Move applicable code out of RelationBuildDesc(), which nailed relations
bypass. Non-assert builds experienced no known problems. Back-patch to
v13, where commit c6b92041d3 introduced
rd_firstRelfilenodeSubid.
Kyotaro Horiguchi. Reported by Justin Pryzby.
Discussion: https://postgr.es/m/20200907023737.GA7158@telsasoft.com
The SimpleLruTruncate() header comment states the new coding rule. To
achieve this, add locktype "frozenid" and two LWLocks. This closes a
rare opportunity for data loss, which manifested as "apparent
wraparound" or "could not access status of transaction" errors. Data
loss is more likely in pg_multixact, due to released branches' thin
margin between multiStopLimit and multiWrapLimit. If a user's physical
replication primary logged ": apparent wraparound" messages, the user
should rebuild standbys of that primary regardless of symptoms. At less
risk is a cluster having emitted "not accepting commands" errors or
"must be vacuumed" warnings at some point. One can test a cluster for
this data loss by running VACUUM FREEZE in every database. Back-patch
to 9.5 (all supported versions).
Discussion: https://postgr.es/m/20190218073103.GA1434723@rfd.leadboat.com
Up to now, upon receipt of a SIGTERM ("smart shutdown" command), the
postmaster has immediately killed all "optional" background processes,
and subsequently refused to launch new ones while it's waiting for
foreground client processes to exit. No doubt this seemed like an OK
policy at some point; but it's a pretty bad one now, because it makes
for a seriously degraded environment for the remaining clients:
* Parallel queries are killed, and new ones fail to launch. (And our
parallel-query infrastructure utterly fails to deal with the case
in a reasonable way --- it just hangs waiting for workers that are
not going to arrive. There is more work needed in that area IMO.)
* Autovacuum ceases to function. We can tolerate that for awhile,
but if bulk-update queries continue to run in the surviving client
sessions, there's eventually going to be a mess. In the worst case
the system could reach a forced shutdown to prevent XID wraparound.
* The bgwriter and walwriter are also stopped immediately, likely
resulting in performance degradation.
Hence, let's rearrange things so that the only immediate change in
behavior is refusing to let in new normal connections. Once the last
normal connection is gone, shut everything down as though we'd received
a "fast" shutdown. To implement this, remove the PM_WAIT_BACKUP and
PM_WAIT_READONLY states, instead staying in PM_RUN or PM_HOT_STANDBY
while normal connections remain. A subsidiary state variable tracks
whether or not we're letting in new connections in those states.
This also allows having just one copy of the logic for killing child
processes in smart and fast shutdown modes. I moved that logic into
PostmasterStateMachine() by inventing a new state PM_STOP_BACKENDS.
Back-patch to 9.6 where parallel query was added. In principle
this'd be a good idea in 9.5 as well, but the risk/reward ratio
is not as good there, since lack of autovacuum is not a problem
during typical uses of smart shutdown.
Per report from Bharath Rupireddy.
Patch by me, reviewed by Thomas Munro
Discussion: https://postgr.es/m/CALj2ACXAZ5vKxT9P7P89D87i3MDO9bfS+_bjMHgnWJs8uwUOOw@mail.gmail.com
The new hlCover() algorithm that I introduced in commit c9b0c678d
turns out to potentially take O(N^2) or worse time on long documents,
if there are many occurrences of individual query words but few or no
substrings that actually satisfy the query. (One way to hit this
behavior is with a "common_word & rare_word" type of query.) This
seems unavoidable given the original goal of checking every substring
of the document, so we have to back off that idea. Fortunately, it
seems unlikely that anyone would really want headlines spanning all of
a long document, so we can avoid the worse-than-linear behavior by
imposing a maximum length of substring that we'll consider.
For now, just hard-wire that maximum length as a multiple of max_words
times max_fragments. Perhaps at some point somebody will argue for
exposing it as a ts_headline parameter, but I'm hesitant to make such
a feature addition in a back-patched bug fix.
I also noted that the hlFirstIndex() function I'd added in that
commit was unnecessarily stupid: it really only needs to check whether
a HeadlineWordEntry's item pointer is null or not. This wouldn't make
all that much difference in typical cases with queries having just
a few terms, but a cycle shaved is a cycle earned.
