The original coding required that PQpipelineSync had been called before
the first call to PQgetResult, and failure to do that would result in an
unexpected NULL result being returned. Fix by setting the right state
when a query is sent, rather than leaving it unchanged and having
PQpipelineSync apply the necessary state change.
A new test case to verify the behavior is added, which relies on the new
PQsendFlushRequest() function added by commit a7192326c7.
Backpatch to 14, where pipeline mode was added.
Reported-by: Boris Kolpackov <boris@codesynthesis.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/boris.20210616110321@codesynthesis.com
Commit efbfb6424 added logic for reporting exactly which existing
partition conflicts when complaining that a new hash partition's
modulus isn't compatible with the existing ones. However, it
misunderstood the partitioning data structure, and would select
the wrong partition in some cases, or crash outright due to fetching
a bogus table OID in other cases.
Per bug #17076 from Alexander Lakhin. Fix by Amit Langote;
some further work on the code comments by me.
Discussion: https://postgr.es/m/17076-89a16ae835d329b9@postgresql.org
83158f7 has improved index_set_state_flags() so as it is possible to use
transactional updates when updating pg_index state flags, but there was
not really a test case which stressed directly the possibility it fixed.
This commit adds such a test, using a predicate that looks valid in
appearance but calls a stable function.
Author: Andrey Lepikhov
Discussion: https://postgr.es/m/9b905019-5297-7372-0ad2-e1a4bb66a719@postgrespro.ru
Backpatch-through: 9.6
specscanner.l leaked a kilobyte of memory per token of the spec file.
Apparently somebody thought that the introductory code block would be
executed once; but it's once per yylex() call.
A couple of functions in isolationtester.c leaked small amounts of
memory due to not bothering to free one-time allocations. Might
as well improve these so that valgrind gives this program a clean
bill of health. Also get rid of an ugly static variable.
Coverity complained about one of the one-time leaks, which led me
to try valgrind'ing isolationtester, which led to discovery of the
larger leak.
ALTER SUBSCRIPTION DROP PUBLICATION does not actually support
copy_data option, so remove it from tab completion.
Also, reword the error message that is thrown when all the
publications from a subscription are specified to be dropped.
Also, made few doc and cosmetic adjustments.
Author: Vignesh C <vignesh21@gmail.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddy@enterprisedb.com>
Reviewed-by: Japin Li <japinli@hotmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CALDaNm21RwsDzs4xj14ApteAF7auyyomHNnp+NEL-sH8m-jMvQ@mail.gmail.com
For no obvious reason, isolationtester has always insisted that
session and step names be written with double quotes. This is
fairly tedious and does little for test readability, especially
since the names that people actually choose almost always look
like normal identifiers. Hence, let's tweak the lexer to allow
SQL-like identifiers not only double-quoted strings.
(They're SQL-like, not exactly SQL, because I didn't add any
case-folding logic. Also there's no provision for U&"..." names,
not that anyone's likely to care.)
There is one incompatibility introduced by this change: if you write
"foo""bar" with no space, that used to be taken as two identifiers,
but now it's just one identifier with an embedded quote mark.
I converted all the src/test/isolation/ specfiles to remove
unnecessary double quotes, but stopped there because my
eyes were glazing over already.
Like 741d7f104, back-patch to all supported branches, so that this
isn't a stumbling block for back-patching isolation test changes.
Discussion: https://postgr.es/m/759113.1623861959@sss.pgh.pa.us
Previously, isolationtester displayed SQL query results using some
ad-hoc code that clearly hadn't had much effort expended on it.
Field values longer than 14 characters weren't separated from
the next field, and usually caused misalignment of the columns
too. Also there was no visual separation of a query's result
from subsequent isolationtester output. This made test result
files confusing and hard to read.
To improve matters, let's use libpq's PQprint() function. Although
that's long since unused by psql, it's still plenty good enough
for the purpose here.
Like 741d7f104, back-patch to all supported branches, so that this
isn't a stumbling block for back-patching isolation test changes.
Discussion: https://postgr.es/m/582362.1623798221@sss.pgh.pa.us
The code to signal a running walsender when its reserved WAL size grows
too large is completely uncovered before this commit; this adds coverage
for that case.
