The test did not wait for all the subscriptions to have caught up when
dropping the subscription "tab_copy". In a slow environment, it could
be possible for the replay of the COMMIT PREPARED transaction "mygid"
to not be confirmed yet, causing one prepared transaction to be left
around before moving to the next steps of the test.
One failure noticed is a transaction found in pg_prepared_xacts for the
cases where copy_data = false and two_phase = true, but there should be
none after dropping the subscription.
As an extra safety measure, a check is added before dropping the
subscription, scanning pg_prepared_xacts to make sure that no prepared
transactions are left once both subscriptions have caught up.
Issue introduced by a8fd13cab0, fixing a problem similar to
eaf5321c35.
Per buildfarm member kestrel.
Author: Vignesh C <vignesh21@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/CALDaNm329QaZ+bwU--bW6GjbNSZ8-38cDE8QWofafub7NV67oA@mail.gmail.com
Backpatch-through: 15
After executing ALTER SUBSCRIPTION tap_sub SET PUBLICATION, we did not
wait for the new walsender process to restart. As a result, an INSERT
executed immediately after the ALTER could be decoded and skipped,
considering it is not part of any subscribed publication. And, the old
apply worker could also confirm the LSN of such an INSERT. This could
cause the replication to resume from a point after the INSERT. In such
cases, we miss the expected warning about the missing publication.
To fix this, ensure the walsender has restarted before continuing after
ALTER SUBSCRIPTION.
Reported-by: Tom Lane as per CI
Author: vignesh C <vignesh21@gmail.com>
Reviewed-by: Xuneng Zhou <xunengzhou@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/1230066.1745992333@sss.pgh.pa.us
Commit 3f28b2fcac tried to ensure that the replication origin shouldn't be
advanced in case of an ERROR in the apply worker, so that it can request
the same data again after restart. However, it is possible that an ERROR
was caught and handled by a (say PL/pgSQL) function, and the apply worker
continues to apply further changes, in which case, we shouldn't reset the
replication origin.
Ensure to reset the origin only when the apply worker exits after an
ERROR.
Commit 3f28b2fcac added new function geterrlevel, which we removed in HEAD
as part of this commit, but kept it in backbranches to avoid breaking any
applications. A separate case can be made to have such a function even for
HEAD.
Reported-by: Shawn McCoy <shawn.the.mccoy@gmail.com>
Author: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: vignesh C <vignesh21@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Backpatch-through: 16, where it was introduced
Discussion: https://postgr.es/m/CALsgZNCGARa2mcYNVTSj9uoPcJo-tPuWUGECReKpNgTpo31_Pw@mail.gmail.com
exec_replication_command created a cmd_context to work in and
then deleted it on exit. This is pretty dangerous because
some replication commands start/finish transactions. In the
wake of commit 1afe31f03, that could lead to re-selecting a
CurrentMemoryContext that's already been deleted, leading to
hilarity such as a memory context that is its own parent.
To fix, let's make the cmd_context persist across
exec_replication_command calls; instead of deleting it, we'll just
reset it each time. In this way it retains the same identity and
there's no problem if transaction abort restores it as the working
context. It probably even saves a few microseconds to do this.
This fix also ensures that exec_replication_command returns to the
caller (PostgresMain) with the same context active that had been
when it was called (probably MessageContext). The previous
coding could get that wrong too.
Reported-by: Anthonin Bonnefoy <anthonin.bonnefoy@datadoghq.com>
Author: Anthonin Bonnefoy <anthonin.bonnefoy@datadoghq.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAO6_XqoJA7-_G6t7Uqe5nWF3nj+QBGn4F6Ptp=rUGDr0zo+KvA@mail.gmail.com
The issue happens when building conflict information during apply of
INSERT or UPDATE operations that violate unique constraints on leaf
partitions.
The problem was introduced in commit 9ff68679b5, which removed the
redundant calls to ExecOpenIndices/ExecCloseIndices. The previous code was
relying on the redundant ExecOpenIndices call in
apply_handle_tuple_routing() to build the index information required for
unique key conflict detection.
