A simple UNION ALL gets flattened into an appendrel of subquery
RTEs, but up until now it's been impossible for the appendrel to use
the partial paths for the subqueries, so we can implement the
appendrel as a Parallel Append but only one with non-partial paths
as children.
There are three separate obstacles to removing that limitation.
First, when planning a subquery, propagate any partial paths to the
final_rel so that they are potentially visible to outer query levels
(but not if they have initPlans attached, because that wouldn't be
safe). Second, after planning a subquery, propagate any partial paths
for the final_rel to the subquery RTE in the outer query level in the
same way we do for non-partial paths. Third, teach finalize_plan() to
account for the possibility that the fake parameter we use for rescan
signalling when the plan contains a Gather (Merge) node may be
propagated from an outer query level.
Patch by me, reviewed and tested by Amit Khandekar, Rajkumar
Raghuwanshi, and Ashutosh Bapat. Test cases based on examples by
Rajkumar Raghuwanshi.
Discussion: http://postgr.es/m/CA+Tgmoa6L9A1nNCk3aTDVZLZ4KkHDn1+tm7mFyFvP+uQPS7bAg@mail.gmail.com
The existing logic for updating pg_class.reltuples trusted the sampling
results only for the pages ANALYZE actually visited, preferring to
believe the previous tuple density estimate for all the unvisited pages.
While there's some rationale for doing that for VACUUM (first that
VACUUM is likely to visit a very nonrandom subset of pages, and second
that we know for sure that the unvisited pages did not change), there's
no such rationale for ANALYZE: by assumption, it's looked at an unbiased
random sample of the table's pages. Furthermore, in a very large table
ANALYZE will have examined only a tiny fraction of the table's pages,
meaning it cannot slew the overall density estimate very far at all.
In a table that is physically growing, this causes reltuples to increase
nearly proportionally to the change in relpages, regardless of what is
actually happening in the table. This has been observed to cause reltuples
to become so much larger than reality that it effectively shuts off
autovacuum, whose threshold for doing anything is a fraction of reltuples.
(Getting to the point where that would happen seems to require some
additional, not well understood, conditions. But it's undeniable that if
reltuples is seriously off in a large table, ANALYZE alone will not fix it
in any reasonable number of iterations, especially not if the table is
continuing to grow.)
Hence, restrict the use of vac_estimate_reltuples() to VACUUM alone,
and in ANALYZE, just extrapolate from the sample pages on the assumption
that they provide an accurate model of the whole table. If, by very bad
luck, they don't, at least another ANALYZE will fix it; in the old logic
a single bad estimate could cause problems indefinitely.
In HEAD, let's remove vac_estimate_reltuples' is_analyze argument
altogether; it was never used for anything and now it's totally pointless.
But keep it in the back branches, in case any third-party code is calling
this function.
Per bug #15005. Back-patch to all supported branches.
David Gould, reviewed by Alexander Kuzmenkov, cosmetic changes by me
Discussion: https://postgr.es/m/20180117164916.3fdcf2e9@engels
In databases with many tables, re-fetching the statistics takes some time,
so that this behavior seriously decreases the available concurrency for
multiple autovac workers. There's discussion afoot about more complete
fixes, but a simple and back-patchable amelioration is to claim the table
and release the lock before rechecking stats. If we find out there's no
longer a reason to process the table, re-taking the lock to un-claim the
table is cheap enough.
(This patch is quite old, but got lost amongst a discussion of more
aggressive fixes. It's not clear when or if such a fix will be
accepted, but in any case it'd be unlikely to get back-patched.
Let's do this now so we have some improvement for the back branches.)
In passing, make the normal un-claim step take AutovacuumScheduleLock
not AutovacuumLock, since that is what is documented to protect the
wi_tableoid field. This wasn't an actual bug in view of the fact that
readers of that field hold both locks, but it creates some concurrency
penalty against operations that need only AutovacuumLock.
Back-patch to all supported versions.