In addition, add a CHECK_FOR_INTERRUPTS call in TS_execute_recurse.
This ensures that hlCover's loop is cancellable if it manages to take
a long time, and it may protect some other TS_execute callers as well.
Back-patch to 9.6 as the previous commit was. I also chose to add the
CHECK_FOR_INTERRUPTS call to 9.5. The old hlCover() algorithm seems
to avoid the O(N^2) behavior, at least on the test case I tried, but
nonetheless it's not very quick on a long document.
Per report from Stephen Frost.
Discussion: https://postgr.es/m/20200724160535.GW12375@tamriel.snowman.net
Add a GUC that acts as a multiplier on work_mem. It gets applied when
sizing executor node hash tables that were previously size constrained
using work_mem alone.
The new GUC can be used to preferentially give hash-based nodes more
memory than the generic work_mem limit. It is intended to enable admin
tuning of the executor's memory usage. Overall system throughput and
system responsiveness can be improved by giving hash-based executor
nodes more memory (especially over sort-based alternatives, which are
often much less sensitive to being memory constrained).
The default value for hash_mem_multiplier is 1.0, which is also the
minimum valid value. This means that hash-based nodes continue to apply
work_mem in the traditional way by default.
hash_mem_multiplier is generally useful. However, it is being added now
due to concerns about hash aggregate performance stability for users
that upgrade to Postgres 13 (which added disk-based hash aggregation in
commit 1f39bce0). While the old hash aggregate behavior risked
out-of-memory errors, it is nevertheless likely that many users actually
benefited. Hash agg's previous indifference to work_mem during query
execution was not just faster; it also accidentally made aggregation
resilient to grouping estimate problems (at least in cases where this
didn't create destabilizing memory pressure).
hash_mem_multiplier can provide a certain kind of continuity with the
behavior of Postgres 12 hash aggregates in cases where the planner
incorrectly estimates that all groups (plus related allocations) will
fit in work_mem/hash_mem. This seems necessary because hash-based
aggregation is usually much slower when only a small fraction of all
groups can fit. Even when it isn't possible to totally avoid hash
aggregates that spill, giving hash aggregation more memory will reliably
improve performance (the same cannot be said for external sort
operations, which appear to be almost unaffected by memory availability
provided it's at least possible to get a single merge pass).
The PostgreSQL 13 release notes should advise users that increasing
hash_mem_multiplier can help with performance regressions associated
with hash aggregation. That can be taken care of by a later commit.
Author: Peter Geoghegan
Reviewed-By: Álvaro Herrera, Jeff Davis
Discussion: https://postgr.es/m/20200625203629.7m6yvut7eqblgmfo@alap3.anarazel.de
Discussion: https://postgr.es/m/CAH2-WzmD%2Bi1pG6rc1%2BCjc4V6EaFJ_qSuKCCHVnH%3DoruqD-zqow%40mail.gmail.com
Backpatch: 13-, where disk-based hash aggregation was introduced.
Note: This GUC was originally named enable_hashagg_disk when it appeared
in commit 1f39bce0, which added disk-based hash aggregation. It was
subsequently renamed in commit 92c58fd9.
Author: Peter Geoghegan
Reviewed-By: Jeff Davis, Álvaro Herrera
Discussion: https://postgr.es/m/9d9d1e1252a52ea1bad84ea40dbebfd54e672a0f.camel%40j-davis.com
Backpatch: 13-, where disk-based hash aggregation was introduced.
The initial implementation of leader_pid in pg_stat_activity added by
b025f32 took the approach to strictly print what a PGPROC entry
includes. In short, if a backend has been involved in parallel query at
least once, leader_pid would remain set as long as the backend is alive.
For a parallel group leader, this means that the field would always be
set after it participated at least once in parallel query, and after
more discussions this could be confusing if using for example a
connection pooler.
This commit changes the data printed so as leader_pid becomes always
NULL for a parallel group leader, showing up a non-NULL value only for
the parallel workers, and actually as long as a parallel query is
running as workers are shut down once the query has completed.
This does not change the definition of any catalog, so no catalog bump
is needed. Per discussion with Justin Pryzby, Álvaro Herrera, Julien
Rouhaud and me.
