The planner largely failed to consider the possibility that a
PlaceHolderVar's expression might contain a lateral reference to a Var
coming from somewhere outside the PHV's syntactic scope. We had a previous
report of a problem in this area, which I tried to fix in a quick-hack way
in commit 4da6439bd8, but Antonin Houska
pointed out that there were still some problems, and investigation turned
up other issues. This patch largely reverts that commit in favor of a more
thoroughly thought-through solution. The new theory is that a PHV's
ph_eval_at level cannot be higher than its original syntactic level. If it
contains lateral references, those don't change the ph_eval_at level, but
rather they create a lateral-reference requirement for the ph_eval_at join
relation. The code in joinpath.c needs to handle that.
Another issue is that createplan.c wasn't handling nested PlaceHolderVars
properly.
In passing, push knowledge of lateral-reference checks for join clauses
into join_clause_is_movable_to. This is mainly so that FDWs don't need
to deal with it.
This patch doesn't fix the original join-qual-placement problem reported by
Jeremy Evans (and indeed, one of the new regression test cases shows the
wrong answer because of that). But the PlaceHolderVar problems need to be
fixed before that issue can be addressed, so committing this separately
seems reasonable.
The planner logic that attempted to make a preliminary estimate of the
ph_needed levels for PlaceHolderVars seems to be completely broken by
lateral references. Fortunately, the potential join order optimization
that this code supported seems to be of relatively little value in
practice; so let's just get rid of it rather than trying to fix it.
Getting rid of this allows fairly substantial simplifications in
placeholder.c, too, so planning in such cases should be a bit faster.
Issue noted while pursuing bugs reported by Jeremy Evans and Antonin
Houska, though this doesn't in itself fix either of their reported cases.
What this does do is prevent an Assert crash in the kind of query
illustrated by the added regression test. (I'm not sure that the plan for
that query is stable enough across platforms to be usable as a regression
test output ... but we'll soon find out from the buildfarm.)
Back-patch to 9.3. The problem case can't arise without LATERAL, so
no need to touch older branches.
My tweak of these error messages in commit c359a1b082 contained the
thinko that a query would always have rowMarks set for a query
containing a locking clause. Not so: when declaring a cursor, for
instance, rowMarks isn't set at the point we're checking, so we'd be
dereferencing a NULL pointer.
The fix is to pass the lock strength to the function raising the error,
instead of trying to reverse-engineer it. The result not only is more
robust, but it also seems cleaner overall.
Per report from Robert Haas.
As pointed out by Tom Lane, we can allow other users of the error
handler callbacks to provide their own memory context by adding
the context to use to ErrorData and using that instead of explicitly
using ErrorContext.
This then allows GetErrorContextStack() to be called from inside
exception handlers, so modify plpgsql to take advantage of that and
add an associated regression test for it.
We'd find the same match twice if it was of zero length and not immediately
adjacent to the previous match. replace_text_regexp() got similar cases
right, so adjust this search logic to match that. Note that even though
the regexp_split_to_xxx() functions share this code, they did not display
equivalent misbehavior, because the second match would be considered
degenerate and ignored.
Jeevan Chalke, with some cosmetic changes by me.
Refactoring as part of commit 8ceb245680
had the unintended effect of making REINDEX TABLE and REINDEX DATABASE
no longer validate constraints enforced by the indexes in question;
REINDEX INDEX still did so. Indexes marked invalid remained so, and
constraint violations arising from data corruption went undetected.
Back-patch to 9.0, like the causative commit.
As GetErrorContextStack() borrowed setup and tear-down code from other
places, it was less than clear that it must only be called as a
top-level entry point into the error system and can't be called by an
exception handler (unlike the rest of the error system, which is set up
to be reentrant-safe).
Being called from an exception handler is outside the charter of
GetErrorContextStack(), so add a bit more protection against it,
improve the comments addressing why we have to set up an errordata
stack for this function at all, and add a few more regression tests.
Lack of clarity pointed out by Tom Lane; all bugs are mine.