Jeff Janes
Discussion: https://postgr.es/m/26118.1520865816@sss.pgh.pa.us
Several places used similar code to convert a string to an int, so take
the function that we already had and make it globally available.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
A Value node would store an integer as a long. This causes needless
portability risks, as long can be of varying sizes. Change it to use
int instead. All code using this was already careful to only store
32-bit values anyway.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
CREATE TABLE / LIKE with a bigint identity column would fail on
platforms where long is 32 bits. Copying the sequence values used
makeInteger(), which would truncate the 64-bit sequence data to 32 bits.
To fix, use makeFloat() instead, like the parser. (This does not
actually make use of floats, but stores the values as strings.)
Bug: #15096
Reviewed-by: Michael Paquier <michael@paquier.xyz>
If a table containing a primary key is attach as partition to a
partitioned table which has a primary key with a different definition,
we would happily create a second one in the new partition. Oops. It
turns out that this is because an error check in DefineIndex is executed
only if you tell it that it's being run by ALTER TABLE, and the original
code here wasn't. Change it so that it does.
Added a couple of test cases for this, also. A previously working test
started to fail in a different way than before patch because the new
check is called earlier; change the PK to plain UNIQUE so that the new
behavior isn't invoked, so that the test continues to verify what we
want it to verify.
Reported by: Noriyoshi Shinoda
Discussion: https://postgr.es/m/DF4PR8401MB102060EC2615EC9227CC73F7EEDF0@DF4PR8401MB1020.NAMPRD84.PROD.OUTLOOK.COM
One of the things canonicalize_qual() does is to remove constant-NULL
subexpressions of top-level AND/OR clauses. It does that on the assumption
that what it's given is a top-level WHERE clause, so that NULL can be
treated like FALSE. Although this is documented down inside a subroutine
of canonicalize_qual(), it wasn't mentioned in the documentation of that
function itself, and some callers hadn't gotten that memo.
Notably, commit d007a9505 caused get_relation_constraints() to apply
canonicalize_qual() to CHECK constraints. That allowed constraint
exclusion to misoptimize situations in which a CHECK constraint had a
provably-NULL subclause, as seen in the regression test case added here,
in which a child table that should be scanned is not. (Although this
thinko is ancient, the test case doesn't fail before 9.2, for reasons
I've not bothered to track down in detail. There may be related cases
that do fail before that.)
More recently, commit f0e44751d added an independent bug by applying
canonicalize_qual() to index expressions, which is even sillier since
those might not even be boolean. If they are, though, I think this
could lead to making incorrect index entries for affected index
expressions in v10. I haven't attempted to prove that though.
To fix, add an "is_check" parameter to canonicalize_qual() to specify
whether it should assume WHERE or CHECK semantics, and make it perform
NULL-elimination accordingly. Adjust the callers to apply the right
semantics, or remove the call entirely in cases where it's not known
that the expression has one or the other semantics. I also removed
the call in some cases involving partition expressions, where it should
be a no-op because such expressions should be canonical already ...
and was a no-op, independently of whether it could in principle have
done something, because it was being handed the qual in implicit-AND
format which isn't what it expects. In HEAD, add an Assert to catch
that type of mistake in future.
This represents an API break for external callers of canonicalize_qual().
While that's intentional in HEAD to make such callers think about which
case applies to them, it seems like something we probably wouldn't be
thanked for in released branches. Hence, in released branches, the
extra parameter is added to a new function canonicalize_qual_ext(),
and canonicalize_qual() is a wrapper that retains its old behavior.
Patch by me with suggestions from Dean Rasheed. Back-patch to all
supported branches.
Discussion: https://postgr.es/m/24475.1520635069@sss.pgh.pa.us
Commit b08df9cab left things rather poorly documented as far as the
exact semantics of "clause_is_check" mode went. Also, that mode did
not really work correctly for predicate_refuted_by; although given the
lack of specification as to what it should do, as well as the lack
of any actual use-case, that's perhaps not surprising.
