This adds a couple of new timezones that are present in the newer
versions of Windows. It also updates comments to reference UTC rather
than GMT, as this change has been made in Windows.
Michael Paquier
Back-patch commit 1c1a7cbd6a, along with subsequent portability
fixes, into all active branches. Also, back-patch commits 696027727 and
596857043 (addition of zic -P option) into 9.1 and 9.2, just to reduce
differences between the branches. src/timezone/ is now largely identical
in all active branches, except that in 9.1, pgtz.c retains the
initial-timezone-selection code that was moved over to initdb in 9.2.
Ordinarily we wouldn't risk this much code churn in back branches, but it
seems necessary in this case, because among the changes are two feature
additions in the "zic" zone data file compiler (a larger limit on the
number of allowed DST transitions, and addition of a "%z" escape in zone
abbreviations). IANA have not yet started to use those features in their
tzdata files, but presumably they will before too long. If we don't update
then we'll be unable to adopt new timezone data. Also, installations built
with --with-system-tzdata (which includes most distro-supplied builds, I
believe) might fail even if we don't update our copies of the data files.
There are assorted bug fixes too, mostly affecting obscure timezones or
post-2037 dates.
Discussion: <13601.1468868947@sss.pgh.pa.us>
Turns out the only reason initdb -X worked is that pg_mkdir_p won't
whine if you point it at something that's a symlink to a directory.
Otherwise, the attempt to create pg_xlog/ just like all the other
subdirectories would have failed. Let's be a little more explicit
about what's happening. Oversight in my patch for bug #13853
(mea culpa for not testing -X ...)
When we're creating subdirectories of PGDATA during initdb, we know darn
well that the parent directory exists (or should exist) and that the new
subdirectory doesn't (or shouldn't). There is therefore no need to use
anything more complicated than mkdir(). Using pg_mkdir_p() just opens us
up to unexpected failure modes, such as the one exhibited in bug #13853
from Nuri Boardman. It's not very clear why pg_mkdir_p() went wrong there,
but it is clear that we didn't need to be trying to create parent
directories in the first place. We're not even saving any code, as proven
by the fact that this patch nets out at minus five lines.
Since this is a response to a field bug report, back-patch to all branches.
The fsync code from the backend essentially assumes that somebody's already
validated PGDATA, at least to the extent of it being a readable directory.
That's safe enough for initdb's normal code path too, but "initdb -S"
doesn't have any other processing at all that touches the target directory.
To have reasonable error-case behavior, add a pg_check_dir call.
Per gripe from Peter E.
The argument that this is a sufficiently-expected case to be silently
ignored seems pretty thin. Andres had brought it up back when we were
still considering that most fsync failures should be hard errors, and it
probably would be legit not to fail hard for ETXTBSY --- but the same is
true for EROFS and other cases, which is why we gave up on hard failures.
ETXTBSY is surely not a normal case, so logging the failure seems fine
from here.
Make initdb's version of this logic look as much like the backend's
as possible. This is much less critical than in the backend since not
so many people use "initdb -S", but we want the same corner-case error
handling in both cases.
Back-patch to 9.3 where initdb -S option was introduced. Before that,
initdb only had to deal with freshly-created data directories, wherein
no failures should be expected.
Abhijit Menon-Sen
This eliminates many seconds of test duration and the cause to invoke
"rm -rf", which is typically unavailable on Windows.
Michael Paquier and Noah Misch
Commit c67a86f7da caught most of these,
but this negative test escaped notice. The test did pass, for the wrong
reason, under affected configurations.
Michael Paquier
The "check" target no longer needs to depend on "all", because it now
runs "install" directly, which in turn depends on "all". Doing both
will cause problems with parallel make, because two builds will run next
to each other.
Also remove the redirection of the temp-install output into a log file.
This was appropriate when this was done from within pg_regress, but now
it's just a regular make run, and especially with the above changes this
will now take the place of running the "all" target before the test
suites.
problem report by Jeff Janes, patch in part by Michael Paquier
Some of the TAP tests were supposing that PG programs would accept switches
after non-switch arguments on their command lines. While GNU getopt_long()
does allow that, our own implementation does not, and it's nowhere
suggested in our documentation that such cases should work. Adjust the
tests to use only the documented syntax.
Back-patch to 9.4, since without this the TAP tests fail when run with
src/port's getopt_long() implementation.
Michael Paquier
As with initdb these programs need to run with a restricted token, and
if they don't pg_upgrade will fail when run as a user with Adminstrator
privileges.
Backpatch to all live branches. On the development branch the code is
reorganized so that the restricted token code is now in a single
location. On the stable bramches a less invasive change is made by
simply copying the relevant code to pg_upgrade.c and pg_resetxlog.c.
Patches and bug report from Muhammad Asif Naeem, reviewed by Michael
Paquier, slightly edited by me.
strncpy() has a well-deserved reputation for being unsafe, so make an
effort to get rid of nearly all occurrences in HEAD.