Discussion: https://postgr.es/m/20200721035145.GB17300@paquier.xyz
Backpatch-through: 13
It's fairly silly that ignoring NOT subexpressions is TS_execute's
default behavior. It's wrong on its face and it encourages errors
of omission. Moreover, the only two remaining callers that aren't
specifying CALC_NOT are in ts_headline calculations, and it's very
arguable that those are bugs: if you've specified "!foo" in your
query, why would you want to get a headline that includes "foo"?
Hence, rip that out and change the default behavior to be to calculate
NOT accurately. As a concession to the slim chance that there is still
somebody somewhere who needs the incorrect behavior, provide a new
SKIP_NOT flag to explicitly request that.
Back-patch into v13, mainly because it seems better to change this
at the same time as the previous commit's rejiggering of TS_execute
related APIs. Any outside callers affected by this change are
probably also affected by that one.
Discussion: https://postgr.es/m/CALT9ZEE-aLotzBg-pOp2GFTesGWVYzXA3=mZKzRDa_OKnLF7Mg@mail.gmail.com
Text search sometimes failed to find valid matches, for instance
'!crew:A'::tsquery might fail to locate 'crew:1B'::tsvector during
an index search. The root of the issue is that TS_execute's callback
functions were not changed to use ternary (yes/no/maybe) reporting
when we made the search logic itself do so. It's somewhat annoying
to break that API, but on the other hand we now see that any code
using plain boolean logic is almost certainly broken since the
addition of phrase search. There seem to be very few outside callers
of this code anyway, so we'll just break them intentionally to get
them to adapt.
This allows removal of tsginidx.c's private re-implementation of
TS_execute, since that's now entirely duplicative. It's also no
longer necessary to avoid use of CALC_NOT in tsgistidx.c, since
the underlying callbacks can now do something reasonable.
Back-patch into v13. We can't change this in stable branches,
but it seems not quite too late to fix it in v13.
Tom Lane and Pavel Borisov
Discussion: https://postgr.es/m/CALT9ZEE-aLotzBg-pOp2GFTesGWVYzXA3=mZKzRDa_OKnLF7Mg@mail.gmail.com
Since commit 044c99bc5, eqjoinsel passes the passed-in collation
to any operators it invokes. However, neqjoinsel failed to pass
on whatever collation it got, so that if we invoked a
collation-dependent operator via that code path, we'd get "could not
determine which collation to use for string comparison" or the like.
Per report from Justin Pryzby. Back-patch to v12, like the previous
commit.
Discussion: https://postgr.es/m/20200721191606.GL5748@telsasoft.com
max_slot_wal_keep_size that was added in v13 and wal_keep_segments are
the GUC parameters to specify how much WAL files to retain for
the standby servers. While max_slot_wal_keep_size accepts the number of
bytes of WAL files, wal_keep_segments accepts the number of WAL files.
This difference of setting units between those similar parameters could
be confusing to users.
To alleviate this situation, this commit renames wal_keep_segments to
wal_keep_size, and make users specify the WAL size in it instead of
the number of WAL files.
There was also the idea to rename max_slot_wal_keep_size to
max_slot_wal_keep_segments, in the discussion. But we have been moving
away from measuring in segments, for example, checkpoint_segments was
replaced by max_wal_size. So we concluded to rename wal_keep_segments
to wal_keep_size.
Back-patch to v13 where max_slot_wal_keep_size was added.
Author: Fujii Masao
Reviewed-by: Álvaro Herrera, Kyotaro Horiguchi, David Steele
Discussion: https://postgr.es/m/574b4ea3-e0f9-b175-ead2-ebea7faea855@oss.nttdata.com
SQL standard doesn't define numeric Inf or NaN values. It appears even more
ridiculous to support then in jsonpath assuming JSON doesn't support these
values as well. This commit forbids returning NaN from .double(), which was
previously allowed. NaN can't be result of inner-jsonpath computation over
non-NaNs. So, we can not expect NaN in the jsonpath output.
Reported-by: Tom Lane
Discussion: https://postgr.es/m/203949.1591879542%40sss.pgh.pa.us
Author: Alexander Korotkov
Reviewed-by: Tom Lane
Backpatch-through: 12
When jsonpath .double() method detects that numeric or string can't be
converted to double precision, it throws an error. This commit makes these
errors explicitly express the reason of failure.