Rename "clause_is_check" to "weak" proof mode, and provide specifications
for what it should do. I defined weak refutation as meaning "truth of A
implies non-truth of B", which makes it possible to use the mode in the
part of relation_excluded_by_constraints that checks for mutually
contradictory WHERE clauses. Fix up several places that did things wrong
for that definition. (As far as I can see, these errors would only lead
to failure-to-prove, not incorrect claims of proof, making them not
serious bugs even aside from the fact that v10 contains no use of this
mode. So there seems no need for back-patching.)
In addition, teach predicate_refuted_by_recurse that it can use
predicate_implied_by_recurse after all when processing a strong NOT-clause,
so long as it asks for the correct proof strength. This is an optimization
that could have been included in commit b08df9cab, but wasn't.
Also, simplify and generalize the logic that checks for whether nullness of
the argument of IS [NOT] NULL would force overall nullness of the predicate
or clause. (This results in a change in the partition_prune test's output,
as it is now able to prune an all-nulls partition that it did not recognize
before.)
In passing, in PartConstraintImpliedByRelConstraint, remove bogus
conversion of the constraint list to explicit-AND form and then right back
again; that accomplished nothing except forcing a useless extra level of
recursion inside predicate_implied_by.
Discussion: https://postgr.es/m/5983.1520487191@sss.pgh.pa.us
Since commit 69f4b9c85f, the existing
code was no longer assessing the parallel-safety of the real tlist
for each upper rel, but rather the first of possibly several tlists
created by split_pathtarget_at_srfs(). Repair.
Even though this is clearly wrong, it's not clear that it has any
user-visible consequences at the moment, so no back-patch for now. If
we discover later that it does have user-visible consequences, we
might need to back-patch this to v10.
Patch by me, per a report from Rajkumar Raghuwanshi.
Discussion: http://postgr.es/m/CA+Tgmoaob_Strkg4Dcx=VyxnyXtrmkV=ofj=pX7gH9hSre-g0Q@mail.gmail.com
We were independently checking ReservedBackends < MaxConnections and
max_wal_senders < MaxConnections, but because walsenders aren't allowed
to use superuser-reserved connections, that's really the wrong thing.
Correct behavior is to insist on ReservedBackends + max_wal_senders being
less than MaxConnections. Fix the code and associated documentation.
This has been wrong for a long time, but since the situation probably
hardly ever arises in the field (especially pre-v10, when the default
for max_wal_senders was zero), no back-patch.
Discussion: https://postgr.es/m/28271.1520195491@sss.pgh.pa.us
Noticed while playing with changes that mess with the bootstrap
sequence; the operations patched here failed to emit anything, leading
the developer to think that the bug was in the previous operation that
did emit a message.
Commit 1804284042 established that single-batch
parallel-aware hash joins could create one large shared hash table using the
combined work_mem budget of all participants. The costing accidentally
assumed that parallel-oblivious hash joins could also do that. The
documentation for initial_cost_hashjoin() also failed to mention the new
argument. Repair.
Author: Thomas Munro
Reported-By: Antonin Houska
Reviewed-By: Antonin Houska
Discussion: https://postgr.es/m/12441.1513935950%40localhost
If a walsender exits leaving data in reorderbuffers, the next walsender
that tries to decode the same transaction would append its decoded data
in the same spill files without truncating it first, which effectively
duplicate the data. Avoid that by removing any leftover reorderbuffer
spill files when a walsender starts.
Backpatch to 9.4; this bug has been there from the very beginning of
logical decoding.
Author: Craig Ringer, revised by me
Reviewed by: Álvaro Herrera, Petr Jelínek, Masahiko Sawada
Apparently, it doesn't work to use a plain cstring as a Name datum: you
may end up having random bytes because of failing to zero the bytes
after the terminating \0, as indicated by valgrind. I introduced this
bug in 5564c11815, so backpatch this fix to REL_10_STABLE, like that
commit.
