The operators for array_eq, record_eq, range_eq, and multirange_eq
are all marked oprcanhash, but there's a pitfall: their hash functions
can fail at runtime if the contained type(s) are not hashable.
Therefore, the planner has to check hashability of the contained types
before deciding it can use hashing in these cases. Not every place
had gotten this memo, and noplace at all had considered the issue
for ranges or multiranges. In particular we could attempt to use
hashing for a ScalarArrayOpExpr on a container type when it won't
actually work, leading to "could not identify a hash function ..."
runtime failures.
For the most part we should fix this in the lookup functions provided
by lsyscache.c, to wit get_op_hash_functions and op_hashjoinable.
But there's a problem: get_op_hash_functions is not passed the input
data type it would need to check. We mustn't change the API of that
exported function in a back-patched fix, and even if we wanted to,
its call sites in the executor mostly don't have easy access to the
required data type OID. Fortunately, the executor call sites don't
actually need fixing, because it's expected that the planner verified
hashability before building a plan that requires it. Therefore,
leave get_op_hash_functions as-is and invent a wrapper function
get_op_hash_functions_ext that does the additional checking needed
in the planner's uses.
We also need to fix hash_ok_operator (extending the fix in 647889667).
While at it, neaten up a couple of places in lookup_type_cache where
relevant code for multirange cases was written differently from the
code for other container types.
Note: while this touches pg_operator.dat, it's only to add oid_symbol
macros. So there's no on-disk data change and no need for a
catversion bump.
Reported-by: Andrei Lepikhov <lepihov@gmail.com>
Author: Andrei Lepikhov <lepihov@gmail.com>
Co-authored-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/ed221f95-f09b-4a9c-b05b-e1fed621ec87@gmail.com
Backpatch-through: 14
pg_rewind and pg_basebackup could be fed paths from rogue endpoints that
could overwrite the contents of the client when received, achieving path
traversal.
There were two areas in the tree that were sensitive to this problem:
- pg_basebackup, through the astreamer code, where no validation was
performed before building an output path when streaming tar data. This
is an issue in v15 and newer versions.
- pg_rewind file operations for paths received through libpq, for all
the stable branches supported.
In order to address this problem, this commit adds a helper function in
path.c, that reuses path_is_relative_and_below_cwd() after applying
canonicalize_path(). This can be used to validate the paths received
from a connection point. A path is considered invalid if any of the two
following conditions is satisfied:
- The path is absolute.
- The path includes a direct parent-directory reference.
Reported-by: XlabAI Team of Tencent Xuanwu Lab
Reported-by: Valery Gubanov <valerygubanov95@gmail.com>
Author: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Backpatch-through: 14
Security: CVE-2026-6475
timingsafe_bcmp() should be used instead of memcmp() or a naive
for-loop, when comparing passwords or secret tokens, to avoid leaking
information about the secret token by timing. This commit just
introduces the function but does not change any existing code to use
it yet.
This has been initially applied as of 09be391126 in v18 and newer
versions, and will be used in all the stable branches for an upcoming
fix.
Co-authored-by: Jelte Fennema-Nio <github-tech@jeltef.nl>
Discussion: https://www.postgresql.org/message-id/7b86da3b-9356-4e50-aa1b-56570825e234@iki.fi
Security: CVE-2026-6478
Backpatch-through: 14
Define MaxAllocSize in src/include/common/fe_memutils.h rather
than having several copies of it in different src/common/*.c files.
This also provides an opportunity to document it better.
Back-patch of commit 11b7de4a7, needed now because assorted security
fixes are adding additional references to MaxAllocSize in frontend
code.
Backpatch-through: 14-17
Security: CVE-2026-6473
The number of NFA states, number of NFA arcs, and number of colors
are all bounded to reasonably small values. However, there are
places where we try to allocate arrays sized by products of those
quantities, and those calculations could overflow, enabling
buffer-overrun attacks. In practice there's no problem on 64-bit
machines, but there are some live scenarios on 32-bit machines.
A related problem is that citerdissect() and creviterdissect()
allocate arrays based on the length of the input string, which
potentially could overflow.
To fix, invent MALLOC_ARRAY and REALLOC_ARRAY macros that rely on
palloc_array_extended and repalloc_array_extended with the NO_OOM
option, similarly to the existing MALLOC and REALLOC macros.
(Like those, they'll throw an error not return a NULL result for
oversize requests. This doesn't really fit into the regex code's
view of error handling, but it'll do for now. We can consider
whether to change that behavior in a non-security follow-up patch.)
I installed similar defenses in the colormap construction code.
It's not entirely clear whether integer overflow is possible
there, but analyzing the behavior in detail seems not worth
the trouble, as the risky spots are not in hot code paths.
I left a bunch of calls as-is after verifying that they can't
overflow given reasonable limits on nstates and narcs. Those
limits were enforced already via REG_MAX_COMPILE_SPACE, but
add commentary to document the interactions.
In passing, also fix a related edge case, which is that the
special color numbers used in LACON carcs could overflow the
"color" data type, if ncolors is close to MAX_COLOR.
In v14 and v15, the regex engine calls malloc() directly instead
of using palloc(), so MALLOC_ARRAY and REALLOC_ARRAY do likewise.
Reported-by: Xint Code
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Backpatch-through: 14
Security: CVE-2026-6473
Sufficiently large "count" arguments could result in undetected
overflow, causing the allocated memory chunk to be much smaller
than what the caller will subsequently write into it. This is
unlikely to be a hazard with 64-bit size_t but can sometimes
happen on 32-bit builds, primarily where a function allocates
workspace that's significantly larger than its input data.
Rather than trying to patch the at-risk callers piecemeal,
let's just redefine these macros so that they always check.
To do that, move the longstanding add_size() and mul_size() functions
into palloc.h and mcxt.c, and adjust them to not be specific to
shared-memory allocation. Then invent palloc_mul(), palloc0_mul(),
palloc_mul_extended() to use these functions. Actually, the latter
use inlined copies to save one function call. repalloc_array() gets
similar treatment. I didn't bother trying to inline the calls for
repalloc0_array() though.
In v14 and v15, this also adds repalloc_extended(), which previously
was only available in v16 and up.
We need copies of all this in fe_memutils.[hc] as well, since that
module also provides palloc_array() etc.
Reported-by: Xint Code
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Backpatch-through: 14
Security: CVE-2026-6473
Commit 600086f47 added (several bespoke copies of) size_t addition with
overflow checks to libpq. Move this to common/int.h, along with
its subtraction and multiplication counterparts.
pg_neg_size_overflow() is intentionally omitted; I'm not sure we should
add SSIZE_MAX to win32_port.h for the sake of a function with no
callers.
