Starting on 2023-08-03, this intermittently terminated a "pgbench -C"
test in CI. It could affect a high-client-count "pgbench" without "-C".
While parallel reindexdb and vacuumdb reach the same problematic check,
sufficient client count and/or connection turnover is less plausible for
them. Given the lack of examples from the buildfarm or from manual
builds, reproducing this must entail rare operating system
configurations. Also correct the associated error message, which was
wrong for non-Windows. Back-patch to v12, where the pgbench check first
appeared. While v11 vacuumdb has the problematic check, reaching it
with typical vacuumdb usage is implausible.
Reviewed by Thomas Munro.
Discussion: https://postgr.es/m/CA+hUKG+JwvTNdcyJTriy9BbtzF1veSRQ=9M_ZKFn9_LqE7Kp7Q@mail.gmail.com
There was a mismatch between the const qualifiers for
excludeDirContents in src/backend/backup/basebackup.c and
src/bin/pg_rewind/filemap.c, which led to a quick search for similar
cases. We should make excludeDirContents match, but the rest of the
changes seem like a good idea as well.
Author: David Steele <david@pgmasters.net>
Discussion: https://www.postgresql.org/message-id/flat/669a035c-d23d-2f38-7ff0-0cb93e01d610@pgmasters.net
Previously when client was aborted due to some error during
benchmarking, other clients continued their run until certain number
of transactions specified -t was reached or the time specified by -T
was expired. At the end, the results are printed with caution: "Run
was aborted; the above results are incomplete" shows.
New option "--exit-on-abort" allows pgbench to exit immediately in
this case so that users could quickly fix the cause of the failure and
try again another round of benchmarking.
Author: Yugo Nagata
Reviewed-by: Fabien COELHO, Tatsuo Ishii
Discussion: https://postgr.es/m/flat/20230804130325.df32e60879c38c92bca64207%40sraoss.co.jp
This commit switches the client-side data generation from INSERT queries
to COPY for the two tables pgbench_branches and pgbench_tellers.
pgbench_accounts was already using COPY.
COPY is a better interface for bulk loading or high latency connections
(this point can be countered with the option for server-side data
generation, still client-side is the default), and measurements have
proved that using it for these two other tables can lead to improvements
during initialization. I did not notice slowdowns at large scale
numbers on a local setup, either, most of the work happening for the
accounts table.
Previously COPY was only used for the pgbench_accounts table because the
amount of data was much larger than the two other tables. The code is
refactored so as all three tables use the same code path to execute the
COPY queries, with a callback to build data rows.
Author: Tristan Partin
Discussion: https://postgr.es/m/CSTU5P82ONZ1.19XFUGHMXHBRY@c3po
The tables created by pgbench rely on a few assumptions for TPC-B, where
the "filler" attribute is used to comply with this benchmark's rules as
well as pgbencn historical behavior. The data generated for each table
uses this filler in a different way:
- pgbench_accounts uses it as a blank-padded empty string.
- pgbench_tellers and pgbench_branches use it as a NULL value.
There were no checks done about the consistency of the data initialized,
and this has showed up while discussing a patch that changes the logic
in charge of the client-side data generation (pgbench documents all that
already in its comments). This commit adds some checks on the data
generated for both the server-side and client-side logic.
Reviewed-by: Tristan Partin
Discussion: https://postgr.es/m/ZLik4oKnqRmVCM3t@paquier.xyz
All supported computers have either POSIX or Windows threads, and we no
longer have any automated testing of --disable-thread-safety. We define
a vestigial ENABLE_THREAD_SAFETY macro to 1 in ecpg_config.h in case it
is useful, but we no longer test it anywhere in PostgreSQL code, and
associated dead code paths are removed.
The Meson and perl-based Windows build scripts never had an equivalent
build option.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/CA%2BhUKGLtmexrpMtxBRLCVePqV_dtWG-ZsEbyPrYc%2BNBB2TkNsw%40mail.gmail.com
As coded, the row data strings generated for pgbench_accounts' COPY in
the client-side data generation were always assigning 0 for one of its
attributes. This simplifies a bit an upcoming patch to switch
client-side data generation of pgbench to use COPY for the teller and
branch tables, rather than individual INSERTs.
Author: Tristan Partin
Discussion: https://postgr.es/m/CSTU5P82ONZ1.19XFUGHMXHBRY@c3po
Run pgindent, pgperltidy, and reformat-dat-files.
