster.
As the file copies happen after the catalog dump and reload, we can't
simply include the COMMENTs and SECURITY LABELs in pg_dump's binary-mode
output but we also have to include the actual large object definition as
well. With the definition, comments, and security labels in the pg_dump
output and the file copies performed by pg_upgrade, all of the data and
metadata associated with large objects is able to be successfully pulled
forward across a pg_upgrade.
In 9.6 and master, we can simply adjust the dump bitmask to indicate
which components we don't want. In 9.5 and earlier, we have to put
explciit checks in in dumpBlob() and dumpBlobs() to not include the ACL
or the data when in binary-upgrade mode.
Adjustments made to the privileges regression test to allow another test
(large_object.sql) to be added which explicitly leaves a large object
with a comment in place to provide coverage of that case with
pg_upgrade.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/20170221162655.GE9812@tamriel.snowman.net
The recovery.conf file that's generated is specifically for
replication, and not needed (or wanted) for regular backup restore, so
indicate that in the message.
In 9.5, the default pg_ctl stop mode was changed from "smart" to "fast".
pg_upgrade still thought the default mode was "smart" and only specified
the mode when "fast" was asked for. This results in using "fast" all
the time. It's not clear what the effect in practice is, but fix it
nonetheless to restore the previous behavior.
pg_restore will currently accept invalid values for the number of
parallel jobs to run (eg: -1), unlike pg_dump which does check that the
value provided is reasonable.
Worse, '-1' is actually a valid, independent, parameter (as an alias for
--single-transaction), leading to potentially completely unexpected
results from a command line such as:
-> pg_restore -j -1
Where a user would get neither parallel jobs nor a single-transaction.
Add in validity checking of the parallel jobs option, as we already have
in pg_dump, before we try to open up the archive. Also move the check
that we haven't been asked to run more parallel jobs than possible on
Windows to the same place, so we do all the option validity checking
before opening the archive.
Back-patch all the way, though for 9.2 we're adding the Windows-specific
check against MAXIMUM_WAIT_OBJECTS as that check wasn't back-patched
originally.
Discussion: https://www.postgresql.org/message-id/20170110044815.GC18360%40tamriel.snowman.net
Including the program name twice is not helpful:
-> pg_dump -j -1
pg_dump: pg_dump: invalid number of parallel jobs
Correct by removing the progname from the exit_horribly() call used when
validating the number of parallel jobs.
Noticed while testing various pg_dump error cases.
Back-patch to 9.3 where parallel pg_dump was added.
The -v/--verbose option was not included in the output from --help for
pg_dumpall even though it's in the pg_dumpall documentation and has
apparently been around since pg_dumpall was reimplemented in C in 2002.
Fix that by adding it.
Pointed out by Daniel Westermann.
Back-patch to all supported branches.
Discussion: https://www.postgresql.org/message-id/2020970042.4589542.1482482101585.JavaMail.zimbra%40dbi-services.com
When providing tab completion for ALTER DEFAULT PRIVILEGES, we are
including the list of roles as possible options for completion after the
GRANT or REVOKE. Further, we accept FOR ROLE/IN SCHEMA at the same time
and in either order, but the tab completion was only working for one or
the other. Lastly, we weren't using the actual list of allowed kinds of
objects for default privileges for completion after the 'GRANT X ON' but
instead were completeing to what 'GRANT X ON' supports, which isn't the
ssame at all.
Address these issues by improving the forward tab-completion for ALTER
DEFAULT PRIVILEGES and then constrain and correct how the tail
completion is done when it is for ALTER DEFAULT PRIVILEGES.
Back-patch the forward/tail tab-completion to 9.6, where we made it easy
to handle such cases.
For 9.5 and earlier, correct the initial tab-completion to at least be
correct as far as it goes and then add a check for GRANT/REVOKE to only
tab-complete when the GRANT/REVOKE is the start of the command, so we
don't try to do tab-completion after we get to the GRANT/REVOKE part of
the ALTER DEFAULT PRIVILEGES command, which is better than providing
incorrect completions.
Initial patch for master and 9.6 by Gilles Darold, though I cleaned it
up and added a few comments. All bugs in the 9.5 and earlier patch are
mine.
