The TABLESAMPLE and row security patches each overlooked this function,
though their errors of omission were opposite: RLS failed to zero out the
securityQuals field, leading to wasteful copying of useless expression
trees in finished plans, while TABLESAMPLE neglected to add a comment
saying that it intentionally *isn't* deleting the tablesample subtree.
There probably should be a similar comment about ctename, too.
Back-patch as appropriate.
Commit c03ad5602f introduced a planner
performance regression for UPDATE/DELETE on large inheritance sets.
It required copying the append_rel_list (which is of size proportional to
the number of inherited tables) once for each inherited table, thus
resulting in O(N^2) time and memory consumption. While it's difficult to
avoid that in general, the extra work only has to be done for
append_rel_list entries that actually reference subquery RTEs, which
inheritance-set entries will not. So we can buy back essentially all of
the loss in cases without subqueries in FROM; and even for those, the added
work is mainly proportional to the number of UNION ALL subqueries.
Back-patch to 9.2, like the previous commit.
Tom Lane and Dean Rasheed, per a complaint from Thomas Munro.
When the inner side of a nestloop SEMI or ANTI join is an indexscan that
uses all the join clauses as indexquals, it can be presumed that both
matched and unmatched outer rows will be processed very quickly: for
matched rows, we'll stop after fetching one row from the indexscan, while
for unmatched rows we'll have an indexscan that finds no matching index
entries, which should also be quick. The planner already knew about this,
but it was nonetheless charging for at least one full run of the inner
indexscan, as a consequence of concerns about the behavior of materialized
inner scans --- but those concerns don't apply in the fast case. If the
inner side has low cardinality (many matching rows) this could make an
indexscan plan look far more expensive than it actually is. To fix,
rearrange the work in initial_cost_nestloop/final_cost_nestloop so that we
don't add the inner scan cost until we've inspected the indexquals, and
then we can add either the full-run cost or just the first tuple's cost as
appropriate.
Experimentation with this fix uncovered another problem: add_path and
friends were coded to disregard cheap startup cost when considering
parameterized paths. That's usually okay (and desirable, because it thins
the path herd faster); but in this fast case for SEMI/ANTI joins, it could
result in throwing away the desired plain indexscan path in favor of a
bitmap scan path before we ever get to the join costing logic. In the
many-matching-rows cases of interest here, a bitmap scan will do a lot more
work than required, so this is a problem. To fix, add a per-relation flag
consider_param_startup that works like the existing consider_startup flag,
but applies to parameterized paths, and set it for relations that are the
inside of a SEMI or ANTI join.
To make this patch reasonably safe to back-patch, care has been taken to
avoid changing the planner's behavior except in the very narrow case of
SEMI/ANTI joins with inner indexscans. There are places in
compare_path_costs_fuzzily and add_path_precheck that are not terribly
consistent with the new approach, but changing them will affect planner
decisions at the margins in other cases, so we'll leave that for a
HEAD-only fix.
Back-patch to 9.3; before that, the consider_startup flag didn't exist,
meaning that the second aspect of the patch would be too invasive.
Per a complaint from Peter Holzer and analysis by Tomas Vondra.
An outer join appearing within the RHS of an antijoin can't commute with
the antijoin, but somehow I missed teaching make_outerjoininfo() about
that. In Teodor Sigaev's recent trouble report, this manifests as a
"could not find RelOptInfo for given relids" error within eqjoinsel();
but I think silently wrong query results are possible too, if the planner
misorders the joins and doesn't happen to trigger any internal consistency
checks. It's broken as far back as we had antijoins, so back-patch to all
supported branches.
The cross-reference to set_append_rel_pathlist() was obsoleted by
commit e2fa76d80b, which split what
had been set_rel_pathlist() and child routines into two sets of
functions. But I (tgl) evidently missed updating this comment.
Back-patch to 9.2 to avoid unnecessary divergence among branches.
Amit Langote
Previously we would re-use input subexpressions in all expression trees
attached to a Join plan node. However, if it's an outer join and the
subexpression appears in the nullable-side input, this is potentially
incorrect for apparently-matching subexpressions that came from above
the outer join (ie, targetlist and qpqual expressions), because the
executor will treat the subexpression value as NULL when maybe it should
not be.