This adds the ability to get the call stack as a string from within a
PL/PgSQL function, which can be handy for logging to a table, or to
include in a useful message to an end-user.
Pavel Stehule, reviewed by Rushabh Lathia and rather heavily whacked
around by Stephen Frost.
After further thought about implicit coercions appearing in a joinaliasvars
list, I realized that they represent an additional reason why we might need
to reference the join output column directly instead of referencing an
underlying column. Consider SELECT x FROM t1 LEFT JOIN t2 USING (x) where
t1.x is of type date while t2.x is of type timestamptz. The merged output
variable is of type timestamptz, but it won't go to null when t2 does,
therefore neither t1.x nor t2.x is a valid substitute reference.
The code in get_variable() actually gets this case right, since it knows
it shouldn't look through a coercion, but we failed to ensure that the
unqualified output column name would be globally unique. To fix, modify
the code that trawls for a dangerous situation so that it actually scans
through an unnamed join's joinaliasvars list to see if there are any
non-simple-Var entries.
It's possible to drop a column from an input table of a JOIN clause in a
view, if that column is nowhere actually referenced in the view. But it
will still be there in the JOIN clause's joinaliasvars list. We used to
replace such entries with NULL Const nodes, which is handy for generation
of RowExpr expansion of a whole-row reference to the view. The trouble
with that is that it can't be distinguished from the situation after
subquery pull-up of a constant subquery output expression below the JOIN.
Instead, replace such joinaliasvars with null pointers (empty expression
trees), which can't be confused with pulled-up expressions. expandRTE()
still emits the old convention, though, for convenience of RowExpr
generation and to reduce the risk of breaking extension code.
In HEAD and 9.3, this patch also fixes a problem with some new code in
ruleutils.c that was failing to cope with implicitly-casted joinaliasvars
entries, as per recent report from Feike Steenbergen. That oversight was
because of an inadequate description of the data structure in parsenodes.h,
which I've now corrected. There were some pre-existing oversights of the
same ilk elsewhere, which I believe are now all fixed.
Future patches are expected to introduce logical replication that
works by decoding WAL. WAL contains relfilenodes rather than relation
OIDs, so this infrastructure will be needed to find the relation OID
based on WAL contents.
If logical replication does not make it into this release, we probably
should consider reverting this, since it will add some overhead to DDL
operations that create new relations. One additional index insert per
pg_class row is not a large overhead, but it's more than zero.
Another way of meeting the needs of logical replication would be to
the relation OID to WAL, but that would burden DML operations, not
only DDL.
Andres Freund, with some changes by me. Design review, in earlier
versions, by Álvaro Herrera.
An ancient logic error in cfindloop() could cause the regex engine to fail
to find matches that begin later than the start of the string. This
function is only used when the regex pattern contains a back reference,
and so far as we can tell the error is only reachable if the pattern is
non-greedy (i.e. its first quantifier uses the ? modifier). Furthermore,
the actual match must begin after some potential match that satisfies the
DFA but then fails the back-reference's match test.
Reported and fixed by Jeevan Chalke, with cosmetic adjustments by me.
For simple views which are automatically updatable, this patch allows
the user to specify what level of checking should be done on records
being inserted or updated. For 'LOCAL CHECK', new tuples are validated
against the conditionals of the view they are being inserted into, while
for 'CASCADED CHECK' the new tuples are validated against the
conditionals for all views involved (from the top down).
This option is part of the SQL specification.
Dean Rasheed, reviewed by Pavel Stehule
This is more efficient and simpler . It does mean that an untyped NULL
can no longer be used in such cases, which should be mentioned in
Release Notes, but doesn't seem a terrible loss. The workaround is to
cast the NULL to some array type.
Pavel Stehule, reviewed by Jeevan Chalke.
This is SQL-standard with a few extensions, namely support for
subqueries and outer references in clause expressions.
catversion bump due to change in Aggref and WindowFunc.
David Fetter, reviewed by Dean Rasheed.
This allows reads to continue without any blocking while a REFRESH
runs. The new data appears atomically as part of transaction
commit.