Discussion: https://www.postgresql.org/message-id/1614593c-e356-5b27-6dba-66320a9bc68b@dalibo.com
In pg_dump.c dumpCast() and dumpTransform(), we would happily ignore the
cast or transform if it happened to use a built-in function because we
weren't including the information about built-in functions when querying
pg_proc from getFuncs().
Modify the query in getFuncs() to also gather information about
functions which are used by user-defined casts and transforms (where
"user-defined" means "has an OID >= FirstNormalObjectId"). This also
adds to the TAP regression tests for 9.6 and master to cover these
types of objects.
Back-patch all the way for casts, back to 9.5 for transforms.
Discussion: https://www.postgresql.org/message-id/flat/20160504183952.GE10850%40tamriel.snowman.net
We didn't start ensuring that all built-in objects had OIDs less than
16384 until 8.1, so for 8.0 servers we still need to query the value out
of pg_database. We need this, in particular, to distinguish which casts
were built-in and which were user-defined.
For HEAD, we only worry about going back to 8.0, for the back-branches,
we also ensure that 7.0-7.4 work.
Discussion: https://www.postgresql.org/message-id/flat/20160504183952.GE10850%40tamriel.snowman.net
Ancient oversight in PageOutput(): if popen() fails, we'd better reset
the SIGPIPE handler before returning stdout, because ClosePager() won't.
Noticed while fixing the empty-PAGER issue.
If the PAGER environment variable is set but contains an empty string,
psql would pass it to "sh" which would silently exit, causing whatever
query output we were printing to vanish entirely. This is quite
mystifying; it took a long time for us to figure out that this was the
cause of Joseph Brenner's trouble report. Rather than allowing that
to happen, we should treat this as another way to specify "no pager".
(We could alternatively treat it as selecting the default pager, but
it seems more likely that the former is what the user meant to achieve
by setting PAGER this way.)
Nonempty, but all-white-space, PAGER values have the same behavior, and
it's pretty easy to test for that, so let's handle that case the same way.
Most other cases of faulty PAGER values will result in the shell printing
some kind of complaint to stderr, which should be enough to diagnose the
problem, so we don't need to work harder than this. (Note that there's
been an intentional decision not to be very chatty about apparent failure
returns from the pager process, since that may happen if, eg, the user
quits the pager with control-C or some such. I'd just as soon not start
splitting hairs about which exit codes might merit making our own report.)
libpq's old PQprint() function was already on board with ignoring empty
PAGER values, but for consistency, make it ignore all-white-space values
as well.
It's been like this a long time, so back-patch to all supported branches.
Discussion: https://postgr.es/m/CAFfgvXWLOE2novHzYjmQK8-J6TmHz42G8f3X0SORM44+stUGmw@mail.gmail.com
Teach it not to complain if the dropStmt attached to an archive entry
is actually spelled CREATE OR REPLACE VIEW, since that will happen due to
an upcoming bug fix. Also, if it doesn't recognize a dropStmt, have it
print a WARNING and then emit the dropStmt unmodified. That seems like a
much saner behavior than Assert'ing or dumping core due to a null-pointer
dereference, which is what would happen before :-(.
Back-patch to 9.4 where this option was introduced.
Discussion: <19092.1479325184@sss.pgh.pa.us>
They are supposed to be mutually exclusive, but there was no check for
that.
Michael Banck
Discussion: <20161007103414.GD12247@nighthawk.caipicrew.dd-dns.de>
If you point pg_rewind to a server that is using synchronous replication,
with "pg_rewind --source-server=...", and the replication is not working
for some reason, pg_rewind will get stuck because it creates a temporary
table, which needs to be replicated. You could call broken replication a
pilot error, but pg_rewind is often used in special circumstances, when
there are changes to the replication setup.
We don't do any "real" updates, and we don't care about fsyncing or
replicating the operations on the temporary tables, so fix that by
setting synchronous_commit off.
Michael Banck, Michael Paquier. Backpatch to 9.5, where pg_rewind was
introduced.
Discussion: <20161005143938.GA12247@nighthawk.caipicrew.dd-dns.de>
pg_upgrade checks whether all the shared libraries used in the old cluster
are also available in the new one by issuing LOAD for each library name.
