Commit a97e85f2b caused "exceed the available area" warnings in PDF
builds. Fine-tune colwidth values to avoid that.
Back-patch to 9.6, like the prior patch. (This is of dubious value
before v13, since we were far from free of such warnings in older
branches. But we might as well keep the SGML looking the same in all
branches.)
Per buildfarm.
Previously, a conversion such as
to_date('-44-02-01','YYYY-MM-DD')
would result in '0045-02-01 BC', as the code attempted to interpret
the negative year as BC, but failed to apply the correction needed
for our internal handling of BC years. Fix the off-by-one problem.
Also, arrange for the combination of a negative year and an
explicit "BC" marker to cancel out and produce AD. This is how
the negative-century case works, so it seems sane to do likewise.
Continue to read "year 0000" as 1 BC. Oracle would throw an error,
but we've accepted that case for a long time so I'm hesitant to
change it in a back-patch.
Per bug #16419 from Saeed Hubaishan. Back-patch to all supported
branches.
Dar Alathar-Yemen and Tom Lane
Discussion: https://postgr.es/m/16419-d8d9db0a7553f01b@postgresql.org
Previously the standby server didn't archive timeline history files
streamed from the primary even when archive_mode is set to "always",
while it archives the streamed WAL files. This could cause the PITR to
fail because there was no required timeline history file in the archive.
The cause of this issue was that walreceiver didn't mark those files as
ready for archiving.
This commit makes walreceiver mark those streamed timeline history
files as ready for archiving if archive_mode=always. Then the archiver
process archives the marked timeline history files.
Back-patch to all supported versions.
Reported-by: Grigory Smolkin
Author: Grigory Smolkin, Fujii Masao
Reviewed-by: David Zhang, Anastasia Lubennikova
Discussion: https://postgr.es/m/54b059d4-2b48-13a4-6f43-95a087c92367@postgrespro.ru
We have had multiple reports that point to the
'@colReorder=latn-digit' collation customization being buggy. We have
reported this to ICU and are waiting for a fix. In the meantime,
remove references to this from the documentation and replace it by
another reordering example. Apparently, many users have been picking
up this example specifically from the documentation.
Author: Jehan-Guillaume de Rorthais <jgdr@dalibo.com>
Discussion: https://www.postgresql.org/message-id/flat/153201618542.1404.3611626898935613264%40wrigleys.postgresql.org
Back-patch key parts of 4c5cf5431 and 6ca547cf7 into stable branches.
I didn't touch pg_description entries here, so it's purely a docs
change; and I didn't fool with any examples either. The main point
is so that anyone who's wondering if factorial() exists in the stable
branches will be reassured.
Mark Dilger and John Naylor, with some adjustments by me
Discussion: https://postgr.es/m/BE2DF53D-251A-4E26-972F-930E523580E9@enterprisedb.com
The SimpleLruTruncate() header comment states the new coding rule. To
achieve this, add locktype "frozenid" and two LWLocks. This closes a
rare opportunity for data loss, which manifested as "apparent
wraparound" or "could not access status of transaction" errors. Data
loss is more likely in pg_multixact, due to released branches' thin
margin between multiStopLimit and multiWrapLimit. If a user's physical
replication primary logged ": apparent wraparound" messages, the user
should rebuild standbys of that primary regardless of symptoms. At less
risk is a cluster having emitted "not accepting commands" errors or
"must be vacuumed" warnings at some point. One can test a cluster for
this data loss by running VACUUM FREEZE in every database. Back-patch
to 9.5 (all supported versions).
Discussion: https://postgr.es/m/20190218073103.GA1434723@rfd.leadboat.com
Up to now, upon receipt of a SIGTERM ("smart shutdown" command), the
postmaster has immediately killed all "optional" background processes,
and subsequently refused to launch new ones while it's waiting for
foreground client processes to exit. No doubt this seemed like an OK
policy at some point; but it's a pretty bad one now, because it makes
for a seriously degraded environment for the remaining clients:
* Parallel queries are killed, and new ones fail to launch. (And our
parallel-query infrastructure utterly fails to deal with the case
in a reasonable way --- it just hangs waiting for workers that are
not going to arrive. There is more work needed in that area IMO.)
