temporary indexes are not WAL-logged. We used a constant LSN for temporary
indexes, on the assumption that we don't need to worry about concurrent page
splits in temporary indexes because they're only visible to the current
session. But that assumption is wrong, it's possible to insert rows and
split pages in the same session, while a scan is in progress. For example,
by opening a cursor and fetching some rows, and INSERTing new rows before
fetching some more.
Fix by generating fake increasing LSNs, used in place of real LSNs in
temporary GiST indexes.
The point of a PlaceHolderVar is to allow a non-strict expression to be
evaluated below an outer join, after which its value bubbles up like a Var
and can be forced to NULL when the outer join's semantics require that.
However, there was a serious design oversight in that, namely that we
didn't ensure that there was actually a correct place in the plan tree
to evaluate the placeholder :-(. It may be necessary to delay evaluation
of an outer join to ensure that a placeholder that should be evaluated
below the join can be evaluated there. Per recent bug report from Kirill
Simonov.
Back-patch to 8.4 where the PlaceHolderVar mechanism was introduced.
SI invalidation events, rather than indirectly through the relcache.
In the previous coding, we had to flush a composite-type typcache entry
whenever we discarded the corresponding relcache entry. This caused problems
at least when testing with RELCACHE_FORCE_RELEASE, as shown in recent report
from Jeff Davis, and might result in real-world problems given the kind of
unexpected relcache flush that that test mechanism is intended to model.
The new coding decouples relcache and typcache management, which is a good
thing anyway from a structural perspective. The cost is that we have to
search the typcache linearly to find entries that need to be flushed. There
are a couple of ways we could avoid that, but at the moment it's not clear
it's worth any extra trouble, because the typcache contains very few entries
in typical operation.
Back-patch to 8.2, the same as some other recent fixes in this general area.
The patch could be carried back to 8.0 with some additional work, but given
that it's only hypothetical whether we're fixing any problem observable in
the field, it doesn't seem worth the work now.
Although the key-combining code claimed to work correctly if its input
contained both lossy and exact pointers for a single page in a single TID
stream, in fact this did not work, and could not work without pretty
fundamental redesign. Modify keyGetItem so that it will not return such a
stream, by handling lossy-pointer cases a bit more explicitly than we did
before.
Per followup investigation of a gripe from Artur Dabrowski.
An example of a query that failed given his data set is
select count(*) from search_tab where
(to_tsvector('german', keywords ) @@ to_tsquery('german', 'ee:* | dd:*')) and
(to_tsvector('german', keywords ) @@ to_tsquery('german', 'aa:*'));
Back-patch to 8.4 where the lossy pointer code was introduced.
routines to make them behave better in the presence of "lossy" index pointers.
The previous coding was outright incorrect for some cases, as recently
reported by Artur Dabrowski: scanGetItem would fail to return index entries in
cases where one index key had multiple exact pointers on the same page as
another key had a lossy pointer. Also, keyGetItem was extremely inefficient
for cases where a single index key generates multiple "entry" streams, such as
an @@ operator with a multiple-clause tsquery. The presence of a lossy page
pointer in any one stream defeated its ability to use the opclass
consistentFn, resulting in probing many heap pages that didn't really need to
be visited. In Artur's example case, a query like
WHERE tsvector @@ to_tsquery('a & b')
was about 50X slower than the theoretically equivalent
WHERE tsvector @@ to_tsquery('a') AND tsvector @@ to_tsquery('b')
The way that I chose to fix this was to have GIN call the consistentFn
twice with both TRUE and FALSE values for the in-doubt entry stream,
returning a hit if either call produces TRUE, but not if they both return
FALSE. The code handles this for the case of a single in-doubt entry stream,
but punts (falling back to the stupid behavior) if there's more than one lossy
reference to the same page. The idea could be scaled up to deal with multiple
lossy references, but I think that would probably be wasted complexity. At
least to judge by Artur's example, such cases don't occur often enough to be
worth trying to optimize.
Back-patch to 8.4. 8.3 did not have lossy GIN index pointers, so not
subject to these problems.
look through join alias Vars to avoid breaking join queries, and
move the test to someplace where it will catch more possible ways
of calling a function. We still ought to throw away the whole thing
in favor of a data-type-based solution, but that's not feasible in
the back branches.
Completion of back-port of my patch of yesterday.
a pass-by-reference datatype with a nontrivial projection step.
We were using the same memory context for the projection operation as for
the temporary context used by the hashtable routines in execGrouping.c.
However, the hashtable routines feel free to reset their temp context at
any time, which'd lead to destroying input data that was still needed.
Report and diagnosis by Tao Ma.