The case is fairly hard to hit because (a) you need a non-strict
subexpression (else NULL is correct), and (b) we don't usually compute
expressions in the outputs of non-toplevel plan nodes. But we might do
so if the expressions are sort keys for a mergejoin, for example.
Probably in the long run we should make a more explicit distinction between
Vars appearing above and below an outer join, but that will be a major
planner redesign and not at all back-patchable. For the moment, just hack
set_join_references so that it will not match any non-Var expressions
coming from nullable inputs to expressions that came from above the join.
(This is somewhat overkill, in that a strict expression could still be
matched, but it doesn't seem worth the effort to check that.)
Per report from Qingqing Zhou. The added regression test case is based
on his example.
This has been broken for a very long time, so back-patch to all active
branches.
In 6f9bd50eab, we modified
expand_security_quals() to tell expand_security_qual() about when the
current RTE was the targetRelation. Unfortunately, that commit
initialized the targetRelation variable used outside of the loop over
the RTEs instead of at the start of it.
This patch moves the variable and the initialization of it into the
loop, where it should have been to begin with.
Pointed out by Dean Rasheed.
Back-patch to 9.4 as the original commit was.
Part of the intent of the parameterized-path mechanism was to handle
star-schema queries efficiently, but some overly-restrictive search
limiting logic added in commit e2fa76d80b
prevented such cases from working as desired. Fix that and add a
regression test about it. Per gripe from Marc Cousin.
This is arguably a bug rather than a new feature, so back-patch to 9.2
where parameterized paths were introduced.
In expand_security_qual(), we were handling locking correctly when a
PlanRowMark existed, but not when we were working with the target
relation (which doesn't have any PlanRowMarks, but the subquery created
for the security barrier quals still needs to lock the rows under it).
Noted by Etsuro Fujita when working with the Postgres FDW, which wasn't
properly issuing a SELECT ... FOR UPDATE to the remote side under a
DELETE.
Back-patch to 9.4 where updatable security barrier views were
introduced.
Per discussion with Etsuro and Dean Rasheed.
Back in commit 400e2c9344 I rewrote GEQO's
gimme_tree function to improve its heuristic for modifying the given tour
into a legal join order. In what can only be called a fit of hubris,
I supposed that this new heuristic would *always* find a legal join order,
and ripped out the old logic that allowed gimme_tree to sometimes fail.
The folly of this is exposed by bug #12760, in which the "greedy" clumping
behavior of merge_clump() can lead it into a dead end which could only be
recovered from by un-clumping. We have no code for that and wouldn't know
exactly what to do with it if we did. Rather than try to improve the
heuristic rules still further, let's just recognize that it *is* a
heuristic and probably must always have failure cases. So, put back the
code removed in the previous commit to allow for failure (but comment it
a bit better this time).
It's possible that this code was actually fully correct at the time and
has only been broken by the introduction of LATERAL. But having seen this
example I no longer have much faith in that proposition, so back-patch to
all supported branches.
Ordinarily we can omit checking of a WHERE condition that matches a partial
index's condition, when we are using an indexscan on that partial index.
However, in SELECT FOR UPDATE we must include the "redundant" filter
condition in the plan so that it gets checked properly in an EvalPlanQual
recheck. The planner got this mostly right, but improperly omitted the
filter condition if the index in question was on an inheritance child
table. In READ COMMITTED mode, this could result in incorrectly returning
just-updated rows that no longer satisfy the filter condition.
The cause of the error is using get_parse_rowmark() when get_plan_rowmark()
is what should be used during planning. In 9.3 and up, also fix the same
mistake in contrib/postgres_fdw. It's currently harmless there (for lack
of inheritance support) but wrong is wrong, and the incorrect code might
get copied to someplace where it's more significant.
Report and fix by Kyotaro Horiguchi. Back-patch to all supported branches.
postgres_fdw would send query conditions involving system columns to the
remote server, even though it makes no effort to ensure that system
columns other than CTID match what the remote side thinks. tableoid,
in particular, probably won't match and might have some use in queries.
Hence, prevent sending conditions that include non-CTID system columns.