Back-patch of commit 8934f2136, done now because pg_add_size_overflow()
and friends are needed more widely for security fixes.
Author: Jacob Champion <jacob.champion@enterprisedb.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CAOYmi%2B%3D%2BpqUd2MUitvgW1pAJuXgG_TKCVc3_Ek7pe8z9nkf%2BAg%40mail.gmail.com
Backpatch-through: 14-18
Security: CVE-2026-6473
relation_has_unique_index_for() has long had an XXX noting that it
doesn't check collations when matching a unique index's columns
against equality clauses. This was benign as long as all collations
in play reduced to the same notion of equality, but has been incorrect
since nondeterministic collations were introduced in PG 12: a unique
index under a deterministic collation does not prove uniqueness under
a nondeterministic collation, nor vice versa.
The consequence is wrong query results for any planner optimization
that consumes the faulty proof, including inner-unique join execution
(which stops the inner search after the first match per outer row),
useless-left-join removal, semijoin-to-innerjoin reduction, and
self-join elimination.
Fix by requiring the index's collation to agree on equality with the
clause's input collation. Two collations agree on equality if either
is InvalidOid (denoting a non-collation-sensitive operation, which
cannot conflict with the other side), if they have the same OID, or if
both are deterministic: by definition a deterministic collation treats
two strings as equal iff they are byte-wise equal (see CREATE
COLLATION), so any two deterministic collations share the same
equality relation and the uniqueness proof carries over. Any mismatch
involving a nondeterministic collation is rejected.
Back-patch to all supported branches; the bug has existed since
nondeterministic collations were introduced in PG 12.
Author: Richard Guo <guofenglinux@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAMbWs4_XUUSTyzCaRjUeeahWNqi=8ZOA5Q4coi8zUVEDSBkM6A@mail.gmail.com
Backpatch-through: 14
ExecEvalHashedScalarArrayOp(), when using a strict equality function,
performs a short-circuit when looking up NULL values. When the function
is non-strict, the code incorrectly looked up the hash table for a
zero-valued Datum, which could have resulted in an accidental true
return if the hash table contained zero valued Datum, or could result
in a crash for non-byval types.
Here we fix this by adding an extra step when we build the hash table to
check what the result of a NULL lookup would be. This requires looping
over the array and checking what the non-hashed version of the code
would do. We cache the results of that in the expression so that we can
reuse the result any time we're asked to search for a NULL value.
It's important to note that non-strict equality functions are free to
treat any NULL value as equal to any non-NULL value. For example,
someone may wish to design a type that treats an empty string and NULL
as equal.
All built-in types have strict equality functions, so this could affect
custom / user-defined types.
Author: Chengpeng Yan <chengpeng_yan@outlook.com>
Author: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: ChangAo Chen <cca5507@qq.com>
Discussion: https://postgr.es/m/A16187AE-2359-4265-9F5E-71D015EC2B2D@outlook.com
Backpatch-through: 14
drongo has been failing build in the v14 branch since 67d318e70:
regress.obj : error LNK2001: unresolved external symbol PGLZ_strategy_always [C:\\prog\\bf\\root\\REL_14_STABLE\\pgsql.build\\regress.vcxproj]
This is evidently because PGLZ_strategy_always was not marked
PGDLLIMPORT in that branch. Back-patch the relevant part of
8ec569479. (Maybe we should back-patch more of it, but I'm
content to just touch this one file.)
LLVM 22 has the fix that we copied into our tree in commit 9044fc1d and
a new function to reach it[1][2], so we only need to use our copy for
Aarch64 + LLVM < 22. The only change to the final version that our copy
didn't get is a new LLVM_ABI macro, but that isn't appropriate for us.
Our copy is hopefully now frozen and would only need maintenance if bugs
are found in the upstream code.
Non-Aarch64 systems now also use the new API with LLVM 22. It allocates
all sections with one contiguous mmap() instead of one per
section. We could have done that earlier, but commit 9044fc1d wanted to
limit the blast radius to the affected systems. We might as well
benefit from that small improvement everywhere now that it is available
out of the box.
We can't delete our copy until LLVM 22 is our minimum supported version,
or we switch to the newer JITLink API for at least Aarch64.
[1] https://github.com/llvm/llvm-project/pull/71968
[2] https://github.com/llvm/llvm-project/pull/174307
Backpatch-through: 14
Discussion: https://postgr.es/m/CA%2BhUKGJTumad75o8Zao-LFseEbt%3DenbUFCM7LZVV%3Dc8yg2i7dg%40mail.gmail.com
If a CHECKPOINT record with nextMulti N is written to the WAL before
the CREATE_ID record for N, and N happens to be the first multixid on
an offset page, the backwards compatibility logic to tolerate WAL
generated by older minor versions (before commit 789d65364c) failed to
compensate for the missing XLOG_MULTIXACT_ZERO_OFF_PAGE record. In
that case, the latest_page_number was initialized at the start of WAL
replay to the page for nextMulti from the CHECKPOINT record, even if
we had not seen the CREATE_ID record for that multixid yet, which
fooled the backwards compatibility logic to think that the page was
already initialized.
To fix, track the last XLOG_MULTIXACT_ZERO_OFF_PAGE that we've seen
separately from latest_page_number. If we haven't seen any
XLOG_MULTIXACT_ZERO_OFF_PAGE records yet, use
SimpleLruDoesPhysicalPageExist() to check if the page needs to be
initialized.
Reported-by: duankunren.dkr <duankunren.dkr@alibaba-inc.com>
Analyzed-by: duankunren.dkr <duankunren.dkr@alibaba-inc.com>
Reviewed-by: Andrey Borodin <x4mmm@yandex-team.ru>
Reviewed-by: Kirill Reshke <reshkekirill@gmail.com>
Discussion: https://www.postgresql.org/message-id/c4ef1737-8cba-458e-b6fd-4e2d6011e985.duankunren.dkr@alibaba-inc.com
Backpatch-through: 14-18
The function used GetXLogInsertRecPtr() to generate the fake LSN. Most
of the time this is the same as what XLogInsert() would return, and so
it works fine with the XLogFlush() call. But if the last record ends at
a page boundary, GetXLogInsertRecPtr() returns LSN pointing after the
page header. In such case XLogFlush() fails with errors like this:
ERROR: xlog flush request 0/01BD2018 is not satisfied --- flushed only to 0/01BD2000
Such failures are very hard to trigger, particularly outside aggressive
test scenarios.
