When using integer timestamps, the interval-comparison functions tried
to compute the overall magnitude of an interval as an int64 number of
microseconds. As reported by Frazer McLean, this overflows for intervals
exceeding about 296000 years, which is bad since we nominally allow
intervals many times larger than that. That results in wrong comparison
results, and possibly in corrupted btree indexes for columns containing
such large interval values.
To fix, compute the magnitude as int128 instead. Although some compilers
have native support for int128 calculations, many don't, so create our
own support functions that can do 128-bit addition and multiplication
if the compiler support isn't there. These support functions are designed
with an eye to allowing the int128 code paths in numeric.c to be rewritten
for use on all platforms, although this patch doesn't do that, or even
provide all the int128 primitives that will be needed for it.
Back-patch as far as 9.4. Earlier releases did not guard against overflow
of interval values at all (commit 146604ec4 fixed that), so it seems not
very exciting to worry about overly-large intervals for them.
Before 9.6, we did not assume that unreferenced "static inline" functions
would not draw compiler warnings, so omit functions not directly referenced
by timestamp.c, the only present consumer of int128.h. (We could have
omitted these functions in HEAD too, but since they were written and
debugged on the way to the present patch, and they look likely to be needed
by numeric.c, let's keep them in HEAD.) I did not bother to try to prevent
such warnings in a --disable-integer-datetimes build, though.
Before 9.5, configure will never define HAVE_INT128, so the part of
int128.h that exploits a native int128 implementation is dead code in the
9.4 branch. I didn't bother to remove it, thinking that keeping the file
looking similar in different branches is more useful.
In HEAD only, add a simple test harness for int128.h in src/tools/.
In back branches, this does not change the float-timestamps code path.
That's not subject to the same kind of overflow risk, since it computes
the interval magnitude as float8. (No doubt, when this code was originally
written, overflow was disregarded for exactly that reason.) There is a
precision hazard instead :-(, but we'll avert our eyes from that question,
since no complaints have been reported and that code's deprecated anyway.
Kyotaro Horiguchi and Tom Lane
Discussion: https://postgr.es/m/1490104629.422698.918452336.26FA96B7@webmail.messagingengine.com
On EXEC_BACKEND builds, this can fail if ASLR is in use.
Backpatch to 9.5. On master, completely remove the bgw_main field
completely, since there is no situation in which it is safe for an
EXEC_BACKEND build. On 9.6 and 9.5, leave the field intact to avoid
breaking things for third-party code that doesn't care about working
under EXEC_BACKEND. Prior to 9.5, there are no in-core bgworker
entrypoints.
Petr Jelinek, reviewed by me.
Discussion: http://postgr.es/m/09d8ad33-4287-a09b-a77f-77f8761adb5e@2ndquadrant.com
The original coding was trying to use a TypeName as a string Value,
which doesn't work; an oversight in my commit a61fd533. Repair.
Also, make sure we cover the broken case in the relevant test script.
Backpatch to 9.5.
Discussion: https://postgr.es/m/20170315151829.bhxsvrp75xdxhm3n@alvherre.pgsql
Rather than waiting around for statement_timeout to expire, we can just
try to take the table's lock in nowait mode. This saves some fraction
under 4 seconds when running this test with prepared xacts available,
and it guards against timeout-expired-anyway failures on very slow
machines when prepared xacts are not available, as seen in a recent
failure on axolotl for instance.
This approach could fail if autovacuum were to take an exclusive lock
on the test table concurrently, but there's no reason for it to do so.
Since the main point here is to improve stability in the buildfarm,
back-patch to all supported branches.
The IANA timezone crew continues to chip away at their project of removing
timezone abbreviations that have no real-world currency from their
database. The tzdata2017a update removes all such abbreviations for
South American zones, as well as much of the Pacific. This breaks some
test cases in timestamptz.sql that were expecting America/Santiago and
America/Caracas to have non-numeric abbreviations.
The test cases involving America/Santiago seem to have selected that
zone more or less at random, so just replace it with America/New_York,
which is of similar longitude. The cases involving America/Caracas are
harder since they were chosen to test a time-varying zone abbreviation
around a point where it changed meaning in the backwards direction.
Fortunately, Europe/Moscow has a similar case in 2014, and the MSK/MSD
abbreviations are well enough attested that IANA seems unlikely to
decide to remove them from the database in future.
With these changes, this regression test should pass when using any IANA
zone database from 2015 or later. One could wish that there were a few
years more daylight on how out-of-date your zone database can be ... but
really the --with-system-tzdata option is only meant for use on platforms
where the zone database is kept up-to-date pretty faithfully, so I do not
think this is a big objection.
