Introduce an abstraction allowing relation data to be accessed as a
stream of buffers, with an implementation that is more efficient than
the equivalent sequence of ReadBuffer() calls.
Client code supplies a callback that can say which block number it wants
next, and then consumes individual buffers one at a time from the
stream. This division puts read_stream.c in control of how far ahead it
can see and allows it to read clusters of neighboring blocks with
StartReadBuffers(). It also issues POSIX_FADV_WILLNEED advice ahead of
time when random access is detected.
Other variants of I/O stream will be proposed in future work (for
example to support recovery, whose LsnReadQueue device in
xlogprefetcher.c is a distant cousin of this code and should eventually
be replaced by this), but this basic API is sufficient for many common
executor usage patterns involving predictable access to a single fork of
a single relation.
Several patches using this API are proposed separately.
This stream concept is loosely based on ideas from Andres Freund on how
we should pave the way for later work on asynchronous I/O.
Author: Thomas Munro <thomas.munro@gmail.com>
Author: Heikki Linnakangas <hlinnaka@iki.fi> (contributions)
Author: Melanie Plageman <melanieplageman@gmail.com> (contributions)
Suggested-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Tested-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Discussion: https://postgr.es/m/CA+hUKGJkOiOCa+mag4BF+zHo7qo=o9CFheB8=g6uT5TUm2gkvA@mail.gmail.com
Break ReadBuffer() up into two steps. StartReadBuffers() and
WaitReadBuffers() give us two main advantages:
1. Multiple consecutive blocks can be read with one system call.
2. Advice (hints of future reads) can optionally be issued to the
kernel ahead of time.
The traditional ReadBuffer() function is now implemented in terms of
those functions, to avoid duplication.
A new GUC io_combine_limit is defined, and the functions for limiting
per-backend pin counts are made into public APIs. Those are provided
for use by callers of StartReadBuffers(), when deciding how many buffers
to read at once. The following commit will add a higher level mechanism
for doing that automatically with a practical interface.
With some more infrastructure in later work, StartReadBuffers() could
be extended to start real asynchronous I/O instead of just issuing
advice and leaving WaitReadBuffers() to do the work synchronously.
Author: Thomas Munro <thomas.munro@gmail.com>
Author: Andres Freund <andres@anarazel.de> (some optimization tweaks)
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Tested-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Discussion: https://postgr.es/m/CA+hUKGJkOiOCa+mag4BF+zHo7qo=o9CFheB8=g6uT5TUm2gkvA@mail.gmail.com
Previously, we used a simple array for storing dead tuple IDs during
lazy vacuum, which had a number of problems:
* The array used a single allocation and so was limited to 1GB.
* The allocation was pessimistically sized according to table size.
* Lookup with binary search was slow because of poor CPU cache and
branch prediction behavior.
This commit replaces that array with the TID store from commit
30e144287a.
Since the backing radix tree makes small allocations as needed, the
1GB limit is now gone. Further, the total memory used is now often
smaller by an order of magnitude or more, depending on the
distribution of blocks and offsets. These two features should make
multiple rounds of heap scanning and index cleanup an extremely rare
event. TID lookup during index cleanup is also several times faster,
even more so when index order is correlated with heap tuple order.
Since there is no longer a predictable relationship between the number
of dead tuples vacuumed and the space taken up by their TIDs, the
number of tuples no longer provides any meaningful insights for users,
nor is the maximum number predictable. For that reason this commit
also changes to byte-based progress reporting, with the relevant
columns of pg_stat_progress_vacuum renamed accordingly to
max_dead_tuple_bytes and dead_tuple_bytes.
For parallel vacuum, both the TID store and supplemental information
specific to vacuum are shared among the parallel vacuum workers. As
with the previous array, we don't take any locks on TidStore during
parallel vacuum since writes are still only done by the leader
process.
Bump catalog version.
