Per buildfarm, the output order of \dx+ isn't consistent across
locales. Apply NO_LOCALE to force C locale. There might be a
more localized way, but I'm not seeing it offhand, and anyway
there is nothing in this test module that particularly cares
about locales.
Security: CVE-2022-2625
Previously, if an extension script did CREATE OR REPLACE and there was
an existing object not belonging to the extension, it would overwrite
the object and adopt it into the extension. This is problematic, first
because the overwrite is probably unintentional, and second because we
didn't change the object's ownership. Thus a hostile user could create
an object in advance of an expected CREATE EXTENSION command, and would
then have ownership rights on an extension object, which could be
modified for trojan-horse-type attacks.
Hence, forbid CREATE OR REPLACE of an existing object unless it already
belongs to the extension. (Note that we've always forbidden replacing
an object that belongs to some other extension; only the behavior for
previously-free-standing objects changes here.)
For the same reason, also fail CREATE IF NOT EXISTS when there is
an existing object that doesn't belong to the extension.
Our thanks to Sven Klemm for reporting this problem.
Security: CVE-2022-2625
The sto_using_cursor and sto_using_select tests were coded to exercise
every permutation of their test steps, but AFAICS there is no value in
exercising more than one. This matters because each permutation costs
about six seconds, thanks to the "pg_sleep(6)". Perhaps we could
reduce that, but the useless permutations seem worth getting rid of
in any case. (Note that sto_using_hash_index got it right already.)
While here, clean up some other sloppiness such as an unused table.
This doesn't make too much difference in interactive testing, since the
wasted time is typically masked by parallelization with other tests.
However, the buildfarm runs this as a serial step, which means we can
expect to shave ~40 seconds from every buildfarm run. That makes it
worth back-patching.
Discussion: https://postgr.es/m/2515192.1659454702@sss.pgh.pa.us
When an implicit operator family is created, it wasn't getting reported.
Make it do so.
This has always been missing. Backpatch to 10.
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Reported-by: Leslie LEMAIRE <leslie.lemaire@developpement-durable.gouv.fr>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Michael Paquiër <michael@paquier.xyz>
Discussion: https://postgr.es/m/f74d69e151b22171e8829551b1159e77@developpement-durable.gouv.fr
The error messages using the word "non-negative" are confusing
because it's ambiguous about whether it accepts zero or not.
This commit improves those error messages by replacing it with
less ambiguous word like "greater than zero" or
"greater than or equal to zero".
Also this commit added the note about the word "non-negative" to
the error message style guide, to help writing the new error messages.
When postgres_fdw option fetch_size was set to zero, previously
the error message "fetch_size requires a non-negative integer value"
was reported. This error message was outright buggy. Therefore
back-patch to all supported versions where such buggy error message
could be thrown.
Reported-by: Hou Zhijie
Author: Bharath Rupireddy
Reviewed-by: Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/OS0PR01MB5716415335A06B489F1B3A8194569@OS0PR01MB5716.jpnprd01.prod.outlook.com
Previously, isolationtester displayed SQL query results using some
ad-hoc code that clearly hadn't had much effort expended on it.
Field values longer than 14 characters weren't separated from
the next field, and usually caused misalignment of the columns
too. Also there was no visual separation of a query's result
from subsequent isolationtester output. This made test result
files confusing and hard to read.
To improve matters, let's use libpq's PQprint() function. Although
that's long since unused by psql, it's still plenty good enough
for the purpose here.
Like 741d7f104, back-patch to all supported branches, so that this
isn't a stumbling block for back-patching isolation test changes.
Discussion: https://postgr.es/m/582362.1623798221@sss.pgh.pa.us
The context is an object that no longer bears some aclitem that it bore
initially. (A user issued REVOKE or GRANT statements upon the object.)
pg_dump is forming SQL to reproduce the object ACL. Since initdb
creates no ACL bearing GRANT OPTION, reaching this bug requires an
extension where the creation script establishes such an ACL. No PGXN
extension does that. If an installation did reach the bug, pg_dump
would have omitted a semicolon, causing a REVOKE and the next SQL
statement to fail. Separately, since the affected code exists to
eliminate an entire aclitem, it wants plain REVOKE, not REVOKE GRANT
OPTION FOR. Back-patch to 9.6, where commit
23f34fa4ba first appeared.
