This adds a key management system that stores (currently) two data
encryption keys of length 128, 192, or 256 bits. The data keys are
AES256 encrypted using a key encryption key, and validated via GCM
cipher mode. A command to obtain the key encryption key must be
specified at initdb time, and will be run at every database server
start. New parameters allow a file descriptor open to the terminal to
be passed. pg_upgrade support has also been added.
Discussion: https://postgr.es/m/CA+fd4k7q5o6Nc_AaX6BcYM9yqTbC6_pnH-6nSD=54Zp6NBQTCQ@mail.gmail.com
Discussion: https://postgr.es/m/20201202213814.GG20285@momjian.us
Author: Masahiko Sawada, me, Stephen Frost
Buildfarm members pogona and petalura have shown a failure when
pg_ctl/t/004_logrotate.pl starts just before local midnight.
The default rotate-at-midnight behavior occurs just before the
Perl script examines current_logfiles, so it figures that the
rotation it's already requested has occurred ... but in reality,
that rotation happens just after it looks, so the expected new
log data goes into a different file than the one it's examining.
In HEAD, src/test/kerberos/t/001_auth.pl has acquired similar code
that evidently has a related failure mode. Besides being quite new,
few buildfarm critters run that test, so it's unsurprising that
we've not yet seen a failure there.
Fix both cases by setting log_rotation_age = 0 so that no time-based
rotation can occur. Also absorb 004_logrotate.pl's decision to
set lc_messages = 'C' into the kerberos test, in hopes that it will
work in non-English prevailing locales.
Report: https://buildfarm.postgresql.org/cgi-bin/show_log.pl?nm=pogona&dt=2020-12-24%2022%3A10%3A04
Report: https://buildfarm.postgresql.org/cgi-bin/show_log.pl?nm=petalura&dt=2020-02-01%2022%3A20%3A04
The parsing of this parameter has been using strtoul(), which is not
portable across platforms. On most Unix platforms, unsigned long has a
size of 64 bits, while on Windows it is 32 bits. It is common in
recovery scenarios to rely on the output of txid_current() or even the
newer pg_current_xact_id() to get a transaction ID for setting up
recovery_target_xid. The value returned by those functions includes the
epoch in the computed result, which would cause strtoul() to fail where
unsigned long has a size of 32 bits once the epoch is incremented.
WAL records and 2PC data include only information about 32-bit XIDs and
it is not possible to have XIDs across more than one epoch, so
discarding the high bits from the transaction ID set has no impact on
recovery. On the contrary, the use of strtoul() prevents a consistent
behavior across platforms depending on the size of unsigned long.
This commit changes the parsing of recovery_target_xid to use
pg_strtouint64() instead, available down to 9.6. There is one TAP test
stressing recovery with recovery_target_xid, where a tweak based on
pg_reset{xlog,wal} is added to bump the XID epoch so as this change gets
tested, as per an idea from Alexander Lakhin.
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/m/16780-107fd0c0385b1035@postgresql.org
Backpatch-through: 9.6
While we do allow SRFs in ORDER BY, scan/join processing should not
consider such cases - such sorts should only happen via final Sort atop
a ProjectSet. So make sure we don't try adding such sorts below Gather
Merge, just like we do for expressions that are volatile and/or not
parallel safe.
Backpatch to PostgreSQL 13, where this code was introduced as part of
the Incremental Sort patch.
Author: James Coleman
Reviewed-by: Tomas Vondra
Backpatch-through: 13
Discussion: https://postgr.es/m/CAAaqYe8cK3g5CfLC4w7bs=hC0mSksZC=H5M8LSchj5e5OxpTAg@mail.gmail.com
Discussion: https://postgr.es/m/295524.1606246314%40sss.pgh.pa.us
The jsonb || jsonb operator arbitrarily rejected certain combinations
of scalar and non-scalar inputs, while being willing to concatenate
other combinations. This was of course quite undocumented. Rather
than trying to document it, let's just remove the restriction,
creating a uniform rule that unless we are handling an object-to-object
concatenation, non-array inputs are converted to one-element arrays,
resulting in an array-to-array concatenation. (This does not change
the behavior for any case that didn't throw an error before.)