Also, create_foreignscan_plan neglected to check local restriction
conditions while determining whether to set fsSystemCol for a foreign
scan plan node. This again would bollix the results for queries that
test a foreign table's tableoid.
Back-patch the first fix to 9.3 where postgres_fdw was introduced.
Back-patch the second to 9.2. The code is probably broken in 9.1 as
well, but the patch doesn't apply cleanly there; given the weak state
of support for FDWs in 9.1, it doesn't seem worth fixing.
Etsuro Fujita, reviewed by Ashutosh Bapat, and somewhat modified by me
Since we taught btree to handle ScalarArrayOpExpr quals natively (commit
9e8da0f757), the planner has always included
ScalarArrayOpExpr quals in index conditions if possible. However, if the
qual is for a non-first index column, this could result in an inferior plan
because we can no longer take advantage of index ordering (cf. commit
807a40c551). It can be better to omit the
ScalarArrayOpExpr qual from the index condition and let it be done as a
filter, so that the output doesn't need to get sorted. Indeed, this is
true for the query introduced as a test case by the latter commit.
To fix, restructure get_index_paths and build_index_paths so that we
consider paths both with and without ScalarArrayOpExpr quals in non-first
index columns. Redesign the API of build_index_paths so that it reports
what it found, saving useless second or third calls.
Report and patch by Andrew Gierth (though rather heavily modified by me).
Back-patch to 9.2 where this code was introduced, since the issue can
result in significant performance regressions compared to plans produced
by 9.1 and earlier.
If an inline-able SQL function taking a composite argument is used in a
LATERAL subselect, and the composite argument is a lateral reference,
the planner could fail with "variable not found in subplan target list",
as seen in bug #11703 from Karl Bartel. (The outer function call used in
the bug report and in the committed regression test is not really necessary
to provoke the bug --- you can get it if you manually expand the outer
function into "LATERAL (SELECT inner_function(outer_relation))", too.)
The cause of this is that we generate the reltargetlist for the referenced
relation before doing eval_const_expressions() on the lateral sub-select's
expressions (cf find_lateral_references()), so what's scheduled to be
emitted by the referenced relation is a whole-row Var, not the simplified
single-column Var produced by optimizing the function's FieldSelect on the
whole-row Var. Then setrefs.c fails to match up that lateral reference to
what's available from the outer scan.
Preserving the FieldSelect optimization in such cases would require either
major planner restructuring (to recursively do expression simplification
on sub-selects much earlier) or some amazingly ugly kluge to change the
reltargetlist of a possibly-already-planned relation. It seems better
just to skip the optimization when the Var is from an upper query level;
the case is not so common that it's likely anyone will notice a few
wasted cycles.
AFAICT this problem only occurs for uplevel LATERAL references, so
back-patch to 9.3 where LATERAL was added.
As of commit a87c72915 (which later got backpatched as far as 9.1),
we're explicitly supporting the notion that append relations can be
nested; this can occur when UNION ALL constructs are nested, or when
a UNION ALL contains a table with inheritance children.
Bug #11457 from Nelson Page, as well as an earlier report from Elvis
Pranskevichus, showed that there were still nasty bugs associated with such
cases: in particular the EquivalenceClass mechanism could try to generate
"join" clauses connecting an appendrel child to some grandparent appendrel,
which would result in assertion failures or bogus plans.
Upon investigation I concluded that all current callers of
find_childrel_appendrelinfo() need to be fixed to explicitly consider
multiple levels of parent appendrels. The most complex fix was in
processing of "broken" EquivalenceClasses, which are ECs for which we have
been unable to generate all the derived equality clauses we would like to
because of missing cross-type equality operators in the underlying btree
operator family. That code path is more or less entirely untested by
the regression tests to date, because no standard opfamilies have such
holes in them. So I wrote a new regression test script to try to exercise
it a bit, which turned out to be quite a worthwhile activity as it exposed
existing bugs in all supported branches.