Discussion: https://postgr.es/m/6749.1489087470@sss.pgh.pa.us
When performing a pg_upgrade, we copy the files behind pg_largeobject
and pg_largeobject_metadata, allowing us to avoid having to dump out and
reload the actual data for large objects and their ACLs.
Unfortunately, that isn't all of the information which can be associated
with large objects. Currently, we also support COMMENTs and SECURITY
LABELs with large objects and these were being silently dropped during a
pg_upgrade as pg_dump would skip everything having to do with a large
object and pg_upgrade only copied the tables mentioned to the new
cluster.
As the file copies happen after the catalog dump and reload, we can't
simply include the COMMENTs and SECURITY LABELs in pg_dump's binary-mode
output but we also have to include the actual large object definition as
well. With the definition, comments, and security labels in the pg_dump
output and the file copies performed by pg_upgrade, all of the data and
metadata associated with large objects is able to be successfully pulled
forward across a pg_upgrade.
In 9.6 and master, we can simply adjust the dump bitmask to indicate
which components we don't want. In 9.5 and earlier, we have to put
explciit checks in in dumpBlob() and dumpBlobs() to not include the ACL
or the data when in binary-upgrade mode.
Adjustments made to the privileges regression test to allow another test
(large_object.sql) to be added which explicitly leaves a large object
with a comment in place to provide coverage of that case with
pg_upgrade.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/20170221162655.GE9812@tamriel.snowman.net
The ALTER TABLE ALTER TYPE implementation can issue DROP INDEX and
CREATE INDEX to refit existing indexes for the new column type. Since
this CREATE INDEX is an implementation detail of an index alteration,
the ensuing DefineIndex() should skip ACL checks specific to index
creation. It already skips the namespace ACL check. Make it skip the
tablespace ACL check, too. Back-patch to 9.2 (all supported versions).
Reviewed by Tom Lane.
Our current DDL only allows a database name to be specified in COMMENT
ON DATABASE, which Andrew Dunstan reports to make this test fail on the
buildfarm. Remove the line until we gain a DDL command that allows the
current database to be operated on without having the specify it by
name.
Backpatch to 9.5, where these tests appeared.
Discussion: https://postgr.es/m/e6084b89-07a7-7e57-51ee-d7b8fc9ec864@2ndQuadrant.com
!foo means "the tsvector does not contain foo", and therefore it should
match an empty tsvector. ts_match_vq() overenthusiastically supposed
that an empty tsvector could never match any query, so it forcibly
returned FALSE, the wrong answer. Remove the premature optimization.
Our behavior on this point was inconsistent, because while seqscans and
GIST index searches both failed to match empty tsvectors, GIN index
searches would find them, since GIN scans don't rely on ts_match_vq().
That makes this certainly a bug, not a debatable definition disagreement,
so back-patch to all supported branches.
Report and diagnosis by Tom Dunstan (bug #14515); added test cases by me.
Discussion: https://postgr.es/m/20170126025524.1434.97828@wrigleys.postgresql.org
Thinko in commit a4523c5aa. It doesn't really affect anything at
present, but it would be a problem if any tests added later in this
file ought to get index-only-scan plans. Back-patch, like the previous
commit, just to avoid surprises in case we add such a test and then
back-patch it.
Nikita Glukhov
Discussion: https://postgr.es/m/8b70135d-ad38-bdd8-ac92-71e2b3c273cf@postgrespro.ru
These resulted in wrong answers if the relabeled argument could be matched
to an index column, as shown in bug #14504 from Evgeniy Kozlov. We might
be able to resurrect these optimizations by adjusting the planner's
treatment of RelabelType, or by adjusting btree's rules for selecting
comparison functions, but either solution will take careful analysis
and does not sound like a fit candidate for backpatching.
I left the catalog infrastructure in place and just reduced the transform
functions to always-return-NULL. This would be necessary anyway in the
back branches, and it doesn't seem important to be more invasive in HEAD.
Bug introduced by commit b8a18ad48. Back-patch to 9.5 where that came in.
Report: https://postgr.es/m/20170118144828.1432.52823@wrigleys.postgresql.org
Discussion: https://postgr.es/m/18771.1484759439@sss.pgh.pa.us
If inherited tables don't have exactly the same schema, the USING clause
in an ALTER TABLE / SET DATA TYPE misbehaves when applied to the
children tables since commit 9550e8348b. Starting with that commit,
the attribute numbers in the USING expression are fixed during parse
analysis. This can lead to bogus errors being reported during
execution, such as:
ERROR: attribute 2 has wrong type
DETAIL: Table has type smallint, but query expects integer.
Since it wouldn't do to revert to the original coding, we now apply a
transformation to map the attribute numbers to the correct ones for each
child.
Reported by Justin Pryzby
Analysis by Tom Lane; patch by me.