Per complaint from Joel Jacobson. Back-patch to all supported branches.
Discussion: https://postgr.es/m/163099.1608312033@sss.pgh.pa.us
Commit ebb7ae839d ensured we ignore pathkeys with volatile expressions
when considering adding a sort below a Gather Merge. Turns out we need
to care about parallel safety of the pathkeys too, otherwise we might
try sorting e.g. on results of a correlated subquery (as demonstrated
by a report from Luis Roberto).
Initial investigation by Tom Lane, patch by James Coleman. Backpatch
to 13, where the code was instroduced (as part of Incremental Sort).
Reported-by: Luis Roberto
Author: James Coleman
Reviewed-by: Tomas Vondra
Backpatch-through: 13
Discussion: https://postgr.es/m/622580997.37108180.1604080457319.JavaMail.zimbra%40siscobra.com.br
Discussion: https://postgr.es/m/CAAaqYe8cK3g5CfLC4w7bs=hC0mSksZC=H5M8LSchj5e5OxpTAg@mail.gmail.com
generate_useful_gather_paths used to skip unsorted paths (without any
pathkeys), but that is unnecessary - the later code actually can handle
such paths just fine by adding a Sort node. This is clearly a thinko,
preventing construction of useful plans.
Backpatch to 13, where Incremental Sort was introduced.
Author: James Coleman
Reviewed-by: Tomas Vondra
Backpatch-through: 13
Discussion: https://postgr.es/m/CAAaqYe8cK3g5CfLC4w7bs=hC0mSksZC=H5M8LSchj5e5OxpTAg@mail.gmail.com
Multiranges are basically sorted arrays of non-overlapping ranges with
set-theoretic operations defined over them.
Since v14, each range type automatically gets a corresponding multirange
datatype. There are both manual and automatic mechanisms for naming multirange
types. Once can specify multirange type name using multirange_type_name
attribute in CREATE TYPE. Otherwise, a multirange type name is generated
automatically. If the range type name contains "range" then we change that to
"multirange". Otherwise, we add "_multirange" to the end.
Implementation of multiranges comes with a space-efficient internal
representation format, which evades extra paddings and duplicated storage of
oids. Altogether this format allows fetching a particular range by its index
in O(n).
Statistic gathering and selectivity estimation are implemented for multiranges.
For this purpose, stored multirange is approximated as union range without gaps.
This field will likely need improvements in the future.
Catversion is bumped.
Discussion: https://postgr.es/m/CALNJ-vSUpQ_Y%3DjXvTxt1VYFztaBSsWVXeF1y6gTYQ4bOiWDLgQ%40mail.gmail.com
Discussion: https://postgr.es/m/a0b8026459d1e6167933be2104a6174e7d40d0ab.camel%40j-davis.com#fe7218c83b08068bfffb0c5293eceda0
Author: Paul Jungwirth, revised by me
Reviewed-by: David Fetter, Corey Huinker, Jeff Davis, Pavel Stehule
Reviewed-by: Alvaro Herrera, Tom Lane, Isaac Morland, David G. Johnston
Reviewed-by: Zhihong Yu, Alexander Korotkov
Commit 257836a75 added the "locale" subdirectory to SUBDIRS,
but neglected to remove it from ALWAYS_SUBDIRS. This oversight
had no functional effect because the filter-out function would
remove it anyway. Still, it's confusing to readers to list a
subdirectory in both places, especially because it makes the
associated comment into a partial lie.
Any subdirectory that's ignoring /output_iso/ should also
ignore /tmp_check_iso/, which could be left behind by a
failed pg_isolation_regress_check run.
I think these have been wrong for awhile, but it doesn't
seem important to fix in back branches.
Many older tests where written in a style like
SELECT '' AS two, i.* FROM INT2_TBL
where the first column indicated the number of expected result rows.
