Teach parallel nbtree index scans to use an LWLock (not a spinlock) to
protect the scan's shared descriptor state.
Preparation for an upcoming patch that will add skip scan optimizations
to nbtree. That patch will create the need to occasionally allocate
memory while the scan descriptor is locked, while copying datums that
were serialized by another backend.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wz=PKR6rB7qbx+Vnd7eqeB5VTcrW=iJvAsTsKbdG+kW_UA@mail.gmail.com
After more discussion about commit ce62f2f2a0, rename the index AM
property amcancrosscompare to two separate properties
amconsistentequality and amconsistentordering. Also improve the
documentation and update some comments that were previously missed.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/E1tngY6-0000UL-2n%40gemulon.postgresql.org
This allows smallint, integer, and bigint values to be cast to and
from bytea. The bytea value is the two's complement representation of
the integer, with the most significant byte first. For example:
1234::bytea -> \x000004d2
(-1234)::bytea -> \xfffffb2e
Author: Aleksander Alekseev <aleksander@timescale.com>
Reviewed-by: Joel Jacobson <joel@compiler.org>
Reviewed-by: Yugo Nagata <nagata@sraoss.co.jp>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Discussion: https://postgr.es/m/CAJ7c6TPtOp6%2BkFX5QX3fH1SVr7v65uHr-7yEJ%3DGMGQi5uhGtcA%40mail.gmail.com
Clang with -Wtypedef-redefinition produced warnings:
src/include/storage/latch.h:122:3: error: redefinition of typedef 'Latch' is a C11 feature [-Werror,-Wtypedef-redefinition]
Per buildfarm
This reverts commit 5ead85fbc8.
This commit shows test failures with debug_parallel_query=regress. The
underlying issue needs to be debugged, so revert for now.
An additional paramater ("strip_in_arrays") is added to these functions.
It defaults to false. If true, then null array elements are removed as
well as null valued object fields. JSON that just consists of a single
null is not affected.
Author: Florents Tselai <florents.tselai@gmail.com>
Discussion: https://postgr.es/m/4BCECCD5-4F40-4313-9E98-9E16BEB0B01D@gmail.com
Expose the count of index searches/index descents in EXPLAIN ANALYZE's
output for index scan nodes. This information is particularly useful
with scans that use ScalarArrayOp quals, where the number of index scans
isn't predictable in advance (at least not with optimizations like the
one added to nbtree by Postgres 17 commit 5bf748b8). It will also be
useful when EXPLAIN ANALYZE shows details of an nbtree index scan that
uses skip scan optimizations set to be introduced by an upcoming patch.
The instrumentation works by teaching index AMs to increment a new
nsearches counter whenever a new index search begins. The counter is
incremented at exactly the same point that index AMs must already
increment the index's pg_stat_*_indexes.idx_scan counter (we're counting
the same event, but at the scan level rather than the relation level).
The new counter is stored in the scan descriptor (IndexScanDescData),
which explain.c reaches by going through the scan node's PlanState.
This approach doesn't match the approach used when tracking other index
scan specific costs (e.g., "Rows Removed by Filter:"). It is similar to
the approach used in other cases where we must track costs that are only
readily accessible inside an access method, and not from the executor
(e.g., "Heap Blocks:" output for a Bitmap Heap Scan). It is inherently
necessary to maintain a counter that can be incremented multiple times
during a single amgettuple call (or amgetbitmap call), and directly
exposing PlanState.instrument to index access methods seems unappealing.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Tomas Vondra <tomas@vondra.me>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Masahiro Ikeda <ikedamsh@oss.nttdata.com>
Reviewed-By: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wz=PKR6rB7qbx+Vnd7eqeB5VTcrW=iJvAsTsKbdG+kW_UA@mail.gmail.com
Discussion: https://postgr.es/m/CAH2-WzkRqvaqR2CTNqTZP0z6FuL4-3ED6eQB0yx38XBNj1v-4Q@mail.gmail.com
The usual pattern for handling a signal is that the signal handler
sets a flag and calls SetLatch(MyLatch), and CHECK_FOR_INTERRUPTS() or
other code that is part of a wait loop calls another function to deal
with it. The naming of the functions involved was a bit inconsistent,
however. CHECK_FOR_INTERRUPTS() calls ProcessInterrupts() to do the
heavy-lifting, but the analogous functions in aux processes were
called HandleMainLoopInterrupts(), HandleStartupProcInterrupts(),
etc. Similarly, most subroutines of ProcessInterrupts() were called
Process*(), but some were called Handle*().
