The partition pruning logic assumed that "b IS NOT true" was exactly the
same as "b IS FALSE". This is not the case when considering NULL values.
Fix this so we correctly include any partition which could hold NULL
values for the NOT case.
Additionally, this fixes a bug in the partition pruning code which handles
partitioned tables partitioned like ((NOT boolcol)). This is a seemingly
unlikely schema design, and it was untested and also broken.
Here we add tests for the ((NOT boolcol)) case and insert some actual data
into those tables and verify we do get the correct rows back when running
queries. I've also adjusted the existing boolpart tests to include some
data and verify we get the correct results too.
Both the bugs being fixed here could lead to incorrect query results with
fewer rows being returned than expected. No additional rows could have
been returned accidentally.
In passing, remove needless ternary expression. It's more simple just to
pass !is_not_clause to makeBoolConst(). It makes sense to do this so the
code is consistent with the bug fix in the "else if" condition just below.
David Kimura did submit a patch to fix the first of the issues here, but
that's not what's being committed here.
Reported-by: David Kimura
Reviewed-by: Richard Guo, David Kimura
Discussion: https://postgr.es/m/CAHnPFjQ5qxs6J_p+g8=ww7GQvfn71_JE+Tygj0S7RdRci1uwPw@mail.gmail.com
Backpatch-through: 11, all supported versions
Similar to 8dff2f224, this disables DNS lookups by the Kerberos library
to look up the KDC and the realm while the Kerberos tests are running.
In some environments, these lookups can take a long time and end up
timing out and causing tests to fail. Further, since this isn't really
our domain, we shouldn't be sending out these DNS requests during our
tests.
In our Kerberos test suite, there isn't much need to worry about the
normal canonicalization that Kerberos provides by looking up the reverse
DNS for the IP address connected to, and in some cases it can actively
cause problems (eg: a captive portal wifi where the normally not
resolvable localhost address used ends up being resolved anyway, and
not to the domain we are using for testing, causing the entire
regression test to fail with errors about not being able to get a TGT
for the remote realm for cross-realm trust).
Therefore, disable it by adding rdns = false into the krb5.conf that's
generated for the test.
Reviewed-By: Heikki Linnakangas
Discussion: https://postgr.es/m/Y/QD2zDkDYQA1GQt@tamriel.snowman.net
The tests added by commits 029dea882 et al turn out to produce
different output under -DRANDOMIZE_ALLOCATED_MEMORY. This is
not a bug exactly: that flag causes coerce_type() to invoke
the input function twice when coercing an unknown-type literal
to a specific type. So you get tsqueryin's bleat about an empty
tsquery twice. Revise the test query to avoid that.
Discussion: https://postgr.es/m/20230406213813.uep7plg6lvcywujo@awork3.anarazel.de
tsquery's GETQUERY() macro is only safe to apply to a tsquery
that is known non-empty; otherwise it gives a pointer to garbage.
Before commit 5a617d75d, ts_headline() avoided this pitfall, but
only in a very indirect, nonobvious way. (hlCover could not reach
its TS_execute call, because if the query contains no lexemes
then hlFirstIndex would surely return -1.) After that commit,
it fell into the trap, resulting in weird errors such as
"unrecognized operator" and/or valgrind complaints. In HEAD,
fix this by not calling TS_execute_locations() at all for an
empty query. In the back branches, add a defensive check to
hlCover() --- that's not fixing any live bug, but I judge the
code a bit too fragile as-is.
Also, both mark_hl_fragments() and mark_hl_words() were careless
about the possibility of empty search text: in the cases where
no match has been found, they'd end up telling mark_fragment() to
mark from word indexes 0 to 0 inclusive, even when there is no
word 0. This is harmless since we over-allocated the prs->words
array, but it does annoy valgrind. Fix so that the end index is -1
and thus mark_fragment() will do nothing in such cases.
Bottom line is that this fixes a live bug in HEAD, but in the
back branches it's only getting rid of a valgrind nitpick.
Back-patch anyway.
Per report from Alexander Lakhin.
Discussion: https://postgr.es/m/c27f642d-020b-01ff-ae61-086af287c4fd@gmail.com
In v13 and v14, the ENABLE/DISABLE TRIGGER USER variant malfunctioned
on cloned triggers, failing to find the clones because it thought they
were system triggers. Other variants of ENABLE/DISABLE TRIGGER would
improperly apply a superuserness check. Fix by adjusting the is-it-
a-system-trigger check to match reality in those branches. (As far
as I can find, this is the only place that got it wrong.)
There's no such bug in v15/HEAD, because we revised the catalog
representation of system triggers to be what this code was expecting.
However, add the test case to these branches anyway, because this area
is visibly pretty fragile. Also remove an obsoleted comment.
The recent v15/HEAD commit 6949b921d fixed a nearby bug. I now see
that my commit message for that was inaccurate: the behavior of
recursing to clone triggers is older than v15, but it didn't apply
to the case in v13/v14 because in those branches parent partitioned
tables have no pg_trigger entries for foreign-key triggers. But add
the test case from that commit to v13/v14, just to show what is
happening there.
Per bug #17886 from DzmitryH.
Discussion: https://postgr.es/m/17886-5406d5d828aa4aa3@postgresql.org
Up through v11 it was sensible to use the "oid" system column as
a foreign key column, but since that was removed there's no visible
usefulness in making any of the remaining system columns a foreign
key. Moreover, since the TupleTableSlot rewrites in v12, such cases
actively fail because of implicit assumptions that only user columns
appear in foreign keys. The lack of complaints about that seems
like good evidence that no one is trying to do it. Hence, rather
than trying to repair those assumptions (of which there are at least
two, maybe more), let's just forbid the case up front.
Per this patch, a system column in either the referenced or
referencing side of a foreign key will draw this error; however,
putting one in the referenced side would have failed later anyway,
since we don't allow unique indexes to be made on system columns.
Per bug #17877 from Alexander Lakhin. Back-patch to v12; the
case still appears to work in v11, so we shouldn't break it there.
Discussion: https://postgr.es/m/17877-4bcc658e33df6de1@postgresql.org
MERGE planning could fail with "variable not found in subplan target
list" if the target table is partitioned and all its partitions are
excluded at plan time, or in the case where it has no partitions but
used to have some. This happened because distribute_row_identity_vars
thought it didn't need to make the target table's reltarget list
fully valid; but if we generate a join plan then that is required
because the dummy Result node's tlist will be made from the reltarget.
The same logic appears in distribute_row_identity_vars in v14,
but AFAICS the problem is unreachable in that branch for lack of
MERGE. In other updating statements, the target table is always
inner-joined to any other tables, so if the target is known dummy
then the whole plan reduces to dummy, so no join nodes are created.
So I'll refrain from back-patching this code change to v14 for now.
Per report from Alvaro Herrera.
Discussion: https://postgr.es/m/20230328112248.6as34mlx5sr4kltg@alvherre.pgsql
find_composite_type_dependencies() ignored indexes, which is a poor
decision because an expression index could have a stored column of
a composite (or other container) type even when the underlying table
does not. Teach it to detect such cases and error out. We have to
work a bit harder than for other relations because the pg_depend entry
won't identify the specific index column of concern, but it's not much
new code.
This does not address bug #17872's original complaint that dropping
a column in such a type might lead to violations of the uniqueness
property that a unique index is supposed to ensure. That seems of
much less concern to me because it won't lead to crashes.
Per bug #17872 from Alexander Lakhin. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/17872-d0fbb799dc3fd85d@postgresql.org
We fail to apply updates and deletes when the REPLICA IDENTITY FULL is
used for the table having generated columns. We didn't use to ignore
generated columns while doing tuple comparison among the tuples from
the publisher and subscriber during apply of updates and deletes.
Author: Onder Kalaci
Reviewed-by: Shi yu, Amit Kapila
Backpatch-through: 12
Discussion: https://postgr.es/m/CACawEhVQC9WoofunvXg12aXtbqKnEgWxoRx3+v8q32AWYsdpGg@mail.gmail.com
We fail to apply updates and deletes when the REPLICA IDENTITY FULL is
used for the table having dropped columns. We didn't use to ignore dropped
columns while doing tuple comparison among the tuples from the publisher
and subscriber during apply of updates and deletes.
Author: Onder Kalaci, Shi yu
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CACawEhVQC9WoofunvXg12aXtbqKnEgWxoRx3+v8q32AWYsdpGg@mail.gmail.com
When calculating distance in brin_minmax_multi_distance_inet(), the
netmask was applied incorrectly. This results in (seemingly) incorrect
ordering of values, triggering an assert.
For builds without asserts this is mostly harmless - we may merge other
ranges, possibly resulting in slightly less efficient index. But it's
still correct and the greedy algorithm doesn't guarantee optimality
anyway.
Backpatch to 14, where minmax-multi indexes were introduced.
Reported by Dmitry Dolgov, investigation and fix by me.
Reported-by: Dmitry Dolgov
Backpatch-through: 14
Discussion: https://postgr.es/m/17774-c6f3e36dd4471e67@postgresql.org
Unfortunately it turns out that the logfile-only option added in b9f8d1cbad
is only available in openldap starting in 2.6.
Luckily the option to control the log level (loglevel/-s) have been around for
much longer. As it turns out loglevel/-s only control what goes into syslog,
not what ends up in the file specified with 'logfile' and stderr.
While we currently are specifying 'logfile', nothing ends up in it, as the
option only controls debug messages, and we didn't set a debug level. The
debug level can only be configured on the commandline and also prevents
forking. That'd require larger changes, so this commit doesn't tackle that
issue.
Specify the syslog level when starting slapd using -s, as that allows to
prevent all syslog messages if one uses '0' instead of 'none', while loglevel
doesn't prevent the first message.
Discussion: https://postgr.es/m/20230311233708.3yjdbjkly2q4gq2j@awork3.anarazel.de
Backpatch: 11-
The logic added in 9d9c02ccd to determine when a qual can be used as a
WindowClause run condition failed to correctly check for subqueries in the
qual. This was being done correctly for normal subquery qual pushdowns,
it's just that 9d9c02ccd failed to follow the lead on that.
This also fixes various other cases where transforming the qual into a
WindowClause run condition in the subquery should have been disallowed.
Bug: #17826
Reported-by: Anban Company
Discussion: https://postgr.es/m/17826-7d8750952f19a5f5@postgresql.org
Backpatch-through: 15, where 9d9c02ccd was introduced.
Until now the tests using slapd spammed syslog for every connection /
query. Use logfile-only to prevent syslog activity. Unfortunately that only
takes effect after logging the first message, but that's still much better
than the prior situation.
Discussion: https://postgr.es/m/20230311233708.3yjdbjkly2q4gq2j@awork3.anarazel.de
Backpatch: 11-
preprocess_targetlist thought PHVs couldn't appear here.
It was mistaken, as per report from Önder Kalacı.
Surveying other pull_var_clause calls, I noted no similar errors,
but I did notice that qual_is_pushdown_safe's assertion about
!contain_window_function was pointless, because the following
pull_var_clause call would complain about them anyway. In HEAD
only, remove the redundant Assert and improve the commentary.
Discussion: https://postgr.es/m/CACawEhUuum-gC_2S3sXLTcsk7bUSPSHOD+g1ZpfKaDK-KKPPWA@mail.gmail.com
The band-aid applied in commit f0bedf3e4 turns out to still need
some work: it made sure we didn't set Np->last_relevant too small
(to the left of the decimal point), but it didn't prevent setting
it too large (off the end of the partially-converted string).
This could result in fetching data beyond the end of the allocated
space, which with very bad luck could cause a SIGSEGV, though
I don't see any hazard of interesting memory disclosure.
Per bug #17839 from Thiago Nunes. The bug's pretty ancient,
so back-patch to all supported versions.
Discussion: https://postgr.es/m/17839-aada50db24d7b0da@postgresql.org
The majority of error exit cases in json_lex_string() failed to
set lex->token_terminator, causing problems for the error context
reporting code: it would see token_terminator less than token_start
and do something more or less nuts. In v14 and up the end result
could be as bad as a crash in report_json_context(). Older
versions accidentally avoided that fate; but all versions produce
error context lines that are far less useful than intended,
because they'd stop at the end of the prior token instead of
continuing to where the actually-bad input is.
To fix, invent some macros that make it less notationally painful
to do the right thing. Also add documentation about what the
function is actually required to do; and in >= v14, add an assertion
in report_json_context about token_terminator being sufficiently
far advanced.
Per report from Nikolay Shaplov. Back-patch to all supported
versions.
