The logical replication parallel apply worker could incorrectly advance
the origin progress during an error or failed apply. This behavior risks
transaction loss because such transactions will not be resent by the
server.
Commit 3f28b2fcac addressed a similar issue for both the apply worker and
the table sync worker by registering a before_shmem_exit callback to reset
origin information. This prevents the worker from advancing the origin
during transaction abortion on shutdown. This patch applies the same fix
to the parallel apply worker, ensuring consistent behavior across all
worker types.
As with 3f28b2fcac, we are backpatching through version 16, since parallel
apply mode was introduced there and the issue only occurs when changes are
applied before the transaction end record (COMMIT or ABORT) is received.
Author: Hou Zhijie <houzj.fnst@fujitsu.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Backpatch-through: 16
Discussion: https://postgr.es/m/TY4PR01MB169078771FB31B395AB496A6B94B4A@TY4PR01MB16907.jpnprd01.prod.outlook.com
Discussion: https://postgr.es/m/TYAPR01MB5692FAC23BE40C69DA8ED4AFF5B92@TYAPR01MB5692.jpnprd01.prod.outlook.com
Since ce0fdbfe97, a replication slot and an origin are created by each
tablesync worker, whose information is stored in both a catalog and
shared memory (once the origin is set up in the latter case). The
transaction where the origin is created is the same as the one that runs
the initial COPY, with the catalog state of the origin becoming visible
for other sessions only once the COPY transaction has committed. The
catalog state is coupled with a state in shared memory, initialized at
the same time as the origin created in the catalogs. Note that the
transaction doing the initial data sync can take a long time, time that
depends on the amount of data to transfer from a publication node to its
subscriber node.
Now, when a DROP SUBSCRIPTION is executed, all its workers are stopped
with the origins removed. The removal of each origin relies on a
catalog lookup. A worker still running the initial COPY would fail its
transaction, with the catalog state of the origin rolled back while the
shared memory state remains around. The session running the DROP
SUBSCRIPTION should be in charge of cleaning up the catalog and the
shared memory state, but as there is no data in the catalogs the shared
memory state is not removed. This issue would leave orphaned origin
data in shared memory, leading to a confusing state as it would still
show up in pg_replication_origin_status. Note that this shared memory
data is sticky, being flushed on disk in replorigin_checkpoint at
checkpoint. This prevents other origins from reusing a slot position
in the shared memory data.
To address this problem, the commit moves the creation of the origin at
the end of the transaction that precedes the one executing the initial
COPY, making the origin immediately visible in the catalogs for other
sessions, giving DROP SUBSCRIPTION a way to know about it. A different
solution would have been to clean up the shared memory state using an
abort callback within the tablesync worker. The solution of this commit
is more consistent with the apply worker that creates an origin in a
short transaction.
A test is added in the subscription test 004_sync.pl, which was able to
display the problem. The test fails when this commit is reverted.
Reported-by: Tenglong Gu <brucegu@amazon.com>
Reported-by: Daisuke Higuchi <higudai@amazon.com>
Analyzed-by: Michael Paquier <michael@paquier.xyz>
Author: Hou Zhijie <houzj.fnst@fujitsu.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/aUTekQTg4OYnw-Co@paquier.xyz
Backpatch-through: 14
An unused variable caused a compiler warning on BF animal fairywren, an
snprintf() call was redundant, and some buffer sizes were inconsistent.
Per code review from Tom Lane.
The Makefile's test ifeq ($(PORTNAME), win32) never succeeded due to a
circularity, so only Meson builds were actually compiling the new test
code, partially explaining why CI didn't tell us about the warning
sooner (the other problem being that CompilerWarnings only makes
world-bin, a problem for another commit). Simplify.
Backpatch-through: 16, like commit c507ba55
Author: Bryan Green <dbryan.green@gmail.com>
Co-authored-by: Thomas Munro <tmunro@gmail.com>
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/1086088.1765593851%40sss.pgh.pa.us
The inplace update survives ROLLBACK. The inval didn't, so another
backend's DDL could then update the row without incorporating the
inplace update. In the test this fixes, a mix of CREATE INDEX and ALTER
TABLE resulted in a table with an index, yet relhasindex=f. That is a
source of index corruption.
Back-patch to v14 - v17. This is a back-patch of commits:
- 243e9b40f1
(main change, on master, before v18 branched)
- 0bada39c83
(defect fix, on master, before v18 branched)
- bae8ca82fd
(cosmetics from post-commit review, on REL_18_STABLE)
It reverses commit c1099dd745, my revert
of the original back-patch of 243e9b4.
This back-patch omits the non-comment heap_decode() changes. I find
those changes removed harmless code that was last necessary in v13. See
discussion thread for details. The back branches aren't the place to
remove such code.
Like the original back-patch, this doesn't change WAL, because these
branches use end-of-recovery SIResetAll(). All branches change the ABI
of extern function PrepareToInvalidateCacheTuple(). No PGXN extension
calls that, and there's no apparent use case in extensions. Expect
".abi-compliance-history" edits to follow.
Reviewed-by: Paul A Jungwirth <pj@illuminatedcomputing.com>
Reviewed-by: Surya Poondla <s_poondla@apple.com>
Reviewed-by: Ilyasov Ian <ianilyasov@outlook.com>
Reviewed-by: Nitin Motiani <nitinmotiani@google.com> (in earlier versions)
Reviewed-by: Andres Freund <andres@anarazel.de> (in earlier versions)
Discussion: https://postgr.es/m/20240523000548.58.nmisch@google.com
Backpatch-through: 14-17
PostgreSQL's src/port/open.c has always set bInheritHandle = TRUE
when opening files on Windows, making all file descriptors inheritable
by child processes. This meant the O_CLOEXEC flag, added to many call
sites by commit 1da569ca1f (v16), was silently ignored.