To make things less confusing, rename all the functions that are part
of the overall signal/interrupt handling system but are not executed
in a signal handler to e.g. ProcessSomething(), rather than
HandleSomething(). The "Process" prefix is now consistently used in
the non-signal-handler functions, and the "Handle" prefix in functions
that are part of signal handlers, except for some completely unrelated
functions that clearly have nothing to do with signal or interrupt
handling.
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Discussion: https://www.postgresql.org/message-id/8a384b26-1499-41f6-be33-64b801fb98b8@iki.fi
This allows to redefine an existing non-inheritable constraint to be
inheritable, which allows to straighten up situations with NO INHERIT
constraints so that thay can become normal constraints without having to
re-verify existing data. For existing inheritance children this may
require creating additional constraints, if they don't exist already.
It also allows to do the opposite, if only for symmetry.
Author: Suraj Kharage <suraj.kharage@enterprisedb.com>
Reviewed-by: jian he <jian.universality@gmail.com>
Discussion: https://postgr.es/m/CAF1DzPVfOW6Kk=7SSh7LbneQDJWh=PbJrEC_Wkzc24tHOyQWGg@mail.gmail.com
The FP_LOCK_SLOTS_PER_BACKEND macro looks like a constant, but it
depends on the max_locks_per_transaction GUC, and thus can change. This
is non-obvious and confusing, so make it look more like a function by
renaming it to FastPathLockSlotsPerBackend().
While at it, use the macro when initializing fast-path shared memory,
instead of using the formula.
Reported-by: Andres Freund
Discussion: https://postgr.es/m/ffiwtzc6vedo6wb4gbwelon5nefqg675t5c7an2ta7pcz646cg%40qwmkdb3l4ett
pgstat_bestart(), used post-authentication to set up a backend entry
in the PgBackendStatus array, so as its data becomes visible in
pg_stat_activity and related catalogs, has its logic divided into three
routines with this commit, called in order at different steps of the
backend initialization:
* pgstat_bestart_initial() sets up the backend entry with a minimal
amount of information, reporting it with a new BackendState called
STATE_STARTING while waiting for backend initialization and client
authentication to complete. The main benefit that this offers is
observability, so as it is possible to monitor the backend activity
during authentication. This step happens earlier than in the logic
prior to this commit. pgstat_beinit() happens earlier as well, before
authentication.
* pgstat_bestart_security() reports the SSL/GSS status of the
connection, once authentication completes. Auxiliary processes, for
example, do not need to call this step, hence it is optional. This
step is called after performing authentication, same as previously.
* pgstat_bestart_final() reports the user and database IDs, takes the
entry out of STATE_STARTING, and reports its application_name. This is
called as the last step of the three, once authentication completes.
An injection point is added, with a test checking that the "starting"
phase of a backend entry is visible in pg_stat_activity. Some follow-up
patches are planned to take advantage of this refactoring with more
information provided in backend entries during authentication (LDAP
hanging was a problem for the author, initially).
Author: Jacob Champion <jacob.champion@enterprisedb.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CAOYmi+=60deN20WDyCoHCiecgivJxr=98s7s7-C8SkXwrCfHXg@mail.gmail.com
StoreAttrDefault() is no longer responsible for filling
attmissingval, so remove the code for that.
Get rid of RawColumnDefault.missingMode, too, as we no longer
need that to pass information around.
While here, clean up some sloppy coding in StoreAttrDefault(),
such as failure to use XXXGetDatum macros. These aren't bugs
but they're not good code either.
Reported-by: jian he <jian.universality@gmail.com>
Author: jian he <jian.universality@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CACJufxHFssPvkP1we7WMhPD_1kwgbG52o=kQgL+TnVoX5LOyCQ@mail.gmail.com
If a domain type has a default, adding a column of that type (without
any explicit DEFAULT clause) failed to install the domain's default
value in existing rows, instead leaving the new column null. This
is unexpected, and it used to work correctly before v11. The cause
is confusion in the atthasmissing mechanism about which default value
to install: we'd only consider installing an explicitly-specified
default, and then we'd decide that no table rewrite is needed.
To fix, take the responsibility for filling attmissingval out of
StoreAttrDefault, and instead put it into ATExecAddColumn's existing
logic that derives the correct value to fill the new column with.
Also, centralize the logic that determines the need for
default-related table rewriting there, instead of spreading it over
four or five places.
In the back branches, we'll leave the attmissingval-filling code
in StoreAttrDefault even though it's now dead, for fear that some
extension may be depending on that functionality to exist there.
A separate HEAD-only patch will clean up the now-useless code.