This set of diffs is a bit larger than typical. We've updated to
pg_bsd_indent 2.1.2, which properly indents variable declarations that
have multi-line initialization expressions (the continuation lines are
now indented one tab stop). We've also updated to perltidy version
20230309 and changed some of its settings, which reduces its desire to
add whitespace to lines to make assignments etc. line up. Going
forward, that should make for fewer random-seeming changes to existing
code.
Discussion: https://postgr.es/m/20230428092545.qfb3y5wcu4cm75ur@alvherre.pgsql
Failing to do so results in an error when a pgbench script tries to
start a serializable transaction inside a pipeline, because by the time
BEGIN ISOLATION LEVEL SERIALIZABLE is executed, we're already in a
transaction that has acquired a snapshot, so the server rightfully
complains.
We can work around that by preparing all commands in the pipeline before
actually starting the pipeline. This changes the existing code in two
aspects: first, we now prepare each command individually at the point
where that command is about to be executed; previously, we would prepare
all commands in a script as soon as the first command of that script
would be executed. It's hard to see that this would make much of a
difference (particularly since it only affects the first time to execute
each script in a client), but I didn't actually try to measure it.
Secondly, we no longer use PQsendPrepare() in pipeline mode, but only
PQprepare. There's no specific reason for this change other than no
longer needing to do differently in pipeline mode. (Previously we had
no choice, because in pipeline mode PQprepare could not be used.)
Backpatch to 14, where pgbench got support for pipeline mode.
Reported-by: Yugo NAGATA <nagata@sraoss.co.jp>
Discussion: https://postgr.es/m/20210716153013.fc53b1c780b06fccc07a7f0d@sraoss.co.jp
Two booleans used for timeout tracking were used within some SIGALRM
signal handlers, but they were not declared as sig_atomic_t, so mark
them as such. This has no consequence on WIN32 for both tools.
Author: Ranier Vilela
Reviewed-by: Michael Paquier, Masahiko Sawada
Discussion: https://postgr.es/m/CAEudQArCDQQiPiFR16=yu9k5s2tp4tgEe1U1ZbkW4ofx81AWWQ@mail.gmail.com
Some callers didn't check the return value of pclose() or
ClosePipeStream() correctly. Either they didn't check it at all or
they treated it like the return of fclose().
The correct way is to first check whether the return value is -1, and
then report errno, and then check the return value like a result from
system(), for which we already have wait_result_to_str() to make it
simpler. To make this more compact, expand wait_result_to_str() to
also handle -1 explicitly.
Reviewed-by: Ankit Kumar Pandey <itsankitkp@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/8cd9fb02-bc26-65f1-a809-b1cb360eef73@enterprisedb.com
This substantially speeds up building for windows, due to the vast amount of
headers included via windows.h. A cross build from linux targetting mingw goes
from
994.11user 136.43system 0:31.58elapsed 3579%CPU
to
422.41user 89.05system 0:14.35elapsed 3562%CPU
The wins on windows are similar-ish (but I don't have a system at hand just
now for actual numbers). Targetting other operating systems the wins are far
smaller (tested linux, macOS, FreeBSD).
For now precompiled headers are disabled by default, it's not clear how well
they work on all platforms. E.g. on FreeBSD gcc doesn't seem to have working
support, but clang does.
When doing a full build precompiled headers are only beneficial for targets
with multiple .c files, as meson builds a separate precompiled header for each
target (so that different compilation options take effect). This commit
therefore only changes target with at least two .c files to use precompiled
headers.
Because this commit adds b_pch=false to the default_options new build
directories will have precompiled headers disabled by default, however
existing build directories will continue use the default value of b_pch, which
is true.
Note that using precompiled headers with ccache requires setting
CCACHE_SLOPPINESS=pch_defines,time_macros to get hits.
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/CA+hUKG+50eOUbN++ocDc0Qnp9Pvmou23DSXu=ZA6fepOcftKqA@mail.gmail.com
Discussion: https://postgr.es/m/c5736f70-bb6d-8d25-e35c-e3d886e4e905@enterprisedb.com
Discussion: https://postgr.es/m/20190826054000.GE7005%40paquier.xyz
When using precompiled headers, we cannot pre-define macros for the system
headers from within .c files, as headers are already processed before
the #define in the C file is reached. But we can pre-define using
-DFD_SETSIZE, as long as that's also used when building the precompiled header.