Discussion: https://postgr.es/m/20210109102423.GA160022@rfd.leadboat.com
Commit 3eb3d3e78 was a few bricks shy of a load: while it correctly
set the table's "interesting" flag when deciding to dump the data of
an extension config table, it was not correct to clear that flag
if we concluded we shouldn't dump the data. This led to the crash
reported in bug #16655, because in fact we'll traverse dumpTableSchema
anyway for all extension tables (to see if they have user-added
seclabels or RLS policies).
The right thing to do is to force "interesting" true in makeTableDataInfo,
and otherwise leave the flag alone. (Doing it there is more future-proof
in case additional calls are added, and it also avoids setting the flag
unnecessarily if that function decides the table is non-dumpable.)
This investigation also showed that while only the --inserts code path
had an obvious failure in the case considered by 3eb3d3e78, the COPY
code path also has a problem with not having loaded table subsidiary
data. That causes fmtCopyColumnList to silently return an empty string
instead of the correct column list. That accidentally mostly works,
which perhaps is why we didn't notice this before. It would only fail
if the restore column order is different from the dump column order,
which only happens in weird inheritance cases, so it's not surprising
nobody had hit the case with an extension config table. Nonetheless,
it's a bug, and it goes a long way back, not just to v12 where the
--inserts code path started to have a problem with this.
In hopes of catching such cases a bit sooner in future, add some
Asserts that "interesting" has been set in both dumpTableData and
dumpTableSchema. Adjust the test case added by 3eb3d3e78 so that it
checks the COPY rather than INSERT form of that bug, allowing it to
detect the longer-standing symptom.
Per bug #16655 from Cameron Daniel. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/16655-5c92d6b3a9438137@postgresql.org
Discussion: https://postgr.es/m/18048b44-3414-b983-8c7c-9165b177900d@2ndQuadrant.com
ALTER TABLE commands in an extension script are added to an event
trigger command list; but starting with commit b5810de3f4 they do so in
a memory context that's too short-lived, so when execution ends and time
comes to use the entries, they've already been freed.
(This would also be a problem with ALTER TABLE commands in a
multi-command query string, but these serendipitously end in
PortalContext -- which probably explains why it took so long for this to
be reported.)
Fix by using the memory context specifically set for that, instead.
Backpatch to 13, where the aforementioned commit appeared.
Reported-by: Philippe Beaudoin
Author: Jehan-Guillaume de Rorthais <jgdr@dalibo.com>
Discussion: https://postgr.es/m/20200902193715.6e0269d4@firost
If this data is not collected, pg_dump segfaults if asked for column
inserts.
Fix by Fabrízio de Royes Mello
Backpatch to release 12 where the bug was introduced.
If a CREATE TABLE command uses both LIKE and traditional inheritance,
Vars in CHECK constraints and expression indexes that are absorbed
from a LIKE parent table tended to get mis-numbered, resulting in
wrong answers and/or bizarre error messages (though probably not any
actual crashes, thanks to validation occurring in the executor).
In v12 and up, the same could happen to Vars in GENERATED expressions,
even in cases with no LIKE clause but multiple traditional-inheritance
parents.
The cause of the problem for LIKE is that parse_utilcmd.c supposed
it could renumber such Vars correctly during transformCreateStmt(),
which it cannot since we have not yet accounted for columns added via
inheritance. Fix that by postponing processing of LIKE INCLUDING
CONSTRAINTS, DEFAULTS, GENERATED, INDEXES till after we've performed
DefineRelation().
The error with GENERATED and multiple inheritance is a simple oversight
in MergeAttributes(); it knows it has to renumber Vars in inherited
CHECK constraints, but forgot to apply the same processing to inherited
GENERATED expressions (a/k/a defaults).
Per bug #16272 from Tom Gottfried. The non-GENERATED variants of the
issue are ancient, presumably dating right back to the addition of
CREATE TABLE LIKE; hence back-patch to all supported branches.
Discussion: https://postgr.es/m/16272-6e32da020e9a9381@postgresql.org
The recipe was previously given in comments in the module's test
script, but now we have an explicit recipe in the Makefile. The now
redundant comments in the script are removed.
This recipe shouldn't be needed in normal use, as the certificate and
key are in git and don't need to be regenerated.