This test involves sending SIGSTOP to walsender and walreceiver, then
advancing enough WAL for a checkpoint to trigger, then sending SIGCONT.
There's no precedent for STOP signalling in Perl tests, and my reading
of relevant manpages says it's likely to fail on Windows. Because of
this, this test is always skipped on that platform.
This version fixes a couple of rarely hit race conditions in the
previous attempt 09126984a263; most notably, both LOG string searches
are loops, not just the second one; we acquire the start-of-log position
before STOP-signalling; and reference the correct process name in the
test description. All per Tom Lane.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/202106102202.mjw4huiix7lo@alvherre.pgsql
We've long contended with isolation test results that aren't entirely
stable. Some test scripts insert long delays to try to force stable
results, which is not terribly desirable; but other erratic failure
modes remain, causing unrepeatable buildfarm failures. I've spent a
fair amount of time trying to solve this by improving the server-side
support code, without much success: that way is fundamentally unable
to cope with diffs that stem from chance ordering of arrival of
messages from different server processes.
We can improve matters on the client side, however, by annotating
the test scripts themselves to show the desired reporting order
of events that might occur in different orders. This patch adds
three types of annotations to deal with (a) test steps that might or
might not complete their waits before the isolationtester can see them
waiting; (b) test steps in different sessions that can legitimately
complete in either order; and (c) NOTIFY messages that might arrive
before or after the completion of a step in another session. We might
need more annotation types later, but this seems to be enough to deal
with the instabilities we've seen in the buildfarm. It also lets us
get rid of all the long delays that were previously used, cutting more
than a minute off the runtime of the isolation tests.
Back-patch to all supported branches, because the buildfarm
instabilities affect all the branches, and because it seems desirable
to keep isolationtester's capabilities the same across all branches
to simplify possible future back-patching of tests.
Discussion: https://postgr.es/m/327948.1623725828@sss.pgh.pa.us
This reverts commit 09126984a263; the test case added there failed once
in circumstances that remain mysterious. It seems better to remove the
test for now so that 14beta2 doesn't have random failures built in.
Generalize the INDEX_CLEANUP VACUUM parameter (and the corresponding
reloption): make it into a ternary style boolean parameter. It now
exposes a third option, "auto". The "auto" option (which is now the
default) enables the "bypass index vacuuming" optimization added by
commit 1e55e7d1.
"VACUUM (INDEX_CLEANUP TRUE)" is redefined to once again make VACUUM
simply do any required index vacuuming, regardless of how few dead
tuples are encountered during the first scan of the target heap relation
(unless there are exactly zero). This gives users a way of opting out
of the "bypass index vacuuming" optimization, if for whatever reason
that proves necessary. It is also expected to be used by PostgreSQL
developers as a testing option from time to time.
"VACUUM (INDEX_CLEANUP FALSE)" does the same thing as it always has: it
forcibly disables both index vacuuming and index cleanup. It's not
expected to be used much in PostgreSQL 14. The failsafe mechanism added
by commit 1e55e7d1 addresses the same problem in a simpler way.
INDEX_CLEANUP can now be thought of as a testing and compatibility
option.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-By: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/CAH2-WznrBoCST4_Gxh_G9hA8NzGUbeBGnOUC8FcXcrhqsv6OHQ@mail.gmail.com
The code to signal a running walsender when its reserved WAL size grows
too large is completely uncovered before this commit; this adds coverage
for that case.
This test involves sending SIGSTOP to walsender and walreceiver and
running a checkpoint while advancing WAL, then sending SIGCONT. There's
no precedent for this coding in Perl tests, and my reading of relevant
manpages says it's likely to fail on Windows. Because of this, this
test is always skipped on that platform.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/202106102202.mjw4huiix7lo@alvherre.pgsql
Ordinarily, a pg_policy.polroles array wouldn't list the same role
more than once; but CREATE POLICY does not prevent that. If we
perform DROP OWNED BY on a role that is listed more than once,
RemoveRoleFromObjectPolicy either suffered an assertion failure
or encountered a tuple-updated-by-self error. Rewrite it to cope
correctly with duplicate entries, and add a CommandCounterIncrement
call to prevent the other problem.