The original commit included a comment suggesting that our open()
replacement doesn't create inheritable handles, but it was a mis-
understanding of the code path. In practice, the code was creating
inheritable handles in all cases.
This hasn't caused widespread problems because most child processes
(archive_command, COPY PROGRAM, etc.) operate on file paths passed as
arguments rather than inherited file descriptors. Even if a child
wanted to use an inherited handle, it would need to learn the numeric
handle value, which isn't passed through our IPC mechanisms.
Nonetheless, the current behavior is wrong. It violates documented
O_CLOEXEC semantics, contradicts our own code comments, and makes
PostgreSQL behave differently on Windows than on Unix. It also creates
potential issues with future code or security auditing tools.
To fix, define O_CLOEXEC to _O_NOINHERIT in master, previously used by
O_DSYNC. We use different values in the back branches to preserve
existing values. In pgwin32_open_handle() we set bInheritHandle
according to whether O_CLOEXEC is specified, for the same atomic
semantics as POSIX in multi-threaded programs that create processes.
Backpatch-through: 16
Author: Bryan Green <dbryan.green@gmail.com>
Co-authored-by: Thomas Munro <thomas.munro@gmail.com> (minor adjustments)
Discussion: https://postgr.es/m/e2b16375-7430-4053-bda3-5d2194ff1880%40gmail.com
This commit adds the version information of a node initialized by
Cluster.pm, that may vary depending on the install_path given by the
test. The code was written so as the node information, that includes
the version number, was dumped before the version number was set.
This is particularly useful for the pg_upgrade TAP tests, that may mix
several versions for cross-version runs. The TAP infrastructure also
allows mixing nodes with different versions, so this information can be
useful for out-of-core tests.
Backpatch down to v15, where Cluster.pm and the pg_upgrade TAP tests
have been introduced.
Author: Potapov Alexander <a.potapov@postgrespro.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/e59bb-692c0a80-5-6f987180@170377126
Backpatch-through: 15
Formerly, when updating an auto-updatable view, or a relation with
rules, if the original query had any data-modifying CTEs, the rewriter
would rewrite those CTEs multiple times as RewriteQuery() recursed
into the product queries. In most cases that was harmless, because
RewriteQuery() is mostly idempotent. However, if the CTE involved
updating an always-generated column, it would trigger an error because
any subsequent rewrite would appear to be attempting to assign a
non-default value to the always-generated column.
This could perhaps be fixed by attempting to make RewriteQuery() fully
idempotent, but that looks quite tricky to achieve, and would probably
be quite fragile, given that more generated-column-type features might
be added in the future.
Instead, fix by arranging for RewriteQuery() to rewrite each CTE
exactly once (by tracking the number of CTEs already rewritten as it
recurses). This has the advantage of being simpler and more efficient,
but it does make RewriteQuery() dependent on the order in which
rewriteRuleAction() joins the CTE lists from the original query and
the rule action, so care must be taken if that is ever changed.
Reported-by: Bernice Southey <bernice.southey@gmail.com>
Author: Bernice Southey <bernice.southey@gmail.com>
Author: Dean Rasheed <dean.a.rasheed@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Kirill Reshke <reshkekirill@gmail.com>
Discussion: https://postgr.es/m/CAEDh4nyD6MSH9bROhsOsuTqGAv_QceU_GDvN9WcHLtZTCYM1kA@mail.gmail.com
Backpatch-through: 14
Normally, if a WHERE clause is implied by the predicate of a partial
index, we drop that clause from the set of quals used with the index,
since it's redundant to test it if we're scanning that index.
However, if it's a hash index (or any !amoptionalkey index), this
could result in dropping all available quals for the index's first
key, preventing us from generating an indexscan.
It's fair to question the practical usefulness of this case. Since
hash only supports equality quals, the situation could only arise
if the index's predicate is "WHERE indexkey = constant", implying
that the index contains only one hash value, which would make hash
a really poor choice of index type. However, perhaps there are
other !amoptionalkey index AMs out there with which such cases are
more plausible.
To fix, just don't filter the candidate indexquals this way if
the index is !amoptionalkey. That's a bit hokey because it may
result in testing quals we didn't need to test, but to do it
more accurately we'd have to redundantly identify which candidate
quals are actually usable with the index, something we don't know
at this early stage of planning. Doesn't seem worth the effort.
Reported-by: Sergei Glukhov <s.glukhov@postgrespro.ru>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/e200bf38-6b45-446a-83fd-48617211feff@postgrespro.ru
Backpatch-through: 14
The fix for bug #19055 (commit b0cc0a71e) allowed CTE references in
sub-selects within aggregate functions to affect the semantic levels
assigned to such aggregates. It turns out this broke some related
cases, leading to assertion failures or strange planner errors such
as "unexpected outer reference in CTE query". After experimenting
with some alternative rules for assigning the semantic level in
such cases, we've come to the conclusion that changing the level
is more likely to break things than be helpful.
Therefore, this patch undoes what b0cc0a71e changed, and instead
installs logic to throw an error if there is any reference to a
CTE that's below the semantic level that standard SQL rules would
assign to the aggregate based on its contained Var and Aggref nodes.
(The SQL standard disallows sub-selects within aggregate functions,
so it can't reach the troublesome case and hence has no rule for
what to do.)