Reported-by: jian he <jian.universality@gmail.com>
Author: jian he <jian.universality@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CACJufxHFssPvkP1we7WMhPD_1kwgbG52o=kQgL+TnVoX5LOyCQ@mail.gmail.com
Backpatch-through: 13
Add relallfrozen, an estimate of the number of pages marked all-frozen
in the visibility map.
pg_class already has relallvisible, an estimate of the number of pages
in the relation marked all-visible in the visibility map. This is used
primarily for planning.
relallfrozen, together with relallvisible, is useful for estimating the
outstanding number of all-visible but not all-frozen pages in the
relation for the purposes of scheduling manual VACUUMs and tuning vacuum
freeze parameters.
A future commit will use relallfrozen to trigger more frequent vacuums
on insert-focused workloads with significant volume of frozen data.
Bump catalog version
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Robert Treat <rob@xzilla.net>
Reviewed-by: Corey Huinker <corey.huinker@gmail.com>
Reviewed-by: Greg Sabino Mullane <htamfids@gmail.com>
Discussion: https://postgr.es/m/flat/CAAKRu_aj-P7YyBz_cPNwztz6ohP%2BvWis%3Diz3YcomkB3NpYA--w%40mail.gmail.com
Allow using parallel workers to build a GIN index, similarly to BTREE
and BRIN. For large tables this may result in significant speedup when
the build is CPU-bound.
The work is divided so that each worker builds index entries on a subset
of the table, determined by the regular parallel scan used to read the
data. Each worker uses a local tuplesort to sort and merge the entries
for the same key. The TID lists do not overlap (for a given key), which
means the merge sort simply concatenates the two lists. The merged
entries are written into a shared tuplesort for the leader.
The leader needs to merge the sorted entries again, before writing them
into the index. But this way a significant part of the work happens in
the workers, and the leader is left with merging fewer large entries,
which is more efficient.
Most of the parallelism infrastructure is a simplified copy of the code
used by BTREE indexes, omitting the parts irrelevant for GIN indexes
(e.g. uniqueness checks).
Original patch by me, with reviews and substantial improvements by
Matthias van de Meent, certainly enough to make him a co-author.
Author: Tomas Vondra, Matthias van de Meent
Reviewed-by: Matthias van de Meent, Andy Fan, Kirill Reshke
Discussion: https://postgr.es/m/6ab4003f-a8b8-4d75-a67f-f25ad98582dc%40enterprisedb.com
Commit 7717f63006 removed NextCopyFromRawFields() from copy.h. While
it was hoped that NextCopyFrom() could serve as an alternative,
certain use cases still require NextCopyFromRawFields(). For instance,
extensions like file_text_array_fdw, which process source data with an
unknown number of columns, rely on this function.
Per buildfarm member crake.
Reported-by: Andrew Dunstan <andrew@dunslane.net>
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Reviewed-by: Sutou Kouhei <kou@clear-code.com>
Discussion: https://postgr.es/m/5c7e1ac8-5083-4c08-af19-cb9ade2f16ce@dunslane.net
This commit introduces a new CopyFromRoutine struct, which is a set of
callback routines to read tuples in a specific format. It also makes
COPY FROM with the existing formats (text, CSV, and binary) utilize
these format callbacks.
This change is a preliminary step towards making the COPY FROM command
extensible in terms of input formats.
Similar to 2e4127b6d2, this refactoring contributes to a performance
improvement by reducing the number of "if" branches that need to be
checked on a per-row basis when sending field representations in text
or CSV mode. The performance benchmark results showed ~5% performance
gain in text or CSV mode.
Author: Sutou Kouhei <kou@clear-code.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Reviewed-by: Junwang Zhao <zhjwpku@gmail.com>
Discussion: https://postgr.es/m/20231204.153548.2126325458835528809.kou@clear-code.com
As per a suggestion from Tom Lane, we do this by declaring "struct
ExplainState" here and refer to that rather than "ExplainState".
Also per Tom, CreateExplainSerializeDestReceiver was still defined
in explain.h in addition to explain_dr.h. Remove leftover prototype.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: http://postgr.es/m/CA+TgmoYtaad3i21V0jqua-fbr+CR0ix6uBvEX8_s6BG96abd=g@mail.gmail.com
This code is extracted from pg_stat_get_backend_io() in pgstatfuncs.c,
so as it can be shared with other areas that need backend pgstats
entries while having the benefits of the various sanity checks
refactored here. As per its name, this retrieves backend statistics
based on a PID, with the option of retrieving a BackendType if given in
input.
Currently, this is used for the backend-level IO statistics. The next
move would be to reuse that for the backend-level WAL statistics.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/Z3zqc4o09dM/Ezyz@ip-10-97-1-34.eu-west-3.compute.internal
This commit introduces a new CopyToRoutine struct, which is a set of
callback routines to copy tuples in a specific format. It also makes
the existing formats (text, CSV, and binary) utilize these format
callbacks.
