This commit adds the amount of time spent sleeping due to
cost-based delay to the pg_stat_progress_vacuum and
pg_stat_progress_analyze system views. A new configuration
parameter named track_cost_delay_timing, which is off by default,
controls whether this information is gathered. For vacuum, the
reported value includes the sleep time of any associated parallel
workers. However, parallel workers only report their sleep time
once per second to avoid overloading the leader process.
Bumps catversion.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Co-authored-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Sami Imseih <samimseih@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Masahiro Ikeda <ikedamsh@oss.nttdata.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Sergei Kornilov <sk@zsrv.org>
Discussion: https://postgr.es/m/ZmaXmWDL829fzAVX%40ip-10-97-1-34.eu-west-3.compute.internal
Follow locking behavior of ANALYZE when importing statistics. In
particular, when importing index statistics, the table must be locked
in ShareUpdateExclusive mode. Fixes bug reportd by Jian He.
ANALYZE doesn't update statistics on partitioned indexes, and the
locking requirements are slightly different for in-place updates on
partitioned indexes versus normal indexes. To be conservative, lock
both the partitioned table and the partitioned index in
ShareUpdateExclusive mode when importing stats for a partitioned
index.
Author: Corey Huinker
Reported-by: Jian He
Reviewed-by: Michael Paquier
Discussion: https://www.postgresql.org/message-id/CACJufxGreTY7qsCV8%2BBkuv0p5SXGTScgh%3DD%2BDq6%3D%2B_%3DXTp7FWg%40mail.gmail.com
On machines where char is unsigned this could lead to option parsing looping
endlessly. It's also too narrow a type on other hardware.
Found via Tom Lane's monitoring of the buildfarm.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Security: CVE-2025-1094
Backpatch-through: 13
As highlighted by the prior commit, writing correct escape functions is less
trivial than one might hope.
This test module tries to verify that different escaping functions behave
reasonably. It e.g. tests:
- Invalidly encoded input to an escape function leads to invalidly encoded
output
- Trailing incomplete multi-byte characters are handled sensibly
- Escaped strings are parsed as single statement by psql's parser (which
derives from the backend parser)
There are further tests that would be good to add. But even in the current
state it was rather useful for writing the fix in the prior commit.
Reviewed-by: Noah Misch <noah@leadboat.com>
Backpatch-through: 13
Security: CVE-2025-1094
There are cases where we cannot / do not want to error out for invalidly
encoded input. In such cases it can be useful to replace e.g. an incomplete
multi-byte characters with bytes that will trigger an error when getting
validated as part of a larger string.
Unfortunately, until now, for some encoding no such sequence existed. For
those encodings this commit removes one previously accepted input combination
- we consider that to be ok, as the chosen bytes are outside of the valid
ranges for the encodings, we just previously failed to detect that.
As we cannot add a new field to pg_wchar_table without breaking ABI, this is
implemented "in-line" in the newly added function.
Author: Noah Misch <noah@leadboat.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Backpatch-through: 13
Security: CVE-2025-1094
This unifies the output used should any differences be found in the
files provided, information that 027_stream_regress did not show on
failures. TAP tests of pg_combinebackup and pg_upgrade now rely on the
refactored routine, reducing the dependency to the diff command. The
callers of this routine can optionally specify a custom line-comparison
function.
There are a couple of tests that still use directly a diff command:
001_pg_bsd_indent, 017_shm and test_json_parser's 003. These rely on
different properties and are left out for now.
Extracted from a larger patch by the same author.
Author: Ashutosh Bapat
Discussion: https://postgr.es/m/Z6RQS-tMzGYjlA-H@paquier.xyz
This adds a new variant of generated columns that are computed on read
(like a view, unlike the existing stored generated columns, which are
computed on write, like a materialized view).
The syntax for the column definition is
... GENERATED ALWAYS AS (...) VIRTUAL
and VIRTUAL is also optional. VIRTUAL is the default rather than
STORED to match various other SQL products. (The SQL standard makes
no specification about this, but it also doesn't know about VIRTUAL or
STORED.) (Also, virtual views are the default, rather than
materialized views.)
