We already skip rewriting the table in these cases, but we still force a
whole table scan to validate the data. This can be skipped, and thus
we can make the whole ALTER TABLE operation just do some catalog touches
instead of scanning the table, when these two conditions hold:
(a) Old and new pg_constraint.conpfeqop match exactly. This is actually
stronger than needed; we could loosen things by way of operator
families, but it'd require a lot more effort.
(b) The functions, if any, implementing a cast from the foreign type to
the primary opcintype are the same. For this purpose, we can consider a
binary coercion equivalent to an exact type match. When the opcintype
is polymorphic, require that the old and new foreign types match
exactly. (Since ri_triggers.c does use the executor, the stronger check
for polymorphic types is no mere future-proofing. However, no core type
exercises its necessity.)
Author: Noah Misch
Committer's note: catalog version bumped due to change of the Constraint
node. I can't actually find any way to have such a node in a stored
rule, but given that we have "out" support for them, better be safe.
Claiming that the typevar argument to DefineCompositeType() is const
was a plain lie. A similar case in DefineVirtualRelation() was
already changed in passing in commit 1575fbcb. Also clean up the now
unnecessary casts that used to cast away the const.
In nested sub-regex trees, lower-level nodes created DFAs and then
destroyed them again before exiting, which is a bit dumb considering that
the recursive search is likely to call those nodes again later. Instead
cache each created DFA until the end of pg_regexec(). This is basically a
space for time tradeoff, in that it might increase the maximum memory
usage. However, in most regex patterns there are not all that many subre
nodes, so not that many DFAs --- and in any case, the peak usage occurs
when reaching the bottom recursion level, and except for alternation cases
that's going to be the same anyway.
Apparently some primordial version of Spencer's engine needed cdissect()
and child functions to be able to continue matching from a previous
position when re-called. That is dead code, though, since trivial
inspection shows that cdissect can never be entered without having
previously done zapmem which resets the relevant retry counter. I have
also verified experimentally that no case in the Tcl regression tests
reaches cdissect with a nonzero retry value. Accordingly, remove that
logic. This doesn't really save any noticeable number of cycles in itself,
but it is one step towards making dissect() and cdissect() equivalent,
which will allow removing hundreds of lines of near-duplicated code.
Since struct subre's "retry" field is no longer particularly related to
any kind of retry, rename it to "id". As of this commit it's only used
for identifying a subre node in debug printouts, so you might think we
should get rid of the field entirely; but I have a plan for another use.
Cases where a back-reference is part of a larger subexpression that
is quantified have never worked in Spencer's regex engine, because
he used a compile-time transformation that neglected the need to
check the back-reference match in iterations before the last one.
(That was okay for capturing parens, and we still do it if the
regex has *only* capturing parens ... but it's not okay for backrefs.)
To make this work properly, we have to add an "iteration" node type
to the regex engine's vocabulary of sub-regex nodes. Since this is a
moderately large change with a fair risk of introducing new bugs of its
own, apply to HEAD only, even though it's a fix for a longstanding bug.
Both libpq and the backend would truncate a common name extracted from a
certificate at 32 bytes. Replace that fixed-size buffer with dynamically
allocated string so that there is no hard limit. While at it, remove the
code for extracting peer_dn, which we weren't using for anything; and
don't bother to store peer_cn longer than we need it in libpq.
This limit was not so terribly unreasonable when the code was written,
because we weren't using the result for anything critical, just logging it.
But now that there are options for checking the common name against the
server host name (in libpq) or using it as the user's name (in the server),
this could result in undesirable failures. In the worst case it even seems
possible to spoof a server name or user name, if the correct name is
exactly 32 bytes and the attacker can persuade a trusted CA to issue a
certificate in which that string is a prefix of the certificate's common
name. (To exploit this for a server name, he'd also have to send the
connection astray via phony DNS data or some such.) The case that this is
a realistic security threat is a bit thin, but nonetheless we'll treat it
as one.
Back-patch to 8.4. Older releases contain the faulty code, but it's not
a security problem because the common name wasn't used for anything
interesting.
Reported and patched by Heikki Linnakangas
Security: CVE-2012-0867
In the Fedora variant of MinGW, the openssl libraries have their normal
names, not libeay32 and libssleay32. Adjust configure probes to allow
that, per bug #6486.
Tomasz Ostrowski
This allows changing the location of the files that were previously
hard-coded to server.crt, server.key, root.crt, root.crl.
server.crt and server.key continue to be the default settings and are
thus required to be present by default if SSL is enabled. But the
settings for the server-side CA and CRL are now empty by default, and
if they are set, the files are required to be present. This replaces
the previous behavior of ignoring the functionality if the files were
not found.
Create src/backend/regex/README to hold an implementation overview of
the regex package, and fill it in with some preliminary notes about
the code's DFA/NFA processing and colormap management. Much more to
do there of course.
Also, improve some code comments around the colormap and cvec code.