A few files #define FD_SETSIZE 1024 on windows, as the default is only 64. I
am hesitant to change FD_SETSIZE globally on windows, due to
src/backend/port/win32/socket.c using it to size on-stack arrays. Instead add
-DFD_SETSIZE=1024 when building the specific targets needing it.
We likely should move away from using select() in those places, but that's a
larger change.
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20221005190829.lda7ttalh4mzrvf4@awork3.anarazel.de
Discussion: https://postgr.es/m/CA+hUKG+50eOUbN++ocDc0Qnp9Pvmou23DSXu=ZA6fepOcftKqA@mail.gmail.com
Discussion: https://postgr.es/m/20190826054000.GE7005%40paquier.xyz
The generated resource files aren't exactly the same ones as the old
buildsystems generate. Previously "InternalName" and "OriginalFileName" were
mostly wrong / not set (despite being required), but that was hard to fix in
at least the make build. Additionally, the meson build falls back to a
"auto-generated" description when not set, and doesn't set it in a few cases -
unlikely that anybody looks at these descriptions in detail.
Author: Andres Freund <andres@anarazel.de>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Autoconf is showing its age, fewer and fewer contributors know how to wrangle
it. Recursive make has a lot of hard to resolve dependency issues and slow
incremental rebuilds. Our home-grown MSVC build system is hard to maintain for
developers not using Windows and runs tests serially. While these and other
issues could individually be addressed with incremental improvements, together
they seem best addressed by moving to a more modern build system.
After evaluating different build system choices, we chose to use meson, to a
good degree based on the adoption by other open source projects.
We decided that it's more realistic to commit a relatively early version of
the new build system and mature it in tree.
This commit adds an initial version of a meson based build system. It supports
building postgres on at least AIX, FreeBSD, Linux, macOS, NetBSD, OpenBSD,
Solaris and Windows (however only gcc is supported on aix, solaris). For
Windows/MSVC postgres can now be built with ninja (faster, particularly for
incremental builds) and msbuild (supporting the visual studio GUI, but
building slower).
Several aspects (e.g. Windows rc file generation, PGXS compatibility, LLVM
bitcode generation, documentation adjustments) are done in subsequent commits
requiring further review. Other aspects (e.g. not installing test-only
extensions) are not yet addressed.
When building on Windows with msbuild, builds are slower when using a visual
studio version older than 2019, because those versions do not support
MultiToolTask, required by meson for intra-target parallelism.
The plan is to remove the MSVC specific build system in src/tools/msvc soon
after reaching feature parity. However, we're not planning to remove the
autoconf/make build system in the near future. Likely we're going to keep at
least the parts required for PGXS to keep working around until all supported
versions build with meson.
Some initial help for postgres developers is at
https://wiki.postgresql.org/wiki/Meson
With contributions from Thomas Munro, John Naylor, Stone Tickle and others.
Author: Andres Freund <andres@anarazel.de>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Author: Peter Eisentraut <peter@eisentraut.org>
Reviewed-By: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/20211012083721.hvixq4pnh2pixr3j@alap3.anarazel.de
Make sure that function declarations use names that exactly match the
corresponding names from function definitions for several "lexer
adjacent" backend functions.
These functions were missed by recent commits because they were obscured
by clang-tidy warnings about functions whose signature is directly under
the control of the lexer (flex seems to always generate function
declarations with unnamed parameters). We probably can't fix most of
the warnings it generates for translation units that get built from .l
and .y files, but we can at least do this much.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in optimizer, parser,
utility, libpq, and "commands" code, as well as in remaining library
code. Do the same for all code related to frontend programs (with the
exception of pg_dump/pg_dumpall related code).
Like other recent commits that cleaned up function parameter names, this
commit was written with help from clang-tidy. Later commits will handle
ecpg and pg_dump/pg_dumpall.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
clang 15+ will issue a set-but-not-used warning when the only
use of a variable is in autoincrements (e.g., "foo++;").
That's perfectly sensible, but it detects a few more cases that
we'd not noticed before. Silence the warnings with our usual
methods, such as PG_USED_FOR_ASSERTS_ONLY, or in one case by
actually removing a useless variable.
One thing that we can't nicely get rid of is that with %pure-parser,
Bison emits "yynerrs" as a local variable that falls foul of this
warning. To silence those, I inserted "(void) yynerrs;" in the
top-level productions of affected grammars.