Discussion: https://postgr.es/m/7332649.x5DLKWyVIX@thinkpad-pgpro
check_agg_arguments_walker() supposed that it needn't descend into
the arguments of a lower-level aggregate function, but this is
just wrong in the presence of multiple levels of sub-select. The
oversight would lead to executor failures on queries that should
be rejected. (Prior to v11, they actually were rejected, thanks
to a "redundant" execution-time check.)
Per bug #17835 from Anban Company. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/17835-4f29f3098b2d0ba4@postgresql.org
This ensures that the row count in the command tag for a MERGE is
correctly computed in the case where UPDATEs or DELETEs are skipped
due to a BEFORE ROW trigger returning NULL (the INSERT case was
already handled correctly by ExecMergeNotMatched() calling
ExecInsert()).
Back-patch to v15, where MERGE was introduced.
Discussion: https://postgr.es/m/CAEZATCU8XEmR0JWKDtyb7iZ%3DqCffxS9uyJt0iOZ4TV4RT%2Bow1w%40mail.gmail.com
If MERGE attempts an UPDATE or DELETE on a table with BEFORE ROW
triggers, or a cross-partition UPDATE (with or without triggers), and
a concurrent UPDATE or DELETE happens, the merge code would fail.
In some cases this would lead to a crash, while in others it would
cause the wrong merge action to be executed, or no action at all. The
immediate cause of the crash was the trigger code calling
ExecGetUpdateNewTuple() as part of the EPQ mechanism, which fails
because during a merge ri_projectNew is NULL, since merge has its own
per-action projection information, which ExecGetUpdateNewTuple() knows
nothing about.
Fix by arranging for the trigger code to exit early, returning the
TM_Result and TM_FailureData information, if a concurrent modification
is detected, allowing the merge code to do the necessary EPQ handling
in its own way. Similarly, prevent the cross-partition update code
from doing any EPQ processing for a merge, allowing the merge code to
work out what it needs to do.
This leads to a number of simplifications in nodeModifyTable.c. Most
notably, the ModifyTableContext->GetUpdateNewTuple() callback is no
longer needed, and mergeGetUpdateNewTuple() can be deleted, since
there is no longer any requirement for get-update-new-tuple during a
merge. Similarly, ModifyTableContext->cpUpdateRetrySlot is no longer
needed. Thus ExecGetUpdateNewTuple() and the retry_slot handling of
ExecCrossPartitionUpdate() can be restored to how they were in v14,
before the merge code was added, and ExecMergeMatched() no longer
needs any special-case handling for cross-partition updates.
While at it, tidy up ExecUpdateEpilogue() a bit, making it handle
recheckIndexes locally, rather than passing it in as a parameter,
ensuring that it is freed properly. This dates back to when it was
split off from ExecUpdate() to support merge.
Per bug #17809 from Alexander Lakhin, and follow-up investigation of
bug #17792, also from Alexander Lakhin.
Back-patch to v15, where MERGE was introduced, taking care to preserve
backwards-compatibility of the trigger API in v15 for any extensions
that might use it.
Discussion:
https://postgr.es/m/17809-9e6650bef133f0fe%40postgresql.orghttps://postgr.es/m/17792-0f89452029662c36%40postgresql.org
This was an omission in the original creation of the module.
Also slightly adjust some wording to avoid a double "is".
Backpatch the non-meson piece of this to release 12, where the module
was introduced.
Discussion: https://postgr.es/m/be869e1c-8e3f-4cde-8609-212c899cccf9@dunslane.net
The COPY documentation is quite clear that "COPY relation TO" copies
rows from only the named table, not any inheritance children it may
have. However, if you enabled row-level security on the table then
this stopped being true, because the code forgot to apply the ONLY
modifier in the "SELECT ... FROM relation" query that it constructs
in order to allow RLS predicates to be attached. Fix that.
Report and patch by Antonin Houska (comment adjustments and test case
by me). Back-patch to all supported branches.
Discussion: https://postgr.es/m/3472.1675251957@antos
If a view is defined atop another view, and then CREATE OR REPLACE
VIEW is used to add columns to the lower view, then when the upper
view's referencing RTE is expanded by ApplyRetrieveRule we will have
a subquery RTE with fewer eref->colnames than output columns. This
confuses various code that assumes those lists are always in sync,
as they are in plain parser output.
We have seen such problems before (cf commit d5b760ecb), and now
I think the time has come to do what was speculated about in that
commit: let's make ApplyRetrieveRule synthesize some column names to
preserve the invariant that holds in parser output. Otherwise we'll
be chasing this class of bugs indefinitely. Moreover, it appears from
testing that this actually gives us better results in the test case
d5b760ecb added, and likely in other corner cases that we lack
coverage for.
In HEAD, I replaced d5b760ecb's hack to make expandRTE exit early with
an elog(ERROR) call, since the case is now presumably unreachable.
But it seems like changing that in back branches would bring more risk
than benefit, so there I just updated the comment.
Per bug #17811 from Alexander Lakhin. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/17811-d31686b78f0dffc9@postgresql.org
If UPDATE is forced to retry after an EvalPlanQual check, it neglected
to repeat GENERATED-column computations, even though those might well
have changed since we're dealing with a different tuple than before.
Fixing this is mostly a matter of looping back a bit further when
we retry. In v15 and HEAD that's most easily done by altering the API
of ExecUpdateAct so that it includes computing GENERATED expressions.
Also, if an UPDATE in a partitioned table turns into a cross-partition
INSERT operation, we failed to recompute GENERATED columns. That's a
bug since 8bf6ec3ba allowed partitions to have different generation
expressions; although it seems to have no ill effects before that.
Fixing this is messier because we can now have situations where the same
query needs both the UPDATE-aligned set of GENERATED columns and the
INSERT-aligned set, and it's unclear which set will be generated first
(else we could hack things by forcing the INSERT-aligned set to be
generated, which is indeed how fe9e658f4 made it work for MERGE).
The best fix seems to be to build and store separate sets of expressions
for the INSERT and UPDATE cases. That would create ABI issues in the
back branches, but so far it seems we can leave this alone in the back
branches.
Per bug #17823 from Hisahiro Kauchi. The first part of this affects all
branches back to v12 where GENERATED columns were added.
Discussion: https://postgr.es/m/17823-b64909cf7d63de84@postgresql.org
1. Make sure that we don't decrement SxactGlobalXminCount twice when
the SXACT_FLAG_RO_SAFE optimization is reached in a parallel query.
This could trigger a sanity check failure in assert builds. Non-assert
builds recompute the count in SetNewSxactGlobalXmin(), so the problem
was hidden, explaining the lack of field reports. Add a new isolation
test to exercise that case.
2. Remove an assertion that the DOOMED flag can't be set on a partially
released SERIALIZABLEXACT. Instead, ignore the flag (our transaction
was already determined to be read-only safe, and DOOMED is in fact set
during partial release, and there was already an assertion that it
wasn't set sooner). Improve an existing isolation test so that it
reaches that case (previously it wasn't quite testing what it was
supposed to be testing; see discussion).
Back-patch to 12. Bug #17116. Defects in commit 47a338cf.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/17116-d6ca217acc180e30%40postgresql.org
Beginning in v15, if you apply ALTER TABLE ENABLE/DISABLE TRIGGER to
a partitioned table, it also affects the partitions' cloned versions
of the affected trigger(s). The initial implementation of this
located the clones by name, but that fails on foreign-key triggers
which have names incorporating their own OIDs. We can fix that, and
also make the behavior more bulletproof in the face of user-initiated
trigger renames, by identifying the cloned triggers by tgparentid.
Following the lead of earlier commits in this area, I took care not
to break ABI in the v15 branch, even though I rather doubt there
are any external callers of EnableDisableTrigger.
While here, update the documentation, which was not touched when
the semantics were changed.
Per bug #17817 from Alan Hodgson. Back-patch to v15; older versions
do not have this behavior.
Discussion: https://postgr.es/m/17817-31dfb7c2100d9f3d@postgresql.org
This is usually harmless, but if you were very unlucky it could
provoke a segfault due to the "to" string being right up against
the end of memory. Found via valgrind testing (so we might've
found it earlier, except that our regression tests lacked any
exercise of translate()'s deletion feature).
Fix by switching the order of the test-for-end-of-string and
advance-pointer steps. While here, compute "to_ptr + tolen"
just once. (Smarter compilers might figure that out for
themselves, but let's just make sure.)
Report and fix by Daniil Anisimov, in bug #17816.
Discussion: https://postgr.es/m/17816-70f3d2764e88a108@postgresql.org
We already tried to fix this in commits 3f7323cbb et al (and follow-on
fixes), but now it emerges that there are still unfixed cases;
moreover, these cases affect all branches not only pre-v14. I thought
we had eliminated all cases of making multiple clones of an UPDATE's
target list when we nuked inheritance_planner. But it turns out we
still do that in some partitioned-UPDATE cases, notably including
INSERT ... ON CONFLICT UPDATE, because ExecInitPartitionInfo thinks
it's okay to clone and modify the parent's targetlist.
This fix is based on a suggestion from Andres Freund: let's stop
abusing the ParamExecData.execPlan mechanism, which was only ever
meant to handle initplans, and instead solve the execution timing
problem by having the expression compiler move MULTIEXPR_SUBLINK steps
to the front of their expression step lists. This is feasible because
(a) all branches still in support compile the entire targetlist of
an UPDATE into a single ExprState, and (b) we know that all
MULTIEXPR_SUBLINKs do need to be evaluated --- none could be buried
inside a CASE, for example. There is a minor semantics change
concerning the order of execution of the MULTIEXPR's subquery versus
other parts of the parent targetlist, but that seems like something
we can get away with. By doing that, we no longer need to worry
about whether different clones of a MULTIEXPR_SUBLINK share output
Params; their usage of that data structure won't overlap.
Per bug #17800 from Alexander Lakhin. Back-patch to all supported
branches. In v13 and earlier, we can revert 3f7323cbb and follow-on
fixes; however, I chose to keep the SubPlan.subLinkId field added
in ccbb54c72. We don't need that anymore in the core code, but it's
cheap enough to fill, and removing a plan node field in a minor
release seems like it'd be asking for trouble.
Andres Freund and Tom Lane
Discussion: https://postgr.es/m/17800-ff90866b3906c964@postgresql.org
If a rule action contains a subquery that refers to columns from OLD
or NEW, then those are really lateral references, and the planner will
complain if it sees such things in a subquery that isn't marked as
lateral. However, at rule-definition time, the user isn't required to
mark the subquery with LATERAL, and so it can fail when the rule is
used.
Fix this by marking such subqueries as lateral in the rewriter, at the
point where they're used.
Dean Rasheed and Tom Lane, per report from Alexander Lakhin.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/5e09da43-aaba-7ea7-0a51-a2eb981b058b%40gmail.com
Given an updatable view with a DO ALSO INSERT ... SELECT rule, a
multi-row INSERT ... VALUES query on the view fails if the VALUES list
contains any DEFAULTs that are not replaced by view defaults. This
manifests as an "unrecognized node type" error, or an Assert failure,
in an assert-enabled build.
The reason is that when RewriteQuery() attempts to replace the
remaining DEFAULT items with NULLs in any product queries, using
rewriteValuesRTEToNulls(), it assumes that the VALUES RTE is located
at the same rangetable index in each product query. However, if the
product query is an INSERT ... SELECT, then the VALUES RTE is actually
in the SELECT part of that query (at the same index), rather than the
top-level product query itself.
Fix, by descending to the SELECT in such cases. Note that we can't
simply use getInsertSelectQuery() for this, since that expects to be
given a raw rule action with OLD and NEW placeholder entries, so we
duplicate its logic instead.
While at it, beef up the checks in getInsertSelectQuery() by checking
that the jointree->fromlist node is indeed a RangeTblRef, and that the
RTE it points to has rtekind == RTE_SUBQUERY.
Per bug #17803, from Alexander Lakhin. Back-patch to all supported
branches.
Dean Rasheed, reviewed by Tom Lane.
Discussion: https://postgr.es/m/17803-53c63ed4ecb4eac6%40postgresql.org
In ExecInitPartitionInfo(), the Assert when building the WITH CHECK
OPTION list for the new partition assumed that the command would be an
INSERT or UPDATE, but it can also be a MERGE. This can be triggered by
a MERGE into a partitioned table with RLS checks to enforce.
Fix, and back-patch to v15, where MERGE was introduced.