Fixed by introducing GetXLogInsertEndRecPtr(), returning the correct LSN
without skipping the header. This is the same as GetXLogInsertRecPtr(),
except that it calls XLogBytePosToEndRecPtr().
Initial investigation by me, root cause identified by Andres Freund.
This is a long-standing bug in gistGetFakeLSN(), probably introduced by
c6b92041d3 in PG13. Backpatch to all supported versions.
Reported-by: Peter Geoghegan <pg@bowt.ie>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/vf4hbwrotvhbgcnknrqmfbqlu75oyjkmausvy66ic7x7vuhafx@e4rvwavtjswo
Backpatch-through: 14
Although clang claims to be compatible with gcc's printf format
archetypes, this appears to be a falsehood: it likes __syslog__
(which gcc does not, on most platforms) and doesn't accept
gnu_printf. This means that if you try to use gcc with clang++
or clang with g++, you get compiler warnings when compiling
printf-like calls in our C++ code. This has been true for quite
awhile, but it's gotten more annoying with the recent appearance
of several buildfarm members that are configured like this.
To fix, run separate probes for the format archetype to use with the
C and C++ compilers, and conditionally define PG_PRINTF_ATTRIBUTE
depending on __cplusplus.
(We could alternatively insist that you not mix-and-match C and
C++ compilers; but if the case works otherwise, this is a poor
reason to insist on that.)
This commit back-patches 0909380e4 into supported branches.
Discussion: https://postgr.es/m/986485.1764825548@sss.pgh.pa.us
Discussion: https://postgr.es/m/3988414.1771950285@sss.pgh.pa.us
Backpatch-through: 14-18
'latest_page_number' is set to the correct value, according to
nextOffset, early at system startup. Contrary to the comment, it hence
should be set up correctly by the time we get to WAL replay.
This fixes a failure to replay WAL generated on older minor versions,
before commit 789d65364c (18.2, 17.8, 16.12, 15.16, 14.21). The
failure occurs after a truncation record has been replayed and looks
like this:
FATAL: could not access status of transaction 858112
DETAIL: Could not read from file "pg_multixact/offsets/000D" at offset 24576: read too few bytes.
CONTEXT: WAL redo at 3/2A3AB408 for MultiXact/CREATE_ID: 858111 offset 6695072 nmembers 5: 1048228 (sh) 1048271 (keysh) 1048316 (sh) 1048344 (keysh) 1048370 (sh)
Reported-by: Sebastian Webber <sebastian@swebber.me>
Reviewed-by: Andrey Borodin <x4mmm@yandex-team.ru>
Reviewed-by: Kirill Reshke <reshkekirill@gmail.com>
Discussion: https://www.postgresql.org/message-id/20260214090150.GC2297@p46.dedyn.io;lightning.p46.dedyn.io
Backpatch-through: 14-18
While the preceding commit prevented such attachments from occurring
in future, this one aims to prevent further abuse of any already-
created operator that exposes _int_matchsel to the wrong data types.
(No other contrib module has a vulnerable selectivity estimator.)
We need only check that the Const we've found in the query is indeed
of the type we expect (query_int), but there's a difficulty: as an
extension type, query_int doesn't have a fixed OID that we could
hard-code into the estimator.
Therefore, the bulk of this patch consists of infrastructure to let
an extension function securely look up the OID of a datatype
belonging to the same extension. (Extension authors have requested
such functionality before, so we anticipate that this code will
have additional non-security uses, and may soon be extended to allow
looking up other kinds of SQL objects.)
This is done by first finding the extension that owns the calling
function (there can be only one), and then thumbing through the
objects owned by that extension to find a type that has the desired
name. This is relatively expensive, especially for large extensions,
so a simple cache is put in front of these lookups.
Reported-by: Daniel Firer as part of zeroday.cloud
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Noah Misch <noah@leadboat.com>
Security: CVE-2026-2004
Backpatch-through: 14
An upcoming patch requires this cache so that it can track updates
in the pg_extension catalog. So far though, the EXTENSIONOID cache
only exists in v18 and up (see 490f869d9). We can add it in older
branches without an ABI break, if we are careful not to disturb the
numbering of existing syscache IDs.
In v16 and before, that just requires adding the new ID at the end
of the hand-assigned enum list, ignoring our convention about
alphabetizing the IDs. But in v17, genbki.pl enforces alphabetical
order of the IDs listed in MAKE_SYSCACHE macros. We can fake it
out by calling the new cache ZEXTENSIONOID.
Note that adding a syscache does change the required contents of the
relcache init file (pg_internal.init). But that isn't problematic
since we blow those away at postmaster start for other reasons.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Noah Misch <noah@leadboat.com>
Security: CVE-2026-2004
Backpatch-through: 14-17
These data types are represented like full-fledged arrays, but
functions that deal specifically with these types assume that the
array is 1-dimensional and contains no nulls. However, there are
cast pathways that allow general oid[] or int2[] arrays to be cast
to these types, allowing these expectations to be violated. This
can be exploited to cause server memory disclosure or SIGSEGV.
Fix by installing explicit checks in functions that accept these
types.
Reported-by: Altan Birler <altan.birler@tum.de>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Noah Misch <noah@leadboat.com>
Security: CVE-2026-2003
Backpatch-through: 14
A security patch changed them today, so close the coverage gap now.
Test that buffer overrun is avoided when pg_mblen*() requires more
than the number of bytes remaining.
This does not cover the calls in dict_thesaurus.c or in dict_synonym.c.
That code is straightforward. To change that code's input, one must
have access to modify installed OS files, so low-privilege users are not
a threat. Testing this would likewise require changing installed
share/postgresql/tsearch_data, which was enough of an obstacle to not
bother.
Security: CVE-2026-2006
Backpatch-through: 14
Co-authored-by: Thomas Munro <thomas.munro@gmail.com>
Co-authored-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
A corrupted string could cause code that iterates with pg_mblen() to
overrun its buffer. Fix, by converting all callers to one of the
following:
1. Callers with a null-terminated string now use pg_mblen_cstr(), which
raises an "illegal byte sequence" error if it finds a terminator in the
middle of the sequence.
2. Callers with a length or end pointer now use either
pg_mblen_with_len() or pg_mblen_range(), for the same effect, depending
on which of the two seems more convenient at each site.
3. A small number of cases pre-validate a string, and can use
pg_mblen_unbounded().
The traditional pg_mblen() function and COPYCHAR macro still exist for
backward compatibility, but are no longer used by core code and are
hereby deprecated. The same applies to the t_isXXX() functions.