Discussion: https://postgr.es/m/ae8f21fc-95cb-c98a-f241-1936133f466f@2ndQuadrant.com
Includes some manual cleanup of places that pgindent messed up,
most of which weren't per project style anyway.
Notably, it seems some people didn't absorb the style rules of
commit c9d297751, because there were a bunch of new occurrences
of function calls with a newline just after the left paren, all
with faulty expectations about how the rest of the call would get
indented.
Commit f2fcad27d5 (9.6 era) added the ability to mark objects as
dependent an extension, but forgot to add a way for such dependencies to
be removed. This commit fixes that oversight.
Strictly speaking this should be backpatched to 9.6, but due to lack of
demand we're not doing so at this time.
Discussion: https://postgr.es/m/20200217225333.GA30974@alvherre.pgsql
Reviewed-by: ahsan hadi <ahsan.hadi@gmail.com>
Reviewed-by: Ibrar Ahmed <ibrar.ahmad@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
recordExtObjInitPriv and removeExtObjInitPriv were sloppy about
calling ReleaseSysCache. The cases cannot occur given current usage
in ALTER EXTENSION ADD/DROP, since we wouldn't get here for these
relkinds; but it seems wise to clean up better.
In passing, extend test logic in test_pg_dump to exercise the
dropped-column code paths here.
Since the case is unreachable at present, there seems no great
need to back-patch; hence fix HEAD only.
Kyotaro Horiguchi, with test case and comment adjustments by me
Discussion: https://postgr.es/m/20200417.151831.1153577605111650154.horikyota.ntt@gmail.com
The txid_XXX family of fmgr functions exposes 64 bit transaction IDs to
users as int8. Now that we have an SQL type xid8 for FullTransactionId,
define a new set of functions including pg_current_xact_id() and
pg_current_snapshot() based on that. Keep the old functions around too,
for now.
It's a bit sneaky to use the same C functions for both, but since the
binary representation is identical except for the signedness of the
type, and since older functions are the ones using the wrong signedness,
and since we'll presumably drop the older ones after a reasonable period
of time, it seems reasonable to switch to FullTransactionId internally
and share the code for both.
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Takao Fujii <btfujiitkp@oss.nttdata.com>
Reviewed-by: Yoshikazu Imai <imai.yoshikazu@fujitsu.com>
Reviewed-by: Mark Dilger <mark.dilger@enterprisedb.com>
Discussion: https://postgr.es/m/20190725000636.666m5mad25wfbrri%40alap3.anarazel.de
The Makefile should set TAP_TESTS = 1, not implement the infrastructure
for itself. For one thing, it missed the appropriate "make clean"
steps. For another, the buildfarm isn't running this test because
it wasn't hooked into "make installcheck" either.
Commit 896fcdb230 contained an unnecessary setting that listened to
localhost. Since the test doesn't actually try to make an SSL connection
to the database this isn't required. Moreover, it's a security hole.
Per gripe from Tom Lane.
Some platforms require libssl to be linked explicitly in the new
SSL test module. Borrow contrib/sslinfo's code for that.
Since src/test/modules/Makefile now has a variable SUBDIRS list,
it needs to follow the ALWAYS_SUBDIRS protocol for that (cf.
comments in Makefile.global.in).
Blindly try to fix MSVC build failures by adding PGDLLIMPORT.
The default hook function sets the default password callback function.
In order to allow preloaded libraries to have an opportunity to override
the default, TLS initialization if now delayed slightly until after
shared preloaded libraries have been loaded.
A test module is provided which contains a trivial example that decodes
an obfuscated password for an SSL certificate.
Author: Andrew Dunstan
Reviewed By: Andreas Karlsson, Asaba Takanori
Discussion: https://postgr.es/m/04116472-818b-5859-1d74-3d995aab2252@2ndQuadrant.com
pg_dump is oblivious to this kind of dependency, so they're lost on
dump/restores (and pg_upgrade). Have pg_dump emit ALTER lines so that
they're preserved. Add some pg_dump tests for the whole thing, also.
Reviewed-by: Tom Lane (offlist)
Reviewed-by: Ibrar Ahmed
Reviewed-by: Ahsan Hadi (who also reviewed commit 899a04f5ed)
Discussion: https://postgr.es/m/20200217225333.GA30974@alvherre.pgsql
If the command is attempted for an extension that the object already
depends on, silently do nothing.