Discussion: https://postgr.es/m/CAEZATCWWFtQmW67F3XTyMU5Am10Oxa_b8oe0x%2BNu5Mo%2BCdRErg%40mail.gmail.com
This ensures that the row count in the command tag for a MERGE is
correctly computed. Previously, if MERGE updated a partitioned table,
the row count would be incorrect if any row was moved to a different
partition, since such updates were counted twice.
Back-patch to v15, where MERGE was introduced.
Discussion: https://postgr.es/m/CAEZATCWRMG7XX2QEsVL1LswmNo2d_YG8tKTLkpD3=Lp644S7rg@mail.gmail.com
WAL_LOG does a scan of the template's pg_class to determine the set of
relations that need to be copied from a template database to the new
one. However, as coded in 9c08aea, this copy strategy would load the
pages of pg_class without considering it as a permanent relation,
causing the loaded pages to never be flushed when they should. Any
modification of the template's pg_class, mostly through DDLs, would then
be missed, causing corruptions.
STRATEGY = WAL_LOG is the default over FILE_COPY since it has been
introduced, so any changes done to pg_class on a database template would
be gone. Updates of database templates should be a rare thing, so the
impact of this bug should be hopefully limited. The pre-14 default
strategy FILE_COPY is safe, and can be used as a workaround.
Ryo Matsumura has found and analyzed the issue, and Nathan has written a
test able to reproduce the failure (with few tweaks from me).
Backpatch down to 15, where STRATEGY = WAL_LOG has been introduced.
Author: Nathan Bossart, Ryo Matsumura
Reviewed-by: Dilip Kumar, Michael Paquier
Discussion: https://postgr.es/m/TYCPR01MB6868677E499C9AD5123084B5E8A39@TYCPR01MB6868.jpnprd01.prod.outlook.com
Backpatch-through: 15
Historically we've accepted interval input like 'P.1e10D'. This
is probably an accident of having used strtod() to do the parsing,
rather than something anyone intended, but it's been that way for
a long time. Commit e39f99046 broke this by trying to parse the
integer and fractional parts separately, without accounting for
the possibility of an exponent. In principle that coding allowed
for precise conversions of field values wider than 15 decimal
digits, but that does not seem like a goal worth sweating bullets
for. So, rather than trying to manage an exponent on top of the
existing complexity, let's just revert to the previous coding that
used strtod() by itself. We can still improve on the old code to
the extent of allowing the value to range up to 1.0e15 rather than
only INT_MAX. (Allowing more than that risks creating problems
due to precision loss: the converted fractional part might have
absolute value more than 1. Perhaps that could be dealt with in
some way, but it really does not seem worth additional effort.)
Per bug #17795 from Alexander Lakhin. Back-patch to v15 where
the faulty code came in.
Discussion: https://postgr.es/m/17795-748d6db3ed95d313@postgresql.org
This was not something that required consideration before MERGE
was invented; but MERGE builds a join tree that left-joins to the
result relation, meaning that remove_useless_joins will consider
removing it. That should generally be stopped by the query's use
of output variables from the result relation. However, if the
result relation is inherited (e.g. a partitioned table) then
we don't add any row identity variables to the query until
expand_inherited_rtentry, which happens after join removal.
This was exposed as of commit 3c569049b, which made it possible
to deduce that a partitioned table could contain at most one row
matching a join key, enabling removal of the not-yet-expanded
result relation. Ooops.
To fix, let's just teach join_is_removable that the query result
rel is never removable. It's a cheap enough test in any case,
and it'll save some cycles that we'd otherwise expend in proving
that it's not removable, even in the cases we got right.
Back-patch to v15 where MERGE was added. Although I think the
case cannot be reached in v15, this seems like cheap insurance.
Per investigation of a report from Alexander Lakhin.
Discussion: https://postgr.es/m/36bee393-b351-16ac-93b2-d46d83637e45@gmail.com
ruleutils.c blindly printed the user-given alias (or nothing if there
hadn't been one) for the target table of INSERT/UPDATE/DELETE queries.
That works a large percentage of the time, but not always: for queries
appearing in WITH, it's possible that we chose a different alias to
avoid conflict with outer-scope names. Since the chosen alias would
be used in any Var references to the target table, this'd lead to an
inconsistent printout with consequences such as dump/restore failures.
The correct logic for printing (or not) a relation alias was embedded
in get_from_clause_item. Factor it out to a separate function so that
we don't need a jointree node to use it. (Only a limited part of that
function can be reached from these new call sites, but this seems like
the cleanest non-duplicative factorization.)
In passing, I got rid of a redundant "\d+ rules_src" step in rules.sql.
Initial report from Jonathan Katz; thanks to Vignesh C for analysis.
This has been broken for a long time, so back-patch to all supported
branches.
Discussion: https://postgr.es/m/e947fa21-24b2-f922-375a-d4f763ef3e4b@postgresql.org
Discussion: https://postgr.es/m/CALDaNm1MMntjmT_NJGp-Z=xbF02qHGAyuSHfYHias3TqQbPF2w@mail.gmail.com
OpenSSL 1.1.1 and newer versions have added support for RSA-PSS
certificates, which requires the use of a specific routine in OpenSSL to
determine which hash function to use when compiling it when using
channel binding in SCRAM-SHA-256. X509_get_signature_nid(), that is the
original routine the channel binding code has relied on, is not able to
determine which hash algorithm to use for such certificates. However,
X509_get_signature_info(), new to OpenSSL 1.1.1, is able to do it. This
commit switches the channel binding logic to rely on
X509_get_signature_info() over X509_get_signature_nid(), which would be
the choice when building with 1.1.1 or newer.
The error could have been triggered on the client or the server, hence
libpq and the backend need to have their related code paths patched.
Note that attempting to load an RSA-PSS certificate with OpenSSL 1.1.0
or older leads to a failure due to an unsupported algorithm.
The discovery of relying on X509_get_signature_info() comes from Jacob,
the tests have been written by Heikki (with few tweaks from me), while I
have bundled the whole together while adding the bits needed for MSVC
and meson.
This issue exists since channel binding exists, so backpatch all the way
down. Some tests are added in 15~, triggered if compiling with OpenSSL
1.1.1 or newer, where the certificate and key files can easily be
generated for RSA-PSS.
Reported-by: Gunnar "Nick" Bluth
Author: Jacob Champion, Heikki Linnakangas
Discussion: https://postgr.es/m/17760-b6c61e752ec07060@postgresql.org
Backpatch-through: 11
Commit e39f99046 moved some code up closer to the start of
DecodeInterval(), without noticing that it had been implicitly
relying on previous checks to reject the case of empty input.
Given empty input, we'd now dereference a pointer that hadn't been
set, possibly leading to a core dump. (But if we fail to provoke
a SIGSEGV, nothing bad happens, and the expected syntax error is
thrown a bit later.)
Per bug #17788 from Alexander Lakhin. Back-patch to v15 where
the fault was introduced.
Discussion: https://postgr.es/m/17788-dabac9f98f7eafd5@postgresql.org
No GUCs that use NO_SHOW_ALL are reported in pg_show_all_settings(),
hence trying to check combinations of flags related to it is pointless.
These queries have been introduced by d10e41d, so backpatch down to 15
to keep all the branches consistent. Equivalent checks based on
NO_SHOW_ALL could be added in check_GUC_init() when a GUC is initially
loaded, but this can be done only on HEAD.
Author: Nitin Jadhav
Discussion: https://postgr.es/m/CAMm1aWaYe0muu3ABo7iSAgK+OWDS9yNe8GGRYnCyeEpScYKa+g@mail.gmail.com
Backpatch-through: 15
This test has been added as of 857ee8e that has introduced the SQL
function txid_status(), with the purpose of checking that a transaction
ID still in-progress during a crash is correctly marked as aborted after
recovery finishes.
This test is unstable, and some configuration scenarios may that easier
to reproduce (wal_level=minimal, wal_compression=on) because the WAL
holding the information about the in-progress transaction ID may not
have made it to disk yet, hence a post-crash recovery may cause the same
XID to be reused, triggering a test failure.
We have discussed a few approaches, like making this function force a
WAL flush to make it reliable across crashes, but we don't want to pay a
performance penalty in some scenarios, as well. The test could have
been tweaked to enforce a checkpoint but that actually breaks the
promise of the test to rely on a stable result of txid_status() after
a crash.
This issue has been reported a few times across the past years, with an
original report from Kyotaro Horiguchi. The buildfarm machines tanager,
hachi and gokiburi enable wal_compression, and fail on this test
periodically.
Discussion: https://postgr.es/m/3163112.1674762209@sss.pgh.pa.us
Discussion: https://postgr.es/m/20210305.115011.558061052471425531.horikyota.ntt@gmail.com
Backpatch-through: 11
This fixes a bug that, under some circumstances, would cause MERGE to
fail to properly recompute expressions for GENERATED STORED columns.
Formerly, ExecInitModifyTable() did not call ExecInitStoredGenerated()
for a MERGE command, which meant that the generated expressions
information was not computed until later, when the first merge action
was executed. However, if the first merge action to execute was an
UPDATE, then ExecInitStoredGenerated() could decide to skip some some
generated columns, if the columns on which they depended were not
updated, which was a problem if the MERGE also contained an INSERT
action, for which no generated columns should be skipped.
So fix by having ExecInitModifyTable() call ExecInitStoredGenerated()
for MERGE, and assume that it isn't safe to skip any generated columns
in a MERGE. Possibly that could be relaxed, by allowing some generated
columns to be skipped for a MERGE without an INSERT action, but it's
not clear that it's worth the effort.
Noticed while investigating bug #17759. Back-patch to v15, where MERGE
was added.
Dean Rasheed, reviewed by Tom Lane.
Discussion:
https://postgr.es/m/17759-e76d9bece1b5421c%40postgresql.orghttps://postgr.es/m/CAEZATCXb_ezoMCcL0tzKwRGA1x0oeE%3DawTaysRfTPq%2B3wNJn8g%40mail.gmail.com
The drop database command waits for the logical replication sync worker to
accept ProcSignalBarrier and the worker's slot creation waits for the drop
database to finish which leads to a deadlock. This happens because the
tablesync worker holds interrupts while creating a slot.
We prevent cancel/die interrupts while creating a slot in the table sync
worker because it is possible that before the server finishes this
command, a concurrent drop subscription happens which would complete
without removing this slot and that leads to the slot existing until the
end of walsender. However, the slot will eventually get dropped at the
walsender exit time, so there is no danger of the dangling slot.
This patch reallows cancel/die interrupts while creating a slot and
modifies the test to wait for slots to become zero to prevent finding an
ephemeral slot.
The reported hang doesn't happen in PG14 as the drop database starts to
wait for ProcSignalBarrier with PG15 (commits 4eb2176318 and e2f65f4255)
but it is good to backpatch this till PG14 as it is not a good idea to
prevent interrupts during a network call that could block indefinitely.
Reported-by: Lakshmi Narayanan Sreethar
Diagnosed-by: Andres Freund
Author: Hou Zhijie
Reviewed-by: Vignesh C, Amit Kapila
Backpatch-through: 14, where it was introduced in commit 6b67d72b60
Discussion: https://postgr.es/m/CA+kvmZELXQ4ZD3U=XCXuG3KvFgkuPoN1QrEj8c-rMRodrLOnsg@mail.gmail.com
When libpqrcv_connect (also known as walrcv_connect()) failed, it leaked the
libpq connection. In most paths that's fairly harmless, as the calling process
will exit soon after. But e.g. CREATE SUBSCRIPTION could lead to a somewhat
longer lived leak.
Fix by releasing resources, including the libpq connection, on error.
Add a test exercising the error code path. To make it reliable and safe, the
test tries to connect to port=-1, which happens to fail during connection
establishment, rather than during connection string parsing.
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/20230121011237.q52apbvlarfv6jm6@awork3.anarazel.de
Backpatch: 11-
b762fed64 recently changed this test to prevent subquery pullup to allow
us to test Memoize with lateral_vars. As pointed out by Tom Lane, OFFSET
0 is our standard way of preventing subquery pullups, so do it that way
instead.
Discussion: https://postgr.es/m/2144818.1674517061@sss.pgh.pa.us
Backpatch-through: 14, same as b762fed64
The test in question was meant to be testing Memoize to ensure it worked
correctly when the inner side of the join contained lateral vars, however,
nothing in the lateral subquery stopped it from being pulled up into the
main query, so the planner did that, and that meant no more lateral vars.
Here we add a simple ORDER BY to stop the planner from being able to
pullup the lateral subquery.