Back-patch to 8.1, where the problem was introduced by the changes that
allowed us to work with "virtual" tuples instead of materializing intermediate
tuple values everywhere. The earlier code looks quite similar, but it doesn't
suffer the problem because the data gets copied into another context as a
result of having to materialize ExecProject's output tuple.
being used in a PL/pgSQL FOR loop is closed was inadequate, as Tom Lane
pointed out. The bug affects FOR statement variants too, because you can
close an implicitly created cursor too by guessing the "<unnamed portal X>"
name created for it.
To fix that, "pin" the portal to prevent it from being dropped while it's
being used in a PL/pgSQL FOR loop. Backpatch all the way to 7.4 which is
the oldest supported version.
Backpatch to 8.3, which is as far back as we have opfamilies.
The opclass portion could probably be backpatched to 8.2, when
REASSIGN OWNED was added, but for now I have not done that.
Asko Tiidumaa, with minor adjustments by me.
constraint exclusion on an inheritance set that is the target of an UPDATE
or DELETE query. Per gripe from Marc Cousin. Back-patch to 8.4 where
the feature was introduced.
by a superuser -- "ALTER USER f RESET setting" already disallows removing such a
setting.
Apply the same treatment to ALTER DATABASE d RESET ALL when run by a database
owner that's not superuser.
too, instead of duplicating the functionality (badly).
I renamed xml_init to pg_xml_init, because the former seemed just a bit too
generic to be safe as a global symbol. I considered likewise renaming
xml_ereport to pg_xml_ereport, but felt that the reference to ereport probably
made it sufficiently PG-centric already.
provide a working 64-bit integer datatype. As recently noted, we've been
broken on such platforms since early in the 8.4 development cycle. Since
it took nearly two years for anyone to even notice, it seems that the
rationale for continuing to support such platforms has reached the point
of non-existence. Rather than thrashing around to try to make it work
again, we'll just admit up front that this no longer works.
Back-patch to 8.4 since that branch is also broken.
We should go around to remove INT64_IS_BUSTED support, but just in HEAD,
so that seems like material for a separate commit.
peculiar variant of UNION ALL, and so wouldn't likely get written directly
as-is, it's possible for it to arise as a result of simplification of
less-obviously-silly queries. In particular, now that we can do flattening
of subqueries that have constant outputs and are underneath an outer join,
it's possible for the case to result from simplification of queries of the
type exhibited in bug #5263. Back-patch to 8.4 to avoid a functionality
regression for this type of query.
we have to cope with the possibility that the declared result rowtype contains
dropped columns. This fails in 8.4, as per bug #5240.
While at it, be more paranoid about inserting binary coercions when inlining.
The pre-8.4 code did not really need to worry about that because it could not
inline at all in any case where an added coercion could change the behavior
of the function's statement. However, when inlining a SRF we allow sorting,
grouping, and set-ops such as UNION. In these cases, modifying one of the
targetlist entries that the sort/group/setop depends on could conceivably
change the behavior of the function's statement --- so don't inline when
such a case applies.
an allegedly immutable index function. It was previously recognized that
we had to prevent such a function from executing SET/RESET ROLE/SESSION
AUTHORIZATION, or it could trivially obtain the privileges of the session
user. However, since there is in general no privilege checking for changes
of session-local state, it is also possible for such a function to change
settings in a way that might subvert later operations in the same session.
Examples include changing search_path to cause an unexpected function to
be called, or replacing an existing prepared statement with another one
that will execute a function of the attacker's choosing.
The present patch secures VACUUM, ANALYZE, and CREATE INDEX/REINDEX against
these threats, which are the same places previously deemed to need protection
against the SET ROLE issue. GUC changes are still allowed, since there are
many useful cases for that, but we prevent security problems by forcing a
rollback of any GUC change after completing the operation. Other cases are
handled by throwing an error if any change is attempted; these include temp
table creation, closing a cursor, and creating or deleting a prepared
statement. (In 7.4, the infrastructure to roll back GUC changes doesn't
exist, so we settle for rejecting changes of "search_path" in these contexts.)
Original report and patch by Gurjeet Singh, additional analysis by
Tom Lane.
Security: CVE-2009-4136
in a subtransaction stays open even if the subtransaction is aborted, so
any temporary files related to it must stay alive as well. With the patch,
we use ResourceOwners to track open temporary files and don't automatically
close them at subtransaction end (though in the normal case temporary files
are registered with the subtransaction resource owner and will therefore be
closed).