No functional changes except to add one missing assert.
Some line feeds are added to target lists and from lists to make
them more readable. By default they wrap at 80 columns if possible,
but the wrap column is also selectable - if 0 it wraps after every
item.
Andrew Dunstan, reviewed by Hitoshi Harada.
Formerly, we just punted when trying to estimate stats for variables coming
out of sub-queries using DISTINCT, on the grounds that whatever stats we
might have for underlying table columns would be inapplicable. But if the
sub-query has only one DISTINCT column, we can consider its output variable
as being unique, which is useful information all by itself. The scope of
this improvement is pretty narrow, but it costs nearly nothing, so we might
as well do it. Per discussion with Andres Freund.
This patch differs from the draft I submitted yesterday in updating various
comments about vardata.isunique (to reflect its extended meaning) and in
tweaking the interaction with security_barrier views. There does not seem
to be a reason why we can't use this sort of knowledge even when the
sub-query is such a view.
This extends the changes of commit 6252c4f9e2
so that we run the cleanup hook earlier for failure cases as well as
success cases. As before, the point is to avoid an assertion failure from
an Assert I added in commit a874fe7b4c, which
was meant to check that no user-written code can be called during portal
cleanup. This fixes a case reported by Pavan Deolasee in which the Assert
could be triggered during backend exit (see the new regression test case),
and also prevents the possibility that the cleanup hook is run after
portions of the portal's state have already been recycled. That doesn't
really matter in current usage, but it foreseeably could matter in the
future.
Back-patch to 9.1 where the Assert in question was added.
The hstore and json datatypes both have record-conversion functions that
pay attention to column names in the composite values they're handed.
We used to not worry about inserting correct field names into tuple
descriptors generated at runtime, but given these examples it seems
useful to do so. Observe the nicer-looking results in the regression
tests whose results changed.
catversion bump because there is a subtle change in requirements for stored
rule parsetrees: RowExprs from ROW() constructs now have to include field
names.
Andrew Dunstan and Tom Lane
We don't normally allow quals to be pushed down into a view created
with the security_barrier option, but functions without side effects
are an exception: they're OK. This allows much better performance in
common cases, such as when using an equality operator (that might
even be indexable).
There is an outstanding issue here with the CREATE FUNCTION / ALTER
FUNCTION syntax: there's no way to use ALTER FUNCTION to unset the
leakproof flag. But I'm committing this as-is so that it doesn't
have to be rebased again; we can fix up the grammar in a future
commit.
KaiGai Kohei, with some wordsmithing by me.
Since bool_and() is equivalent to min(), and bool_or() to max(), we might
as well let them be index-optimized in the same way. The practical value
of this is debatable at best, but it seems nearly cost-free to enable it.
Code-wise, we need only adjust the entries in pg_aggregate. There is a
measurable planning speed penalty for a query involving one of these
aggregates, but it is only a few percent in simple cases, so that seems
acceptable.
Marti Raudsepp, reviewed by Abhijit Menon-Sen
When written, textanycat, anytextcat, quote_literal, and quote_nullable
were marked volatile, because they could invoke arbitrary type-specific
output functions as part of casting their anyelement arguments to text.
Since then, we have defined a project policy that I/O functions must not
be volatile, as per commit aab353a60b.
So these functions can safely be downgraded to stable. Most of the time
this makes no difference since they'll get inlined anyway, but as noted
by Andrew Dunstan, there are cases where the volatile marking prevents
optimizations that the planner does before function inlining. (I think
I might have overlooked these functions in the earlier commit on the
grounds that inlining would make it moot, but not so --- tgl)
This change results in a change in the expected output of the json
regression tests, because the planner can now flatten a sub-select
that it failed to before. The old output is preferable, but getting
that back will require some as-yet-unfinished work on RowExpr handling.
Marti Raudsepp
The immediate impetus for this is that Noah Misch's patch to elide
unnecessary table and index rebuilds when changing typmod for temporal
types uses it; and this is extracted from that patch, with some
further commentary by me. But it seems logically separate from the
remainder of the patch, so I'm committing it separately; this is not
the first time someone has wanted fls() in the backend and probably
won't be the last.
If we end up using this in more performance-critical spots it may be
worthwhile to add some architecture-specific optimizations to our
src/port version of fls() - e.g. any x86 platform can implement this
using the assembly instruction BSRL. But performance won't matter
a bit for assessing typmod changes, so I'm not worried about that
right now.
This enables ALTER TABLE to skip table and index rebuilds when the
new type is unconstraint varbit, or when the allowable number of bits
is not decreasing.
Noah Misch, with review and a fix for an OID collision by me.
This enables ALTER TABLE to skip table and index rebuilds when a column
is changed to an unconstrained numeric, or when the scale is unchanged
and the precision does not decrease.
Noah Misch, with a few stylistic changes and a fix for an OID
collision by me.
Sometimes it may be useful to get actual row counts out of EXPLAIN
(ANALYZE) without paying the cost of timing every node entry/exit.