Author: Richard Guo
Discussion: https://postgr.es/m/CAMbWs4_LHJaN4L-tXpKMiPFnsCJWU1P8Xh59o0W7AA6UN99=cQ@mail.gmail.com
Backpatch-through: 14, where Memoize was added.
The motivation for this change is that when pg_dump dumps a
partitioned index that's marked REPLICA IDENTITY, it generates a
command sequence that applies REPLICA IDENTITY before the partitioned
index has been marked valid, causing restore to fail. We could
perhaps change pg_dump to not do it like that, but that would be
difficult and would not fix existing dump files with the problem.
There seems to be very little reason for the backend to disallow
this anyway --- the code ignores indisreplident when the index
isn't valid --- so instead let's fix it by allowing the case.
Commit 9511fb37a previously expressed a concern that allowing
indisreplident to be set on invalid indexes might allow us to
wind up in a situation where a table could have indisreplident
set on multiple indexes. I'm not sure I follow that concern
exactly, but in any case the only way that could happen is because
relation_mark_replica_identity is too trusting about the existing set
of markings being valid. Let's just rip out its early-exit code path
(which sure looks like premature optimization anyway; what are we
doing expending code to make redundant ALTER TABLE ... REPLICA
IDENTITY commands marginally faster and not-redundant ones marginally
slower?) and fix it to positively guarantee that no more than one
index is marked indisreplident.
The pg_dump failure can be demonstrated in all supported branches,
so back-patch all the way. I chose to back-patch 9511fb37a as well,
just to keep indisreplident handling the same in all branches.
Per bug #17756 from Sergey Belyashov.
Discussion: https://postgr.es/m/17756-dd50e8e0c8dd4a40@postgresql.org
test_extensions' test_ext_cine extension has the same upgrade hazard
as test_ext7: the regression test leaves it in an updated state
from which no downgrade path to default is provided. This causes
the update_extensions.sql script helpfully provided by pg_upgrade
to fail. So drop it in cross-version-upgrade testing.
Not entirely sure how come I didn't hit this in testing yesterday;
possibly I'd built the upgrade reference databases with
testmodules-install-check disabled.
Backpatch to v10 where this module was introduced.
To test pg_upgrade across major PG versions, we have to be able to
modify or drop any old objects with no-longer-supported properties,
and we have to be able to deal with cosmetic changes in pg_dump output.
Up to now, the buildfarm and pg_upgrade's own test infrastructure had
separate implementations of the former, and we had nothing but very
ad-hoc rules for the latter (including an arbitrary threshold on how
many lines of unchecked diff were okay!). This patch creates a Perl
module that can be shared by both those use-cases, and adds logic
that deals with pg_dump output diffs in a much more tightly defined
fashion.
This largely supersedes previous efforts in commits 0df9641d3,
9814ff550, and 62be9e4cd, which developed a SQL-script-based solution
for the task of dropping old objects. There was nothing fundamentally
wrong with that work in itself, but it had no basis for solving the
output-formatting problem. The most plausible way to deal with
formatting is to build a Perl module that can perform editing on the
dump files; and once we commit to that, it makes more sense for the
same module to also embed the knowledge of what has to be done for
dropping old objects.
Back-patch versions of the helper module as far as 9.2, to
support buildfarm animals that still test that far back.
It's also necessary to back-patch PostgreSQL/Version.pm,
because the new code depends on that. I fixed up pg_upgrade's
002_pg_upgrade.pl in v15, but did not look into back-patching
it further than that.
Tom Lane and Andrew Dunstan
Discussion: https://postgr.es/m/891521.1673657296@sss.pgh.pa.us
In commit 8bf6ec3ba I assumed that no code path could reach
ExecGetExtraUpdatedCols without having gone through
ExecInitStoredGenerated. That turns out not to be the case in
logical replication: if there's an ON UPDATE trigger on the target
table, trigger.c will call this code before anybody has set up its
generated columns. Having seen that, I don't have a lot of faith in
there not being other such paths. ExecGetExtraUpdatedCols can call
ExecInitStoredGenerated for itself, as long as we are willing to
assume that it is only called in CMD_UPDATE operations, which on
the whole seems like a safer leap of faith.
Per report from Vitaly Davydov.
Discussion: https://postgr.es/m/d259d69652b8c2ff50e14cda3c236c7f@postgrespro.ru
The current jsonpath code assumes that the referenced variable always exists.
It could only throw an error at the value valuation time. At the same time
existence checking assumes variable is present without valuation, and error
suppression doesn't work for missing variables.
This commit makes existense checking trigger an error for missing variables.
This makes the overall behavior consistent.
Backpatch to 12 where jsonpath was introduced.
Reported-by: David G. Johnston
Discussion: https://postgr.es/m/CAKFQuwbeytffJkVnEqDyLZ%3DrQsznoTh1OgDoOF3VmOMkxcTMjA%40mail.gmail.com
Author: Alexander Korotkov, David G. Johnston
Backpatch-through: 12
We were identifying the updatable generated columns of inheritance
children by transposing the calculation made for their parent.
However, there's nothing that says a traditional-inheritance child
can't have generated columns that aren't there in its parent, or that
have different dependencies than are in the parent's expression.
(At present it seems that we don't enforce that for partitioning
either, which is likely wrong to some degree or other; but the case
clearly needs to be handled with traditional inheritance.)
Hence, drop the very-klugy-anyway "extraUpdatedCols" RTE field
in favor of identifying which generated columns depend on updated
columns during executor startup. In HEAD we can remove
extraUpdatedCols altogether; in back branches, it's still there but
always empty. Another difference between the HEAD and back-branch
versions of this patch is that in HEAD we can add the new bitmap field
to ResultRelInfo, but that would cause an ABI break in back branches.
Like 4b3e37993, add a List field at the end of struct EState instead.
Back-patch to v13. The bogus calculation is also being made in v12,
but it doesn't have the same visible effect because we don't use it
to decide which generated columns to recalculate; as a consequence of
which the patch doesn't apply easily. I think that there might still
be a demonstrable bug associated with trigger firing conditions, but
that's such a weird corner-case usage that I'm content to leave it
unfixed in v12.
Amit Langote and Tom Lane
Discussion: https://postgr.es/m/CA+HiwqFshLKNvQUd1DgwJ-7tsTp=dwv7KZqXC4j2wYBV1aCDUA@mail.gmail.com
Discussion: https://postgr.es/m/2793383.1672944799@sss.pgh.pa.us
While on it, newlines are removed from the end of two elog() strings.
The others are simple grammar mistakes. One comment in pg_upgrade
referred incorrectly to sequences since a7e5457.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20221230231257.GI1153@telsasoft.com
Backpatch-through: 11
Cirrus is about to shut down its macOS-on-Intel support, so it's time to
move our CI testing over to ARM instances. The Homebrew package manager
changed its default installation prefix for the new architecture, so a
couple of tests need tweaks to find binaries.
Back-patch to 15, where in-tree CI began.
Author: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20221122225744.GF11463%40telsasoft.com
The test added in commit e44dae07f9 has a thinko: it wants to read
info about a few WAL records, but it obtains the LSN of the final record
to read by asking for the WAL insert position; however,
pg_get_wal_records_info only accepts to read up to the flush position
(cf. IsFutureLSN()). In normal conditions there is no difference, since
the last record written by the preceding loop is known flushed and it's
the one the test wants; but it's possible to have some other process
insert another WAL record that isn't flushed, and that causes the whole
test to explode.
Fix by having pg_get_wal_records_info() read only up to the flushed
position. Backpatch to 15, which is where pg_walinspect appeared.
Author: Karina Litskevich <litskevichkarina@gmail.com>
Discussion: https://postgr.es/m/a5559c95-52c3-5eea-cd63-9b4f1c70ff96@gmail.com
Such references failed with "cache lookup failed for type 0"
because we didn't resolve the type of the CYCLE column until after
analyzing the CTE's query. We can just move that processing
to before the recursive parse_sub_analyze call, though.
While here, invent a couple of local variables to make this
code less egregiously wider-than-80-columns.
Per bug #17723 from Vik Fearing. Back-patch to v14 where
the CYCLE feature was added.
Discussion: https://postgr.es/m/17723-2c4985ff111e7bba@postgresql.org
It seems that drop-index-concurrently-1 has started to forget what it was
originally meant to be testing. d2d8a229b, which added incremental sorts
changed the expected plan to be an Index Scan plan instead of a Seq Scan
plan. This occurred as the primary key index of the table in question
provided presorted input and, because that index happened to be the
cheapest input path due to enable_seqscan being disabled, the incremental
sort changes just added a Sort on top of that. It seems based on the name
of the PREPAREd statement that the intention here is that the query
produces a seqscan plan.
The reason this test has become broken seems to be due to how the test was
originally coded. The test was trying to force a seqscan plan by
performing some casting to make it so the test_dc index couldn't be used
to perform the required filtering. Trying to coax the planner into using
a plan which has costed in a disable_cost seems like it's always going to
be flakey as small changes in costs are drowned out by the large
disable_cost combined with add_path's STD_FUZZ_FACTOR. Here we get rid of
the casts that we're using to try to trick the planner into a seqscan and
instead toggle enable_seqscan as and when required to get the desired
plan.
Additionally, rename a few things in the test and add some additional
wording to the comments to try and make it more clear in the future what
we expect this test to be doing.
Discussion: https://postgr.es/m/CAApHDvrbDhObhLV+=U_K_-t+2Av2av1aL9d+2j_3AO-XndaviA@mail.gmail.com
Backpatch-through: 13, where d2d8a229b changed the expected test output
jsonb_get_element() was incautious enough to use VARDATA() and
VARSIZE() directly on an arbitrary text Datum. That of course
fails if the Datum is short-header, compressed, or out-of-line.
The typical result would be failing to match any element of a
jsonb object, though matching the wrong one seems possible as well.
setPathObject() was slightly brighter, in that it used VARDATA_ANY
and VARSIZE_ANY_EXHDR, but that only kept it out of trouble for
short-header Datums. push_path() had the same issue. This could
result in faulty subscripted insertions, though keys long enough to
cause a problem are likely rare in the wild.
Having seen these, I looked around for unsafe usages in the rest
of the adt/json* files. There are a couple of places where it's not
immediately obvious that the Datum can't be compressed or out-of-line,
so I added pg_detoast_datum_packed() to cope if it is. Also, remove
some other usages of VARDATA/VARSIZE on Datums we just extracted from
a text array. Those aren't actively broken, but they will become so
if we ever start allowing short-header array elements, which does not
seem like a terribly unreasonable thing to do. In any case they are
not great coding examples, and they could also do with comments
pointing out that we're assuming we don't need pg_detoast_datum_packed.
Per report from exe-dealer@yandex.ru. Patch by me, but thanks to
David Johnston for initial investigation. Back-patch to v14 where
jsonb subscripting was introduced.
Discussion: https://postgr.es/m/205321670615953@mail.yandex.ru
Commit 7103ebb7aa added support for MERGE, which included support for
inheritance hierarchies, but didn't document the fact that ONLY could
be specified before the source and/or target tables to exclude tables
inheriting from the tables specified.
Update merge.sgml to mention this, and while at it, add some
regression tests to cover it.
Dean Rasheed, reviewed by Nathan Bossart.
Backpatch to 15, where MERGE was added.
Discussion: https://postgr.es/m/CAEZATCU0XM-bJCvpJuVRU3UYNRqEBS6g4-zH%3Dj9Ye0caX8F6uQ%40mail.gmail.com
A couple of places weren't up to speed for this. By sheer good
luck, we didn't fail but just selected a non-memoized join plan,
at least in the test case we have. Nonetheless, it's a bug,
and I'm not quite sure that it couldn't have worse consequences
in other examples. So back-patch to v14 where Memoize came in.
Richard Guo
Discussion: https://postgr.es/m/CAMbWs48GkNom272sfp0-WeD6_0HSR19BJ4H1c9ZKSfbVnJsvRg@mail.gmail.com
When updating a relation with a rule whose action performed an INSERT
from a multi-row VALUES list, the rewriter might skip processing the
VALUES list, and therefore fail to replace any DEFAULTs in it. This
would lead to an "unrecognized node type" error.
The reason was that RewriteQuery() assumed that a query doing an
INSERT from a multi-row VALUES list would necessarily only have one
item in its fromlist, pointing to the VALUES RTE to read from. That
assumption is correct for the original query, but not for product
queries produced for rule actions. In such cases, there may be
multiple items in the fromlist, possibly including multiple VALUES
RTEs.
What is required instead is for RewriteQuery() to skip any RTEs from
the product query's originating query, which might include one or more
already-processed VALUES RTEs. What's left should then include at most
one VALUES RTE (from the rule action) to be processed.
