of requirements and documentation on LogStandbySnapshot(). Fixes
two minor bugs reported by Tom Lane that would lead to an incorrect
snapshot after transaction wraparound. Also fix two other problems
discovered that would give incorrect snapshots in certain cases.
ProcArrayApplyRecoveryInfo() substantially rewritten. Some minor
refactoring of xact_redo_apply() and ExpireTreeKnownAssignedTransactionIds().
confusion with streaming-replication settings. Also, change its default
value to "off", because of concern about executing new and poorly-tested
code during ordinary non-replicating operation. Per discussion.
In passing do some minor editing of related documentation.
archival or hot standby should be WAL-logged, instead of deducing that from
other options like archive_mode. This replaces recovery_connections GUC in
the primary, where it now has no effect, but it's still used in the standby
to enable/disable hot standby.
Remove the WAL-logging of "unlogged operations", like creating an index
without WAL-logging and fsyncing it at the end. Instead, we keep a copy of
the wal_mode setting and the settings that affect how much shared memory a
hot standby server needs to track master transactions (max_connections,
max_prepared_xacts, max_locks_per_xact) in pg_control. Whenever the settings
change, at server restart, write a WAL record noting the new settings and
update pg_control. This allows us to notice the change in those settings in
the standby at the right moment, they used to be included in checkpoint
records, but that meant that a changed value was not reflected in the
standby until the first checkpoint after the change.
Bump PG_CONTROL_VERSION and XLOG_PAGE_MAGIC. Whack XLOG_PAGE_MAGIC back to
the sequence it used to follow, before hot standby and subsequent patches
changed it to 0x9003.
of parameters. Fix bug report by Robert Haas that error message and
hint was incorrect if wrong mode parameters specified on master.
Internal changes only. Proposals for parameter simplification on
master/primary still under way.
vacuum_log_cleanup_info() now generates log records with a valid
latestRemovedXid set in all cases. Also be careful not to zero the
value when we do a round of vacuuming part-way through lazy_scan_heap().
Incidentally, this reduces frequency of conflicts in Hot Standby.
database to connect to. This is necessary for the walsender code to work
properly (it was previously using an untenable assumption that template1 would
always be available to connect to). This also gets rid of a small security
shortcoming that was introduced in the original patch to eliminate the flat
authentication files: before, you could find out whether or not the requested
database existed even if you couldn't pass the authentication checks.
The changes needed to support this are mainly just to treat pg_authid and
pg_auth_members as nailed relations, so that we can read them without having
to be able to locate real pg_class entries for them. This mechanism was
already debugged for pg_database, but we hadn't recognized the value of
applying it to those catalogs too.
Since the current code doesn't have support for accessing toast tables before
we've brought up all of the relcache, remove pg_authid's toast table to ensure
that no one can store an out-of-line toasted value of rolpassword. The case
seems quite unlikely to occur in practice, and was effectively unsupported
anyway in the old "flatfiles" implementation.
Update genbki.pl to actually implement the same rules as bootstrap.c does for
not-nullability of catalog columns. The previous coding was a bit cheesy but
worked all right for the previous set of bootstrap catalogs. It does not work
for pg_authid, where rolvaliduntil needs to be nullable.
Initdb forced due to minor catalog changes (mainly the toast table removal).
Also, make the name of the GUC and the name of the backing variable match.
Alnong the way, clean up a couple of slight typographical errors in the
related docs.
The logic for determining whether to materialize has been significantly
overhauled for 9.0. In case there should be any doubt about whether
materialization is a win in any particular case, this should provide a
convenient way of seeing what happens without it; but even with enable_material
turned off, we still materialize in cases where it is required for
correctness.
Thanks to Tom Lane for the review.
through normal backends. Makes code clearer also, since we
avoid various Assert()s. Performance of snapshots taken
during recovery no longer depends upon number of read-only
backends.
after actually removing one, so that if we can't remove segments because
WAL archiving is lagging behind, we don't unnecessarily forbid streaming
the old not-yet-archived segments that are still perfectly valid. Per
suggestion from Fujii Masao.
doesn't take into account how far the WAL senders are. This way a hung
WAL sender doesn't prevent old WAL segments from being recycled/removed
in the primary, ultimately causing the disk to fill up. Instead add
standby_keep_segments setting to control how many old WAL segments are
kept in the primary. This also makes it more reliable to use streaming
replication without WAL archiving, assuming that you set
standby_keep_segments high enough.
be added during GRANT and can only be removed during REVOKE; and fix its
callers to not lie to it about the existing set of dependencies when
instantiating a formerly-default ACL. The previous coding accidentally failed
to malfunction so long as default ACLs contain only references to the object's
owning role, because that role is ignored by updateAclDependencies. However
this is obviously pretty fragile, as well as being an undocumented assumption.
The new coding is a few lines longer but IMO much clearer.
