Previously, ALTER SYSTEM failed if the target GUC wasn't present in
the session's GUC hashtable. That is a reasonable behavior for core
(single-part) GUC names, and for custom GUCs for which we have loaded
an extension that's reserved the prefix. But it's unnecessarily
restrictive otherwise, and it also causes inconsistent behavior:
you can "ALTER SYSTEM SET foo.bar" only if you did "SET foo.bar"
earlier in the session. That's fairly silly.
Hence, refactor things so that we can execute ALTER SYSTEM even
if the variable doesn't have a GUC hashtable entry, as long as the
name meets the custom-variable naming requirements and does not
have a reserved prefix. (It's safe to do this even if the
variable belongs to an extension we currently don't have loaded.
A bad value will at worst cause a WARNING when the extension
does get loaded.)
Also, adjust GRANT ON PARAMETER to have the same opinions about
whether to allow an unrecognized GUC name, and to throw the
same errors if not (it previously used a one-size-fits-all
message for several distinguishable conditions). By default,
only a superuser will be allowed to do ALTER SYSTEM SET on an
unrecognized name, but it's possible to GRANT the ability to
do it.
Patch by me, pursuant to a documentation complaint from
Gavin Panella. Arguably this is a bug fix, but given the
lack of other complaints I'll refrain from back-patching.
Discussion: https://postgr.es/m/2617358.1697501956@sss.pgh.pa.us
Discussion: https://postgr.es/m/169746329791.169914.16613647309012285391@wrigleys.postgresql.org
This is a consequence of 4817da51f6 that has bumped up
max_worker_processes, where now the last worker started by the test
would be able to start by itself a parallel worker because there are
more slots available. This did not show up before as the number of
bgworkers reached exactly 8, as known as the previous limit, at the end
of the test.
Per report from buildfarm member crake, reproducible with
debug_parallel_query = regress in the same fashion as fd4d93d269.
mamba has detected a failure in the last test that should start a
bgworker while bypassing the role login check. The buildfarm did not
provide any information about its failure in the logs, but I suspect
that this is caused by an exhaustion of the max_worker_processes slots
set at 8 by default.
In "normal" test runs, the number of bgworkers running at this stage of
the test is already 7, so, if one of them spawns for example a parallel
worker all the slots would be taken, preventing the last worker of the
test to start.
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/ZSyebsiub88pyJJO@paquier.xyz
This adds a new option called BGWORKER_BYPASS_ROLELOGINCHECK to the
flags available to BackgroundWorkerInitializeConnection() and
BackgroundWorkerInitializeConnectionByOid().
This gives the possibility to bgworkers to bypass the role login check,
making possible the use of a role that has no login rights while not
being a superuser. PostgresInit() gains a new flag called
INIT_PG_OVERRIDE_ROLE_LOGIN, taking advantage of the refactoring done in
4800a5dfb4.
Regression tests are added to worker_spi to check the behavior of this
new option with bgworkers.
Author: Bertrand Drouvot
Reviewed-by: Nathan Bossart, Michael Paquier, Bharath Rupireddy
Discussion: https://postgr.es/m/bcc36259-7850-4882-97ef-d6b905d2fc51@gmail.com
worker_spi_launch() may report that a worker stopped when it fails to
connect on a database that does not allow connections if the worker
exits before the SQL function checks for the current status of the
worker. The test is switched to use Cluster::psql instead of
safe_psql() so as it does not fail hard when this query errors. While
on it, this removes a query that looks at pg_stat_activity to simplify
the test, as a check on the contents of the server logs achieves the
same when the worker cannot connect to the database without
datallowconn.
Per buildfarm members kestrel, mamba and serinus. Bonus thanks to Tom
Lane for providing the logs of the failure from mamba that the buildfarm
was not able to show up. Note that I have reproduced the failure with a
hardcoded stop point.
Discussion: https://postgr.es/m/3365937.1696801735@sss.pgh.pa.us
A bgworker can spawn parallel workers of its own when executing queries,
and if the worker uses BGWORKER_BYPASS_ALLOWCONN while the database it
is connected to does not allow connections, a parallel worker would fail
to startup. In the case of this module, the step checking for the
presence of the schema to create was spawning a worker, failing the last
test introduced by 991bb0f965.