Discussion: https://postgr.es/m/20170102225618.GA10071@telsasoft.com
array_fill(..., array[0]) produced an empty array, which is probably
what users expect, but it was a one-dimensional zero-length array
which is not our standard representation of empty arrays. Also, for
no very good reason, it rejected empty input arrays; that case should
be allowed and produce an empty output array.
In passing, remove the restriction that the input array(s) have lower
bound 1. That seems rather pointless, and it would have needed extra
complexity to make the check deal with empty input arrays.
Per bug #14487 from Andrew Gierth. It's been broken all along, so
back-patch to all supported branches.
Discussion: https://postgr.es/m/20170105152156.10135.64195@wrigleys.postgresql.org
Inheritance operations must treat the OID column, if any, much like
regular user columns. But MergeAttributesIntoExisting() neglected to
do that, leading to weird results after a table with OIDs is associated
to a parent with OIDs via ALTER TABLE ... INHERIT.
Report and patch by Amit Langote, reviewed by Ashutosh Bapat, some
adjustments by me. It's been broken all along, so back-patch to
all supported branches.
Discussion: https://postgr.es/m/cb13cfe7-a48c-5720-c383-bb843ab28298@lab.ntt.co.jp
interval_transform() contained two separate bugs that caused it to
sometimes mistakenly decide that a cast from interval to restricted
interval is a no-op and throw it away.
First, it was wrong to rely on dt.h's field type macros to have an
ordering consistent with the field's significance; in one case they do
not. This led to mistakenly treating YEAR as less significant than MONTH,
so that a cast from INTERVAL MONTH to INTERVAL YEAR was incorrectly
discarded.
Second, fls(1<<k) produces k+1 not k, so comparing its output directly
to SECOND was wrong. This led to supposing that a cast to INTERVAL
MINUTE was really a cast to INTERVAL SECOND and so could be discarded.
To fix, get rid of the use of fls(), and make a function based on
intervaltypmodout to produce a field ID code adapted to the need here.
Per bug #14479 from Piotr Stefaniak. Back-patch to 9.2 where transform
functions were introduced, because this code was born broken.
Discussion: https://postgr.es/m/20161227172307.10135.7747@wrigleys.postgresql.org
When we are altering a text search configuration, we are getting the
tuple from pg_ts_config and using its OID, so use TSConfigRelationId
when invoking any post-alter hooks and setting the object address.
Further, in the functions called from AlterTSConfiguration(), we're
saving information about the command via
EventTriggerCollectAlterTSConfig(), so we should be setting
commandCollected to true. Also add a regression test to
test_ddl_deparse for ALTER TEXT SEARCH CONFIGURATION.
Author: Artur Zakirov, a few additional comments by me
Discussion: https://www.postgresql.org/message-id/57a71eba-f2c7-e7fd-6fc0-2126ec0b39bd%40postgrespro.ru
Back-patch the fix for the InvokeObjectPostAlterHook() call to 9.3 where
it was introduced, and the fix for the ObjectAddressSet() call and
setting commandCollected to true to 9.5 where those changes to
ProcessUtilitySlow() were introduced.
When the input value to a CoerceToDomain expression node is a read-write
expanded datum, we should pass a read-only pointer to any domain CHECK
expressions and then return the original read-write pointer as the
expression result. Previously we were blindly passing the same pointer to
all the consumers of the value, making it possible for a function in CHECK
to modify or even delete the expanded value. (Since a plpgsql function
will absorb a passed-in read-write expanded array as a local variable
value, it will in fact delete the value on exit.)
A similar hazard of passing the same read-write pointer to multiple
consumers exists in domain_check() and in ExecEvalCase, so fix those too.
The fix requires adding MakeExpandedObjectReadOnly calls at the appropriate
places, which is simple enough except that we need to get the data type's
typlen from somewhere. For the domain cases, solve this by redefining
DomainConstraintRef.tcache as okay for callers to access; there wasn't any
reason for the original convention against that, other than not wanting the
API of typcache.c to be any wider than it had to be. For CASE, there's
no good solution except to add a syscache lookup during executor start.
Per bug #14472 from Marcos Castedo. Back-patch to 9.5 where expanded
values were introduced.
Discussion: https://postgr.es/m/15225.1482431619@sss.pgh.pa.us
When CREATE OR REPLACE VIEW acts on an existing view, don't update the
view options until after the view query has been updated.
This is necessary in the case where CREATE OR REPLACE VIEW is used on
an existing view that is not updatable, and the new view is updatable
and specifies the WITH CHECK OPTION. In this case, attempting to apply
the new options to the view before updating its query fails, because
the options are applied using the ALTER TABLE infrastructure which
checks that WITH CHECK OPTION is only applied to an updatable view.