Per recently-established project policy, this is a candidate
for back-patching into out-of-support branches: it suppresses
annoying compiler warnings but changes no behavior. Hence,
back-patch to 9.5, which is as far as these patches go without
issues. (A preliminary check shows that the prior branches
need some other set-but-not-used cleanups too, so I'll leave
them for another day.)
Discussion: https://postgr.es/m/514615.1663615243@sss.pgh.pa.us
In a similar effort to f736e188c and 110d81728, fixup various usages of
string functions where a more appropriate function is available and more
fit for purpose.
These changes include:
1. Use cstring_to_text_with_len() instead of cstring_to_text() when
working with a StringInfoData and the length can easily be obtained.
2. Use appendStringInfoString() instead of appendStringInfo() when no
formatting is required.
3. Use pstrdup(...) instead of psprintf("%s", ...)
4. Use pstrdup(...) instead of psprintf(...) (with no formatting)
5. Use appendPQExpBufferChar() instead of appendPQExpBufferStr() when the
length of the string being appended is 1.
6. appendStringInfoChar() instead of appendStringInfo() when no formatting
is required and string is 1 char long.
7. Use appendPQExpBufferStr(b, .) instead of appendPQExpBuffer(b, "%s", .)
8. Don't use pstrdup when it's fine to just point to the string constant.
I (David) did find other cases of #8 but opted to use #4 instead as I
wasn't certain enough that applying #8 was ok (e.g in hba.c)
Author: Ranier Vilela, David Rowley
Discussion: https://postgr.es/m/CAApHDvo2j2+RJBGhNtUz6BxabWWh2Jx16wMUMWKUjv70Ver1vg@mail.gmail.com
More than twenty years ago (79fcde48b), we hacked the postmaster
to avoid a core-dump on systems that didn't support fflush(NULL).
We've mostly, though not completely, hewed to that rule ever since.
But such systems are surely gone in the wild, so in the spirit of
cleaning out no-longer-needed portability hacks let's get rid of
multiple per-file fflush() calls in favor of using fflush(NULL).
Also, we were fairly inconsistent about whether to fflush() before
popen() and system() calls. While we've received no bug reports
about that, it seems likely that at least some of these call sites
are at risk of odd behavior, such as error messages appearing in
an unexpected order. Rather than expend a lot of brain cells
figuring out which places are at hazard, let's just establish a
uniform coding rule that we should fflush(NULL) before these calls.
A no-op fflush() is surely of trivial cost compared to launching
a sub-process via a shell; while if it's not a no-op then we likely
need it.
Discussion: https://postgr.es/m/2923412.1661722825@sss.pgh.pa.us
In a similar effort to f01592f91, here we're targetting fixing the
warnings where we've deemed the shadowing variable to serve a close enough
purpose to the shadowed variable just to reuse the shadowed version and
not declare the shadowing variable at all.
By my count, this takes the warning count from 106 down to 71.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20220825020839.GT2342@telsasoft.com
<sys/resource.h> is in SUSv2 and is on all targeted Unix systems. We
have a replacement for getrusage() on Windows, so let's just move its
declarations into src/include/port/win32/sys/resource.h so that we can
use a standard-looking #include. Also remove an obsolete reference to
CLK_TCK. Also rename src/port/getrusage.c to win32getrusage.c,
following the convention for Windows-only fallback code.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CA%2BhUKG%2BL_3brvh%3D8e0BW_VfX9h7MtwgN%3DnFHP5o7X2oZucY9dg%40mail.gmail.com
getrlimit() is in SUSv2 and all targeted systems have it.
Windows doesn't have it. We could just use #ifndef WIN32, but for a
little more explanation about why we're making things conditional, let's
retain the HAVE_GETRLIMIT macro. It's defined in port.h for Unix systems.
On systems that have it, it's not necessary to test for RLIMIT_CORE,
RLIMIT_STACK or RLIMIT_NOFILE macros, since SUSv2 requires those and all
targeted systems have them. Also remove references to a pre-historic
alternative spelling of RLIMIT_NOFILE, and coding that seemed to believe
that Cygwin didn't have it.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGJ3LHeP9w5Fgzdr4G8AnEtJ=z=p6hGDEm4qYGEUX5B6fQ@mail.gmail.com
Remove meaningless "failures" column from the aggregate logging. It
was just a sum of "serialization failures" and "deadlock failures".
Pointed out by Tom Lane. Patch reviewed by Fabien COELHO.
Discussion: https://postgr.es/m/4183048.1649536705%40sss.pgh.pa.us