This issue could be reproduced with debug_parallel_query = 'regress',
for example.
Per buildfarm member crake.
A couple of new options are added to this module to provide more control
on the ways bgworkers are started:
- A new GUC called worker_spi.role to control which role to use by
default when starting a worker.
- worker_spi_launch() gains three arguments: a role OID, a database OID
and flags (currently only BGWORKER_BYPASS_ALLOWCONN). By default, the
role OID and the database OID are InvalidOid, in which case the worker
would use the related GUCs.
Workers loaded by shared_preload_libraries use the default values
provided by the GUCs, with flags at 0. The options are given to the
main bgworker routine through bgw_extra. A test case is tweaked to
start two dynamic workers with databases and roles defined by the caller
of worker_spi_launch().
These additions will have the advantage of expanding the tests for
bgworkers, for at least two cases:
- BGWORKER_BYPASS_ALLOWCONN has no coverage in the core tree.
- A new bgworker flag is under discussion, and this eases the
integration of new tests.
Reviewed-by: Bertrand Drouvot
Discussion: https://postgr.es/m/bcc36259-7850-4882-97ef-d6b905d2fc51@gmail.com
Two custom wait events are added here:
- "TestShmMqBgWorkerStartup", when setting up a set of bgworkers in
wait_for_workers_to_become_ready().
- "TestShmMqMessageQueue", when waiting for a queued message in
test_shm_mq_pipelined().
Author: Masahiro Ikeda
Discussion: https://postgr.es/m/197bce267fa691a0ac62c86c4ab904c4@oss.nttdata.com
This naming is more consistent with all the other user-facing wait event
strings. Other in-core modules will use the same naming convention, so
let's be consistent here as well.
Extracted from a larger patch by the same author.
Author: Masahiro Ikeda
Discussion: https://postgr.es/m/197bce267fa691a0ac62c86c4ab904c4@oss.nttdata.com
OpenSSL in FIPS mode rejects several encrypted private keys used in
the test suites ssl and ssl_passphrase_callback. This is because they
are in a "traditional" OpenSSL format that uses MD5 for key
generation. The fix is to convert them to the more standard PKCS#8
format that uses SHA1 for key derivation.
This commit contains the converted keys, with the conversion done like
this:
openssl pkcs8 -topk8 -in src/test/modules/ssl_passphrase_callback/server.key -passin pass:FooBaR1 -out src/test/modules/ssl_passphrase_callback/server.key.new -passout pass:FooBaR1
mv src/test/modules/ssl_passphrase_callback/server.key.new src/test/modules/ssl_passphrase_callback/server.key
etc., as well as updated build rules to generate the keys in the new
format if they need to be regenerated.
Reviewed-by: Jacob Champion <jchampion@timescale.com>
Discussion: https://www.postgresql.org/message-id/flat/64de784b-8833-e055-3bd4-7420e6675351%40eisentraut.org
We now create contype='n' pg_constraint rows for not-null constraints.
We propagate these constraints to other tables during operations such as
adding inheritance relationships, creating and attaching partitions and
creating tables LIKE other tables. We also spawn not-null constraints
for inheritance child tables when their parents have primary keys.
These related constraints mostly follow the well-known rules of
conislocal and coninhcount that we have for CHECK constraints, with some
adaptations: for example, as opposed to CHECK constraints, we don't
match not-null ones by name when descending a hierarchy to alter it,
instead matching by column name that they apply to. This means we don't
require the constraint names to be identical across a hierarchy.
For now, we omit them for system catalogs. Maybe this is worth
reconsidering. We don't support NOT VALID nor DEFERRABLE clauses
either; these can be added as separate features later (this patch is
already large and complicated enough.)
psql shows these constraints in \d+.
pg_dump requires some ad-hoc hacks, particularly when dumping a primary
key. We now create one "throwaway" not-null constraint for each column
in the PK together with the CREATE TABLE command, and once the PK is
created, all those throwaway constraints are removed. This avoids
having to check each tuple for nullness when the dump restores the
primary key creation.
pg_upgrading from an older release requires a somewhat brittle procedure
to create a constraint state that matches what would be created if the
database were being created fresh in Postgres 17. I have tested all the
scenarios I could think of, and it works correctly as far as I can tell,
but I could have neglected weird cases.