At end of top transaction, we still check that there's no temporary files
marked as close-at-end-of-transaction open, but that's now just a debugging
cross-check as the resource owner cleanup should've closed them already.
be part of multixacts, so allocate a slot for each prepared transaction in
the "oldest member" array in multixact.c. On PREPARE TRANSACTION, transfer
the oldest member value from the current backends slot to the prepared xact
slot. Also save and recover the value from the 2pc state file.
The symptom of the bug was that after a transaction prepared, a shared lock
still held by the prepared transaction was sometimes ignored by other
transactions.
Fix back to 8.1, where both 2PC and multixact were introduced.
In VACUUM FULL, an interrupt after the initial transaction has been recorded
as committed can cause postmaster to restart with the following error message:
PANIC: cannot abort transaction NNNN, it was already committed
This problem has been reported many times.
In lazy VACUUM, an interrupt after the table has been truncated by
lazy_truncate_heap causes other backends' relcache to still point to the
removed pages; this can cause future INSERT and UPDATE queries to error out
with the following error message:
could not read block XX of relation 1663/NNN/MMMM: read only 0 of 8192 bytes
The window to this race condition is extremely narrow, but it has been seen in
the wild involving a cancelled autovacuum process.
The solution for both problems is to inhibit interrupts in both operations
until after the respective transactions have been committed. It's not a
complete solution, because the transaction could theoretically be aborted by
some other error, but at least fixes the most common causes of both problems.
that it can scribble on scan->xs_ctup.t_self while following HOT chains,
so we can't rely on that to stay valid between hashgettuple() calls.
Introduce a private variable in HashScanOpaque, instead.
hash indexes keep entries sorted by hash value. First, the original plans for
concurrency assumed that insertions would happen only at the end of a page,
which is no longer true; this could cause scans to transiently fail to find
index entries in the presence of concurrent insertions. We can compensate
by teaching scans to re-find their position after re-acquiring read locks.
Second, neither the bucket split nor the bucket compaction logic had been
fixed to preserve hashvalue ordering, so application of either of those
processes could lead to permanent corruption of an index, in the sense
that searches might fail to find entries that are present.
This patch fixes the split and compaction logic to preserve hashvalue
ordering, but it cannot do anything about pre-existing corruption. We will
need to recommend reindexing all hash indexes in the 8.4.2 release notes.
To buy back the performance loss hereby induced in split and compaction,
fix them to use PageIndexMultiDelete instead of retail PageIndexDelete
operations. We might later want to do something with qsort'ing the
page contents rather than doing a binary search for each insertion,
but that seemed more invasive than I cared to risk in a back-patch.
Per bug #5157 from Jeff Janes and subsequent investigation.
for example in
WITH w AS (SELECT * FROM foo) SELECT * FROM w, bar ... FOR UPDATE
the FOR UPDATE will now affect bar but not foo. This is more useful and
consistent than the original 8.4 behavior, which tried to propagate FOR UPDATE
into the WITH query but always failed due to assorted implementation
restrictions. Even though we are in process of removing those restrictions,
it seems correct on philosophical grounds to not let the outer query's
FOR UPDATE affect the WITH query.
In passing, fix isLockedRel which frequently got things wrong in
nested-subquery cases: "FOR UPDATE OF foo" applies to an alias foo in the
current query level, not subqueries. This has been broken for a long time,
but it doesn't seem worth back-patching further than 8.4 because the actual
consequences are minimal. At worst the parser would sometimes get
RowShareLock on a relation when it should be AccessShareLock or vice versa.
That would only make a difference if someone were using ExclusiveLock
concurrently, which no standard operation does, and anyway FOR UPDATE
doesn't result in visible changes so it's not clear that the someone would
notice any problem. Between that and the fact that FOR UPDATE barely works
with subqueries at all in existing releases, I'm not excited about worrying
about it.
Partially revert the previous patch I installed and replace it with a more
general fix: any time a snapshot is pushed as Active, we need to ensure that it
will not be modified in the future. This means that if the same snapshot is
used as CurrentSnapshot, it needs to be copied separately. This affects
serializable transactions only, because CurrentSnapshot has already been copied
by RegisterSnapshot and so PushActiveSnapshot does not think it needs another
copy. However, CommandCounterIncrement would modify CurrentSnapshot, whereas
ActiveSnapshots must not have their command counters incremented.
I say "partially" because the regression test I added for the previous bug
has been kept.
(This restores 8.3 behavior, because before snapmgr.c existed, any snapshot set
as Active was copied.)
