Most of these had been obsoleted by 568d4138c / the SnapshotNow
removal.
This is is preparation for moving most of tqual.[ch] into either
snapmgr.h or heapam.h, which in turn is in preparation for pluggable
table AMs.
Author: Andres Freund
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
heapam.h previously was included in a number of widely used
headers (e.g. execnodes.h, indirectly in executor.h, ...). That's
problematic on its own, as heapam.h contains a lot of low-level
details that don't need to be exposed that widely, but becomes more
problematic with the upcoming introduction of pluggable table storage
- it seems inappropriate for heapam.h to be included that widely
afterwards.
heapam.h was largely only included in other headers to get the
HeapScanDesc typedef (which was defined in heapam.h, even though
HeapScanDescData is defined in relscan.h). The better solution here
seems to be to just use the underlying struct (forward declared where
necessary). Similar for BulkInsertState.
Another problem was that LockTupleMode was used in executor.h - parts
of the file tried to cope without heapam.h, but due to the fact that
it indirectly included it, several subsequent violations of that goal
were not not noticed. We could just reuse the approach of declaring
parameters as int, but it seems nicer to move LockTupleMode to
lockoptions.h - that's not a perfect location, but also doesn't seem
bad.
As a number of files relied on implicitly included heapam.h, a
significant number of files grew an explicit include. It's quite
probably that a few external projects will need to do the same.
Author: Andres Freund
Reviewed-By: Alvaro Herrera
Discussion: https://postgr.es/m/20190114000701.y4ttcb74jpskkcfb@alap3.anarazel.de
Previously tables declared WITH OIDS, including a significant fraction
of the catalog tables, stored the oid column not as a normal column,
but as part of the tuple header.
This special column was not shown by default, which was somewhat odd,
as it's often (consider e.g. pg_class.oid) one of the more important
parts of a row. Neither pg_dump nor COPY included the contents of the
oid column by default.
The fact that the oid column was not an ordinary column necessitated a
significant amount of special case code to support oid columns. That
already was painful for the existing, but upcoming work aiming to make
table storage pluggable, would have required expanding and duplicating
that "specialness" significantly.
WITH OIDS has been deprecated since 2005 (commit ff02d0a05280e0).
Remove it.
Removing includes:
- CREATE TABLE and ALTER TABLE syntax for declaring the table to be
WITH OIDS has been removed (WITH (oids[ = true]) will error out)
- pg_dump does not support dumping tables declared WITH OIDS and will
issue a warning when dumping one (and ignore the oid column).
- restoring an pg_dump archive with pg_restore will warn when
restoring a table with oid contents (and ignore the oid column)
- COPY will refuse to load binary dump that includes oids.
- pg_upgrade will error out when encountering tables declared WITH
OIDS, they have to be altered to remove the oid column first.
- Functionality to access the oid of the last inserted row (like
plpgsql's RESULT_OID, spi's SPI_lastoid, ...) has been removed.
The syntax for declaring a table WITHOUT OIDS (or WITH (oids = false)
for CREATE TABLE) is still supported. While that requires a bit of
support code, it seems unnecessary to break applications / dumps that
do not use oids, and are explicit about not using them.
The biggest user of WITH OID columns was postgres' catalog. This
commit changes all 'magic' oid columns to be columns that are normally
declared and stored. To reduce unnecessary query breakage all the
newly added columns are still named 'oid', even if a table's column
naming scheme would indicate 'reloid' or such. This obviously
requires adapting a lot code, mostly replacing oid access via
HeapTupleGetOid() with access to the underlying Form_pg_*->oid column.
The bootstrap process now assigns oids for all oid columns in
genbki.pl that do not have an explicit value (starting at the largest
oid previously used), only oids assigned later by oids will be above
FirstBootstrapObjectId. As the oid column now is a normal column the
special bootstrap syntax for oids has been removed.
Oids are not automatically assigned during insertion anymore, all
backend code explicitly assigns oids with GetNewOidWithIndex(). For
the rare case that insertions into the catalog via SQL are called for
the new pg_nextoid() function can be used (which only works on catalog
tables).
The fact that oid columns on system tables are now normal columns
means that they will be included in the set of columns expanded
by * (i.e. SELECT * FROM pg_class will now include the table's oid,
previously it did not). It'd not technically be hard to hide oid
column by default, but that'd mean confusing behavior would either
have to be carried forward forever, or it'd cause breakage down the
line.
While it's not unlikely that further adjustments are needed, the
scope/invasiveness of the patch makes it worthwhile to get merge this
now. It's painful to maintain externally, too complicated to commit
after the code code freeze, and a dependency of a number of other
patches.
Catversion bump, for obvious reasons.
Author: Andres Freund, with contributions by John Naylor
Discussion: https://postgr.es/m/20180930034810.ywp2c7awz7opzcfr@alap3.anarazel.de
This speeds up write operations (INSERT, UPDATE, DELETE, COPY, as well
as the future MERGE) on partitioned tables.
This changes the setup for tuple routing so that it does far less work
during the initial setup and pushes more work out to when partitions
receive tuples. PartitionDispatchData structs for sub-partitioned
tables are only created when a tuple gets routed through it. The
possibly large arrays in the PartitionTupleRouting struct have largely
been removed. The partitions[] array remains but now never contains any
NULL gaps. Previously the NULLs had to be skipped during
ExecCleanupTupleRouting(), which could add a large overhead to the
cleanup when the number of partitions was large. The partitions[] array
is allocated small to start with and only enlarged when we route tuples
to enough partitions that it runs out of space. This allows us to keep
simple single-row partition INSERTs running quickly. Redesign
The arrays in PartitionTupleRouting which stored the tuple translation maps
have now been removed. These have been moved out into a
PartitionRoutingInfo struct which is an additional field in ResultRelInfo.
The find_all_inheritors() call still remains by far the slowest part of
ExecSetupPartitionTupleRouting(). This commit just removes the other slow
parts.
In passing also rename the tuple translation maps from being ParentToChild
and ChildToParent to being RootToPartition and PartitionToRoot. The old
names mislead you into thinking that a partition of some sub-partitioned
table would translate to the rowtype of the sub-partitioned table rather
than the root partitioned table.
Authors: David Rowley and Amit Langote, heavily revised by Álvaro Herrera
Testing help from Jesper Pedersen and Kato Sho.
Discussion: https://postgr.es/m/CAKJS1f_1RJyFquuCKRFHTdcXqoPX-PYqAd7nz=GVBwvGh4a6xA@mail.gmail.com
Upcoming work intends to allow pluggable ways to introduce new ways of
storing table data. Accessing those table access methods from the
executor requires TupleTableSlots to be carry tuples in the native
format of such storage methods; otherwise there'll be a significant
conversion overhead.
Different access methods will require different data to store tuples
efficiently (just like virtual, minimal, heap already require fields
in TupleTableSlot). To allow that without requiring additional pointer
indirections, we want to have different structs (embedding
TupleTableSlot) for different types of slots. Thus different types of
slots are needed, which requires adapting creators of slots.
The slot that most efficiently can represent a type of tuple in an
executor node will often depend on the type of slot a child node
uses. Therefore we need to track the type of slot is returned by
nodes, so parent slots can create slots based on that.
Relatedly, JIT compilation of tuple deforming needs to know which type
of slot a certain expression refers to, so it can create an
appropriate deforming function for the type of tuple in the slot.
But not all nodes will only return one type of slot, e.g. an append
node will potentially return different types of slots for each of its
subplans.
Therefore add function that allows to query the type of a node's
result slot, and whether it'll always be the same type (whether it's
fixed). This can be queried using ExecGetResultSlotOps().
The scan, result, inner, outer type of slots are automatically
inferred from ExecInitScanTupleSlot(), ExecInitResultSlot(),
left/right subtrees respectively. If that's not correct for a node,
that can be overwritten using new fields in PlanState.
This commit does not introduce the actually abstracted implementation
of different kind of TupleTableSlots, that will be left for a followup
commit. The different types of slots introduced will, for now, still
use the same backing implementation.
While this already partially invalidates the big comment in
tuptable.h, it seems to make more sense to update it later, when the
different TupleTableSlot implementations actually exist.
Author: Ashutosh Bapat and Andres Freund, with changes by Amit Khandekar
Discussion: https://postgr.es/m/20181105210039.hh4vvi4vwoq5ba2q@alap3.anarazel.de
Previously materializing a slot always returned a HeapTuple. As
current work aims to reduce the reliance on HeapTuples (so other
storage systems can work efficiently), that needs to change. Thus
split the tasks of materializing a slot (i.e. making it independent
from the underlying storage / other memory contexts) from fetching a
HeapTuple from the slot. For brevity, allow to fetch a HeapTuple from
a slot and materializing the slot at the same time, controlled by a
parameter.
For now some callers of ExecFetchSlotHeapTuple, with materialize =
true, expect that changes to the heap tuple will be reflected in the
underlying slot. Those places will be adapted in due course, so while
not pretty, that's OK for now.
Also rename ExecFetchSlotTuple to ExecFetchSlotHeapTupleDatum and
ExecFetchSlotTupleDatum to ExecFetchSlotHeapTupleDatum, as it's likely
that future storage methods will need similar methods. There already
is ExecFetchSlotMinimalTuple, so the new names make the naming scheme
more coherent.
Author: Ashutosh Bapat and Andres Freund, with changes by Amit Khandekar
Discussion: https://postgr.es/m/20181105210039.hh4vvi4vwoq5ba2q@alap3.anarazel.de
es_leaf_result_relations doesn't exist; perhaps this was an old name
for es_tuple_routing_result_relations, or maybe this comment has gone
unmaintained through multiple rounds of whacking the code around.
Related comment in execnodes.h was both obsolete and ungrammatical.
If there are many ExecRowMark structs, we spent O(N^2) time in
ExecFindRowMark during executor startup. Once upon a time this was
not of great concern, but the addition of native partitioning has
squeezed out enough other costs that this can become the dominant
overhead in some use-cases for tables with many partitions.
To fix, simply replace that List data structure with an array.
This adds a little bit of cost to execCurrentOf(), but not much,
and anyway that code path is neither of large importance nor very
efficient now. If we ever decide it is a bottleneck, constructing a
hash table for lookup-by-tableoid would likely be the thing to do.
Per complaint from Amit Langote, though this is different from
his fix proposal.
Discussion: https://postgr.es/m/468c85d9-540e-66a2-1dde-fec2b741e688@lab.ntt.co.jp
Commit 9a3cebeaa changed things so that parallel workers didn't obtain
any lock of their own on tables they access. That was clearly a bad
idea, but I'd mistakenly supposed that it was the intended end result
of the series of patches for simplifying the executor's lock management.
Undo that change in relation_open(), and adjust ExecOpenScanRelation()
so that it gets the correct lock if inside a parallel worker.
In passing, clean up some more obsolete comments about when locks
are acquired.
Discussion: https://postgr.es/m/468c85d9-540e-66a2-1dde-fec2b741e688@lab.ntt.co.jp
We already have appropriate locks on every relation listed in the
query's rangetable before we reach the executor. Take the next step
in exploiting that knowledge by removing code that worries about
taking locks on non-leaf result relations in a partitioned table.