The present patch is essentially the same as far back as 9.2, which is
where parameterized paths were introduced. In 9.0 and 9.1, we only need
to back-patch a small fragment of commit 5b7b5518d, which fixes failure to
propagate out the original WHERE clauses when a broken EC contains constant
members. (The regression test case results show that these older branches
are noticeably stupider than 9.2+ in terms of the quality of the plans
generated; but we don't really care about plan quality in such cases,
only that the plan not be outright wrong. A more invasive fix in the
older branches would not be a good idea anyway from a plan-stability
standpoint.)
This function created new Vars with varno different from varnoold, which
is a condition that should never prevail before setrefs.c does the final
variable-renumbering pass. The created Vars could not be seen as equal()
to normal Vars, which among other things broke equivalence-class processing
for them. The consequences of this were indeed visible in the regression
tests, in the form of failure to propagate constants as one would expect.
I stumbled across it while poking at bug #11457 --- after intentionally
disabling join equivalence processing, the security-barrier regression
tests started falling over with fun errors like "could not find pathkey
item to sort", because of failure to match the corrupted Vars to normal
ones.
While withCheckOption exprs had been handled in many cases by
happenstance, they need to be handled during set_plan_references and
more specifically down in set_plan_refs for ModifyTable plan nodes.
This is to ensure that the opfuncid's are set for operators referenced
in the withCheckOption exprs.
Identified as an issue by Thom Brown
Patch by Dean Rasheed
Back-patch to 9.4, where withCheckOption was introduced.
The code I added in commit f343a880d5 was
careless about preserving AND/OR flatness: it could create a structure with
an OR node directly underneath another one. That breaks an assumption
that's fairly important for planning efficiency, not to mention triggering
various Asserts (as reported by Benjamin Smith). Add a trifle more logic
to handle the case properly.
In some cases, not all Vars were being correctly marked as having been
modified for updatable security barrier views, which resulted in invalid
plans (eg: when security barrier views were created over top of
inheiritance structures).
In passing, be sure to update both varattno and varonattno, as _equalVar
won't consider the Vars identical otherwise. This isn't known to cause
any issues with updatable security barrier views, but was noticed as
missing while working on RLS and makes sense to get fixed.
Back-patch to 9.4 where updatable security barrier views were
introduced.
The executor has thrown errors for negative OFFSET values since 8.4 (see
commit bfce56eea4), but in a moment of brain
fade I taught the planner that OFFSET with a constant negative value was a
no-op (commit 1a1832eb08). Reinstate the
former behavior by only discarding OFFSET with a value of exactly 0. In
passing, adjust a planner comment that referenced the ancient behavior.
Back-patch to 9.3 where the mistake was introduced.
While the x output of "select x from t group by x" can be presumed unique,
this does not hold for "select x, generate_series(1,10) from t group by x",
because we may expand the set-returning function after the grouping step.
(Perhaps that should be re-thought; but considering all the other oddities
involved with SRFs in targetlists, it seems unlikely we'll change it.)
Put a check in query_is_distinct_for() so it's not fooled by such cases.
Back-patch to all supported branches.
David Rowley
A WHERE clause applied to the output of a subquery with DISTINCT should
theoretically be applied only once per distinct row; but if we push it
into the subquery then it will be evaluated at each row before duplicate
elimination occurs. If the qual is volatile this can give rise to
observably wrong results, so don't do that.
While at it, refactor a little bit to allow subquery_is_pushdown_safe
to report more than one kind of restrictive condition without indefinitely
expanding its argument list.
Although this is a bug fix, it seems unwise to back-patch it into released
branches, since it might de-optimize plans for queries that aren't giving
any trouble in practice. So apply to 9.4 but not further back.
This reverts commit ee1e5662d8, as well as
a remarkably large number of followup commits, which were mostly concerned
with the fact that the implementation didn't work terribly well. It still
doesn't: we probably need some rather basic work in the GUC infrastructure
if we want to fully support GUCs whose default varies depending on the
value of another GUC. Meanwhile, it also emerged that there wasn't really
consensus in favor of the definition the patch tried to implement (ie,
effective_cache_size should default to 4 times shared_buffers). So whack
it all back to where it was. In a followup commit, I'll do what was
recently agreed to, which is to simply change the default to a higher
value.