This patch has been very long in the making. The first patch was
written by Bernd Helmle in 2010 to add a new pg_constraint.contype value
('n'), which I (Álvaro) then hijacked in 2011 and 2012, until that one
was killed by the realization that we ought to use contype='c' instead:
manufactured CHECK constraints. However, later SQL standard
development, as well as nonobvious emergent properties of that design
(mostly, failure to distinguish them from "normal" CHECK constraints as
well as the performance implication of having to test the CHECK
expression) led us to reconsider this choice, so now the current
implementation uses contype='n' again. During Postgres 16 this had
already been introduced by commit e056c557ae, but there were some
problems mainly with the pg_upgrade procedure that couldn't be fixed in
reasonable time, so it was reverted.
In 2016 Vitaly Burovoy also worked on this feature[1] but found no
consensus for his proposed approach, which was claimed to be closer to
the letter of the standard, requiring an additional pg_attribute column
to track the OID of the not-null constraint for that column.
[1] https://postgr.es/m/CAKOSWNkN6HSyatuys8xZxzRCR-KL1OkHS5-b9qd9bf1Rad3PLA@mail.gmail.com
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Author: Bernd Helmle <mailings@oopsware.de>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
This new view, wrapped around a SRF, shows some information known about
wait events, as of:
- Name.
- Type (Activity, I/O, Extension, etc.).
- Description.
All the information retrieved comes from wait_event_names.txt, and the
description is the same as the documentation with filters applied to
remove any XML markups. This view is useful when joined with
pg_stat_activity to get the description of a wait event reported.
Custom wait events for extensions are included in the view.
Original idea by Yves Colin.
Author: Bertrand Drouvot
Reviewed-by: Kyotaro Horiguchi, Masahiro Ikeda, Tom Lane, Michael
Paquier
Discussion: https://postgr.es/m/0e2ae164-dc89-03c3-cf7f-de86378053ac@gmail.com
The OAT hooks are added in ALTER TABLE for the following subcommands:
- { ENABLE | DISABLE | [NO] FORCE } ROW LEVEL SECURITY
- { ENABLE | DISABLE } TRIGGER
- { ENABLE | DISABLE } RULE. Note that there was hook for pg_rewrite,
but not for relation ALTER'ed in pg_class.
Tests are added to test_oat_hook for all the subcommand patterns gaining
hooks here. Based on an ask from Legs Mansion.
Discussion: https://postgr.es/m/tencent_083B3850655AC6EE04FA0A400766D3FE8309@qq.com
Currently, the names of the custom wait event must be registered for
each backend, requiring all these to link to the shared memory area of
an extension, even if these are not loaded with
shared_preload_libraries.
This patch relaxes the constraints related to this infrastructure by
storing the wait events and their names in two dynamic hash tables in
shared memory. This has the advantage to simplify the registration of
custom wait events to a single routine call that returns an event ID
ready for consumption:
uint32 WaitEventExtensionNew(const char *wait_event_name);
The caller of this routine can then cache locally the ID returned, to be
used for pgstat_report_wait_start(), WaitLatch() or a similar routine.
The implementation uses two hash tables: one with a key based on the
event name to avoid duplicates and a second using the event ID as key
for event lookups, like on pg_stat_activity. These tables can hold a
minimum of 16 entries, and a maximum of 128 entries, which should be plenty
enough.
The code changes done in worker_spi show how things are simplified (most
of the code removed in this commit comes from there):
- worker_spi_init() is gone.
- No more shared memory hooks required (size requested and
initialization).
- The custom wait event ID is cached in the process that needs to set
it, with one single call to WaitEventExtensionNew() to retrieve it.
Per suggestion from Andres Freund.
Author: Masahiro Ikeda, with a few tweaks from me.
Discussion: https://postgr.es/m/20230801032349.aaiuvhtrcvvcwzcx@awork3.anarazel.de
Substituting such values in extension scripts facilitated SQL injection
when @extowner@, @extschema@, or @extschema:...@ appeared inside a
quoting construct (dollar quoting, '', or ""). No bundled extension was
vulnerable. Vulnerable uses do appear in a documentation example and in
non-bundled extensions. Hence, the attack prerequisite was an
administrator having installed files of a vulnerable, trusted,
non-bundled extension. Subject to that prerequisite, this enabled an
attacker having database-level CREATE privilege to execute arbitrary
code as the bootstrap superuser. By blocking this attack in the core
server, there's no need to modify individual extensions. Back-patch to
v11 (all supported versions).