In particular, get rid of ExecLockNonLeafAppendTables and a stanza in
InitPlan that asserts we already have locks on certain such tables.
In passing, clean up some now-obsolete comments in InitPlan.
Amit Langote, reviewed by David Rowley and Jesper Pedersen,
and whacked around a bit more by me
Discussion: https://postgr.es/m/468c85d9-540e-66a2-1dde-fec2b741e688@lab.ntt.co.jp
Instead of doing a lot of list_nth() accesses to es_range_table,
create a flattened pointer array during executor startup and index
into that to get at individual RangeTblEntrys.
This eliminates one source of O(N^2) behavior with lots of partitions.
(I'm not exactly convinced that it's the most important source, but
it's an easy one to fix.)
Amit Langote and David Rowley
Discussion: https://postgr.es/m/468c85d9-540e-66a2-1dde-fec2b741e688@lab.ntt.co.jp
Create an array estate->es_relations[] paralleling the es_range_table,
and store references to Relations (relcache entries) there, so that any
given RT entry is opened and closed just once per executor run. Scan
nodes typically still call ExecOpenScanRelation, but ExecCloseScanRelation
is no more; relation closing is now done centrally in ExecEndPlan.
This is slightly more complex than one would expect because of the
interactions with relcache references held in ResultRelInfo nodes.
The general convention is now that ResultRelInfo->ri_RelationDesc does
not represent a separate relcache reference and so does not need to be
explicitly closed; but there is an exception for ResultRelInfos in the
es_trig_target_relations list, which are manufactured by
ExecGetTriggerResultRel and have to be cleaned up by
ExecCleanUpTriggerState. (That much was true all along, but these
ResultRelInfos are now more different from others than they used to be.)
To allow the partition pruning logic to make use of es_relations[] rather
than having its own relcache references, adjust PartitionedRelPruneInfo
to store an RT index rather than a relation OID.
Amit Langote, reviewed by David Rowley and Jesper Pedersen,
some mods by me
Discussion: https://postgr.es/m/468c85d9-540e-66a2-1dde-fec2b741e688@lab.ntt.co.jp
Instead of locking tables during executor startup, just Assert that
suitable locks were obtained already during the parse/plan pipeline
(or re-obtained by the plan cache). This must be so, else we have a
hazard that concurrent DDL has invalidated the plan.
This is pretty inefficient as well as undercommented, but it's all going
to go away shortly, so I didn't try hard. This commit is just another
attempt to use the buildfarm to see if we've missed anything in the plan
to simplify the executor's table management.
Note that the change needed here in relation_open() exposes that
parallel workers now really are accessing tables without holding any
lock of their own, whereas they were not doing that before this commit.
This does not give me a warm fuzzy feeling about that aspect of parallel
query; it does not seem like a good design, and we now know that it's
had exactly no actual testing. I think that we should modify parallel
query so that that change can be reverted.
Discussion: https://postgr.es/m/468c85d9-540e-66a2-1dde-fec2b741e688@lab.ntt.co.jp
I (Andres) was more than a bit hasty in committing 33001fd7a7
after last minute changes, leading to a number of problems (jit output
was only shown for JIT in parallel workers, and just EXPLAIN without
ANALYZE didn't work). Lukas luckily found these issues quickly.
Instead of combining instrumentation in in standard_ExecutorEnd(), do
so on demand in the new ExplainPrintJITSummary().
Also update a documentation example of the JIT output, changed in
52050ad8eb.
Author: Lukas Fittl, with minor changes by me
Discussion: https://postgr.es/m/CAP53PkxmgJht69pabxBXJBM+0oc6kf3KHMborLP7H2ouJ0CCtQ@mail.gmail.com
Backpatch: 11, where JIT compilation was introduced
Instead of recomputing the required lock levels in all these places,
just use what commit fdba460a2 made the parser store in the RTE fields.
This already simplifies the code measurably in these places, and
follow-on changes will remove a bunch of no-longer-needed infrastructure.
In a few cases, this change causes us to acquire a higher lock level
than we did before. This is OK primarily because said higher lock level
should've been acquired already at query parse time; thus, we're saving
a useless extra trip through the shared lock manager to acquire a lesser
lock alongside the original lock. The only known exception to this is
that re-execution of a previously planned SELECT FOR UPDATE/SHARE query,
for a table that uses ROW_MARK_REFERENCE or ROW_MARK_COPY methods, might
have gotten only AccessShareLock before. Now it will get RowShareLock
like the first execution did, which seems fine.
While there's more to do, push it in this state anyway, to let the
buildfarm help verify that nothing bad happened.
Amit Langote, reviewed by David Rowley and Jesper Pedersen,
and whacked around a bit more by me
Discussion: https://postgr.es/m/468c85d9-540e-66a2-1dde-fec2b741e688@lab.ntt.co.jp
It's inefficient to use a single slot for mapping between tuple
descriptors for multiple tuples, as previously done when using
ConvertPartitionTupleSlot(), as that means the slot's tuple descriptors
change for every tuple.
Previously we also, via ConvertPartitionTupleSlot(), built new tuples
after the mapping even in cases where we, immediately afterwards,
access individual columns again.
Refactor the code so one slot, on demand, is used for each
partition. That avoids having to change the descriptor (and allows to
use the more efficient "fixed" tuple slots). Then use slot->slot
mapping, to avoid unnecessarily forming a tuple.
As the naming between the tuple and slot mapping functions wasn't
consistent, rename them to execute_attr_map_{tuple,slot}. It's likely
that we'll also rename convert_tuples_by_* to denote that these
functions "only" build a map, but that's left for later.
Author: Amit Khandekar and Amit Langote, editorialized by me
Reviewed-By: Amit Langote, Amit Khandekar, Andres Freund
Discussion:
https://postgr.es/m/CAJ3gD9fR0wRNeAE8VqffNTyONS_UfFPRpqxhnD9Q42vZB+Jvpg@mail.gmail.comhttps://postgr.es/m/e4f9d743-cd4b-efb0-7574-da21d86a7f36%40lab.ntt.co.jp
Backpatch: -
Add RangeTblEntry.rellockmode, which records the appropriate lock mode for
each RTE_RELATION rangetable entry (either AccessShareLock, RowShareLock,
or RowExclusiveLock depending on the RTE's role in the query).
This patch creates the field and makes all creators of RTE nodes fill it
in reasonably, but for the moment nothing much is done with it. The plan
is to replace assorted post-parser logic that re-determines the right
lockmode to use with simple uses of rte->rellockmode. For now, just add
Asserts in each of those places that the rellockmode matches what they are
computing today. (In some cases the match isn't perfect, so the Asserts
are weaker than you might expect; but this seems OK, as per discussion.)
This passes check-world for me, but it seems worth pushing in this state
to see if the buildfarm finds any problems in cases I failed to test.
catversion bump due to change of stored rules.
Amit Langote, reviewed by David Rowley and Jesper Pedersen,
and whacked around a bit more by me
Discussion: https://postgr.es/m/468c85d9-540e-66a2-1dde-fec2b741e688@lab.ntt.co.jp
Upcoming changes introduce further types of tuple table slots, in
preparation of making table storage pluggable. New storage methods
will have different representation of tuples, therefore the slot
accessor should refer explicitly to heap tuples.
Instead of just renaming the functions, split it into one function
that accepts heap tuples not residing in buffers, and one accepting
ones in buffers. Previously one function was used for both, but that
was a bit awkward already, and splitting will allow us to represent
slot types for tuples in buffers and normal memory separately.
This is split out from the patch introducing abstract slots, as this
largely consists out of mechanical changes.
Author: Ashutosh Bapat
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/20180220224318.gw4oe5jadhpmcdnm@alap3.anarazel.de
Previously, when using parallel query, EXPLAIN (ANALYZE)'s JIT
compilation timings did not include the overhead from doing so on the
workers. Fix that.
We do so by simply aggregating the cost of doing JIT compilation on
workers and the leader together. Arguably that's not quite accurate,
because the total time spend doing so is spent in parallel - but it's
hard to do much better. For additional detail, when VERBOSE is
specified, the stats for workers are displayed separately.
Author: Amit Khandekar and Andres Freund
Discussion: https://postgr.es/m/CAJ3gD9eLrz51RK_gTkod+71iDcjpB_N8eC6vU2AW-VicsAERpQ@mail.gmail.com
Backpatch: 11-
The EvalPlanQual machinery assumes that any initplans (that is,
uncorrelated sub-selects) used during an EPQ recheck would have already
been evaluated during the main query; this is implicit in the fact that
execPlan pointers are not copied into the EPQ estate's es_param_exec_vals.
But it's possible for that assumption to fail, if the initplan is only
reached conditionally. For example, a sub-select inside a CASE expression
could be reached during a recheck when it had not been previously, if the
CASE test depends on a column that was just updated.
This bug is old, appearing to date back to my rewrite of EvalPlanQual in
commit 9f2ee8f28, but was not detected until Kyle Samson reported a case.
To fix, force all not-yet-evaluated initplans used within the EPQ plan
subtree to be evaluated at the start of the recheck, before entering the
EPQ environment. This could be inefficient, if such an initplan is
expensive and goes unused again during the recheck --- but that's piling
one layer of improbability atop another. It doesn't seem worth adding
more complexity to prevent that, at least not in the back branches.
It was convenient to use the new-in-v11 ExecEvalParamExecParams function
to implement this, but I didn't like either its name or the specifics of
its API, so revise that.
Back-patch all the way. Rather than rewrite the patch to avoid depending
on bms_next_member() in the oldest branches, I chose to back-patch that
function into 9.4 and 9.3. (This isn't the first time back-patches have
needed that, and it exhausted my patience.) I also chose to back-patch
some test cases added by commits 71404af2a and 342a1ffa2 into 9.4 and 9.3,
so that the 9.x versions of eval-plan-qual.spec are all the same.
Andrew Gierth diagnosed the problem and contributed the added test cases,
though the actual code changes are by me.
Discussion: https://postgr.es/m/A033A40A-B234-4324-BE37-272279F7B627@tripadvisor.com
Currently, we release the asynchronous resources as soon as it is evident
that no more rows will be needed e.g. when a Limit is filled. This can be
problematic especially for custom and foreign scans where we can scan
backward. Fix that by disallowing the shutting down of resources in such
cases.
Reported-by: Robert Haas
Analysed-by: Robert Haas and Amit Kapila
Author: Amit Kapila
Reviewed-by: Robert Haas
Backpatch-through: 9.6 where this code was introduced
Discussion: https://postgr.es/m/86137f17-1dfb-42f9-7421-82fd786b04a1@anayrat.info
These changes were put in at some stage of the development process, but
are unnecessary and should not have made it into the final patch. Mea
culpa.
Per gripe from Andreas Freund
Backpatch to REL_11_STABLE
Due to inlining it previously was possible that an ExprContext's
shutdown callback pointed to a JITed function. As the JIT context
previously was shut down before the shutdown callbacks were called,
that could lead to segfaults. Fix the ordering.