Per bug report from Stuart Bishop in
6bc73d4c0910042358k3d1adff3qa36f8df75198ecea@mail.gmail.com
inheritance parent tables are compared using equal(), instead of doing
strcmp() on the nodeToString representation. The old implementation was
always a tad cheesy, and it finally fails completely as of 8.4, now that the
node tree might contain syntax location information. equal() knows it's
supposed to ignore those fields, but strcmp() hardly can. Per recent
report from Scott Ribe.
tuple size limit. Improve the error message for index-tuple-too-large
so that it includes the actual size, the limit, and the index name.
Sync with the btree occurrences of the same error.
Back-patch to 8.4 because it appears that the out-of-sync problem
is occurring in the field.
Teodor and Tom
The old coding was using a regular snapshot, referenced elsewhere, that was
subject to having its command counter updated. Fix by creating a private copy
of the snapshot exclusively for the cursor.
Backpatch to 8.4, which is when the bug was introduced during the snapshot
management rewrite.
code was already okay with this, but the hack that obtained the output
column types of a recursive union in advance of doing real parse analysis
of the recursive union forgot to handle the case where there was an inner
WITH clause available to the non-recursive term. Best fix seems to be to
refactor so that we don't need the "throwaway" parse analysis step at all.
Instead, teach the transformSetOperationStmt code to set up the CTE's output
column information after it's processed the non-recursive term normally.
Per report from David Fetter.
functions.
This extends the previous patch that forbade SETting these variables inside
security-definer functions. RESET is equally a security hole, since it
would allow regaining privileges of the caller; furthermore it can trigger
Assert failures and perhaps other internal errors, since the code is not
expecting these variables to change in such contexts. The previous patch
did not cover this case because assign hooks don't really have enough
information, so move the responsibility for preventing this into guc.c.
Problem discovered by Heikki Linnakangas.
Security: no CVE assigned yet, extends CVE-2007-6600
that's generated for a whole-row Var referencing the subquery, when the
subquery is in the nullable side of an outer join. The previous coding
instead put PlaceHolderVars around the elements of the RowExpr. The effect
was that when the outer join made the subquery outputs go to null, the
whole-row Var produced ROW(NULL,NULL,...) rather than just NULL. There
are arguments afoot about whether those things ought to be semantically
indistinguishable, but for the moment they are not entirely so, and the
planner needs to take care that its machinations preserve the difference.
Per bug #5025.
Making this feasible required refactoring ResolveNew() to allow more caller
control over what is substituted for a Var. I chose to make ResolveNew()
a wrapper around a new general-purpose function replace_rte_variables().
I also fixed the ancient bogosity that ResolveNew might fail to set
a query's hasSubLinks field after inserting a SubLink in it. Although
all current callers make sure that happens anyway, we've had bugs of that
sort before, and it seemed like a good time to install a proper solution.
Back-patch to 8.4. The problem can be demonstrated clear back to 8.0,
but the fix would be too invasive in earlier branches; not to mention
that people may be depending on the subtly-incorrect behavior. The
8.4 series is new enough that fixing this probably won't cause complaints,
but it might in older branches. Also, 8.4 shows the incorrect behavior
in more cases than older branches do, because it is able to flatten
subqueries in more cases.
so that their elements are always taken as simple expressions over the
query's input columns. It originally seemed like a good idea to make them
act exactly like GROUP BY and ORDER BY, right down to the SQL92-era behavior
of accepting output column names or numbers. However, that was not such a
great idea, for two reasons:
1. It permits circular references, as exhibited in bug #5018: the output
column could be the one containing the window function itself. (We actually
had a regression test case illustrating this, but nobody thought twice about
how confusing that would be.)
2. It doesn't seem like a good idea for, eg, "lead(foo) OVER (ORDER BY foo)"
to potentially use two completely different meanings for "foo".
Accordingly, narrow down the behavior of window clauses to use only the
SQL99-compliant interpretation that the expressions are simple expressions.
"all tuples visible" flag in heap page headers. The flag update *must*
be applied before calling XLogInsert, but heap_update and the tuple
moving routines in VACUUM FULL were ignoring this rule. A crash and
replay could therefore leave the flag incorrectly set, causing rows
to appear visible in seqscans when they should not be. This might explain
recent reports of data corruption from Jeff Ross and others.
In passing, do a bit of editorialization on comments in visibilitymap.c.
values before they get passed to the index access method. This avoids
repeated detoastings that will otherwise ensue as the comparison value
is examined by various index support functions. We have seen a couple of
reports of cases where repeated detoastings result in an order-of-magnitude
slowdown, so it seems worth adding a bit of extra logic to prevent this.
I had previously proposed trying to avoid duplicate detoastings in general,
but this fix takes care of what seems the most important case in practice
with very little effort or risk.