Security: CVE-2026-2006
Backpatch-through: 14
Co-authored-by: Thomas Munro <thomas.munro@gmail.com>
Co-authored-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reported-by: Paul Gerste (as part of zeroday.cloud)
Reported-by: Moritz Sanft (as part of zeroday.cloud)
Commit 0bada39c83 fixed a bug of this kind,
which existed in all branches for six days before detection. While the
probability of reaching the trouble was low, the disruption was extreme. No
new backends could start, and service restoration needed an immediate
shutdown. Hence, add this to catch the next bug like it.
The new check in RelationIdGetRelation() suffices to make autovacuum detect
the bug in commit 243e9b40f1 that led to commit
0bada39. This also checks in a number of similar places. It replaces each
Assert(IsTransactionState()) that pertained to a conditional catalog read.
Back-patch to v14 - v17. This a back-patch of commit
f4ece891fc (from before v18 branched) to
all supported branches, to accompany the back-patch of commits 243e9b4
and 0bada39. For catalog indexes, the bttextcmp() behavior that
motivated IsCatalogTextUniqueIndexOid() was v18-specific. Hence, this
back-patch doesn't need that or its correction from commit
4a4ee0c2c1.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/20250410191830.0e.nmisch@google.com
Discussion: https://postgr.es/m/10ec0bc3-5933-1189-6bb8-5dec4114558e@gmail.com
Backpatch-through: 14-17
The inplace update survives ROLLBACK. The inval didn't, so another
backend's DDL could then update the row without incorporating the
inplace update. In the test this fixes, a mix of CREATE INDEX and ALTER
TABLE resulted in a table with an index, yet relhasindex=f. That is a
source of index corruption.
Back-patch to v14 - v17. This is a back-patch of commits:
- 243e9b40f1
(main change, on master, before v18 branched)
- 0bada39c83
(defect fix, on master, before v18 branched)
- bae8ca82fd
(cosmetics from post-commit review, on REL_18_STABLE)
It reverses commit c1099dd745, my revert
of the original back-patch of 243e9b4.
This back-patch omits the non-comment heap_decode() changes. I find
those changes removed harmless code that was last necessary in v13. See
discussion thread for details. The back branches aren't the place to
remove such code.
Like the original back-patch, this doesn't change WAL, because these
branches use end-of-recovery SIResetAll(). All branches change the ABI
of extern function PrepareToInvalidateCacheTuple(). No PGXN extension
calls that, and there's no apparent use case in extensions. Expect
".abi-compliance-history" edits to follow.
Reviewed-by: Paul A Jungwirth <pj@illuminatedcomputing.com>
Reviewed-by: Surya Poondla <s_poondla@apple.com>
Reviewed-by: Ilyasov Ian <ianilyasov@outlook.com>
Reviewed-by: Nitin Motiani <nitinmotiani@google.com> (in earlier versions)
Reviewed-by: Andres Freund <andres@anarazel.de> (in earlier versions)
Discussion: https://postgr.es/m/20240523000548.58.nmisch@google.com
Backpatch-through: 14-17
The comment incorrectly indicated that indexcollations[] stored
collations for both key columns and INCLUDE columns, but in reality it
only has elements for the key columns. canreturn[] didn't get a mention,
so add that while we're here.
Author: Junwang Zhao <zhjwpku@gmail.com>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAEG8a3LwbZgMKOQ9CmZarX5DEipKivdHp5PZMOO-riL0w%3DL%3D4A%40mail.gmail.com
Backpatch-through: 14
The async notification queue contains the XID of the sender, and when
processing notifications we call TransactionIdDidCommit() on the
XID. But we had no safeguards to prevent the CLOG segments containing
those XIDs from being truncated away. As a result, if a backend didn't
for some reason process its notifications for a long time, or when a
new backend issued LISTEN, you could get an error like:
test=# listen c21;
ERROR: 58P01: could not access status of transaction 14279685
DETAIL: Could not open file "pg_xact/000D": No such file or directory.
LOCATION: SlruReportIOError, slru.c:1087
To fix, make VACUUM "freeze" the XIDs in the async notification queue
before truncating the CLOG. Old XIDs are replaced with
FrozenTransactionId or InvalidTransactionId.
Note: This commit is not a full fix. A race condition remains, where a
backend is executing asyncQueueReadAllNotifications() and has just
made a local copy of an async SLRU page which contains old XIDs, while
vacuum concurrently truncates the CLOG covering those XIDs. When the
backend then calls TransactionIdDidCommit() on those XIDs from the
local copy, you still get the error. The next commit will fix that
remaining race condition.
This was first reported by Sergey Zhuravlev in 2021, with many other
people hitting the same issue later. Thanks to:
- Alexandra Wang, Daniil Davydov, Andrei Varashen and Jacques Combrink
for investigating and providing reproducable test cases,
- Matheus Alcantara and Arseniy Mukhin for review and earlier proposed
patches to fix this,
- Álvaro Herrera and Masahiko Sawada for reviews,
- Yura Sokolov aka funny-falcon for the idea of marking transactions
as committed in the notification queue, and
- Joel Jacobson for the final patch version. I hope I didn't forget
anyone.
Backpatch to all supported versions. I believe the bug goes back all
the way to commit d1e027221d, which introduced the SLRU-based async
notification queue.
Discussion: https://www.postgresql.org/message-id/16961-25f29f95b3604a8a@postgresql.org
Discussion: https://www.postgresql.org/message-id/18804-bccbbde5e77a68c2@postgresql.org
Discussion: https://www.postgresql.org/message-id/CAK98qZ3wZLE-RZJN_Y%2BTFjiTRPPFPBwNBpBi5K5CU8hUHkzDpw@mail.gmail.com
Backpatch-through: 14
This omission allowed table owners to create statistics in any
schema, potentially leading to unexpected naming conflicts. For
ALTER TABLE commands that require re-creating statistics objects,
skip this check in case the user has since lost CREATE on the
schema. The addition of a second parameter to CreateStatistics()
breaks ABI compatibility, but we are unaware of any impacted
third-party code.
Reported-by: Jelte Fennema-Nio <postgres@jeltef.nl>
Author: Jelte Fennema-Nio <postgres@jeltef.nl>
Co-authored-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Security: CVE-2025-12817
Backpatch-through: 13
generic-gcc.h maps our read and write barriers to C11 acquire and
release fences using compiler builtins, for platforms where we don't
have our own hand-rolled assembler. This is apparently enough for GCC,
but the C11 memory model is only defined in terms of atomic accesses,
and our barriers for non-atomic, non-volatile accesses were not always
respected under Clang's stricter interpretation of the standard.