If new columns are being added to the view, that is also done using
the ALTER TABLE infrastructure, but it is important that that still be
done before updating the view query, because the rules system checks
that the query columns match those on the view relation. Added a
comment to explain that, in case someone is tempted to move that to
where the view options are now being set.
Back-patch to 9.4 where WITH CHECK OPTION was added.
Report: https://postgr.es/m/CAEZATCUp%3Dz%3Ds4SzZjr14bfct_bdJNwMPi-gFi3Xc5k1ntbsAgQ%40mail.gmail.com
When there is both a serialization failure and a unique violation,
throw the former rather than the latter. When initially pushed,
this was viewed as a feature to assist application framework
developers, so that they could more accurately determine when to
retry a failed transaction, but a test case presented by Ian
Jackson has shown that this patch can prevent serialization
anomalies in some cases where a unique violation is caught within a
subtransaction, the work of that subtransaction is discarded, and
no error is thrown. That makes this a bug fix, so it is being
back-patched to all supported branches where it is not already
present (i.e., 9.2 to 9.5).
Discussion: https://postgr.es/m/1481307991-16971-1-git-send-email-ian.jackson@eu.citrix.com
Discussion: https://postgr.es/m/22607.56276.807567.924144@mariner.uk.xensource.com
When ts_rewrite()'s replacement argument is an empty tsquery, it's supposed
to simplify any operator nodes whose operand(s) become NULL; but it failed
to do that reliably, because dropvoidsubtree() only examined the top level
of the result tree. Rather than make a second recursive pass, let's just
give the responsibility to dofindsubquery() to simplify while it's doing
the main replacement pass. Per report from Andreas Seltenreich.
Artur Zakirov, with some cosmetic changes by me. Back-patch to all
supported branches.
Discussion: https://postgr.es/m/8737i01dew.fsf@credativ.de
expandRTE() and get_rte_attribute_type() reported the exprType() and
exprTypmod() values of the expressions in the first row of the VALUES as
being the column type/typmod returned by the VALUES RTE. That's fine for
the data type, since we coerce all expressions in a column to have the same
common type. But we don't coerce them to have a common typmod, so it was
possible for rows after the first one to return values that violate the
claimed column typmod. This leads to the incorrect result seen in bug
#14448 from Hassan Mahmood, as well as some other corner-case misbehaviors.
The desired behavior is the same as we use in other type-unification
cases: report the common typmod if there is one, but otherwise return -1
indicating no particular constraint.
We fixed this in HEAD by deriving the typmods during transformValuesClause
and storing them in the RTE, but that's not a feasible solution in the back
branches. Instead, just use a brute-force approach of determining the
correct common typmod during expandRTE() and get_rte_attribute_type().
Simple testing says that that doesn't really cost much, at least not in
common cases where expandRTE() is only used once per query. It turns out
that get_rte_attribute_type() is typically never used at all on VALUES
RTEs, so the inefficiency there is of no great concern.
Report: https://postgr.es/m/20161205143037.4377.60754@wrigleys.postgresql.org
Discussion: https://postgr.es/m/27429.1480968538@sss.pgh.pa.us
array_position and its cousin array_positions were caching the element
type equality function's FmgrInfo without being careful enough to put it
in a long-lived context. This is obviously broken but it didn't matter
in most cases; only when using arrays of records (involving record_eq)
it becomes a problem. The fix is to ensure that the type's equality
function's FmgrInfo is cached in the array_position's flinfo->fn_mcxt
rather than the current memory context.
Apart from record types, the only other case that seems complex enough
to possibly cause the same problem are range types. I didn't find a way
to reproduce the problem with those, so I only include the test case
submitted with the bug report as regression test.
Bug report and patch: Junseok Yang
Discussion: https://postgr.es/m/CAE+byMupUURYiZ6bKYgMZb9pgV1CYAijJGqWj-90W=nS7uEOeA@mail.gmail.com
Backpatch to 9.5, where array_position appeared.
When dropping a foreign key constraint with ALTER TABLE DROP CONSTRAINT,
we refuse the drop if there are any pending trigger events on the named
table; this ensures that we won't remove the pg_trigger row that will be
consulted by those events. But we should make the same check for the
referenced relation, else we might remove a due-to-be-referenced pg_trigger
row for that relation too, resulting in "could not find trigger NNN" or
"relation NNN has no triggers" errors at commit. Per bug #14431 from
Benjie Gillam. Back-patch to all supported branches.
Report: <20161124114911.6530.31200@wrigleys.postgresql.org>
Previously, requesting commit timestamp for transactions
FrozenTransactionId and BootstrapTransactionId resulted in an error.