While at it, fix a slightly misleading comment, pointed out by David
Rowley.
Since edd44738bc WCO expressions of partitioned tables are
initialized with the first subplan as parent. That's not correct, as
the correct context is the ModifyTableState node. That's also what is
used for RETURNING processing, initialized nearby.
This appears not to cause any visible problems for in core code, but
is problematic for in development patch.
Discussion: https://postgr.es/m/20180303043818.tnvlo243bgy7una3@alap3.anarazel.de
This is analogous to the syntax allowed for VACUUM. This allows us to
avoid making new options reserved keywords and makes it easier to
allow arbitrary argument order. Oh, and it's consistent with the other
commands, too.
Author: Nathan Bossart
Reviewed-By: Michael Paquier, Masahiko Sawada
Discussion: https://postgr.es/m/D3FC73E2-9B1A-4DB4-8180-55F57D116B4E@amazon.com
The LIKE INCLUDING ALL clause to CREATE TABLE intuitively indicates
cloning of extended statistics on the source table, but it failed to do
so. Patch it up so that it does. Also include an INCLUDING STATISTICS
option to the LIKE clause, so that the behavior can be requested
individually, or excluded individually.
While at it, reorder the INCLUDING options, both in code and in docs, in
alphabetical order which makes more sense than feature-implementation
order that was previously used.
Backpatch this to Postgres 10, where extended statistics were
introduced, because this is seen as an oversight in a fresh feature
which is better to get consistent from the get-go instead of changing
only in pg11.
In pg11, comments on statistics objects are cloned too. In pg10 they
are not, because I (Álvaro) was too coward to change the parse node as
required to support it. Also, in pg10 I chose not to renumber the
parser symbols for the various INCLUDING options in LIKE, for the same
reason. Any corresponding user-visible changes (docs) are backpatched,
though.
Reported-by: Stephen Froehlich
Author: David Rowley
Reviewed-by: Álvaro Herrera, Tomas Vondra
Discussion: https://postgr.es/m/CY1PR0601MB1927315B45667A1B679D0FD5E5EF0@CY1PR0601MB1927.namprd06.prod.outlook.com
Commit 34db06ef9a adopted a lock-free
design for shm_mq.c, but it introduced a race condition that could
lose messages. When shm_mq_receive_bytes() detects that the other end
has detached, it must make sure that it has seen the final version of
mq_bytes_written, or it might miss a message sent before detaching.
Thomas Munro
Discussion: https://postgr.es/m/CAEepm%3D2myZ4qxpt1a%3DC%2BwEv3o188K13K3UvD-44FK0SdAzHy%2Bw%40mail.gmail.com
If convert_to_scalar is passed a pair of datatypes it can't cope with,
its former behavior was just to elog(ERROR). While this is OK so far as
the core code is concerned, there's extension code that would like to use
scalarltsel/scalargtsel/etc as selectivity estimators for operators that
work on non-core datatypes, and this behavior is a show-stopper for that
use-case. If we simply allow convert_to_scalar to return FALSE instead of
outright failing, then the main logic of scalarltsel/scalargtsel will work
fine for any operator that behaves like a scalar inequality comparison.
The lack of conversion capability will mean that we can't estimate to
better than histogram-bin-width precision, since the code will effectively
assume that the comparison constant falls at the middle of its bin. But
that's still a lot better than nothing. (Someday we should provide a way
for extension code to supply a custom version of convert_to_scalar, but
today is not that day.)
While poking at this issue, we noted that the existing code for handling
type bytea in convert_to_scalar is several bricks shy of a load.
It assumes without checking that if the comparison value is type bytea,
the bounds values are too; in the worst case this could lead to a crash.
It also fails to detoast the input values, so that the comparison result is
complete garbage if any input is toasted out-of-line, compressed, or even
just short-header. I'm not sure how often such cases actually occur ---
the bounds values, at least, are probably safe since they are elements of
an array and hence can't be toasted. But that doesn't make this code OK.