Reported-By: Dmitry Dolgov
Author: Andres Freund
Discussion: https://postgr.es/m/CA+q6zcWO7CeAJtHBxgcHn_hj+PenM=tvG0RJ93X1uEJ86+76Ug@mail.gmail.com
Backpatch: 11-, where JIT compilation was added
Starting with commit f0e44751d7, ExecConstraints was in charge of
running the partition constraint; commit 19c47e7c82 modified that so
that caller could request to skip that checking depending on some
conditions, but that commit and 15ce775faa together introduced a small
bug there which caused ExecInsert to request skipping the constraint
check but have this not be honored -- in effect doing the check twice.
This could have been fixed in a very small patch, but on further
analysis of the involved function and its callsites, it turns out to be
simpler to give the responsibility of checking the partition constraint
fully to the caller, and return ExecConstraints to its original
(pre-partitioning) shape where it only checked tuple descriptor-related
constraints. Each caller must do partition constraint checking on its
own schedule, which is more convenient after commit 2f17844104 anyway.
Reported-by: David Rowley
Author: David Rowley, Álvaro Herrera
Reviewed-by: Amit Langote, Amit Khandekar, Simon Riggs
Discussion: https://postgr.es/m/CAKJS1f8w8+awsxgea8wt7_UX8qzOQ=Tm1LD+U1fHqBAkXxkW2w@mail.gmail.com
Recent gcc can warn about switch-case fall throughs that are not
explicitly labeled as intentional. This seems like a good thing,
so clean up the warnings exposed thereby by labeling all such
cases with comments that gcc will recognize.
In files that already had one or more suitable comments, I generally
matched the existing style of those. Otherwise I went with
/* FALLTHROUGH */, which is one of the spellings approved at the
more-restrictive-than-default level -Wimplicit-fallthrough=4.
(At the default level you can also spell it /* FALL ?THRU */,
and it's not picky about case. What you can't do is include
additional text in the same comment, so some existing comments
containing versions of this aren't good enough.)
Testing with gcc 8.0.1 (Fedora 28's current version), I found that
I also had to put explicit "break"s after elog(ERROR) or ereport(ERROR);
apparently, for this purpose gcc doesn't recognize that those don't
return. That seems like possibly a gcc bug, but it's fine because
in most places we did that anyway; so this amounts to a visit from the
style police.
Discussion: https://postgr.es/m/15083.1525207729@sss.pgh.pa.us
This reverts commits d204ef6377,
83454e3c2b and a few more commits thereafter
(complete list at the end) related to MERGE feature.
While the feature was fully functional, with sufficient test coverage and
necessary documentation, it was felt that some parts of the executor and
parse-analyzer can use a different design and it wasn't possible to do that in
the available time. So it was decided to revert the patch for PG11 and retry
again in the future.
Thanks again to all reviewers and bug reporters.
List of commits reverted, in reverse chronological order:
f1464c5380 Improve parse representation for MERGE
ddb4158579 MERGE syntax diagram correction
530e69e59b Allow cpluspluscheck to pass by renaming variable
01b88b4df5 MERGE minor errata
3af7b2b0d4 MERGE fix variable warning in non-assert builds
a5d86181ec MERGE INSERT allows only one VALUES clause
4b2d44031f MERGE post-commit review
4923550c20 Tab completion for MERGE
aa3faa3c7a WITH support in MERGE
83454e3c2b New files for MERGE
d204ef6377 MERGE SQL Command following SQL:2016
Author: Pavan Deolasee
Reviewed-by: Michael Paquier
When an update moves a row between partitions (supported since
2f17844104), our normal logic for following update chains in READ
COMMITTED mode doesn't work anymore. Cross partition updates are
modeled as an delete from the old and insert into the new
partition. No ctid chain exists across partitions, and there's no
convenient space to introduce that link.
Not throwing an error in a partitioned context when one would have
been thrown without partitioning is obviously problematic. This commit
introduces infrastructure to detect when a tuple has been moved, not
just plainly deleted. That allows to throw an error when encountering
a deletion that's actually a move, while attempting to following a
ctid chain.
The row deleted as part of a cross partition update is marked by
pointing it's t_ctid to an invalid block, instead of self as a normal
update would. That was deemed to be the least invasive and most
future proof way to represent the knowledge, given how few infomask
bits are there to be recycled (there's also some locking issues with
using infomask bits).
External code following ctid chains should be updated to check for
moved tuples. The most likely consequence of not doing so is a missed
error.
Author: Amul Sul, editorialized by me
Reviewed-By: Amit Kapila, Pavan Deolasee, Andres Freund, Robert Haas
Discussion: http://postgr.es/m/CAAJ_b95PkwojoYfz0bzXU8OokcTVGzN6vYGCNVUukeUDrnF3dw@mail.gmail.com
Also enable this for postgres_fdw.
Etsuro Fujita, based on an earlier patch by Amit Langote. The larger
patch series of which this is a part has been reviewed by Amit
Langote, David Fetter, Maksim Milyutin, Álvaro Herrera, Stephen Frost,
and me. Minor documentation changes to the final version by me.
Discussion: http://postgr.es/m/29906a26-da12-8c86-4fb9-d8f88442f2b9@lab.ntt.co.jp
MERGE performs actions that modify rows in the target table
using a source table or query. MERGE provides a single SQL
statement that can conditionally INSERT/UPDATE/DELETE rows
a task that would other require multiple PL statements.
e.g.
MERGE INTO target AS t
USING source AS s
ON t.tid = s.sid
WHEN MATCHED AND t.balance > s.delta THEN
UPDATE SET balance = t.balance - s.delta
WHEN MATCHED THEN
DELETE
WHEN NOT MATCHED AND s.delta > 0 THEN
INSERT VALUES (s.sid, s.delta)
WHEN NOT MATCHED THEN
DO NOTHING;
MERGE works with regular and partitioned tables, including
column and row security enforcement, as well as support for
row, statement and transition triggers.
MERGE is optimized for OLTP and is parameterizable, though
also useful for large scale ETL/ELT. MERGE is not intended
to be used in preference to existing single SQL commands
for INSERT, UPDATE or DELETE since there is some overhead.
MERGE can be used statically from PL/pgSQL.
MERGE does not yet support inheritance, write rules,
RETURNING clauses, updatable views or foreign tables.
MERGE follows SQL Standard per the most recent SQL:2016.
Includes full tests and documentation, including full
isolation tests to demonstrate the concurrent behavior.
This version written from scratch in 2017 by Simon Riggs,
using docs and tests originally written in 2009. Later work
from Pavan Deolasee has been both complex and deep, leaving
the lead author credit now in his hands.
Extensive discussion of concurrency from Peter Geoghegan,
with thanks for the time and effort contributed.
Various issues reported via sqlsmith by Andreas Seltenreich
Authors: Pavan Deolasee, Simon Riggs
Reviewer: Peter Geoghegan, Amit Langote, Tomas Vondra, Simon Riggs
Discussion:
https://postgr.es/m/CANP8+jKitBSrB7oTgT9CY2i1ObfOt36z0XMraQc+Xrz8QB0nXA@mail.gmail.comhttps://postgr.es/m/CAH2-WzkJdBuxj9PO=2QaO9-3h3xGbQPZ34kJH=HukRekwM-GZg@mail.gmail.com
Currently adding a column to a table with a non-NULL default results in
a rewrite of the table. For large tables this can be both expensive and
disruptive. This patch removes the need for the rewrite as long as the
default value is not volatile. The default expression is evaluated at
the time of the ALTER TABLE and the result stored in a new column
(attmissingval) in pg_attribute, and a new column (atthasmissing) is set
to true. Any existing row when fetched will be supplied with the
attmissingval. New rows will have the supplied value or the default and
so will never need the attmissingval.
Any time the table is rewritten all the atthasmissing and attmissingval
settings for the attributes are cleared, as they are no longer needed.
The most visible code change from this is in heap_attisnull, which
acquires a third TupleDesc argument, allowing it to detect a missing
value if there is one. In many cases where it is known that there will
not be any (e.g. catalog relations) NULL can be passed for this
argument.
Andrew Dunstan, heavily modified from an original patch from Serge
Rielau.
Reviewed by Tom Lane, Andres Freund, Tomas Vondra and David Rowley.
Discussion: https://postgr.es/m/31e2e921-7002-4c27-59f5-51f08404c858@2ndQuadrant.com
Commit eb7ed3f306 enabled unique constraints on partitioned tables,
but one thing that was not working properly is INSERT/ON CONFLICT.
This commit introduces a new node keeps state related to the ON CONFLICT
clause per partition, and fills it when that partition is about to be
used for tuple routing.
Author: Amit Langote, Álvaro Herrera
Reviewed-by: Etsuro Fujita, Pavan Deolasee
Discussion: https://postgr.es/m/20180228004602.cwdyralmg5ejdqkq@alvherre.pgsql
Coverity complained that this check is pointless, and it's right.
There is no case where we'd call ExecutorStart with a null plannedstmt,
and if we did, it'd have crashed before here. Thinko in commit cc415a56d.
This adds simple cost based plan time decision about whether JIT
should be performed. jit_above_cost, jit_optimize_above_cost are
compared with the total cost of a plan, and if the cost is above them
JIT is performed / optimization is performed respectively.
For that PlannedStmt and EState have a jitFlags (es_jit_flags) field
that stores information about what JIT operations should be performed.
EState now also has a new es_jit field, which can store a
JitContext. When there are no errors the context is released in
standard_ExecutorEnd().
It is likely that the default values for jit_[optimize_]above_cost
will need to be adapted further, but in my test these values seem to
work reasonably.
Author: Andres Freund, with feedback by Peter Eisentraut
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
The reason for doing so is that it will allow expression evaluation to
optimize based on the underlying tupledesc. In particular it will
allow to JIT tuple deforming together with the expression itself.
For that expression initialization needs to be moved after the
relevant slots are initialized - mostly unproblematic, except in the
case of nodeWorktablescan.c.
After doing so there's no need for ExecAssignResultType() and
ExecAssignResultTypeFromTL() anymore, as all former callers have been
converted to create a slot with a fixed descriptor.
When creating a slot with a fixed descriptor, tts_values/isnull can be
allocated together with the main slot, reducing allocation overhead
and increasing cache density a bit.
Author: Andres Freund
Discussion: https://postgr.es/m/20171206093717.vqdxe5icqttpxs3p@alap3.anarazel.de
Doing so causes EXPLAIN ANALYZE to show trigger statistics multiple
times. Commit 2f17844104 seems to
be to blame for this.
Amit Langote, revieed by Amit Khandekar, Etsuro Fujita, and me.
AclObjectKind was basically just another enumeration for object types,
and we already have a preferred one for that. It's only used in
aclcheck_error. By using ObjectType instead, we can also give some more
precise error messages, for example "index" instead of "relation".
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
At present, we always raise an ERROR if the partition constraint
is violated, but a pending patch for UPDATE tuple routing will
consider instead moving the tuple to the correct partition.
Refactor to make that simpler.
Amit Khandekar, reviewed by Amit Langote, David Rowley, and me.
Discussion: http://postgr.es/m/CAJ3gD9cue54GbEzfV-61nyGpijvjZgCcghvLsB0_nL8Nm8HzCA@mail.gmail.com
Some code is moved from partition.c, which has grown very quickly lately;
splitting the executor parts out might help to keep it from getting
totally out of control. Other code is moved from execMain.c. All is
moved to a new file execPartition.c. get_partition_for_tuple now has
a new interface that more clearly separates executor concerns from
generic concerns.