This has gotten increasingly out of date, as the test data fixtures
have expanded, so a lot of these were wrong and misleading. Moreover,
this style isn't really necessary, since the psql output already shows
the number of result rows.
To clean this up, remove all those extra columns.
Discussion: https://www.postgresql.org/message-id/flat/1a25312b-2686-380d-3c67-7a69094a999f%40enterprisedb.com
This is essential if we'd like to allow existing extension data types
to support subscripting in future, since dropping and recreating the
type isn't a practical thing for an extension upgrade script, and
direct manipulation of pg_type isn't a great answer either.
There was some discussion about also allowing alteration of typelem,
but it's less clear whether that's a good idea or not, so for now
I forebore.
Discussion: https://postgr.es/m/3724341.1607551174@sss.pgh.pa.us
Commit c7aba7c14 didn't add this, but after more fooling with the
feature I feel that it'd be useful. To make this possible, refactor
getSubscriptingRoutines() so that the caller is responsible for
throwing any error. (In clauses.c, I just chose to make the
most conservative assumption rather than throwing an error. We don't
expect failures there anyway really, so the code space for an error
message would be a poor investment.)
This patch generalizes the subscripting infrastructure so that any
data type can be subscripted, if it provides a handler function to
define what that means. Traditional variable-length (varlena) arrays
all use array_subscript_handler(), while the existing fixed-length
types that support subscripting use raw_array_subscript_handler().
It's expected that other types that want to use subscripting notation
will define their own handlers. (This patch provides no such new
features, though; it only lays the foundation for them.)
To do this, move the parser's semantic processing of subscripts
(including coercion to whatever data type is required) into a
method callback supplied by the handler. On the execution side,
replace the ExecEvalSubscriptingRef* layer of functions with direct
calls to callback-supplied execution routines. (Thus, essentially
no new run-time overhead should be caused by this patch. Indeed,
there is room to remove some overhead by supplying specialized
execution routines. This patch does a little bit in that line,
but more could be done.)
Additional work is required here and there to remove formerly
hard-wired assumptions about the result type, collation, etc
of a SubscriptingRef expression node; and to remove assumptions
that the subscript values must be integers.
One useful side-effect of this is that we now have a less squishy
mechanism for identifying whether a data type is a "true" array:
instead of wiring in weird rules about typlen, we can look to see
if pg_type.typsubscript == F_ARRAY_SUBSCRIPT_HANDLER. For this
to be bulletproof, we have to forbid user-defined types from using
that handler directly; but there seems no good reason for them to
do so.
This patch also removes assumptions that the number of subscripts
is limited to MAXDIM (6), or indeed has any hard-wired limit.
That limit still applies to types handled by array_subscript_handler
or raw_array_subscript_handler, but to discourage other dependencies
on this constant, I've moved it from c.h to utils/array.h.
Dmitry Dolgov, reviewed at various times by Tom Lane, Arthur Zakirov,
Peter Eisentraut, Pavel Stehule
Discussion: https://postgr.es/m/CA+q6zcVDuGBv=M0FqBYX8DPebS3F_0KQ6OVFobGJPM507_SZ_w@mail.gmail.com
Discussion: https://postgr.es/m/CA+q6zcVovR+XY4mfk-7oNk-rF91gH0PebnNfuUjuuDsyHjOcVA@mail.gmail.com
Formerly, extended statistics only handled clauses that were
RestrictInfos. However, the restrictinfo machinery doesn't create
sub-AND RestrictInfos for AND clauses underneath OR clauses.
Therefore teach extended statistics to handle bare AND clauses,
looking for compatible RestrictInfo clauses underneath them.
Dean Rasheed, reviewed by Tomas Vondra.
Discussion: https://postgr.es/m/CAEZATCW=J65GUFm50RcPv-iASnS2mTXQbr=CfBvWRVhFLJ_fWA@mail.gmail.com
When estimating an OR clause using multiple extended statistics
objects, treat the estimates for each set of clauses for each
statistics object as independent of one another. The overlap estimates
produced for each statistics object do not apply to clauses covered by
other statistics objects.