But since those values can validly appear in committed tuples' Xmin,
this behavior is unhelpful and error prone: each caller would have to
special-case those values before requesting timestamp data for an Xid.
We already have a perfectly good interface for returning "the Xid you
requested is too old for us to have commit TS data for it", so let's use
that instead.
Backpatch to 9.5, where commit timestamps appeared.
Author: Craig Ringer
Discussion: https://www.postgresql.org/message-id/CAMsr+YFM5Q=+ry3mKvWEqRTxrB0iU3qUSRnS28nz6FJYtBwhJg@mail.gmail.com
When rebuilding an existing index, ALTER TABLE correctly kept the
physical file in the same tablespace, but it messed up the pg_class
entry if the index had been in the database's default tablespace
and "default_tablespace" was set to some non-default tablespace.
This led to an inaccessible index.
Fix by fixing pg_get_indexdef_string() to always include a tablespace
clause, whether or not the index is in the default tablespace. The
previous behavior was installed in commit 537e92e41, and I think it just
wasn't thought through very clearly; certainly the possible effect of
default_tablespace wasn't considered. There's some risk in changing the
behavior of this function, but there are no other call sites in the core
code. Even if it's being used by some third party extension, it's fairly
hard to envision a usage that is okay with a tablespace clause being
appended some of the time but can't handle it being appended all the time.
Back-patch to all supported versions.
Code fix by me, investigation and test cases by Michael Paquier.
Discussion: <1479294998857-5930602.post@n3.nabble.com>
Because we use transformTargetList() for UPDATE as well as SELECT
tlists, the code accidentally tried to expand a "*" reference into
several columns. This is nonsensical, because the UPDATE syntax
provides exactly one target column to put the value into. The
immediate result was that transformUpdateTargetList() got confused
and reported "UPDATE target count mismatch --- internal error".
It seems better to treat such a reference as a plain whole-row
variable, as it would be in other contexts. (This could produce
useful results when the target column is of composite type.)
Fix by tweaking transformTargetList() to perform *-expansion only
conditionally, depending on its exprKind parameter.
Back-patch to 9.3. The problem exists further back, but a fix would be
much more invasive before that, because transformTargetList() wasn't
told what kind of list it was working on. Doesn't seem worth the
trouble given the lack of field reports. (I only noticed it because
I was checking the code while trying to improve the documentation about
how we handle "foo.*".)
Discussion: <4308.1479595330@sss.pgh.pa.us>
We really ought to make StdRdOptions and the other decoded forms of
reloptions self-identifying, but for the moment, assume that only plain
relations could possibly be user_catalog_tables. Fixes problem with bogus
"ON CONFLICT is not supported on table ... used as a catalog table" error
when target is a view with cascade option.
Discussion: <26681.1477940227@sss.pgh.pa.us>
We must do this in case the expression evaluation results in calling
another plpgsql function (or, really, anything using SPI). I missed
the need for this when I converted exec_cast_value() from doing a
simple InputFunctionCall() to doing ExecEvalExpr() in commit 1345cc67b.
There is a SPI_push_conditional in InputFunctionCall(), so that there
was no bug before that.
Per bug #14414 from Marcos Castedo. Add a regression test based on his
example, which was that a plpgsql function in a domain check constraint
didn't work when assigning to a domain-type variable within plpgsql.
Report: <20161106010947.1387.66380@wrigleys.postgresql.org>
QTNTernary() contains logic to flatten, eg, '(a & b) & c' into 'a & b & c',
which is all well and good, but it tries to do that to NOT nodes as well,
so that '!!a' gets changed to '!a'. Explicitly restrict the conversion to
be done only on AND and OR nodes, and add a test case illustrating the bug.
In passing, provide some comments for the sadly naked functions in
tsquery_util.c, and simplify some baroque logic in QTNFree(), which
I think may have been leaking some items it intended to free.
Noted while investigating a complaint from Andreas Seltenreich.
Back-patch to all supported versions.
The code to change the deferrability properties of a foreign-key constraint
updated all the associated triggers to match; but a moment's examination of
the code that creates those triggers in the first place shows that only
some of them should track the constraint's deferrability properties. This
leads to odd failures in subsequent exercise of the foreign key, as the
triggers are fired at the wrong times. Fix that, and add a regression test
comparing the trigger properties produced by ALTER CONSTRAINT with those
you get by creating the constraint as-intended to begin with.
Per report from James Parks. Back-patch to 9.4 where this ALTER
functionality was introduced.
Report: <CAJ3Xv+jzJ8iNNUcp4RKW8b6Qp1xVAxHwSXVpjBNygjKxcVuE9w@mail.gmail.com>
A transaction that conflicts against itself, for example
INSERT INTO t(pk) VALUES (1),(1) ON CONFLICT DO NOTHING;
should behave the same regardless of isolation level. It certainly
shouldn't throw a serialization error, as retrying will not help.