Reported by Micah Gate, Valerie Woolard, Tim Carey-Smith, and Christoph
Berg.
Security: CVE-2023-39417
Two backend routines are added to allow extension to allocate and define
custom wait events, all of these being allocated in the type
"Extension":
* WaitEventExtensionNew(), that allocates a wait event ID computed from
a counter in shared memory.
* WaitEventExtensionRegisterName(), to associate a custom string to the
wait event ID allocated.
Note that this includes an example of how to use this new facility in
worker_spi with tests in TAP for various scenarios, and some
documentation about how to use them.
Any code in the tree that currently uses WAIT_EVENT_EXTENSION could
switch to this new facility to define custom wait events. This is left
as work for future patches.
Author: Masahiro Ikeda
Reviewed-by: Andres Freund, Michael Paquier, Tristan Partin, Bharath
Rupireddy
Discussion: https://postgr.es/m/b9f5411acda0cf15c8fbb767702ff43e@oss.nttdata.com
The second portion of the tests had a race condition where it would be
possible for the startup of the dynamic workers to fail, in the event
where the static workers started before them with the library loading in
shared_preload_libraries did not finish to create their respective
schemas. The conflict is caused by the fact that the dynamic and static
workers used the same IDs, overlapping each other, so, for now, switch
the dynamic workers to use different IDs, leading to different schemas
created.
Reported-by: Andres Freund
Discussion: https://postgr.es/m/20230728022332.egqzobhskmlf6ntr@awork3.anarazel.de
This commit moves worker_spi to use TAP tests. sql/worker_spi.sql is
gone, replaced by an equivalent set of queries in a TAP script, without
worker_spi loaded in shared_preload_libraries:
- One query to launch a worker dynamically, relying now on "postgres" as
the default database to connect to.
- Two wait queries with poll_query_until(), one to wait for the worker
schema to be initialized and a second to wait for a tuple processed by
the worker.
- Server reload to accelerate the main loop of the spawned worker.
More coverage is added for workers registered when the library is loaded
with shared_preload_libraries, while on it, checking that these are
connecting to the database set in the GUC worker_spi.database.
A local run of these test is showing that TAP is slightly faster than
the original, while providing more coverage (3.7s vs 4.4s). There was
also some discussions about keeping the SQL tests, but this would
require initializing twice a cluster, increasing the runtime of the
tests up to 5.6s here.
These tests will be expanded more in an upcoming patch aimed at adding
support for custom wait events for the Extension class, still under
discussion, to check the new in-core APIs with and without a library set
in shared_preload_libraries.
Bharath has written the part where shared_preload_libraries is used,
while I have migrated the existing SQL tests to TAP.
Author: Bharath Rupireddy, Michael Paquier
Reviewed-by: Masahiro Ikeda
Discussion: https://postgr.es/m/CALj2ACWR9ncAiDF73unqdJF1dmsA2R0efGXX2624X+YVxcAVWg@mail.gmail.com
This gives a way to make a difference between workers registered when
the library is loaded with shared_preload_libraries and when these are
launched dynamically, in ps output or pg_stat_activity.
Extracted from a larger patch by the same author.
Author: Bharath Rupireddy
Reviewed-by: Masahiro Ikeda
Discussion: https://postgr.es/m/CALj2ACWR9ncAiDF73unqdJF1dmsA2R0efGXX2624X+YVxcAVWg@mail.gmail.com
Currently, the database name to connect is initialized only when the
module is loaded with shared_preload_libraries, causing any call of
worker_spi_launch() to fail if the library is not loaded for a dynamic
bgworker launch. Rather than making the GUC defining the database to
connect to a PGC_POSTMASTER, this commit switches worker_spi.database to
PGC_SIGHUP, loaded even if the module's library is loaded dynamically
for a worker.
We have been discussing about the integration of more advanced tests in
this module, with and without shared_preload_libraries set, so this
eases a bit the work planned in this area.
No backpatch is done as, while this is a bug, it changes the definition
of worker_spi.database.