Perhaps someone will come along with a legitimate query that this
logic rejects, and if so probably the example will help us craft
a level-adjustment rule that works better than what b0cc0a71e did.
I'm not holding my breath for that though, because the previous
logic had been there for a very long time before bug #19055 without
complaints, and that bug report sure looks to have originated from
fuzzing not from real usage.
Like b0cc0a71e, back-patch to all supported branches, though
sadly that no longer includes v13.
Bug: #19106
Reported-by: Kamil Monicz <kamil@monicz.dev>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/19106-9dd3668a0734cd72@postgresql.org
Backpatch-through: 14
This omission allowed table owners to create statistics in any
schema, potentially leading to unexpected naming conflicts. For
ALTER TABLE commands that require re-creating statistics objects,
skip this check in case the user has since lost CREATE on the
schema. The addition of a second parameter to CreateStatistics()
breaks ABI compatibility, but we are unaware of any impacted
third-party code.
Reported-by: Jelte Fennema-Nio <postgres@jeltef.nl>
Author: Jelte Fennema-Nio <postgres@jeltef.nl>
Co-authored-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Security: CVE-2025-12817
Backpatch-through: 13
The test introduced by 17b2d5ec75 verifies that a WAL receiver
survives across a timeline jump by searching the server logs for
termination messages. However, it called restart() before the timeline
switch, which kills the WAL receiver and may log the exact message being
checked, hence failing the test. As TAP tests reuse the same log file
across restarts, a rotate_logfile() is used before the restart so as the
log matching check is not impacted by log entries generated by a
previous shutdown.
Recent changes to file handle inheritance altered I/O timing enough to
make this fail consistently while testing another patch.
While on it, this adds an extra check based on a PID comparison. This
test may lead to false positives as it could be possible that the WAL
receiver has processed a timeline jump before the initial PID is
grabbed, but it should be good enough in most cases.
Like 17b2d5ec75, backpatch down to v13.
Author: Bryan Green <dbryan.green@gmail.com>
Co-authored-by: Xuneng Zhou <xunengzhou@gmail.com>
Discussion: https://postgr.es/m/9d00b597-d64a-4f1e-802e-90f9dc394c70@gmail.com
Backpatch-through: 13
Backpatch commit 7bc9a8bdd2 to 13-17. The motivation for backpatching is that
we want to update CI to Debian Trixie. Trixie contains a newer mingw
installation, which would trigger the warning addressed by 7bc9a8bdd2. The
risk of backpatching seems fairly low, given that it did not cause issues in
the branches the commit is already present.
While CI is not present in 13-14, it seems better to be consistent across
branches.
Author: Thomas Munro <tmunro@postgresql.org>
Discussion: https://postgr.es/m/o5yadhhmyjo53svzwvaocww6zkrp63i4f32cw3treuh46pxtza@hyqio5b2tkt6
Backpatch-through: 13
A generated column may end up being part of the partition key
expression, if it's specified as an expression e.g. "(<generated
column name>)" or if the partition key expression contains a whole-row
reference, even though we do not allow a generated column to be part
of partition key expression. Fix this hole.
Co-authored-by: jian he <jian.universality@gmail.com>
Co-authored-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Discussion: https://www.postgresql.org/message-id/flat/CACJufxF%3DWDGthXSAQr9thYUsfx_1_t9E6N8tE3B8EqXcVoVfQw%40mail.gmail.com
It's possible to define BRIN indexes on functions that require a
snapshot to run, but the autosummarization feature introduced by commit
7526e10224 fails to provide one. This causes autovacuum to leave a
BRIN placeholder tuple behind after a failed work-item execution, making
such indexes less efficient. Repair by obtaining a snapshot prior to
running the task, and add a test to verify this behavior.
Author: Álvaro Herrera <alvherre@kurilemu.de>
Reported-by: Giovanni Fabris <giovanni.fabris@icon.it>
Reported-by: Arthur Nascimento <tureba@gmail.com>
Backpatch-through: 13
Discussion: https://postgr.es/m/202511031106.h4fwyuyui6fz@alvherre.pgsql
Commit b4f584f9d2 (affecting v15~, later backpatched down to 13 as of
3635a0a35a) introduced an unconditional WAL receiver shutdown when
switching from streaming to archive WAL sources. This causes problems
during a timeline switch, when a WAL receiver enters WALRCV_WAITING
state but remains alive, waiting for instructions.
The unconditional shutdown can break some monitoring scenarios as the
WAL receiver gets repeatedly terminated and re-spawned, causing
pg_stat_wal_receiver.status to show a "streaming" instead of "waiting"
status, masking the fact that the WAL receiver is waiting for a new TLI
and a new LSN to be able to continue streaming.
This commit changes the WAL receiver behavior so as the shutdown becomes
conditional, with InstallXLogFileSegmentActive being always reset to
prevent the regression fixed by b4f584f9d2: only terminate the WAL
receiver when it is actively streaming (WALRCV_STREAMING,
WALRCV_STARTING, or WALRCV_RESTARTING). When in WALRCV_WAITING state,
just reset InstallXLogFileSegmentActive flag to allow archive
restoration without killing the process. WALRCV_STOPPED and
WALRCV_STOPPING are not reachable states in this code path. For the
latter, the startup process is the one in charge of setting
WALRCV_STOPPING via ShutdownWalRcv(), waiting for the WAL receiver to
reach a WALRCV_STOPPED state after switching walRcvState, so
WaitForWALToBecomeAvailable() cannot be reached while a WAL receiver is
in a WALRCV_STOPPING state.