Patch by me. Thanks to Tom Lane for reviewing.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/CAEZATCV39OOW7LAR_Xq4i%2BLc1Byux%3DeK3Q%3DHD_pF1o9LBt%3DphA%40mail.gmail.com
When the relkind of a relache entry changes, because a table is converted into
a view, pgstats can get confused in 15+, leading to crashes or assertion
failures.
For HEAD, Tom fixed this in b23cd185fd, by removing support for converting a
table to a view, removing the source of the inconsistency. This commit just
adds an assertion that a relcache entry's relkind does not change, just in
case we end up with another case of that in the future. As there's no cases of
changing relkind anymore, we can't add a test that that's handled correctly.
For 15, fix the problem by not maintaining the association with the old pgstat
entry when the relkind changes during a relcache invalidation processing. In
that case the pgstat entry needs to be unlinked first, to avoid
PgStat_TableStatus->relation getting out of sync. Also add a test reproducing
the issues.
No known problem exists in 11-14, so just add the test there.
Reported-by: vignesh C <vignesh21@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CALDaNm2yXz+zOtv7y5zBd5WKT8O0Ld3YxikuU3dcyCvxF7gypA@mail.gmail.com
Discussion: https://postgr.es/m/CALDaNm3oZA-8Wbps2Jd1g5_Gjrr-x3YWrJPek-mF5Asrrvz2Dg@mail.gmail.com
Backpatch: 15-
Some options of these commands need to be able to identify the start
of the function body within the output of pg_get_functiondef().
It used to be that that always began with "AS", but since the
introduction of new-style SQL functions, it might also start with
"BEGIN" or "RETURN". Fix that on the psql side, and add some
regression tests.
Noted by me awhile ago, but I didn't do anything about it.
Thanks to David Johnston for a nag.
Discussion: https://postgr.es/m/AM9PR01MB8268D5CDABDF044EE9F42173FE8C9@AM9PR01MB8268.eurprd01.prod.exchangelabs.com
For Updates and Deletes, we were not honoring the columns list for old
tuple values while sending tuple data via pgoutput. This results in
pgoutput emitting more columns than expected.
This is not a problem for built-in logical replication as we simply ignore
additional columns based on the relation information sent previously which
didn't have those columns. However, some other users of pgoutput plugin
may expect the columns as per the column list. Also, sending extra columns
unnecessarily consumes network bandwidth defeating the purpose of the
column list feature.
Reported-by: Gunnar Morling
Author: Hou Zhijie
Reviewed-by: Amit Kapila
Backpatch-through: 15
Discussion: https://postgr.es/m/CADGJaX9kiRZ-OH0EpWF5Fkyh1ZZYofoNRCrhapBfdk02tj5EKg@mail.gmail.com
In commit 40c24bfef, I forgot to use get_rule_expr_paren() for the
arguments of AT TIME ZONE, resulting in possibly not printing parens
for expressions that need it. But get_rule_expr_paren() wouldn't have
gotten it right anyway, because isSimpleNode() hadn't been taught that
COERCE_SQL_SYNTAX parent nodes don't guarantee sufficient parentheses.
Improve all that. Also use this methodology for F_IS_NORMALIZED, so
that we don't print useless parens for that.
In passing, remove a comment that was obsoleted later.
Per report from Duncan Sands. Back-patch to v14 where this code
came in. (Before that, we didn't try to print AT TIME ZONE that way,
so there was no bug just ugliness.)
Discussion: https://postgr.es/m/f41566aa-a057-6628-4b7c-b48770ecb84a@deepbluecap.com
Writing "pg_regress --dbname= ..." led to a crash, because
we weren't expecting there to be no database name supplied.
It doesn't seem like a great idea to run regression tests
in whatever is the user's default database; so rather than
supporting this case let's explicitly reject it.
Per report from Xing Guo. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/CACpMh+A8cRvtvtOWVAZsCM1DU81GK4DL26R83y6ugZ1osV=ifA@mail.gmail.com
The JOIN_SEMI case Assert'ed that there are no PlaceHolderVars that
need to be evaluated at the semijoin's RHS, which is wrong because
there could be some in the semijoin's qual condition. However, there
could not be any references further up than that, and within the qual
there is not any way that such a PHV could have gone to null yet, so
we don't really need the PHV and there is no need to avoid making the
RHS-removal optimization. The upshot is that there's no actual bug
in production code, and we ought to just remove this misguided Assert.
While we're here, also drop the JOIN_RIGHT case, which is dead code
because reduce_outer_joins() already got rid of JOIN_RIGHT.
Per bug #17700 from Xin Wen. Uselessness of the JOIN_RIGHT case
pointed out by Richard Guo. Back-patch to v12 where this code
was added.
Discussion: https://postgr.es/m/17700-2b5c10d917c30687@postgresql.org
Currently there is a race condition where if concurrent TAP tests both
test that they can open a port they will assume that it is free and use
it, causing one of them to fail. To prevent this we record a reservation
using an exclusive lock, and any TAP test that discovers a reservation
checks to see if the reserving process is still alive, and looks for
another free port if it is.
Ports are reserved in a directory set by the environment setting
PG_TEST_PORT_DIR, or if that doesn't exist a subdirectory of the top
build directory as set by Makefile.global, or its own
tmp_check directory.
The prove_check recipe in Makefile.global.in is extended to export
top_builddir to the TAP tests. This was already exported by the
prove_installcheck recipes.
Per complaint from Andres Freund
Backpatched from 9b4eafcaf4 to all live branches
Discussion: https://postgr.es/m/20221002164931.d57hlutrcz4d2zi7@awork3.anarazel.de
The test output varies when debug_discard_caches is enabled,
because that causes extra executions of recomputeNamespacePath.
Maybe putting a hook in that was a bad idea, but as a stopgap,
just turn off debug_discard_caches in this test.
Per buildfarm (now that we have debug_discard_caches coverage
again). Back-patch to v15 where this module was added.
Discussion: https://postgr.es/m/2267406.1668804934@sss.pgh.pa.us
Version strings with unequal numbers of parts were being compared
incorrectly. We cure this by treating a missing part in the shorter
version as 0.
per complaint from Jehan-Guillaume de Rorthais, but the fix is mine, not
his.
Discussion: https://postgr.es/m/20220628225325.53d97b8d@karst
Backpatch to release 14 where this code was introduced.
The current code looks for the sample file in the source directory, but
it seems better to test against the installed sample file.
Backpatch to release 15 where the test was introduced.
Discussion: https://postgr.es/m/73eea68e-3b6f-5f63-6024-25ed26b52016@dunslane.net
Reviewed by Tom Lane, Alvaro Herrera, Michael Paquier.
Currently this only allows for one argument, which must be present, and
always returns a single string. With this change the following now all
work:
$all_config = $node->config_data;
%config_map = ($node->config_data);
$incdir = $node->config_data('--include-dir');
($incdir, $sharedir) = $node->config_data(
qw(--include-dir --share-dir));
Backpatch to release 15 where this was introduced.
Discussion: https://postgr.es/m/73eea68e-3b6f-5f63-6024-25ed26b52016@dunslane.net
Reviewed by Tom Lane, Alvaro Herrera, Michael Paquier.
Test files should now ignore has_wal_read_bug() so long as
wait_for_catchup() is their only known way of reaching the bug. That's
at least five files today, a number expected to grow over time. This
commit removes skip logic from three. By doing so, systems having the
bug regain the ability to catch other kinds of defects via those three
tests. The other two, 002_databases.pl and 031_recovery_conflict.pl,
have been unprotected. Back-patch to v15, where done_testing() first
became our standard.
Discussion: https://postgr.es/m/20221030031639.GA3082137@rfd.leadboat.com
The stanza "SET STORAGE may need to add a TOAST table" does not
test what it's supposed to, and hasn't done so since we added
the ability to store constant column default values as metadata.
We need to use a non-constant default to get the expected table
rewrite to actually happen.
Fix that, and add the missing checks that would have exposed the
problem to begin with.
Noted while reviewing a patch that made changes in this test case.
Back-patch to v11 where the problem came in.
"Triggers on partitioned tables cannot have transition tables." is
incorrect as we allow statement-level triggers on partitioned tables to
have transition tables.
This has been wrong since commit 86f575948; back-patch to v11 where that
commit came in.
Reviewed by Tom Lane.
Discussion: https://postgr.es/m/CAPmGK17gk4vXLzz2iG%2BG4LWRWCoVyam70nZ3OuGm1hMJwDrhcg%40mail.gmail.com
Commit f56f8f8da6 added some code in CloneFkReferencing that's way too
lax about a Constraint node it manufactures, not initializing enough
struct members -- initially_valid in particular was forgotten. This
causes some FKs in partitions added by ALTER TABLE ATTACH PARTITION to
be marked as not validated. Set initially_valid true, which fixes the
bug.
While at it, make the struct initialization more complete. Very similar
code was added in two other places by the same commit; make them all
follow the same pattern for consistency, though no bugs are apparent
there.
This bug has never been reported: I only happened to notice while
working on commit 614a406b4f. The test case that was added there with
the improper result is repaired.
Backpatch to 12.
Discussion: https://postgr.es/m/20221005105523.bhuhkdx4olajboof@alvherre.pgsql
Some cases would result in "cache lookup failed for statistics object",
due to trying to fetch inherited statistics when only non-inherited
ones are available or vice versa.
Richard Guo and Justin Pryzby
Discussion: https://postgr.es/m/20221030170520.GM16921@telsasoft.com
As currently designed, with a callback registered in a ERROR_CLEANUP
block, the shutdown callback would get called twice when updating
archive_library on SIGHUP, which is something that we want to avoid to
ease the life of extension writers.
Anyway, an ERROR in the archiver process is treated as a FATAL, stopping
it immediately, hence there is no need for a ERROR_CLEANUP block.
Instead of that, the shutdown callback is not called upon
before_shmem_exit(), giving to the modules the opportunity to do any
cleanup actions before the server shuts down its subsystems.
While on it, this commit adds some testing coverage for the shutdown
callback. Neither shell_archive nor basic_archive have been using it,
and one is added to shell_archive, whose trigger is checked in a TAP
test through a shutdown sequence.
Author: Nathan Bossart, Bharath Rupireddy
Reviewed-by: Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/20221015221328.GB1821022@nathanxps13
Backpatch-through: 15
If the non-recursive term of a SEARCH BREADTH FIRST recursive
query has only constants in its target list, the planner will
fold the starting RowExpr added by rewrite into a simple Const
of type RECORD. The executor doesn't have any problem with
that --- but EXPLAIN VERBOSE will encounter the Const as the
ultimate source of truth about what the field names of the
SET column are, and it didn't know what to do with that.
Fortunately, we can pull the identifying typmod out of the
Const, in much the same way that record_out would.
For reasons that remain a bit obscure to me, this only fails
with SEARCH BREADTH FIRST, not SEARCH DEPTH FIRST or CYCLE.
But I added regression test cases for both of those options
too, just to make sure we don't break it in future.
Per bug #17644 from Matthijs van der Vleuten. Back-patch
to v14 where these constructs were added.
Discussion: https://postgr.es/m/17644-3bd1f3036d6d7a16@postgresql.org
When a query whose results were requested in single-row mode is the last
in the queue by the time those results are being read, the single-row
flag was not being reset, because we were returning early from
pqPipelineProcessQueue. Move that stanza up so that the flag is always
reset at the end of sending that query's results.
Add a test for the situation.
Backpatch to 14.
Author: Denis Laxalde <denis.laxalde@dalibo.com>
Discussion: https://postgr.es/m/01af18c5-dacc-a8c8-07ee-aecc7650c3e8@dalibo.com
DEFAULT markers appearing in an INSERT on an updatable view
could be mis-processed if they were in a multi-row VALUES clause.
This would lead to strange errors such as "cache lookup failed
for type NNNN", or in older branches even to crashes.
The cause is that commit 41531e42d tried to re-use rewriteValuesRTE()
to remove any SetToDefault nodes (that hadn't previously been replaced
by the view's own default values) appearing in "product" queries,
that is DO ALSO queries. That's fundamentally wrong because the
DO ALSO queries might not even be INSERTs; and even if they are,
their targetlists don't necessarily match the view's column list,
so that almost all the logic in rewriteValuesRTE() is inapplicable.