Amit Langote. A slight comment tweak by me.
Discussion: http://postgr.es/m/1f0985f8-3b61-8bc4-4350-baa6d804cb6d@lab.ntt.co.jp
Up until now, we only tracked the number of parameters, which was
sufficient to allocate an array of Datums of the appropriate size,
but not sufficient to, for example, know how to serialize a Datum
stored in one of those slots. An upcoming patch wants to do that,
so add this tracking to make it possible.
Patch by me, reviewed by Tom Lane and Amit Kapila.
Discussion: http://postgr.es/m/CA+TgmoYqpxDKn8koHdW8BEKk8FMUL0=e8m2Qe=M+r0UBjr3tuQ@mail.gmail.com
The lower case spellings are C and C++ standard and are used in most
parts of the PostgreSQL sources. The upper case spellings are only used
in some files/modules. So standardize on the standard spellings.
The APIs for ICU, Perl, and Windows define their own TRUE and FALSE, so
those are left as is when using those APIs.
In code comments, we use the lower-case spelling for the C concepts and
keep the upper-case spelling for the SQL concepts.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
It turns out we misdiagnosed what the real problem was. Revert the
previous changes, because they may have worse consequences going
forward. A better fix is forthcoming.
The simplistic test case is kept, though disabled.
Discussion: https://postgr.es/m/20171102112019.33wb7g5wp4zpjelu@alap3.anarazel.de
If we try to run a parallel plan in serial mode because, for example,
it's going to be scanned via a cursor, but for some reason we're
already in parallel mode (for example because an outer query is
running in parallel), we'd incorrectly try to launch workers.
Fix by adding a flag to the EState, so that we can be certain that
ExecutePlan() and ExecGather()/ExecGatherMerge() will have the same
idea about whether we are executing serially or in parallel.
Report and fix by Amit Kapila with help from Kuntal Ghosh. A few
tweaks by me.
Discussion: http://postgr.es/m/CAA4eK1+_BuZrmVCeua5Eqnm4Co9DAXdM5HPAOE2J19ePbR912Q@mail.gmail.com
The previous convention doesn't lend itself to creating ResultRelInfos
lazily, as we already do in ExecGetTriggerResultRel. This patch
doesn't make anything lazier than before, but the pending patch for
UPDATE tuple routing proposes to do so (and there might be other
opportunities as well).
Amit Khandekar with some adjustments by me.
Discussion: http://postgr.es/m/CA+TgmoYPVP9Lyf6vUFA5DwxS4c--x6LOj2y36BsJaYtp62eXPQ@mail.gmail.com
When some tuple versions in an update chain are frozen due to them being
older than freeze_min_age, the xmax/xmin trail can become broken. This
breaks HOT (and probably other things). A subsequent VACUUM can break
things in more serious ways, such as leaving orphan heap-only tuples
whose root HOT redirect items were removed. This can be seen because
index creation (or REINDEX) complain like
ERROR: XX000: failed to find parent tuple for heap-only tuple at (0,7) in table "t"
Because of relfrozenxid contraints, we cannot avoid the freezing of the
early tuples, so we must cope with the results: whenever we see an Xmin
of FrozenTransactionId, consider it a match for whatever the previous
Xmax value was.
This problem seems to have appeared in 9.3 with multixact changes,
though strictly speaking it seems unrelated.
Since 9.4 we have commit 37484ad2a "Change the way we mark tuples as
frozen", so the fix is simple: just compare the raw Xmin (still stored
in the tuple header, since freezing merely set an infomask bit) to the
Xmax. But in 9.3 we rewrite the Xmin value to FrozenTransactionId, so
the original value is lost and we have nothing to compare the Xmax with.
To cope with that case we need to compare the Xmin with FrozenXid,
assume it's a match, and hope for the best. Sadly, since you can
pg_upgrade a 9.3 instance containing half-frozen pages to newer
releases, we need to keep the old check in newer versions too, which
seems a bit brittle; I hope we can somehow get rid of that.
I didn't optimize the new function for performance. The new coding is
probably a bit slower than before, since there is a function call rather
than a straight comparison, but I'd rather have it work correctly than
be fast but wrong.
This is a followup after 20b6552242 fixed a few related problems.
Apparently, in 9.6 and up there are more ways to get into trouble, but
in 9.3 - 9.5 I cannot reproduce a problem anymore with this patch, so
there must be a separate bug.
Reported-by: Peter Geoghegan
Diagnosed-by: Peter Geoghegan, Michael Paquier, Daniel Wood,
Yi Wen Wong, Álvaro
Discussion: https://postgr.es/m/CAH2-Wznm4rCrhFAiwKPWTpEw2bXDtgROZK7jWWGucXeH3D1fmA@mail.gmail.com
Haribabu Kommi, reviewed by Dilip Kumar and Rafia Sabih. Various
cosmetic changes by me to explain why this appears to be safe but
allowing inserts in parallel mode in general wouldn't be. Also, I
removed the REFRESH MATERIALIZED VIEW case from Haribabu's patch,
since I'm not convinced that case is OK, and hacked on the
documentation somewhat.
Discussion: http://postgr.es/m/CAJrrPGdo5bak6qnPWe8Kpi8g_jfQEs-G4SYmG9y+OFaw2-dPvA@mail.gmail.com
The standard says that all changes of the same kind (insert, update, or
delete) caused in one table by a single SQL statement should be reported
in a single transition table; and by that, they mean to include foreign key
enforcement actions cascading from the statement's direct effects. It's
also reasonable to conclude that if the standard had wCTEs, they would say
that effects of wCTEs applying to the same table as each other or the outer
statement should be merged into one transition table. We weren't doing it
like that.
Hence, arrange to merge tuples from multiple update actions into a single
transition table as much as we can. There is a problem, which is that if
the firing of FK enforcement triggers and after-row triggers with
transition tables is interspersed, we might need to report more tuples
after some triggers have already seen the transition table. It seems like
a bad idea for the transition table to be mutable between trigger calls.
There's no good way around this without a major redesign of the FK logic,
so for now, resolve it by opening a new transition table each time this
happens.
Also, ensure that AFTER STATEMENT triggers fire just once per statement,
or once per transition table when we're forced to make more than one.
Previous versions of Postgres have allowed each FK enforcement query
to cause an additional firing of the AFTER STATEMENT triggers for the
referencing table, but that's certainly not per spec. (We're still
doing multiple firings of BEFORE STATEMENT triggers, though; is that
something worth changing?)
Also, forbid using transition tables with column-specific UPDATE triggers.
The spec requires such transition tables to show only the tuples for which
the UPDATE trigger would have fired, which means maintaining multiple
transition tables or else somehow filtering the contents at readout.
Maybe someday we'll bother to support that option, but it looks like a
lot of trouble for a marginal feature.
The transition tables are now managed by the AfterTriggers data structures,
rather than being directly the responsibility of ModifyTable nodes. This
removes a subtransaction-lifespan memory leak introduced by my previous
band-aid patch 3c4359521.
In passing, refactor the AfterTriggers data structures to reduce the
management overhead for them, by using arrays of structs rather than
several parallel arrays for per-query-level and per-subtransaction state.
I failed to resist the temptation to do some copy-editing on the SGML
docs about triggers, above and beyond merely documenting the effects
of this patch.
Back-patch to v10, because we don't want the semantics of transition
tables to change post-release.
Patch by me, with help and review from Thomas Munro.
Discussion: https://postgr.es/m/20170909064853.25630.12825@wrigleys.postgresql.org
It is equivalent in ANSI C to write (*funcptr) () and funcptr(). These
two styles have been applied inconsistently. After discussion, we'll
use the more verbose style for plain function pointer variables, to make
it clear that it's a variable, and the shorter style when the function
pointer is in a struct (s.func() or s->func()), because then it's clear
that it's not a plain function name, and otherwise the excessive
punctuation makes some of those invocations hard to read.
Discussion: https://www.postgresql.org/message-id/f52c16db-14ed-757d-4b48-7ef360b1631d@2ndquadrant.com
This doesn't allow routing tuple to the foreign partitions themselves,
but it permits tuples to be routed to regular partitions despite the
presence of foreign partitions in the same inheritance hierarchy.
Etsuro Fujita, reviewed by Amit Langote and by me.
Discussion: http://postgr.es/m/bc3db4c1-1693-3b8a-559f-33ad2b50b7ad@lab.ntt.co.jp
This is a mechanical change in preparation for a later commit that
will change the layout of TupleDesc. Introducing a macro to abstract
the details of where attributes are stored will allow us to change
that in separate step and revise it in future.
Author: Thomas Munro, editorialized by Andres Freund
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/CAEepm=0ZtQ-SpsgCyzzYpsXS6e=kZWqk3g5Ygn3MDV7A8dabUA@mail.gmail.com
Add a new EState member es_leaf_result_relations, so that the trigger
code knows about ResultRelInfos created by tuple routing. Also make
sure ExplainPrintTriggers knows about partition-related
ResultRelInfos.
Etsuro Fujita, reviewed by Amit Langote
Discussion: http://postgr.es/m/57163e18-8e56-da83-337a-22f2c0008051@lab.ntt.co.jp
Instead, lock them in the caller using find_all_inheritors so that
they get locked in the standard order, minimizing deadlock risks.
Also in RelationGetPartitionDispatchInfo, avoid opening tables which
are not partitioned; there's no need.
Amit Langote, reviewed by Ashutosh Bapat and Amit Khandekar
Discussion: http://postgr.es/m/91b36fa1-c197-b72f-ca6e-56c593bae68c@lab.ntt.co.jp
Before, we always used a dummy value of 1, but that's not right when
the partitioned table being modified is inside of a WITH clause
rather than part of the main query.
Amit Langote, reported and reviewd by Etsuro Fujita, with a comment
change by me.
Discussion: http://postgr.es/m/ee12f648-8907-77b5-afc0-2980bcb0aa37@lab.ntt.co.jp
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Since tuple-routing implicitly checks the partitioning constraints
at least for the levels of the partitioning hierarchy it traverses,
there's normally no need to revalidate the partitioning constraint
after performing tuple routing. However, if there's a BEFORE trigger
on the target partition, it could modify the tuple, causing the
partitioning constraint to be violated. Catch that case.
Also, instead of checking the root table's partition constraint after
tuple-routing, check it beforehand. Otherwise, the rules for when
the partitioning constraint gets checked get too complicated, because
you sometimes have to check part of the constraint but not all of it.
This effectively reverts commit 39162b2030
in favor of a different approach altogether.
Report by me. Initial debugging by Jeevan Ladhe. Patch by Amit
Langote, reviewed by me.
Discussion: http://postgr.es/m/CA+Tgmoa9DTgeVOqopieV8d1QRpddmP65aCdxyjdYDoEO5pS5KA@mail.gmail.com
Even though no actual tuples are ever inserted into a partitioned
table (the actual tuples are in the partitions, not the partitioned
table itself), we still need to have a ResultRelInfo for the
partitioned table, or per-statement triggers won't get fired.