With this patch, you can say EXPLAIN (ANALYZE, TIMING OFF) to get that.
Tomas Vondra, reviewed by Eric Theise, with minor doc changes by me.
Like the XML data type, we simply store JSON data as text, after checking
that it is valid. More complex operations such as canonicalization and
comparison may come later, but this is enough for not.
There are a few open issues here, such as whether we should attempt to
detect UTF-8 surrogate pairs represented as \uXXXX\uYYYY, but this gets
the basic framework in place.
When a backend needs to flush the WAL, and someone else is already flushing
the WAL, wait until it releases the WALInsertLock and check if we still need
to do the flush or if the other backend already did the work for us, before
acquiring WALInsertLock. This helps group commit, because when the WAL flush
finishes, all the backends that were waiting for it can be woken up in one
go, and the can all concurrently observe that they're done, rather than
waking them up one by one in a cascading fashion.
This is based on a new LWLock function, LWLockWaitUntilFree(), which has
peculiar semantics. If the lock is immediately free, it grabs the lock and
returns true. If it's not free, it waits until it is released, but then
returns false without grabbing the lock. This is used in XLogFlush(), so
that when the lock is acquired, the backend flushes the WAL, but if it's
not, the backend first checks the current flush location before retrying.
Original patch and benchmarking by Peter Geoghegan and Simon Riggs, although
this patch as committed ended up being very different from that.
This patch fixes the planner so that it can generate nestloop-with-
inner-indexscan plans even with one or more levels of joining between
the indexscan and the nestloop join that is supplying the parameter.
The executor was fixed to handle such cases some time ago, but the
planner was not ready. This should improve our plans in many situations
where join ordering restrictions formerly forced complete table scans.
There is probably a fair amount of tuning work yet to be done, because
of various heuristics that have been added to limit the number of
parameterized paths considered. However, we are not going to find out
what needs to be adjusted until the code gets some real-world use, so
it's time to get it in there where it can be tested easily.
Note API change for index AM amcostestimate functions. I'm not aware of
any non-core index AMs, but if there are any, they will need minor
adjustments.
Hitherto, the information schema only showed explicitly granted
privileges that were visible in the *acl catalog columns. If no
privileges had been granted, the implicit privileges were not shown.
To fix that, add an SQL-accessible version of the acldefault()
function, and use that inside the aclexplode() calls to substitute the
catalog-specific default privilege set for null values.
reviewed by Abhijit Menon-Sen
This has been the behavior already in most cases, but through
omission, ALTER DOMAIN / OWNER TO and ALTER DOMAIN / SET SCHEMA would
silently work on non-domain types as well.
Those fields only appear in the structs so that genbki.pl can create
the BKI bootstrap files for the catalogs. But they are not actually
usable from C. So hiding them can prevent coding mistakes, saves
stack space, and can help the compiler.
In certain catalogs, the first variable-length field has been kept
visible after manual inspection. These exceptions are noted in C
comments.
reviewed by Tom Lane
To make it wake up promptly when activity starts again, backends nudge it
by setting a latch in MarkBufferDirty(). The latch is kept set while
bgwriter is active, so there is very little overhead from that when the
system is busy. It is only armed before going into longer sleep.
Peter Geoghegan, with some changes by me.
This doesn't do anything useful just yet, but is intended as supporting
infrastructure for allowing sepgsql to sensibly check DROP permissions.
KaiGai Kohei and Robert Haas
Add counters for number and size of temporary files used
for spill-to-disk queries for each database to the
pg_stat_database view.
Tomas Vondra, review by Magnus Hagander
Base backup follows recommended procedure, plus goes to great
lengths to ensure that partial page writes are avoided.
Jun Ishizuka and Fujii Masao, with minor modifications
This reports the depth level of triggers currently in execution, or zero
if not called from inside a trigger.
No catversion bump in this patch, but you have to initdb if you want
access to the new function.
Author: Kevin Grittner
Replication occurs only to memory on standby, not to disk,
so provides additional performance if user wishes to
reduce durability level slightly. Adds concept of multiple
independent sync rep queues.
Fujii Masao and Simon Riggs
We log AccessExclusiveLocks for replay onto standby nodes,
but because of timing issues on ProcArray it is possible to
log a lock that is still held by a just committed transaction
that is very soon to be removed. To avoid any timing issue we
avoid applying locks made by transactions with InvalidXid.
Simon Riggs, bug report Tom Lane, diagnosis Pavan Deolasee
This separates the state (running/idle/idleintransaction etc) into
it's own field ("state"), and leaves the query field containing just
query text.
The query text will now mean "current query" when a query is running
and "last query" in other states. Accordingly,the field has been
renamed from current_query to query.
Since backwards compatibility was broken anyway to make that, the procpid
field has also been renamed to pid - along with the same field in
pg_stat_replication for consistency.
Scott Mead and Magnus Hagander, review work from Greg Smith