Author: Masahiro Ikeda
Reviewed-by: Bharath Rupireddy
Discussion: https://postgr.es/m/d30d3ea7d21cb7c9e1e3cc47e301f1b6@oss.nttdata.com
As coded, the code would use as a base comparison the namespace OID from
the first object scanned in pg_depend when switching its namespace
dependency entry to the new one, and use it as a base of comparison for
any follow-up checks. It would also be used as the old namespace OID to
switch *from* for the extension's pg_depend entry. Hence, if the first
object scanned has a namespace different than the one stored in the
extension, we would finish by:
- Not checking that the extension objects map with the extension's
schema.
- Not switching the extension -> namespace dependency entry to the new
namespace provided by the user, making ALTER EXTENSION ineffective.
This issue exists since this command has been introduced in d9572c4 for
relocatable extension, so backpatch all the way down to 11. The test
case has been provided by Heikki, that I have tweaked a bit to show the
effects on pg_depend for the extension.
Reported-by: Heikki Linnakangas
Author: Michael Paquier, Heikki Linnakangas
Discussion: https://postgr.es/m/20eea594-a05b-4c31-491b-007b6fceef28@iki.fi
Backpatch-through: 11
The following routines are added to libpq:
PGresult *PQclosePrepared(PGconn *conn, const char *stmt);
PGresult *PQclosePortal(PGconn *conn, const char *portal);
int PQsendClosePrepared(PGconn *conn, const char *stmt);
int PQsendClosePortal(PGconn *conn, const char *portal);
The "send" routines are non-blocking versions of the two others.
Close messages are part of the protocol but they did not have a libpq
implementation. And, having these routines is for instance useful with
connection poolers as these can detect more easily Close messages
than DEALLOCATE queries.
The implementation takes advantage of what the Describe routines rely on
for portals and statements. Some regression tests are added in
libpq_pipeline, for the four new routines, by closing portals and
statements created already by the tests.
Author: Jelte Fennema
Reviewed-by: Jian He, Michael Paquier
Discussion: https://postgr.es/m/CAGECzQTb4xFAopAVokudB+L62Kt44mNAL4Z9zZ7UTrs1TRFvWA@mail.gmail.com
The following changes are done:
- Addition of WaitEventBufferPin and WaitEventExtension, that hold a
list of wait events related to each category.
- Addition of two functions that encapsulate the list of wait events for
each category.
- Rename BUFFER_PIN to BUFFERPIN (only this wait event class used an
underscore, requiring a specific rule in the automation script).
These changes make a bit easier the automatic generation of all the code
and documentation related to wait events, as all the wait event
categories are now controlled by consistent structures and functions.
Author: Bertrand Drouvot
Discussion: https://postgr.es/m/c6f35117-4b20-4c78-1df5-d3056010dcf5@gmail.com
Discussion: https://postgr.es/m/77a86b3a-c4a8-5f5d-69b9-d70bbf2e9b98@gmail.com
One of the tests for the pipeline mode with portal description expects a
non-NULL PQgetResult, but used an incorrect error message on failure,
telling that PQgetResult being NULL was the expected result.
Author: Jelte Fennema
Discussion: https://postgr.es/m/CAGECzQTkShHecFF+EZrm94Lbsu2ej569T=bz+PjMbw9Aiioxuw@mail.gmail.com
Backpatch-through: 14
Specify --no-locale and --encoding=UTF8 to be consistent with the
Makefile, which specifies NO_LOCALE=1. Fixes test for some locales
when meson is used and ICU is disabled. May have been an oversight in
e6927270cd.
Also switch argument order in unaccent/meson.build to make it
consistent in style.
Discussion: https://postgr.es/m/CABwTF4Wz41pNMJ9q3tpH=6mnvg6aopDU5Lzvers5=6=WJVekww@mail.gmail.com
Author: Gurjeet Singh
Author: Jeff Davis
While executing maintenance operations (ANALYZE, CLUSTER, REFRESH
MATERIALIZED VIEW, REINDEX, or VACUUM), set search_path to
'pg_catalog, pg_temp' to prevent inconsistent behavior.
Functions that are used for functional indexes, in index expressions,
or in materialized views and depend on a different search path must be
declared with CREATE FUNCTION ... SET search_path='...'.