This change is a preliminary step towards making the COPY TO command
extensible in terms of output formats.
Additionally, this refactoring contributes to a performance
improvement by reducing the number of "if" branches that need to be
checked on a per-row basis when sending field representations in text
or CSV mode. The performance benchmark results showed ~5% performance
gain in text or CSV mode.
Author: Sutou Kouhei <kou@clear-code.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Reviewed-by: Junwang Zhao <zhjwpku@gmail.com>
Discussion: https://postgr.es/m/20231204.153548.2126325458835528809.kou@clear-code.com
explain.c has grown rather large, and the code that deals with the
DestReceiver that supports the SERIALIZE option is pretty easily severable
from the rest of explain.c; hence, move it to a separate file.
Reviewed-by: Peter Geoghegan <pg@bowt.ie>
Discussion: http://postgr.es/m/CA+TgmoYutMw1Jgo8BWUmB3TqnOhsEAJiYO=rOQufF4gPLWmkLQ@mail.gmail.com
explain.c has grown rather large, so move various functions that
are principally concerned with output generation to a new source
file, explain_format.c, instead of lumping them in with everything
else that is part of explain.c
Reviewed-by: Peter Geoghegan <pg@bowt.ie>
Discussion: http://postgr.es/m/CA+TgmoYutMw1Jgo8BWUmB3TqnOhsEAJiYO=rOQufF4gPLWmkLQ@mail.gmail.com
Stop comparing access method OID values against HASH_AM_OID and
BTREE_AM_OID, and instead check the IndexAmRoutine for an index to see
if it advertises its ability to perform the necessary ordering,
hashing, or cross-type comparing functionality. A field amcanorder
already existed, this uses it more widely. Fields amcanhash and
amcancrosscompare are added for the other purposes.
Author: Mark Dilger <mark.dilger@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/E72EAA49-354D-4C2E-8EB9-255197F55330@enterprisedb.com
pgbench wants to record the starting line number of each command
in its scripts. It was computing that by scanning from the script
start and counting newlines, so that O(N^2) work had to be done
for an N-command script. In a script with 50K lines, this adds
up to about 10 seconds on my machine.
To add insult to injury, the results were subtly wrong, because
expr_scanner_offset() scanned to find the NUL that flex inserts
at the end of the current token --- and before the first yylex
call, no such NUL has been inserted. So we ended by computing the
script's last line number not its first one. This was visible only
in case of \gset at the start of a script, which perhaps accounts
for the lack of complaints.
To fix, steal an idea from plpgsql and track the current lexer
ending position and line count as we advance through the script.
(It's a bit simpler than plpgsql since we can't need to back up.)
Also adjust a couple of other places that were invoking scans
from script start when they didn't really need to. I made a new
psqlscan function psql_scan_get_location() that replaces both
expr_scanner_offset() and expr_scanner_get_lineno(), since in
practice expr_scanner_get_lineno() was only being invoked to find
the line number of the current lexer end position.
Reported-by: Daniel Vérité <daniel@manitou-mail.org>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/84a8a89e-adb8-47a9-9d34-c13f7150ee45@manitou-mail.org
This new structure contains the counters and the data related to the WAL
activity statistics gathered from WalUsage, separated into its own
structure so as it can be shared across more than one Stats structure in
pg_stat.h.
This refactoring will be used by an upcoming patch introducing
backend-level WAL statistics.
Bump PGSTAT_FILE_FORMAT_ID.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/Z3zqc4o09dM/Ezyz@ip-10-97-1-34.eu-west-3.compute.internal
All the processes that generate WAL should call pgstat_report_wal() to
report all their statistics related to WAL, and this is already what
happens in the tree. Keeping pgstat_report_wal() is confusing while the
other routine is encouraged.
This routine is not required since fc415edf8c, where it was lastly
used in pgstat_report_stat() before an equivalent callback existed.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/Z71oPkJJICrRB5Ws@paquier.xyz
This commit is a rework of 2421e9a51d, about which Andres Freund has
raised some concerns as it is valuable to have both track_io_timing and
track_wal_io_timing in some cases, as the WAL write and fsync paths can
be a major bottleneck for some workloads. Hence, it can be relevant to
not calculate the WAL timings in environments where pg_test_timing
performs poorly while capturing some IO data under track_io_timing for
the non-WAL IO paths. The opposite can be also true: it should be
possible to disable the non-WAL timings and enable the WAL timings (the
previous GUC setups allowed this possibility).
track_wal_io_timing is added back in this commit, controlling if WAL
timings should be calculated in pg_stat_io for the read, fsync and write
paths, as done previously with pg_stat_wal. pg_stat_wal previously
tracked only the sync and write parts (now removed), read stats is new
data tracked in pg_stat_io, all three are aggregated if
track_wal_io_timing is enabled. The read part matters during recovery
or if a XLogReader is used.