Back-patch to 8.4 so that the PostGIS folk won't have to wait a year to
have this fix in a production release. (The issue exists further back,
of course, but the code's diverged enough to make backpatching further a
higher-risk action. Also it appears that the possible gains may be limited
in prior releases because of different handling of lossy operators.)
that memory allocated by starting third party DLLs doesn't end up
conflicting with it.
Hopefully this solves the long-time issue with "could not reattach
to shared memory" errors on Win32.
Patch from Tsutomu Yamada and me, based on idea from Trevor Talbot.
The original coding was not dealing specially with this file being a symlink,
with the end result that it was not installed in VPATH builds. Oddly enough,
the clean target does know about it ...
memory leakage in error recovery. We were calling FreeExprContext, and
therefore invoking ExprContextCallback callbacks, in both normal and error
exits from subtransactions. However this isn't very safe, as shown in
recent trouble report from Frank van Vugt, in which releasing a tupledesc
refcount failed. It's also unnecessary, since the resources that callbacks
might wish to release should be cleaned up by other error recovery mechanisms
(ie the resource owners). We only really want FreeExprContext to release
memory attached to the exprcontext in the error-exit case. So, add a bool
parameter to FreeExprContext to tell it not to call the callbacks.
A more general solution would be to pass the isCommit bool parameter on to
the callbacks, so they could do only safe things during error exit. But
that would make the patch significantly more invasive and possibly break
third-party code that registers ExprContextCallback callbacks. We might want
to do that later in HEAD, but for now I'll just do what seems reasonable to
back-patch.
substituting a child rel's output expressions into the appendrel's restriction
clauses yields a pseudoconstant restriction. We might be able to skip scanning
that child rel entirely (if we get constant FALSE), or generate a one-time
filter. 8.3 more or less accidentally generated plans that weren't completely
stupid in these cases, but that was only because an extra recursive level of
subquery_planner() always occurred and allowed const-simplification to happen.
8.4's ability to pull up appendrel members with non-Var outputs exposes the
fact that we need to work harder here. Per gripe from Sergey Burladyan.
archive recovery. Invent a separate state variable and inquiry function
for XLogInsertAllowed() to clarify some tests and make the management of
writing the end-of-recovery checkpoint less klugy. Fix several places
that were incorrectly testing InRecovery when they should be looking at
RecoveryInProgress or XLogInsertAllowed (because they will now be executed
in the bgwriter not startup process). Clarify handling of bad LSNs passed
to XLogFlush during recovery. Use a spinlock for setting/testing
SharedRecoveryInProgress. Improve quite a lot of comments.
Heikki and Tom
during it:
When bgwriter is active, the startup process can't perform mdsync() correctly
because it won't see the fsync requests accumulated in bgwriter's private
pendingOpsTable. Therefore make bgwriter responsible for the end-of-recovery
checkpoint as well, when it's active.
When bgwriter is active (= archive recovery), the startup process must not
accumulate fsync requests to its own pendingOpsTable, since bgwriter won't
see them there when it performs restartpoints. Make startup process drop its
pendingOpsTable when bgwriter is launched to avoid that.
Update minimum recovery point one last time when leaving archive recovery.
It won't be updated by the end-of-recovery checkpoint because XLogFlush()
sees us as out of recovery already.
This fixes bug #4879 reported by Fujii Masao.
types in CREATE TRIGGER. While at it, clean up the amazingly tedious and
inextensible way that the trigger event type list was handled. Per report
from Greg Sabino Mullane.
will throw an error, rather than possibly allowing someone to synthesize
a manual call to an internal-accepting function. As of CVS HEAD and existing
releases, all such functions are either STRICT or careful about null inputs,
so there is no current security issue here. But it seems like a good idea
to lock this down to protect against future mistakes.
In passing, similarly lock down trigger_in, language_handler_in, opaque_in,
and shell_in. These are not believed to present any security risk, but
there's still no good reason to allow nulls of these types to be created.
I left the polymorphic pseudotypes (anyelement etc) alone, since a null
of one of those types doesn't seem to be a problem --- the worst you can
say about it is that it doesn't have an underlying non-polymorphic type.
If we were to make this change during normal development, we'd just
automatically bump catversion for a pg_proc.h change. But since this doesn't
create a compatibility risk and isn't believed to be fixing a live bug, it
seems better not to force a catversion bump in late beta.
behavior in cases where we don't know the heap tuple count accurately; in
particular partial vacuum, but this also makes the API a bit more useful
for ANALYZE. This patch adds "estimated_count" flags to both structs so
that an approximate count can be flagged as such, and adjusts the logic
so that approximate counts are not used for updating pg_class.reltuples.