Back-patch to all supported branches, partly because author requested that,
but mostly because of the bytea bugs. The change in API for the exposed
routine convert_network_to_scalar() is theoretically a back-patch hazard,
but it seems pretty unlikely that any third-party code is calling that
function directly.
Tomas Vondra, with some adjustments by me
Discussion: https://postgr.es/m/b68441b6-d18f-13ab-b43b-9a72188a4e02@2ndquadrant.com
Separate out the pg_attribute logic of genbki.pl into its own function.
Drop unnecessary "defined $catalog->{data}" check. This both narrows
and shortens the data writing loop of the script. There is no functional
change (the emitted files are the same as before).
John Naylor
Discussion: https://postgr.es/m/CAJVSVGXnLH=BSo0x-aA818f=MyQqGS5nM-GDCWAMdnvQJTRC1A@mail.gmail.com
Rationalize a couple of macro names:
* In catalog/pg_init_privs.h, rename Anum_pg_init_privs_privs to
Anum_pg_init_privs_initprivs to match the column's actual name.
* In ecpg, rename ZPBITOID to BITOID to match catalog/pg_type.h.
This reduces reader confusion, and will allow us to generate these
macros automatically in future.
In catalog/pg_tablespace.h, fix the ordering of related DATA and
#define lines to agree with how it's done elsewhere. This has no
impact today, but simplifies life for the bootstrap data conversion
scripts.
John Naylor
Discussion: https://postgr.es/m/CAJVSVGXnLH=BSo0x-aA818f=MyQqGS5nM-GDCWAMdnvQJTRC1A@mail.gmail.com
Sloppy coding in this function could lead to leaking a VM buffer pin,
or to attempting to free the same pin twice. Repair. While at it,
reduce the code's tendency to free and reacquire the same page pin.
Back-patch to 9.6; before that, this routine did not concern itself
with VM pages.
Amit Kapila and Tom Lane
Discussion: https://postgr.es/m/CAA4eK1KJKwhc=isgTQHjM76CAdVswzNeAuZkh_cx-6QgGkSEgA@mail.gmail.com
The new column distinguishes normal functions, procedures, aggregates,
and window functions. This replaces the existing columns proisagg and
proiswindow, and replaces the convention that procedures are indicated
by prorettype == 0. Also change prorettype to be VOIDOID for procedures.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Instead of marking data from the ringer buffer consumed and setting the
sender's latch for every message, do it only when the amount of data we
can consume is at least 1/4 of the size of the ring buffer, or when no
data remains in the ring buffer. This is dramatically faster in my
testing; apparently, the savings from sending signals less frequently
outweighs the benefit of letting the sender know about available buffer
space sooner.
Patch by me, reviewed by Andres Freund and tested by Rafia Sabih.
Discussion: http://postgr.es/m/CA+TgmoYK7RFj6r7KLEfSGtYZCi3zqTRhAz8mcsDbUAjEmLOZ3Q@mail.gmail.com
Previously, mq_bytes_read and mq_bytes_written were protected by the
spinlock, but that turns out to cause pretty serious spinlock
contention on queries which send many tuples through a Gather or
Gather Merge node. This patches changes things so that we instead
read and write those values using 8-byte atomics. Since mq_bytes_read
can only be changed by the receiver and mq_bytes_written can only be
changed by the sender, the only purpose of the spinlock is to prevent
reads and writes of these values from being torn on platforms where
8-byte memory access is not atomic, making the conversion fairly
straightforward.
Testing shows that this produces some slowdown if we're using emulated
64-bit atomics, but since they should be available on any platform
where performance is a primary concern, that seems OK. It's faster,
sometimes a lot faster, on platforms where such atomics are available.
Patch by me, reviewed by Andres Freund, who also suggested the
design. Also tested by Rafia Sabih.