The fix is to delay building the index information until a conflict is
detected instead of relying on ExecOpenIndices to do the same. The
additional benefit of this approach is that it avoids building index
information when there is no conflict.
Author: Hou Zhijie <houzj.fnst@fujitsu.com>
Reviewed-by:Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/TYAPR01MB57244ADA33DDA57119B9D26494A62@TYAPR01MB5724.jpnprd01.prod.outlook.com
WAL senders do not flush their statistics until they exit, limiting the
monitoring possible for live processes. This is penalizing when WAL
senders are running for a long time, like in streaming or logical
replication setups, because it is not possible to know the amount of IO
they generate while running.
This commit makes WAL senders more aggressive with their statistics
flush, using an internal of 1 second, with the flush timing calculated
based on the existing GetCurrentTimestamp() done before the sleeps done
to wait for some activity. Note that the sleep done for logical and
physical WAL senders happens in two different code paths, so the stats
flushes need to happen in these two places.
One test is added for the physical WAL sender case, and one for the
logical WAL sender case. This can be done in a stable fashion by
relying on the WAL generated by the TAP tests in combination with a
stats reset while a server is running, but only on HEAD as WAL data has
been added to pg_stat_io in a051e71e28.
This issue exists since a9c70b46db and the introduction of pg_stat_io,
so backpatch down to v16.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: vignesh C <vignesh21@gmail.com>
Reviewed-by: Xuneng Zhou <xunengzhou@gmail.com>
Discussion: https://postgr.es/m/Z73IsKBceoVd4t55@ip-10-97-1-34.eu-west-3.compute.internal
Backpatch-through: 16
The problem is that after the ALTER SUBSCRIPTION tap_sub SET PUBLICATION
command, we didn't wait for the new walsender to start on the publisher.
Immediately after ALTER, we performed Insert and expected it to replicate.
However, the replication could start from a point after the INSERT location,
and as the subscription isn't copying initial data, we could miss such an
Insert.
The fix is to wait for connection to be established between publisher and
subscriber before starting DML operations that are expected to replicate.
As per CI.
Reported-by: Andres Freund <andres@anarazel.de>
Author: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Discussion: https://postgr.es/m/CALDaNm2ms1deM5EYNLFEfESv_Kw=Y4AiTB0LP=qGS-UpFwGbPg@mail.gmail.com
Introduce a new conflict type, multiple_unique_conflicts, to handle cases
where an incoming row during logical replication violates multiple UNIQUE
constraints.
Previously, the apply worker detected and reported only the first
encountered key conflict (insert_exists/update_exists), causing repeated
failures as each constraint violation needs to be handled one by one
making the process slow and error-prone.
With this patch, the apply worker checks all unique constraints upfront
once the first key conflict is detected and reports
multiple_unique_conflicts if multiple violations exist. This allows users
to resolve all conflicts at once by deleting all conflicting tuples rather
than dealing with them individually or skipping the transaction.
In the future, this will also allow us to specify different resolution
handlers for such a conflict type.
Add the stats for this conflict type in pg_stat_subscription_stats.
Author: Nisha Moond <nisha.moond412@gmail.com>
Author: Zhijie Hou <houzj.fnst@fujitsu.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Discussion: https://postgr.es/m/CABdArM7FW-_dnthGkg2s0fy1HhUB8C3ELA0gZX1kkbs1ZZoV3Q@mail.gmail.com
The problem is that ALTER SUBSCRIPTION ... SET PUBLICATION ... will lead
to restarting of apply worker and after the restart, the apply worker will
use the existing slot and replication origin corresponding to the
subscription. Now, it is possible that before the restart, the origin has
not been updated, and the WAL start location points to a location before
where PUBLICATION pointed to by SET PUBLICATION doesn't exist, and that
can lead to an error like: "ERROR: publication "pub1" does not exist".
Once this error occurs, apply worker will never be able to proceed and
will always return the same error.
We decided to skip loading the publication if the publication does not
exist. The publication is loaded later and updates the relation entry when
the publication gets created.
We decided not to backpatch this as this is a behaviour change, and we don't
see field reports. This problem has been found by intermittent buildfarm
failures.