In particular, this means that if a database containing multiple such
entries is dumped, the restore will silently do the right thing and
record just the first one. (At least, in a world where pg_dump does
dump such entries -- which it doesn't currently, but it will.)
Backpatch to 9.6, where this kind of dependency was introduced.
Reviewed-by: Ibrar Ahmed, Tom Lane (offlist)
Discussion: https://postgr.es/m/20200217225333.GA30974@alvherre.pgsql
Our usual practice for "poor man's enum" catalog columns is to define
macros for the possible values and use those, not literal constants,
in C code. But for some reason lost in the mists of time, this was
never done for typalign/attalign or typstorage/attstorage. It's never
too late to make it better though, so let's do that.
The reason I got interested in this right now is the need to duplicate
some uses of the TYPSTORAGE constants in an upcoming ALTER TYPE patch.
But in general, this sort of change aids greppability and readability,
so it's a good idea even without any specific motivation.
I may have missed a few places that could be converted, and it's even
more likely that pending patches will re-introduce some hard-coded
references. But that's not fatal --- there's no expectation that
we'd actually change any of these values. We can clean up stragglers
over time.
Discussion: https://postgr.es/m/16457.1583189537@sss.pgh.pa.us
The backend was using strings to represent command tags and doing string
comparisons in multiple places, but that's slow and unhelpful. Create a
new command list with a supporting structure to use instead; this is
stored in a tag-list-file that can be tailored to specific purposes with
a caller-definable C macro, similar to what we do for WAL resource
managers. The first first such uses are a new CommandTag enum and a
CommandTagBehavior struct.
Replace numerous occurrences of char *completionTag with a
QueryCompletion struct so that the code no longer stores information
about completed queries in a cstring. Only at the last moment, in
EndCommand(), does this get converted to a string.
EventTriggerCacheItem no longer holds an array of palloc’d tag strings
in sorted order, but rather just a Bitmapset over the CommandTags.
Author: Mark Dilger, with unsolicited help from Álvaro Herrera
Reviewed-by: John Naylor, Tom Lane
Discussion: https://postgr.es/m/981A9DB4-3F0C-4DA5-88AD-CB9CFF4D6CAD@enterprisedb.com
Andres Freund pointed out that allowing non-superusers to run
"CREATE EXTENSION ... FROM unpackaged" has security risks, since
the unpackaged-to-1.0 scripts don't try to verify that the existing
objects they're modifying are what they expect. Just attaching such
objects to an extension doesn't seem too dangerous, but some of them
do more than that.
We could have resolved this, perhaps, by still requiring superuser
privilege to use the FROM option. However, it's fair to ask just what
we're accomplishing by continuing to lug the unpackaged-to-1.0 scripts
forward. None of them have received any real testing since 9.1 days,
so they may not even work anymore (even assuming that one could still
load the previous "loose" object definitions into a v13 database).
And an installation that's trying to go from pre-9.1 to v13 or later
in one jump is going to have worse compatibility problems than whether
there's a trivial way to convert their contrib modules into extension
style.
Hence, let's just drop both those scripts and the core-code support
for "CREATE EXTENSION ... FROM".
Discussion: https://postgr.es/m/20200213233015.r6rnubcvl4egdh5r@alap3.anarazel.de
We've had numerous bug reports about how (1) IF NOT EXISTS clauses in
ALTER TABLE don't behave as-expected, and (2) combining certain actions
into one ALTER TABLE doesn't work, though executing the same actions as
separate statements does. This patch cleans up all of the cases so far
reported from the field, though there are still some oddities associated
with identity columns.
The core problem behind all of these bugs is that we do parse analysis
of ALTER TABLE subcommands too soon, before starting execution of the
statement. The root of the bugs in group (1) is that parse analysis
schedules derived commands (such as a CREATE SEQUENCE for a serial
column) before it's known whether the IF NOT EXISTS clause should cause
a subcommand to be skipped. The root of the bugs in group (2) is that
earlier subcommands may change the catalog state that later subcommands
need to be parsed against.
Hence, postpone parse analysis of ALTER TABLE's subcommands, and do
that one subcommand at a time, during "phase 2" of ALTER TABLE which
is the phase that does catalog rewrites. Thus the catalog effects
of earlier subcommands are already visible when we analyze later ones.