This fixes my previous complaint that VACUUM was putting ridiculous values
into pg_class.reltuples for indexes. The actual impact of that bug is
limited, because the planner only pays attention to reltuples for an index
if the index is partial; which probably explains why beta testers hadn't
noticed a degradation in plan quality from it. But it needs to be fixed.
The whole thing is a bit messy and should be redesigned in future, because
reltuples now has the potential to drift quite far away from reality when
a long period elapses with no non-partial vacuums. But this is as good as
it's going to get for 8.4.
is supposed to remove duplicate heap TIDs, we have to be sure to reduce the
tuple size and posting-item count accordingly in addItemPointersToTuple().
Failing to do so resulted in the effective injection of garbage TIDs into the
index contents, ie, whatever happened to be in the memory palloc'd for the
new tuple. I'm not sure that this fully explains the index corruption
reported by Tatsuo Ishii, but the test case I'm using no longer fails.
should use GinItemPointerGetBlockNumber/GinItemPointerGetOffsetNumber,
not ItemPointerGetBlockNumber/ItemPointerGetOffsetNumber, because the latter
will Assert() on ip_posid == 0, ie a "Min" pointer. (Thus, ItemPointerIsMin
has never worked at all, but it seems unused at present.) I'm not certain
that the case can occur in normal functioning, but it's blowing up on me
while investigating Tatsuo-san's data corruption problem. In any case it
seems like a problem waiting to bite someone.
Back-patch just in case this really is a problem for somebody in the field.
by extending the ereport() API to cater for pluralization directly. This
is better than the original method of calling ngettext outside the elog.c
code because (1) it avoids double translation, which wastes cycles and in
the worst case could give a wrong result; and (2) it avoids having to use
a different coding method in PL code than in the core backend. The
client-side uses of ngettext are not touched since neither of these concerns
is very pressing in the client environment. Per my proposal of yesterday.
YEAR, DECADE, CENTURY, or MILLENIUM fields, just as it always has done for
other types of fields. The previous behavior seems to have been a hack to
avoid defining bit-positions for all these field types in DTK_M() masks,
rather than something that was really considered to be desired behavior.
But there is room in the masks for these, and we really need to tighten up
at least the behavior of DAY and YEAR fields to avoid unexpected behavior
associated with the 8.4 changes to interpret ambiguous fields based on the
interval qualifier (typmod) value. Per my example and proposed patch.
redirecting libxml's allocations into a Postgres context. Instead, just let
it use malloc directly, and add PG_TRY blocks as needed to be sure we release
libxml data structures in error recovery code paths. This is ugly but seems
much more likely to play nicely with third-party uses of libxml, as seen in
recent trouble reports about using Perl XML facilities in pl/perl and bug
#4774 about contrib/xml2.
I left the code for allocation redirection in place, but it's only
built/used if you #define USE_LIBXMLCONTEXT. This is because I found it
useful to corral libxml's allocations in a palloc context when hunting
for libxml memory leaks, and we're surely going to have more of those
in the future with this type of approach. But we don't want it turned on
in a normal build because it breaks exactly what we need to fix.
I have not re-indented most of the code sections that are now wrapped
by PG_TRY(); that's for ease of review. pg_indent will fix it.
This is a pre-existing bug in 8.3, but I don't dare back-patch this change
until it's gotten a reasonable amount of field testing.
errors when tables are concurrently dropped. To do this we must take lock
on each relation before we check its privileges. The old code was trying
to do that the other way around, which is a bit pointless when there are lots
of other commands that lock relations before checking privileges. I did keep
it checking each relation's privilege before locking the next relation, which
is a detail that ALTER TABLE isn't too picky about.
ability to lock relations as they scan pg_inherits, and to ignore any
relations that have disappeared by the time we get lock on them. This
makes uses of these functions safe against concurrent DROP operations
on child tables: we will effectively ignore any just-dropped child,
rather than possibly throwing an error as in recent bug report from
Thomas Johansson (and similar past complaints). The behavior should
not change otherwise, since the code was acquiring those same locks
anyway, just a little bit later.
An exception is LockTableCommand(), which is still behaving unsafely;
but that seems to require some more discussion before we change it.
find_inheritance_children() and find_all_inheritors(). I got annoyed that
these are buried inside the planner but mostly used elsewhere. So, create
a new file catalog/pg_inherits.c and put them there, along with a couple
of other functions that search pg_inherits.
The code that modifies pg_inherits is (still) in tablecmds.c --- it's
kind of entangled with unrelated code that modifies pg_depend and other
stuff, so pulling it out seemed like a bigger change than I wanted to make
right now. But this file provides a natural home for it if anyone ever
gets around to that.