This change addresses a security risk introduced in commit 60684dd834,
where a role with MAINTAIN privileges on a table may be able to
escalate privileges to the table owner. That commit is not yet part of
any release, so no need to backpatch.
Discussion: https://postgr.es/m/e44327179e5c9015c8dda67351c04da552066017.camel%40j-davis.com
Reviewed-by: Greg Stark
Reviewed-by: Nathan Bossart
Run pgindent, pgperltidy, and reformat-dat-files.
This set of diffs is a bit larger than typical. We've updated to
pg_bsd_indent 2.1.2, which properly indents variable declarations that
have multi-line initialization expressions (the continuation lines are
now indented one tab stop). We've also updated to perltidy version
20230309 and changed some of its settings, which reduces its desire to
add whitespace to lines to make assignments etc. line up. Going
forward, that should make for fewer random-seeming changes to existing
code.
Discussion: https://postgr.es/m/20230428092545.qfb3y5wcu4cm75ur@alvherre.pgsql
Commit 3581cbdcd6 added a flag to identify empty BRIN ranges. This adds
the new flag to brin_page_items() output.
This is kept as a separate commit as it should not be backpatched.
Reviewed-by: Justin Pryzby, Matthias van de Meent, Alvaro Herrera
Discussion: https://postgr.es/m/402430e4-7d9d-6cf1-09ef-464d80afff3b@enterprisedb.com
BRIN indexes did not properly distinguish between summaries for empty
(no rows) and all-NULL ranges, treating them as essentially the same
thing. Summaries were initialized with allnulls=true, and opclasses
simply reset allnulls to false when processing the first non-NULL value.
This however produces incorrect results if the range starts with a NULL
value (or a sequence of NULL values), in which case we forget the range
contains NULL values when adding the first non-NULL value.
This happens because the allnulls flag is used for two separate
purposes - to mark empty ranges (not representing any rows yet) and
ranges containing only NULL values.
Opclasses don't know which of these cases it is, and so don't know
whether to set hasnulls=true. Setting the flag in both cases would make
it correct, but it would also make BRIN indexes useless for queries with
IS NULL clauses. All ranges start empty (and thus allnulls=true), so all
ranges would end up with either allnulls=true or hasnulls=true.
The severity of the issue is somewhat reduced by the fact that it only
happens when adding values to an existing summary with allnulls=true.
This can happen e.g. for small tables (because a summary for the first
range exists for all BRIN indexes), or for tables with large fraction of
NULL values in the indexed columns.
Bulk summarization (e.g. during CREATE INDEX or automatic summarization)
that processes all values at once is not affected by this issue. In this
case the flags were updated in a slightly different way, not forgetting
the NULL values.
To identify empty ranges we use a new flag, stored in an unused bit in
the BRIN tuple header so the on-disk format remains the same. A matching
flag is added to BrinMemTuple, into a 3B gap after bt_placeholder.
That means there's no risk of ABI breakage, although we don't actually
pass the BrinMemTuple to any public API.
We could also skip storing index tuples for empty summaries, but then
we'd have to always process such ranges - even if there are no rows in
large parts of the table (e.g. after a bulk DELETE), it would still
require reading the pages etc. So we store them, but ignore them when
building the bitmap.
Backpatch to 11. The issue exists since BRIN indexes were introduced in
9.5, but older releases are already EOL.
Backpatch-through: 11
Reviewed-by: Justin Pryzby, Matthias van de Meent, Alvaro Herrera
Discussion: https://postgr.es/m/402430e4-7d9d-6cf1-09ef-464d80afff3b@enterprisedb.com
Give the new GUC introduced by d4e71df6 a name that is clearly not
intended for mainstream use quite yet.
Future proposals would drop the prefix only after adding infrastructure
to make it efficient. Having the switch in the tree sooner is good
because it might lead to new discoveries about the hazards awaiting us
on a wide range of systems, but that name was too enticing and could
lead to cross-version confusion in future, per complaints from Noah and
Justin.