Discussion: https://postgr.es/m/CAPpHfdtqJtiSXkP7tOXez18NxhLUH_-75bL8%3DOce4Ki%2Bbv7V6Q%40mail.gmail.com
Author: Alexander Korotkov
Reviewed-by: Tom Lane
Backpatch-through: 12
Due to not having our signals straight about CRLF vs. LF line
termination, the output of pg_current_logfile() included a trailing
\r on Windows. To fix, force the file descriptor it uses into text
mode.
While here, move a couple of local variable declarations to make
the function's logic clearer.
In v12 and v13, also back-patch the test added by 1c4e88e2f so that
this function has some test coverage. However, the 004_logrotate.pl
test script doesn't exist before v12, and it didn't seem worth adding
to older branches just for this.
Per report from Thomas Kellerer. Back-patch to v10 where this
function was added.
Discussion: https://postgr.es/m/412ae8da-76bb-640f-039a-f3513499e53d@gmx.net
The cfbot and some BF animals are complaining about the previous
read_binary_file commit because of ignoring return value of ‘fread’.
So let's make everyone happy by testing the return value even though
not strictly needed.
Reported by Justin Pryzby, and suggested patch by Tom Lane. Backpatched
to v11 same as the previous commit.
Reported-By: Justin Pryzby
Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/flat/969b8d82-5bb2-5fa8-4eb1-f0e685c5d736%40joeconway.com
Backpatch-through: 11
read_binary_file(), used by SQL functions pg_read_file() and friends,
uses stat to determine file length to read, when not passed an explicit
length as an argument. This is problematic, for example, if the file
being read is a virtual file with a stat-reported length of zero.
Arrange to read until EOF, or StringInfo data string lenth limit, is
reached instead.
Original complaint and patch by me, with significant review, corrections,
advice, and code optimizations by Tom Lane. Backpatched to v11. Prior to
that only paths relative to the data and log dirs were allowed for files,
so no "zero length" files were reachable anyway.
Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/flat/969b8d82-5bb2-5fa8-4eb1-f0e685c5d736%40joeconway.com
Backpatch-through: 11
Convert buffile.c error handling to use ereport. This fixes cases where
I/O errors were indistinguishable from EOF or not reported. Also remove
"%m" from error messages where errno would be bogus. While we're
modifying those strings, add block numbers and short read byte counts
where appropriate.
Back-patch to all supported releases.
Reported-by: Amit Khandekar <amitdkhan.pg@gmail.com>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Ibrar Ahmed <ibrar.ahmad@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CA%2BhUKGJE04G%3D8TLK0DLypT_27D9dR8F1RQgNp0jK6qR0tZGWOw%40mail.gmail.com
When there is just one non-null input value, and it is infinity or NaN,
aggregates such as stddev_pop and covar_pop should produce a NaN
result, because the calculation is not well-defined. They used to do
so, but since we adopted Youngs-Cramer aggregation in commit e954a727f,
they produced zero instead. That's an oversight, so fix it. Add tests
exercising these edge cases.
Affected aggregates are
var_pop(double precision)
stddev_pop(double precision)
var_pop(real)
stddev_pop(real)
regr_sxx(double precision,double precision)
regr_syy(double precision,double precision)
regr_sxy(double precision,double precision)
regr_r2(double precision,double precision)
regr_slope(double precision,double precision)
regr_intercept(double precision,double precision)
covar_pop(double precision,double precision)
corr(double precision,double precision)
Back-patch to v12 where the behavior change was accidentally introduced.
Report and patch by me; thanks to Dean Rasheed for review.
Discussion: https://postgr.es/m/353062.1591898766@sss.pgh.pa.us
In passing, also remove a few surplus empty lines from pg_ltoa and
pg_ulltoa_n in numutils.c
Reported-by: Andrew Gierth
Discussion: https://postgr.es/m/87y2ou3xuh.fsf@news-spur.riddles.org.uk
Backpatch-through: 13, where these changes were introduced
When merging two NumericAggStates, the code missed adding the new
state's NaNcount unless its N was also nonzero; since those counts
are independent, this is wrong.