A regression test is added to check that a WAL receiver is not stopped
on timeline jump, that fails when the fix of this commit is reverted.
Reported-by: Ryan Bird <ryanzxg@gmail.com>
Author: Xuneng Zhou <xunengzhou@gmail.com>
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/19093-c4fff49a608f82a0@postgresql.org
Backpatch-through: 13
When dealing with ResultRelInfos for partitions, there are cases where
there are mixed requirements for the ri_RootResultRelInfo. There are
cases when the partition itself requires a NULL ri_RootResultRelInfo and
in the same query, the same partition may require a ResultRelInfo with
its parent set in ri_RootResultRelInfo. This could cause the column
mapping between the partitioned table and the partition not to be done
which could result in crashes if the column attnums didn't match
exactly.
The fix is simple. We now check that the ri_RootResultRelInfo matches
what the caller passed to ExecGetTriggerResultRel() and only return a
cached ResultRelInfo when the ri_RootResultRelInfo matches what the
caller wants, otherwise we'll make a new one.
Author: David Rowley <dgrowleyml@gmail.com>
Author: Amit Langote <amitlangote09@gmail.com>
Reported-by: Dmitry Fomin <fomin.list@gmail.com>
Discussion: https://postgr.es/m/7DCE78D7-0520-4207-822B-92F60AEA14B4@gmail.com
Backpatch-through: 15
The revised logic in 001_ssltests.pl would fail if openssl
doesn't work or if Perl is a 32-bit build, because it had
already overwritten $serialno with something inappropriate
to use in the eventual match. We could go back to the
previous code layout, but it seems best to introduce a
separate variable for the output of openssl.
Per failure on buildfarm member mamba, which has a 32-bit Perl.
The SSL tests for pg_stat_ssl tries to exactly match the serial
from the certificate by extracting it with the openssl binary.
If that fails due to the binary not being available, a fallback
match is used, but the attempt to execute a missing binary adds
a warning to the output which can confuse readers for a failure
in the test. Fix by only attempting if the openssl binary was
found by autoconf/meson.
Backpatch down to v16 where commit c8e4030d1b made the test
use the OPENSSL variable from autoconf/meson instead of a hard-
coded value.
Author: Daniel Gustafsson <daniel@yesql.se>
Reported-by: Christoph Berg <myon@debian.org>
Discussion: https://postgr.es/m/aNPSp1-RIAs3skZm@msg.df7cb.de
Backpatch-through: 16
Commit 71f4c8c6f7 (which implemented DETACH CONCURRENTLY) added code
to create a separate table constraint when a table is detached
concurrently, identical to the partition constraint, on the theory that
such a constraint was needed in case the optimizer had constructed any
query plans that depended on the constraint being there. However, that
theory was apparently bogus because any such plans would be invalidated.
For hash partitioning, those constraints are problematic, because their
expressions reference the OID of the parent partitioned table, to which
the detached table is no longer related; this causes all sorts of
problems (such as inability of restoring a pg_dump of that table, and
the table no longer working properly if the partitioned table is later
dropped).
We'd like to get rid of all those constraints. In fact, for branch
master, do that -- no longer create any substitute constraints.
However, out of fear that some users might somehow depend on these
constraints for other partitioning strategies, for stable branches
(back to 14, which added DETACH CONCURRENTLY), only do it for hash
partitioning.
(If you repeatedly DETACH CONCURRENTLY and then ATTACH a partition, then
with this constraint addition you don't need to scan the table in the
ATTACH step, which presumably is good. But if users really valued this
feature, they would have requested that it worked for non-concurrent
DETACH also.)
Author: Haiyang Li <mohen.lhy@alibaba-inc.com>
Reported-by: Fei Changhong <feichanghong@qq.com>
Reported-by: Haiyang Li <mohen.lhy@alibaba-inc.com>
Backpatch-through: 14
Discussion: https://postgr.es/m/18371-7fef49f63de13f02@postgresql.org
Discussion: https://postgr.es/m/19070-781326347ade7c57@postgresql.org
Neighbor get_statistics_object_oid() ignores objects in pg_temp, as has
been the standard for non-relation, non-type namespace searches since
CVE-2007-2138. Hence, most operations that name a statistics object
correctly decline to map an unqualified name to a statistics object in
pg_temp. StatisticsObjIsVisibleExt() did not. Consequently,
pg_statistics_obj_is_visible() wrongly returned true for such objects,
psql \dX wrongly listed them, and getObjectDescription()-based ereport()
and pg_describe_object() wrongly omitted namespace qualification. Any
malfunction beyond that would depend on how a human or application acts
on those wrong indications. Commit
d99d58cdc8 introduced this. Back-patch to
v13 (all supported versions).
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Discussion: https://postgr.es/m/20250920162116.2e.nmisch@google.com
Backpatch-through: 13
The functions test_stat_func() and test_stat_func2() had empty
function bodies, so that they took very little time to run. This made
it possible that on machines with relatively low timer resolution the
functions could return before the clock advanced, making the test fail
(as seen on buildfarm members fruitcrow and hamerkop).
To avoid that, pg_sleep for 10us during the functions. As far as we
can tell, all current hardware has clock resolution much less than
that. (The current implementation of pg_sleep will round it up to
1ms anyway, but someday that might get improved.)