This explains the occasional breakage observed on new RISC-V + Clang
animal greenfly in lock-free PgAioHandle manipulation code containing a
repeating pattern of loads and read barriers. The problem can also be
observed in code generated for MIPS and LoongAarch, though we aren't
currently testing those with Clang, and on x86, though we use our own
assembler there. The scariest aspect is that we use the generic version
on very common ARM systems, but it doesn't seem to reorder the relevant
code there (or we'd have debugged this long ago).
Fix by inserting an explicit compiler barrier. It expands to an empty
assembler block declared to have memory side-effects, so registers are
flushed and reordering is prevented. In those respects this is like the
architecture-specific assembler versions, but the compiler is still in
charge of generating the appropriate fence instruction. Done for write
barriers on principle, though concrete problems have only been observed
with read barriers.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Tested-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/d79691be-22bd-457d-9d90-18033b78c40a%40gmail.com
Backpatch-through: 13
XLogRecPtrIsInvalid() is inconsistent with the affirmative form of
macros used for other datatypes, and leads to awkward double negatives
in a few places. This commit introduces XLogRecPtrIsValid(), which
allows code to be written more naturally.
This patch only adds the new macro. XLogRecPtrIsInvalid() is left in
place, and all existing callers remain untouched. This means all
supported branches can accept hypothetical bug fixes that use the new
macro, and at the same time any code that compiled with the original
formulation will continue to silently compile just fine.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Backpatch-through: 13
Discussion: https://postgr.es/m/aQB7EvGqrbZXrMlg@ip-10-97-1-34.eu-west-3.compute.internal
The C standard says that the second and third arguments of a
conditional operator shall be both void type or both not-void
type. The Windows version of INTERRUPTS_PENDING_CONDITION()
got this wrong. It's pretty harmless because the result of
the operator is ignored anyway, but apparently recent versions
of MSVC have started issuing a warning about it. Silence the
warning by casting the dummy zero to void.
Reported-by: Christian Ullrich <chris@chrullrich.net>
Author: Bryan Green <dbryan.green@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/cc4ef8db-f8dc-4347-8a22-e7ebf44c0308@chrullrich.net
Backpatch-through: 13
Previously, if primary_slot_name was set to an invalid slot name and
the configuration file was reloaded, both the postmaster and all other
backend processes reported a WARNING. With many processes running,
this could produce a flood of duplicate messages. The problem was that
the GUC check hook for primary_slot_name reported errors at WARNING
level via ereport().
This commit changes the check hook to use GUC_check_errdetail() and
GUC_check_errhint() for error reporting. As with other GUC parameters,
this causes non-postmaster processes to log the message at DEBUG3,
so by default, only the postmaster's message appears in the log file.
Backpatch to all supported versions.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Chao Li <lic@highgo.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Discussion: https://postgr.es/m/CAHGQGwFud-cvthCTfusBfKHBS6Jj6kdAPTdLWKvP2qjUX6L_wA@mail.gmail.com
Backpatch-through: 13
log_error() would probably fail completely if used, and would
certainly print garbage for anything that needed to be interpolated
into the message, because it was failing to use the correct printing
subroutine for a va_list argument.
This bug likely went undetected because the error cases this code
is used for are rarely exercised - they only occur when Windows
security API calls fail catastrophically (out of memory, security
subsystem corruption, etc).
The FRONTEND variant can be fixed just by calling vfprintf()
instead of fprintf(). However, there was no va_list variant
of write_stderr(), so create one by refactoring that function.
Following the usual naming convention for such things, call
it vwrite_stderr().
Author: Bryan Green <dbryan.green@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAF+pBj8goe4fRmZ0V3Cs6eyWzYLvK+HvFLYEYWG=TzaM+tWPnw@mail.gmail.com
Backpatch-through: 13
hash_xlog.h included descriptions for the blocks used in WAL records
that were was not completely consistent with how the records are
generated, with one block missing for SQUEEZE_PAGE, and inconsistent
descriptions used for block 0 in VACUUM_ONE_PAGE and MOVE_PAGE_CONTENTS.
This information was incorrect since c11453ce0a, cross-checking the
logic for the record generation.
Author: Kirill Reshke <reshkekirill@gmail.com>
Reviewed-by: Andrey Borodin <x4mmm@yandex-team.ru>
Discussion: https://postgr.es/m/CALdSSPj1j=a1d1hVA3oabRFz0hSU3KKrYtZPijw4UPUM7LY9zw@mail.gmail.com
Backpatch-through: 13
If an INSERT has an ON CONFLICT DO UPDATE clause, the executor must
check that the target relation supports UPDATE as well as INSERT. In
particular, it must check that the target relation has a REPLICA
IDENTITY if it publishes updates. Formerly, it was not doing this
check, which could lead to silently breaking replication.
Fix by adding such a check to CheckValidResultRel(), which requires
adding a new onConflictAction argument. In back-branches, preserve ABI
compatibility by introducing a wrapper function with the original
signature.
Author: Zhijie Hou <houzj.fnst@fujitsu.com>
Reviewed-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Tested-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/OS3PR01MB57180C87E43A679A730482DF94B62@OS3PR01MB5718.jpnprd01.prod.outlook.com
Backpatch-through: 13
Commit c5b7ba4e6 changed things so that the ri_RootResultRelInfo field
of this struct is set for both partitions and inheritance children and
used for tuple routing and transition capture (before that commit, it
was only set for partitions to route tuples into), but failed to update
these comments.
Author: Etsuro Fujita <etsuro.fujita@gmail.com>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Discussion: https://postgr.es/m/CAPmGK14NF5CcdCmTZpxrvpvBiT0y4EqKikW1r_wAu1CEHeOmUA%40mail.gmail.com
Backpatch-through: 14
Commit e2d4ef8de8 (the fix for CVE-2017-7484) added security checks
to the selectivity estimation functions to prevent them from running
user-supplied operators on data obtained from pg_statistic if the user
lacks privileges to select from the underlying table. In cases
involving inheritance/partitioning, those checks were originally
performed against the child RTE (which for plain inheritance might
actually refer to the parent table). Commit 553d2ec271 then extended
that to also check the parent RTE, allowing access if the user had
permissions on either the parent or the child. It turns out, however,
that doing any checks using the child RTE is incorrect, since
securityQuals is set to NULL when creating an RTE for an inheritance
child (whether it refers to the parent table or the child table), and
therefore such checks do not correctly account for any RLS policies or
security barrier views. Therefore, do the security checks using only
the parent RTE. This is consistent with how RLS policies are applied,
and the executor's ACL checks, both of which use only the parent
table's permissions/policies. Similar checks are performed in the
extended stats code, so update that in the same way, centralizing all
the checks in a new function.