Dean Rasheed, reviewed by Tomas Vondra.
Discussion: https://postgr.es/m/CAEZATCW=J65GUFm50RcPv-iASnS2mTXQbr=CfBvWRVhFLJ_fWA@mail.gmail.com
Exercise some error cases that were never reached in the existing
regression tests. This is partly for code-coverage reasons, and
partly to memorialize the current behavior in advance of planned
changes for generic subscripting.
Also, I noticed that type_sanity's check to verify that all standard
types have array types was never extended when we added arrays for
all system catalog rowtypes (f7f70d5e2), nor when we added arrays
over domain types (c12d570fa). So do that. Also, since the query's
expected output isn't empty, it seems like a good idea to add an
ORDER BY to make sure the result stays stable.
Commit 4be058fe9 forgot that the append_rel_list would already be
populated at the time we remove useless result RTEs, and it might contain
PlaceHolderVars that need to be adjusted like the ones in the main parse
tree. This could lead to "no relation entry for relid N" failures later
on, when the planner tries to do something with an unadjusted PHV.
Per report from Tom Ellis. Back-patch to v12 where the bug came in.
Discussion: https://postgr.es/m/20201205173056.GF30712@cloudinit-builder
Formerly we only applied extended statistics to an OR clause as part
of the clauselist_selectivity() code path for an OR clause appearing
in an implicitly-ANDed list of clauses. This meant that it could only
use extended statistics if all sub-clauses of the OR clause were
covered by a single extended statistics object.
Instead, teach clause_selectivity() how to apply extended statistics
to an OR clause by handling its ORed list of sub-clauses in a similar
manner to an implicitly-ANDed list of sub-clauses, but with different
combination rules. This allows one or more extended statistics objects
to be used to estimate all or part of the list of sub-clauses. Any
remaining sub-clauses are then treated as if they are independent.
Additionally, to avoid double-application of extended statistics, this
introduces "extended" versions of clause_selectivity() and
clauselist_selectivity(), which include an option to ignore extended
statistics. This replaces the old clauselist_selectivity_simple()
function which failed to completely ignore extended statistics when
called from the extended statistics code.
A known limitation of the current infrastructure is that an AND clause
under an OR clause is not treated as compatible with extended
statistics (because we don't build RestrictInfos for such sub-AND
clauses). Thus, for example, "(a=1 AND b=1) OR (a=2 AND b=2)" will
currently be treated as two independent AND clauses (each of which may
be estimated using extended statistics), but extended statistics will
not currently be used to account for any possible overlap between
those clauses. Improving that is left as a task for the future.
Original patch by Tomas Vondra, with additional improvements by me.
Discussion: https://postgr.es/m/20200113230008.g67iyk4cs3xbnjju@development
This changes CLUSTER and REINDEX so as a parenthesized grammar becomes
possible for options, while unifying the grammar parsing rules for
option lists with the existing ones.
This is a follow-up of the work done in 873ea9e for VACUUM, ANALYZE and
EXPLAIN. This benefits REINDEX for a potential backend-side filtering
for collatable-sensitive indexes and TABLESPACE, while CLUSTER would
benefit from the latter.
Author: Alexey Kondratov, Justin Pryzby
Discussion: https://postgr.es/m/8a8f5f73-00d3-55f8-7583-1375ca8f6a91@postgrespro.ru
GSS information (if used) such as if the connection was authorized using
GSS or if it was encrypted using GSS, and perhaps most importantly, what
the GSS principal used for the authentication was, is extremely useful
but wasn't being included in the connection authorized log message.
Therefore, add to the connection authorized log message that
information, in a similar manner to how we log SSL information when SSL
is used for a connection.