Suggested-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com> (the idea, not the patch)
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us> (ditto)
Discussion: https://postgr.es/m/20230430041106.GA2268796%40rfd.leadboat.com
This fixes many spelling mistakes in comments, but a few references to
invalid parameter names, function names and option names too in comments
and also some in string constants
Also, fix an #undef that was undefining the incorrect definition
Author: Alexander Lakhin
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/d5f68d19-c0fc-91a9-118d-7c6a5a3f5fad@gmail.com
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in a few places. These
inconsistencies were all introduced relatively recently, after the code
base had parameter name mismatches fixed in bulk (see commits starting
with commits 4274dc22 and 035ce1fe).
pg_bsd_indent still has a couple of similar inconsistencies, which I
(pgeoghegan) have left untouched for now.
Like all earlier commits that cleaned up function parameter names, this
commit was written with help from clang-tidy.
The test previously had a list of OSes that direct I/O was expected to
work on. That worked well enough for the systems in our build farm, but
didn't survive contact with the Debian build bots running on tmpfs via
overlayfs. tmpfs does not support O_DIRECT, but we don't want to
exclude Linux generally.
The new approach is to try to create an empty file with O_DIRECT from
Perl first. If that fails, we'll skip the test and report what the
error was.
Reported-by: Christoph Berg <myon@debian.org>
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://postgr.es/m/ZDYd4A78cT2ULxZZ%40msg.df7cb.de
This reverts commit e056c557ae and minor later fixes thereof.
There's a few problems in this new feature -- most notably regarding
pg_upgrade behavior, but others as well. This new feature is not in any
way critical on its own, so instead of scrambling to fix it we revert it
and try again in early 17 with these issues in mind.
Discussion: https://postgr.es/m/3801207.1681057430@sss.pgh.pa.us
The new direct I/O test deliberately uses a very small shared_buffers to
force some disk transfers without making the data set large and slow,
but ran into a problem with wal_level = minimal: log_newpage_range()
pins many buffers, leading to a few intermittent "no unpinned buffers
available" errors.
We could presumably fix that by adjusting shared_buffers, but crake
seems to be trying to tell us something interesting with these settings,
so let's just avoid wal_level = minimal in this test for now.
Reported-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20230408060408.n7xdwk3mxj5oykt6%40awork3.anarazel.de
Previously, a PostgreSQL-specific callback checked by the regex engine
had a way to trigger a special error code REG_CANCEL if it detected that
the next call to CHECK_FOR_INTERRUPTS() would certainly throw via
ereport().
A later proposed bugfix aims to move some complex logic out of signal
handlers, so that it won't run until the next CHECK_FOR_INTERRUPTS(),
which makes the above design impossible unless we split
CHECK_FOR_INTERRUPTS() into two phases, one to run logic and another to
ereport(). We may develop such a system in the future, but for the
regex code it is no longer necessary.
An earlier commit moved regex memory management over to our
MemoryContext system. Given that the purpose of the two-phase interrupt
checking was to free memory before throwing, something we don't need to
worry about anymore, it seems simpler to inject CHECK_FOR_INTERRUPTS()
directly into cancelation points, and just let it throw.
Since the plan is to keep PostgreSQL-specific concerns separate from the
main regex engine code (with a view to bein able to stay in sync with
other projects), do this with a new macro INTERRUPT(), customizable in
regcustom.h and defaulting to nothing.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CA%2BhUKGK3PGKwcKqzoosamn36YW-fsuTdOPPF1i_rtEO%3DnEYKSg%40mail.gmail.com
Provide a way to ask the kernel to use O_DIRECT (or local equivalent)
where available for data and WAL files, to avoid or minimize kernel
caching. This hurts performance currently and is not intended for end
users yet. Later proposed work would introduce our own I/O clustering,
read-ahead, etc to replace the facilities the kernel disables with this
option.
The only user-visible change, if the developer-only GUC is not used, is
that this commit also removes the obscure logic that would activate
O_DIRECT for the WAL when wal_sync_method=open_[data]sync and
wal_level=minimal (which also requires max_wal_senders=0). Those are
non-default and unlikely settings, and this behavior wasn't (correctly)
documented. The same effect can be achieved with io_direct=wal.
Author: Thomas Munro <thomas.munro@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKGK1X532hYqJ_MzFWt0n1zt8trz980D79WbjwnT-yYLZpg%40mail.gmail.com
We now create pg_constaint rows for NOT NULL constraints with
contype='n'.