We got this wrong due to the ON CONFLICT logic not considering the case,
as reported by Jason Dusek.
Core of this patch is by Peter Geoghegan (based on an earlier patch by
Thomas Munro), though I didn't take his proposed code refactoring for fear
that it might have unexpected side-effects. Test cases by Thomas Munro
and myself.
Report: <CAO3NbwOycQjt2Oqy2VW-eLTq2M5uGMyHnGm=RNga4mjqcYD7gQ@mail.gmail.com>
Related-Discussion: <57EE93C8.8080504@postgrespro.ru>
Despite the argumentation I wrote in commit 7a2fe85b0, it's unsafe to do
this, because in corner cases it's possible for HeapTupleSatisfiesSelf
to try to set hint bits on the target tuple; and at least since 8.2 we
have required the buffer content lock to be held while setting hint bits.
The added regression test exercises one such corner case. Unpatched, it
causes an assertion failure in assert-enabled builds, or otherwise would
cause a hint bit change in a buffer we don't hold lock on, which given
the right race condition could result in checksum failures or other data
consistency problems. The odds of a problem in the field are probably
pretty small, but nonetheless back-patch to all supported branches.
Report: <19391.1477244876@sss.pgh.pa.us>
It's not good for an inherited child constraint to be marked connoinherit;
that would result in the constraint not propagating to grandchild tables,
if any are created later. The code mostly prevented this from happening
but there was one case that was missed.
This is somewhat related to commit e55a946a8, which also tightened checks
on constraint merging. Hence, back-patch to 9.2 like that one. This isn't
so much because there's a concrete feature-related reason to stop there,
as to avoid having more distinct behaviors than we have to in this area.
Amit Langote
Discussion: <b28ee774-7009-313d-dd55-5bdd81242c41@lab.ntt.co.jp>
Historically, we've allowed users to add a CHECK constraint to a child
table and then add an identical CHECK constraint to the parent. This
results in "merging" the two constraints so that the pre-existing
child constraint ends up with both conislocal = true and coninhcount > 0.
However, if you tried to do it in the other order, you got a duplicate
constraint error. This is problematic for pg_dump, which needs to issue
separated ADD CONSTRAINT commands in some cases, but has no good way to
ensure that the constraints will be added in the required order.
And it's more than a bit arbitrary, too. The goal of complaining about
duplicated ADD CONSTRAINT commands can be served if we reject the case of
adding a constraint when the existing one already has conislocal = true;
but if it has conislocal = false, let's just make the ADD CONSTRAINT set
conislocal = true. In this way, either order of adding the constraints
has the same end result.
Another problem was that the code allowed creation of a parent constraint
marked convalidated that is merged with a child constraint that is
!convalidated. In this case, an inheritance scan of the parent table could
emit some rows violating the constraint condition, which would be an
unexpected result given the marking of the parent constraint as validated.
Hence, forbid merging of constraints in this case. (Note: valid child and
not-valid parent seems fine, so continue to allow that.)
Per report from Benedikt Grundmann. Back-patch to 9.2 where we introduced
possibly-not-valid check constraints. The second bug obviously doesn't
apply before that, and I think the first doesn't either, because pg_dump
only gets into this situation when dealing with not-valid constraints.
Report: <CADbMkNPT-Jz5PRSQ4RbUASYAjocV_KHUWapR%2Bg8fNvhUAyRpxA%40mail.gmail.com>
Discussion: <22108.1475874586@sss.pgh.pa.us>
Back-patch commit 0dba54f166 into the older
branches. This test is almost as much of a patching hazard there as it is
in HEAD, and it has no more reason to be needed than it does in HEAD.
I went back as far as 9.2; I judged 9.1 not worth the trouble since
it's on the verge of being EOL'd.
There were several issues with the old coding:
1. There was a race condition, if two threads opened a connection at the
same time. We used a mutex around SSL_CTX_* calls, but that was not
enough, e.g. if one thread SSL_CTX_load_verify_locations() with one
path, and another thread set it with a different path, before the first
thread got to establish the connection.
2. Opening two different connections, with different sslrootcert settings,
seemed to fail outright with "SSL error: block type is not 01". Not sure
why.
3. We created the SSL object, before calling SSL_CTX_load_verify_locations
and SSL_CTX_use_certificate_chain_file on the SSL context. That was
wrong, because the options set on the SSL context are propagated to the
SSL object, when the SSL object is created. If they are set after the
SSL object has already been created, they won't take effect until the
next connection. (This is bug #14329)
At least some of these could've been fixed while still using a shared
context, but it would've been more complicated and error-prone. To keep
things simple, let's just use a separate SSL context for each connection,
and accept the overhead.
