This previously resulted in an error and a nonzero exit status, but
after discussion this should rather be a noop with a zero exit status.
This is a back-patch of commit 6b34e55638,
plus two changes from commit e50cda7840
that teach pg_rewind to allow the initial control file states to be
DB_SHUTDOWNED_IN_RECOVERY as well as DB_SHUTDOWNED. That's necessary
to get the additional regression test case to pass, and the old behavior
seems like rather a foot-gun anyway.
Peter Eisentraut and Tom Lane
Complete "ALTER POLICY" with a policy name, as we do for DROP POLICY.
And, complete "ALTER POLICY polname ON" with a table name that has such
a policy, as we do for DROP POLICY, rather than with any table name
at all.
Masahiko Sawada
Commit 344cdff2c made failure to open the target of --output fatal.
For consistency, the --log-file switch should behave similarly.
Like the previous commit, back-patch to 9.5 but no further.
Daniel Verite
Formerly, if "psql -o foo" failed to open the output file "foo", it would
print an error message but then carry on as though -o had not been
specified at all. This seems contrary to expectation: a program that
cannot open its output file normally fails altogether. Make psql do
exit(1) after reporting the error.
If "\o foo" failed to open "foo", it would print an error message but then
reset the output file to stdout, as if the argument had been omitted.
This is likewise pretty surprising behavior. Make it keep the previous
output state, instead.
psql keeps SIGPIPE interrupts disabled when it is writing to a pipe, either
a pipe specified by -o/\o or a transient pipe opened for purposes such as
using a pager on query output. The logic for this was too simple and could
sometimes re-enable SIGPIPE when a -o pipe was still active, thus possibly
leading to an unexpected psql crash later.
Fixing the last point required getting rid of the kluge in PrintQueryTuples
and ExecQueryUsingCursor whereby they'd transiently change the global
queryFout state, but that seems like good cleanup anyway.
Back-patch to 9.5 but not further; these are minor-enough issues that
changing the behavior in stable branches doesn't seem appropriate.
The formatting modes that depend on knowledge of the terminal window width
did not work right when printing a query result that's been fetched in
sections (as a result of FETCH_SIZE). ExecQueryUsingCursor() would force
use of the pager as soon as there's more than one result section, and then
print.c would see an output file pointer that's not stdout and incorrectly
conclude that the terminal window width isn't relevant.
This has been broken all along for non-expanded "wrapped" output format,
and as of 9.5 the issue affects expanded mode as well. The problem also
caused "\pset expanded auto" mode to invariably *not* switch to expanded
output in a segmented result, which seems to me to be exactly backwards.
To fix, we need to pass down an "is_pager" flag to inform the print.c
subroutines that some calling level has already replaced stdout with a
pager pipe, so they should (a) not do that again and (b) nonetheless honor
the window size. (Notably, this makes the first is_pager test in
print_aligned_text() not be dead code anymore.)
This patch is a bit invasive because there are so many existing calls of
printQuery()/printTable(), but fortunately all but a couple can just pass
"false" for the added parameter.
Back-patch to 9.5 but no further. Given the lack of field complaints,
it's not clear that we should change the behavior in stable branches.
Also, the API change for printQuery()/printTable() might possibly break
third-party code, again something we don't like to do in stable branches.
However, it's not quite too late to do this in 9.5, and with the larger
scope of the problem there, it seems worth doing.
Don't force the data width to extend all the way to the right margin if it
doesn't need to. This reverts the behavior in non-wrapping cases to be
what it was in 9.4. Also, make the logic that ensures the data line width
is at least equal to the record-header line width a little less obscure.
In passing, avoid possible calculation of log10(0). Probably that's
harmless, given the lack of field complaints, but it seems risky:
conversion of NaN to an integer isn't well defined.
We should ignore output_columns unless it's greater than zero.
A zero means we couldn't get any information from ioctl(TIOCGWINSZ);
in that case the expected behavior is to print the data at native width,
not to wrap it at the smallest possible value. print_aligned_text()
gets this consideration right, but print_aligned_vertical() lost track
of this detail somewhere along the line.
This area was rather heavily whacked around in 6513633b9 and follow-on
commits, and it was showing it, because the logic to calculate the
allowable data width in wrapped expanded mode had only the vaguest
relationship to the logic that was actually printing the data. It was
not very close to being right about the conditions requiring overhead
columns to be added. Aside from being wrong, it was pretty unreadable
and under-commented. Rewrite it so it corresponds to what the printing
code actually does.