The error message now makes explicit reference to the GUC that must be changed
to fix the problem, using wording suggested by Tom Lane. Along the way,
rename the GUC from MaxWalSenders to max_wal_senders for consistency and
grep-ability.
constraint exclusion on an inheritance set that is the target of an UPDATE
or DELETE query. Per gripe from Marc Cousin. Back-patch to 8.4 where
the feature was introduced.
WAL record for btree delete contains a list of tids, even when backup
blocks are present. We follow the tids to their heap tuples, taking
care to follow LP_REDIRECT tuples. We ignore LP_DEAD tuples on the
understanding that they will always have xmin/xmax earlier than any
LP_NORMAL tuples referred to by killed index tuples. Iff all tuples
are LP_DEAD we return InvalidTransactionId. The heap relfilenode is
added to the WAL record, requiring API changes to pass down the heap
Relation. XLOG_PAGE_MAGIC updated.
by a superuser -- "ALTER USER f RESET setting" already disallows removing such a
setting.
Apply the same treatment to ALTER DATABASE d RESET ALL when run by a database
owner that's not superuser.
present since 8.0 was never fully meaningful, since two recovery targets
cannot be specified. Refactor recovery target type to make this change
and associated code easier to understand. No change in function.
Bug report arising from internal support question.
field into WAL record and reset it from there, rather than using
FrozenTransactionId which can lead to some corner case bugs.
Problem report and suggested route to a fix from Heikki, details by me.
to transformAggregateCall, instead of abusing fields in Aggref to carry them
temporarily. No change in functionality but hopefully the code is a bit
clearer now. Per gripe from Gokulakannan Somasundaram.
too, instead of duplicating the functionality (badly).
I renamed xml_init to pg_xml_init, because the former seemed just a bit too
generic to be safe as a global symbol. I considered likewise renaming
xml_ereport to pg_xml_ereport, but felt that the reference to ereport probably
made it sufficiently PG-centric already.
This operates in the same way as other CREATE OR REPLACE commands, ie,
it replaces everything but the ownership and ACL lists of an existing
entry, and requires the caller to have owner privileges for that entry.
While modifying an existing language has some use in development scenarios,
in typical usage all the "replaced" values come from pg_pltemplate so there
will be no actual change in the language definition. The reason for adding
this is mainly to allow programs to ensure that a language exists without
triggering an error if it already does exist.
This commit just adds and documents the new option. A followon patch
will use it to clean up some unpleasant cases in pg_dump and pg_regress.
Add some checks that seem logically necessary, in particular let's make
real sure that HS slave sessions cannot create temp tables. (If they did
they would think that temp tables belonging to the master's session with
the same BackendId were theirs. We *must* not allow myTempNamespace to
become set in a slave session.)
Change setval() and nextval() so that they are only allowed on temp sequences
in a read-only transaction. This seems consistent with what we allow for
table modifications in read-only transactions. Since an HS slave can't have a
temp sequence, this also provides a nicer cure for the setval PANIC reported
by Erik Rijkers.
Make the error messages more uniform, and have them mention the specific
command being complained of. This seems worth the trifling amount of extra
code, since people are likely to see such messages a lot more than before.
enabled. Bypassing the kernel cache is counter-productive in that case,
because the archiver/walsender process will read from the WAL file
soon after it's written, and if it's not cached the read will cause
a physical read, eating I/O bandwidth available on the WAL drive.
Also, walreceiver process does unaligned writes, so disable O_DIRECT
in walreceiver process for that reason too.
In addition, add support for a "payload" string to be passed along with
each notify event.
This implementation should be significantly more efficient than the old one,
and is also more compatible with Hot Standby usage. There is not yet any
facility for HS slaves to receive notifications generated on the master,
although such a thing is possible in future.
Joachim Wieland, reviewed by Jeff Davis; also hacked on by me.
and use this in pq_getbyte_if_available.
It's only a limited implementation which swithes the whole emulation layer
no non-blocking mode, but that's enough as long as non-blocking is only
used during a short period of time, and only one socket is accessed during
this time.
all the data and using posix_fadvise to nudge the OS into flushing it
earlier. This also hopefully makes CREATE DATABASE avoid spamming the
cache.
Tests show a big speedup on Linux at least on some filesystems.
Idea and patch from Andres Freund.
The purpose of this change is to eliminate the need for every caller
of SearchSysCache, SearchSysCacheCopy, SearchSysCacheExists,
GetSysCacheOid, and SearchSysCacheList to know the maximum number
of allowable keys for a syscache entry (currently 4). This will
make it far easier to increase the maximum number of keys in a
future release should we choose to do so, and it makes the code
shorter, too.
Design and review by Tom Lane.
defined. Its reference to CurrentMemoryContext causes link failures on some
platforms, evidently because the inline function gets compiled despite lack of
use. Per buildfarm member warthog.