This would only have visible effect if some partial aggregate scans
found only NaNs while earlier ones found only non-NaNs; then we could
end up falsely deciding that there were no NaNs and fail to return a
NaN final result as expected. That's pretty improbable, so it's no
surprise this hasn't been reported from the field. Still, it's a bug.
I didn't try to produce a regression test that would show the bug,
but I did notice that these functions weren't being reached at all
in our regression tests, so I improved the tests to at least
exercise them. With these additions, I see pretty complete code
coverage on the aggregation-related functions in numeric.c.
Back-patch to 9.6 where this code was introduced. (I only added
the improved test case as far back as v10, though, since the
relevant part of aggregates.sql isn't there at all in 9.6.)
Eliminate enable_groupingsets_hash_disk, which was primarily useful
for testing grouping sets that use HashAgg and spill. Instead, hack
the table stats to convince the planner to choose hashed aggregation
for grouping sets that will spill to disk. Suggested by Melanie
Plageman.
Rename enable_hashagg_disk to hashagg_avoid_disk_plan, and invert the
meaning of on/off. The new name indicates more strongly that it only
affects the planner. Also, the word "avoid" is less definite, which
should avoid surprises when HashAgg still needs to use the
disk. Change suggested by Justin Pryzby, though I chose a different
GUC name.
Discussion: https://postgr.es/m/CAAKRu_aisiENMsPM2gC4oUY1hHG3yrCwY-fXUg22C6_MJUwQdA%40mail.gmail.com
Discussion: https://postgr.es/m/20200610021544.GA14879@telsasoft.com
Backpatch-through: 13
The previous description string still described the pre-PostgreSQL
10 (pre eb61136dc7) behavior of
selecting between encrypted and unencrypted, but it is now choosing
between encryption algorithms.
Commit 24d85952 made a change that indirectly caused a performance
regression by triggering a change in the way GCC optimizes memcpy() on
some platforms.
The behavior seemed to contradict a GCC document, so I filed a report:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=95556
This patch implements a narrow workaround which eliminates the
regression I observed. The workaround is benign enough that it seems
unlikely to cause a different regression on another platform.
Discussion: https://postgr.es/m/99b2eab335c1592c925d8143979c8e9e81e1575f.camel@j-davis.com
ineq_histogram_selectivity() can be invoked in situations where the
ordering we care about is not that of the column's histogram. We could
be considering some other collation, or even more drastically, the
query operator might not agree at all with what was used to construct
the histogram. (We'll get here for anything using scalarineqsel-based
estimators, so that's quite likely to happen for extension operators.)
Up to now we just ignored this issue and assumed we were dealing with
an operator/collation whose sort order exactly matches the histogram,
possibly resulting in junk estimates if the binary search gets confused.
It's past time to improve that, since the use of nondefault collations
is increasing. What we can do is verify that the given operator and
collation match what's recorded in pg_statistic, and use the existing
code only if so. When they don't match, instead execute the operator
against each histogram entry, and take the fraction of successes as our
selectivity estimate. This gives an estimate that is probably good to
about 1/histogram_size, with no assumptions about ordering. (The quality
of the estimate is likely to degrade near the ends of the value range,
since the two orderings probably don't agree on what is an extremal value;
but this is surely going to be more reliable than what we did before.)
At some point we might further improve matters by storing more than one
histogram calculated according to different orderings. But this code
would still be good fallback logic when no matches exist, so that is
not an argument for not doing this.
While here, also improve get_variable_range() to deal more honestly
with non-default collations.
This isn't back-patchable, because it requires adding another argument
to ineq_histogram_selectivity, and because it might have significant
impact on the estimation results for extension operators relying on
scalarineqsel --- mostly for the better, one hopes, but in any case
destabilizing plan choices in back branches is best avoided.
Per investigation of a report from James Lucas.
Discussion: https://postgr.es/m/CAAFmbbOvfi=wMM=3qRsPunBSLb8BFREno2oOzSBS=mzfLPKABw@mail.gmail.com
Commit 5e0928005 changed the planner so that, instead of blindly using
DEFAULT_COLLATION_OID when invoking operators for selectivity estimation,
it would use the collation of the column whose statistics we're
considering. This was recognized as still being not quite the right
thing, but it seemed like a good incremental improvement. However,
shortly thereafter we introduced nondeterministic collations, and that
creates cases where operators can fail if they're passed the wrong
collation. We don't want planning to fail in cases where the query itself
would work, so this means that we *must* use the query's collation when
invoking operators for estimation purposes.