* Autovacuum ceases to function. We can tolerate that for awhile,
but if bulk-update queries continue to run in the surviving client
sessions, there's eventually going to be a mess. In the worst case
the system could reach a forced shutdown to prevent XID wraparound.
* The bgwriter and walwriter are also stopped immediately, likely
resulting in performance degradation.
Hence, let's rearrange things so that the only immediate change in
behavior is refusing to let in new normal connections. Once the last
normal connection is gone, shut everything down as though we'd received
a "fast" shutdown. To implement this, remove the PM_WAIT_BACKUP and
PM_WAIT_READONLY states, instead staying in PM_RUN or PM_HOT_STANDBY
while normal connections remain. A subsidiary state variable tracks
whether or not we're letting in new connections in those states.
This also allows having just one copy of the logic for killing child
processes in smart and fast shutdown modes. I moved that logic into
PostmasterStateMachine() by inventing a new state PM_STOP_BACKENDS.
Back-patch to 9.6 where parallel query was added. In principle
this'd be a good idea in 9.5 as well, but the risk/reward ratio
is not as good there, since lack of autovacuum is not a problem
during typical uses of smart shutdown.
Per report from Bharath Rupireddy.
Patch by me, reviewed by Thomas Munro
Discussion: https://postgr.es/m/CALj2ACXAZ5vKxT9P7P89D87i3MDO9bfS+_bjMHgnWJs8uwUOOw@mail.gmail.com
Hostile objects located within the installation-time search_path could
capture references in an extension's installation or upgrade script.
If the extension is being installed with superuser privileges, this
opens the door to privilege escalation. While such hazards have existed
all along, their urgency increases with the v13 "trusted extensions"
feature, because that lets a non-superuser control the installation path
for a superuser-privileged script. Therefore, make a number of changes
to make such situations more secure:
* Tweak the construction of the installation-time search_path to ensure
that references to objects in pg_catalog can't be subverted; and
explicitly add pg_temp to the end of the path to prevent attacks using
temporary objects.
* Disable check_function_bodies within installation/upgrade scripts,
so that any security gaps in SQL-language or PL-language function bodies
cannot create a risk of unwanted installation-time code execution.
* Adjust lookup of type input/receive functions and join estimator
functions to complain if there are multiple candidate functions. This
prevents capture of references to functions whose signature is not the
first one checked; and it's arguably more user-friendly anyway.
* Modify various contrib upgrade scripts to ensure that catalog
modification queries are executed with secure search paths. (These
are in-place modifications with no extension version changes, since
it is the update process itself that is at issue, not the end result.)
Extensions that depend on other extensions cannot be made fully secure
by these methods alone; therefore, revert the "trusted" marking that
commit eb67623c9 applied to earthdistance and hstore_plperl, pending
some better solution to that set of issues.
Also add documentation around these issues, to help extension authors
write secure installation scripts.
Patch by me, following an observation by Andres Freund; thanks
to Noah Misch for review.
Security: CVE-2020-14350
In "High Availability, Load Balancing, and Replication" chapter,
certain descriptions of Pgpool-II were not correct at this point. It
does not need conflict resolution. Also "Multiple-Server Parallel
Query Execution" is not supported anymore.
Discussion: https://postgr.es/m/20200726.230128.53842489850344110.t-ishii%40sraoss.co.jp
Author: Tatsuo Ishii
Reviewed-by: Bruce Momjian
Backpatch-through: 9.5
TLS 1.3 uses a different way of specifying ciphers and a different
OpenSSL API. PostgreSQL currently does not support setting those
ciphers. For now, just document this. In the future, support for
this might be added somehow.