In general we can't discard constant-NULL inputs, since they could change
the result of the AND/OR to be NULL. But at top level of WHERE, we do not
need to distinguish a NULL result from a FALSE result, so it's okay to
treat NULL as FALSE and then simplify AND/OR accordingly.
This is a very ancient oversight, but in 9.2 and later it can lead to
failure to optimize queries that previous releases did optimize, as a
result of more aggressive parameter substitution rules making it possible
to reduce more subexpressions to NULL constants. This is the root cause of
bug #10171 from Arnold Scheffler. We could alternatively have fixed that
by teaching orclauses.c to ignore constant-NULL OR arms, but it seems
better to get rid of them globally.
I resisted the temptation to back-patch this change into all active
branches, but it seems appropriate to back-patch as far as 9.2 so that
there will not be performance regressions of the kind shown in this bug.
Views which are marked as security_barrier must have their quals
applied before any user-defined quals are called, to prevent
user-defined functions from being able to see rows which the
security barrier view is intended to prevent them from seeing.
Remove the restriction on security barrier views being automatically
updatable by adding a new securityQuals list to the RTE structure
which keeps track of the quals from security barrier views at each
level, independently of the user-supplied quals. When RTEs are
later discovered which have securityQuals populated, they are turned
into subquery RTEs which are marked as security_barrier to prevent
any user-supplied quals being pushed down (modulo LEAKPROOF quals).
Dean Rasheed, reviewed by Craig Ringer, Simon Riggs, KaiGai Kohei
Until now, when executing an aggregate function as a window function
within a window with moving frame start (that is, any frame start mode
except UNBOUNDED PRECEDING), we had to recalculate the aggregate from
scratch each time the frame head moved. This patch allows an aggregate
definition to include an alternate "moving aggregate" implementation
that includes an inverse transition function for removing rows from
the aggregate's running state. As long as this can be done successfully,
runtime is proportional to the total number of input rows, rather than
to the number of input rows times the average frame length.
This commit includes the core infrastructure, documentation, and regression
tests using user-defined aggregates. Follow-on commits will update some
of the built-in aggregates to use this feature.
David Rowley and Florian Pflug, reviewed by Dean Rasheed; additional
hacking by me
The original coding of EquivalenceClasses didn't foresee that appendrel
child relations might themselves be appendrels; but this is possible for
example when a UNION ALL subquery scans a table with inheritance children.
The oversight led to failure to optimize ordering-related issues very well
for the grandchild tables. After some false starts involving explicitly
flattening the appendrel representation, we found that this could be fixed
easily by removing a few implicit assumptions about appendrel parent rels
not being children themselves.
Kyotaro Horiguchi and Tom Lane, reviewed by Noah Misch
The previous method was overly complex and underly correct; in particular,
by assigning the default value with PGC_S_OVERRIDE, it prevented later
attempts to change the setting in postgresql.conf, as noted by Jeff Janes.
We should just assign the default value with source PGC_S_DYNAMIC_DEFAULT,
which will have the desired priority relative to the boot_val as well as
user-set values.
There is still a gap in this method: if there's an explicit assignment of
effective_cache_size = -1 in the postgresql.conf file, and that assignment
appears before shared_buffers is assigned, the code will substitute 4 times
the bootstrap default for shared_buffers, and that value will then persist
(since it will have source PGC_S_FILE). I don't see any very nice way
to avoid that though, and it's not a case to be expected in practice.
The existing comments in guc-file.l look forward to a redesign of the
DYNAMIC_DEFAULT mechanism; if that ever happens, we should consider this
case as one of the things we'd like to improve.
When pulling a "postponed" qual from a LATERAL subquery up into the quals
of an outer join, we must make sure that the postponed qual is included
in those seen by make_outerjoininfo(). Otherwise we might compute a
too-small min_lefthand or min_righthand for the outer join, leading to
"JOIN qualification cannot refer to other relations" failures from
distribute_qual_to_rels. Subtler errors in the created plan seem possible,
too, if the extra qual would only affect join ordering constraints.
Per bug #9041 from David Leverton. Back-patch to 9.3.
Fix integer overflow issue noted by Magnus Hagander, as well as a bunch
of other infelicities in commit ee1e5662d8
and its unreasonably large number of followups.