The only real problem this creates is in ineq_histogram_selectivity, where
the binary search might produce a garbage answer if we perform comparisons
using a different collation than the column's histogram is ordered with.
However, when the query's collation is significantly different from the
column's default collation, the estimate we previously generated would be
pretty irrelevant anyway; so it's not clear that this will result in
noticeably worse estimates in practice. (A follow-on patch will improve
this situation in HEAD, but it seems too invasive for back-patch.)
The patch requires changing the signatures of mcv_selectivity and allied
functions, which are exported and very possibly are used by extensions.
In HEAD, I just did that, but an API/ABI break of this sort isn't
acceptable in stable branches. Therefore, in v12 the patch introduces
"mcv_selectivity_ext" and so on, with signatures matching HEAD, and makes
the old functions into wrappers that assume DEFAULT_COLLATION_OID should
be used. That does not match the prior behavior, but it should avoid risk
of failure in most cases. (In practice, I think most extension datatypes
aren't collation-aware, so the change probably doesn't matter to them.)
Per report from James Lucas. Back-patch to v12 where the problem was
introduced.
Discussion: https://postgr.es/m/CAAFmbbOvfi=wMM=3qRsPunBSLb8BFREno2oOzSBS=mzfLPKABw@mail.gmail.com
It's intentional that we don't allow values greater than 24 hours,
while we do allow "24:00:00" as well as "23:59:60" as inputs.
However, the range check was miscoded in such a way that it would
accept "23:59:60.nnn" with a nonzero fraction. For time or timetz,
the stored result would then be greater than "24:00:00" which would
fail dump/reload, not to mention possibly confusing other operations.
Fix by explicitly calculating the result and making sure it does not
exceed 24 hours. (This calculation is redundant with what will happen
later in tm2time or tm2timetz. Maybe someday somebody will find that
annoying enough to justify refactoring to avoid the duplication; but
that seems too invasive for a back-patched bug fix, and the cost is
probably unmeasurable anyway.)
Note that this change also rejects such input as the time portion
of a timestamp(tz) value.
Back-patch to v10. The bug is far older, but to change this pre-v10
we'd need to ensure that the logic behaves sanely with float timestamps,
which is possibly nontrivial due to roundoff considerations.
Doesn't really seem worth troubling with.
Per report from Christoph Berg.
Discussion: https://postgr.es/m/20200520125807.GB296739@msg.df7cb.de
This issue has been present since the introduction of this code as of
a3519a2 from 2002, and has been found by buildfarm member prion that
uses RELCACHE_FORCE_RELEASE via the tests introduced recently in
e786be5.
Discussion: https://postgr.es/m/20200601022055.GB4121@paquier.xyz
Backpatch-through: 9.5
A relation that has no storage initializes rd_tableam to NULL, which
caused those two functions to crash because of a pointer dereference.
Note that in 11 and older versions, this has always failed with a
confusing error "could not open file".
These two functions are used by the Postgres ODBC driver, which requires
them only when connecting to a backend strictly older than 8.1. When
connected to 8.2 or a newer version, the driver uses a RETURNING clause
instead whose support has been added in 8.2, so it should be possible to
just remove both functions in the future. This is left as an issue to
address later.
While on it, add more regression tests for those functions as we never
really had coverage for them, and for aggregates of TIDs.
Reported-by: Jaime Casanova, via sqlsmith
Author: Michael Paquier
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/CAJGNTeO93u-5APMga6WH41eTZ3Uee9f3s8dCpA-GSSqNs1b=Ug@mail.gmail.com
Backpatch-through: 12
The repeat() function loops for potentially a long time without
ever checking for interrupts. This prevents, for example, a query
cancel from interrupting until the work is all done. Fix by
inserting a CHECK_FOR_INTERRUPTS() into the loop.
Backpatch to all supported versions.