Extra note: more control over if the types of timings calculated in
pg_stat_io could be done with a GUC that lists pairs of (IOObject,IOOp).
Reported-by: Andres Freund <andres@anarazel.de>
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Co-authored-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/3opf2wh2oljco6ldyqf7ukabw3jijnnhno6fjb4mlu6civ5h24@fcwmhsgmlmzu
After commit f3dae2ae58, the primary purpose of separating the
pg_set_*_stats() from the pg_restore_*_stats() variants was
eliminated.
Leave pg_restore_relation_stats() and pg_restore_attribute_stats(),
which satisfy both purposes, and remove pg_set_relation_stats() and
pg_set_attribute_stats().
Reviewed-by: Corey Huinker <corey.huinker@gmail.com>
Discussion: https://postgr.es/m/1457469.1740419458@sss.pgh.pa.us
For AIO, and also some other recent patches, we need the ability to call
relpath() in a critical section. Until now that was not feasible, as it
allocated memory.
The fact that relpath() allocated memory also made it awkward to use in log
messages because we had to take care to free the memory afterwards. Which we
e.g. didn't do for when zeroing out an invalid buffer.
We discussed other solutions, e.g. filling a pre-allocated buffer that's
passed to relpath(), but they all came with plenty downsides or were larger
projects. The easiest fix seems to be to make relpath() return the path by
value.
To be able to return the path by value we need to determine the maximum length
of a relation path. This patch adds a long #define that computes the exact
maximum, which is verified to be correct in a regression test.
As this change the signature of relpath(), extensions using it will need to
adapt their code. We discussed leaving a backward-compat shim in place, but
decided it's not worth it given the use of relpath() doesn't seem widespread.
Discussion: https://postgr.es/m/xeri5mla4b5syjd5a25nok5iez2kr3bm26j2qn4u7okzof2bmf@kwdh2vf7npra
The callback functions ReplaceVarsFromTargetList_callback and
pullup_replace_vars_callback are both used to replace Vars in an
expression tree that reference a particular RTE with items from a
targetlist, and they both need to expand whole-tuple references and
deal with OLD/NEW RETURNING list Vars. As a result, currently there
is significant code duplication between these two functions.
This patch introduces a new function, ReplaceVarFromTargetList, to
perform the replacement and calls it from both callback functions,
thereby eliminating code duplication.
Author: Dean Rasheed <dean.a.rasheed@gmail.com>
Author: Richard Guo <guofenglinux@gmail.com>
Reviewed-by: Jian He <jian.universality@gmail.com>
Discussion: https://postgr.es/m/CAEZATCWhr=FM4X5kCPvVs-g2XEk+ceLsNtBK_zZMkqFn9vUjsw@mail.gmail.com
Commit 83ea6c540 added support for virtual generated columns that are
computed on read. All Var nodes in the query that reference virtual
generated columns must be replaced with the corresponding generation
expressions. Currently, this replacement occurs in the rewriter.
However, this approach has several issues. If a Var referencing a
virtual generated column has any varnullingrels, those varnullingrels
need to be propagated into the generation expression. Failing to do
so can lead to "wrong varnullingrels" errors and improper outer-join
removal.
Additionally, if such a Var comes from the nullable side of an outer
join, we may need to wrap the generation expression in a
PlaceHolderVar to ensure that it is evaluated at the right place and
hence is forced to null when the outer join should do so. In certain
cases, such as when the query uses grouping sets, we also need a
PlaceHolderVar for anything that is not a simple Var to isolate
subexpressions. Failure to do so can result in incorrect results.
To fix these issues, this patch expands the virtual generated columns
in the planner rather than in the rewriter, and leverages the
pullup_replace_vars architecture to avoid code duplication. The
generation expressions will be correctly marked with nullingrel bits
and wrapped in PlaceHolderVars when needed by the pullup_replace_vars
callback function. This requires handling the OLD/NEW RETURNING list
Vars in pullup_replace_vars_callback, as it may now deal with Vars
referencing the result relation instead of a subquery.
The "wrong varnullingrels" error was reported by Alexander Lakhin.
The incorrect result issue and the improper outer-join removal issue
were reported by Richard Guo.