What we want is a narrow focus on replacing any such nodes with NULL
constants. (That is, in this context we are interpreting the defaults
as being strictly those of the view itself; and we already replaced
any that aren't NULL.) We could add still more !force_nulls tests
to further lobotomize rewriteValuesRTE(); but it seems cleaner to
split out this case to a new function, restoring rewriteValuesRTE()
to the charter it had before.
Per bug #17633 from jiye_sw. Patch by me, but thanks to
Richard Guo and Japin Li for initial investigation.
Back-patch to all supported branches, as the previous fix was.
Discussion: https://postgr.es/m/17633-98cc85e1fa91e905@postgresql.org
There are a number of bugs in this area. Two of them are fixed here,
namely:
1. get_relation_idx_constraint_oid does not restrict the type of
constraint that's returned, so with sufficient bad luck it can
return the OID of a foreign key constraint. This has the effect that
a primary key in a partition can end up as a child of a foreign key,
which makes no sense (it needs to be the child of the equivalent
primary key.)
Change the API contract so that only index-backed constraints are
returned, mimicking get_constraint_index().
2. Both CloneFkReferenced and CloneFkReferencing clone a
self-referencing foreign key, so the partition ends up with
a duplicate foreign key. Change the former function to ignore such
constraints.
Add some tests to verify that things are better now. (However, these
new tests show some additional misbehavior that will be fixed later --
namely that there's a constraint marked NOT VALID.)
Backpatch to 12, where these constraints are possible at all.
Author: Jehan-Guillaume de Rorthais <jgdr@dalibo.com>
Discussion: https://postgr.es/m/20220603154232.1715b14c@karst
This reverts commit db0d67db24 and
several follow-on fixes. The idea of making a cost-based choice
of the order of the sorting columns is not fundamentally unsound,
but it requires cost information and data statistics that we don't
really have. For example, relying on procost to distinguish the
relative costs of different sort comparators is pretty pointless
so long as most such comparator functions are labeled with cost 1.0.
Moreover, estimating the number of comparisons done by Quicksort
requires more than just an estimate of the number of distinct values
in the input: you also need some idea of the sizes of the larger
groups, if you want an estimate that's good to better than a factor of
three or so. That's data that's often unknown or not very reliable.
Worse, to arrive at estimates of the number of calls made to the
lower-order-column comparison functions, the code needs to make
estimates of the numbers of distinct values of multiple columns,
which are necessarily even less trustworthy than per-column stats.
Even if all the inputs are perfectly reliable, the cost algorithm
as-implemented cannot offer useful information about how to order
sorting columns beyond the point at which the average group size
is estimated to drop to 1.
Close inspection of the code added by db0d67db2 shows that there
are also multiple small bugs. These could have been fixed, but
there's not much point if we don't trust the estimates to be
accurate in-principle.
Finally, the changes in cost_sort's behavior made for very large
changes (often a factor of 2 or so) in the cost estimates for all
sorting operations, not only those for multi-column GROUP BY.
That naturally changes plan choices in many situations, and there's
precious little evidence to show that the changes are for the better.
Given the above doubts about whether the new estimates are really
trustworthy, it's hard to summon much confidence that these changes
are better on the average.
Since we're hard up against the release deadline for v15, let's
revert these changes for now. We can always try again later.
Note: in v15, I left T_PathKeyInfo in place in nodes.h even though
it's unreferenced. Removing it would be an ABI break, and it seems
a bit late in the release cycle for that.
Discussion: https://postgr.es/m/TYAPR01MB586665EB5FB2C3807E893941F5579@TYAPR01MB5866.jpnprd01.prod.outlook.com
I (Álvaro) broke tab-completion for GRANT .. ALL TABLES IN SCHEMA while
removing ALL from the publication syntax for schemas in the
aforementioned commit. I also missed to update a bunch of
tab-completion rules for ALTER/CREATE PUBLICATION that match each
individual piece of ALL TABLES IN SCHEMA. Repair those bugs.
While fixing up that commit, update a couple of outdated comments
related to the same change.
Backpatch to 15.
Author: Shi yu <shiy.fnst@fujitsu.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Discussion: https://postgr.es/m/OSZPR01MB6310FCE8609185A56344EED2FD559@OSZPR01MB6310.jpnprd01.prod.outlook.com
While at it, remove an unused queryString parameter from
CheckPubRelationColumnList() and make other minor stylistic changes.
Backpatch to 15.
Reported by Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Co-authored-by: Hou zj <houzj.fnst@fujitsu.com>
Discussion: https://postgr.es/m/20220926.160426.454497059203258582.horikyota.ntt@gmail.com
Commit 25936fd46 adjusted things so that the "storeslot" we use
for remapping trigger tuples would have adequate lifespan, but it
neglected to consider the lifespan of the tuple descriptor that
the slot depends on. It turns out that in at least some cases, the
tupdesc we are passing is a refcounted tupdesc, and the refcount for
the slot's reference can get assigned to a resource owner having
different lifespan than the slot does. That leads to an error like
"tupdesc reference 0x7fdef236a1b8 is not owned by resource owner
SubTransaction". Worse, because of a second oversight in the same
commit, we'd try to free the same tupdesc refcount again while
cleaning up after that error, leading to recursive errors and an
"ERRORDATA_STACK_SIZE exceeded" PANIC.
To fix the initial problem, let's just make a non-refcounted copy
of the tupdesc we're supposed to use. That seems likely to guard
against additional problems, since there's no strong reason for
this code to assume that what it's given is a refcounted tupdesc;
in which case there's an independent hazard of the tupdesc having
shorter lifespan than the slot does. (I didn't bother trying to
free said copy, since it should go away anyway when the (sub)
transaction context is cleaned up.)
The other issue can be fixed by making the code added to
AfterTriggerFreeQuery work like the rest of that function, ie be
sure that it doesn't try to free the same slot twice in the event
of recursive error cleanup.
While here, also clean up minor stylistic issues in the test case
added by 25936fd46: don't use "create or replace function", as any
name collision within the tests is likely to have ill effects
that that won't mask; and don't use function names as generic as
trigger_function1, especially if you're not going to drop them
at the end of the test stanza.
Per bug #17607 from Thomas Mc Kay. Back-patch to v12, as the
previous fix was.
Discussion: https://postgr.es/m/17607-bd8ccc81226f7f80@postgresql.org
Commit 4fb5c794e intended to add coverage of some ambuildempty
methods that were not getting reached, without removing any
test coverage. However, by changing a temp table to unlogged
it managed to negate the intent of 4c51a2d1e, which means that
we didn't have reliable test coverage of ginvacuum.c anymore.
As things stand, much of that file might or might not get reached
depending on timing, which seems pretty undesirable.
Although this is only clearly broken for the GIN test, it seems
best to revert 4fb5c794e altogether and instead add bespoke test
cases covering unlogged indexes for these four AMs. We don't
need to do very much with them, so the extra tests are cheap.
(Note that btree, hash, and bloom already have similar test cases,
so they need no additional work.)
We can also undo dec8ad367. Since the testing deficiency that that
hacked around was later fixed by 2f2e24d90, let's intentionally leave
an unlogged table behind to improve test coverage in the modules that
use the regression database for other test purposes. (The case I used
also leaves an unlogged sequence behind.)
Per report from Alex Kozhemyakin. Back-patch to v15 where the
faulty test came in.
Discussion: https://postgr.es/m/b00c8ee096ee46cd25c183125562a1a7@postgrespro.ru
Because index creation does not go through heap_create_with_catalog() we
didn't call pgstat_create_relation(), leading to index stats of a newly
created realtion not getting dropped during rollback. To fix, move the
pgstat_create_relation() to heap_create(), which indexes do use.
Similarly, because dropping an index does not go through
heap_drop_with_catalog(), we didn't drop index stats when the transaction
dropping an index committed. Here there's no convenient common path for
indexes and relations, so index_drop() now calls pgstat_drop_relation().
Add tests for transactional index stats handling.
Author: "Drouvot, Bertrand" <bdrouvot@amazon.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/51bbf286-2b4a-8998-bd12-eaae4b765d99@amazon.com
Backpatch: 15-, like 8b1dccd37c, which introduced the bug
The extended query protocol implementation I added in commit
acb7e4eb6b has bugs when used in pipeline mode. Rather than spend
more time trying to fix it, remove that code and make the function rely
on simple query protocol only, meaning it can no longer be used in
pipeline mode.
Users can easily change their applications to use PQsendQueryParams
instead. We leave PQsendQuery in place for Postgres 14, just in case
somebody is using it and has not hit the mentioned bugs; but we should
recommend that it not be used.
Backpatch to 15.
Per bug report from Gabriele Varrazzo.
Discussion: https://postgr.es/m/CA+mi_8ZGSQNmW6-mk_iSR4JZB_LJ4ww3suOF+1vGNs3MrLsv4g@mail.gmail.com
The "emulation" I wrote for PQsendQuery in pipeline mode to use extended
query protocol, in commit acb7e4eb6b, is problematic. Due to numerous
bugs we'll soon remove it. As a first step and for all branches back to
14, stop using PQsendQuery in libpq_pipeline. Also remove a few test
lines that will no longer be relevant.
Backpatch to 14.
Discussion: https://postgr.es/m/CA+mi_8ZGSQNmW6-mk_iSR4JZB_LJ4ww3suOF+1vGNs3MrLsv4g@mail.gmail.com
We previously thought that allowing such cases can confuse users when they
specify DROP TABLES IN SCHEMA but that doesn't seem to be the case based
on discussion. This helps to uplift the restriction during
ALTER TABLE ... SET SCHEMA which used to ensure that we couldn't end up
with a publication having both a schema and the same schema's table.
To allow this, we need to forbid having any schema on a publication if
column lists on a table are specified (and vice versa). This is because
otherwise we still need a restriction during ALTER TABLE ... SET SCHEMA to
forbid cases where it could lead to a publication having both a schema and
the same schema's table with column list.
Based on suggestions by Peter Eisentraut.
Author: Hou Zhijie and Vignesh C
Reviewed-By: Peter Smith, Amit Kapila
Backpatch-through: 15, where it was introduced
Discussion: https://postgr.es/m/2729c9e2-9aac-8cda-f2f4-34f2bcc18f4e@enterprisedb.com
This may be a bit too subtle, but removing that word from there makes
this clause no longer a perfect parallel of the GRANT variant "ALL
TABLES IN SCHEMA": indeed, for publications what we record is the schema
itself, not the tables therein, which means that any tables added to the
schema in the future are also published. This is completely different
to what GRANT does, which is affect only the tables that exist when the
command is executed.
There isn't resounding support for this change, but there are a few
positive votes and no opposition. Because the time to 15 RC1 is very
short, let's get this out now.
Backpatch to 15.
Discussion: https://postgr.es/m/2729c9e2-9aac-8cda-f2f4-34f2bcc18f4e
For publication schemas (OBJECT_PUBLICATION_NAMESPACE) and user
mappings (OBJECT_USER_MAPPING), pg_get_object_address() checked the
array length of the second argument, but not of the first argument.
If the first argument was too long, it would just silently ignore
everything but the first argument. Fix that by checking the length of
the first argument as well.
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/caaef70b-a874-1088-92ef-5ac38269c33b%40enterprisedb.com
Very occasionally the stats test failed due to the number of sessions not
being updated yet. Likely this requires that there is contention on the
database's stats entry. Solve this by forcing pending stats to be flushed
before fetching the stats.
I verified that there are no other test failures after making
pgstat_report_stat() only flush stats when force = true.
Per message from Tom Lane and buildfarm member crake.
Discussion: https://postgr.es/m/3428246.1663271992@sss.pgh.pa.us
Backpatch: 15-, where 5264add784 added the test
I happened to notice that libpq_pipeline's private implementation
of pg_fatal lacked any pg_attribute_printf decoration. Indeed,
adding that turned up a mistake! We'd likely never have noticed
because the error exits in this code are unlikely to get hit,
but still, it's a bug.
We're so used to having the compiler check this stuff for us that
a printf-like function without pg_attribute_printf is a land mine.
I wonder if there is a way to detect such omissions.
Back-patch to v14 where this code came in.
Commit c4c340088 changed geometric operators to use float4 and float8
functions, and handle NaN's in a better way. The circle sameness test
had a typo in the code which resulted in all comparisons with the left
circle having a NaN radius considered same.
postgres=# select '<(0,0),NaN>'::circle ~= '<(0,0),1>'::circle;
?column?
----------
t
(1 row)
This fixes the sameness test to consider the radius of both the left
and right circle.
Backpatch to v12 where this was introduced.