Author: vignesh C <vignesh21@gmail.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/flat/CALDaNm0-n8FGAorM%2BbTxkzn%2BAOUyx5%3DL_XmnvOP6T24%2B-NcBKg%40mail.gmail.com
Discussion: https://postgr.es/m/CAA4eK1+T-ETXeRM4DHWzGxBpKafLCp__5bPA_QZfFQp7-0wj4Q@mail.gmail.com
On Publication rename, we need to only invalidate the RelationSyncCache
entries corresponding to relations that are part of the publication being
renamed.
As part of this patch, we introduce a new invalidation message to
invalidate the cache maintained by the logical decoding output plugin. We
can't use existing relcache invalidation for this purpose, as that would
unnecessarily cause relcache invalidations in other backends.
This will improve performance by building fewer relation cache entries
during logical replication.
Author: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Author: Shlok Kyal <shlok.kyal.oss@gmail.com>
Reviewed-by: Hou Zhijie <houzj.fnst@fujitsu.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/OSCPR01MB14966C09AA201EFFA706576A7F5C92@OSCPR01MB14966.jpnprd01.prod.outlook.com
Previously, a WARNING was issued at the time of defining a subscription
with origin=NONE only when the publisher subscribed to the same table from
other publishers, indicating potential data origination from different
origins. However, the publisher can subscribe to the partition ancestors
or partition children of the table from other publishers, which could also
result in mixed-origin data inclusion. So, give a WARNING in those cases
as well.
Reported-by: Sergey Tatarintsev <s.tatarintsev@postgrespro.ru>
Author: Hou Zhijie <houzj.fnst@fujitsu.com>
Author: Shlok Kyal <shlok.kyal.oss@gmail.com>
Reviewed-by: Vignesh C <vignesh21@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Backpatch-through: 16, where it was introduced
Discussion: https://postgr.es/m/5eda6a9c-63cf-404d-8a49-8dcb116a29f3@postgrespro.ru
Logical replication crashes if the subscriber's partitioned table
has a BRIN index. There are two independently blamable causes,
and this patch fixes both:
1. brininsertcleanup fails if called twice for the same IndexInfo,
because it half-destroys its BrinInsertState but leaves it still
linked from ii_AmCache. brininsert would also fail in that state,
so it's pretty hard to see any advantage to this coding. Fully
remove the BrinInsertState, instead, so that a new brininsert
call would create a new cache.
2. A logical replication subscriber sometimes does ExecOpenIndices
twice on the same ResultRelInfo, followed by doing ExecCloseIndices
twice; the second call reaches the brininsertcleanup bug. Quite
aside from tickling unexpected cases in aminsertcleanup methods,
this seems very wasteful, because the IndexInfos built in the
first ExecOpenIndices call are just lost during the second call,
and have to be rebuilt at possibly-nontrivial cost. We should
establish a coding rule that you don't do that.
The problematic coding is that when the target table is partitioned,
apply_handle_tuple_routing calls ExecFindPartition which does
ExecOpenIndices (and expects that ExecCleanupTupleRouting will
close the indexes again). Using the ResultRelInfo made by
ExecFindPartition, it calls apply_handle_delete_internal or
apply_handle_insert_internal, both of which think they need to do
ExecOpenIndices/ExecCloseIndices for themselves. They do in the main
non-partitioned code paths, but not here. The simplest fix is to pull
their ExecOpenIndices/ExecCloseIndices calls out and put them in the
call sites for the non-partitioned cases. (We could have refactored
apply_handle_update_internal similarly, but I did not do so today
because there's no bug there: the partitioned code path doesn't
call it.)
Also, remove the always-duplicative open/close calls within
apply_handle_tuple_routing itself.
Since brininsertcleanup and indeed the whole aminsertcleanup mechanism
are new in v17, there's no observable bug in older branches. A case
could be made for trying to avoid these duplicative open/close calls
in the older branches, but for now it seems not worth the trouble and
risk of new bugs.