Reviewed-by: John Naylor, (in an earlier version) Dilip Kumar
Discussion: https://postgr.es/m/CAD21AoAfOZvmfR0j8VmZorZjL7RhTiQdVttNuC4W-Shdc2a-AA%40mail.gmail.com
66c0185a3 adjusted the UNION planner to request that union child queries
produce Paths correctly ordered to implement the UNION by way of
MergeAppend followed by Unique. The code there made a bad assumption
that if the root->parent_root->parse had setOperations set that the
query must be the child subquery of a set operation. That's not true
when it comes to planning a non-inlined CTE which is parented by a set
operation. This causes issues as the CTE's targetlist has no
requirement to match up to the SetOperationStmt's groupClauses
Fix this by adding a new parameter to both subquery_planner() and
grouping_planner() to explicitly pass the SetOperationStmt only when
planning set operation child subqueries.
Thank you to Tom Lane for helping to rationalize the decision on the
best function signature for subquery_planner().
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/m/242fc7c6-a8aa-2daf-ac4c-0a231e2619c1@gmail.com
Currently there is only one option, HEAP_PAGE_PRUNE_MARK_UNUSED_NOW
which replaces the old boolean argument, but upcoming patches will
introduce at least one more. Having a lot of boolean arguments makes
it hard to see at the call sites what the arguments mean, so prefer a
bitmask of options with human-readable names.
Author: Melanie Plageman <melanieplageman@gmail.com>
Author: Heikki Linnakangas <heikki.linnakangas@iki.fi>
Discussion: https://www.postgresql.org/message-id/20240401172219.fngjosaqdgqqvg4e@liskov
This commit adds a new COPY option LOG_VERBOSITY, which controls the
amount of messages emitted during processing. Valid values are
'default' and 'verbose'.
This is currently used in COPY FROM when ON_ERROR option is set to
ignore. If 'verbose' is specified, a NOTICE message is emitted for
each discarded row, providing additional information such as line
number, column name, and the malformed value. This helps users to
identify problematic rows that failed to load.
Author: Bharath Rupireddy
Reviewed-by: Michael Paquier, Atsushi Torikoshi, Masahiko Sawada
Discussion: https://www.postgresql.org/message-id/CALj2ACUk700cYhx1ATRQyRw-fBM%2BaRo6auRAitKGff7XNmYfqQ%40mail.gmail.com
After encountering the NUL terminator, the word-at-a-time loop exits
and we must hash the remaining bytes. Previously we calculated the
terminator's position and re-loaded the remaining bytes from the input
string. We already have all the data we need in a register, so let's
just mask off the bytes we need and hash them immediately. The mask can
be cheaply computed without knowing the terminator's position. We still
need that position for the length calculation, but the CPU can now
do that in parallel with other work, shortening the dependency chain.
Ants Aasma and John Naylor
Discussion: https://postgr.es/m/CANwKhkP7pCiW_5fAswLhs71-JKGEz1c1%2BPC0a_w1fwY4iGMqUA%40mail.gmail.com
Previously, the executor did index insert unconditionally after calling
table AM interface methods tuple_insert() and multi_insert(). This commit
introduces the new parameter insert_indexes for these two methods. Setting
'*insert_indexes' to true saves the current logic. Setting it to false
indicates that table AM cares about index inserts itself and doesn't want the
caller to do that.
Discussion: https://postgr.es/m/CAPpHfdurb9ycV8udYqM%3Do0sPS66PJ4RCBM1g-bBpvzUfogY0EA%40mail.gmail.com
Reviewed-by: Pavel Borisov, Matthias van de Meent, Mark Dilger
Currently, there is just one algorithm for sampling tuples from a table written
in acquire_sample_rows(). Custom table AM can just redefine the way to get the
next block/tuple by implementing scan_analyze_next_block() and
scan_analyze_next_tuple() API functions.