Author: Richard Guo <guofenglinux@gmail.com>
Author: Dean Rasheed <dean.a.rasheed@gmail.com>
Reviewed-by: Jian He <jian.universality@gmail.com>
Discussion: https://postgr.es/m/75eb1a6f-d59f-42e6-8a78-124ee808cda7@gmail.com
Pages from the bitmap created by the TIDBitmap API can be exact or
lossy. The TIDBitmap API extracts the tuple offsets from exact pages
into an array for the convenience of the caller.
This was done in tbm_private|shared_iterate() right after advancing the
iterator. However, as long as tbm_private|shared_iterate() set a
reference to the PagetableEntry in the TBMIterateResult, the offset
extraction can be done later.
Waiting to extract the tuple offsets has a few benefits. For the shared
iterator case, it allows us to extract the offsets after dropping the
shared iterator state lock, reducing time spent holding a contended
lock.
Separating the iteration step and extracting the offsets later also
allows us to avoid extracting the offsets for prefetched blocks. Those
offsets were never used, so the overhead of extracting and storing them
was wasted.
The real motivation for this change, however, is that future commits
will make bitmap heap scan use the read stream API. This requires a
TBMIterateResult per issued block. By removing the array of tuple
offsets from the TBMIterateResult and only extracting the offsets when
they are used, we reduce the memory required for per buffer data
substantially.
Suggested-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKGLHbKP3jwJ6_%2BhnGi37Pw3BD5j2amjV3oSk7j-KyCnY7Q%40mail.gmail.com
This comment mentions that we check that the configured number of
backends does not exceed MAX_BACKENDS in RegisterBackgroundWorker()
and relevant GUC check hooks, neither of which has those checks
anymore. To fix, adjust this comment to say that we do the check
in InitializeMaxBackends().
Oversights in commits 6bc8ef0b7f and 0b1fe1413e.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/Z7zOEzz8lNjaU9yf%40nathan
MAX_BACKENDS influences many things besides postmaster. I e.g. noticed that we
don't have static assertions ensuring BUF_REFCOUNT_MASK is big enough for
MAX_BACKENDS, adding them would require including postmaster.h in
buf_internals.h which doesn't seem right.
While at that, add MAX_BACKENDS_BITS, as that's useful in various places for
static assertions (to be added in subsequent commits).
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/wptizm4qt6yikgm2pt52xzyv6ycmqiutloyvypvmagn7xvqkce@d4xuv3mylpg4
Due to misunderstanding on my part, commit 235328ee4 did not go far
enough to silence older versions of Valgrind. For those, it was the bit
scan that was problematic, not the subsequent bit-masking operation. To
fix, use the unaligned path for the trailing bytes. Since we don't have
a bit scan here anymore, also remove some comments and endian-specific
coding around that.
Reported-by: Anton A. Melnikov <a.melnikov@postgrespro.ru>
Discussion: https://postgr.es/m/f3aa2d45-3b28-41c5-9499-a1bc30e0f8ec@postgrespro.ru
Backpatch-through: 17
The four following attributes are removed from pg_stat_wal:
* wal_write
* wal_sync
* wal_write_time
* wal_sync_time
a051e71e28 has added an equivalent of this information in pg_stat_io
with more granularity as this now spreads across the backend types, IO
context and IO objects. So, keeping the same information in pg_stat_wal
has little benefits.
Another benefit of this commit is the removal of PendingWalStats,
simplifying an upcoming patch to add per-backend WAL statistics, which
already support IO statistics and which have access to the write/sync
stats data of WAL.
The GUC track_wal_io_timing, that was used to enable or disable the
aggregation of the write and sync timings for WAL, is also removed.
pgstat_prepare_io_time() is simplified.
Bump catalog version.
Bump PGSTAT_FILE_FORMAT_ID, due to the update of PgStat_WalStats.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/Z7RkQ0EfYaqqjgz/@ip-10-97-1-34.eu-west-3.compute.internal
To implement AIO writes, the backend initiating writes needs to transfer the
lock ownership to the AIO subsystem, so the lock held during the write can be
released in another backend.
Other backends need to be able to "complete" an asynchronously started IO to
avoid deadlocks (consider e.g. one backend starting IO for a buffer and then
waiting for a heavyweight lock held by another relation followed by the
current holder of the heavyweight lock waiting for the IO to complete).
To that end, this commit adds LWLockDisown() and LWLockReleaseDisowned(). If
code uses LWLockDisown() it's the code's responsibility to ensure that the
lock is released in case of errors.