Bug: #18815
Reported-by: Sergey Belyashov <sergey.belyashov@gmail.com>
Discussion: https://postgr.es/m/18815-2a0407cc7f40b327@postgresql.org
Backpatch-through: 17
This adds a new variant of generated columns that are computed on read
(like a view, unlike the existing stored generated columns, which are
computed on write, like a materialized view).
The syntax for the column definition is
... GENERATED ALWAYS AS (...) VIRTUAL
and VIRTUAL is also optional. VIRTUAL is the default rather than
STORED to match various other SQL products. (The SQL standard makes
no specification about this, but it also doesn't know about VIRTUAL or
STORED.) (Also, virtual views are the default, rather than
materialized views.)
Virtual generated columns are stored in tuples as null values. (A
very early version of this patch had the ambition to not store them at
all. But so much stuff breaks or gets confused if you have tuples
where a column in the middle is completely missing. This is a
compromise, and it still saves space over being forced to use stored
generated columns. If we ever find a way to improve this, a bit of
pg_upgrade cleverness could allow for upgrades to a newer scheme.)
The capabilities and restrictions of virtual generated columns are
mostly the same as for stored generated columns. In some cases, this
patch keeps virtual generated columns more restricted than they might
technically need to be, to keep the two kinds consistent. Some of
that could maybe be relaxed later after separate careful
considerations.
Some functionality that is currently not supported, but could possibly
be added as incremental features, some easier than others:
- index on or using a virtual column
- hence also no unique constraints on virtual columns
- extended statistics on virtual columns
- foreign-key constraints on virtual columns
- not-null constraints on virtual columns (check constraints are supported)
- ALTER TABLE / DROP EXPRESSION
- virtual column cannot have domain type
- virtual columns are not supported in logical replication
The tests in generated_virtual.sql have been copied over from
generated_stored.sql with the keyword replaced. This way we can make
sure the behavior is mostly aligned, and the differences can be
visible. Some tests for currently not supported features are
currently commented out.
Reviewed-by: Jian He <jian.universality@gmail.com>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Tested-by: Shlok Kyal <shlok.kyal.oss@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/a368248e-69e4-40be-9c07-6c3b5880b0a6@eisentraut.org
The current boolean publish_generated_columns option only supports a
binary choice, which is insufficient for future enhancements where
generated columns can be of different types (e.g., stored or virtual). The
supported values for the publish_generated_columns option are 'none' and
'stored'.
Author: Vignesh C <vignesh21@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/d718d219-dd47-4a33-bb97-56e8fc4da994@eisentraut.org
Discussion: https://postgr.es/m/B80D17B2-2C8E-4C7D-87F2-E5B4BE3C069E@gmail.com
Ensure stored generated columns that are part of REPLICA IDENTITY must be
published explicitly for UPDATE and DELETE operations to be published. We
can publish generated columns by listing them in the column list or by
enabling the publish_generated_columns option.
This commit changes the behavior of the test added in commit adedf54e65 by
giving an ERROR for the UPDATE operation in such cases. There is no way to
trigger the bug reported in commit adedf54e65 but we didn't remove the
corresponding code change because it is still relevant when replicating
changes from a publisher with version less than 18.
We decided not to backpatch this behavior change to avoid the risk of
breaking existing output plugins that may be sending generated columns by
default although we are not aware of any such plugin. Also, we didn't see
any reports related to this on STABLE branches which is another reason not
to backpatch this change.
Author: Shlok Kyal, Hou Zhijie
Reviewed-by: Vignesh C, Amit Kapila
Discussion: https://postgr.es/m/CANhcyEVw4V2Awe2AB6i0E5AJLNdASShGfdBLbUd1XtWDboymCA@mail.gmail.com
Currently, logical replication produces a generic error message when
targeting a subscriber-side table column that is either missing or
generated. The error message can be misleading for generated columns.
This patch introduces a specific error message to clarify the issue when
generated columns are involved.
Author: Shubham Khanna
Reviewed-by: Peter Smith, Vignesh C, Amit Kapila
Discussion: https://postgr.es/m/CAHv8RjJBvYtqU7OAofBizOmQOK2Q8h+w9v2_cQWxT_gO7er3Aw@mail.gmail.com
This patch builds on the work done in commit 745217a051 by enabling the
replication of generated columns alongside regular column changes through
a new publication parameter: publish_generated_columns.