Previously the presence of a nextval() prevented the
use of batch-mode COPY. This patch introduces a
special case just for nextval() functions. In future
we will introduce a general case solution for
labelling volatile functions as safe for use.
We don't need make_restrictinfo_from_bitmapqual() anymore at all.
generate_bitmap_or_paths() doesn't need to be exported, and we can
drop its rather klugy restriction_only flag.
It's possible to extract a restriction OR clause from a join clause that
has the form of an OR-of-ANDs, if each sub-AND includes a clause that
mentions only one specific relation. While PG has been aware of that idea
for many years, the code previously only did it if it could extract an
indexable OR clause. On reflection, though, that seems a silly limitation:
adding a restriction clause can be a win by reducing the number of rows
that have to be filtered at the join step, even if we have to test the
clause as a plain filter clause during the scan. This should be especially
useful for foreign tables, where the change can cut the number of rows that
have to be retrieved from the foreign server; but testing shows it can win
even on local tables. Per a suggestion from Robert Haas.
As a heuristic, I made the code accept an extracted restriction clause
if its estimated selectivity is less than 0.9, which will probably result
in accepting extracted clauses just about always. We might need to tweak
that later based on experience.
Since the code no longer has even a weak connection to Path creation,
remove orindxpath.c and create a new file optimizer/util/orclauses.c.
There's some additional janitorial cleanup of now-dead code that needs
to happen, but it seems like that's a fit subject for a separate commit.
This patch introduces generic support for ordered-set and hypothetical-set
aggregate functions, as well as implementations of the instances defined in
SQL:2008 (percentile_cont(), percentile_disc(), rank(), dense_rank(),
percent_rank(), cume_dist()). We also added mode() though it is not in the
spec, as well as versions of percentile_cont() and percentile_disc() that
can compute multiple percentile values in one pass over the data.
Unlike the original submission, this patch puts full control of the sorting
process in the hands of the aggregate's support functions. To allow the
support functions to find out how they're supposed to sort, a new API
function AggGetAggref() is added to nodeAgg.c. This allows retrieval of
the aggregate call's Aggref node, which may have other uses beyond the
immediate need. There is also support for ordered-set aggregates to
install cleanup callback functions, so that they can be sure that
infrastructure such as tuplesort objects gets cleaned up.
In passing, make some fixes in the recently-added support for variadic
aggregates, and make some editorial adjustments in the recent FILTER
additions for aggregates. Also, simplify use of IsBinaryCoercible() by
allowing it to succeed whenever the target type is ANY or ANYELEMENT.
It was inconsistent that it dealt with other polymorphic target types
but not these.
Atri Sharma and Andrew Gierth; reviewed by Pavel Stehule and Vik Fearing,
and rather heavily editorialized upon by Tom Lane
Fix an oversight in commit b3aaf9081a: we do
indeed need to process the planner's append_rel_list when copying RTE
subqueries, because if any of them were flattenable UNION ALL subqueries,
the append_rel_list shows which subquery RTEs were pulled up out of which
other ones. Without this, UNION ALL subqueries aren't correctly inserted
into the update plans for inheritance child tables after the first one,
typically resulting in no update happening for those child table(s).
Per report from Victor Yegorov.
Experimentation with this case also exposed a fault in commit
a7b965382c: if an inherited UPDATE/DELETE
was proven totally dummy by constraint exclusion, we might arrive at
add_rtes_to_flat_rtable with root->simple_rel_array being NULL. This
should be interpreted as not having any RelOptInfos. I chose to code
the guard as a check against simple_rel_array_size, so as to also
provide some protection against indexing off the end of the array.
Back-patch to 9.2 where the faulty code was added.
An expression such as WHERE (... x IN (SELECT ...) ...) IN (SELECT ...)
could produce an invalid plan that results in a crash at execution time,
if the planner attempts to flatten the outer IN into a semi-join.
This happens because convert_testexpr() was not expecting any nested
SubLinks and would wrongly replace any PARAM_SUBLINK Params belonging
to the inner SubLink. (I think the comment denying that this case could
happen was wrong when written; it's certainly been wrong for quite a long
time, since very early versions of the semijoin flattening logic.)