In addition, note that these checks by themselves are insufficient to
ensure that the user has access to the table's data because, in a
query that goes via a view, they only check that the view owner has
permissions on the underlying table, not that the current user has
permissions on the view itself. In the selectivity estimation
functions, there is no easy way to navigate from underlying tables to
views, so add permissions checks for all views mentioned in the query
to the planner startup code. If the user lacks permissions on a view,
a permissions error will now be reported at planner-startup, and the
selectivity estimation functions will not be run.
Checking view permissions at planner-startup in this way is a little
ugly, since the same checks will be repeated at executor-startup.
Longer-term, it might be better to move all the permissions checks
from the executor to the planner so that permissions errors can be
reported sooner, instead of creating a plan that won't ever be run.
However, such a change seems too far-reaching to be back-patched.
Back-patch to all supported versions. In v13, there is the added
complication that UPDATEs and DELETEs on inherited target tables are
planned using inheritance_planner(), which plans each inheritance
child table separately, so that the selectivity estimation functions
do not know that they are dealing with a child table accessed via its
parent. Handle that by checking access permissions on the top parent
table at planner-startup, in the same way as we do for views. Any
securityQuals on the top parent table are moved down to the child
tables by inheritance_planner(), so they continue to be checked by the
selectivity estimation functions.
Author: Dean Rasheed <dean.a.rasheed@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Noah Misch <noah@leadboat.com>
Backpatch-through: 13
Security: CVE-2025-8713
Commit 9e6104c66 disallowed transition tables on foreign tables, but
failed to account for cases where a foreign table is a child table of a
partitioned/inherited table on which transition tables exist, leading to
incorrect transition tuples collected from such foreign tables for
queries on the parent table triggering transition capture. This
occurred not only for inherited UPDATE/DELETE but for partitioned INSERT
later supported by commit 3d956d956, which should have handled it at
least for the INSERT case, but didn't.
To fix, modify ExecAR*Triggers to throw an error if the given relation
is a foreign table requesting transition capture. Also, this commit
fixes make_modifytable so that in case of an inherited UPDATE/DELETE
triggering transition capture, FDWs choose normal operations to modify
child foreign tables, not DirectModify; which is needed because they
would otherwise skip the calls to ExecAR*Triggers at execution, causing
unexpected behavior.
Author: Etsuro Fujita <etsuro.fujita@gmail.com>
Reviewed-by: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/CAPmGK14QJYikKzBDCe3jMbpGENnQ7popFmbEgm-XTNuk55oyHg%40mail.gmail.com
Backpatch-through: 13
Recent ICU versions have added U_SHOW_CPLUSPLUS_HEADER_API, and we need
to set this to zero as well to hide the ICU C++ APIs from pg_locale.h
Per discussion, we want cpluspluscheck to work cleanly in backbranches,
so backpatch both this and its predecessor commit ed26c4e25a to all
supported versions.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/1115793.1754414782%40sss.pgh.pa.us
Backpatch-through: 13
A deadlock can occur when the DDL command and the apply worker acquire
catalog locks in different orders while dropping replication origins.
The issue is rare in PG16 and higher branches because, in most cases, the
tablesync worker performs the origin drop in those branches, and its
locking sequence does not conflict with DDL operations.
This patch ensures consistent lock acquisition to prevent such deadlocks.
As per buildfarm.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Author: Ajin Cherian <itsajin@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: vignesh C <vignesh21@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Backpatch-through: 14, where it was introduced
Discussion: https://postgr.es/m/bab95e12-6cc5-4ebb-80a8-3e41956aa297@gmail.com
Solaris has never bothered to add "const" to the second argument
of PAM conversation procs, as all other Unixen did decades ago.
This resulted in an "incompatible pointer" compiler warning when
building --with-pam, but had no more serious effect than that,
so we never did anything about it. However, as of GCC 14 the
case is an error not warning by default.
To complicate matters, recent OpenIndiana (and maybe illumos
in general?) *does* supply the "const" by default, so we can't
just assume that platforms using our solaris template need help.
What we can do, short of building a configure-time probe,
is to make solaris.h #define _PAM_LEGACY_NONCONST, which
causes OpenIndiana's pam_appl.h to revert to the traditional
definition, and hopefully will have no effect anywhere else.
Then we can use that same symbol to control whether we include
"const" in the declaration of pam_passwd_conv_proc().
Bug: #18995
Reported-by: Andrew Watkins <awatkins1966@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/18995-82058da9ab4337a7@postgresql.org
Backpatch-through: 13
Commit 4909b38af0 introduced logic to distribute invalidation messages
from catalog-modifying transactions to all concurrent in-progress
transactions. However, since each transaction distributes not only its
original invalidation messages but also previously distributed
messages to other transactions, this leads to an exponential increase
in allocation request size for invalidation messages, ultimately
causing memory allocation failure.
This commit fixes this issue by tracking distributed invalidation
messages separately per decoded transaction and not redistributing
these messages to other in-progress transactions. The maximum size of
distributed invalidation messages that one transaction can store is
limited to MAX_DISTR_INVAL_MSG_PER_TXN (8MB). Once the size of the
distributed invalidation messages exceeds this threshold, we
invalidate all caches in locations where distributed invalidation
messages need to be executed.
Back-patch to all supported versions where we introduced the fix by
commit 4909b38af0.
Note that this commit adds two new fields to ReorderBufferTXN to store
the distributed transactions. This change breaks ABI compatibility in
back branches, affecting third-party extensions that depend on the
size of the ReorderBufferTXN struct, though this scenario seems
unlikely.
Additionally, it adds a new flag to the txn_flags field of
ReorderBufferTXN to indicate distributed invalidation message
overflow. This should not affect existing implementations, as it is
unlikely that third-party extensions use unused bits in the txn_flags
field.