Discussion: http://postgr.es/m/CA+TgmoYuK0XXxmUNTFT9TSNiBtWnRwasBcHHRCOK9iYmDLQVPg@mail.gmail.com
Previously, it just returned the heap tuple count, which might be only an
estimate, and would be completely the wrong thing if the index is partial.
Since this function scans every index page anyway to find free pages,
it's practically free to count the surviving index tuples. Let's do that
and return an accurate count.
This is easily visible as a wrong reltuples value for a partial GiST
index following VACUUM, so back-patch to all supported branches.
Andrey Borodin, reviewed by Michail Nikolaev
Discussion: https://postgr.es/m/151956654251.6915.675951950408204404.pgcf@coridan.postgresql.org
For consistency with other code that deals in numbers of buckets, the
macro BUCKETS_PER_PARTITION should produce a value of type size_t.
Also, fix a mention of an obsolete proposed name for dshash.c that
appeared in a comment.
Author: Thomas Munro, based on an observation from Amit Kapila
Discussion: https://postgr.es/m/CAA4eK1%2BBOp5aaW3aHEkg5Bptf8Ga_BkBnmA-%3DXcAXShs0yCiYQ%40mail.gmail.com
These errors have been seen in the field in corrupted-data situations.
It seems worthwhile to report them with ERRCODE_DATA_CORRUPTED, rather
than the generic ERRCODE_INTERNAL_ERROR, for the benefit of log monitoring
and tools like amcheck. However, use errmsg_internal so that the text
strings still aren't translated; it seems unlikely to be worth
translators' time to do so.
Back-patch to 9.3, like the predecessor commit d70cf811f that introduced
these elog calls originally (replacing Asserts).
Peter Geoghegan
Discussion: https://postgr.es/m/CAH2-Wzmn4-Pg-UGFwyuyK-wiTih9j32pwg_7T9iwqXpAUZr=Mg@mail.gmail.com
Commit 4800f16a7a added some sanity checks to ensure we don't
accidentally corrupt data, but in one of them we failed to consider the
effects of a database upgraded from 9.2 or earlier, where a tuple
exclusively locked prior to the upgrade has a slightly different bit
pattern. Fix that by using the macro that we fixed in commit
74ebba84ae for similar situations.
Reported-by: Alexandre Garcia
Reviewed-by: Andres Freund
Discussion: https://postgr.es/m/CAPYLKR6yxV4=pfW0Gwij7aPNiiPx+3ib4USVYnbuQdUtmkMaEA@mail.gmail.com
Andres suspects that this bug may have wider ranging consequences, but I
couldn't find anything.
Since 9.5, it's possible that some but not all columns of an index
support returning the indexed value for index-only scans. If the
same indexed column appears in index columns that behave both ways,
check_index_only() supposed that it'd be OK to do an index-only scan
testing that column; but that fails if we have to recheck the indexed
condition on one of the columns that doesn't support this.
In principle we could make this work by remapping the recheck expressions
to pull the value from a column that does support returning the indexed
value. But such cases are so weird and rare that, at least for now,
it doesn't seem worth the trouble. Instead, just teach check_index_only
that a value is returnable only if all the index columns containing it
are returnable, rather than any of them.
Per report from David Pereiro Lagares. Back-patch to 9.5 where the
possibility of this situation appeared.
Kyotaro Horiguchi
Discussion: https://postgr.es/m/1516210494.1798.16.camel@nlpgo.com
formrdesc's comment listed the specific catalogs it is called for,
but the list was out of date. Rather than jumping back onto that
maintenance treadmill, let's just remove the list. It tells the
reader nothing that can't be learned quickly and more reliably by
searching relcache.c for callers of formrdesc().
Oversight noted by Kyotaro Horiguchi.
Discussion: https://postgr.es/m/20180214.105314.138966434.horiguchi.kyotaro@lab.ntt.co.jp
Commit a26116c6c accidentally changed the behavior of the SQL format_type()
function while refactoring. For the reasons explained in that function's
comment, a NULL typemod argument should behave differently from a -1
argument. Since we've managed to break this, add a regression test
memorializing the intended behavior.