This approach doesn't seem general enough. For instance, it's unclear how to
sample this way index-organized tables. This commit allows table AM to
encapsulate the whole sampling algorithm (currently implemented in
acquire_sample_rows()) into the relation_analyze() API function.
Discussion: https://postgr.es/m/CAPpHfdurb9ycV8udYqM%3Do0sPS66PJ4RCBM1g-bBpvzUfogY0EA%40mail.gmail.com
Reviewed-by: Pavel Borisov, Matthias van de Meent
This SQL-callable function behaves much like our internal utility
function getBaseType(), except it returns NULL rather than failing for
an invalid type OID. (That behavior is modeled on our experience with
other catalog-inquiry functions such as the ACL checking functions.)
The key advantage over doing a join to pg_type is that it will loop
as needed to find the bottom base type of a nest of domains.
Steve Chavez, reviewed by jian he and others
Discussion: https://postgr.es/m/CAGRrpzZSX8j=MQcbCSEisFA=ic=K3bknVfnFjAv1diVJxFHJvg@mail.gmail.com
This allows MERGE commands to include WHEN NOT MATCHED BY SOURCE
actions, which operate on rows that exist in the target relation, but
not in the data source. These actions can execute UPDATE, DELETE, or
DO NOTHING sub-commands.
This is in contrast to already-supported WHEN NOT MATCHED actions,
which operate on rows that exist in the data source, but not in the
target relation. To make this distinction clearer, such actions may
now be written as WHEN NOT MATCHED BY TARGET.
Writing WHEN NOT MATCHED without specifying BY SOURCE or BY TARGET is
equivalent to writing WHEN NOT MATCHED BY TARGET.
Dean Rasheed, reviewed by Alvaro Herrera, Ted Yu and Vik Fearing.
Discussion: https://postgr.es/m/CAEZATCWqnKGc57Y_JanUBHQXNKcXd7r=0R4NEZUVwP+syRkWbA@mail.gmail.com
This brings the titlecasing implementation for the builtin provider
out of formatting.c and into unicode_case.c, along with
unicode_strlower() and unicode_strupper(). Accepts an arbitrary word
boundary callback.
Simple for now, but can be extended to support the Unicode Default
Case Conversion algorithm with full case mapping.
Discussion: https://postgr.es/m/3bc653b5d562ae9e2838b11cb696816c328a489a.camel@j-davis.com
Reviewed-by: Peter Eisentraut
This is marked PGC_SIGHUP, so it can only be set in a configuration
file, not anywhere else; and it is also marked GUC_DISALLOW_IN_AUTO_FILE,
so it can't be set using ALTER SYSTEM. When set to false, the
ALTER SYSTEM command is disallowed.
There was considerable concern that this would be misinterpreted as
a security feature, which it is not, because a determined superuser
has various ways of bypassing it. Hence, a lot of work has gone into
wordsmithing the documentation, in the hopes of avoiding any such
confusion.
Jelte Fennemia-Nio and Gabriele Bartolini, with wording suggestions
for the documentation from many others.
Discussion: http://postgr.es/m/CA%2BVUV5rEKt2%2BCdC_KUaPoihMu%2Bi5ChT4WVNTr4CD5-xXZUfuQw%40mail.gmail.com
Apparently these markers cause the modules to not link correctly in some
platforms, at least per buildfarm member indri; moreover, this code is
only used in modules that don't have a translation. If we someday add
i18n support to contrib/ it might be worth revisiting this.
Commit 61461a300c introduced new functions to libpq for cancelling
queries. This commit introduces a helper function that backend-side
libraries and extensions can use to invoke those. This function takes a
timeout and can itself be interrupted while it is waiting for a cancel
request to be sent and processed, instead of being blocked.
This replaces the usage of the old functions in postgres_fdw and dblink.
Finally, it also adds some test coverage for the cancel support in
postgres_fdw.