Author: Michael Banck <mbanck@gmx.net>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/68d413a3.a70a0220.24c74c.8be9@mx.google.com
Backpatch-through: 15
If an aggregate function call contains a sub-select that has
an RTE referencing a CTE outside the aggregate, we must treat
that reference like a Var referencing the CTE's query level
for purposes of determining the aggregate's level. Otherwise
we might reach the nonsensical conclusion that the aggregate
should be evaluated at some query level higher than the CTE,
ending in a planner error or a broken plan tree that causes
executor failures.
Bug: #19055
Reported-by: BugForge <dllggyx@outlook.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/19055-6970cfa8556a394d@postgresql.org
Backpatch-through: 13
The EvalPlanQual recheck for TID Range Scan wasn't rechecking the TID qual
still passed after following update chains. This could result in tuples
being updated or deleted by plans using TID Range Scans where the ctid of
the new (updated) tuple no longer matches the clause of the scan. This
isn't desired behavior, and isn't consistent with what would happen if the
chosen plan had used an Index or Seq Scan, and that could lead to hard to
predict behavior for scans that contain TID quals and other quals as the
planner has freedom to choose TID Range or some other non-TID scan method
for such queries, and the chosen plan could change at any moment.
Here we fix this by properly implementing the recheck function for TID
Range Scans.
Backpatch to 14, where TID Range Scans were added
Reported-by: Sophie Alpert <pg@sophiebits.com>
Author: Sophie Alpert <pg@sophiebits.com>
Author: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/4a6268ff-3340-453a-9bf5-c98d51a6f729@app.fastmail.com
Backpatch-through: 14
The EvalPlanQual recheck for TID Scan wasn't rechecking the TID qual
still passed after following update chains. This could result in tuples
being updated or deleted by plans using TID Scans where the ctid of the
new (updated) tuple no longer matches the clause of the scan. This isn't
desired behavior, and isn't consistent with what would happen if the
chosen plan had used an Index or Seq Scan, and that could lead to hard to
predict behavior for scans that contain TID quals and other quals as the
planner has freedom to choose TID or some other scan method for such
queries, and the chosen plan could change at any moment.
Here we fix this by properly implementing the recheck function for TID
Scans.
Backpatch to 13, oldest supported version
Reported-by: Sophie Alpert <pg@sophiebits.com>
Author: Sophie Alpert <pg@sophiebits.com>
Author: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/4a6268ff-3340-453a-9bf5-c98d51a6f729@app.fastmail.com
Backpatch-through: 13
JsonConstructorExpr can produce non-NULL output with a NULL input, so
it should be treated as a non-strict construct. Failing to do so can
lead to incorrect query behavior.
For example, in the reported case, when pulling up a subquery that is
under an outer join, if the subquery's target list contains a
JsonConstructorExpr that uses subquery variables and it is mistakenly
treated as strict, it will be pulled up without being wrapped in a
PlaceHolderVar. As a result, the expression will be evaluated at the
wrong place and will not be forced to null when the outer join should
do so.
Back-patch to v16 where JsonConstructorExpr was introduced.
Bug: #19046
Reported-by: Runyuan He <runyuan@berkeley.edu>
Author: Tender Wang <tndrwang@gmail.com>
Co-authored-by: Richard Guo <guofenglinux@gmail.com>
Discussion: https://postgr.es/m/19046-765b6602b0a8cfdf@postgresql.org
Backpatch-through: 16
Commit e3ffc3e91 fixed the translation of character classes in
SIMILAR TO regular expressions. Unfortunately the fix broke a corner
case: if there is an escape character right after the opening bracket
(for example in "[\q]"), a closing bracket right after the escape
sequence would not be seen as closing the character class.
There were two more oversights: a backslash or a nested opening bracket
right at the beginning of a character class should remove the special
meaning from any following caret or closing bracket.
This bug suggests that this code needs to be more readable, so also
rename the variables "charclass_depth" and "charclass_start" to
something more meaningful, rewrite an "if" cascade to be more
consistent, and improve the commentary.
Reported-by: Dominique Devienne <ddevienne@gmail.com>
Reported-by: Stephan Springl <springl-psql@bfw-online.de>
Author: Laurenz Albe <laurenz.albe@cybertec.at>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAFCRh-8NwJd0jq6P=R3qhHyqU7hw0BTor3W0SvUcii24et+zAw@mail.gmail.com
Backpatch-through: 13
Commit a0b99fc12 caused pg_event_trigger_dropped_objects()
to not fill the object_name field for schemas, which it
should have; and caused it to fill the object_name field
for default values, which it should not have.
In addition, triggers and RLS policies really should behave
the same way as we're making column defaults do; that is,
they should have is_temporary = true if they belong to a
temporary table.
Fix those things, and upgrade event_trigger.sql's woefully
inadequate test coverage of these secondary output columns.
As before, back-patch only to v15.
Reported-by: Sergey Shinderuk <s.shinderuk@postgrespro.ru>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/bd7b4651-1c26-4d30-832b-f942fabcb145@postgrespro.ru
Backpatch-through: 15
pg_event_trigger_dropped_objects() would report a column default
object with is_temporary = false, even if it belongs to a
temporary table. This seems clearly wrong, so adjust it to
report the table's temp-ness.
While here, refactor EventTriggerSQLDropAddObject to make its
handling of namespace objects less messy and avoid duplication
of the schema-lookup code. And add some explicit test coverage
of dropped-object reports for dependencies of temp tables.
Back-patch to v15. The bug exists further back, but the
GetAttrDefaultColumnAddress function this patch depends on does not,
and it doesn't seem worth adjusting it to cope with the older code.