Bug: #18938#18942
Author: vignesh C <vignesh21@gmail.com>
Reported-by: Duncan Sands <duncan.sands@deepbluecap.com>
Reported-by: John Hutchins <john.hutchins@wicourts.gov>
Reported-by: Laurence Parry <greenreaper@hotmail.com>
Reported-by: Max Madden <maxmmadden@gmail.com>
Reported-by: Braulio Fdo Gonzalez <brauliofg@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Discussion: https://postgr.es/m/680bdaf6-f7d1-4536-b580-05c2760c67c6@deepbluecap.com
Discussion: https://postgr.es/m/18942-0ab1e5ae156613ad@postgresql.org
Discussion: https://postgr.es/m/18938-57c9a1c463b68ce0@postgresql.org
Discussion: https://postgr.es/m/CAD1FGCT2sYrP_70RTuo56QTizyc+J3wJdtn2gtO3VttQFpdMZg@mail.gmail.com
Discussion: https://postgr.es/m/CANO2=B=2BT1hSYCE=nuuTnVTnjidMg0+-FfnRnqM6kd23qoygg@mail.gmail.com
Backpatch-through: 13
Per the letter of the C11 standard, one must #define
__STDC_WANT_LIB_EXT1__ as 1 before including <string.h> in order to
have access to memset_s(). It appears that many platforms are lenient
about this, because we weren't doing it and yet the code appeared to
work anyway. But we now find that with -std=c11, macOS is strict and
doesn't declare memset_s, leading to compile failures since we try to
use it anyway. (Given the lack of prior reports, perhaps this is new
behavior in the latest SDK? No matter, we're clearly in the wrong.)
In addition to the immediate problem, which could be fixed merely by
adding the needed #define to explicit_bzero.c, it seems possible that
our configure-time probe for memset_s() could fail in case a platform
implements the function in some odd way due to this spec requirement.
This concern can be fixed in largely the same way that we dealt with
strchrnul() in 6da2ba1d8: switch to using a declaration-based
configure probe instead of a does-it-link probe.
Back-patch to v13 where we started using memset_s().
Reported-by: Lakshmi Narayana Velayudam <dev.narayana.v@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAA4pTnLcKGG78xeOjiBr5yS7ZeE-Rh=FaFQQGOO=nPzA1L8yEA@mail.gmail.com
Backpatch-through: 13
With GB18030 as source encoding, applications could crash the server via
SQL functions convert() or convert_from(). Applications themselves
could crash after passing unterminated GB18030 input to libpq functions
PQescapeLiteral(), PQescapeIdentifier(), PQescapeStringConn(), or
PQescapeString(). Extension code could crash by passing unterminated
GB18030 input to jsonapi.h functions. All those functions have been
intended to handle untrusted, unterminated input safely.
A crash required allocating the input such that the last byte of the
allocation was the last byte of a virtual memory page. Some malloc()
implementations take measures against that, making the SIGSEGV hard to
reach. Back-patch to v13 (all supported versions).
Author: Noah Misch <noah@leadboat.com>
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Backpatch-through: 13
Security: CVE-2025-4207
synchronous_standby_names cannot be reloaded safely by backends, and the
checkpointer is in charge of updating a state in shared memory if the
GUC is enabled in WalSndCtl, to let the backends know if they should
wait or not for a given LSN. This provides a strict control on the
timing of the waiting queues if the GUC is enabled or disabled, then
reloaded. The checkpointer is also in charge of waking up the backends
that could be waiting for a LSN when the GUC is disabled.
This logic had a race condition at startup, where it would be possible
for backends to not wait for a LSN even if synchronous_standby_names is
enabled. This would cause visibility issues with transactions that we
should be waiting for but they were not. The problem lasts until the
checkpointer does its initial update of the shared memory state when it
loads synchronous_standby_names.
In order to take care of this problem, the shared memory state in
WalSndCtl is extended to detect if it has been initialized by the
checkpointer, and not only check if synchronous_standby_names is
defined. In WalSndCtlData, sync_standbys_defined is renamed to
sync_standbys_status, a bits8 able to know about two states:
- If the shared memory state has been initialized. This flag is set by
the checkpointer at startup once, and never removed.
- If synchronous_standby_names is known as defined in the shared memory
state. This is the same as the previous sync_standbys_defined in
WalSndCtl.
This method gives a way for backends to decide what they should do until
the shared memory area is initialized, and they now ultimately fall back
to a check on the GUC value in this case, which is the best thing that
can be done.
Fortunately, SyncRepUpdateSyncStandbysDefined() is called immediately by
the checkpointer when this process starts, so the window is very narrow.
It is possible to enlarge the problematic window by making the
checkpointer wait at the beginning of SyncRepUpdateSyncStandbysDefined()
with a hardcoded sleep for example, and doing so has showed that a 2PC
visibility test is indeed failing. On machines slow enough, this bug
would cause spurious failures.
In 17~, we have looked at the possibility of adding an injection point
to have a reproducible test, but as the problematic window happens at
early startup, we would need to invent a way to make an injection point
optionally persistent across restarts when attached, something that
would be fine for this case as it would involve the checkpointer. This
issue is quite old, and can be reproduced on all the stable branches.
Author: Melnikov Maksim <m.melnikov@postgrespro.ru>
Co-authored-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/163fcbec-900b-4b07-beaa-d2ead8634bec@postgrespro.ru
Backpatch-through: 13
Data loss can happen when the DDLs like ALTER PUBLICATION ... ADD TABLE ...
or ALTER TYPE ... that don't take a strong lock on table happens
concurrently to DMLs on the tables involved in the DDL. This happens
because logical decoding doesn't distribute invalidations to concurrent
transactions and those transactions use stale cache data to decode the
changes. The problem becomes bigger because we keep using the stale cache
even after those in-progress transactions are finished and skip the
changes required to be sent to the client.
This commit fixes the issue by distributing invalidation messages from
catalog-modifying transactions to all concurrent in-progress transactions.
This allows the necessary rebuild of the catalog cache when decoding new
changes after concurrent DDL.
We observed performance regression primarily during frequent execution of
*publication DDL* statements that modify the published tables. The
regression is minor or nearly nonexistent for DDLs that do not affect the
published tables or occur infrequently, making this a worthwhile cost to
resolve a longstanding data loss issue.
An alternative approach considered was to take a strong lock on each
affected table during publication modification. However, this would only
address issues related to publication DDLs (but not the ALTER TYPE ...)
and require locking every relation in the database for publications
created as FOR ALL TABLES, which is impractical.
The bug exists in all supported branches, but we are backpatching till 14.
The fix for 13 requires somewhat bigger changes than this fix, so the fix
for that branch is still under discussion.
Reported-by: hubert depesz lubaczewski <depesz@depesz.com>
Reported-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Author: Shlok Kyal <shlok.kyal.oss@gmail.com>
Author: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Zhijie Hou <houzj.fnst@fujitsu.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Tested-by: Benoit Lobréau <benoit.lobreau@dalibo.com>
Backpatch-through: 14
Discussion: https://postgr.es/m/de52b282-1166-1180-45a2-8d8917ca74c6@enterprisedb.com
Discussion: https://postgr.es/m/CAD21AoAenVqiMjpN-PvGHL1N9DWnHSq673bfgr6phmBUzx=kLQ@mail.gmail.com
Before a restartpoint finishes PreallocXlogFiles(), a startup process
KeepFileRestoredFromArchive() call can unlink the preallocated segment.