Author: Jelte Fennema-Nio <postgres@jeltef.nl>
Discussion: https://postgr.es/m/CAGECzQT_VgOWWENUqvUV9xQmbaCyXjtRRAYO8W07oqashk_N+g@mail.gmail.com
Previously, the behavior of TidStoreCreate() was inconsistent between
local and shared TidStore instances in terms of memory limitation. For
local TidStore, a memory context was created with initial and maximum
memory block sizes, as well as a minimum memory context size, based on
the specified max_bytes values. However, for shared TidStore, the
provided DSA area was used for TID storage. Although commit bb952c8c8b
allowed specifying the initial and maximum DSA segment sizes, callers
would have needed to clamp their own limits, which was not consistent
and user-friendly.
With this commit, when creating a shared TidStore, a dedicated DSA
area is created for TID storage instead of using a provided DSA
area. The initial and maximum DSA segment sizes are chosen based on
the specified max_bytes. Other processes can attach to the shared
TidStore using the handle of the created DSA returned by the new
TidStoreGetDSA() function and the DSA pointer returned by
TidStoreGetHandle(). The created DSA has the same lifetime as the
shared TidStore and is deleted when all processes detach from it.
To improve clarity, the TidStoreCreate() function has been divided
into two separate functions: TidStoreCreateLocal() and
TidStoreCreateShared().
Reviewed-by: John Naylor
Discussion: https://postgr.es/m/CAD21AoAyc1j%3DBCdUqZfk6qbdjZ68UgRx1Gkpk0oah4K7S0Ri9g%40mail.gmail.com
The user-facing name is "Other Platforms and Clients", but the
internal name seems too focused on clients specifically, especially
given the plan to add a new setting to this session that is about
platform or deployment model compatibility rather than client
compatibility.
Jelte Fennema-Nio
Discussion: http://postgr.es/m/CAGECzQTfMbDiM6W3av+3weSnHxJvPmuTEcjxVvSt91sQBdOxuQ@mail.gmail.com
This adds 3 new variants of the random() function:
random(min integer, max integer) returns integer
random(min bigint, max bigint) returns bigint
random(min numeric, max numeric) returns numeric
Each returns a random number x in the range min <= x <= max.
For the numeric function, the number of digits after the decimal point
is equal to the number of digits that "min" or "max" has after the
decimal point, whichever has more.
The main entry points for these functions are in a new C source file.
The existing random(), random_normal(), and setseed() functions are
moved there too, so that they can all share the same PRNG state, which
is kept private to that file.
Dean Rasheed, reviewed by Jian He, David Zhang, Aleksander Alekseev,
and Tomas Vondra.
Discussion: https://postgr.es/m/CAEZATCV89Vxuq93xQdmc0t-0Y2zeeNQTdsjbmV7dyFBPykbV4Q@mail.gmail.com
Previously, the DSA segment size always started with 1MB and grew up
to DSA_MAX_SEGMENT_SIZE. It was inconvenient in certain scenarios,
such as when the caller desired a soft constraint on the total DSA
segment size, limiting it to less than 1MB.
This commit introduces the capability to specify the initial and
maximum DSA segment sizes when creating a DSA area, providing more
flexibility and control over memory usage.
Reviewed-by: John Naylor, Tomas Vondra
Discussion: https://postgr.es/m/CAD21AoAYGGC1ePjVX0H%2Bpp9rH%3D9vuPK19nNOiu12NprdV5TVJA%40mail.gmail.com
The newly-introduced "one_by_one" label produces -Wunused-label
warnings when building without SIMD support. To fix, move the
label into the SIMD section of this function.
Oversight in commit 7644a7340c.
Reported-by: Tom Lane
Discussion: https://postgr.es/m/3189995.1711495704%40sss.pgh.pa.us
This commit improves the performance of pg_lfind32() in many cases
by modifying it to process the remaining "tail" of elements with
SIMD instructions instead of processing them one-by-one. Since the
SIMD code processes a large block of elements, this means that we
will process a subset of elements more than once, but that won't
affect the correctness of the result, and testing has shown that
this helps more cases than it regresses. With this change, the
standard one-by-one linear search code is only used for small
arrays and for platforms without SIMD support.