In passing, remove a couple of dead tests in the printing logic, too.
Per a complaint from Jeff Janes, though this doesn't look much like his
patch because it fixes a number of other corner-case bogosities too.
One such fix that's visible in the regression test results is that
although the code was attempting to enforce a minimum data width of
3 columns, it sometimes left less space than that available.
PQhost() can return NULL in non-error situations, namely when a Unix-socket
connection has been selected by default. That behavior is a tad debatable
perhaps, but for the moment we should make sure that psql copes with it.
Unfortunately, do_connect() failed to: it could pass a NULL pointer to
strcmp(), resulting in crashes on most platforms. This was reported as a
security issue by ChenQin of Topsec Security Team, but the consensus of
the security list is that it's just a garden-variety bug with no security
implications.
For paranoia's sake, I made the keep_password test not trust PQuser or
PQport either, even though I believe those will never return NULL given
a valid PGconn.
Back-patch to all supported branches.
Also fix getErrorText() to return the right error string on failure.
This behavior now matches that of other operating systems.
Report by Noah Misch
Backpatch through 9.1
The POSIX standard for tar headers requires archive member sizes to be
printed in octal with at most 11 digits, limiting the representable file
size to 8GB. However, GNU tar and apparently most other modern tars
support a convention in which oversized values can be stored in base-256,
allowing any practical file to be a tar member. Adopt this convention
to remove two limitations:
* pg_dump with -Ft output format failed if the contents of any one table
exceeded 8GB.
* pg_basebackup failed if the data directory contained any file exceeding
8GB. (This would be a fatal problem for installations configured with a
table segment size of 8GB or more, and it has also been seen to fail when
large core dump files exist in the data directory.)
File sizes under 8GB are still printed in octal, so that no compatibility
issues are created except in cases that would have failed entirely before.
In addition, this patch fixes several bugs in the same area:
* In 9.3 and later, we'd defined tarCreateHeader's file-size argument as
size_t, which meant that on 32-bit machines it would write a corrupt tar
header for file sizes between 4GB and 8GB, even though no error was raised.
This broke both "pg_dump -Ft" and pg_basebackup for such cases.
* pg_restore from a tar archive would fail on tables of size between 4GB
and 8GB, on machines where either "size_t" or "unsigned long" is 32 bits.
This happened even with an archive file not affected by the previous bug.
* pg_basebackup would fail if there were files of size between 4GB and 8GB,
even on 64-bit machines.
* In 9.3 and later, "pg_basebackup -Ft" failed entirely, for any file size,
on 64-bit big-endian machines.
In view of these potential data-loss bugs, back-patch to all supported
branches, even though removal of the documented 8GB limit might otherwise
be considered a new feature rather than a bug fix.
This back-ports commit 13d856e177 and assorted followon patches
into 9.4 and 9.5. 9.5 and HEAD are now substantially identical in all
the files touched by this commit, except that 010_pg_basebackup.pl has
a few more tests related to the new --slot option. 9.4 has many fewer
TAP tests, but the test infrastructure files are substantially the same,
with the exception that 9.4 lacks the single-tmp-install infrastructure
introduced in 9.5 (commit dcae5facca).
The primary motivation for this patch is to ensure that TAP test case
fixes can be back-patched without hazards of the kind seen in commits
34557f544/06dd4b44f. In principle it should also make the world safe
for running the TAP tests in the buildfarm in these branches; although
we might want to think about back-porting dcae5facca to 9.4 if
we're going to do that for real, because the TAP tests are quite disk
space hungry without it.
Michael Paquier did the back-porting work; original patches were by
him and assorted other people.
Having the script prompt for passwords over and over was a preexisting
problem when it processed multiple databases or when it processed
multiple analyze stages, but the parallel mode introduced in commit
a179232047 made it worse.
Fix the annoyance by keeping a copy of the password used by the first
connection that requires one. Since users can (currently) only have a
single password, there's no need for more complex arrangements (such as
remembering one password per database).
Per bug #13741 reported by Eric Brown. Patch authored and
cross-reviewed by Haribabu Kommi and Michael Paquier, slightly tweaked
by Álvaro Herrera.
Discussion: http://www.postgresql.org/message-id/20151027193919.931.54948@wrigleys.postgresql.org
Backpatch to 9.5, where parallel vacuumdb was introduced.