Backpatch to all supported versions.
Report, analysis and test case by Kacper Zuk.
Discussion: <20160920101051.1355.79453@wrigleys.postgresql.org>
Attempting to COPY a subset of columns from a table with RLS enabled
would fail due to an invalid query being constructed (using a single
ColumnRef with the list of fields to exact in 'fields', but that's for
the different levels of an indirection for a single column, not for
specifying multiple columns).
Correct by building a ColumnRef and then RestTarget for each column
being requested and then adding those to the targetList for the select
query. Include regression tests to hopefully catch if this is broken
again in the future.
Patch-By: Adam Brightwell
Reviewed-By: Michael Paquier
<sys/select.h> is required by POSIX.1-2001 to get the prototype of
select(2), but nearly no systems enforce that because older standards
let you get away with including some other headers. Recent OpenBSD
hacking has removed that frail touch of friendliness, however, which
broke some compiles; fix all the way back to 9.1 by adding the required
standard. Only vacuumdb.c was reported to fail, but it seems easier to
fix the whole lot in a fell swoop.
Per bug #14334 by Sean Farrell.
When configured with --enable-tap-tests, "make install" will now install
the Perl support files for TAP testing where PGXS will find them.
This allows extensions to rely on $(prove_check) even when being built
out-of-tree. Back-patch to 9.4 where we first started to support TAP
testing, to reduce the number of cases extension makefiles need to
consider.
Craig Ringer
Discussion: <CAMsr+YFXv+2qne6xJW7z_25mYBtktRX5rpkrgrb+DRgQ_FxgHQ@mail.gmail.com>
ExecInitCteScan supposed that it didn't have to do anything to the extra
tuplestore read pointer it gets from tuplestore_alloc_read_pointer.
However, it needs this read pointer to be positioned at the start of the
tuplestore, while tuplestore_alloc_read_pointer is actually defined as
cloning the current position of read pointer 0. In normal situations
that accidentally works because we initialize the whole plan tree at once,
before anything gets read. But it fails in an EvalPlanQual recheck, as
illustrated in bug #14328 from Dima Pavlov. To fix, just forcibly rewind
the pointer after tuplestore_alloc_read_pointer. The cost of doing so is
negligible unless the tuplestore is already in TSS_READFILE state, which
wouldn't happen in normal cases. We could consider altering tuplestore's
API to make that case cheaper, but that would make for a more invasive
back-patch and it doesn't seem worth it.
This has been broken probably for as long as we've had CTEs, so back-patch
to all supported branches.
Discussion: <32468.1474548308@sss.pgh.pa.us>
Changes needed to build at all:
- Check for SSL_new in configure, now that SSL_library_init is a macro.
- Do not access struct members directly. This includes some new code in
pgcrypto, to use the resource owner mechanism to ensure that we don't
leak OpenSSL handles, now that we can't embed them in other structs
anymore.
- RAND_SSLeay() -> RAND_OpenSSL()
Changes that were needed to silence deprecation warnings, but were not
strictly necessary:
- RAND_pseudo_bytes() -> RAND_bytes().
- SSL_library_init() and OpenSSL_config() -> OPENSSL_init_ssl()
- ASN1_STRING_data() -> ASN1_STRING_get0_data()
- DH_generate_parameters() -> DH_generate_parameters()
- Locking callbacks are not needed with OpenSSL 1.1.0 anymore. (Good
riddance!)
Also change references to SSLEAY_VERSION_NUMBER with OPENSSL_VERSION_NUMBER,
for the sake of consistency. OPENSSL_VERSION_NUMBER has existed since time
immemorial.
Fix SSL test suite to work with OpenSSL 1.1.0. CA certificates must have
the "CA:true" basic constraint extension now, or OpenSSL will refuse them.
Regenerate the test certificates with that. The "openssl" binary, used to
generate the certificates, is also now more picky, and throws an error
if an X509 extension is specified in "req_extensions", but that section
is empty.
Backpatch to 9.5 and 9.6, per popular demand. The file structure was
somewhat different in earlier branches, so I didn't bother to go further
than that. In back-branches, we still support OpenSSL 0.9.7 and above.
OpenSSL 0.9.6 should still work too, but I didn't test it. In master, we
only support 0.9.8 and above.
Patch by Andreas Karlsson, with additional changes by me.
Discussion: <20160627151604.GD1051@msg.df7cb.de>
When heap_lock_tuple decides to follow the update chain, it tried to
also lock any version of the tuple that was created by an update that
was subsequently rolled back. This is pointless, since for all intents
and purposes that tuple exists no more; and moreover it causes
misbehavior, as reported independently by Marko Tiikkaja and Marti
Raudsepp: some SELECT FOR UPDATE/SHARE queries may fail to return
the tuples, and assertion-enabled builds crash.