If a CHECKPOINT sql command had elicited the restartpoint experiencing
the race condition, that sql command failed. Moreover, the restartpoint
omitted its log_checkpoints message and some inessential resource
reclamation. Prevent the ERROR by skipping open() of the segment.
Since these consequences are so minor, no back-patch.
This commit has been applied as of 2b3e4672f7 in v15 and newer
versions. This is required on stable branches of v13 and v14 to fix a
regression reported by Noah Misch, introduced by 1f95181b44, causing
spurious failures in archive recovery (neither streaming nor archive
recovery) with concurrent restartpoints. The backpatched versions of
the patches have been aligned on these branches by me, Noah Misch is the
author. Tests have been conducted by the both of us.
Reported-by: Arun Thirupathi
Author: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/20210202151416.GB3304930@rfd.leadboat.com
Discussion: https://postgr.es/m/20250306193013.36.nmisch@google.com
Backpatch-through: 13
Only initdb used it. initdb refuses to operate on a non-empty directory
and generally does not cope with pre-existing files of other kinds.
Hence, use the opportunity to simplify.
This commit has been applied as of 421484f79c in v15 and newer
versions. This is required on stable branches of v13 and v14 to fix a
regression reported by Noah Misch, introduced by 1f95181b44, causing
spurious failures in archive recovery (neither streaming nor archive
recovery) with concurrent restartpoints. The backpatched versions of
the patches have been aligned on these branches by me, Noah Misch is the
author. Tests have been conducted by the both of us.
Reported-by: Arun Thirupathi
Author: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/20210202151416.GB3304930@rfd.leadboat.com
Discussion: https://postgr.es/m/20250306193013.36.nmisch@google.com
Backpatch-through: 13
Cold paths, initdb and end-of-recovery, used it. Don't optimize them.
This commit has been applied as of c53c6b98d3 in v15 and newer
versions. This is required on stable branches of v13 and v14 to fix a
regression reported by Noah Misch, introduced by 1f95181b44, causing
spurious failures in archive recovery (neither streaming nor archive
recovery) with concurrent restartpoints. The backpatched versions of
the patches have been aligned on these branches by me, Noah Misch is the
author. Tests have been conducted by the both of us.
Reported-by: Arun Thirupathi
Author: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/20210202151416.GB3304930@rfd.leadboat.com
Discussion: https://postgr.es/m/20250306193013.36.nmisch@google.com
Backpatch-through: 13
This replaces dblink's blocking libpq calls, allowing cancellation and
allowing DROP DATABASE (of a database not involved in the query). Apart
from explicit dblink_cancel_query() calls, dblink still doesn't cancel
the remote side. The replacement for the blocking calls consists of
new, general-purpose query execution wrappers in the libpqsrv facility.
Out-of-tree extensions should adopt these.
The original commit d3c5f37dd5 did not
back-patch. Back-patch now to v16-v13, bringing coverage to all supported
versions. This back-patch omits the orignal's refactoring in postgres_fdw.
Discussion: https://postgr.es/m/20231122012945.74@rfd.leadboat.com
Currently dblink and postgres_fdw don't process interrupts during connection
establishment. Besides preventing query cancellations etc, this can lead to
undetected deadlocks, as global barriers are not processed.
Libpqwalreceiver in contrast, processes interrupts during connection
establishment. The required code is not trivial, so duplicating it into
additional places does not seem like a good option.
These aforementioned undetected deadlocks are the reason for the spate of CI
test failures in the FreeBSD 'test_running' step.
For now the helper library is just a header, as it needs to be linked into
each extension using libpq, and it seems too small to be worth adding a
dedicated static library for.
The conversion to the helper are done in subsequent commits.
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20220925232237.p6uskba2dw6fnwj2@awork3.anarazel.de
As of 15.4, macOS has strchrnul(), but access to it is blocked behind
a check for MACOSX_DEPLOYMENT_TARGET >= 15.4. But our does-it-link
configure check finds it, so we try to use it, and fail with the
present default deployment target (namely 15.0). This accounts for
today's buildfarm failures on indri and sifaka.
This is the identical problem that we faced some years ago when Apple
introduced preadv and pwritev in the same way. We solved that in
commit f014b1b9b by using AC_CHECK_DECLS instead of AC_CHECK_FUNCS
to check the functions' availability. So do the same now for
strchrnul(). Interestingly, we already had a workaround for
"the link check doesn't agree with <string.h>" cases with glibc,
which we no longer need since only the header declaration is being
checked.
Testing this revealed that the meson version of this check has never
worked, because it failed to use "-Werror=unguarded-availability-new".
(Apparently nobody's tried to build with meson on macOS versions that
lack preadv/pwritev as standard.) Adjust that while at it. Also,
we had never put support for "-Werror=unguarded-availability-new"
into v13, but we need that now.
Co-authored-by: Tom Lane <tgl@sss.pgh.pa.us>
Co-authored-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/385134.1743523038@sss.pgh.pa.us
Backpatch-through: 13
Letting the rewriter keep RangeTblEntry.relid when expanding a view
RTE, without making the outfuncs/readfuncs changes that went along
with that originally, is more problematic than I realized. It causes
WRITE_READ_PARSE_PLAN_TREES testing to fail because outfuncs/readfuncs
don't think relid need be saved in an RTE_SUBQUERY RTE.
There doesn't seem to be any other good route to fixing the whole-row
Var problem solved at f4e7756ef, so we just have to deal with the
consequences. We can make the eventually-produced plan tree safe
for WRITE_READ_PARSE_PLAN_TREES by clearing the relid field at the
end of planning, as was already being done for the functions field.
(The functions field is not problematic here because our abuse of it
is strictly local to the planner.) However, there is no nice fix for
the post-rewrite WRITE_READ_PARSE_PLAN_TREES test.
The solution adopted here is to remove the post-rewrite test in the
affected branches. That's surely less than ideal, but a couple of
arguments can be made why it's not unacceptable. First, the behavior
of outfuncs/readfuncs for parsetrees in these branches is frozen no
matter what, because of catalog stability requirements. So we're not
testing anything that is going to change. Second, testing
WRITE_READ_PARSE_PLAN_TREES at this particular time doesn't correspond
to any direct system functionality requirement, neither rule storage
nor plan transmission.
Reported-by: Andres Freund <andres@anarazel.de>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Discussion: https://postgr.es/m/3518c50a-ab18-482f-b916-a37263622501@deepbluecap.com
Backpatch-through: 13-15