At least OpenBSD, NetBSD, and Windows don't support it. This repairs
pg_ctl for listen_addresses='0.0.0.0' and listen_addresses='::'. Since
pg_ctl prefers to test a Unix-domain socket, Windows users are most
likely to need this change. Back-patch to 9.1 (all supported versions).
This could change pg_ctl interaction with loopback-interface firewall
rules. Therefore, in 9.4 and earlier (released branches), activate the
change only on known-affected platforms.
Reported (bug #13611) and designed by Kondo Yuta.
Fix some brain fade in commit a2dabf0e1d: erroneous variable names
in docs, rearrangements that made sentences less clear not more so,
undocumented and poorly-chosen-anyway API behaviors of subroutines,
bad grammar in error messages, copy-and-paste faults.
Albe Laurenz and Tom Lane
-- gitweb summary limit --------------------------
pg_upgrade: reorder controldata checks to match program output
Also improve comment for how float8_pass_by_value is used.
Backpatch through 9.5
pg_ctl start with -w previously relied on a heuristic that the postmaster
would surely always manage to create postmaster.pid within five seconds.
Unfortunately, that fails much more often than we would like on some of the
slower, more heavily loaded buildfarm members.
We have known for quite some time that we could remove the need for that
heuristic on Unix by using fork/exec instead of system() to launch the
postmaster. This allows us to know the exact PID of the postmaster, which
allows near-certain verification that the postmaster.pid file is the one
we want and not a leftover, and it also lets us use waitpid() to detect
reliably whether the child postmaster has exited or not.
What was blocking this change was not wanting to rewrite the Windows
version of start_postmaster() to avoid use of CMD.EXE. That's doable
in theory but would require fooling about with stdout/stderr redirection,
and getting the handling of quote-containing postmaster switches to
stay the same might be rather ticklish. However, we realized that
we don't have to do that to fix the problem, because we can test
whether the shell process has exited as a proxy for whether the
postmaster is still alive. That doesn't allow an exact check of the
PID in postmaster.pid, but we're no worse off than before in that
respect; and we do get to get rid of the heuristic about how long the
postmaster might take to create postmaster.pid.
On Unix, this change means that a second "pg_ctl start -w" immediately
after another such command will now reliably fail, whereas previously
it would succeed if done within two seconds of the earlier command.
Since that's a saner behavior anyway, it's fine. On Windows, the case can
still succeed within the same time window, since pg_ctl can't tell that the
earlier postmaster's postmaster.pid isn't the pidfile it is looking for.
To ensure stable test results on Windows, we can insert a short sleep into
the test script for pg_ctl, ensuring that the existing pidfile looks stale.
This hack can be removed if we ever do rewrite start_postmaster(), but that
no longer seems like a high-priority thing to do.
Back-patch to all supported versions, both because the current behavior
is buggy and because we must do that if we want the buildfarm failures
to go away.
Tom Lane and Michael Paquier
To allow users to force RLS to always be applied, even for table owners,
add ALTER TABLE .. FORCE ROW LEVEL SECURITY.
row_security=off overrides FORCE ROW LEVEL SECURITY, to ensure pg_dump
output is complete (by default).
Also add SECURITY_NOFORCE_RLS context to avoid data corruption when
ALTER TABLE .. FORCE ROW SECURITY is being used. The
SECURITY_NOFORCE_RLS security context is used only during referential
integrity checks and is only considered in check_enable_rls() after we
have already checked that the current user is the owner of the relation
(which should always be the case during referential integrity checks).
Back-patch to 9.5 where RLS was added.
The output of a typical pg_rewind run contained a mix of capitalized and
not-capitalized and punctuated and not-punctuated phrases for no
apparent reason. Make that consistent. Also fix some problems in other
messages.
This case seems to have been overlooked when unvalidated check constraints
were introduced, in 9.2. The code would attempt to dump such constraints
over again for each child table, even though adding them to the parent
table is sufficient.
In 9.2 and 9.3, also fix contrib/pg_upgrade/Makefile so that the "make
clean" target fully cleans up after a failed test. This evidently got
dealt with at some point in 9.4, but it wasn't back-patched. I ran into
it while testing this fix ...
Per bug #13656 from Ingmar Brouns.