We propagate these constraints during operations such as adding
inheritance relationships, creating and attaching partitions, creating
tables LIKE other tables. We mostly follow the well-known rules of
conislocal and coninhcount that we have for CHECK constraints, with some
adaptations; for example, as opposed to CHECK constraints, we don't
match NOT NULL ones by name when descending a hierarchy to alter it;
instead we match by column number. This means we don't require the
constraint names to be identical across a hierarchy.
For now, we omit them from system catalogs. Maybe this is worth
reconsidering. We don't support NOT VALID nor DEFERRABLE clauses
either; these can be added as separate features later (this patch is
already large and complicated enough.)
This has been very long in the making. The first patch was written by
Bernd Helmle in 2010 to add a new pg_constraint.contype value ('n'),
which I (Álvaro) then hijacked in 2011 and 2012, until that one was
killed by the realization that we ought to use contype='c' instead:
manufactured CHECK constraints. However, later SQL standard
development, as well as nonobvious emergent properties of that design
(mostly, failure to distinguish them from "normal" CHECK constraints as
well as the performance implication of having to test the CHECK
expression) led us to reconsider this choice, so now the current
implementation uses contype='n' again.
In 2016 Vitaly Burovoy also worked on this feature[1] but found no
consensus for his proposed approach, which was claimed to be closer to
the letter of the standard, requiring additional pg_attribute columns to
track the OID of the NOT NULL constraint for that column.
[1] https://postgr.es/m/CAKOSWNkN6HSyatuys8xZxzRCR-KL1OkHS5-b9qd9bf1Rad3PLA@mail.gmail.com
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Author: Bernd Helmle <mailings@oopsware.de>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/CACA0E642A0267EDA387AF2B%40%5B172.26.14.62%5D
Discussion: https://postgr.es/m/AANLkTinLXMOEMz+0J29tf1POokKi4XDkWJ6-DDR9BKgU@mail.gmail.com
Discussion: https://postgr.es/m/20110707213401.GA27098@alvh.no-ip.org
Discussion: https://postgr.es/m/1343682669-sup-2532@alvh.no-ip.org
Discussion: https://postgr.es/m/CAKOSWNkN6HSyatuys8xZxzRCR-KL1OkHS5-b9qd9bf1Rad3PLA@mail.gmail.com
Discussion: https://postgr.es/m/20220817181249.q7qvj3okywctra3c@alvherre.pgsql
@extschema:name@ extends the existing @extschema@ feature so that
we can also insert the schema name of some required extension,
thus making cross-extension references robust even if they are in
different schemas.
However, this has the same hazard as @extschema@: if the schema
name is embedded literally in an installed object, rather than being
looked up once during extension script execution, then it's no longer
safe to relocate the other extension to another schema. To deal with
that without restricting things unnecessarily, add a "no_relocate"
option to extension control files. This allows an extension to
specify that it cannot handle relocation of some of its required
extensions, even if in themselves those extensions are relocatable.
We detect "no_relocate" requests of dependent extensions during
ALTER EXTENSION SET SCHEMA.
Regina Obe, reviewed by Sandro Santilli and myself
Discussion: https://postgr.es/m/003001d8f4ae$402282c0$c0678840$@pcorp.us
When determining whether an index update may be skipped by using HOT, we
can ignore attributes indexed by block summarizing indexes without
references to individual tuples that need to be cleaned up.
A new type TU_UpdateIndexes provides a signal to the executor to
determine which indexes to update - no indexes, all indexes, or only the
summarizing indexes.
This also removes rd_indexattr list, and replaces it with rd_attrsvalid
flag. The list was not used anywhere, and a simple flag is sufficient.
This was originally committed as 5753d4ee32, but then got reverted by
e3fcca0d0d because of correctness issues.
Original patch by Josef Simanek, various fixes and improvements by Tomas
Vondra and me.
Authors: Matthias van de Meent, Josef Simanek, Tomas Vondra
Reviewed-by: Tomas Vondra, Alvaro Herrera
Discussion: https://postgr.es/m/05ebcb44-f383-86e3-4f31-0a97a55634cf@enterprisedb.com
Discussion: https://postgr.es/m/CAFp7QwpMRGcDAQumN7onN9HjrJ3u4X3ZRXdGFT0K5G2JWvnbWg%40mail.gmail.com