Author: Ranier Vilela <ranier.vf@gmail.com>
Discussion: https://postgr.es/m/CAEudQAo8dK=yctg2ZzjJuzV4zgOPBxRU5+Kb+yatFiddtQk6Rw@mail.gmail.com
Backpatch-through: v12
During ALTER TABLE ATTACH PARTITION, if the name of a parent's foreign
key constraint is already used on the partition, the code tries to
choose another one before the FK attributes list has been populated,
so the resulting constraint name was "<relname>__fkey" instead of
"<relname>_<attrs>_fkey". Repair, and add a test case.
Backpatch to 12. In 11, the code to attach a partition was not smart
enough to cope with conflicting constraint names, so the problem doesn't
exist there.
Author: Jehan-Guillaume de Rorthais <jgdr@dalibo.com>
Discussion: https://postgr.es/m/20220901184156.738ebee5@karst
The addition of published column names forgot to filter on attisdropped,
leading to cases where you could see "........pg.dropped.1........"
or the like as a reportedly-published column.
While we're here, rewrite the new subquery to get a more efficient plan
for it.
Hou Zhijie, per report from Jaime Casanova. Back-patch to v15 where
the bug was introduced. (Sadly, this means we need a post-beta4
catversion bump before beta4 has even hit the streets. I see no
good alternative though.)
Discussion: https://postgr.es/m/Yxa1SU4nH2HfN3/i@ahch-to
Commit e3fcca0d0d reverted modifications to HOT for BRIN, but it also
removed a couple unrelated tests from stats.sql. Reinstate those tests.
Reported-by: Peter Eisentraut
Commit db0d67db2 tweaked sort costing, which however resulted in a
couple plan changes in our regression tests. Most of the new plans were
fine, but partition_aggregate were meant to test parallel plans and the
new plans were serial.
Fix that by lowering parallel_setup_cost to 0, which is enough to switch
to the parallel plan again.
Report and patch by David Rowley.
Author: David Rowley
Reviewed-by: Tomas Vondra
Discussion: https://postgr.es/m/CAApHDvpVFgWzXdtUQkjyOPhNrNvumRi_=ftgS79KeAZ92tnHKQ@mail.gmail.com
The reverts the following and makes some associated cleanups:
commit f79b803dc: Common SQL/JSON clauses
commit f4fb45d15: SQL/JSON constructors
commit 5f0adec25: Make STRING an unreserved_keyword.
commit 33a377608: IS JSON predicate
commit 1a36bc9db: SQL/JSON query functions
commit 606948b05: SQL JSON functions
commit 49082c2cc: RETURNING clause for JSON() and JSON_SCALAR()
commit 4e34747c8: JSON_TABLE
commit fadb48b00: PLAN clauses for JSON_TABLE
commit 2ef6f11b0: Reduce running time of jsonb_sqljson test
commit 14d3f24fa: Further improve jsonb_sqljson parallel test
commit a6baa4bad: Documentation for SQL/JSON features
commit b46bcf7a4: Improve readability of SQL/JSON documentation.
commit 112fdb352: Fix finalization for json_objectagg and friends
commit fcdb35c32: Fix transformJsonBehavior
commit 4cd8717af: Improve a couple of sql/json error messages
commit f7a605f63: Small cleanups in SQL/JSON code
commit 9c3d25e17: Fix JSON_OBJECTAGG uniquefying bug
commit a79153b7a: Claim SQL standard compliance for SQL/JSON features
commit a1e7616d6: Rework SQL/JSON documentation
commit 8d9f9634e: Fix errors in copyfuncs/equalfuncs support for JSON node types.
commit 3c633f32b: Only allow returning string types or bytea from json_serialize
commit 67b26703b: expression eval: Fix EEOP_JSON_CONSTRUCTOR and EEOP_JSONEXPR size.
The release notes are also adjusted.
Backpatch to release 15.
Discussion: https://postgr.es/m/40d2c882-bcac-19a9-754d-4299e1d87ac7@postgresql.org
When creating a partitioned index, DefineIndex tries to identify
any existing indexes on the partitions that match the partitioned
index, so that it can absorb those as child indexes instead of
building new ones. Part of the matching is to compare IndexInfo
structs --- but that wasn't done quite right. We're comparing
the IndexInfo built within DefineIndex itself to one made from
existing catalog contents by BuildIndexInfo. Notably, while
BuildIndexInfo will run index expressions and predicates through
expression preprocessing, that has not happened to DefineIndex's
struct. The result is failure to match and subsequent creation
of duplicate indexes.
The easiest and most bulletproof fix is to build a new IndexInfo
using BuildIndexInfo, thereby guaranteeing that the processing done
is identical.
While here, let's also extract the opfamily and collation data
from the new partitioned index, removing ad-hoc logic that
duplicated knowledge about how those are constructed.
Per report from Christophe Pettus. Back-patch to v11 where
we invented partitioned indexes.
Richard Guo and Tom Lane
Discussion: https://postgr.es/m/8864BFAA-81FD-4BF9-8E06-7DEB8D4164ED@thebuild.com
This event can happen when using SET ACCESS METHOD, as the data files of
the materialized need a full refresh but this command tag was not
updated to reflect that. The documentation is updated to track this
behavior.
Author: Onder Kalaci
Discussion: https://postgr.es/m/CACawEhXwHN3X34FiwoYG8vXR-oyUdrp7qcfRWSzS+NPahS5gSw@mail.gmail.com
Backpatch-through: 15
The current publisher code checks if UPDATE or DELETE can be executed with
the replica identity of the table even if it's a partitioned table. We can
skip checking the replica identity for partitioned tables because the
operations are actually performed on the leaf partitions (not the
partitioned table).
Reported-by: Brad Nicholson
Author: Hou Zhijie
Reviewed-by: Peter Smith, Amit Kapila
Backpatch-through: 13
Discussion: https://postgr.es/m/CAMMnM%3D8i5DohH%3DYKzV0_wYuYSYvuOJoL9F5nzXTc%2ByzsG1f6rg%40mail.gmail.com
The grammar added for MERGE inadvertently made it accepted syntax in
places that were not prepared to deal with it -- namely COPY and inside
CTEs, but invoking these things with MERGE currently causes assertion
failures or weird misbehavior in non-assertion builds. Protect those
places by checking for it explicitly until somebody decides to implement
it.
Reported-by: Alexey Borzov <borz_off@cs.msu.su>
Discussion: https://postgr.es/m/17579-82482cd7b267b862@postgresql.org
fmgr_sql must make expanded-datum arguments read-only, because
it's possible that the function body will pass the argument to
more than one callee function. If one of those functions takes
the datum's R/W property as license to scribble on it, then later
callees will see an unexpected value, leading to wrong answers.
From a performance standpoint, it'd be nice to skip this in the
common case that the argument value is passed to only one callee.
However, detecting that seems fairly hard, and certainly not
something that I care to attempt in a back-patched bug fix.
Per report from Adam Mackler. This has been broken since we
invented expanded datums, so back-patch to all supported branches.
Discussion: https://postgr.es/m/WScDU5qfoZ7PB2gXwNqwGGgDPmWzz08VdydcPFLhOwUKZcdWbblbo-0Lku-qhuEiZoXJ82jpiQU4hOjOcrevYEDeoAvz6nR0IU4IHhXnaCA=@mackler.email
Discussion: https://postgr.es/m/187436.1660143060@sss.pgh.pa.us
Per buildfarm, the output order of \dx+ isn't consistent across
locales. Apply NO_LOCALE to force C locale. There might be a
more localized way, but I'm not seeing it offhand, and anyway
there is nothing in this test module that particularly cares
about locales.
Security: CVE-2022-2625
Previously, if an extension script did CREATE OR REPLACE and there was
an existing object not belonging to the extension, it would overwrite
the object and adopt it into the extension. This is problematic, first
because the overwrite is probably unintentional, and second because we
didn't change the object's ownership. Thus a hostile user could create
an object in advance of an expected CREATE EXTENSION command, and would
then have ownership rights on an extension object, which could be
modified for trojan-horse-type attacks.
Hence, forbid CREATE OR REPLACE of an existing object unless it already
belongs to the extension. (Note that we've always forbidden replacing
an object that belongs to some other extension; only the behavior for
previously-free-standing objects changes here.)
For the same reason, also fail CREATE IF NOT EXISTS when there is
an existing object that doesn't belong to the extension.
Our thanks to Sven Klemm for reporting this problem.
Security: CVE-2022-2625
Commit 59be1c942a already tried to make
src/test/recovery/t/033_replay_tsp_drops more reliable, but it wasn't
enough. Try to improve on that by making this use of a replication slot
to be more like others. Also, don't drop the slot.
Make a few other stylistic changes while at it. It's still quite slow,
which is another thing that we need to fix in this script.
Backpatch to all supported branches.
Discussion: https://postgr.es/m/349302.1659191875@sss.pgh.pa.us
Since v14, the extended stats machinery will try to estimate for
otherwise-unsupported boolean expressions if they match an expression
available from an extended stats object. mcv.c did not get the memo
about this, and would spit up with "unknown clause type". Fortunately
the case is easy to handle, since we can expect the expression yields
boolean.
While here, replace some not-terribly-on-point assertions with
simpler runtime tests for lookup failure. That seems appropriate
so that we get an elog not a crash if we somehow get to the new
it-should-be-a-bool-expression code with a subexpression that
doesn't match any stats column.
Per report from Danny Shemesh. Thanks to Justin Pryzby for
preliminary investigation.
Discussion: https://postgr.es/m/CAFZC=QqD6=27wQPOW1pbRa98KPyuyn+7cL_Ay_Ck-roZV84vHg@mail.gmail.com
statext_is_compatible_clause_internal() checked that the arguments
of a ScalarArrayOpExpr are one Var and one Const, but it would allow
cases where the Const was on the left. Subsequent uses of the clause
are not expecting that and would suffer assertion failures or core
dumps. mcv.c also had not bothered to cope with the case of a NULL
array constant, which seems really unacceptably sloppy of somebody.
(Although our tools failed us there too, since AFAIK neither Coverity
nor any compiler warned of the obvious use-of-uninitialized-variable
condition.) It seems best to handle that by having
statext_is_compatible_clause_internal() reject it.
Noted while fixing bug #17570. Back-patch to v13 where the
extended stats code grew some awareness of ScalarArrayOpExpr.
Commit a4d75c86b improved the extended-stats logic to allow extended
stats to be collected on expressions not just bare Vars. To apply
such stats, we first verify that the user has permissions to read all
columns used in the stats. (If not, the query will likely fail at
runtime, but the planner ought not do so.) That had to get extended
to check permissions of columns appearing within such expressions,
but the code for that was completely wrong: it applied pull_varattnos
to the wrong pointer, leading to "unrecognized node type" failures.
Furthermore, although you couldn't get to this because of that bug,
it failed to account for the attnum offset applied by pull_varattnos.
This escaped recognition so far because the code in question is not
reached when the user has whole-table SELECT privilege (which is the
common case), and because only subexpressions not specially handled
by statext_is_compatible_clause_internal() are at risk.
I think a large part of the reason for this bug is under-documentation
of what statext_is_compatible_clause() is doing and what its arguments
are, so do some work on the comments to try to improve that.
Per bug #17570 from Alexander Kozhemyakin. Patch by Richard Guo;
comments and other cosmetic improvements by me. (Thanks also to
Japin Li for diagnosis.) Back-patch to v14 where the bug came in.
Discussion: https://postgr.es/m/17570-f2f2e0f4bccf0965@postgresql.org
Having additional triggers in a test table made the ORDER BY clauses in
old queries underspecified. Add another column there for stability.
Per sporadic buildfarm pink.
Using ATSimpleRecursion() in ATPrepCmd() to do so as bbb927b4db did is
not correct, because ATPrepCmd() can't distinguish between triggers that
may be cloned and those that may not, so would wrongly try to recurse
for the latter category of triggers.
So this commit restores the code in EnableDisableTrigger() that
86f575948c had added to do the recursion, which would do it only for
triggers that may be cloned, that is, row-level triggers. This also
changes tablecmds.c such that ATExecCmd() is able to pass the value of
ONLY flag down to EnableDisableTrigger() using its new 'recurse'
parameter.
This also fixes what seems like an oversight of 86f575948c that the
recursion to partition triggers would only occur if EnableDisableTrigger()
had actually changed the trigger. It is more apt to recurse to inspect
partition triggers even if the parent's trigger didn't need to be
changed: only then can we be certain that all descendants share the same
state afterwards.
Backpatch all the way back to 11, like bbb927b4db. Care is taken not
to break ABI compatibility (and that no catversion bump is needed.)