Reviewed-by: Jonathan S. Katz <jkatz@postgresql.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
This coding technique is unsafe, since we'd be accessing off the end
of the tuple if the field is null. SIGSEGV is pretty improbable, but
perhaps not impossible. Also, returning garbage for the LSN doesn't
seem like a great idea, even if callers aren't looking at it today.
Also update docs to point out explicitly that
pg_subscription.subslotname and pg_subscription_rel.srsublsn
can be null.
Perhaps we should mark these two fields BKI_FORCE_NULL, so that
they'd be correctly labeled in databases that are initdb'd in the
future. But we can't force that for existing databases, and on
balance it's not too clear that having a mix of different catalog
contents in the field would be wise.
Apply to v10 (where this code came in) through v12. Already
fixed in v13 and HEAD.
Discussion: https://postgr.es/m/732838.1595278439@sss.pgh.pa.us
Re-point comp.ai.genetic FAQ link to a more stable address.
Remove stale links to AIX documentation; we don't really need to
tell AIX users how to use their systems.
Remove stale links to HP documentation about SSL. We've had to
update those twice before, making it increasingly obvious that
HP does not intend them to be stable landing points. They're
not particularly authoritative, either. (This change effectively
reverts bbd3bdba3.)
Daniel Gustafsson and Álvaro Herrera, per a gripe from
Kyotaro Horiguchi. Back-patch, since these links are
just as dead in the back branches.
Discussion: https://postgr.es/m/20200709.161226.204639179120026914.horikyota.ntt@gmail.com
pg_stat_activity.query text is truncated at 1024 bytes. But previously
the document described that it's truncated at 1024 characters.
This was not accurate when considering multibyte characters.
Back-patch to v10 where this inaccurate description was added.
Author: Atsushi Torikoshi
Reviewed-by: Daniel Gustafsson, Fujii Masao
Discussion: https://postgr.es/m/cd5b49a5a14e887542f5f569c1c6bde2@oss.nttdata.com
After running GetForeignRelSize for a foreign table, adjust rel->tuples
to be at least as large as rel->rows. This prevents bizarre behavior
in estimate_num_groups() and perhaps other places, especially in the
scenario where rel->tuples is zero because pg_class.reltuples is
(suggesting that ANALYZE has never been run for the table). As things
stood, we'd end up estimating one group out of any GROUP BY on such a
table, whereas the default group-count estimate is more likely to result
in a sane plan.
Also, clarify in the documentation that GetForeignRelSize has the option
to override the rel->tuples value if it has a better idea of what to use
than what is in pg_class.reltuples.
Per report from Jeff Janes. Back-patch to all supported branches.
Patch by me; thanks to Etsuro Fujita for review
Discussion: https://postgr.es/m/CAMkU=1xNo9cnan+Npxgz0eK7394xmjmKg-QEm8wYG9P5-CcaqQ@mail.gmail.com
Warnings start 10M transactions before xidStopLimit, which is 11M
transactions before wraparound. The sample WARNING output showed a
value greater than 11M, and its HINT message predated commit
25ec228ef7. Hence, the sample was
impossible. Back-patch to 9.5 (all supported versions).
The IANA time zone folk have deprecated use of a "posixrules" file in
the tz database. While for now it's our choice whether to keep
supplying one in our own builds, installations built with
--with-system-tzdata will soon be needing to cope with that file not
being present, at least on some platforms.
This causes a problem for the horology test, which expected the
nonstandard POSIX zone spec "CST7CDT" to apply pre-2007 US daylight
savings rules. That does happen if the posixrules file supplies such
information, but otherwise the test produces undesired results.
To fix, add an explicit transition date rule that matches 2005 practice.
(We could alternatively have switched the test to use some real time
zone, but it seems useful to have coverage of this type of zone spec.)
While at it, update a documentation example that also relied on
"CST7CDT"; use a real-world zone name instead. Also, document why
the zone names EST5EDT, CST6CDT, MST7MDT, PST8PDT aren't subject to
similar failures when "posixrules" is missing.