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/1f6b50a7-38ef-4d87-8246-786d39f46ab9@iki.fi
The signedness of the 'char' type in C is
implementation-dependent. For instance, 'signed char' is used by
default on x86 CPUs, while 'unsigned char' is used on aarch
CPUs. Previously, we accidentally let C implementation signedness
affect persistent data. This led to inconsistent results when
comparing char data across different platforms.
This commit introduces a new 'default_char_signedness' field in
ControlFileData to store the signedness of the 'char' type. While this
change does not encourage the use of 'char' without explicitly
specifying its signedness, this field can be used as a hint to ensure
consistent behavior for pre-v18 data files that store data sorted by
the 'char' type on disk (e.g., GIN and GiST indexes), especially in
cross-platform replication scenarios.
Newly created database clusters unconditionally set the default char
signedness to true. pg_upgrade (with an upcoming commit) changes this
flag for clusters if the source database cluster has
signedness=false. As a result, signedness=false setting will become
rare over time. If we had known about the problem during the last
development cycle that forced initdb (v8.3), we would have made all
clusters signed or all clusters unsigned. Making pg_upgrade the only
source of signedness=false will cause the population of database
clusters to converge toward that retrospective ideal.
Bump catalog version (for the catalog changes) and PG_CONTROL_VERSION
(for the additions in ControlFileData).
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/CB11ADBC-0C3F-4FE0-A678-666EE80CBB07%40amazon.com
The type argument wasn't actually really necessary. It was a remnant
of converting the API of the gist strategy translation from using
opclass to using opfamily+opcintype (commits c09e5a6a01,
622f678c10). For looking up the gist translation function, we used
the convention "amproclefttype = amprocrighttype = opclass's
opcintype" (see pg_amproc.h). But each operator family should only
have one translation function, and getting the right type for the
lookup is sometimes cumbersome and fragile, so this is all
unnecessarily complicated.
To simplify this, change the gist stategy support procedure to take
"any", "any" as argument. (This is arbitrary but seems intuitive.
The alternative of using InvalidOid as argument(s) upsets various DDL
commands, so it's not practical.) Then we don't need opcintype for
the lookup, and we can remove it from all the API layers introduced by
commit c09e5a6a01.
This also adds some more documentation about the correct signature of
the gist support function and adds more checks in gistvalidate().
This was previously underspecified. (It relied implicitly on
convention mentioned above.)
Discussion: https://www.postgresql.org/message-id/flat/E72EAA49-354D-4C2E-8EB9-255197F55330@enterprisedb.com
This commit implements OAUTHBEARER, RFC 7628, and OAuth 2.0 Device
Authorization Grants, RFC 8628. In order to use this there is a
new pg_hba auth method called oauth. When speaking to a OAuth-
enabled server, it looks a bit like this:
$ psql 'host=example.org oauth_issuer=... oauth_client_id=...'
Visit https://oauth.example.org/login and enter the code: FPQ2-M4BG
Device authorization is currently the only supported flow so the
OAuth issuer must support that in order for users to authenticate.
Third-party clients may however extend this and provide their own
flows. The built-in device authorization flow is currently not
supported on Windows.
In order for validation to happen server side a new framework for
plugging in OAuth validation modules is added. As validation is
implementation specific, with no default specified in the standard,
PostgreSQL does not ship with one built-in. Each pg_hba entry can
specify a specific validator or be left blank for the validator
installed as default.
This adds a requirement on libcurl for the client side support,
which is optional to build, but the server side has no additional
build requirements. In order to run the tests, Python is required
as this adds a https server written in Python. Tests are gated
behind PG_TEST_EXTRA as they open ports.
This patch has been a multi-year project with many contributors
involved with reviews and in-depth discussions: Michael Paquier,
Heikki Linnakangas, Zhihong Yu, Mahendrakar Srinivasarao, Andrey
Chudnovsky and Stephen Frost to name a few. While Jacob Champion
is the main author there have been some levels of hacking by others.
Daniel Gustafsson contributed the validation module and various bits
and pieces; Thomas Munro wrote the client side support for kqueue.
Author: Jacob Champion <jacob.champion@enterprisedb.com>
Co-authored-by: Daniel Gustafsson <daniel@yesql.se>
Co-authored-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Antonin Houska <ah@cybertec.at>
Reviewed-by: Kashif Zeeshan <kashi.zeeshan@gmail.com>
Discussion: https://postgr.es/m/d1b467a78e0e36ed85a09adf979d04cf124a9d4b.camel@vmware.com
Before executing a cached generic plan, AcquireExecutorLocks() in
plancache.c locks all relations in a plan's range table to ensure the
plan is safe for execution. However, this locks runtime-prunable
relations that will later be pruned during "initial" runtime pruning,
introducing unnecessary overhead.