Per report from Teodor Sigaev. Back-patch to all supported branches.
Although user-defined relations can't be directly created in
pg_catalog, it's possible for them to end up there, because you can
create them in some other schema and then use ALTER TABLE .. SET SCHEMA
to move them there. Previously, such relations couldn't afterwards
be manipulated, because IsSystemRelation()/IsSystemClass() rejected
all attempts to modify objects in the pg_catalog schema, regardless
of their origin. With this patch, they now reject only those
objects in pg_catalog which were created at initdb-time, allowing
most operations on user-created tables in pg_catalog to proceed
normally.
This patch also adds new functions IsCatalogRelation() and
IsCatalogClass(), which is similar to IsSystemRelation() and
IsSystemClass() but with a slightly narrower definition: only TOAST
tables of system catalogs are included, rather than *all* TOAST tables.
This is currently used only for making decisions about when
invalidation messages need to be sent, but upcoming logical decoding
patches will find other uses for this information.
Andres Freund, with some modifications by me.
pullup_replace_vars()'s decisions about whether a pulled-up replacement
expression needs to be wrapped in a PlaceHolderVar depend on the assumption
that what looks like a Var behaves like a Var. However, if the Var is a
join alias reference, later flattening of join aliases might replace the
Var with something that's not a Var at all, and should have been wrapped.
To fix, do a forcible pass of flatten_join_alias_vars() on the subquery
targetlist before we start to copy items out of it. We'll re-run that
processing on the pulled-up expressions later, but that's harmless.
Per report from Ken Tanzer; the added regression test case is based on his
example. This bug has been there since the PlaceHolderVar mechanism was
invented, but has escaped detection because the circumstances that trigger
it are fairly narrow. You need a flattenable query underneath an outer
join, which contains another flattenable query inside a join of its own,
with a dangerous expression (a constant or something else non-strict)
in that one's targetlist.
Having seen this, I'm wondering if it wouldn't be prudent to do all
alias-variable flattening earlier, perhaps even in the rewriter.
But that would probably not be a back-patchable change.
This patch adds the ability to write TABLE( function1(), function2(), ...)
as a single FROM-clause entry. The result is the concatenation of the
first row from each function, followed by the second row from each
function, etc; with NULLs inserted if any function produces fewer rows than
others. This is believed to be a much more useful behavior than what
Postgres currently does with multiple SRFs in a SELECT list.
This syntax also provides a reasonable way to combine use of column
definition lists with WITH ORDINALITY: put the column definition list
inside TABLE(), where it's clear that it doesn't control the ordinality
column as well.
Also implement SQL-compliant multiple-argument UNNEST(), by turning
UNNEST(a,b,c) into TABLE(unnest(a), unnest(b), unnest(c)).
The SQL standard specifies TABLE() with only a single function, not
multiple functions, and it seems to require an implicit UNNEST() which is
not what this patch does. There may be something wrong with that reading
of the spec, though, because if it's right then the spec's TABLE() is just
a pointless alternative spelling of UNNEST(). After further review of
that, we might choose to adopt a different syntax for what this patch does,
but in any case this functionality seems clearly worthwhile.
Andrew Gierth, reviewed by Zoltán Böszörményi and Heikki Linnakangas, and
significantly revised by me
Formerly the planner had a hard-wired rule of thumb for guessing the amount
of space consumed by an aggregate function's transition state data. This
estimate is critical to deciding whether it's OK to use hash aggregation,
and in many situations the built-in estimate isn't very good. This patch
adds a column to pg_aggregate wherein a per-aggregate estimate can be
provided, overriding the planner's default, and infrastructure for setting
the column via CREATE AGGREGATE.
It may be that additional smarts will be required in future, perhaps even
a per-aggregate estimation function. But this is already a step forward.
This is extracted from a larger patch to improve the performance of numeric
and int8 aggregates. I (tgl) thought it was worth reviewing and committing
this infrastructure separately. In this commit, all built-in aggregates
are given aggtransspace = 0, so no behavior should change.