Per discussion, there's other cleanup that ought to happen here,
but this seems like the minimum essential fix.
Per bug #17062 from Alexander Lakhin. It's been broken all along,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/17062-11f471ae3199ca23@postgresql.org
The fast default code added in Release 11 omitted to check that the
table a fast default was being added to was a plain table. Thus one
could be added to a foreign table, which predicably blows up. Here we
perform that check.
In addition, on the back branches, since some of these might have
escaped into the wild, if we encounter a missing value for
an attribute of something other than a plain table we ignore it.
Fixes bug #17056
Backpatch to release 11,
Reviewed by: Andres Freund, Álvaro Herrera and Tom Lane
aborted-keyrevoke_2.out was apparently needed when it was added (in
commit 0ac5ad513) to handle the case of serializable transaction mode.
However, the output in serializable mode actually matches the regular
aborted-keyrevoke.out file, and AFAICT has done so for a long time.
There's no need to keep dragging this variant along.
TestLib::perl2host can take a file argument as well as a directory
argument, so that code becomes substantially simpler. Also add comments
on why we're using forward slashes, and why we're setting
PERL_BADLANG=0.
Discussion: https://postgr.es/m/e9947bcd-20ee-027c-f0fe-01f736b7e345@dunslane.net
It has been spotted that multiranges lack of ability to decompose them into
individual ranges. Subscription and proper expanded object representation
require substantial work, and it's too late for v14. This commit
provides the implementation of unnest(multirange) and cast multirange as
an array of ranges, which is quite trivial.
unnest(multirange) is defined as a polymorphic procedure. The catalog
description of the cast underlying procedure is duplicated for each multirange
type because we don't have anyrangearray polymorphic type to use here.
Catversion is bumped.
Reported-by: Jonathan S. Katz
Discussion: https://postgr.es/m/flat/60258efe-bd7e-4886-82e1-196e0cac5433%40postgresql.org
Author: Alexander Korotkov
Reviewed-by: Justin Pryzby, Jonathan S. Katz, Zhihong Yu
This should have been updated in d2d8a229b, but it was overlooked.
According to 31a877f18 which added it, this file is meant to show the
results you get under default_transaction_isolation = serializable.
We've largely lost track of that goal in other isolation tests, but
as long as we've got this one, it should be right.
Noted while fooling about with the isolationtester.
An object found as dropped when digging into the list of objects
returned by pg_event_trigger_ddl_commands() could cause a cache lookup
error, as the calls grabbing for the object address and the type name
would fail if the object was missing.
Those lookup errors could be seen with combinations of ALTER TABLE
sub-commands involving identity columns. The lookup logic is changed in
this code path to get a behavior similar to any other SQL-callable
function by ignoring objects that are not found, taking advantage of
2a10fdc. The back-branches are not changed, as they require this commit
that is too invasive for stable branches.
While on it, add test cases to exercise event triggers with identity
columns, and stress more cases with the event ddl_command_end for
relations.
Author: Sven Klemm, Aleksander Alekseev, Michael Paquier
Discussion: https://postgr.es/m/CAMCrgp2R1cEXU53iYKtW6yVEp2_yKUz+z=3-CTrYpPP+xryRtg@mail.gmail.com
The extra checks added by the recompression of toast data introduced in
bbe0a81 is proving to have a performance impact on VACUUM or CLUSTER
even if no recompression is done. This is more noticeable with more
toastable columns that contain non-NULL values.
Improvements could be done to make those extra checks less expensive,
but that's not material for 14 at this stage, and we are not sure either
if the code path of VACUUM FULL/CLUSTER is adapted for this job.
Per discussion with several people, including Andres Freund, Robert
Haas, Álvaro Herrera, Tom Lane and myself.
Discussion: https://postgr.es/m/20210527003144.xxqppojoiwurc2iz@alap3.anarazel.de
Translate path slashes on target directory path. This was confusing old
branches, but is applied to all branches for the sake of uniformity.
Perl is perfectly able to understand paths with forward slashes.