Author: Vignesh C
Reviewed-by: Bharath Rupireddy
Discussion: https://www.postgresql.org/message-id/CALDaNm2N1385_Ltoo%3DS7VGT-ESu_bRQa-sC1wg6ikrM2L2Z49w%40mail.gmail.com
Commit 6b466bf5f2 allowed pg_stat_statements to track the number of
WAL records, full page images and bytes that each statement generated.
Similarly this commit allows us to track the cluster-wide WAL statistics
counters.
New columns wal_records, wal_fpi and wal_bytes are added into the
pg_stat_wal view, and reports the total number of WAL records,
full page images and bytes generated in the , respectively.
Author: Masahiro Ikeda
Reviewed-by: Amit Kapila, Movead Li, Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/35ef960128b90bfae3b3fdf60a3a860f@oss.nttdata.com
As it stood, expandTableLikeClause() re-did the same relation_openrv
call that transformTableLikeClause() had done. However there are
scenarios where this would not find the same table as expected.
We hold lock on the LIKE source table, so it can't be renamed or
dropped, but another table could appear before it in the search path.
This explains the odd behavior reported in bug #16758 when cloning a
table as a temp table of the same name. This case worked as expected
before commit 502898192 introduced the need to open the source table
twice, so we should fix it.
To make really sure we get the same table, let's re-open it by OID not
name. That requires adding an OID field to struct TableLikeClause,
which is a little nervous-making from an ABI standpoint, but as long
as it's at the end I don't think there's any serious risk.
Per bug #16758 from Marc Boeren. Like the previous patch,
back-patch to all supported branches.
Discussion: https://postgr.es/m/16758-840e84a6cfab276d@postgresql.org
If a PlaceHolderVar is to be evaluated at a join relation, but
its value is only needed there and not at higher levels, we neglected
to update the joinrel's direct_lateral_relids to include the PHV's
source rel. This causes problems because join_is_legal() then won't
allow joining the joinrel to the PHV's source rel at all, leading
to "failed to build any N-way joins" planner failures.
Per report from Andreas Seltenreich. Back-patch to 9.5
where the problem originated.
Discussion: https://postgr.es/m/87blfgqa4t.fsf@aurora.ydns.eu
Previously test_shm_mq worker used the stripped-down version of die()
as the SIGTERM signal handler. This commit makes it use die(), instead,
to simplify the code.
In terms of the code, the difference between die() and the stripped-down
version previously used is whether the signal handler directly may call
ProcessInterrupts() or not. But this difference doesn't exist in
a background worker because, in bgworker, DoingCommandRead flag will
never be true and die() will never call ProcessInterrupts() directly.
Therefore test_shm_mq worker can safely use die(), like other bgworker
proceses (e.g., logical replication apply launcher or autoprewarm worker)
currently do.
Thanks to Craig Ringer for the report and investigation of the issue.
Author: Bharath Rupireddy
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/CAGRY4nxsAe_1k_9g5b47orA0S011iBoHsXHFMH7cg7HV0O1bwQ@mail.gmail.com
Previously worker_spi used its custom signal handlers for SIGHUP and
SIGTERM. This commit makes worker_spi use the standard signal handlers,
to simplify the code.
Note that die() is used as the standard SIGTERM signal handler in
worker_spi instead of SignalHandlerForShutdownRequest() or bgworker_die().
Previously the exit handling was only able to exit from within the main loop,
and not from within the backend code it calls. This is why die() needs to
be used here, so worker_spi can respond to SIGTERM signal while it's
executing a query.
Maybe we can say that it's a bug that worker_spi could not respond to
SIGTERM during query execution. But since worker_spi is a just example
of the background worker code, we don't do the back-patch.
Thanks to Craig Ringer for the report and investigation of the issue.
Author: Bharath Rupireddy
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/CALj2ACXDEZhAFOTDcqO9cFSRvrFLyYOnPKrcA1UG4uZn9hUAVg@mail.gmail.com
Discussion: https://postgr.es/m/CAGRY4nxsAe_1k_9g5b47orA0S011iBoHsXHFMH7cg7HV0O1bwQ@mail.gmail.com
currtid() and currtid2() are an undocumented set of functions whose sole
known user is the Postgres ODBC driver, able to retrieve the latest TID
version for a tuple given by the caller of those functions.