Hadi Moshayedi, reviewed by Pavel Stehule and Tomas Vondra
Bug #8591 from Claudio Freire demonstrates that get_eclass_for_sort_expr
must be able to compute valid em_nullable_relids for any new equivalence
class members it creates. I'd worried about this in the commit message
for db9f0e1d9a, but claimed that it wasn't a
problem because multi-member ECs should already exist when it runs. That
is transparently wrong, though, because this function is also called by
initialize_mergeclause_eclasses, which runs during deconstruct_jointree.
The example given in the bug report (which the new regression test item
is based upon) fails because the COALESCE() expression is first seen by
initialize_mergeclause_eclasses rather than process_equivalence.
Fixing this requires passing the appropriate nullable_relids set to
get_eclass_for_sort_expr, and it requires new code to compute that set
for top-level expressions such as ORDER BY, GROUP BY, etc. We store
the top-level nullable_relids in a new field in PlannerInfo to avoid
computing it many times. In the back branches, I've added the new
field at the end of the struct to minimize ABI breakage for planner
plugins. There doesn't seem to be a good alternative to changing
get_eclass_for_sort_expr's API signature, though. There probably aren't
any third-party extensions calling that function directly; moreover,
if there are, they probably need to think about what to pass for
nullable_relids anyway.
Back-patch to 9.2, like the previous patch in this area.
This change prevents us from doing inappropriate subquery flattening in
cases such as dangerous functions hidden inside a sub-SELECT in the
targetlist of another sub-SELECT. That could result in unexpected behavior
due to multiple evaluations of a volatile function, as in a recent
complaint from Etienne Dube. It's been questionable from the very
beginning whether these functions should look into subqueries (as noted in
their comments), and this case seems to provide proof that they should.
Because the new code only descends into SubLinks, not SubPlans or
InitPlans, the change only affects the planner's behavior during
prepjointree processing and not later on --- for example, you can still get
it to use a volatile function in an indexqual if you wrap the function in
(SELECT ...). That's a historical behavior, for sure, but it's reasonable
given that the executor's evaluation rules for subplans don't depend on
whether there are volatile functions inside them. In any case, we need to
constrain the behavioral change as narrowly as we can to make this
reasonable to back-patch.
Before jamming a desired targetlist into a plan node, one really ought to
make sure the plan node can handle projections, and insert a buffering
Result plan node if not. planagg.c forgot to do this, which is a hangover
from the days when it only dealt with IndexScan plan types. MergeAppend
doesn't project though, not to mention that it gets unhappy if you remove
its possibly-resjunk sort columns. The code accidentally failed to fail
for cases in which the min/max argument was a simple Var, because the new
targetlist would be equivalent to the original "flat" tlist anyway.
For any more complex case, it's been broken since 9.1 where we introduced
the ability to optimize min/max using MergeAppend, as reported by Raphael
Bauduin. Fix by duplicating the logic from grouping_planner that decides
whether we need a Result node.
In 9.2 and 9.1, this requires back-porting the tlist_same_exprs() function
introduced in commit 4387cf956b, else we'd
uselessly add a Result node in cases that worked before. It's rather
tempting to back-patch that whole commit so that we can avoid extra Result
nodes in mainline cases too; but I'll refrain, since that code hasn't
really seen all that much field testing yet.
These things didn't work because the planner omitted to do the necessary
preprocessing of a WindowFunc's argument list. Add the few dozen lines
of code needed to handle that.
Although this sounds like a feature addition, it's really a bug fix because
the default-argument case was likely to crash previously, due to lack of
checking of the number of supplied arguments in the built-in window
functions. It's not a security issue because there's no way for a
non-superuser to create a window function definition with defaults that
refers to a built-in C function, but nonetheless people might be annoyed
that it crashes rather than producing a useful error message. So
back-patch as far as the patch applies easily, which turns out to be 9.2.
I'll put a band-aid in earlier versions as a separate patch.
(Note that these features still don't work for aggregates, and fixing that
case will be harder since we represent aggregate arg lists as target lists
not bare expression lists. There's no crash risk though because CREATE
AGGREGATE doesn't accept defaults, and we reject named-argument notation
when parsing an aggregate call.)
Constant quals aren't handled the same way they used to be. Also,
add mention of a couple more major steps in grouping_planner.
Per complaint a couple months back from Etsuro Fujita.