Along the way, restore the previous archive_wait query, for the sake of
uniformity with other tests, per gripe from Tom Lane.
This is similar to the work done in 8279f68 for TestLib.pm, where
environment variables set may cause unwanted failures if using a
temporary installation with pg_regress. The list of variables reset is
adjusted in each stable branch depending on what is supported.
Comments are added to remember that the lists in TestLib.pm and
pg_regress.c had better be kept in sync.
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/YMNR9GYDn+fHlMta@paquier.xyz
Backpatch-through: 9.6
Several TAP tests use poll_query_until() to wait for the postmaster
to restart. They were checking to see if a trivial query
(e.g. "SELECT 1") succeeds. However, that's problematic in the wake
of commit 11e9caff8, because now that we feed said query to psql
via stdin, we risk IPC::Run whining about a SIGPIPE failure if psql
quits before reading the query. Hence, we can't use a nonempty
query in cases where we need to wait for connection failures to
stop happening.
Per the precedent of commits c757a3da0 and 6d41dd045, we can pass
"undef" as the query in such cases to ensure that IPC::Run has
nothing to write. However, then we have to say that the expected
output is empty, and this exposes a deficiency in poll_query_until:
if psql fails altogether and returns empty stdout, poll_query_until
will treat that as a success! That's because, contrary to its
documentation, it makes no actual check for psql failure, looking
neither at the exit status nor at stderr.
To fix that, adjust poll_query_until to insist on empty stderr as
well as a stdout match. (I experimented with checking exit status
instead, but it seems that psql often does exit(1) in cases that we
need to consider successes. That might be something to fix someday,
but it would be a non-back-patchable behavior change.)
Back-patch to v10. The test cases needing this exist only as far
back as v11, but it seems wise to keep poll_query_until's behavior
the same in v10, in case we back-patch another such test case in
future. (9.6 does not currently need this change, because in that
branch poll_query_until can't be told to accept empty stdout as
a success case.)
Per assorted buildfarm failures, mostly on hoverfly.
Discussion: https://postgr.es/m/CAA4eK1+zM6L4QSA1XMvXY_qqWwdUmqkOS1+hWvL8QcYEBGA1Uw@mail.gmail.com
Commit caba8f0d43 wasn't quite right for msys, as demonstrated by
several buildfarm animals, including jacana and fairywren. We need to
use the msys perl in the archive command, but call it in such a way that
Windows will understand the path. Furthermore, inside the copy script we
need to convert a Windows path to an msys path.
ab55d74 has introduced some tests with rows found as missing in logical
replication subscriptions for partitioned tables, relying on a logic
with a lookup of the logs generated, scanning the whole file. This
commit makes the logic more precise, by scanning the logs only from the
position before the key queries are run to the position where we check
for the logs. This will reduce the risk of issues with log patterns
overlapping with each other if those tests get more complicated in the
future.
Per discussion with Tom Lane.
Discussion: https://postgr.es/m/YMP+Gx2S8meYYHW4@paquier.xyz
Backpatch-through: 13
apply_handle_tuple_routing(), having detected and reported that
the tuple it needed to update didn't exist, tried to update that
tuple anyway, leading to a null-pointer dereference.
logicalrep_partition_open() failed to ensure that the
LogicalRepPartMapEntry it built for a partition was fully
independent of that for the partition root, leading to
trouble if the root entry was later freed or rebuilt.
Meanwhile, on the publisher's side, pgoutput_change() sometimes
attempted to apply execute_attr_map_tuple() to a NULL tuple.
The first of these was reported by Sergey Bernikov in bug #17055;
I found the other two while developing some test cases for this
sadly under-tested code.
Diagnosis and patch for the first issue by Amit Langote; patches
for the others by me; new test cases by me. Back-patch to v13
where this logic came in.
Discussion: https://postgr.es/m/17055-9ba800ec8522668b@postgresql.org
Commit acb7e4eb6b added a new implementation for PQsendQuery so that
it works in pipeline mode (by using extended query protocol), but it
behaves differently from the 'Q' message (in simple query protocol) used
by regular implementation: the new one doesn't close the unnamed portal.
Change the new code to have identical behavior to the old.