A large fraction of the remaining uses were passing length less than or
equal to the known strlen() of the source, in which case no null-padding
can occur and the behavior is equivalent to memcpy(), though doubtless
slower and certainly harder to reason about. So just use memcpy() in
these cases.
In other cases, use either StrNCpy() or strlcpy() as appropriate (depending
on whether padding to the full length of the destination buffer seems
useful).
I left a few strncpy() calls alone in the src/timezone/ code, to keep it
in sync with upstream (the IANA tzcode distribution). There are also a
few such calls in ecpg that could possibly do with more analysis.
AFAICT, none of these changes are more than cosmetic, except for the four
occurrences in fe-secure-openssl.c, which are in fact buggy: an overlength
source leads to a non-null-terminated destination buffer and ensuing
misbehavior. These don't seem like security issues, first because no stack
clobber is possible and second because if your values of sslcert etc are
coming from untrusted sources then you've got problems way worse than this.
Still, it's undesirable to have unpredictable behavior for overlength
inputs, so back-patch those four changes to all active branches.
Used to say just "could not read password from file "...": Success", which
isn't very informative.
Mats Erik Andersson. Backpatch to all supported versions.
Since this is not something that a user should change,
pg_config_manual.h was an inappropriate place for it.
In initdb.c, remove the use of the macro, because utils/guc.h can't be
included by non-backend code. But we hardcode all the other
configuration file names there, so this isn't a disaster.
Transactions can now set their commit timestamp directly as they commit,
or an external transaction commit timestamp can be fed from an outside
system using the new function TransactionTreeSetCommitTsData(). This
data is crash-safe, and truncated at Xid freeze point, same as pg_clog.
This module is disabled by default because it causes a performance hit,
but can be enabled in postgresql.conf requiring only a server restart.
A new test in src/test/modules is included.
Catalog version bumped due to the new subdirectory within PGDATA and a
couple of new SQL functions.
Authors: Álvaro Herrera and Petr Jelínek
Reviewed to varying degrees by Michael Paquier, Andres Freund, Robert
Haas, Amit Kapila, Fujii Masao, Jaime Casanova, Simon Riggs, Steven
Singer, Peter Eisentraut
630cd14426 added initdb --sync-only, for use by pg_upgrade, by just
exposing the existing fsync code. That's wrong, because initdb so far
had absolutely no reason to deal with tablespaces.
Fix --sync-only by additionally explicitly syncing each of the
tablespaces.
Backpatch to 9.3 where --sync-only was introduced.
Abhijit Menon-Sen and Andres Freund
The old name wasn't very descriptive as of actual contents of the
directory, which are historical snapshots in the snapshots/
subdirectory and mappingdata for rewritten tuples in
mappings/. There's been a fair amount of discussion what would be a
good name. I'm settling for pg_logical because it's likely that
further data around logical decoding and replication will need saving
in the future.
Also add the missing entry for the directory into storage.sgml's list
of PGDATA contents.
Bumps catversion as the data directories won't be compatible.
Historically these database properties could be manipulated only by
manually updating pg_database, which is error-prone and only possible for
superusers. But there seems no good reason not to allow database owners to
set them for their databases, so invent CREATE/ALTER DATABASE options to do
that. Adjust a couple of places that were doing it the hard way to use the
commands instead.
Vik Fearing, reviewed by Pavel Stehule
In yesterday's commit 2dc4f011fd, I tried
to force buffering of stdout/stderr in initdb to be what it is by
default when the program is run interactively on Unix (since that's how
most manual testing is done). This tripped over the fact that Windows
doesn't support _IOLBF mode. We dealt with that a long time ago in
syslogger.c by falling back to unbuffered mode on Windows. Export that
solution in port.h and use it in initdb.
Back-patch to 8.4, like the previous commit.
Since this program may print to either stdout or stderr, the relative
ordering of its messages depends on the buffering behavior of those files.
Force stdout to be line-buffered and stderr to be unbuffered, ensuring
that the behavior will match standard Unix interactive behavior, even
when stdout and stderr are rerouted to a file.
Per complaint from Tomas Vondra. The particular case he pointed out is
new in HEAD, but issues of the same sort could arise in any branch with
other error messages, so back-patch to all branches.
I'm unsure whether we might not want to do this in other client programs
as well. For the moment, just fix initdb.
Historically we've printed a complaint for a bad locale setting, but then
fallen back to the environment default. Per discussion, this is not such
a great idea, because rectifying an erroneous locale choice post-initdb
(perhaps long after data has been loaded) could be enormously expensive.
Better to complain and give the user a chance to double-check things.
The behavior was particularly bad if the bad setting came from environment
variables rather than a bogus command-line switch: in that case not only
was there a fallback to C/SQL_ASCII, but the printed complaint was quite
unhelpful. It's hard to be entirely sure what variables setlocale looked
at, but we can at least give a hint where the problem might be.
Per a complaint from Tomas Vondra.