This commit defers locking for such relations to executor startup and
ensures that if the CachedPlan is invalidated due to concurrent DDL
during this window, replanning is triggered. Deferring these locks
avoids unnecessary locking overhead for pruned partitions, resulting
in significant speedup, particularly when many partitions are pruned
during initial runtime pruning.
* Changes to locking when executing generic plans:
AcquireExecutorLocks() now locks only unprunable relations, that is,
those found in PlannedStmt.unprunableRelids (introduced in commit
cbc127917e), to avoid locking runtime-prunable partitions
unnecessarily. The remaining locks are taken by
ExecDoInitialPruning(), which acquires them only for partitions that
survive pruning.
This deferral does not affect the locks required for permission
checking in InitPlan(), which takes place before initial pruning.
ExecCheckPermissions() now includes an Assert to verify that all
relations undergoing permission checks, none of which can be in the
set of runtime-prunable relations, are properly locked.
* Plan invalidation handling:
Deferring locks introduces a window where prunable relations may be
altered by concurrent DDL, invalidating the plan. A new function,
ExecutorStartCachedPlan(), wraps ExecutorStart() to detect and handle
invalidation caused by deferred locking. If invalidation occurs,
ExecutorStartCachedPlan() updates CachedPlan using the new
UpdateCachedPlan() function and retries execution with the updated
plan. To ensure all code paths that may be affected by this handle
invalidation properly, all callers of ExecutorStart that may execute a
PlannedStmt from a CachedPlan have been updated to use
ExecutorStartCachedPlan() instead.
UpdateCachedPlan() replaces stale plans in CachedPlan.stmt_list. A new
CachedPlan.stmt_context, created as a child of CachedPlan.context,
allows freeing old PlannedStmts while preserving the CachedPlan
structure and its statement list. This ensures that loops over
statements in upstream callers of ExecutorStartCachedPlan() remain
intact.
ExecutorStart() and ExecutorStart_hook implementations now return a
boolean value indicating whether plan initialization succeeded with a
valid PlanState tree in QueryDesc.planstate, or false otherwise, in
which case QueryDesc.planstate is NULL. Hook implementations are
required to call standard_ExecutorStart() at the beginning, and if it
returns false, they should do the same without proceeding.
* Testing:
To verify these changes, the delay_execution module tests scenarios
where cached plans become invalid due to changes in prunable relations
after deferred locks.
* Note to extension authors:
ExecutorStart_hook implementations must verify plan validity after
calling standard_ExecutorStart(), as explained earlier. For example:
if (prev_ExecutorStart)
plan_valid = prev_ExecutorStart(queryDesc, eflags);
else
plan_valid = standard_ExecutorStart(queryDesc, eflags);
if (!plan_valid)
return false;
<extension-code>
return true;
Extensions accessing child relations, especially prunable partitions,
via ExecGetRangeTableRelation() must now ensure their RT indexes are
present in es_unpruned_relids (introduced in commit cbc127917e), or
they will encounter an error. This is a strict requirement after this
change, as only relations in that set are locked.
The idea of deferring some locks to executor startup, allowing locks
for prunable partitions to be skipped, was first proposed by Tom Lane.
Reviewed-by: Robert Haas <robertmhaas@gmail.com> (earlier versions)
Reviewed-by: David Rowley <dgrowleyml@gmail.com> (earlier versions)
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us> (earlier versions)
Reviewed-by: Tomas Vondra <tomas@vondra.me>
Reviewed-by: Junwang Zhao <zhjwpku@gmail.com>
Discussion: https://postgr.es/m/CA+HiwqFGkMSge6TgC9KQzde0ohpAycLQuV7ooitEEpbKB0O_mg@mail.gmail.com
Replace the use of Constraint with a new ATAlterConstraint struct, which
allows us to pass additional information. No functionality is added by
this commit. This is necessary for future work that allows altering
constraints in other ways.
I (Álvaro) took the liberty of restructuring the code for ALTER
CONSTRAINT beyond what Amul did. The original coding before Amul's
patch was unnecessarily baroque, and this change makes things simpler
by removing one level of subroutine. Also, partly remove the assumption
that only partitioned tables are relevant (by passing sensible 'recurse'
arguments) and no longer ignore whether ONLY was specified. I say
'partly' because the current coding only walks down via the 'conparentid'
relationship, which is only used for partitioned tables; but future
patches could handle ONLY or not for other types of constraint changes
for legacy inheritance trees too.
Author: Amul Sul <sulamul@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/CAAJ_b94bfgPV-8Mw_HwSBeheVwaK9=5s+7+KbBj_NpwXQFgDGg@mail.gmail.com