Suggested-by: John Naylor
Reviewed-by: John Naylor
Discussion: https://postgr.es/m/20231129171526.GA857928%40nathanxps13
If we know the sort order of a CTE's output, and it is relevant
to the outer query, label the CTE's outer-query access path using
those pathkeys. This may enable optimizations such as avoiding
a sort in the outer query.
The code for hoisting pathkeys into the outer query already exists
for regular RTE_SUBQUERY subqueries, but it wasn't getting used for
CTEs, possibly out of concern for maintaining an optimization fence
between the CTE and the outer query. However, on the same arguments
used for commit f7816aec2, there seems no harm in letting the outer
query know what the inner query decided to do.
In support of this, we now remember the best Path as well as Plan
for each subquery for the rest of the planner run. There may be
future applications for having that at hand, and it surely costs
little to build one more List.
Richard Guo (minor mods by me)
Discussion: https://postgr.es/m/CAMbWs49xYd3f8CrE8-WW3--dV1zH_sDSDn-vs2DzHj81Wcnsew@mail.gmail.com
ObjectClass is an enum whose values correspond to catalog OIDs. But
the extra layer of redirection, which is used only in small parts of
the code, and the similarity to ObjectType, are confusing and
cumbersome.
One advantage has been that some switches processing the OCLASS enum
don't have "default:" cases. This is so that the compiler tells us
when we fail to add support for some new object class. But you can
also handle that with some assertions and proper test coverage. It's
not even clear how strong this benefit is. For example, in
AlterObjectNamespace_oid(), you could still put a new OCLASS into the
"ignore object types that don't have schema-qualified names" case, and
it might or might not be wrong. Also, there are already various
OCLASS switches that do have a default case, so it's not even clear
what the preferred coding style should be.
Reviewed-by: jian he <jian.universality@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/flat/CAGECzQT3caUbcCcszNewCCmMbCuyP7XNAm60J3ybd6PN5kH2Dw%40mail.gmail.com
Currently, in read committed transaction isolation mode (default), we have the
following sequence of actions when tuple_update()/tuple_delete() finds
the tuple updated by the concurrent transaction.
1. Attempt to update/delete tuple with tuple_update()/tuple_delete(), which
returns TM_Updated.
2. Lock tuple with tuple_lock().
3. Re-evaluate plan qual (recheck if we still need to update/delete and
calculate the new tuple for update).
4. Second attempt to update/delete tuple with tuple_update()/tuple_delete().
This attempt should be successful, since the tuple was previously locked.
This commit eliminates step 2 by taking the lock during the first
tuple_update()/tuple_delete() call. The heap table access method saves some
effort by checking the updated tuple once instead of twice. Future
undo-based table access methods, which will start from the latest row version,
can immediately place a lock there.
Also, this commit makes tuple_update()/tuple_delete() optionally save the old
tuple into the dedicated slot. That saves efforts on re-fetching tuples in
certain cases.
The code in nodeModifyTable.c is simplified by removing the nested switch/case.
Discussion: https://postgr.es/m/CAPpHfdua-YFw3XTprfutzGp28xXLigFtzNbuFY8yPhqeq6X5kg%40mail.gmail.com
Reviewed-by: Aleksander Alekseev, Pavel Borisov, Vignesh C, Mason Sharp
Reviewed-by: Andres Freund, Chris Travers
It's now possible to specify a table access method via
CREATE TABLE ... USING for a partitioned table, as well change it with
ALTER TABLE ... SET ACCESS METHOD. Specifying an AM for a partitioned
table lets the value be used for all future partitions created under it,
closely mirroring the behavior of the TABLESPACE option for partitioned
tables. Existing partitions are not modified.