The tolerance (larger than actual tps number) increases as the number
of threads decreases. The bug has been there since the thread support
was introduced in 9.0. Because back patching introduces incompatible
behavior changes regarding the tps number, the fix is committed to
master and 9.5 stable branches only.
Problem spotted by me and fix proposed by Fabien COELHO. Note that his
original patch included more than fixes (a code re-factoring) which is
not related to the problem and I omitted the part.
(Third time's the charm, I hope.)
Additional testing disclosed that this code could mangle already-localized
output from the "money" datatype. We can't very easily skip applying it
to "money" values, because the logic is tied to column right-justification
and people expect "money" output to be right-justified. Short of
decoupling that, we can fix it in what should be a safe enough way by
testing to make sure the string doesn't contain any characters that would
not be expected in plain numeric output.
On closer inspection, those seemingly redundant atoi() calls were not so
much inefficient as just plain wrong: the author of this code either had
not read, or had not understood, the POSIX specification for localeconv().
The grouping field is *not* a textual digit string but separate integers
encoded as chars.
We'll follow the existing code as well as the backend's cash.c in only
honoring the first group width, but let's at least honor it correctly.
This doesn't actually result in any behavioral change in any of the
locales I have installed on my Linux box, which may explain why nobody's
complained; grouping width 3 is close enough to universal that it's barely
worth considering other cases. Still, wrong is wrong, so back-patch.
This code did the wrong thing entirely for numbers with an exponent
but no decimal point (e.g., '1e6'), as reported by Jeff Janes in
bug #13636. More generally, it made lots of unverified assumptions
about what the input string could possibly look like. Rearrange so
that it only fools with leading digits that it's directly verified
are there, and an immediately adjacent decimal point. While at it,
get rid of some useless inefficiencies, like converting the grouping
count string to integer over and over (and over).
This has been broken for a long time, so back-patch to all supported
branches.
Previously pg_controldata didn't report newestCommitTs and this was
an oversight in commit 73c986a.
Also this patch changes pg_resetxlog so that it uses the same sentences
as pg_controldata does, regarding oldestCommitTs and newestCommitTs,
for the sake of consistency.
Back-patch to 9.5 where track_commit_timestamp was added.
Euler Taveira
This setting contains extra configuration for the temp instance, as used
in pg_regress' --temp-config flag.
Backpatch to 9.2 where test.sh was introduced.
Modify pg_dump to restore postgres/template1 databases to non-default
tablespaces by switching out of the database to be moved, then switching
back.
Also, to fix potentially cases where the old/new tablespaces might not
match, fix pg_upgrade to process new/old tablespaces separately in all
cases.
Report by Marti Raudsepp
Patch by Marti Raudsepp, me
Backpatch through 9.0
If a transaction never reaches the standby, later tests find unexpected
cluster state. A "tail-copy: query result matches" test failure has
been the usual symptom. Among the buildfarm members having run this
test suite, most have exhibited that symptom at least once. Back-patch
to 9.5, where pg_rewind was introduced.
Michael Paquier, reported by Christoph Berg.
Most suites already did so via start_test_server(), but the pg_rewind,
pg_ctl and pg_controldata suites ran a postmaster or initdb with fsync
enabled. This halves the pg_rewind suite's runtime on buildfarm member
tern. It makes tern and that machine's other buildfarm members less
vulnerable to noise failures from postmaster startup overrunning the 60s
pg_ctl timeout. Back-patch to 9.5, where pg_rewind was introduced.
Until 9.4, pg_controldata output was all aligned. At some point
during 9.5 development, a new item was added, namely
"Current track_commit_timestamp setting:" which is two characters
too long to be aligned with the rest of the output. Fix this by
removing the noise word "Current" and adding the requisite number
of padding spaces. Since the six preceding items are also similar
in nature, remove "Current" and pad those as well in order to
maintain overall consistency. Backpatch to 9.5 where new offending
item was added.
Since a179232047 (vacuumdb: enable parallel mode) -1 has been assigned
to a boolean. That can, justifiedly, trigger compiler warnings. There's
also no need for ternary logic, result was only ever set to 0 or -1. So
don't.
Discussion: 20150812084351.GD8470@awork2.anarazel.de
Backpatch: 9.5
Mistakenly relreplident was stored as a bool. That works today as c.h
typedefs bool to a char, but isn't very future proof.
Discussion: 20150812084351.GD8470@awork2.anarazel.de
Backpatch: 9.4 where replica identity was introduced.