Author: Antoine Violin <violin.antuan@gmail.com>
Co-authored-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAFjUV9x3-hv0gihf+CtUc-1it0hh7Skp9iYFhMS7FJjtAeAptA@mail.gmail.com
Backpatch-through: 15
When executing a MERGE UPDATE action, if there is more than one
concurrent update of the target row, the lock-and-retry code would
sometimes incorrectly identify the latest version of the target tuple,
leading to incorrect results.
This was caused by using the ctid field from the TM_FailureData
returned by table_tuple_lock() in a case where the result was TM_Ok,
which is unsafe because the TM_FailureData struct is not guaranteed to
be fully populated in that case. Instead, it should use the tupleid
passed to (and updated by) table_tuple_lock().
To reduce the chances of similar errors in the future, improve the
commentary for table_tuple_lock() and TM_FailureData to make it
clearer that table_tuple_lock() updates the tid passed to it, and most
fields of TM_FailureData should not be relied on in non-failure cases.
An exception to this is the "traversed" field, which is set in both
success and failure cases.
Reported-by: Dmitry <dsy.075@yandex.ru>
Author: Yugo Nagata <nagata@sraoss.co.jp>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/1570d30e-2b95-4239-b9c3-f7bf2f2f8556@yandex.ru
Backpatch-through: 15
When executing a MERGE, check that the target relation supports all
actions mentioned in the MERGE command. Specifically, check that it
has a REPLICA IDENTITY if it publishes updates or deletes and the
MERGE command contains update or delete actions. Failing to do this
can silently break replication.
Author: Zhijie Hou <houzj.fnst@fujitsu.com>
Reviewed-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Tested-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/OS3PR01MB57180C87E43A679A730482DF94B62@OS3PR01MB5718.jpnprd01.prod.outlook.com
Backpatch-through: 15
If an INSERT has an ON CONFLICT DO UPDATE clause, the executor must
check that the target relation supports UPDATE as well as INSERT. In
particular, it must check that the target relation has a REPLICA
IDENTITY if it publishes updates. Formerly, it was not doing this
check, which could lead to silently breaking replication.
Fix by adding such a check to CheckValidResultRel(), which requires
adding a new onConflictAction argument. In back-branches, preserve ABI
compatibility by introducing a wrapper function with the original
signature.
Author: Zhijie Hou <houzj.fnst@fujitsu.com>
Reviewed-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Tested-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/OS3PR01MB57180C87E43A679A730482DF94B62@OS3PR01MB5718.jpnprd01.prod.outlook.com
Backpatch-through: 13
I think the error message for a different condition was inadvertently
copied.
This problem seems to have been introduced by commit a4d75c86bf.
Author: Álvaro Herrera <alvherre@kurilemu.de>
Reported-by: jian he <jian.universality@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Backpatch-through: 14
Discussion: https://postgr.es/m/CACJufxEZ48toGH0Em_6vdsT57Y3L8pLF=DZCQ_gCii6=C3MeXw@mail.gmail.com
v17 introduced the MAINTAIN ON TABLES privilege. That changed the
applicable "baseacls" reaching buildACLCommands(). That yielded
spurious TestUpgradeXversion diffs. Change to use a TYPES privilege.
Types have the same one privilege in all supported versions, so they
avoid the problem. Per buildfarm. Back-patch to v13, like that commit.
Discussion: https://postgr.es/m/20250823144505.88.nmisch@google.com
Backpatch-through: 13
Commit 0decd5e89d missed DO_DEFAULT_ACL,
leading to assertion failures, potential dump order instability, and
spurious schema diffs. Back-patch to v13, like that commit.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Author: Kirill Reshke <reshkekirill@gmail.com>
Discussion: https://postgr.es/m/d32aaa8d-df7c-4f94-bcb3-4c85f02bea21@gmail.com
Backpatch-through: 13
Temporary relations may share the same RelFileNumber with a permanent
relation, or other temporary relations associated with other sessions.
Being able to uniquely identify a temporary relation would require
RelidByRelfilenumber() to know about the proc number of the temporary
relation it wants to identify, something it is not designed for since
its introduction in f01d1ae3a1.
There are currently three callers of RelidByRelfilenumber():
- autoprewarm.
- Logical decoding, reorder buffer.
- pg_filenode_relation(), that attempts to find a relation OID based on
a tablespace OID and a RelFileNumber.
This makes the situation problematic particularly for the first two
cases, leading to the possibility of random ERRORs due to
inconsistencies that temporary relations can create in the cache
maintained by RelidByRelfilenumber(). The third case should be less of
an issue, as I suspect that there are few direct callers of
pg_filenode_relation().
The window where the ERRORs are happen is very narrow, requiring an OID
wraparound to create a lookup conflict in RelidByRelfilenumber() with a
temporary table reusing the same OID as another relation already cached.
The problem is easier to reach in workloads with a high OID consumption
rate, especially with a higher number of temporary relations created.
We could get pg_filenode_relation() and RelidByRelfilenumber() to work
with temporary relations if provided the means to identify them with an
optional proc number given in input, but the years have also shown that
we do not have a use case for it, yet. Note that this could not be
backpatched if pg_filenode_relation() needs changes. It is simpler to
ignore temporary relations.