For a partitioned table with no AM specified, any new partitions are
created with the default_table_access_method.
Also add ALTER TABLE ... SET ACCESS METHOD DEFAULT, which reverts to the
original state of using the default for new partitions.
The relcache of partitioned tables is not changed: rd_tableam is not
set, even if a partitioned table has a relam set.
Author: Justin Pryzby <pryzby@telsasoft.com>
Author: Soumyadeep Chakraborty <soumyadeep2007@gmail.com>
Author: Michaël Paquier <michael@paquier.xyz>
Reviewed-by: The authors themselves
Discussion: https://postgr.es/m/CAE-ML+9zM4wJCGCBGv01k96qQ3gFv4WFcFy=zqPHKeaEFwwv6A@mail.gmail.com
Discussion: https://postgr.es/m/20210308010707.GA29832%40telsasoft.com
The new combined WAL record is now used for pruning, freezing and 2nd
pass of vacuum. This is in preparation for changing VACUUM to write a
combined prune+freeze record per page, instead of separate two
records. The new WAL record format now supports that, but the code
still always writes separate records for pruning and freezing.
This reserves separate XLOG_HEAP2_* info codes for when the pruning
record is emitted for on-access pruning or VACUUM, per Peter
Geoghegan's suggestion. The record format is identical, but having
separate info codes makes it easier analyze pruning and vacuuming with
pg_waldump.
The function to emit the new WAL record, log_heap_prune_and_freeze(),
is in pruneheap.c. The existing heap_log_freeze_plan() and its
subroutines are moved to pruneheap.c without changes, to keep them
together with log_heap_prune_and_freeze().
Author: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://www.postgresql.org/message-id/CAAKRu_azf-zH%3DDgVbquZ3tFWjMY1w5pO8m-TXJaMdri8z3933g@mail.gmail.com
Discussion: https://www.postgresql.org/message-id/CAAKRu_b2oE4GL%3Dq4g9mcByS9yT7wTQvEH9OLpabj28e%2BWKFi2A@mail.gmail.com
This commit adds a new property called last_inactive_time for slots. It is
set to 0 whenever a slot is made active/acquired and set to the current
timestamp whenever the slot is inactive/released or restored from the disk.
Note that we don't set the last_inactive_time for the slots currently being
synced from the primary to the standby because such slots are typically
inactive as decoding is not allowed on those.
The 'last_inactive_time' will be useful on production servers to debug and
analyze inactive replication slots. It will also help to know the lifetime
of a replication slot - one can know how long a streaming standby, logical
subscriber, or replication slot consumer is down.
The 'last_inactive_time' will also be useful to implement inactive
timeout-based replication slot invalidation in a future commit.
Author: Bharath Rupireddy
Reviewed-by: Bertrand Drouvot, Amit Kapila, Shveta Malik
Discussion: https://www.postgresql.org/message-id/CALj2ACW4aUe-_uFQOjdWCEN-xXoLGhmvRFnL8SNw_TZ5nJe+aw@mail.gmail.com
This teaches build_child_join_sjinfo() to create the dummy
SpecialJoinInfos (those created for inner joins) directly for a given
child join, skipping the unnecessary overhead of translating the
parent joinrel's SpecialJoinInfo.
To that end, this commit moves the code to initialize the dummy
SpecialJoinInfos to a new function named init_dummy_sjinfo() and
changes the few existing sites that have this code and
build_child_join_sjinfo() to call this new function.
Author: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Reviewed-by: Richard Guo <guofenglinux@gmail.com>
Reviewed-by: Amit Langote <amitlangote09@gmail.com>
Reviewed-by: Andrey Lepikhov <a.lepikhov@postgrespro.ru>
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Discussion: https://postgr.es/m/CAExHW5tHqEf3ASVqvFFcghYGPfpy7o3xnvhHwBGbJFMRH8KjNw@mail.gmail.com
Specifically, this commit reduces the memory consumed by the
SpecialJoinInfos that are allocated for child joins in
try_partitionwise_join() by freeing them at the end of creating paths
for each child join.