This commit just moves code around; it doesn't change anything, except
I succumbed to the temptation to make a couple of trivial optimizations
in typeInheritsFrom().
joins a bit better, ie, understand the differing cost functions for matched
and unmatched outer tuples. There is more that could be done in cost_hashjoin
but this already helps a great deal. Per discussions with Robert Haas.
a toast table to be built, even if the sum-of-column-widths calculation
indicates one isn't needed. This is needed by pg_migrator because if the
old table has a toast table, we have to migrate over the toast table since
it might contain some live data, even though subsequent column drops could
mean that no recently-added rows could require toasting.
a backend has done exit(0) or exit(1) without having disengaged itself
from shared memory. We are at risk for this whenever third-party code is
loaded into a backend, since such code might not know it's supposed to go
through proc_exit() instead. Also, it is reported that under Windows
there are ways to externally kill a process that cause the status code
returned to the postmaster to be indistinguishable from a voluntary exit
(thank you, Microsoft). If this does happen then the system is probably
hosed --- for instance, the dead session might still be holding locks.
So the best recovery method is to treat this like a backend crash.
The dead man switch is armed for a particular child process when it
acquires a regular PGPROC, and disarmed when the PGPROC is released;
these should be the first and last touches of shared memory resources
in a backend, or close enough anyway. This choice means there is no
coverage for auxiliary processes, but I doubt we need that, since they
shouldn't be executing any user-provided code anyway.
This patch also improves the management of the EXEC_BACKEND
ShmemBackendArray array a bit, by reducing search costs.
Although this problem is of long standing, the lack of field complaints
seems to mean it's not critical enough to risk back-patching; at least
not till we get some more testing of this mechanism.
PlaceHolderVar nodes in join quals appearing in or below the lowest
outer join that could null the subquery being pulled up. This improves
the planner's ability to recognize constant join quals, and probably
helps with detection of common sort keys (equivalence classes) as well.
fact that this is breaking the MSVC build, it's probably not really a good
idea to expand the dependencies of gram.h any further than the core parser;
for instance the value of SCONST might depend on which bison version you'd
built with. Better to expose an additional call point in parser.c, so
move what I had put into pl_funcs.c into parser.c. Also PGDLLIMPORT'ify
the reference to standard_conforming_strings, per buildfarm results.
Stefan Kaltenbrunner. The most reasonable behavior (at least for the near
term) seems to be to ignore the PlaceHolderVar and examine its argument
instead. In support of this, change the API of pull_var_clause() to allow
callers to request recursion into PlaceHolderVars. Currently
estimate_num_groups() is the only customer for that behavior, but where
there's one there may be others.
constants through full joins, as in
select * from tenk1 a full join tenk1 b using (unique1)
where unique1 = 42;
which should generate a fairly cheap plan where we apply the constraint
unique1 = 42 in each relation scan. This had been broken by my patch of
2008-06-27, which is now reverted in favor of a more invasive but hopefully
less incorrect approach. That patch was meant to prevent incorrect extraction
of OR'd indexclauses from OR conditions above an outer join. To do that
correctly we need more information than the outerjoin_delay flag can provide,
so add a nullable_relids field to RestrictInfo that records exactly which
relations are nulled by outer joins that are underneath a particular qual
clause. A side benefit is that we can make the test in create_or_index_quals
more specific: it is now smart enough to extract an OR'd indexclause into the
outer side of an outer join, even though it must not do so in the inner side.
The old coding couldn't distinguish these cases so it could not do either.
how this ought to behave for multi-dimensional arrays. Per discussion,
not having it at all seems better than having it with what might prove
to be the wrong behavior. We can always add it later when we have consensus
on the correct behavior.
already did that on Windows, but it's needed on other platforms too when
LC_CTYPE=C. With other locales, we enforce (or trust) that the codeset of
the locale matches the server encoding so we don't need to bind it
explicitly. It should do no harm in that case either, but I don't have
full faith in the PG encoding -> OS codeset mapping table yet. Per recent
discussion on pgsql-hackers.
the checkpoint in immediate or lazy mode. This is to address complaints
that pg_start_backup() takes a long time even when there's no need to minimize
its I/O consumption.
alias for array_length(v,1). The efficiency gain here is doubtless
negligible --- what I'm interested in is making sure that if we have
second thoughts about the definition, we will not have to force a
post-beta initdb to change the implementation.
are individually labeled, rather than just grouped under an "InitPlan"
or "SubPlan" heading. This in turn makes it possible for decompilation of
a subplan reference to usefully identify which subplan it's referencing.