As used by Postgres ODBC, currtid() is a shortcut able to retrieve the
last TID loaded into a backend by passing an OID of 0 (magic value)
after a tuple insertion. This is removed in this commit, as it became
obsolete after the driver began using "RETURNING ctid" with inserts, a
clause supported since Postgres 8.2 (using RETURNING is better for
performance anyway as it reduces the number of round-trips to the
backend).
currtid2() is still used by the driver, so this remains around for now.
Note that this function is kept in its original shape for backward
compatibility reasons.
Per discussion with many people, including Andres Freund, Peter
Eisentraut, Álvaro Herrera, Hiroshi Inoue, Tom Lane and myself.
Bump catalog version.
Discussion: https://postgr.es/m/20200603021448.GB89559@paquier.xyz
Historically these were called >^ and <^, but that is inconsistent
with the similar box, polygon, and circle operators, which are named
|>> and <<| respectively. Worse, the >^ and <^ names are used for
*not* strict above/below tests for the box type.
Hence, invent new operators following the more common naming. The
old operators remain available for now, and are still accepted by
the relevant index opclasses too. But there's a deprecation notice,
so maybe we can get rid of them someday.
Emre Hasegeli, reviewed by Pavel Borisov
Discussion: https://postgr.es/m/24348.1587444160@sss.pgh.pa.us
Clarify that you can "insert" into a generated column as long as what
you're inserting is a DEFAULT placeholder.
Also, use ERRCODE_GENERATED_ALWAYS in place of ERRCODE_SYNTAX_ERROR;
there doesn't seem to be any reason to use the less specific errcode.
Discussion: https://postgr.es/m/9q0sgcr416t.fsf@gmx.us
One can say "INSERT INTO tab(generated_col) VALUES (DEFAULT)" and not
draw an error. But the equivalent case for a multi-row VALUES list
always threw an error, even if one properly said DEFAULT in each row.
Fix that. While here, improve the test cases for nearby logic about
OVERRIDING SYSTEM/USER values.
Dean Rasheed
Discussion: https://postgr.es/m/9q0sgcr416t.fsf@gmx.us
Since we're assuming IEEE floats these days, there seems little
reason not to do this. It has the advantage that when the slope is
computed as infinite due to the presence of Inf coordinates, we get
saner behavior than before from line_construct(), and thence also
in some dependent operations such as finding the closest point.
Also fix line_construct() to special-case slope zero. The previous
coding got the right answer in most cases, but it could compute
C as NaN when the point has Inf coordinates.
Discussion: https://postgr.es/m/CAGf+fX70rWFOk5cd00uMfa__0yP+vtQg5ck7c2Onb-Yczp0URA@mail.gmail.com
"FPeq(infinity, infinity)" returned false, on account of getting NaN
when it subtracts the two inputs. Fix that by adding a separate
check for exact equality.
FPle() and FPge() similarly got the wrong answer for two like-signed
infinities. In those cases, we can just rearrange the comparisons
to avoid potentially subtracting infinities.
While the sibling functions FPne() etc accidentally gave the right
answers even with the internal NaN results, it seems best to make
similar adjustments to them to avoid depending on this.
FPeq() has to be converted to an inline function to avoid double
evaluations of its arguments, and I did the same for the others
just for consistency.
In passing, make the handling of NaN cases in line_eq() and
point_eq_point() simpler and easier to reason about, and perhaps
faster.
This results in just one visible regression test change: slope()
now gives DBL_MAX for two inputs of (inf,1e300), which is consistent
with what it does for (1e300,inf), so that seems like a bug fix.
Discussion: https://postgr.es/m/CAGf+fX70rWFOk5cd00uMfa__0yP+vtQg5ck7c2Onb-Yczp0URA@mail.gmail.com
Add another edge-case value to "point_tbl", and add a test for
the line(point, point) function.