Fix by having heap_lock_updated_tuple test the xmin and return success
immediately if the tuple was created by an aborted transaction.
The condition where tuples become invisible occurs when an updated tuple
chain is followed by heap_lock_updated_tuple, which reports the problem
as HeapTupleSelfUpdated to its caller heap_lock_tuple, which in turn
propagates that code outwards possibly leading the calling code
(ExecLockRows) to believe that the tuple exists no longer.
Backpatch to 9.3. Only on 9.5 and newer this leads to a visible
failure, because of commit 27846f02c176; before that, heap_lock_tuple
skips the whole dance when the tuple is already locked by the same
transaction, because of the ancient HeapTupleSatisfiesUpdate behavior.
Still, the buggy condition may also exist in more convoluted scenarios
involving concurrent transactions, so it seems safer to fix the bug in
the old branches too.
Discussion:
https://www.postgresql.org/message-id/CABRT9RC81YUf1=jsmWopcKJEro=VoeG2ou6sPwyOUTx_qteRsg@mail.gmail.comhttps://www.postgresql.org/message-id/48d3eade-98d3-8b9a-477e-1a8dc32a724d@joh.to
After further reflection about the mess cleaned up in commit 39b691f25,
I decided the main bit of test coverage that was still missing was to
check that the non-default abbreviation-set files we supply are usable.
Add that.
Back-patch to supported branches, just because it seems like a good
idea to keep this all in sync.
Previously, we threw an error if a dynamic timezone abbreviation did not
match any abbreviation recorded in the referenced IANA time zone entry.
That seemed like a good consistency check at the time, but it turns out
that a number of the abbreviations in the IANA database are things that
Olson and crew made up out of whole cloth. Their current policy is to
remove such names in favor of using simple numeric offsets. Perhaps
unsurprisingly, a lot of these made-up abbreviations have varied in meaning
over time, which meant that our commit b2cbced9e and later changes made
them into dynamic abbreviations. So with newer IANA database versions
that don't mention these abbreviations at all, we fail, as reported in bug
#14307 from Neil Anderson. It's worse than just a few unused-in-the-wild
abbreviations not working, because the pg_timezone_abbrevs view stops
working altogether (since its underlying function tries to compute the
whole view result in one call).
We considered deleting these abbreviations from our abbreviations list, but
the problem with that is that we can't stay ahead of possible future IANA
changes. Instead, let's leave the abbreviations list alone, and treat any
"orphaned" dynamic abbreviation as just meaning the referenced time zone.
It will behave a bit differently than it used to, in that you can't any
longer override the zone's standard vs. daylight rule by using the "wrong"
abbreviation of a pair, but that's better than failing entirely. (Also,
this solution can be interpreted as adding a small new feature, which is
that any abbreviation a user wants can be defined as referencing a time
zone name.)
Back-patch to all supported branches, since this problem affects all
of them when using tzdata 2016f or newer.
Report: <20160902031551.15674.67337@wrigleys.postgresql.org>
Discussion: <6189.1472820913@sss.pgh.pa.us>
Commit f0c7b789a added a test case in case.sql that creates and then drops
both an '=' operator and the type it's for. Given the right timing, that
can cause a "cache lookup failed for type" failure in concurrent sessions,
which see the '=' operator as a potential match for '=' in a query, but
then the type is gone by the time they inquire into its properties.
It might be nice to make that behavior more robust someday, but as a
back-patchable solution, adjust the new test case so that the operator
is never visible to other sessions. Like the previous commit, back-patch
to all supported branches.
Discussion: <5983.1471371667@sss.pgh.pa.us>
ExecReScanAgg's check for whether it could re-use a previously calculated
hashtable neglected the possibility that the Agg node might reference
PARAM_EXEC Params that are not referenced by its input plan node. That's
okay if the Params are in upper tlist or qual expressions; but if one
appears in aggregate input expressions, then the hashtable contents need
to be recomputed when the Param's value changes.
To avoid unnecessary performance degradation in the case of a Param that
isn't within an aggregate input, add logic to the planner to determine
which Params are within aggregate inputs. This requires a new field in
struct Agg, but fortunately we never write plans to disk, so this isn't
an initdb-forcing change.
Per report from Jeevan Chalke. This has been broken since forever,
so back-patch to all supported branches.
Andrew Gierth, with minor adjustments by me
Report: <CAM2+6=VY8ykfLT5Q8vb9B6EbeBk-NGuLbT6seaQ+Fq4zXvrDcA@mail.gmail.com>