(The sole exception is that we do parse analysis for ALTER COLUMN TYPE
subcommands during phase 1, so that their USING expressions can be
parsed against the table's original state, which is what we need.
Arguably, these bugs stem from falsely concluding that because ALTER
COLUMN TYPE must do early parse analysis, every other command subtype
can too.)
This means that ALTER TABLE itself must deal with execution of any
non-ALTER-TABLE derived statements that are generated by parse analysis.
Add a suitable entry point to utility.c to accept those recursive
calls, and create a struct to pass through the information needed by
the recursive call, rather than making the argument lists of
AlterTable() and friends even longer.
Getting this to work correctly required a little bit of fiddling
with the subcommand pass structure, in particular breaking up
AT_PASS_ADD_CONSTR into multiple passes. But otherwise it's mostly
a pretty straightforward application of the above ideas.
Fixing the residual issues for identity columns requires refactoring of
where the dependency link from an identity column to its sequence gets
set up. So that seems like suitable material for a separate patch,
especially since this one is pretty big already.
Discussion: https://postgr.es/m/10365.1558909428@sss.pgh.pa.us
Introduce new fields amusemaintenanceworkmem and amparallelvacuumoptions
in IndexAmRoutine for parallel vacuum. The amusemaintenanceworkmem tells
whether a particular IndexAM uses maintenance_work_mem or not. This will
help in controlling the memory used by individual workers as otherwise,
each worker can consume memory equal to maintenance_work_mem. The
amparallelvacuumoptions tell whether a particular IndexAM participates in
a parallel vacuum and if so in which phase (bulkdelete, vacuumcleanup) of
vacuum.
Author: Masahiko Sawada and Amit Kapila
Reviewed-by: Dilip Kumar, Amit Kapila, Tomas Vondra and Robert Haas
Discussion:
https://postgr.es/m/CAD21AoDTPMgzSkV4E3SFo1CH_x50bf5PqZFQf4jmqjk-C03BWg@mail.gmail.comhttps://postgr.es/m/CAA4eK1LmcD5aPogzwim5Nn58Ki+74a6Edghx4Wd8hAskvHaq5A@mail.gmail.com
When I added the ParseNamespaceItem data structure (in commit 5ebaaa494),
it wasn't very tightly integrated into the parser's APIs. In the wake of
adding p_rtindex to that struct (commit b541e9acc), there is a good reason
to make more use of it: by passing around ParseNamespaceItem pointers
instead of bare RTE pointers, we can get rid of various messy methods for
passing back or deducing the rangetable index of an RTE during parsing.
Hence, refactor the addRangeTableEntryXXX functions to build and return
a ParseNamespaceItem struct, not just the RTE proper; and replace
addRTEtoQuery with addNSItemToQuery, which is passed a ParseNamespaceItem
rather than building one internally.
Also, add per-column data (a ParseNamespaceColumn array) to each
ParseNamespaceItem. These arrays are built during addRangeTableEntryXXX,
where we have column type data at hand so that it's nearly free to fill
the data structure. Later, when we need to build Vars referencing RTEs,
we can use the ParseNamespaceColumn info to avoid the rather expensive
operations done in get_rte_attribute_type() or expandRTE().
get_rte_attribute_type() is indeed dead code now, so I've removed it.
This makes for a useful improvement in parse analysis speed, around 20%
in one moderately-complex test query.
The ParseNamespaceColumn structs also include Var identity information
(varno/varattno). That info isn't actually being used in this patch,
except that p_varno == 0 is a handy test for a dropped column.
A follow-on patch will make more use of it.
Discussion: https://postgr.es/m/2461.1577764221@sss.pgh.pa.us
This follows multiple complains from Peter Geoghegan, Andres Freund and
Alvaro Herrera that this issue ought to be dug more before actually
happening, if it happens.
Discussion: https://postgr.es/m/20191226144606.GA5659@alvherre.pgsql
The following renaming is done so as source files related to index
access methods are more consistent with table access methods (the
original names used for index AMs ware too generic, and could be
confused as including features related to table AMs):
- amapi.h -> indexam.h.
- amapi.c -> indexamapi.c. Here we have an equivalent with
backend/access/table/tableamapi.c.
- amvalidate.c -> indexamvalidate.c.
- amvalidate.h -> indexamvalidate.h.