Some of the behaviors exposed here are wrong, but the idea of
committing this separately is to memorialize what we were getting,
and to allow easier inspection of the behavior changes caused by
upcoming patches.
Kyotaro Horiguchi (line() test added by me)
Discussion: https://postgr.es/m/CAGf+fX70rWFOk5cd00uMfa__0yP+vtQg5ck7c2Onb-Yczp0URA@mail.gmail.com
As per discussion with Peter Eisentraunt, the SQL standard specifies
that any tuple insertion done as part of CREATE TABLE AS happens without
any extra ACL check, so it makes little sense to keep a check for INSERT
privileges when using WITH DATA. Materialized views are not part of the
standard, but similarly, this check can be confusing as this refers to
an access check on a table created within the same command as the one
that would insert data into this table.
This commit removes the INSERT privilege check for WITH DATA, the
default, that 846005e removed partially, but only for WITH NO DATA.
Author: Bharath Rupireddy
Discussion: https://postgr.es/m/d049c272-9a47-d783-46b0-46665b011598@enterprisedb.com
This feature was added a long time ago, in 7c1e67bd5 and eb121ba2c,
but never documented in any user-facing way. (Documentation added
in 6126d3e70 was commented out almost immediately, in 8272fc3f7.)
That's because, while this syntax is defined by SQL:99, our
implementation is only vaguely related to the standard's semantics.
The standard appears to intend a run-time not parse-time test, and
it definitely intends that the test should understand subtype
relationships.
No one has stepped up to fix that in the intervening years, but
people keep coming across the code and asking why it's not documented.
Let's just get rid of it: if anyone ever wants to make it work per
spec, they can easily recover whatever parts of this code are still
of value from our git history.
If there's anyone out there who's actually using this despite its
undocumented status, they can switch to using pg_typeof() instead,
eg. "pg_typeof(something) = 'mytype'::regtype". That gives
essentially the same semantics as what our IS OF code did.
(We didn't have that function last time this was discussed, or
we would have ripped out IS OF then.)
Discussion: https://postgr.es/m/CAKFQuwZ2pTc-DSkOiTfjauqLYkNREeNZvWmeg12Q-_69D+sYZA@mail.gmail.com
Discussion: https://postgr.es/m/BAY20-F23E9F2B4DAB3E4E88D3623F99B0@phx.gbl
Discussion: https://postgr.es/m/3E7CF81D.1000203@joeconway.com
Commit 502898192 was too careless about the order of execution of the
additional ALTER TABLE operations generated by expandTableLikeClause.
It just stuck them all at the end, which seems okay for most purposes.
But it falls down in the case where LIKE is importing a primary key
or unique index and the outer CREATE TABLE includes a FOREIGN KEY
constraint that needs to depend on that index. Weird as that is,
it used to work, so we ought to keep it working.
To fix, make parse_utilcmd.c insert LIKE clauses between index-creation
and FK-creation commands in the transformed list of commands, and change
utility.c so that the commands generated by expandTableLikeClause are
executed immediately not at the end. One could imagine scenarios where
this wouldn't work either; but currently expandTableLikeClause only
makes column default expressions, CHECK constraints, and indexes, and
this ordering seems fine for those.
Per bug #16730 from Sofoklis Papasofokli. Like the previous patch,
back-patch to all supported branches.
Discussion: https://postgr.es/m/16730-b902f7e6e0276b30@postgresql.org
In 01e658fa74, the hash_func test
creates a type t1, but apparently a test running in parallel might
also use that name, depending on timing. Rename the type to avoid the
issue.
Add hash functions for the record type as well as a hash operator
family and operator class for the record type. This enables all the
hash functionality for the record type such as hash-based plans for
UNION/INTERSECT/EXCEPT DISTINCT, recursive queries using UNION
DISTINCT, hash joins, and hash partitioning.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/38eccd35-4e2d-6767-1b3c-dada1eac3124%402ndquadrant.com
- Test hashing of an array of a non-hashable element type.