Reported-by: Shenhao Wang <wangsh.fnst@fujitsu.com>
Author: Vignesh C <vignesh21@gmail.com>
Reviewed-By: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-By: Takamichi Osumi <osumi.takamichi@fujitsu.com>
Reviewed-By: Michael Paquier <michael@paquier.xyz>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Reported-By: Shenhao Wang <wangsh.fnst@fujitsu.com>
Discussion: https://postgr.es/m/bbaaf9f9-ebb2-645f-54bb-34d6efc7ac42@fujitsu.com
Backpatch-through: 13
Some replication slot manipulations (logical decoding via SQL,
advancing) were failing an assertion when releasing a slot in
single-user mode, because active_pid was not set in a ReplicationSlot
when its slot is acquired.
ReplicationSlotAcquire() has some logic to be able to work with the
single-user mode. This commit sets ReplicationSlot->active_pid to
MyProcPid, to let the slot-related logic fall-through, considering the
single process as the one holding the slot.
Some TAP tests are added for various replication slot functions with the
single-user mode, while on it, for slot creation, drop, advancing, copy
and logical decoding with multiple slot types (temporary, physical vs
logical). These tests are skipped on Windows, as direct calls of
postgres --single would fail on permission failures. There is no
platform-specific behavior that needs to be checked, so living with this
restriction should be fine. The CI is OK with that, now let's see what
the buildfarm tells.
Author: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Paul A. Jungwirth <pj@illuminatedcomputing.com>
Reviewed-by: Mutaamba Maasha <maasha@gmail.com>
Discussion: https://postgr.es/m/OSCPR01MB14966ED588A0328DAEBE8CB25F5FA2@OSCPR01MB14966.jpnprd01.prod.outlook.com
Backpatch-through: 13
The DROP SUBSCRIPTION command performs several operations: it stops the
subscription workers, removes subscription-related entries from system
catalogs, and deletes the replication slot on the publisher server.
Previously, this command acquired an AccessExclusiveLock on
pg_subscription before initiating these steps.
However, while holding this lock, the command attempts to connect to the
publisher to remove the replication slot. In cases where the connection is
made to a newly created database on the same server as subscriber, the
cache-building process during connection tries to acquire an
AccessShareLock on pg_subscription, resulting in a self-deadlock.
To resolve this issue, we reduce the lock level on pg_subscription during
DROP SUBSCRIPTION from AccessExclusiveLock to RowExclusiveLock. Earlier,
the higher lock level was used to prevent the launcher from starting a new
worker during the drop operation, as a restarted worker could become
orphaned.
Now, instead of relying on a strict lock, we acquire an AccessShareLock on
the specific subscription being dropped and re-validate its existence
after acquiring the lock. If the subscription is no longer valid, the
worker exits gracefully. This approach avoids the deadlock while still
ensuring that orphan workers are not created.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Author: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: vignesh C <vignesh21@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Backpatch-through: 13
Discussion: https://postgr.es/m/18988-7312c868be2d467f@postgresql.org
A malicious server could inject psql meta-commands into plain-text
dump output (i.e., scripts created with pg_dump --format=plain,
pg_dumpall, or pg_restore --file) that are run at restore time on
the machine running psql. To fix, introduce a new "restricted"
mode in psql that blocks all meta-commands (except for \unrestrict
to exit the mode), and teach pg_dump, pg_dumpall, and pg_restore to
use this mode in plain-text dumps.
While at it, encourage users to only restore dumps generated from
trusted servers or to inspect it beforehand, since restoring causes
the destination to execute arbitrary code of the source superusers'
choice. However, the client running the dump and restore needn't
trust the source or destination superusers.
Reported-by: Martin Rakhmanov
Reported-by: Matthieu Denais <litezeraw@gmail.com>
Reported-by: RyotaK <ryotak.mail@gmail.com>
Suggested-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Security: CVE-2025-8714
Backpatch-through: 13
Commit e2d4ef8de8 (the fix for CVE-2017-7484) added security checks
to the selectivity estimation functions to prevent them from running
user-supplied operators on data obtained from pg_statistic if the user
lacks privileges to select from the underlying table. In cases
involving inheritance/partitioning, those checks were originally
performed against the child RTE (which for plain inheritance might
actually refer to the parent table). Commit 553d2ec271 then extended
that to also check the parent RTE, allowing access if the user had
permissions on either the parent or the child. It turns out, however,
that doing any checks using the child RTE is incorrect, since
securityQuals is set to NULL when creating an RTE for an inheritance
child (whether it refers to the parent table or the child table), and
therefore such checks do not correctly account for any RLS policies or
security barrier views. Therefore, do the security checks using only
the parent RTE. This is consistent with how RLS policies are applied,
and the executor's ACL checks, both of which use only the parent
table's permissions/policies. Similar checks are performed in the
extended stats code, so update that in the same way, centralizing all
the checks in a new function.
In addition, note that these checks by themselves are insufficient to
ensure that the user has access to the table's data because, in a
query that goes via a view, they only check that the view owner has
permissions on the underlying table, not that the current user has
permissions on the view itself. In the selectivity estimation
functions, there is no easy way to navigate from underlying tables to
views, so add permissions checks for all views mentioned in the query
to the planner startup code. If the user lacks permissions on a view,
a permissions error will now be reported at planner-startup, and the
selectivity estimation functions will not be run.
Checking view permissions at planner-startup in this way is a little
ugly, since the same checks will be repeated at executor-startup.
Longer-term, it might be better to move all the permissions checks
from the executor to the planner so that permissions errors can be
reported sooner, instead of creating a plan that won't ever be run.
However, such a change seems too far-reaching to be back-patched.