Amit Langote, per a report from Rajkumar Raghuwanshi. Reviewed by me.
Discussion: http://postgr.es/m/CAKcux6%3DwYospCRY2J4XEFuVy0L41S%3Dfic7rmkbsU-GXhhSbmBg%40mail.gmail.com
We decided in f1b4c771ea to pass the
original slot to ExecConstraints(), but that breaks when there are
BEFORE ROW triggers involved. So we need to do reverse-map the tuples
back to the original descriptor instead, as Amit originally proposed.
Amit Langote, reviewed by Ashutosh Bapat. One overlooked comment
fixed by me.
Discussion: http://postgr.es/m/b3a17254-6849-e542-2353-bde4e880b6a4@lab.ntt.co.jp
A QueryEnvironment concept is added, which allows new types of
objects to be passed into queries from parsing on through
execution. At this point, the only thing implemented is a
collection of EphemeralNamedRelation objects -- relations which
can be referenced by name in queries, but do not exist in the
catalogs. The only type of ENR implemented is NamedTuplestore, but
provision is made to add more types fairly easily.
An ENR can carry its own TupleDesc or reference a relation in the
catalogs by relid.
Although these features can be used without SPI, convenience
functions are added to SPI so that ENRs can easily be used by code
run through SPI.
The initial use of all this is going to be transition tables in
AFTER triggers, but that will be added to each PL as a separate
commit.
An incidental effect of this patch is to produce a more informative
error message if an attempt is made to modify the contents of a CTE
from a referencing DML statement. No tests previously covered that
possibility, so one is added.
Kevin Grittner and Thomas Munro
Reviewed by Heikki Linnakangas, David Fetter, and Thomas Munro
with valuable comments and suggestions from many others
This replaces the old, recursive tree-walk based evaluation, with
non-recursive, opcode dispatch based, expression evaluation.
Projection is now implemented as part of expression evaluation.
This both leads to significant performance improvements, and makes
future just-in-time compilation of expressions easier.
The speed gains primarily come from:
- non-recursive implementation reduces stack usage / overhead
- simple sub-expressions are implemented with a single jump, without
function calls
- sharing some state between different sub-expressions
- reduced amount of indirect/hard to predict memory accesses by laying
out operation metadata sequentially; including the avoidance of
nearly all of the previously used linked lists
- more code has been moved to expression initialization, avoiding
constant re-checks at evaluation time
Future just-in-time compilation (JIT) has become easier, as
demonstrated by released patches intended to be merged in a later
release, for primarily two reasons: Firstly, due to a stricter split
between expression initialization and evaluation, less code has to be
handled by the JIT. Secondly, due to the non-recursive nature of the
generated "instructions", less performance-critical code-paths can
easily be shared between interpreted and compiled evaluation.
The new framework allows for significant future optimizations. E.g.:
- basic infrastructure for to later reduce the per executor-startup
overhead of expression evaluation, by caching state in prepared
statements. That'd be helpful in OLTPish scenarios where
initialization overhead is measurable.
- optimizing the generated "code". A number of proposals for potential
work has already been made.
- optimizing the interpreter. Similarly a number of proposals have
been made here too.
The move of logic into the expression initialization step leads to some
backward-incompatible changes:
- Function permission checks are now done during expression
initialization, whereas previously they were done during
execution. In edge cases this can lead to errors being raised that
previously wouldn't have been, e.g. a NULL array being coerced to a
different array type previously didn't perform checks.
- The set of domain constraints to be checked, is now evaluated once
during expression initialization, previously it was re-built
every time a domain check was evaluated. For normal queries this
doesn't change much, but e.g. for plpgsql functions, which caches
ExprStates, the old set could stick around longer. The behavior
around might still change.
Author: Andres Freund, with significant changes by Tom Lane,
changes by Heikki Linnakangas
Reviewed-By: Tom Lane, Heikki Linnakangas
Discussion: https://postgr.es/m/20161206034955.bh33paeralxbtluv@alap3.anarazel.de
Previously, it was unsafe to execute a plan in parallel if
ExecutorRun() might be called with a non-zero row count. However,
it's quite easy to fix things up so that we can support that case,
provided that it is known that we will never call ExecutorRun() a
second time for the same QueryDesc. Add infrastructure to signal
this, and cross-checks to make sure that a caller who claims this is
true doesn't later reneg.
While that pattern never happens with queries received directly from a
client -- there's no way to know whether multiple Execute messages
will be sent unless the first one requests all the rows -- it's pretty
common for queries originating from procedural languages, which often
limit the result to a single tuple or to a user-specified number of
tuples.
This commit doesn't actually enable parallelism in any additional
cases, because currently none of the places that would be able to
benefit from this infrastructure pass CURSOR_OPT_PARALLEL_OK in the
first place, but it makes it much more palatable to pass
CURSOR_OPT_PARALLEL_OK in places where we currently don't, because it
eliminates some cases where we'd end up having to run the parallel
plan serially.
Patch by me, based on some ideas from Rafia Sabih and corrected by
Rafia Sabih based on feedback from Dilip Kumar and myself.
Discussion: http://postgr.es/m/CA+TgmobXEhvHbJtWDuPZM9bVSLiTj-kShxQJ2uM5GPDze9fRYA@mail.gmail.com
Partitioned tables do not contain any data; only their unpartitioned
descendents need to be scanned. However, the partitioned tables still
need to be locked, even though they're not scanned. To make that
work, Append and MergeAppend relations now need to carry a list of
(unscanned) partitioned relations that must be locked, and InitPlan
must lock all partitioned result relations.
Aside from the obvious advantage of avoiding some work at execution
time, this has two other advantages. First, it may improve the
planner's decision-making in some cases since the empty relation
might throw things off. Second, it paves the way to getting rid of
the storage for partitioned tables altogether.
Amit Langote, reviewed by me.
Discussion: http://postgr.es/m/6837c359-45c4-8044-34d1-736756335a15@lab.ntt.co.jp
Currently, the whole row is shown without column names. Instead,
adopt a style similar to _bt_check_unique() in ExecFindPartition()
and show the failing key: (key1, ...) = (val1, ...).
Amit Langote, per a complaint from Simon Riggs. Reviewed by me;
I also adjusted the grammar in one of the comments.
Discussion: http://postgr.es/m/9f9dc7ae-14f0-4a25-5485-964d9bfc19bd@lab.ntt.co.jp
With this change, you can see the query that a parallel worker is
executing in pg_stat_activity, and if the worker crashes you can
see what query it was executing when it crashed.
Rafia Sabih, reviewed by Kuntal Ghosh and Amit Kapila and slightly
revised by me.
In 2ac3ef7a01, we changed things so that
it's possible for a different TupleTableSlot to be used for partitioned
tables at successively lower levels. If we do end up changing the slot
from the original, we must update ecxt_scantuple to point to the new one
for partition key of the tuple to be computed correctly.
Reported by Rajkumar Raghuwanshi. Patch by Amit Langote.
Discussion: http://postgr.es/m/CAKcux6%3Dm1qyqB2k6cjniuMMrYXb75O-MB4qGQMu8zg-iGGLjDw%40mail.gmail.com
We've accumulated quite a bit of stuff with which pgindent is not
quite happy in this code; clean it up to provide a less-annoying base
for future pgindent runs.
In ExecInsert(), do not switch back to the root partitioned table
ResultRelInfo until after we finish ExecProcessReturning(), so that
RETURNING projection is done using the partition's descriptor. For
the projection to work correctly, we must initialize the same for each
leaf partition during ModifyTableState initialization.
Amit Langote
When a tuple is inherited into a partitioning root, no partition
constraints need to be enforced; when it is inserted into a leaf, the
parent's partitioning quals needed to be enforced. The previous
coding got both of those cases right. When a tuple is inserted into
an intermediate level of the partitioning hierarchy (i.e. a table
which is both a partition itself and in turn partitioned), it must
enforce the partitioning qual inherited from its parent. That case
got overlooked; repair.
Amit Langote
RelationGetPartitionQual() and generate_partition_qual() are always
called with recurse = true, so we don't need an argument for that.
Extracted by me from a larger patch by Amit Langote.
After a tuple is routed to a partition, it has been converted from the
root table's row type to the partition's row type. ExecConstraints
needs to report the failure using the original tuple and the parent's
tuple descriptor rather than the ones for the selected partition.
Amit Langote
Commit 2ac3ef7a01 added a TupleTapleSlot
for partition tuple slot to EState (es_partition_tuple_slot) but it's
more logical to have it as part of ModifyTableState
(mt_partition_tuple_slot) and CopyState (partition_tuple_slot).
Discussion: http://postgr.es/m/1bd459d9-4c0c-197a-346e-e5e59e217d97@lab.ntt.co.jp
Amit Langote, per a gripe from me
Commit 4212cb7326 rendered a comment
in execMain.c incorrect. Per complaint from Tom Lane, repair.
Patch from Amit Kapila, per wording suggested by Tom Lane and me.
Table partitioning is like table inheritance and reuses much of the
existing infrastructure, but there are some important differences.
The parent is called a partitioned table and is always empty; it may
not have indexes or non-inherited constraints, since those make no
sense for a relation with no data of its own. The children are called
partitions and contain all of the actual data. Each partition has an
implicit partitioning constraint. Multiple inheritance is not
allowed, and partitioning and inheritance can't be mixed. Partitions
can't have extra columns and may not allow nulls unless the parent
does. Tuples inserted into the parent are automatically routed to the
correct partition, so tuple-routing ON INSERT triggers are not needed.
Tuple routing isn't yet supported for partitions which are foreign
tables, and it doesn't handle updates that cross partition boundaries.
Currently, tables can be range-partitioned or list-partitioned. List
partitioning is limited to a single column, but range partitioning can
involve multiple columns. A partitioning "column" can be an
expression.
Because table partitioning is less general than table inheritance, it
is hoped that it will be easier to reason about properties of
partitions, and therefore that this will serve as a better foundation
for a variety of possible optimizations, including query planner
optimizations. The tuple routing based which this patch does based on
the implicit partitioning constraints is an example of this, but it
seems likely that many other useful optimizations are also possible.
Amit Langote, reviewed and tested by Robert Haas, Ashutosh Bapat,
Amit Kapila, Rajkumar Raghuwanshi, Corey Huinker, Jaime Casanova,
Rushabh Lathia, Erik Rijkers, among others. Minor revisions by me.
Previously, a prepared statement created via a Parse message could get
a parallel plan, but one created with a PREPARE statement could not.
This state of affairs was due to confusion on my (rhaas) part: I
erroneously believed that a CREATE TABLE .. AS EXECUTE statement could
only be performed with a prepared statement by PREPARE, but in fact
one created by a Prepare message works just as well. Therefore, it
makes no sense to allow parallel query in one case but not the other.
To fix, allow parallel query with all prepared statements, but run
the parallel plan serially (i.e. without workers) in the case of
CREATE TABLE .. AS EXECUTE. Also, document this.
Amit Kapila and Tobias Bussman, plus an extra sentence of
documentation by me.
If a Gather node has read as many tuples as it needs (for example, due
to Limit) it may detach the queue connecting it to the worker before
reading all of the worker's tuples. Rather than let the worker
continue to generate and send all of the results, have it stop after
sending the next tuple.