Previously, it cared not what order it did the LOADs in. Ideally it
should not have to care, but currently the transform modules in contrib
fail unless both the language and datatype modules they depend on are
loaded first. A backend-side solution for that looks possible but
probably not back-patchable, so as a stopgap measure, let's do the LOAD
tests in order by library name length. That should fix the problem for
reasonably-named transform modules, eg "hstore_plpython" will be loaded
after both "hstore" and "plpython". (Yeah, it's a hack.)
In a larger sense, having a predictable order of these probes is a good
thing, since it will make upgrades predictably work or not work in the
face of inter-library dependencies. Also, this patch replaces O(N^2)
de-duplication logic with O(N log N) logic, which could matter in
installations with very many databases. So I don't foresee reverting this
even after we have a proper fix for the library-dependency problem.
In passing, improve a couple of SQL queries used here.
Per complaint from Andrew Dunstan that pg_upgrade'ing the transform contrib
modules failed. Back-patch to 9.5 where transform modules were introduced.
Discussion: <f7ac29f3-515c-2a44-21c5-ec925053265f@dunslane.net>
There is a small window between when the server closes out the existing
segment and the new one is created. Put a loop around the open call in
this case to make sure we wait for the new file to actually appear.
<sys/select.h> is required by POSIX.1-2001 to get the prototype of
select(2), but nearly no systems enforce that because older standards
let you get away with including some other headers. Recent OpenBSD
hacking has removed that frail touch of friendliness, however, which
broke some compiles; fix all the way back to 9.1 by adding the required
standard. Only vacuumdb.c was reported to fail, but it seems easier to
fix the whole lot in a fell swoop.
Per bug #14334 by Sean Farrell.
Faulty AND/OR nesting in the WHERE clause of getFuncs' SQL query led to
dumping range constructor functions if they are part of an extension
and we're in binary-upgrade mode. Actually, we don't want to dump them
separately even then, since CREATE TYPE AS RANGE will create the range's
constructor functions regardless. Per report from Andrew Dunstan.
It looks like this mistake was introduced by me, in commit b985d4877, in
perhaps-overzealous refactoring to reduce code duplication. I'm suitably
embarrassed.
Report: <34854939-02d7-f591-5677-ce2994104599@dunslane.net>
If the test duration was given in # of transactions (-t or no option),
rather as a duration (-T), the latency average was always printed as 0.
It has been broken ever since the display of latency average was added,
in 9.4.
Fabien Coelho
Discussion: <alpine.DEB.2.20.1607131015370.7486@sto>
We can't use txn_scheduled to hold the sleep-until time for \sleep, because
that interferes with calculation of the latency of the transaction as whole.
Backpatch to 9.4, where this bug was introduced.
Fabien COELHO
Discussion: <alpine.DEB.2.20.1608231622170.7102@lancre>
If the database has a non-default tablespace, we emitted a TABLESPACE
clause in the CREATE DATABASE command emitted by -C, even if
--no-tablespaces was also specified. This seems wrong, and it's
inconsistent with what pg_dumpall does, so change it. Per bug #14315
from Danylo Hlynskyi.
Back-patch to 9.5. The bug is much older, but it'd be a more invasive
change before 9.5 because dumpDatabase() hasn't got an easy way to get
to the outputNoTablespaces flag. Doesn't seem worth the work given
the lack of previous complaints.
Report: <20160908081953.1402.75347@wrigleys.postgresql.org>
As usual, we've been pretty awful about maintaining these counts.
They're not all that critical, perhaps, but let's get them right
at release time. Also fix 9.5, which I notice is just as bad.
It's probably wrong further back, but the lack of --help=foo
options before 9.5 makes it too painful to count.
This adds a couple of new timezones that are present in the newer
versions of Windows. It also updates comments to reference UTC rather
than GMT, as this change has been made in Windows.
Michael Paquier
This is somewhat cosmetic, since as long as you know what you are looking
at, "10.0" is a serviceable substitute for "10". But there is a potential
for confusion between version numbers with minor numbers and those without
--- we don't want people asking "why is psql saying 10.0 when my server is
10.2". Therefore, back-patch as far as practical, which turns out to be
9.3. I could have redone the patch to use fprintf(stderr) in place of
psql_error(), but it seems more work than is warranted for branches that
will be EOL or nearly so by the time v10 comes out.