Reported-by: Yura Sokolov <y.sokolov@postgrespro.ru>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/202106072107.d4i55hdscxqj@alvherre.pgsql
We have a dozen PQset*() functions. PQresultSetInstanceData() and this
were the libpq setter functions having a different word order. Adopt
the majority word order.
Reviewed by Alvaro Herrera and Robert Haas, though this choice of name
was not unanimous.
Discussion: https://postgr.es/m/20210605060555.GA216695@rfd.leadboat.com
Commit 2453ea142 redefined pg_proc.proargtypes to include the types of
OUT parameters, for procedures only. While that had some advantages
for implementing the SQL-spec behavior of DROP PROCEDURE, it was pretty
disastrous from a number of other perspectives. Notably, since the
primary key of pg_proc is name + proargtypes, this made it possible to
have multiple procedures with identical names + input arguments and
differing output argument types. That would make it impossible to call
any one of the procedures by writing just NULL (or "?", or any other
data-type-free notation) for the output argument(s). The change also
seems likely to cause grave confusion for client applications that
examine pg_proc and expect the traditional definition of proargtypes.
Hence, revert the definition of proargtypes to what it was, and
undo a number of complications that had been added to support that.
To support the SQL-spec behavior of DROP PROCEDURE, when there are
no argmode markers in the command's parameter list, we perform the
lookup both ways (that is, matching against both proargtypes and
proallargtypes), succeeding if we get just one unique match.
In principle this could result in ambiguous-function failures
that would not happen when using only one of the two rules.
However, overloading of procedure names is thought to be a pretty
rare usage, so this shouldn't cause many problems in practice.
Postgres-specific code such as pg_dump can defend against any
possibility of such failures by being careful to specify argmodes
for all procedure arguments.
This also fixes a few other bugs in the area of CALL statements
with named parameters, and improves the documentation a little.
catversion bump forced because the representation of procedures
with OUT arguments changes.
Discussion: https://postgr.es/m/3742981.1621533210@sss.pgh.pa.us
This only happens if (1) the new standby has no WAL available locally,
(2) the new standby is starting from the old timeline, (3) the promotion
happened in the WAL segment from which the new standby is starting,
(4) the timeline history file for the new timeline is available from
the archive but the WAL files for are not (i.e. this is a race),
(5) the WAL files for the new timeline are available via streaming,
and (6) recovery_target_timeline='latest'.
Commit ee994272ca introduced this
logic and was an improvement over the previous code, but it mishandled
this case. If recovery_target_timeline='latest' and restore_command is
set, validateRecoveryParameters() can change recoveryTargetTLI to be
different from receiveTLI. If streaming is then tried afterward,
expectedTLEs gets initialized with the history of the wrong timeline.
It's supposed to be a list of entries explaining how to get to the
target timeline, but in this case it ends up with a list of entries
explaining how to get to the new standby's original timeline, which
isn't right.
Dilip Kumar and Robert Haas, reviewed by Kyotaro Horiguchi.
Discussion: http://postgr.es/m/CAFiTN-sE-jr=LB8jQuxeqikd-Ux+jHiXyh4YDiZMPedgQKup0g@mail.gmail.com
gram.y should discard NULL pointers (empty statements) when
assembling a routine_body_stmt_list, as it does for other
sorts of statement lists.
Julien Rouhaud and Tom Lane, per report from Noah Misch.
Discussion: https://postgr.es/m/20210606044418.GA297923@rfd.leadboat.com
When run on a server using default_toast_compression set to LZ4, this
test would fail because of a consistency issue with the order of the
tuples treated. LZ4 causes one tuple to be stored inline instead of
getting externalized. As the goal of this test is to check after data
stored externally, stick to pglz as the compression algorithm used, so
as all data of this test is stored the way it should.
Analyzed-by: Dilip Kumar
Discussion: https://postgr.es/m/YLrDWxJgM8WWMoCg@paquier.xyz
The Msys shell mangles certain patterns in its command line, so avoid
handing arbitrary SQL to psql on the command line and instead use
IPC::Run's redirection facility for stdin. This pattern is already
mostly whats used, but query_poll_until() was not doing the right thing.