More could be done here to stop the worker even quicker, but this is
about as well as we can hope to do for 9.6.
This is in response to a problem report from Andreas Seltenreich.
Commit 44339b892a should be actually be
sufficient to fix that example even without this change, but it seems
better to do this, too, since we might otherwise waste quite a large
amount of effort in one or more workers.
Discussion: CAA4eK1KOKGqmz9bGu+Z42qhRwMbm4R5rfnqsLCNqFs9j14jzEA@mail.gmail.com
Amit Kapila
postgres_fdw can now sent an UPDATE or DELETE statement directly to
the foreign server in simple cases, rather than sending a SELECT FOR
UPDATE statement and then updating or deleting rows one-by-one.
Etsuro Fujita, reviewed by Rushabh Lathia, Shigeru Hanada, Kyotaro
Horiguchi, Albe Laurenz, Thom Brown, and me.
This patch widens SPI_processed, EState's es_processed field, PortalData's
portalPos field, FuncCallContext's call_cntr and max_calls fields,
ExecutorRun's count argument, PortalRunFetch's result, and the max number
of rows in a SPITupleTable to uint64, and deals with (I hope) all the
ensuing fallout. Some of these values were declared uint32 before, and
others "long".
I also removed PortalData's posOverflow field, since that logic seems
pretty useless given that portalPos is now always 64 bits.
The user-visible results are that command tags for SELECT etc will
correctly report tuple counts larger than 4G, as will plpgsql's GET
GET DIAGNOSTICS ... ROW_COUNT command. Queries processing more tuples
than that are still not exactly the norm, but they're becoming more
common.
Most values associated with FETCH/MOVE distances, such as PortalRun's count
argument and the count argument of most SPI functions that have one, remain
declared as "long". It's not clear whether it would be worth promoting
those to int64; but it would definitely be a large dollop of additional
API churn on top of this, and it would only help 32-bit platforms which
seem relatively less likely to see any benefit.
Andreas Scherbaum, reviewed by Christian Ullrich, additional hacking by me
In the previous coding, before returning from ExecutorRun, we'd shut
down all parallel workers. This was dead wrong if ExecutorRun was
called with a non-zero tuple count; it had the effect of truncating
the query output. To fix, give ExecutePlan control over whether to
enter parallel mode, and have it refuse to do so if the tuple count
is non-zero. Rewrite the Gather logic so that it can cope with being
called outside parallel mode.
Commit 7aea8e4f2d is largely to blame
for this problem, though this patch modifies some subsequently-committed
code which relied on the guarantees it purported to make.
A Gather executor node runs any number of copies of a plan in an equal
number of workers and merges all of the results into a single tuple
stream. It can also run the plan itself, if the workers are
unavailable or haven't started up yet. It is intended to work with
the Partial Seq Scan node which will be added in future commits.
It could also be used to implement parallel query of a different sort
by itself, without help from Partial Seq Scan, if the single_copy mode
is used. In that mode, a worker executes the plan, and the parallel
leader does not, merely collecting the worker's results. So, a Gather
node could be inserted into a plan to split the execution of that plan
across two processes. Nested Gather nodes aren't currently supported,
but we might want to add support for that in the future.
There's nothing in the planner to actually generate Gather nodes yet,
so it's not quite time to break out the champagne. But we're getting
close.
Amit Kapila. Some designs suggestions were provided by me, and I also
reviewed the patch. Single-copy mode, documentation, and other minor
changes also by me.
Commit 924bcf4f16 introduced a framework
for parallel computation in PostgreSQL that makes most but not all
built-in functions safe to execute in parallel mode. In order to have
parallel query, we'll need to be able to determine whether that query
contains functions (either built-in or user-defined) that cannot be
safely executed in parallel mode. This requires those functions to be
labeled, so this patch introduces an infrastructure for that. Some
functions currently labeled as safe may need to be revised depending on
how pending issues related to heavyweight locking under paralllelism
are resolved.
Parallel plans can't be used except for the case where the query will
run to completion. If portal execution were suspended, the parallel
mode restrictions would need to remain in effect during that time, but
that might make other queries fail. Therefore, this patch introduces
a framework that enables consideration of parallel plans only when it
is known that the plan will be run to completion. This probably needs
some refinement; for example, at bind time, we do not know whether a
query run via the extended protocol will be execution to completion or
run with a limited fetch count. Having the client indicate its
intentions at bind time would constitute a wire protocol break. Some
contexts in which parallel mode would be safe are not adjusted by this
patch; the default is not to try parallel plans except from call sites
that have been updated to say that such plans are OK.
This commit doesn't introduce any parallel paths or plans; it just
provides a way to determine whether they could potentially be used.
I'm committing it on the theory that the remaining parallel sequential
scan patches will also get committed to this release, hopefully in the
not-too-distant future.
Robert Haas and Amit Kapila. Reviewed (in earlier versions) by Noah
Misch.
This refactors rewrite/rowsecurity.c to simplify the handling of the
default deny case (reducing the number of places where we check for and
add the default deny policy from three to one) by splitting up the
retrival of the policies from the application of them.
This also allowed us to do away with the policy_id field. A policy_name
field was added for WithCheckOption policies and is used in error
reporting, when available.
Patch by Dean Rasheed, with various mostly cosmetic changes by me.
Back-patch to 9.5 where RLS was introduced to avoid unnecessary
differences, since we're still in alpha, per discussion with Robert.
The pg_stats view is supposed to be restricted to only show rows
about tables the user can read. However, it sometimes can leak
information which could not otherwise be seen when row level security
is enabled. Fix that by not showing pg_stats rows to users that would
be subject to RLS on the table the row is related to. This is done
by creating/using the newly introduced SQL visible function,
row_security_active().
Along the way, clean up three call sites of check_enable_rls(). The second
argument of that function should only be specified as other than
InvalidOid when we are checking as a different user than the current one,
as in when querying through a view. These sites were passing GetUserId()
instead of InvalidOid, which can cause the function to return incorrect
results if the current user has the BYPASSRLS privilege and row_security
has been set to OFF.
Additionally fix a bug causing RI Trigger error messages to unintentionally
leak information when RLS is enabled, and other minor cleanup and
improvements. Also add WITH (security_barrier) to the definition of pg_stats.
Bumped CATVERSION due to new SQL functions and pg_stats view definition.
Back-patch to 9.5 where RLS was introduced. Reported by Yaroslav.
Patch by Joe Conway and Dean Rasheed with review and input by
Michael Paquier and Stephen Frost.
If a postgres_fdw foreign table is a non-locked source relation in an
UPDATE, DELETE, or SELECT FOR UPDATE/SHARE, and the query selects its
ctid column, the wrong value would be returned if an EvalPlanQual
recheck occurred. This happened because the foreign table's result row
was copied via the ROW_MARK_COPY code path, and EvalPlanQualFetchRowMarks
just unconditionally set the reconstructed tuple's t_self to "invalid".
To fix that, we can have EvalPlanQualFetchRowMarks copy the composite
datum's t_ctid field, and be sure to initialize that along with t_self
when postgres_fdw constructs a tuple to return.
If we just did that much then EvalPlanQualFetchRowMarks would start
returning "(0,0)" as ctid for all other ROW_MARK_COPY cases, which perhaps
does not matter much, but then again maybe it might. The cause of that is
that heap_form_tuple, which is the ultimate source of all composite datums,
simply leaves t_ctid as zeroes in newly constructed tuples. That seems
like a bad idea on general principles: a field that's really not been
initialized shouldn't appear to have a valid value. So let's eat the
trivial additional overhead of doing "ItemPointerSetInvalid(&(td->t_ctid))"
in heap_form_tuple.
This closes out our handling of Etsuro Fujita's report that tableoid and
ctid weren't correctly set in postgres_fdw EvalPlanQual cases. Along the
way we did a great deal of work to improve FDWs' ability to control row
locking behavior; which was not wasted effort by any means, but it didn't
end up being a fix for this problem because that feature would be too
expensive for postgres_fdw to use all the time.
Although the fix for the tableoid misbehavior was back-patched, I'm
hesitant to do so here; it seems far less likely that people would care
about remote ctid than tableoid, and even such a minor behavioral change
as this in heap_form_tuple is perhaps best not back-patched. So commit
to HEAD only, at least for the moment.
Etsuro Fujita, with some adjustments by me
Previously, FDWs could only do "early row locking", that is lock a row as
soon as it's fetched, even though local restriction/join conditions might
discard the row later. This patch adds callbacks that allow FDWs to do
late locking in the same way that it's done for regular tables.
To make use of this feature, an FDW must support the "ctid" column as a
unique row identifier. Currently, since ctid has to be of type TID,
the feature is of limited use, though in principle it could be used by
postgres_fdw. We may eventually allow FDWs to specify another data type
for ctid, which would make it possible for more FDWs to use this feature.
This commit does not modify postgres_fdw to use late locking. We've
tested some prototype code for that, but it's not in committable shape,
and besides it's quite unclear whether it actually makes sense to do late
locking against a remote server. The extra round trips required are likely
to outweigh any benefit from improved concurrency.
Etsuro Fujita, reviewed by Ashutosh Bapat, and hacked up a lot by me
The newly added ON CONFLICT clause allows to specify an alternative to
raising a unique or exclusion constraint violation error when inserting.
ON CONFLICT refers to constraints that can either be specified using a
inference clause (by specifying the columns of a unique constraint) or
by naming a unique or exclusion constraint. DO NOTHING avoids the
constraint violation, without touching the pre-existing row. DO UPDATE
SET ... [WHERE ...] updates the pre-existing tuple, and has access to
both the tuple proposed for insertion and the existing tuple; the
optional WHERE clause can be used to prevent an update from being
executed. The UPDATE SET and WHERE clauses have access to the tuple
proposed for insertion using the "magic" EXCLUDED alias, and to the
pre-existing tuple using the table name or its alias.
This feature is often referred to as upsert.
This is implemented using a new infrastructure called "speculative
insertion". It is an optimistic variant of regular insertion that first
does a pre-check for existing tuples and then attempts an insert. If a
violating tuple was inserted concurrently, the speculatively inserted
tuple is deleted and a new attempt is made. If the pre-check finds a
matching tuple the alternative DO NOTHING or DO UPDATE action is taken.
If the insertion succeeds without detecting a conflict, the tuple is
deemed inserted.
To handle the possible ambiguity between the excluded alias and a table
named excluded, and for convenience with long relation names, INSERT
INTO now can alias its target table.
Bumps catversion as stored rules change.
Author: Peter Geoghegan, with significant contributions from Heikki
Linnakangas and Andres Freund. Testing infrastructure by Jeff Janes.
Reviewed-By: Heikki Linnakangas, Andres Freund, Robert Haas, Simon Riggs,
Dean Rasheed, Stephen Frost and many others.
Previously, relation range table entries used a single Bitmapset field
representing which columns required either UPDATE or INSERT privileges,
despite the fact that INSERT and UPDATE privileges are separately
cataloged, and may be independently held. As statements so far required
either insert or update privileges but never both, that was
sufficient. The required permission could be inferred from the top level
statement run.
The upcoming INSERT ... ON CONFLICT UPDATE feature needs to
independently check for both privileges in one statement though, so that
is not sufficient anymore.