Review questioned the Assert that a matview was not a system
relation. This will be addressed separately.
Reviewed by Hitoshi Harada, Robert Haas, Andres Freund.
Merged after review with security patch f3ab5d4.
The code in set_append_rel_pathlist() for building parameterized paths
for append relations (inheritance and UNION ALL combinations) supposed
that the cheapest regular path for a child relation would still be cheapest
when reparameterized. Which might not be the case, particularly if the
added join conditions are expensive to compute, as in a recent example from
Jeff Janes. Fix it to compare child path costs *after* reparameterizing.
We can short-circuit that if the cheapest pre-existing path is already
parameterized correctly, which seems likely to be true often enough to be
worth checking for.
Back-patch to 9.2 where parameterized paths were introduced.
Commit 31a891857a added some tests in
plpgsql.sql that used a function rather unthinkingly named "foo()".
However, rangefuncs.sql has some much older tests that create a function
of that name, and since these test scripts run in parallel, there is a
chance of failures if the timing is just right. Use another name to
avoid that. Per buildfarm (failure seen today on "hamerkop", but
probably it's happened before and not been noticed).
This value, now pg_stat_all_tables.n_mod_since_analyze, was already
tracked and used by autovacuum, but not exposed to the user.
Mark Kirkwood, review by Laurenz Albe
Treat TOAST index just the same as normal one and get the OID
of TOAST index from pg_index but not pg_class.reltoastidxid.
This change allows us to handle multiple TOAST indexes, and
which is required infrastructure for upcoming
REINDEX CONCURRENTLY feature.
Patch by Michael Paquier, reviewed by Andres Freund and me.
The collate.linux.utf8 test covers some of the same territory, but
isn't portable and so probably does not get run often, or on
non-Linux platforms. If this approach turns out to be sufficiently
portable, we may want to look at trimming the redundant tests out
of that file to avoid duplication.
Robins Tharakan, reviewed by Michael Paquier and Fabien Coelho,
with further changes and cleanup by me.
An INSERT into such a view should work just like an INSERT into its base
table, ie the insertion should go directly into that table ... not be
duplicated into each child table, as was happening before, per bug #8275
from Rushabh Lathia. On the other hand, the current behavior for
UPDATE/DELETE seems reasonable: the update/delete traverses the child
tables, or not, depending on whether the view specifies ONLY or not.
Add some regression tests covering this area.
Dean Rasheed
Specifically, permit attaching them to the error in RAISE and retrieving
them from a caught error in GET STACKED DIAGNOSTICS. RAISE enforces
nothing about the content of the fields; for its purposes, they are just
additional string fields. Consequently, clarify in the protocol and
libpq documentation that the usual relationships between error fields,
like a schema name appearing wherever a table name appears, are not
universal. This freedom has other applications; consider a FDW
propagating an error from an RDBMS having no schema support.
Back-patch to 9.3, where core support for the error fields was
introduced. This prevents the confusion of having a release where libpq
exposes the fields and PL/pgSQL does not.
Pavel Stehule, lexical revisions by Noah Misch.
To that end, support tags rather than lengths for external datums.
As an example of how this can be used, add support or "indirect"
tuples which point to some externally allocated memory containing
a toast tuple. Similar infrastructure could be used for other
purposes, including, perhaps, support for alternative compression
algorithms.
Andres Freund, reviewed by Hitoshi Harada and myself
The dependencies on the spi and dummy_seclabel contrib modules were
incomplete, because they did not pick up automatically generated
dependencies on header files. This will manifest itself especially when
switching major versions, where the contrib modules would not be
recompiled to contain the new version number, leading to regression test
failures.
To fix this, use the submake approach already in use elsewhere, so that
the contrib modules are built using their full rules.
This results in a slightly less specific error message when OVER
is used in a context where we don't accept window functions, but
per discussion, it's worth it to get the benefit of not needing
to reserve this keyword any more. This same refactoring will
also let us avoid reserving some other keywords that we expect
to add in upcoming patches (specifically, IGNORE, RESPECT, and
FILTER).