Back-patch to all supported branches, since the hazard is the same
for all.
Discussion: https://postgr.es/m/1665379.1592581287@sss.pgh.pa.us
We'd glossed over most of this complexity for years, but it's hard
to avoid writing it all down now, so that we can explain what happens
when there's no "posixrules" file in the IANA time zone database.
That was at best a tiny minority situation till now, but it's likely
to become quite common in the future, so we'd better explain it.
Nonetheless, we don't really encourage people to use POSIX zone specs;
picking a named zone is almost always what you really want, unless
perhaps you're stuck with an out-of-date zone database. Therefore,
let's shove all this detail into an appendix.
Patch by me; thanks to Robert Haas for help with some awkward wording.
Discussion: https://postgr.es/m/1390.1562258309@sss.pgh.pa.us
Our documentation failed to point out that REPEATABLE READ is really
snapshot isolation, which might be important to some users. Point to
the standard reference paper for this complicated topic.
Likewise, add a reference to the VLDB paper about PostgreSQL SSI, for
technical information about our SSI implementation and how it compares
to S2PL.
While here, add a note about catalog access using a lower isolation
level, per recent user complaint.
Back-patch to all releases.
Reported-by: Kyle Kingsbury <aphyr@jepsen.io>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Peter Geoghegan <pg@bowt.ie>
Reviewed-by: Tatsuo Ishii <ishii@sraoss.co.jp>
Discussion: https://postgr.es/m/db7b729d-0226-d162-a126-8a8ab2dc4443%40jepsen.io
Discussion: https://postgr.es/m/16454-9408996bb1750faf%40postgresql.org
In PostgreSQL 10, we stopped using System V semaphores on Linux
systems. Update the example we give of an error message from a
misconfigured system to show what people are most likely to see these
days.
Back-patch to 10, where PREFERRED_SEMAPHORES=UNNAMED_POSIX arrived.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CA%2BhUKGLmJUSwybaPQv39rB8ABpqJq84im2UjZvyUY4feYhpWMw%40mail.gmail.com
The description missed a comma and lacked an explanation of what happens
with REPLICA IDENTITY USING INDEX when the dependent index is dropped.
Author: Marina Polyakova
Reviewed-by: Daniel Gustafsson, Michael Paquier
Discussion: https://postgr.es/m/ad1a0badc32658b1bbb07aa312346a1d@postgrespro.ru
Backpatch-through: 9.5
The docs explained that a SHARE ROW EXCLUSIVE lock is needed on the
referenced table, but failed to say the same about the table being
altered. Since the page says that ACCESS EXCLUSIVE lock is taken
unless otherwise stated, this left readers with the wrong conclusion.
Discussion: https://postgr.es/m/834603375.3470346.1586482852542@mail.yahoo.com
CREATE GROUP is an exact alias for CREATE ROLE, and CREATE USER is
almost an exact alias, as can easily be confirmed by checking the
code. So the man page syntax descriptions ought to match up. The
last few additions of role options seem to have forgotten to update
create_group.sgml, though. Fix that, and add a naggy reminder to
create_role.sgml in hopes of not forgetting again.
Discussion: https://postgr.es/m/158647836143.655.9853963229391401576@wrigleys.postgresql.org
The documentation says that the max length is 255 bytes, but
code inspection says it's actually 255 characters; and relevant
lengths are stored as uint16 so that that works.
These uint16 fields could be overflowed by excessively long input,
producing strange results. Complain for invalid input.
Likewise check for out-of-range values of the repeat counts in lquery.
(We don't try too hard on that one, notably not bothering to detect
if atoi's result has overflowed.)
Also detect length overflow in ltree_concat.
In passing, be more consistent about whether "syntax error" messages
include the type name. Also, clarify the documentation about what
the size limit is.
This has been broken for a long time, so back-patch to all supported
branches.