A SpecialJoinInfo allocated for a given child join is a copy of the
parent join's SpecialJoinInfo, which contains the translated copies
of the various Relids bitmapsets and semi_rhs_exprs, which is a List
of Nodes. The newly added freeing step frees the struct itself and
the various bitmapsets, but not semi_rhs_exprs, because there's no
handy function to free the memory of Node trees.
Author: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Reviewed-by: Richard Guo <guofenglinux@gmail.com>
Reviewed-by: Amit Langote <amitlangote09@gmail.com>
Reviewed-by: Andrey Lepikhov <a.lepikhov@postgrespro.ru>
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Discussion: https://postgr.es/m/CAExHW5tHqEf3ASVqvFFcghYGPfpy7o3xnvhHwBGbJFMRH8KjNw@mail.gmail.com
Coverity complained about the integer handling issue; if we start with
an arbitrary non-negative shift value, the loop may decrement it down
to something less than zero before exiting. This commit adds an
assertion to make sure the 'shift' is always 0 after the loop, and
uses 0 as the shift to get the key chunk in the following operation.
Introduced by ee1b30f12.
Reported-by: Tom Lane as per coverity
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/2089517.1711299216%40sss.pgh.pa.us
Until now, UNION queries have often been suboptimal as the planner has
only ever considered using an Append node and making the results unique
by either using a Hash Aggregate, or by Sorting the entire Append result
and running it through the Unique operator. Both of these methods
always require reading all rows from the union subqueries.
Here we adjust the union planner so that it can request that each subquery
produce results in target list order so that these can be Merge Appended
together and made unique with a Unique node. This can improve performance
significantly as the union child can make use of the likes of btree
indexes and/or Merge Joins to provide the top-level UNION with presorted
input. This is especially good if the top-level UNION contains a LIMIT
node that limits the output rows to a small subset of the unioned rows as
cheap startup plans can be used.
Author: David Rowley
Reviewed-by: Richard Guo, Andy Fan
Discussion: https://postgr.es/m/CAApHDvpb_63XQodmxKUF8vb9M7CxyUyT4sWvEgqeQU-GB7QFoQ@mail.gmail.com
Add PERIOD clause to foreign key constraint definitions. This is
supported for range and multirange types. Temporal foreign keys check
for range containment instead of equality.
This feature matches the behavior of the SQL standard temporal foreign
keys, but it works on PostgreSQL's native ranges instead of SQL's
"periods", which don't exist in PostgreSQL (yet).
Reference actions ON {UPDATE,DELETE} {CASCADE,SET NULL,SET DEFAULT}
are not supported yet.
Author: Paul A. Jungwirth <pj@illuminatedcomputing.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: jian he <jian.universality@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CA+renyUApHgSZF9-nd-a0+OPGharLQLO=mDHcY4_qQ0+noCUVg@mail.gmail.com
Up to now, all of the "catcache list" objects within a catalog cache
were just chained together on a single dlist, requiring O(N) time to
search. Remarkably, we've not had serious performance problems with
that so far; but we got a complaint of a bad performance regression
from v15 in a case with a large number of roles in the system, which
traced down to O(N^2) total time when we probed N catcache lists.
Replace that data structure with a hashtable having an enlargeable
number of dlists, in an exactly parallel way to the data structure
we've used for years for the plain CatCTup cache members. The extra
cost of maintaining a hash table seems negligible, since we were
already computing a hash value for list searches.
Normally this'd be HEAD-only material, but in view of the performance
regression it seems advisable to back-patch into v16. In the v16
version of the patch, leave the dead cc_lists field where it is and
add the new fields at the end of struct catcache, to avoid possible
ABI breakage in case any external code is looking at these structs.
(We assume no external code is actually allocating new catcache
structs.)
Per report from alex work.