Back-patch to all supported versions. In v13, there is the added
complication that UPDATEs and DELETEs on inherited target tables are
planned using inheritance_planner(), which plans each inheritance
child table separately, so that the selectivity estimation functions
do not know that they are dealing with a child table accessed via its
parent. Handle that by checking access permissions on the top parent
table at planner-startup, in the same way as we do for views. Any
securityQuals on the top parent table are moved down to the child
tables by inheritance_planner(), so they continue to be checked by the
selectivity estimation functions.
Author: Dean Rasheed <dean.a.rasheed@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Noah Misch <noah@leadboat.com>
Backpatch-through: 13
Security: CVE-2025-8713
This function is called from ATExecAttachPartition/ATExecAddInherit,
which prevent tables with row-level triggers with transition tables from
becoming partitions or inheritance children, to check if there is such a
trigger on the given table, but failed to check if a found trigger is
row-level, causing the caller functions to needlessly prevent a table
with only a statement-level trigger with transition tables from becoming
a partition or inheritance child. Repair.
Oversight in commit 501ed02cf.
Author: Etsuro Fujita <etsuro.fujita@gmail.com>
Discussion: https://postgr.es/m/CAPmGK167mXzwzzmJ_0YZ3EZrbwiCxtM1vogH_8drqsE6PtxRYw%40mail.gmail.com
Backpatch-through: 13
Import usleep, which, due to an oversight in oversight in commit
48796a98d5 was used but not imported.
Correct the comparison string used in two logfile checks. Previously, it
was incorrect and thus the test could never have failed.
Also wordsmith a comment to make it clear when hot_standby_feedback is
meant to be on during the test scenarios.
Reported-by: Melanie Plageman <melanieplageman@gmail.com>
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/flat/CAAKRu_YO2mEm%3DZWZKPjTMU%3DgW5Y83_KMi_1cr51JwavH0ctd7w%40mail.gmail.com
Backpatch-through: 16
pg_dump sorts objects by their logical names, e.g. (nspname, relname,
tgname), before dependency-driven reordering. That removes one source
of logically-identical databases differing in their schema-only dumps.
In other words, it helps with schema diffing. The logical name sort
ignored essential sort keys for constraints, operators, PUBLICATION
... FOR TABLE, PUBLICATION ... FOR TABLES IN SCHEMA, operator classes,
and operator families. pg_dump's sort then depended on object OID,
yielding spurious schema diffs. After this change, OIDs affect dump
order only in the event of catalog corruption. While pg_dump also
wrongly ignored pg_collation.collencoding, CREATE COLLATION restrictions
have been keeping that imperceptible in practical use.
Use techniques like we use for object types already having full sort key
coverage. Where the pertinent queries weren't fetching the ignored sort
keys, this adds columns to those queries and stores those keys in memory
for the long term.
The ignorance of sort keys became more problematic when commit
172259afb5 added a schema diff test
sensitive to it. Buildfarm member hippopotamus witnessed that.
However, dump order stability isn't a new goal, and this might avoid
other dump comparison failures. Hence, back-patch to v13 (all supported
versions).
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/20250707192654.9e.nmisch@google.com
Backpatch-through: 13
We skip dumping constraints together with domains if they are invalid
('separate') so that they appear after data -- but their comments were
dumped together with the domain definition, which in effect leads to the
comment being dumped when the constraint does not yet exist. Delay
them in the same way.
Oversight in 7eca575d1c28; backpatch all the way back.
Author: jian he <jian.universality@gmail.com>
Discussion: https://postgr.es/m/CACJufxF_C2pe6J_+nPr6C5jf5rQnbYP8XOKr4HM8yHZtp2aQqQ@mail.gmail.com
getid() and putid(), which parse and deparse role names within ACL
input/output, applied isalnum() to see if a character within a role
name requires quoting. They did this even for non-ASCII characters,
which is problematic because the results would depend on encoding,
locale, and perhaps even platform. So it's possible that putid()
could elect not to quote some string that, later in some other
environment, getid() will decide is not a valid identifier, causing
dump/reload or similar failures.
To fix this in a way that won't risk interoperability problems
with unpatched versions, make getid() treat any non-ASCII as a
legitimate identifier character (hence not requiring quotes),
while making putid() treat any non-ASCII as requiring quoting.
We could remove the resulting excess quoting once we feel that
no unpatched servers remain in the wild, but that'll be years.
A lesser problem is that getid() did the wrong thing with an input
consisting of just two double quotes (""). That has to represent an
empty string, but getid() read it as a single double quote instead.
The case cannot arise in the normal course of events, since we don't
allow empty-string role names. But let's fix it while we're here.
Although we've not heard field reports of problems with non-ASCII
role names, there's clearly a hazard there, so back-patch to all
supported versions.
Reported-by: Peter Eisentraut <peter@eisentraut.org>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/3792884.1751492172@sss.pgh.pa.us
Backpatch-through: 13
Attempting to use commit timestamps during bootstrapping leads to an
assertion failure, that can be reached for example with an initdb -c
that enables track_commit_timestamp. It makes little sense to register
a commit timestamp for a BootstrapTransactionId, so let's disable the
activation of the module in this case.
This problem has been independently reported once by each author of this
commit. Each author has proposed basically the same patch, relying on
IsBootstrapProcessingMode() to skip the use of commit_ts during
bootstrap. The test addition is a suggestion by me, and is applied down
to v16.
Author: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Author: Andy Fan <zhihuifan1213@163.com>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/OSCPR01MB14966FF9E4C4145F37B937E52F5102@OSCPR01MB14966.jpnprd01.prod.outlook.com
Discussion: https://postgr.es/m/87plejmnpy.fsf@163.com
Backpatch-through: 13