Discussion: https://www.postgresql.org/message-id/flat/8692553c-7fe8-17d9-cbc1-7cddb758f4c6%40joeconway.com
Disk-based HashAgg relies on writing to multiple tapes
concurrently. Avoid fragmentation of the tapes' blocks by
preallocating many blocks for a tape at once. No file operations are
performed during preallocation; only the block numbers are reserved.
Reviewed-by: Tomas Vondra
Discussion: https://postgr.es/m/20200519151202.u2p2gpiawoaznsv2%40development
Thomas Munro fixed a longstanding annoyance in pg_bsd_indent, that
it would misformat lines containing IsA() macros on the assumption
that the IsA() call should be treated like a cast. This improves
some other cases involving field/variable names that match typedefs,
too. The only places that get worse are a couple of uses of the
OpenSSL macro STACK_OF(); we'll gladly take that trade-off.
Discussion: https://postgr.es/m/20200114221814.GA19630@alvherre.pgsql
It's just weird that this name wasn't chosen to look like an
identifier. The suspicion that it wasn't thought about too
hard is reinforced by the fact that it wasn't documented in
the pg_locks view (until I did so, a day or two back).
Update, and add a comment reminding future adjusters of this
array to fix the docs too.
Do some desultory wordsmithing on various entries in the wait
events tables.
Discussion: https://postgr.es/m/24595.1589326879@sss.pgh.pa.us
Choose names that fit into the conventions for wait event names
(particularly, that multi-word names are in the style MultiWordName)
and hopefully convey more information to non-hacker users than the
previous names did.
Also rename SerializablePredicateLockListLock to
SerializablePredicateListLock; the old name was long enough to cause
table formatting problems, plus the double occurrence of "Lock" seems
confusing/error-prone.
Also change a couple of particularly opaque LWLock field names.
Discussion: https://postgr.es/m/28683.1589405363@sss.pgh.pa.us
Originally, the names assigned to SLRUs had no purpose other than
being shmem lookup keys, so not a lot of thought went into them.
As of v13, though, we're exposing them in the pg_stat_slru view and
the pg_stat_reset_slru function, so it seems advisable to take a bit
more care. Rename them to names based on the associated on-disk
storage directories (which fortunately we *did* think about, to some
extent; since those are also visible to DBAs, consistency seems like
a good thing). Also rename the associated LWLocks, since those names
are likewise user-exposed now as wait event names.
For the most part I only touched symbols used in the respective modules'
SimpleLruInit() calls, not the names of other related objects. This
renaming could have been taken further, and maybe someday we will do so.
But for now it seems undesirable to change the names of any globally
visible functions or structs, so some inconsistency is unavoidable.
(But I *did* terminate "oldserxid" with prejudice, as I found that
name both unreadable and not descriptive of the SLRU's contents.)
Table 27.12 needs re-alphabetization now, but I'll leave that till
after the other LWLock renamings I have in mind.
Discussion: https://postgr.es/m/28683.1589405363@sss.pgh.pa.us
Includes some manual cleanup of places that pgindent messed up,
most of which weren't per project style anyway.
Notably, it seems some people didn't absorb the style rules of
commit c9d297751, because there were a bunch of new occurrences
of function calls with a newline just after the left paren, all
with faulty expectations about how the rest of the call would get
indented.
Visual Studio 2015 and later versions should still be able to do the same
as Visual Studio 2012, but the declaration of locale_name is missing in
_locale_t, causing the code compilation to fail, hence this falls back
instead on to enumerating all system locales by using EnumSystemLocalesEx
to find the required locale name. If the input argument is in Unix-style
then we can get ISO Locale name directly by using GetLocaleInfoEx() with
LCType as LOCALE_SNAME.
In passing, change the documentation references of the now obsolete links.
Note that this problem occurs only with NLS enabled builds.
Author: Juan José Santamaría Flecha, Davinder Singh and Amit Kapila
Reviewed-by: Ranier Vilela and Amit Kapila
Backpatch-through: 9.5
Discussion: https://postgr.es/m/CAHzhFSFoJEWezR96um4-rg5W6m2Rj9Ud2CNZvV4NWc9tXV7aXQ@mail.gmail.com
The additional pain from level 4 is excessive for the gain.
Also revert all the source annotation changes to their original
wordings, to avoid back-patching pain.
Discussion: https://postgr.es/m/31166.1589378554@sss.pgh.pa.us