I also made InitPlans identify which parameter symbol(s) they compute,
so that references to those parameters elsewhere in the plan tree can
be connected to the initplan that will be executed. Per a gripe from
Robert Haas about EXPLAIN output of a WITH query being inadequate,
plus some longstanding pet peeves of my own.
are using our own ports of getopt or getopt_long, those will define
the variable for themselves; and if not, we don't need these, because
we never touch the variable anyway.
provides optreset. Current mastodon results prove that in fact it
does not; it was only because getopt.c defined the variable anyway
that things failed to fall over.
of adding optional namespace and action fields to DefElem. Having three
node types that do essentially the same thing bloats the code and leads
to errors of confusion, such as in yesterday's bug report from Khee Chin.
when we are waiting for old snapshots to go away during a concurrent index
build. In particular, this rule lets us avoid waiting for
idle-in-transaction sessions.
This logic could be improved further if we had some way to wake up when
the session we are currently waiting for goes idle-in-transaction. However
that would be a significantly more complex/invasive patch, so it'll have to
wait for some other day.
Simon Riggs, with some improvements by Tom.
To implement this without almost duplicating the reloption table, treat
relopt_kind as a bitmask instead of an integer value. This decreases the
range of allowed values, but it's not clear that there's need for that much
values anyway.
This patch also makes heap_reloptions explicitly a no-op for relation kinds
other than heap and TOAST tables.
Patch by ITAGAKI Takahiro with minor edits from me. (In particular I removed
the bit about adding relation kind to an error message, which I intend to
commit separately.)
for simple Var targetlist entries all the time, even when there are other
entries that are not simple Vars. Also, ensure that we prefetch attributes
(with slot_getsomeattrs) for all Vars in the targetlist, even those buried
within expressions. In combination these changes seem to significantly
reduce the runtime for cases where tlists are mostly but not exclusively
Vars. Per my proposal of yesterday.
conversion functions. This allows transaction rollback to revert to a
previous client_encoding setting without doing fresh catalog lookups.
I believe that this explains and fixes the recent report of "failed to commit
client_encoding" failures.
This bug is present in 8.3.x, but it doesn't seem prudent to back-patch
the fix, at least not till it's had some time for field testing in HEAD.
In passing, remove SetDefaultClientEncoding(), which was used nowhere.
temp relations; this is no more expensive than before, now that we have
pg_class.relistemp. Insert tests into bufmgr.c to prevent attempting
to fetch pages from nonlocal temp relations. This provides a low-level
defense against bugs-of-omission allowing temp pages to be loaded into shared
buffers, as in the contrib/pgstattuple problem reported by Stuart Bishop.
While at it, tweak a bunch of places to use new relcache tests (instead of
expensive probes into pg_namespace) to detect local or nonlocal temp tables.
relations (including a temp table's indexes and toast table/index), and
false for normal relations. For ease of checking, this commit just adds
the column and fills it correctly --- revising the relation access machinery
to use it will come separately.
TupleTableSlots. We have functions for retrieving a minimal tuple from a slot
after storing a regular tuple in it, or vice versa; but these were implemented
by converting the internal storage from one format to the other. The problem
with that is it invalidates any pass-by-reference Datums that were already
fetched from the slot, since they'll be pointing into the just-freed version
of the tuple. The known problem cases involve fetching both a whole-row
variable and a pass-by-reference value from a slot that is fed from a
tuplestore or tuplesort object. The added regression tests illustrate some
simple cases, but there may be other failure scenarios traceable to the same
bug. Note that the added tests probably only fail on unpatched code if it's
built with --enable-cassert; otherwise the bug leads to fetching from freed
memory, which will not have been overwritten without additional conditions.
Fix by allowing a slot to contain both formats simultaneously; which turns out
not to complicate the logic much at all, if anything it seems less contorted
than before.
Back-patch to 8.2, where minimal tuples were introduced.
mode while callers hold pointers to in-memory tuples. I reported this for
the case of nodeWindowAgg's primary scan tuple, but inspection of the code
shows that all of the calls in nodeWindowAgg and nodeCtescan are at risk.
For the moment, fix it with a rather brute-force approach of copying
whenever one of the at-risk callers requests a tuple. Later we might
think of some sort of reference-count approach to reduce tuple copying.
In the backend, I changed only a handful of exemplary or important-looking
instances to make use of the plural support; there is probably more work
there. For the rest of the source, this should cover all relevant cases.
"physical tlist" optimization on the outer relation (ie, force a projection
step to occur in its scan). This avoids storing useless column values when
the outer relation's tuples are written to temporary batch files.
Modified version of a patch by Michael Henderson and Ramon Lawrence.