Bumps catversion as stored rules change.
Author: Peter Geoghegan
Reviewed-By: Andres Freund
This does four basic things. First, it provides convenience routines
to coordinate the startup and shutdown of parallel workers. Second,
it synchronizes various pieces of state (e.g. GUCs, combo CID
mappings, transaction snapshot) from the parallel group leader to the
worker processes. Third, it prohibits various operations that would
result in unsafe changes to that state while parallelism is active.
Finally, it propagates events that would result in an ErrorResponse,
NoticeResponse, or NotifyResponse message being sent to the client
from the parallel workers back to the master, from which they can then
be sent on to the client.
Robert Haas, Amit Kapila, Noah Misch, Rushabh Lathia, Jeevan Chalke.
Suggestions and review from Andres Freund, Heikki Linnakangas, Noah
Misch, Simon Riggs, Euler Taveira, and Jim Nasby.
The RLS capability is built on top of the WITH CHECK OPTION
system which was added for auto-updatable views, however, unlike
WCOs on views (which are mandated by the SQL spec to not fire until
after all other constraints and checks are done), it makes much more
sense for RLS checks to happen earlier than constraint and uniqueness
checks.
This patch reworks the structure which holds the WCOs a bit to be
explicitly either VIEW or RLS checks and the RLS-related checks are
done prior to the constraint and uniqueness checks. This also allows
better error reporting as we are now reporting when a violation is due
to a WITH CHECK OPTION and when it's due to an RLS policy violation,
which was independently noted by Craig Ringer as being confusing.
The documentation is also updated to include a paragraph about when RLS
WITH CHECK handling is performed, as there have been a number of
questions regarding that and the documentation was previously silent on
the matter.
Author: Dean Rasheed, with some kabitzing and comment changes by me.
ExecOpenScanRelation assumed that any relation listed in the ExecRowMark
list has been locked by InitPlan; but this is not true if the rel's
markType is ROW_MARK_COPY, which is possible if it's a foreign table.
In most (possibly all) cases, failure to acquire a lock here isn't really
problematic because the parser, planner, or plancache would have taken the
appropriate lock already. In principle though it might leave us vulnerable
to working with a relation that we hold no lock on, and in any case if the
executor isn't depending on previously-taken locks otherwise then it should
not do so for ROW_MARK_COPY relations.
Noted by Etsuro Fujita. Back-patch to all active versions, since the
inconsistency has been there a long time. (It's almost certainly
irrelevant in 9.0, since that predates foreign tables, but the code's
still wrong on its own terms.)
Foreign tables can now be inheritance children, or parents. Much of the
system was already ready for this, but we had to fix a few things of
course, mostly in the area of planner and executor handling of row locks.
As side effects of this, allow foreign tables to have NOT VALID CHECK
constraints (and hence to accept ALTER ... VALIDATE CONSTRAINT), and to
accept ALTER SET STORAGE and ALTER SET WITH/WITHOUT OIDS. Continuing to
disallow these things would've required bizarre and inconsistent special
cases in inheritance behavior. Since foreign tables don't enforce CHECK
constraints anyway, a NOT VALID one is a complete no-op, but that doesn't
mean we shouldn't allow it. And it's possible that some FDWs might have
use for SET STORAGE or SET WITH OIDS, though doubtless they will be no-ops
for most.
An additional change in support of this is that when a ModifyTable node
has multiple target tables, they will all now be explicitly identified
in EXPLAIN output, for example:
Update on pt1 (cost=0.00..321.05 rows=3541 width=46)
Update on pt1
Foreign Update on ft1
Foreign Update on ft2
Update on child3
-> Seq Scan on pt1 (cost=0.00..0.00 rows=1 width=46)
-> Foreign Scan on ft1 (cost=100.00..148.03 rows=1170 width=46)
-> Foreign Scan on ft2 (cost=100.00..148.03 rows=1170 width=46)
-> Seq Scan on child3 (cost=0.00..25.00 rows=1200 width=46)
This was done mainly to provide an unambiguous place to attach "Remote SQL"
fields, but it is useful for inherited updates even when no foreign tables
are involved.
Shigeru Hanada and Etsuro Fujita, reviewed by Ashutosh Bapat and Kyotaro
Horiguchi, some additional hacking by me
The ROW_MARK_COPY path in EvalPlanQualFetchRowMarks() was just setting
tableoid to InvalidOid, I think on the assumption that the referenced
RTE must be a subquery or other case without a meaningful OID. However,
foreign tables also use this code path, and they do have meaningful
table OIDs; so failure to set the tuple field can lead to user-visible
misbehavior. Fix that by fetching the appropriate OID from the range
table.
There's still an issue about whether CTID can ever have a meaningful
value in this case; at least with postgres_fdw foreign tables, it does.
But that is a different problem that seems to require a significantly
different patch --- it's debatable whether postgres_fdw really wants to
use this code path at all.
Simplified version of a patch by Etsuro Fujita, who also noted the
problem to begin with. The issue can be demonstrated in all versions
having FDWs, so back-patch to 9.1.
If an insertion or update had to wait for another transaction to finish,
because there was another insertion with conflicting key in progress,
we would pass a just-free'd item pointer to XactLockTableWait().
All calls to XactLockTableWait() and MultiXactIdWait() had similar issues.
Some passed a pointer to a buffer in the buffer cache, after already
releasing the lock. The call in EvalPlanQualFetch had already released the
pin too. All but the call in execUtils.c would merely lead to reporting a
bogus ctid, however (or an assertion failure, if enabled).
All the callers that passed HeapTuple->t_data->t_ctid were slightly bogus
anyway: if the tuple was updated (again) in the same transaction, its ctid
field would point to the next tuple in the chain, not the tuple itself.
Backpatch to 9.4, where the 'ctid' argument to XactLockTableWait was added
(in commit f88d4cfc)
While building error messages to return to the user,
BuildIndexValueDescription, ExecBuildSlotValueDescription and
ri_ReportViolation would happily include the entire key or entire row in
the result returned to the user, even if the user didn't have access to
view all of the columns being included.
Instead, include only those columns which the user is providing or which
the user has select rights on. If the user does not have any rights
to view the table or any of the columns involved then no detail is
provided and a NULL value is returned from BuildIndexValueDescription
and ExecBuildSlotValueDescription. Note that, for key cases, the user
must have access to all of the columns for the key to be shown; a
partial key will not be returned.
Further, in master only, do not return any data for cases where row
security is enabled on the relation and row security should be applied
for the user. This required a bit of refactoring and moving of things
around related to RLS- note the addition of utils/misc/rls.c.
Back-patch all the way, as column-level privileges are now in all
supported versions.
This has been assigned CVE-2014-8161, but since the issue and the patch
have already been publicized on pgsql-hackers, there's no point in trying
to hide this commit.
Up to now, the "child" executor state trees generated for EvalPlanQual
rechecks have simply shared the ResultRelInfo arrays used for the original
execution tree. However, this leads to dangling-pointer problems, because
ExecInitModifyTable() is all too willing to scribble on some fields of the
ResultRelInfo(s) even when it's being run in one of those child trees.
This trashes those fields from the perspective of the parent tree, because
even if the generated subtree is logically identical to what was in use in
the parent, it's in a memory context that will go away when we're done
with the child state tree.
We do however want to share information in the direction from the parent
down to the children; in particular, fields such as es_instrument *must*
be shared or we'll lose the stats arising from execution of the children.
So the simplest fix is to make a copy of the parent's ResultRelInfo array,
but not copy any fields back at end of child execution.
Per report from Manuel Kniep. The added isolation test is based on his
example. In an unpatched memory-clobber-enabled build it will reliably
fail with "ctid is NULL" errors in all branches back to 9.1, as a
consequence of junkfilter->jf_junkAttNo being overwritten with $7f7f.
This test cannot be run as-is before that for lack of WITH syntax; but
I have no doubt that some variant of this problem can arise in older
branches, so apply the code change all the way back.
This patch adds a way of iterating through the members of a bitmapset
nondestructively, unlike the old way with bms_first_member(). While
bms_next_member() is very slightly slower than bms_first_member()
(at least for typical-size bitmapsets), eliminating the need to palloc
and pfree a temporary copy of the target bitmapset is a significant win.
So this method should be preferred in all cases where a temporary copy
would be necessary.
Tom Lane, with suggestions from Dean Rasheed and David Rowley
As pointed out by Robert, we should really have named pg_rowsecurity
pg_policy, as the objects stored in that catalog are policies. This
patch fixes that and updates the column names to start with 'pol' to
match the new catalog name.
The security consideration for COPY with row level security, also
pointed out by Robert, has also been addressed by remembering and
re-checking the OID of the relation initially referenced during COPY
processing, to make sure it hasn't changed under us by the time we
finish planning out the query which has been built.
Robert and Alvaro also commented on missing OCLASS and OBJECT entries
for POLICY (formerly ROWSECURITY or POLICY, depending) in various
places. This patch fixes that too, which also happens to add the
ability to COMMENT on policies.
In passing, attempt to improve the consistency of messages, comments,
and documentation as well. This removes various incarnations of
'row-security', 'row-level security', 'Row-security', etc, in favor
of 'policy', 'row level security' or 'row_security' as appropriate.
Happy Thanksgiving!
This clause changes the behavior of SELECT locking clauses in the
presence of locked rows: instead of causing a process to block waiting
for the locks held by other processes (or raise an error, with NOWAIT),
SKIP LOCKED makes the new reader skip over such rows. While this is not
appropriate behavior for general purposes, there are some cases in which
it is useful, such as queue-like tables.
Catalog version bumped because this patch changes the representation of
stored rules.
Reviewed by Craig Ringer (based on a previous attempt at an
implementation by Simon Riggs, who also provided input on the syntax
used in the current patch), David Rowley, and Álvaro Herrera.
Author: Thomas Munro
Building on the updatable security-barrier views work, add the
ability to define policies on tables to limit the set of rows
which are returned from a query and which are allowed to be added
to a table. Expressions defined by the policy for filtering are
added to the security barrier quals of the query, while expressions
defined to check records being added to a table are added to the
with-check options of the query.
New top-level commands are CREATE/ALTER/DROP POLICY and are
controlled by the table owner. Row Security is able to be enabled
and disabled by the owner on a per-table basis using
ALTER TABLE .. ENABLE/DISABLE ROW SECURITY.
Per discussion, ROW SECURITY is disabled on tables by default and
must be enabled for policies on the table to be used. If no
policies exist on a table with ROW SECURITY enabled, a default-deny
policy is used and no records will be visible.
By default, row security is applied at all times except for the
table owner and the superuser. A new GUC, row_security, is added
which can be set to ON, OFF, or FORCE. When set to FORCE, row
security will be applied even for the table owner and superusers.
When set to OFF, row security will be disabled when allowed and an
error will be thrown if the user does not have rights to bypass row
security.
Per discussion, pg_dump sets row_security = OFF by default to ensure
that exports and backups will have all data in the table or will
error if there are insufficient privileges to bypass row security.
A new option has been added to pg_dump, --enable-row-security, to
ask pg_dump to export with row security enabled.