Troels Nielsen, with minor changes by me
In Danish collations, there are letter combinations which sort
higher than 'Z'. A test for values > 'WA' was picking up rows
where the value started with 'AA', causing the test to fail.
Backpatch to 9.2, where the failing test was added.
Per report from Svenne Krap and analysis by Jeff Janes
Per discussion on -hackers. We treat Unicode escapes when unescaping
them similarly to the way we treat them in PostgreSQL string literals.
Escapes in the ASCII range are always accepted, no matter what the
database encoding. Escapes for higher code points are only processed in
UTF8 databases, and attempts to process them in other databases will
result in an error. \u0000 is never unescaped, since it would result in
an impermissible null byte.
When the existing code here was written, it made sense to special-case
RowExprs because that was the only way that we could handle row comparisons
at all. Now that we have record_eq() and arrays of composites, the generic
logic for "scalar" types will in fact work on RowExprs too, so there's no
reason to throw error for combinations of RowExprs and other ways of
forming composite values, nor to ignore the possibility of using a
ScalarArrayOpExpr. But keep using the old logic when comparing two
RowExprs, for consistency with the main transformAExprOp() logic. (This
allows some cases with not-quite-identical rowtypes to succeed, so we might
get push-back if we removed it.) Per bug #8198 from Rafal Rzepecki.
Back-patch to all supported branches, since this works fine as far back as
8.4.
Rafal Rzepecki and Tom Lane
In 9.2, Unicode escape sequences are not analysed at all other than
to make sure that they are in the form \uXXXX. But in 9.3 many of the
new operators and functions try to turn JSON text values into text in
the server encoding, and this includes de-escaping Unicode escape
sequences. This processing had not taken into account the possibility
that this might contain a surrogate pair to designate a character
outside the BMP. That is now handled correctly.
This also enforces correct use of surrogate pairs, something that is not
done by the type's input routines. This fact is noted in the docs.
The planner is aware that it mustn't push down upper-level quals into
subqueries if the quals reference subquery output columns that contain
set-returning functions or volatile functions, or are non-DISTINCT outputs
of a DISTINCT ON subquery. However, it missed making this check when
there were one or more levels of UNION or INTERSECT above the dangerous
expression. This could lead to "set-valued function called in context that
cannot accept a set" errors, as seen in bug #8213 from Eric Soroos, or to
silently wrong answers in the other cases.
To fix, refactor the checks so that we make the column-is-unsafe checks
during subquery_is_pushdown_safe(), which already has to recursively
inspect all arms of a set-operation tree. This makes
qual_is_pushdown_safe() considerably simpler, at the cost that we will
spend some cycles checking output columns that possibly aren't referenced
in any upper qual. But the cases where this code gets executed at all
are already nontrivial queries, so it's unlikely anybody will notice any
slowdown of planning.
This has been broken since commit 05f916e6ad,
which makes the bug over ten years old. A bit surprising nobody noticed it
before now.
euc_* and mule_internal test cases were identical to the ones in
src/test/mb. sql_ascii didn't exist elsewhere, but has been broken since
2001, and doesn't seem very interesting anyway. drop.sql hasn't been used
since 2000, when regress.sh was removed.
Fixes oversight in commit 2ffa740be9.
Per report from Josh Kupershmidt.
I think we've broken this case before, so let's add a regression test
this time.
In a construct like "select plain_function(set_returning_function(...))",
the plain function is applied to each output row of the SRF successively.
If some of the SRF outputs are NULL, and the plain function is strict,
you'd expect to get NULL results for such rows ... but what actually
happened was that such rows were omitted entirely from the result set.
This was due to confusion of this case with what should happen for nested
set-returning functions; a strict SRF is indeed supposed to yield an empty
set for null input. Per bug #8150 from Erwin Brandstetter.
Although this has been broken forever, we're not back-patching because
of the possibility that some apps out there expect the incorrect behavior.
This change should be listed as a possible incompatibility in the 9.3
release notes.