Example usage:
CREATE PUBLICATION pub1 FOR TABLE tab_gencol WITH (publish_generated_columns = true);
The column list takes precedence. If the generated columns are specified
in the column list, they will be replicated even if
'publish_generated_columns' is set to false. Conversely, if generated
columns are not included in the column list (assuming the user specifies a
column list), they will not be replicated even if
'publish_generated_columns' is true.
Author: Vignesh C, Shubham Khanna
Reviewed-by: Peter Smith, Amit Kapila, Hayato Kuroda, Shlok Kyal, Ajin Cherian, Hou Zhijie, Masahiko Sawada
Discussion: https://postgr.es/m/B80D17B2-2C8E-4C7D-87F2-E5B4BE3C069E@gmail.com
This commit allows logical replication to publish and replicate generated
columns when explicitly listed in the column list. We also ensured that
the generated columns were copied during the initial tablesync when they
were published.
We will allow to replicate generated columns even when they are not
specified in the column list (via a new publication option) in a separate
commit.
The motivation of this work is to allow replication for cases where the
client doesn't have generated columns. For example, the case where one is
trying to replicate data from Postgres to the non-Postgres database.
Author: Shubham Khanna, Vignesh C, Hou Zhijie
Reviewed-by: Peter Smith, Hayato Kuroda, Shlok Kyal, Amit Kapila
Discussion: https://postgr.es/m/B80D17B2-2C8E-4C7D-87F2-E5B4BE3C069E@gmail.com
Previously the default value of streaming option for a subscription was
'off'. The parallel option indicates that the changes in large
transactions (greater than logical_decoding_work_mem) are to be applied
directly via one of the parallel apply workers, if available.
The parallel mode was introduced in 16, but we refrain from enabling it by
default to avoid seeing any unpleasant behavior in the existing
applications. However we haven't found any such report yet, so this is a
good time to enable it by default.
Reported-by: Vignesh C
Author: Hayato Kuroda, Masahiko Sawada, Peter Smith, Amit Kapila
Discussion: https://postgr.es/m/CALDaNm1=MedhW23NuoePJTmonwsMSp80ddsw+sEJs0GUMC_kqQ@mail.gmail.com
This commit adds columns in view pg_stat_subscription_stats to show the
number of times a particular conflict type has occurred during the
application of logical replication changes. The following columns are
added:
confl_insert_exists:
Number of times a row insertion violated a NOT DEFERRABLE unique
constraint.
confl_update_origin_differs:
Number of times an update was performed on a row that was
previously modified by another origin.
confl_update_exists:
Number of times that the updated value of a row violates a
NOT DEFERRABLE unique constraint.
confl_update_missing:
Number of times that the tuple to be updated is missing.
confl_delete_origin_differs:
Number of times a delete was performed on a row that was
previously modified by another origin.
confl_delete_missing:
Number of times that the tuple to be deleted is missing.
The update_origin_differs and delete_origin_differs conflicts can be
detected only when track_commit_timestamp is enabled.
Author: Hou Zhijie
Reviewed-by: Shveta Malik, Peter Smith, Anit Kapila
Discussion: https://postgr.es/m/OS0PR01MB57160A07BD575773045FC214948F2@OS0PR01MB5716.jpnprd01.prod.outlook.com
The conflict types 'update_differ' and 'delete_differ' indicate that a row
to be modified was previously altered by another origin. Rename those to
'update_origin_differs' and 'delete_origin_differs' to clarify their
meaning.
Author: Hou Zhijie
Reviewed-by: Shveta Malik, Peter Smith
Discussion: https://postgr.es/m/CAA4eK1+HEKwG_UYt4Zvwh5o_HoCKCjEGesRjJX38xAH3OxuuYA@mail.gmail.com
We advance origin progress during abort on successful streaming and
application of ROLLBACK in parallel streaming mode. But the origin
shouldn't be advanced during an error or unsuccessful apply due to
shutdown. Otherwise, it will result in a transaction loss as such a
transaction won't be sent again by the server.