Nikita Glukhov, reviewed by Benjie Gillam and Tomas Vondra
Discussion: https://postgr.es/m/CAP_rww=waX2Oo6q+MbMSiZ9ktdj6eaJj0cQzNu=Ry2cCDij5fw@mail.gmail.com
src/port/getopt_long.c failed on such an argument, always seeing it
as an unrecognized switch. This is unhelpful; better is to treat such
an item as a non-switch argument. That behavior is what we find in
GNU's getopt_long(); it's what src/port/getopt.c does; and it is
required by POSIX for getopt(), which getopt_long() ought to be
generally a superset of. Moreover, it's expected by ecpg, which
intends an argument of "-" to mean "read from stdin". So fix it.
Also add some documentation about ecpg's behavior in this area, since
that was miserably underdocumented. I had to reverse-engineer it
from the code.
Per bug #16304 from James Gray. Back-patch to all supported branches,
since this has been broken forever.
Discussion: https://postgr.es/m/16304-c662b00a1322db7f@postgresql.org
Until now, only selected bulk operations (e.g. COPY) did this. If a
given relfilenode received both a WAL-skipping COPY and a WAL-logged
operation (e.g. INSERT), recovery could lose tuples from the COPY. See
src/backend/access/transam/README section "Skipping WAL for New
RelFileNode" for the new coding rules. Maintainers of table access
methods should examine that section.
To maintain data durability, just before commit, we choose between an
fsync of the relfilenode and copying its contents to WAL. A new GUC,
wal_skip_threshold, guides that choice. If this change slows a workload
that creates small, permanent relfilenodes under wal_level=minimal, try
adjusting wal_skip_threshold. Users setting a timeout on COMMIT may
need to adjust that timeout, and log_min_duration_statement analysis
will reflect time consumption moving to COMMIT from commands like COPY.
Internally, this requires a reliable determination of whether
RollbackAndReleaseCurrentSubTransaction() would unlink a relation's
current relfilenode. Introduce rd_firstRelfilenodeSubid. Amend the
specification of rd_createSubid such that the field is zero when a new
rel has an old rd_node. Make relcache.c retain entries for certain
dropped relations until end of transaction.
Back-patch to 9.5 (all supported versions). This introduces a new WAL
record type, XLOG_GIST_ASSIGN_LSN, without bumping XLOG_PAGE_MAGIC. As
always, update standby systems before master systems. This changes
sizeof(RelationData) and sizeof(IndexStmt), breaking binary
compatibility for affected extensions. (The most recent commit to
affect the same class of extensions was
089e4d405d0f3b94c74a2c6a54357a84a681754b.)
Kyotaro Horiguchi, reviewed (in earlier, similar versions) by Robert
Haas. Heikki Linnakangas and Michael Paquier implemented earlier
designs that materially clarified the problem. Reviewed, in earlier
designs, by Andrew Dunstan, Andres Freund, Alvaro Herrera, Tom Lane,
Fujii Masao, and Simon Riggs. Reported by Martijn van Oosterhout.
Discussion: https://postgr.es/m/20150702220524.GA9392@svana.org
This commit corrects the descriptions of RecoveryWalAll and RecoveryWalStream
wait events in the documentation.
Back-patch to v10 where those wait events were added.
Author: Fujii Masao
Reviewed-by: Kyotaro Horiguchi, Atsushi Torikoshi
Discussion: https://postgr.es/m/124997ee-096a-5d09-d8da-2c7a57d0816e@oss.nttdata.com
I noticed that we completely failed to document the restriction
that an "anyrange" result type has to be inferred from an "anyrange"
input. The docs also were less clear than they could be about the
relationship between "anyrange" and "anyarray".
It's been like this all along, so back-patch.
If pkg-config is installed and knows about libxml2, use its information
rather than asking xml2-config. Otherwise proceed as before. This
patch allows "configure --with-libxml" to succeed on platforms that
have pkg-config but not xml2-config, which is likely to soon become
a typical situation.