A new role capability, BYPASSRLS, which can only be set by the
superuser, is added to allow other users to be able to bypass row
security using row_security = OFF.
Many thanks to the various individuals who have helped with the
design, particularly Robert Haas for his feedback.
Authors include Craig Ringer, KaiGai Kohei, Adam Brightwell, Dean
Rasheed, with additional changes and rework by me.
Reviewers have included all of the above, Greg Smith,
Jeff McCormick, and Robert Haas.
If SELECT FOR UPDATE NOWAIT tries to lock a tuple that is concurrently
being updated, it might fail to honor its NOWAIT specification and block
instead of raising an error.
Fix by adding a no-wait flag to EvalPlanQualFetch which it can pass down
to heap_lock_tuple; also use it in EvalPlanQualFetch itself to avoid
blocking while waiting for a concurrent transaction.
Authors: Craig Ringer and Thomas Munro, tweaked by Álvaro
http://www.postgresql.org/message-id/51FB6703.9090801@2ndquadrant.com
Per Thomas Munro in the course of his SKIP LOCKED feature submission,
who also provided one of the isolation test specs.
Backpatch to 9.4, because that's as far back as it applies without
conflicts (although the bug goes all the way back). To that branch also
backpatch Thomas Munro's new NOWAIT test cases, committed in master by
Heikki as commit 9ee16b49f0 .
With this in place, a session blocking behind another one because of
tuple locks will get a context line mentioning the relation name, tuple
TID, and operation being done on tuple. For example:
LOG: process 11367 still waiting for ShareLock on transaction 717 after 1000.108 ms
DETAIL: Process holding the lock: 11366. Wait queue: 11367.
CONTEXT: while updating tuple (0,2) in relation "foo"
STATEMENT: UPDATE foo SET value = 3;
Most usefully, the new line is displayed by log entries due to
log_lock_waits, although of course it will be printed by any other log
message as well.
Author: Christian Kruse, some tweaks by Álvaro Herrera
Reviewed-by: Amit Kapila, Andres Freund, Tom Lane, Robert Haas
We should allow this so that matviews can be referenced in UPDATE/DELETE
statements in READ COMMITTED isolation level. The requirement for that
is that a re-fetch by TID will see the same row version the query saw
earlier, which is true of matviews, so there's no reason for the
restriction. Per bug #9398.
Michael Paquier, after a suggestion by me
ExecBuildSlotValueDescription() printed "null" for each dropped column in
a row being complained of by ExecConstraints(). This has some sanity in
terms of the underlying implementation, but is of course pretty surprising
to users. To fix, we must pass the target relation's descriptor to
ExecBuildSlotValueDescription(), because the slot descriptor it had been
using doesn't get labeled with attisdropped markers.
Per bug #8408 from Maxim Boguk. Back-patch to 9.2 where the feature of
printing row values in NOT NULL and CHECK constraint violation messages
was introduced.
Michael Paquier and Tom Lane
A subquery reference to a matview should be allowed by CREATE
MATERIALIZED VIEW WITH NO DATA, just like a direct reference is.
Per bug report from Laurent Sartran.
Backpatch to 9.3.
For simple views which are automatically updatable, this patch allows
the user to specify what level of checking should be done on records
being inserted or updated. For 'LOCAL CHECK', new tuples are validated
against the conditionals of the view they are being inserted into, while
for 'CASCADED CHECK' the new tuples are validated against the
conditionals for all views involved (from the top down).
This option is part of the SQL specification.
Dean Rasheed, reviewed by Pavel Stehule
This allows reads to continue without any blocking while a REFRESH
runs. The new data appears atomically as part of transaction
commit.
Review questioned the Assert that a matview was not a system
relation. This will be addressed separately.
Reviewed by Hitoshi Harada, Robert Haas, Andres Freund.
Merged after review with security patch f3ab5d4.
Extend the FDW API (which we already changed for 9.3) so that an FDW can
report whether specific foreign tables are insertable/updatable/deletable.
The default assumption continues to be that they're updatable if the
relevant executor callback function is supplied by the FDW, but finer
granularity is now possible. As a test case, add an "updatable" option to
contrib/postgres_fdw.
This patch also fixes the information_schema views, which previously did
not think that foreign tables were ever updatable, and fixes
view_is_auto_updatable() so that a view on a foreign table can be
auto-updatable.
initdb forced due to changes in information_schema views and the functions
they rely on. This is a bit unfortunate to do post-beta1, but if we don't
change this now then we'll have another API break for FDWs when we do
change it.
Dean Rasheed, somewhat editorialized on by Tom Lane
Move checking for unscannable matviews into ExecOpenScanRelation, which is
a better place for it first because the open relation is already available
(saving a relcache lookup cycle), and second because this eliminates the
problem of telling the difference between rangetable entries that will or
will not be scanned by the query. In particular we can get rid of the
not-terribly-well-thought-out-or-implemented isResultRel field that the
initial matviews patch added to RangeTblEntry.
Also get rid of entirely unnecessary scannability check in the rewriter,
and a bogus decision about whether RefreshMatViewStmt requires a parse-time
snapshot.
catversion bump due to removal of a RangeTblEntry field, which changes
stored rules.
In most cases, these were just references to the SQL standard in
general. In a few cases, a contrast was made between SQL92 and later
standards -- those have been kept unchanged.
The intent was that being populated would, long term, be just one
of the conditions which could affect whether a matview was
scannable; being populated should be necessary but not always
sufficient to scan the relation. Since only CREATE and REFRESH
currently determine the scannability, names and comments
accidentally conflated these concepts, leading to confusion.
Also add missing locking for the SQL function which allows a
test for scannability, and fix a modularity violatiion.
Per complaints from Tom Lane, although its not clear that these
will satisfy his concerns. Hopefully this will at least better
frame the discussion.
This patch adds the core-system infrastructure needed to support updates
on foreign tables, and extends contrib/postgres_fdw to allow updates
against remote Postgres servers. There's still a great deal of room for
improvement in optimization of remote updates, but at least there's basic
functionality there now.
KaiGai Kohei, reviewed by Alexander Korotkov and Laurenz Albe, and rather
heavily revised by Tom Lane.
A materialized view has a rule just like a view and a heap and
other physical properties like a table. The rule is only used to
populate the table, references in queries refer to the
materialized data.
This is a minimal implementation, but should still be useful in
many cases. Currently data is only populated "on demand" by the
CREATE MATERIALIZED VIEW and REFRESH MATERIALIZED VIEW statements.
It is expected that future releases will add incremental updates
with various timings, and that a more refined concept of defining
what is "fresh" data will be developed. At some point it may even
be possible to have queries use a materialized in place of
references to underlying tables, but that requires the other
above-mentioned features to be working first.
Much of the documentation work by Robert Haas.
Review by Noah Misch, Thom Brown, Robert Haas, Marko Tiikkaja
Security review by KaiGai Kohei, with a decision on how best to
implement sepgsql still pending.
This patch addresses the problem that applications currently have to
extract object names from possibly-localized textual error messages,
if they want to know for example which index caused a UNIQUE_VIOLATION
failure. It adds new error message fields to the wire protocol, which
can carry the name of a table, table column, data type, or constraint
associated with the error. (Since the protocol spec has always instructed
clients to ignore unrecognized field types, this should not create any
compatibility problem.)
Support for providing these new fields has been added to just a limited set
of error reports (mainly, those in the "integrity constraint violation"
SQLSTATE class), but we will doubtless add them to more calls in future.
Pavel Stehule, reviewed and extensively revised by Peter Geoghegan, with
additional hacking by Tom Lane.
Since 9.0, the count parameter has only limited the number of tuples
actually returned by the executor. It doesn't affect the behavior of
INSERT/UPDATE/DELETE unless RETURNING is specified, because without
RETURNING, the ModifyTable plan node doesn't return control to execMain.c
for each tuple. And we only check the limit at the top level.
While this behavioral change was unintentional at the time, discussion of
bug #6572 led us to the conclusion that we prefer the new behavior anyway,
and so we should just adjust the docs to match rather than change the code.
Accordingly, do that. Back-patch as far as 9.0 so that the docs match the
code in each branch.
This patch introduces two additional lock modes for tuples: "SELECT FOR
KEY SHARE" and "SELECT FOR NO KEY UPDATE". These don't block each
other, in contrast with already existing "SELECT FOR SHARE" and "SELECT
FOR UPDATE". UPDATE commands that do not modify the values stored in
the columns that are part of the key of the tuple now grab a SELECT FOR
NO KEY UPDATE lock on the tuple, allowing them to proceed concurrently
with tuple locks of the FOR KEY SHARE variety.
Foreign key triggers now use FOR KEY SHARE instead of FOR SHARE; this
means the concurrency improvement applies to them, which is the whole
point of this patch.
The added tuple lock semantics require some rejiggering of the multixact
module, so that the locking level that each transaction is holding can
be stored alongside its Xid. Also, multixacts now need to persist
across server restarts and crashes, because they can now represent not
only tuple locks, but also tuple updates. This means we need more
careful tracking of lifetime of pg_multixact SLRU files; since they now
persist longer, we require more infrastructure to figure out when they
can be removed. pg_upgrade also needs to be careful to copy
pg_multixact files over from the old server to the new, or at least part
of multixact.c state, depending on the versions of the old and new
servers.
Tuple time qualification rules (HeapTupleSatisfies routines) need to be
careful not to consider tuples with the "is multi" infomask bit set as
being only locked; they might need to look up MultiXact values (i.e.
possibly do pg_multixact I/O) to find out the Xid that updated a tuple,
whereas they previously were assured to only use information readily
available from the tuple header. This is considered acceptable, because
the extra I/O would involve cases that would previously cause some
commands to block waiting for concurrent transactions to finish.
Another important change is the fact that locking tuples that have
previously been updated causes the future versions to be marked as
locked, too; this is essential for correctness of foreign key checks.
This causes additional WAL-logging, also (there was previously a single
WAL record for a locked tuple; now there are as many as updated copies
of the tuple there exist.)
With all this in place, contention related to tuples being checked by
foreign key rules should be much reduced.
As a bonus, the old behavior that a subtransaction grabbing a stronger
tuple lock than the parent (sub)transaction held on a given tuple and
later aborting caused the weaker lock to be lost, has been fixed.
Many new spec files were added for isolation tester framework, to ensure
overall behavior is sane. There's probably room for several more tests.
There were several reviewers of this patch; in particular, Noah Misch
and Andres Freund spent considerable time in it. Original idea for the
patch came from Simon Riggs, after a problem report by Joel Jacobson.
Most code is from me, with contributions from Marti Raudsepp, Alexander
Shulgin, Noah Misch and Andres Freund.
This patch was discussed in several pgsql-hackers threads; the most
important start at the following message-ids:
AANLkTimo9XVcEzfiBR-ut3KVNDkjm2Vxh+t8kAmWjPuv@mail.gmail.com1290721684-sup-3951@alvh.no-ip.org1294953201-sup-2099@alvh.no-ip.org1320343602-sup-2290@alvh.no-ip.org1339690386-sup-8927@alvh.no-ip.org4FE5FF020200002500048A3D@gw.wicourts.gov4FEAB90A0200002500048B7D@gw.wicourts.gov