- genam.c -> indexgenam.c.
- genam.h -> indexgenam.h.
This has been discussed during the development of v12 when table AM was
worked on, but the renaming never happened.
Author: Michael Paquier
Reviewed-by: Fabien Coelho, Julien Rouhaud
Discussion: https://postgr.es/m/20191223053434.GF34339@paquier.xyz
Add a regression test file that exercises the kinds of commands that
allow_system_table_mods allows.
This is put in the "unsafe_tests" suite, so it won't accidentally
create a mess if someone runs the normal regression tests against an
instance that they care about.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/8b00ea5e-28a7-88ba-e848-21528b632354%402ndquadrant.com
When maintaining or merging patches, one of the most common sources
for conflicts are the list of objects in makefiles. Especially when
the split across lines has been changed on both sides, which is
somewhat common due to attempting to stay below 80 columns, those
conflicts are unnecessarily laborious to resolve.
By splitting, and alphabetically sorting, OBJS style lines into one
object per line, conflicts should be less frequent, and easier to
resolve when they still occur.
Author: Andres Freund
Discussion: https://postgr.es/m/20191029200901.vww4idgcxv74cwes@alap3.anarazel.de
Historically, the code to build relation options has been shaped the
same way in multiple code paths by using a set of datums in input with
the options parsed with a static table which is then filled with the
option values. This introduces a new common routine in reloptions.c to
do most of the legwork for the in-core code paths.
Author: Amit Langote
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CA+HiwqGsoSn_uTPPYT19WrtR7oYpYtv4CdS0xuedTKiHHWuk_g@mail.gmail.com
The location of the session end hook has been chosen so as it is
possible to allow modules to do their own transactions, however any
trying to any any subsystem which went through before_shmem_exit()
would cause issues, limiting the pluggability of the hook.
Per discussion with Tom Lane and Andres Freund.
Discussion: https://postgr.es/m/18722.1569906636@sss.pgh.pa.us
Several buildfarm machines have been complaining about the new module
test_session_hooks to be unstable, like crake and thorntail. The issue
was that the module was trying to log some start and end session
activity for parallel workers, which makes little sense as they don't
support DML, so just prevent this pattern to happen in the module.
This could be reproduced by enforcing force_parallel_mode=regress, which
is the value used by some of the buildfarm members.
Discussion: https://postgr.es/m/20191001045246.GF2781@paquier.xyz
These hooks can be used in loadable modules. A simple test module is
included.
The first attempt was done with cd8ce3a but we lacked handling for
NO_INSTALLCHECK in the MSVC scripts (problem solved afterwards by
431f1599) so the buildfarm got angry. This also fixes a couple of
issues noticed upon review compared to the first attempt, so the code
has slightly changed, resulting in a more simple test module.
Author: Fabrízio de Royes Mello, Yugo Nagata
Reviewed-by: Andrew Dunstan, Michael Paquier, Aleksandr Parfenov
Discussion: https://postgr.es/m/20170720204733.40f2b7eb.nagata@sraoss.co.jp
Discussion: https://postgr.es/m/20190823042602.GB5275@paquier.xyz
The code was enforcing AccessExclusiveLock for all custom relation
options, which is incorrect as the APIs allow a custom lock level to be
set.
While on it, fix a couple of inconsistencies in the tests and the README
of dummy_index_am.
Oversights in commit 773df88.
Discussion: https://postgr.es/m/20190925234152.GA2115@paquier.xyz
All our current in core relation options of type string (not many,
admittedly) behave in reality like enums. But after seeing an
implementation for enum reloptions, it's clear that strings are messier,
so introduce the new reloption type. Switch all string options to be
enums instead.
Fortunately we have a recently introduced test module for reloptions, so
we don't lose coverage of string reloptions, which may still be used by
third-party modules.
Authors: Nikolay Shaplov, Álvaro Herrera
Reviewed-by: Nikita Glukhov, Aleksandr Parfenov
Discussion: https://postgr.es/m/43332102.S2V5pIjXRx@x200m
Several buildfarm members (crake, loach and spurfowl) are complaining
about two queries looking up at pg_class.reloptions which trigger the
validation routines for string reloptions with default values. This
commit limits the routines to be triggered only when building an index
with all custom options set in CREATE INDEX, which is sufficient for the
coverage.
Introduced by 640c198.