The old mechanism can be forced by setting XML2_CONFIG explicitly
(hence, build processes that were already doing so will certainly
not need adjustment). Also, it's now possible to set XML2_CFLAGS
and XML2_LIBS explicitly to override both programs.
There is a small risk of this breaking existing build processes,
if there are multiple libxml2 installations on the machine and
pkg-config disagrees with xml2-config about which to use. The
only case where that seems really likely is if a builder has tried
to select a non-default xml2-config by putting it early in his PATH
rather than setting XML2_CONFIG. Plan to warn against that in the
minor release notes.
Back-patch to v10; before that we had no pkg-config infrastructure,
and it doesn't seem worth adding it for this.
Hugh McMaster and Tom Lane; Peter Eisentraut also made an earlier
attempt at this, from which I lifted most of the docs changes.
Discussion: https://postgr.es/m/CAN9BcdvfUwc9Yx5015bLH2TOiQ-M+t_NADBSPhMF7dZ=pLa_iw@mail.gmail.com
This extends the fixes made in commit 085b6b667 to other SRFs with the
same bug, namely pg_logdir_ls(), pgrowlocks(), pg_timezone_names(),
pg_ls_dir(), and pg_tablespace_databases().
Also adjust various comments and documentation to warn against
expecting to clean up resources during a ValuePerCall SRF's final
call.
Back-patch to all supported branches, since these functions were
all born broken.
Justin Pryzby, with cosmetic tweaks by me
Discussion: https://postgr.es/m/20200308173103.GC1357@telsasoft.com
This should of course be just "PG_ARGISNULL()".
Also reorder a couple of paras to make the discussion of PG_ARGISNULL
less disjointed.
Back-patch to v10 where the error was introduced.
Laurenz Albe and Tom Lane, per an anonymous docs comment
Discussion: https://postgr.es/m/158399487096.5708.10696365251766477013@wrigleys.postgresql.org
Previously the documentation explains that WAL segment files
start at 000000010000000000000000. But the first WAL segment file
that initdb creates is 000000010000000000000001 not
000000010000000000000000. This change was caused by old
commit 8c843fff2d, but the documentation had not been updated
a long time.
Back-patch to all supported branches.
Author: Fujii Masao
Reviewed-by: David Zhang
Discussion: https://postgr.es/m/CAHGQGwHOmGe2OqGOmp8cOfNVDivq7dbV74L5nUGr+3eVd2CU2Q@mail.gmail.com
Access to this module is granted to the pg_monitor role, not
pg_read_all_stats. (Given the view's performance impact,
it seems wise to be restrictive, so I think this was the
correct decision --- and anyway it was clearly intentional.)
Per bug #16279 from Philip Semanchuk.
Discussion: https://postgr.es/m/16279-fcaac33c68aab0ab@postgresql.org
Creating a bunch of non-overlapping partial indexes is generally
a bad idea, so add an example saying not to do that.
Back-patch to v10. Before that, the alternative of using (real)
partitioning wasn't available, so that the tradeoff isn't quite
so clear cut.
Discussion: https://postgr.es/m/CAKVFrvFY-f7kgwMRMiPLbPYMmgjc8Y2jjUGK_Y0HVcYAmU6ymg@mail.gmail.com
The GRANTED BY clause in GRANT/REVOKE ROLE has been there since 2005
but was never documented. I'm not sure now whether that was just an
oversight or was intentional (given the limited capability of the
option). But seeing that pg_dumpall does emit code that uses this
option, it seems like not documenting it at all is a bad idea.
Also, when we upgraded the syntax to allow CURRENT_USER/SESSION_USER
as the privilege recipient, the role form of GRANT was incorrectly
not modified to show that, and REVOKE's docs weren't touched at all.
Although I'm not that excited about GRANTED BY, the other oversight
seems serious enough to justify a back-patch.
Discussion: https://postgr.es/m/3070.1581526786@sss.pgh.pa.us