- Test UNION [DISTINCT] with hash- and sort-based plans. (Previously,
only INTERSECT and EXCEPT where tested there.)
- Test UNION [DISTINCT] with a non-hashable column type. This
currently reverts to a sort-based plan even if enable_hashagg is on.
- Test UNION/INTERSECT/EXCEPT hash- and sort-based plans with arrays
as column types. Also test an array with a non-hashable element
type.
- Test UNION/INTERSECT/EXCEPT similarly with row types as column
types. Currently, this uses only sort-based plans because there is
no hashing support for row types.
- Add a test case that shows that recursive queries using UNION
[DISTINCT] require hashable column types.
- Add a currently failing test that uses UNION DISTINCT in a
cycle-detection use case using row types as column types.
Discussion: https://www.postgresql.org/message-id/flat/38eccd35-4e2d-6767-1b3c-dada1eac3124%402ndquadrant.com
Since this function is used as a CHECK constraint condition,
returning NULL is tantamount to returning TRUE, which would have the
effect of letting in a row that doesn't satisfy the hash condition.
Admittedly, the cases for which this is done should be unreachable
in practice, but that doesn't make it any less a bad idea. It also
seems like a dartboard was used to decide which error cases should
throw errors as opposed to returning NULL.
For the checks for NULL input values, I just switched it to returning
false. There's some argument that an error would be better; but the
case really should be can't-happen in a generated hash constraint,
so it's likely not worth more code for.
For the parent-relation-open-failure case, it seems like we might
as well let relation_open throw an error, instead of having an
impossible-to-diagnose constraint failure.
Back-patch to v11 where this code came in.
Discussion: https://postgr.es/m/24067.1605134819@sss.pgh.pa.us
When specified, WITH NO DATA does not insert any data into the relation
created, so skip checking for the insert permissions. With WITH DATA or
WITH NO DATA, it is always required for the user to have CREATE
privileges on the schema targeted for the relation.
Note that plain CREATE TABLE AS or CREATE MATERIALIZED VIEW queries have
begun to work accidentally without INSERT privilege checks as of
874fe3ae, while using EXECUTE or EXPLAIN ANALYZE would fail with the ACL
check, so this makes the behavior for all the command flavors consistent
with each other. This is arguably a bug fix, but there have been no
complaints about the current behavior either so stable branches are not
changed.
While on it, document properly the privileges requirements for each
commands with more tests for all the scenarios possible, and avoid a
useless bulk-insert allocation when using WITH NO DATA.
Author: Bharath Rupireddy
Reviewed-by: Anastasia Lubennikova, Michael Paquier
Discussion: https://postgr.es/m/CALj2ACWc3N8j0_9nMPz9wcAUnVcdKHzFdDZJ3hVFNEbqtcyG9w@mail.gmail.com
This is mostly straightforward. However, we disallow replacing
constraint triggers or changing the is-constraint property; perhaps
that can be added later, but the complexity versus benefit tradeoff
doesn't look very good.
Also, no special thought is taken here for whether replacing an
existing trigger should result in changes to queued-but-not-fired
trigger actions. We just document that if you're surprised by the
results, too bad, don't do that. (Note that any such pending trigger
activity would have to be within the current session.)
Takamichi Osumi, reviewed at various times by Surafel Temesgen,
Peter Smith, and myself
Discussion: https://postgr.es/m/0DDF369B45A1B44B8A687ED43F06557C010BC362@G01JPEXMBYT03
This provides a handy way to get, say, the last field of the string.
Use of a negative index in this way has precedent in the nearby
left() and right() functions.
The implementation scans the string twice when N < -1, but it seems
likely that N = -1 will be the huge majority of actual use cases,
so I'm not really excited about adding complexity to avoid that.
Nikhil Benesch, reviewed by Jacob Champion; cosmetic tweakage by me
Discussion: https://postgr.es/m/cbb7f861-6162-3a51-9823-97bc3aa0b638@gmail.com