Problem discovered on the buildfarm when a new TAP test failed on msys.
Various environment variables were not getting reset in the TAP tests,
which would cause failures depending on the tests or the environment
variables involved. For example, PGSSL{MAX,MIN}PROTOCOLVERSION could
cause failures in the SSL tests. Even worse, a junk value of
PGCLIENTENCODING makes a server startup fail. The list of variables
reset is adjusted in each stable branch depending on what is supported.
While on it, simplify a bit the code per a suggestion from Andrew
Dunstan, using a list of variables instead of doing single deletions.
Reviewed-by: Andrew Dunstan, Daniel Gustafsson
Discussion: https://postgr.es/m/YLbjjRpucIeZ78VQ@paquier.xyz
Backpatch-through: 9.6
Previously there was no regression test for recovery pause feature.
This commit adds the test that checks
- recovery can be paused or resumed expectedly
- pg_get_wal_replay_pause_state() reports the correct pause state
- the paused state ends and promotion continues if a promotion
is triggered while recovery is paused
Suggested-by: Michael Paquier
Author: Fujii Masao
Reviewed-by: Kyotaro Horiguchi, Dilip Kumar
Discussion: https://postgr.es/m/YKNirzqM1HYyk5h4@paquier.xyz
This case should be disallowed, just as FOR UPDATE with a plain
GROUP BY is disallowed; FOR UPDATE only makes sense when each row
of the query result can be identified with a single table row.
However, we missed teaching CheckSelectLocking() to check
groupingSets as well as groupClause, so that it would allow
degenerate grouping sets. That resulted in a bad plan and
a null-pointer dereference in the executor.
Looking around for other instances of the same bug, the only one
I found was in examine_simple_variable(). That'd just lead to
silly estimates, but it should be fixed too.
Per private report from Yaoguang Chen.
Back-patch to all supported branches.
Release memory allocated when creating the tuple-conversion map and its
component TupleDescs when its owning sync entry is invalidated.
TupleDescs must also be freed when no map is deemed necessary, to begin
with.
Reported-by: Andres Freund
Author: Amit Langote
Reviewed-by: Takamichi Osumi, Amit Kapila
Backpatch-through: 13, where it was introduced
Discussion: https://postgr.es/m/MEYP282MB166933B1AB02B4FE56E82453B64D9@MEYP282MB1669.AUSP282.PROD.OUTLOOK.COM
create_projection_plan contains a hidden assumption (here made
explicit by an Assert) that a projection-capable Path will yield a
projection-capable Plan. Unfortunately, that assumption is violated
only a few lines away, by create_projection_plan itself. This means
that two stacked ProjectionPaths can yield an outcome where we try to
jam the upper path's tlist into a non-projection-capable child node,
resulting in an invalid plan.
There isn't any good reason to have stacked ProjectionPaths; indeed the
whole concept is faulty, since the set of Vars/Aggs/etc needed by the
upper one wouldn't necessarily be available in the output of the lower
one, nor could the lower one create such values if they weren't
available from its input. Hence, we can fix this by adjusting
create_projection_path to strip any top-level ProjectionPath from the
subpath it's given. (This amounts to saying "oh, we changed our
minds about what we need to project here".)
The test case added here only fails in v13 and HEAD; before that, we
don't attempt to shove the Sort into the parallel part of the plan,
for reasons that aren't entirely clear to me. However, all the
directly-related code looks generally the same as far back as v11,
where the hazard was introduced (by d7c19e62a). So I've got no faith
that the same type of bug doesn't exist in v11 and v12, given the
right test case. Hence, back-patch the code changes, but not the
irrelevant test case, into those branches.
Per report from Bas Poot.
Discussion: https://postgr.es/m/534fca83789c4a378c7de379e9067d4f@politie.nl
Braces were referred in some error messages as only brackets (not curly
brackets or curly braces), which can be confusing as other types of
brackets could be used.
While on it, add one test to check after the case of junk characters
detected after a right brace.
Author: Kyotaro Horiguchi
Discussion: https://postgr.es/m/20210514.153153.1814935914483287479.horikyota.ntt@gmail.com