Reported-by: Hou Zhijie
Author: Hayato Kuroda and Shveta Malik
Reviewed-by: Amit Kapila
Backpatch-through: 16
Discussion: https://postgr.es/m/TYAPR01MB5692FAC23BE40C69DA8ED4AFF5B92@TYAPR01MB5692.jpnprd01.prod.outlook.com
This patch provides the additional logging information in the following
conflict scenarios while applying changes:
insert_exists: Inserting a row that violates a NOT DEFERRABLE unique constraint.
update_differ: Updating a row that was previously modified by another origin.
update_exists: The updated row value violates a NOT DEFERRABLE unique constraint.
update_missing: The tuple to be updated is missing.
delete_differ: Deleting a row that was previously modified by another origin.
delete_missing: The tuple to be deleted is missing.
For insert_exists and update_exists conflicts, the log can include the origin
and commit timestamp details of the conflicting key with track_commit_timestamp
enabled.
update_differ and delete_differ conflicts can only be detected when
track_commit_timestamp is enabled on the subscriber.
We do not offer additional logging for exclusion constraint violations because
these constraints can specify rules that are more complex than simple equality
checks. Resolving such conflicts won't be straightforward. This area can be
further enhanced if required.
Author: Hou Zhijie
Reviewed-by: Shveta Malik, Amit Kapila, Nisha Moond, Hayato Kuroda, Dilip Kumar
Discussion: https://postgr.es/m/OS0PR01MB5716352552DFADB8E9AD1D8994C92@OS0PR01MB5716.jpnprd01.prod.outlook.com
After disabling the subscription, the failed test was changing the
two_phase option for the subscription. We can't change the two_phase
option for a subscription till the corresponding apply worker is active.
The check to ensure that the replication apply worker has exited was
incorrect.
Author: Vignesh C
Discussion: https://postgr.es/m/CALDaNm3YY+bzj+JWJbY+DsUgJ2mPk8OR1ttjVX2cywKr4BUgxw@mail.gmail.com
The two_phase option is controlled by both the publisher (as a slot
option) and the subscriber (as a subscription option), so the slot option
must also be modified.
Changing the 'two_phase' option for a subscription from 'true' to 'false'
is permitted only when there are no pending prepared transactions
corresponding to that subscription. Otherwise, the changes of already
prepared transactions can be replicated again along with their corresponding
commit leading to duplicate data or errors.
To avoid data loss, the 'two_phase' option for a subscription can only be
changed from 'false' to 'true' once the initial data synchronization is
completed. Therefore this is performed later by the logical replication worker.
Author: Hayato Kuroda, Ajin Cherian, Amit Kapila
Reviewed-by: Peter Smith, Hou Zhijie, Amit Kapila, Vitaly Davydov, Vignesh C
Discussion: https://postgr.es/m/8fab8-65d74c80-1-2f28e880@39088166
This test was failing when using wal_debug=on and -DWAL_DEBUG because of
additional log entries that made the test grab an LSN not mapping with
the error expected in the test.
Previously the test would look for the first matching line to get the
LSN to skip up to. This is improved by having the test scan the logs
with a regexp that checks for the expected ERROR string, ensuring that
the wanted LSN comes from the correct context.
Backpatch down to 15 where this test has been introduced.
Author: Ian Ilyasov
Discussion: https://postgr.es/m/GV1P251MB100415F17E6B2FDD7188777ECDE32@GV1P251MB1004.EURP251.PROD.OUTLOOK.COM
Backpatch-through: 15
After further review, we want to move in the direction of always
quoting GUC names in error messages, rather than the previous (PG16)
wildly mixed practice or the intermittent (mid-PG17) idea of doing
this depending on how possibly confusing the GUC name is.
This commit applies appropriate quotes to (almost?) all mentions of
GUC names in error messages. It partially supersedes a243569bf6 and
8d9978a717, which had moved things a bit in the opposite direction
but which then were abandoned in a partial state.