Although only psql seems to contain any code that needs this, I chose
to put the support function into fe_utils, since it seems likely we'll
need it in other client programs in future. (In 9.3-9.5, use dumputils.c,
the predecessor of fe_utils/string_utils.c.)
In HEAD, also fix the backend code that whines about loadable-library
version mismatch. I don't see much need to back-patch that.
Due to simplistic quoting and confusion of database names with conninfo
strings, roles with the CREATEDB or CREATEROLE option could escalate to
superuser privileges when a superuser next ran certain maintenance
commands. The new coding rule for PQconnectdbParams() calls, documented
at conninfo_array_parse(), is to pass expand_dbname=true and wrap
literal database names in a trivial connection string. Escape
zero-length values in appendConnStrVal(). Back-patch to 9.1 (all
supported versions).
Nathan Bossart, Michael Paquier, and Noah Misch. Reviewed by Peter
Eisentraut. Reported by Nathan Bossart.
Security: CVE-2016-5424
Rename these newly-extern functions with terms more typical of their new
neighbors. No functional changes; a subsequent commit will use them in
more places. Back-patch to 9.1 (all supported versions). Back branches
lack src/fe_utils, so instead rename the functions in place; the
subsequent commit will copy them into the other programs using them.
Security: CVE-2016-5424
The incorrect quoting may have permitted arbitrary command execution.
At a minimum, it gave broader control over the command line to actors
supposed to have control over a single argument. Back-patch to 9.1 (all
supported versions).
Security: CVE-2016-5424
These characters prematurely terminate Windows shell command processing,
causing the shell to execute a prefix of the intended command. The
chief alternative to rejecting these characters was to bypass the
Windows shell with CreateProcess(), but the ability to use such names
has little value. Back-patch to 9.1 (all supported versions).
This change formally revokes support for these characters in database
names and roles names. Don't document this; the error message is
self-explanatory, and too few users would benefit. A future major
release may forbid creation of databases and roles so named. For now,
check only at known weak points in pg_dumpall. Future commits will,
without notice, reject affected names from other frontend programs.
Also extend the restriction to pg_dumpall --dbname=CONNSTR arguments and
--file arguments. Unlike the effects on role name arguments and
database names, this does not reflect a broad policy change. A
migration to CreateProcess() could lift these two restrictions.
Reviewed by Peter Eisentraut.
Security: CVE-2016-5424
These programs nominally accepted conninfo strings, but they would
proceed to use the original dbname parameter as though it were an
unadorned database name. This caused "reindexdb dbname=foo" to issue an
SQL command that always failed, and other programs printed a conninfo
string in error messages that purported to print a database name. Fix
both problems by using PQdb() to retrieve actual database names.
Continue to print the full conninfo string when reporting a connection
failure. It is informative there, and if the database name is the sole
problem, the server-side error message will include the name. Beyond
those user-visible fixes, this allows a subsequent commit to synthesize
and use conninfo strings without that implementation detail leaking into
messages. As a side effect, the "vacuuming database" message now
appears after, not before, the connection attempt. Back-patch to 9.1
(all supported versions).
Reviewed by Michael Paquier and Peter Eisentraut.
Security: CVE-2016-5424
The decision to reuse values of parameters from a previous connection
has been based on whether the new target is a conninfo string. Add this
means of overriding that default. This feature arose as one component
of a fix for security vulnerabilities in pg_dump, pg_dumpall, and
pg_upgrade, so back-patch to 9.1 (all supported versions). In 9.3 and
later, comment paragraphs that required update had already-incorrect
claims about behavior when no connection is open; fix those problems.
Security: CVE-2016-5424
In arguments, these meta-commands wrongly treated each pair as closing
the double quoted string. Make the behavior match the documentation.
This is a compatibility break, but I more expect to find software with
untested reliance on the documented behavior than software reliant on
today's behavior. Back-patch to 9.1 (all supported versions).
Reviewed by Tom Lane and Peter Eisentraut.
Security: CVE-2016-5424