In passing, be consistent about the type of the "flags" parameter.
Noted by Rushabh Lathia, though I revised the patch some more.
Discussion: https://postgr.es/m/CAGPqQf3RB2q-d2Awp_-x-Ur6aOxTUwnApt-vm-iTtceZxYnePg@mail.gmail.com
Use IndexTupleSize everywhere, instead. Also, remove IndexTupleSize's
internal typecast, as that's not really needed and might mask coding
errors. Change some pointer variable datatypes in the call sites
to compensate for that and make it clearer what we're assuming.
Ildar Musin, Robert Haas, Stephen Frost
Discussion: https://postgr.es/m/0274288e-9e88-13b6-c61c-7b36928bf221@postgrespro.ru
Solaris 11.4 has built-in functions named b64_encode and b64_decode.
Rename ours to something else to avoid the conflict (fortunately,
ours are static so the impact is limited).
One could wish for less duplication of code in this area, but that
would be a larger patch and not very suitable for back-patching.
Since this is a portability fix, we want to put it into all supported
branches.
Report and initial patch by Rainer Orth, reviewed and adjusted a bit
by Michael Paquier
Discussion: https://postgr.es/m/ydd372wk28h.fsf@CeBiTec.Uni-Bielefeld.DE
The previous code considered two tables to have the partition scheme
if the underlying columns had the same collation, but what we
actually need to compare is not the collations associated with the
column but the collation used for partitioning. Fix that.
Robert Haas and Amit Langote
Discussion: http://postgr.es/m/0f95f924-0efa-4cf5-eb5f-9a3d1bc3c33d@lab.ntt.co.jp
Parallel-aware plan nodes must be prepared to run without parallelism
if it's not possible at execution time for whatever reason. Commit
ab72716778, which introduced Parallel
Append, overlooked this.
Rajkumar Raghuwanshi reported this problem, and I included his test
case in this patch. The code changes are by me.
Discussion: http://postgr.es/m/CAKcux6=WqkUudLg1GLZZ7fc5ScWC1+Y9qD=pAHeqy32WoeJQvw@mail.gmail.com
Tom Kazimiers reported that transition tables don't work correctly when
they are scanned by more than one executor node. That's because commit
18ce3a4ab allocated separate read pointers for each executor node, as it
must, but failed to make them active at the appropriate times. Repair.
Thomas Munro
Discussion: https://postgr.es/m/20180224034748.bixarv6632vbxgeb%40dewberry.localdomain
A before-update row trigger may choose to return the "new" or "old" tuple
unmodified. ExecBRUpdateTriggers failed to consider the second
possibility, and would proceed to free the "old" tuple even if it was the
one returned, leading to subsequent access to already-deallocated memory.
In debug builds this reliably leads to an "invalid memory alloc request
size" failure; in production builds it might accidentally work, but data
corruption is also possible.
This is a very old bug. There are probably a couple of reasons it hasn't
been noticed up to now. It would be more usual to return NULL if one
wanted to suppress the update action; returning "old" is significantly less
efficient since the update will occur anyway. Also, none of the standard
PLs would ever cause this because they all returned freshly-manufactured
tuples even if they were just copying "old". But commit 4b93f5799 changed
that for plpgsql, making it possible to see the bug with a plpgsql trigger.
Still, this is certainly legal behavior for a trigger function, so it's
ExecBRUpdateTriggers's fault not plpgsql's.
It seems worth creating a test case that exercises returning "old" directly
with a C-language trigger; testing this through plpgsql seems unreliable
because its behavior might change again.
Report and fix by Rushabh Lathia; regression test case by me.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/CAGPqQf1P4pjiNPrMof=P_16E-DFjt457j+nH2ex3=nBTew7tXw@mail.gmail.com
Commit 3bf05e096b sometimes uses the
cheapest_partial_path variable in this function to mean the cheapest
one from the input rel and at other times the cheapest one from the
partially grouped rel, but it never resets it, so we can end up with
bad plans, leading to "ERROR: Aggref found in non-Agg plan node".