Co-authored-by: Amit Langote <amitlangote09@gmail.com>
Reviewed-by: Dmitry Koval <d.koval@postgrespro.ru>
Discussion: https://postgr.es/m/CA+HiwqG-cZT3XzGAnEgZQLoQbyfJApVwOTQaCaas1mhpf+4V5A@mail.gmail.com
Adjusting this function was overlooked in commit 94aa7cc5f. The only
visible symptom (so far) is that INSERT ... ON CONFLICT could go into
an endless loop when inserting a null that has a conflict.
Richard Guo and Tom Lane, per bug #17558 from Andrew Kesper
Discussion: https://postgr.es/m/17558-3f6599ffcf52fd4a@postgresql.org
Remove the test case added by commit fac1b470a, which never actually
worked to expose the problem it claimed to test. Replace it with
a case that does expose the problem, and also covers the SRF-not-
at-the-top deficiency repaired in 1aa8dad41.
Richard Guo, with some editorialization by me
Discussion: https://postgr.es/m/17564-c7472c2f90ef2da3@postgresql.org
The sto_using_cursor and sto_using_select tests were coded to exercise
every permutation of their test steps, but AFAICS there is no value in
exercising more than one. This matters because each permutation costs
about six seconds, thanks to the "pg_sleep(6)". Perhaps we could
reduce that, but the useless permutations seem worth getting rid of
in any case. (Note that sto_using_hash_index got it right already.)
While here, clean up some other sloppiness such as an unused table.
This doesn't make too much difference in interactive testing, since the
wasted time is typically masked by parallelization with other tests.
However, the buildfarm runs this as a serial step, which means we can
expect to shave ~40 seconds from every buildfarm run. That makes it
worth back-patching.
Discussion: https://postgr.es/m/2515192.1659454702@sss.pgh.pa.us
Previously, a byte with the high bit set was just transmitted
as-is by charin() and charout(). This is problematic if the
database encoding is multibyte, because the result of charout()
won't be validly encoded, which breaks various stuff that
expects all text strings to be validly encoded. We've
previously decided to enforce encoding validity rather than try
to individually harden each place that might have a problem with
such strings, so it's time to do something about "char".
To fix, represent high-bit-set characters as \ooo (backslash
and three octal digits), following the ancient "escape" format
for bytea. charin() will continue to accept the old way as well,
though that is only reachable in single-byte encodings.
Add some test cases just so there is coverage for this code.
We'll otherwise leave this question undocumented as it was before,
because we don't really want to encourage end-user use of "char".
For the moment, back-patch into v15 so that this change appears
in 15beta3. If there's not great pushback we should consider
absorbing this change into the older branches.
Discussion: https://postgr.es/m/2318797.1638558730@sss.pgh.pa.us
In the short time this function has existed, it's already proven to be
a nontrivial maintenance burden, since it has to be updated whenever a
node tag is added or removed. Although in principle we could now
automate that, I see little justification for having such functionality
here at all. The function is only being applied to utility statements,
for which we already have infrastructure for obtaining string names.
Moreover, that infrastructure produces already-familiar-to-users names,
unlike nodetag_to_string().
So, remove this function and use the existing infrastructure instead.
That saves over a thousand lines of largely-unreachable code.
Back-patch to v15 where this code came in. Although it seems unlikely
that v15's nodetag list will change anymore, we might as well keep the
two branches looking and acting alike; otherwise back-patching any
test-results changes in this area will be painful.
Discussion: https://postgr.es/m/843818.1659218928@sss.pgh.pa.us
The code tried to access ARR_DIMS(v)[0] and ARR_LBOUND(v)[0]
whether or not those values exist. This made the range check
on the "n" argument unstable --- it might or might not fail, and
if it did it would report garbage for the allowed upper limit.
These bogus accesses would probably annoy Valgrind, and if you
were very unlucky even lead to SIGSEGV.
Report and fix by Martin Kalcher. Back-patch to v14 where this
function was added.
Discussion: https://postgr.es/m/baaeb413-b8a8-4656-5757-ef347e5ec11f@aboutsource.net
The new test is from commit 9e4f914b5e.
With this setting messages have SQL error numbers included, so that
needs to be provided for in the pattern looked for.
Backpatch to all live branches like the original.
On FreeBSD, the new test fails due to a WAL file being removed before
the standby has had the chance to copy it. Fix by adding a replication
slot to prevent the removal until after the standby has connected.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reported-by: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/CAEze2Wj5nau_qpjbwihvmXLfkAWOZ5TKdbnqOc6nKSiRJEoPyQ@mail.gmail.com
Crash recovery on standby may encounter missing directories
when replaying database-creation WAL records. Prior to this
patch, the standby would fail to recover in such a case;
however, the directories could be legitimately missing.
Consider the following sequence of commands:
CREATE DATABASE
DROP DATABASE
DROP TABLESPACE
If, after replaying the last WAL record and removing the
tablespace directory, the standby crashes and has to replay the
create database record again, crash recovery must be able to continue.
A fix for this problem was already attempted in 49d9cfc68b, but it
was reverted because of design issues. This new version is based
on Robert Haas' proposal: any missing tablespaces are created
during recovery before reaching consistency. Tablespaces
are created as real directories, and should be deleted
by later replay. CheckRecoveryConsistency ensures
they have disappeared.
The problems detected by this new code are reported as PANIC,
except when allow_in_place_tablespaces is set to ON, in which
case they are WARNING. Apart from making tests possible, this
gives users an escape hatch in case things don't go as planned.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Asim R Praveen <apraveen@pivotal.io>
Author: Paul Guo <paulguo@gmail.com>
Reviewed-by: Anastasia Lubennikova <lubennikovaav@gmail.com> (older versions)
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com> (older versions)
Reviewed-by: Michaël Paquier <michael@paquier.xyz>
Diagnosed-by: Paul Guo <paulguo@gmail.com>
Discussion: https://postgr.es/m/CAEET0ZGx9AvioViLf7nbR_8tH9-=27DN5xWJ2P9-ROH16e4JUA@mail.gmail.com
Commit e2f65f425 added contrib/pg_prewarm to the prerequisites for
running the src/test/recovery suite, but did not bother to update
the documentation about that.
The dependency logic failed to register a column-level dependency
when a view or rule contains a reference to a specific column of
the result of a function-returning-composite. That meant you could
drop the column from the composite type, causing trouble for future
executions of the view. We've known about this for years, but never
summoned the energy to actually fix it, instead installing various
low-level defenses to prevent crashing on references to dropped columns.
We had to do that to plug the hole in stable branches, where there might
be pre-existing broken references; but let's fix the root cause today.
To do that, add some logic (borrowed from get_rte_attribute_is_dropped)
to find_expr_references_walker, to check whether a Var referencing an
RTE_FUNCTION RTE is referencing a column of a composite type, and if
so add the proper dependency.
However ... it seems mighty unwise to remove said low-level defenses,
since there could be other bugs now or in the future that allow
reaching them. By the same token, letting those defenses go untested
seems unwise. Hence, rather than just dropping the associated test
cases, hack them to continue working by the expedient of manually
dropping the pg_depend entries that this fix installs.
Back-patch into v15. I don't want to risk changing this behavior
in stable branches, but it seems not too late for v15. (Since
we have already forced initdb for beta3, we can be sure that all
production v15 installations will have these added dependencies.)
Discussion: https://postgr.es/m/182492.1658431155@sss.pgh.pa.us
Due to lack of concern for the case in the dependency code, it's
possible to drop a column of a composite type even though stored
queries have references to the dropped column via functions-in-FROM
that return the composite type. There are "soft" references,
namely FROM-clause aliases for such columns, and "hard" references,
that is actual Vars referring to them. The right fix for hard
references is to add dependencies preventing the drop; something
we've known for many years and not done (and this commit still doesn't
address it). A "soft" reference shouldn't prevent a drop though.
We've been around on this before (cf. 9b35ddce9, 2c4debbd0), but
nobody had noticed that the current behavior can result in dump/reload
failures, because ruleutils.c can print more column aliases than the
underlying composite type now has. So we need to rejigger the
column-alias-handling code to treat such columns as dropped and not
print aliases for them.
Rather than writing new code for this, I used expandRTE() which already
knows how to figure out which function result columns are dropped.
I'd initially thought maybe we could use expandRTE() in all cases, but
that fails for EXPLAIN's purposes, because the planner strips a lot of
RTE infrastructure that expandRTE() needs. So this patch just uses it
for unplanned function RTEs and otherwise does things the old way.
If there is a hard reference (Var), then removing the column alias
causes us to fail to print the Var, since there's no longer a name
to print. Failing seems less desirable than printing a made-up
name, so I made it print "?dropped?column?" instead.
Per report from Timo Stolz. Back-patch to all supported branches.
Discussion: https://postgr.es/m/5c91267e-3b6d-5795-189c-d15a55d61dbb@nullachtvierzehn.de
Detail and hint messages should be full sentences and should end with a
period, but some of the messages newly-introduced in v15 did not follow
that.
Author: Justin Pryzby
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/20220719120948.GF12702@telsasoft.com
Backpatch-through: 15
We allow users to set the values of not-yet-loaded extension GUCs,
remembering those values in "placeholder" GUC entries. When/if
the extension is loaded later in the session, we need to verify that
the user had permissions to set the GUC. That was done correctly
before commit a0ffa885e, but as of that commit, we'd check the
permissions of the active role when the LOAD happens, not the role
that had set the value. (This'd be a security bug if it had made it
into a released version.)
In principle this is simple enough to fix: we just need to remember
the exact role OID that set each GUC value, and use that not
GetUserID() when verifying permissions. Maintaining that data in
the guc.c data structures is slightly tedious, but fortunately it's
all basically just copy-n-paste of the logic for tracking the
GucSource of each setting, as we were already doing.
Another oversight is that validate_option_array_item() hadn't
been taught to check for granted GUC privileges. This appears
to manifest only in that ALTER ROLE/DATABASE RESET ALL will
fail to reset settings that the user should be allowed to reset.
Patch by myself and Nathan Bossart, per report from Nathan Bossart.
Back-patch to v15 where the faulty code came in.
Discussion: https://postgr.es/m/20220706224727.GA2158260@nathanxps13
This addresses two issues in the tests of test_oat_hooks:
- The role regress_test_user was being left behind, preventing the test
to succeed on repeated runs. It makes sense to leave some objects
behind to have more coverage for pg_upgrade (as does test_pg_dump), but
the role dropped here does not own any objects so there is no reason to
keep it.
- GRANT SET ON PARAMETER is issued, creating an entry in
pg_parameter_acl without cleaning up the entry created. This causes
an overlap with unsafe_tests as both use work_mem, making the latter
fail. This commit adds an extra REVOKE SET ON PARAMETER to clean the
contents of pg_parameter_acl, switching to maintenance_work_mem rather
than work_mem to avoid an overlap between both tests.
The tests of test_oat_hooks cannot use installcheck yet as these are
proving to be unstable with caching and the namespace search hooks, so
the issues fixed here cannot be reached yet, but they would be once the
hook issue is addressed and installcheck is allowed again in
test_oat_hooks.
Discussion: https://postgr.es/m/YrpVkADAY0knF6vM@paquier.xyz
Backpatch-through: 15
These are documented to be the allowed types for the RETURNING clause,
but the restriction was not being enforced, which caused a segfault if
another type was specified. Add some testing for this.
Per report from a.kozhemyakin
Backpatch to release 15.
When locking a specific named relation for a FOR [KEY] UPDATE/SHARE
clause, transformLockingClause() finds the relation to lock by
scanning the rangetable for an RTE with a matching eref->aliasname.
However, it failed to account for the visibility rules of a join RTE.
If a join RTE doesn't have a user-supplied alias, it will have a
generated eref->aliasname of "unnamed_join" that is not visible as a
relation name in the parse namespace. Such an RTE needs to be skipped,
otherwise it might be found in preference to a regular base relation
with a user-supplied alias of "unnamed_join", preventing it from being
locked.
In addition, if a join RTE doesn't have a user-supplied alias, but
does have a join_using_alias, then the RTE needs to be matched using
that alias rather than the generated eref->aliasname, otherwise a
misleading "relation not found" error will be reported rather than a
"join cannot be locked" error.
Backpatch all the way, except for the second part which only goes back
to 14, where JOIN USING aliases were added.
Dean Rasheed, reviewed by Tom Lane.
Discussion: https://postgr.es/m/CAEZATCUY_KOBnqxbTSPf=7fz9HWPnZ5Xgb9SwYzZ8rFXe7nb=w@mail.gmail.com