Author: Peter Smith <smithpb2250@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CAHut%2BPv-kSN8SkxSdoHano_wPubqcg5789ejhCDZAcLFceBR-w%40mail.gmail.com
Run pgindent, pgperltidy, and reformat-dat-files.
The pgindent part of this is pretty small, consisting mainly of
fixing up self-inflicted formatting damage from patches that
hadn't bothered to add their new typedefs to typedefs.list.
In order to keep it from making anything worse, I manually added
a dozen or so typedefs that appeared in the existing typedefs.list
but not in the buildfarm's list. Perhaps we should formalize that,
or better find a way to get those typedefs into the automatic list.
pgperltidy is as opinionated as always, and reformat-dat-files too.
This fixes various typos, duplicated words, and tiny bits of whitespace
mainly in code comments but also in docs.
Author: Daniel Gustafsson <daniel@yesql.se>
Author: Heikki Linnakangas <hlinnaka@iki.fi>
Author: Alexander Lakhin <exclusion@gmail.com>
Author: David Rowley <dgrowleyml@gmail.com>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/3F577953-A29E-4722-98AD-2DA9EFF2CBB8@yesql.se
The reason was that the ALTER SUBSCRIPTION .. SET PUBLICATION will lead to
the restarting of apply worker and after the restart, the apply worker
will use the existing slot and replication origin corresponding to the
subscription. Now, it is possible that before restart the origin has not
been updated and the WAL start location points to a location before where
PUBLICATION exists which can lead to the error "publication ... does not
exist".
Fix it by recreating the subscription as a newly created subscription will
start processing WAL from the recent WAL location and will see the
required publication.
This behavior has existed from the time logical replication was introduced
but is exposed by this test and we have started a discussion for a better
fix for this problem.
As per Buildfarm
Diagnosed-by: Amit Kapila
Author: Vignesh C
Discussion: https://postgr.es/m/3307255.1706911634@sss.pgh.pa.us
A superuser may create a subscription with password_required=true, but
which uses a connection string without a password.
Previously, if the owner of such a subscription was changed to a
non-superuser, the non-superuser was able to utilize a password from
another source (like a password file or the PGPASSWORD environment
variable), which should not have been allowed.
This commit adds a step to re-validate the connection string before
connecting.
Reported-by: Jeff Davis
Author: Vignesh C
Reviewed-by: Peter Smith, Robert Haas, Amit Kapila
Discussion: https://www.postgresql.org/message-id/flat/e5892973ae2a80a1a3e0266806640dae3c428100.camel%40j-davis.com
Backpatch-through: 16
There are a lot of Perl scripts in the tree, mostly code generation
and TAP tests. Occasionally, these scripts produce warnings. These
are probably always mistakes on the developer side (true positives).
Typical examples are warnings from genbki.pl or related when you make
a mess in the catalog files during development, or warnings from tests
when they massage a config file that looks different on different
hosts, or mistakes during merges (e.g., duplicate subroutine
definitions), or just mistakes that weren't noticed because there is a
lot of output in a verbose build.
This changes all warnings into fatal errors, by replacing
use warnings;
by
use warnings FATAL => 'all';
in all Perl files.
Discussion: https://www.postgresql.org/message-id/flat/06f899fd-1826-05ab-42d6-adeb1fd5e200%40eisentraut.org
52e4f0cd4 introduced a bug in pgoutput in which missing values in tuples
were incorrectly filled in with NULL. The problem was the use of
CreateTupleDescCopy where CreateTupleDescCopyConstr was required, as the
former drops the constraints in the tuple description (specifically, the
default value constraint) on the floor.
The bug could result in incorrectness when a table replicated via
`REPLICA IDENTITY FULL` underwent a schema change that added a column
with a default value. The problem is that in such cases updates fill NULL
values in old tuples for missing columns for default values. Then on the
subscriber, we failed to find a matching tuple and missed updating the
required row.
Author: Nikhil Benesch
Reviewed-by: Hou Zhijie, Amit Kapila
Backpatch-through: 15
Discussion: http://postgr.es/m/CAPWqQZTEpZQamYsGMn6ZDRvVywwpVPiKH6OY4KSgA+NmeqFNzA@mail.gmail.com
The copy command formed for initial sync was using parenthesis for tables
with no columns leading to syntax error. This patch avoids adding
parenthesis for such tables.