Jeevan Chalke, per a report from Andreas Joseph Krogh and a separate
off-list report from Rajkumar Raghuwanshi
Discussion: http://postgr.es/m/CAM2+6=X9kxQoL2ZqZ00E6asBt9z+rfyWbOmhXJ0+8fPAyMZ9Jg@mail.gmail.com
This makes the client programs behave as documented regardless of the
connect-time search_path and regardless of user-created objects. Today,
a malicious user with CREATE permission on a search_path schema can take
control of certain of these clients' queries and invoke arbitrary SQL
functions under the client identity, often a superuser. This is
exploitable in the default configuration, where all users have CREATE
privilege on schema "public".
This changes behavior of user-defined code stored in the database, like
pg_index.indexprs and pg_extension_config_dump(). If they reach code
bearing unqualified names, "does not exist" or "no schema has been
selected to create in" errors might appear. Users may fix such errors
by schema-qualifying affected names. After upgrading, consider watching
server logs for these errors.
The --table arguments of src/bin/scripts clients have been lax; for
example, "vacuumdb -Zt pg_am\;CHECKPOINT" performed a checkpoint. That
now fails, but for now, "vacuumdb -Zt 'pg_am(amname);CHECKPOINT'" still
performs a checkpoint.
Back-patch to 9.3 (all supported versions).
Reviewed by Tom Lane, though this fix strategy was not his first choice.
Reported by Arseniy Sharoglazov.
Security: CVE-2018-1058
Historically, pg_dump has "set search_path = foo, pg_catalog" when
dumping an object in schema "foo", and has also caused that setting
to be used while restoring the object. This is problematic because
functions and operators in schema "foo" could capture references meant
to refer to pg_catalog entries, both in the queries issued by pg_dump
and those issued during the subsequent restore run. That could
result in dump/restore misbehavior, or in privilege escalation if a
nefarious user installs trojan-horse functions or operators.
This patch changes pg_dump so that it does not change the search_path
dynamically. The emitted restore script sets the search_path to what
was used at dump time, and then leaves it alone thereafter. Created
objects are placed in the correct schema, regardless of the active
search_path, by dint of schema-qualifying their names in the CREATE
commands, as well as in subsequent ALTER and ALTER-like commands.
Since this change requires a change in the behavior of pg_restore
when processing an archive file made according to this new convention,
bump the archive file version number; old versions of pg_restore will
therefore refuse to process files made with new versions of pg_dump.
Security: CVE-2018-1058
Up until now, we've abused grouped_rel->partial_pathlist as a place to
store partial paths that have been partially aggregate, but that's
really not correct, because a partial path for a relation is supposed
to be one which produces the correct results with the addition of only
a Gather or Gather Merge node, and these paths also require a Finalize
Aggregate step. Instead, add a new partially_group_rel which can hold
either partial paths (which need to be gathered and then have
aggregation finalized) or non-partial paths (which only need to have
aggregation finalized). This allows us to reuse generate_gather_paths
for partially_grouped_rel instead of writing new code, so that this
patch actually basically no net new code while making things cleaner,
simplifying things for pending patches for partition-wise aggregate.
Robert Haas and Jeevan Chalke. The larger patch series of which this
patch is a part was also reviewed and tested by Antonin Houska,
Rajkumar Raghuwanshi, David Rowley, Dilip Kumar, Konstantin Knizhnik,
Pascal Legrand, Rafia Sabih, and me.
Discussion: http://postgr.es/m/CA+TgmobrzFYS3+U8a_BCy3-hOvh5UyJbC18rEcYehxhpw5=ETA@mail.gmail.com
Discussion: http://postgr.es/m/CA+TgmoZyQEjdBNuoG9-wC5GQ5GrO4544Myo13dVptvx+uLg9uQ@mail.gmail.com