Discussion: https://postgr.es/m/CAGvXd3OSMbJQwOSc-Tq-Ro1CAz=vggErdSG7pv2s6vmmTOLJSg@mail.gmail.com
This adds the X509 attributes notBefore and notAfter to sslinfo
as well as pg_stat_ssl to allow verifying and identifying the
validity period of the current client certificate. OpenSSL has
APIs for extracting notAfter and notBefore, but they are only
supported in recent versions so we have to calculate the dates
by hand in order to make this work for the older versions of
OpenSSL that we still support.
Original patch by Cary Huang with additional hacking by Jacob
and myself.
Author: Cary Huang <cary.huang@highgo.ca>
Co-author: Jacob Champion <jacob.champion@enterprisedb.com>
Co-author: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/182b8565486.10af1a86f158715.2387262617218380588@highgo.ca
This changes nodeToString() to not output the actual value of location
fields in nodes, but instead it writes -1. This mirrors the fact that
stringToNode() also does not read location field values but always
stores -1.
For most uses of nodeToString(), which is to store nodes in catalog
fields, this is more useful. We don't store original query texts in
catalogs, so any lingering query location values are not meaningful.
For debugging purposes, there is a new nodeToStringWithLocations(),
which mirrors the existing stringToNodeWithLocations(). This is used
for WRITE_READ_PARSE_PLAN_TREES and nodes/print.c functions, which
covers all the debugging uses.
Reviewed-by: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CAEze2WgrCiR3JZmWyB0YTc8HV7ewRdx13j0CqD6mVkYAW+SFGQ@mail.gmail.com
Till now, the reason for replication slot invalidation is not tracked
directly in pg_replication_slots. A recent commit 007693f2a3 added
'conflict_reason' to show the reasons for slot conflict/invalidation, but
only for logical slots.
This commit adds a new column 'invalidation_reason' to show invalidation
reasons for both physical and logical slots. And, this commit also turns
'conflict_reason' text column to 'conflicting' boolean column (effectively
reverting commit 007693f2a3). The 'conflicting' column is true for
invalidation reasons 'rows_removed' and 'wal_level_insufficient' because
those make the slot conflict with recovery. When 'conflicting' is true,
one can now look at the new 'invalidation_reason' column for the reason
for the logical slot's conflict with recovery.
The new 'invalidation_reason' column will also be useful to track other
invalidation reasons in the future commit.
Author: Bharath Rupireddy
Reviewed-by: Bertrand Drouvot, Amit Kapila, Shveta Malik
Discussion: https://www.postgresql.org/message-id/ZfR7HuzFEswakt/a%40ip-10-97-1-34.eu-west-3.compute.internal
Discussion: https://www.postgresql.org/message-id/CALj2ACW4aUe-_uFQOjdWCEN-xXoLGhmvRFnL8SNw_TZ5nJe+aw@mail.gmail.com
Put the fields alias and eref earlier in the struct, so that it
matches the order in _outRangeTblEntry()/_readRangeTblEntry(). This
helps if we ever want to fully automate out/read of RangeTblEntry.
Also, it makes dumps in the debugger easier to read in the same way.
Internally, this makes no difference.
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://www.postgresql.org/message-id/flat/4b27fc50-8cd6-46f5-ab20-88dbaadca645@eisentraut.org
This is part of an effort to reduce the number of special cases in the
automatically generated node support functions.
This patch removes _jumbleRangeTblEntry() and instead adds per-field
query_jumble_ignore annotations to match the behavior of the previous
custom code. The pg_stat_statements test suite has some coverage of
this. It gets rid of the switch on rtekind; this should be
technically correct, since we do the equal and copy functions like
this also.
The list of fields to jumble has been checked and is considered
correct as of 8b29a119fd.
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://www.postgresql.org/message-id/flat/4b27fc50-8cd6-46f5-ab20-88dbaadca645@eisentraut.org