Reported-by: Justin G
Author: Vignesh C
Reviewed-by: Peter Smith, Amit Kapila
Backpatch-through: 15
Discussion: http://postgr.es/m/18203-df37fe354b626670@postgresql.org
A PostgreSQL release tarball contains a number of prebuilt files, in
particular files produced by bison, flex, perl, and well as html and
man documentation. We have done this consistent with established
practice at the time to not require these tools for building from a
tarball. Some of these tools were hard to get, or get the right
version of, from time to time, and shipping the prebuilt output was a
convenience to users.
Now this has at least two problems:
One, we have to make the build system(s) work in two modes: Building
from a git checkout and building from a tarball. This is pretty
complicated, but it works so far for autoconf/make. It does not
currently work for meson; you can currently only build with meson from
a git checkout. Making meson builds work from a tarball seems very
difficult or impossible. One particular problem is that since meson
requires a separate build directory, we cannot make the build update
files like gram.h in the source tree. So if you were to build from a
tarball and update gram.y, you will have a gram.h in the source tree
and one in the build tree, but the way things work is that the
compiler will always use the one in the source tree. So you cannot,
for example, make any gram.y changes when building from a tarball.
This seems impossible to fix in a non-horrible way.
Second, there is increased interest nowadays in precisely tracking the
origin of software. We can reasonably track contributions into the
git tree, and users can reasonably track the path from a tarball to
packages and downloads and installs. But what happens between the git
tree and the tarball is obscure and in some cases non-reproducible.
The solution for both of these issues is to get rid of the step that
adds prebuilt files to the tarball. The tarball now only contains
what is in the git tree (*). Getting the additional build
dependencies is no longer a problem nowadays, and the complications to
keep these dual build modes working are significant. And of course we
want to get the meson build system working universally.
This commit removes the make distprep target altogether. The make
dist target continues to do its job, it just doesn't call distprep
anymore.
(*) - The tarball also contains the INSTALL file that is built at make
dist time, but not by distprep. This is unchanged for now.
The make maintainer-clean target, whose job it is to remove the
prebuilt files in addition to what make distclean does, is now just an
alias to make distprep. (In practice, it is probably obsolete given
that git clean is available.)
The following programs are now hard build requirements in configure
(they were already required by meson.build):
- bison
- flex
- perl
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/flat/e07408d9-e5f2-d9fd-5672-f53354e9305e@eisentraut.org
A couple of TAP tests make use of wal_level=logical for nodes that do
not need to do any kind of logical decoding operations, like
subscription nodes on which changes are only applied. This can be
confusing when reading these tests as setup examples, so let's remove
this configuration where not required (contrary to two-way logical
replication and similar more complex cases). This simplifies the tests
a bit, making them slightly cheaper with less WAL generated overall.
Author: Hayato Kuroda
Discussion: https://postgr.es/m/TYAPR01MB5866946BCEB747ABE513ACC6F5D5A@TYAPR01MB5866.jpnprd01.prod.outlook.com
Restart the apply worker if the subscription owner's superuser privileges
have been revoked. This is required so that the subscription connection
string gets revalidated and use the password option to connect to the
publisher for non-superusers, if required.
Author: Vignesh C
Reviewed-by: Amit Kapila
Discussion: http://postgr.es/m/CALDaNm2Dxmhq08nr4P6G+24QvdBo_GAVyZ_Q1TcGYK+8NHs9xw@mail.gmail.com
Thanks to commit 2a8b40e368, the logical replication worker type is
easily determined. The worker type could already be deduced via
other columns such as leader_pid and relid, but that is unnecessary
complexity for users.
Bumps catversion.
Author: Peter Smith
Reviewed-by: Michael Paquier, Maxim Orlov, Amit Kapila
Discussion: https://postgr.es/m/CAHut%2BPtmbSMfErSk0S7xxVdZJ9XVE3xVLhqBTmT91kf57BeKDQ%40mail.gmail.com