Virtual generated columns are stored in tuples as null values. (A
very early version of this patch had the ambition to not store them at
all. But so much stuff breaks or gets confused if you have tuples
where a column in the middle is completely missing. This is a
compromise, and it still saves space over being forced to use stored
generated columns. If we ever find a way to improve this, a bit of
pg_upgrade cleverness could allow for upgrades to a newer scheme.)
The capabilities and restrictions of virtual generated columns are
mostly the same as for stored generated columns. In some cases, this
patch keeps virtual generated columns more restricted than they might
technically need to be, to keep the two kinds consistent. Some of
that could maybe be relaxed later after separate careful
considerations.
Some functionality that is currently not supported, but could possibly
be added as incremental features, some easier than others:
- index on or using a virtual column
- hence also no unique constraints on virtual columns
- extended statistics on virtual columns
- foreign-key constraints on virtual columns
- not-null constraints on virtual columns (check constraints are supported)
- ALTER TABLE / DROP EXPRESSION
- virtual column cannot have domain type
- virtual columns are not supported in logical replication
The tests in generated_virtual.sql have been copied over from
generated_stored.sql with the keyword replaced. This way we can make
sure the behavior is mostly aligned, and the differences can be
visible. Some tests for currently not supported features are
currently commented out.
Reviewed-by: Jian He <jian.universality@gmail.com>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Tested-by: Shlok Kyal <shlok.kyal.oss@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/a368248e-69e4-40be-9c07-6c3b5880b0a6@eisentraut.org
This commit introduces changes to track unpruned relations explicitly,
making it possible for top-level plan nodes, such as ModifyTable and
LockRows, to avoid processing partitions pruned during initial
pruning. Scan-level nodes, such as Append and MergeAppend, already
avoid the unnecessary processing by accessing partition pruning
results directly via part_prune_index. In contrast, top-level nodes
cannot access pruning results directly and need to determine which
partitions remain unpruned.
To address this, this commit introduces a new bitmapset field,
es_unpruned_relids, which the executor uses to track the set of
unpruned relations. This field is referenced during plan
initialization to skip initializing certain nodes for pruned
partitions. It is initialized with PlannedStmt.unprunableRelids,
a new field that the planner populates with RT indexes of relations
that cannot be pruned during runtime pruning. These include relations
not subject to partition pruning and those required for execution
regardless of pruning.
PlannedStmt.unprunableRelids is computed during set_plan_refs() by
removing the RT indexes of runtime-prunable relations, identified
from PartitionPruneInfos, from the full set of relation RT indexes.
ExecDoInitialPruning() then updates es_unpruned_relids by adding
partitions that survive initial pruning.
To support this, PartitionedRelPruneInfo and PartitionedRelPruningData
now include a leafpart_rti_map[] array that maps partition indexes to
their corresponding RT indexes. The former is used in set_plan_refs()
when constructing unprunableRelids, while the latter is used in
ExecDoInitialPruning() to convert partition indexes returned by
get_matching_partitions() into RT indexes, which are then added to
es_unpruned_relids.
These changes make it possible for ModifyTable and LockRows nodes to
process only relations that remain unpruned after initial pruning.
ExecInitModifyTable() trims lists, such as resultRelations,
withCheckOptionLists, returningLists, and updateColnosLists, to
consider only unpruned partitions. It also creates ResultRelInfo
structs only for these partitions. Similarly, child RowMarks for
pruned relations are skipped.
By avoiding unnecessary initialization of structures for pruned
partitions, these changes improve the performance of updates and
deletes on partitioned tables during initial runtime pruning.
Due to ExecInitModifyTable() changes as described above, EXPLAIN on a
plan for UPDATE and DELETE that uses runtime initial pruning no longer
lists partitions pruned during initial pruning.
Reviewed-by: Robert Haas <robertmhaas@gmail.com> (earlier versions)
Reviewed-by: Tomas Vondra <tomas@vondra.me>
Discussion: https://postgr.es/m/CA+HiwqFGkMSge6TgC9KQzde0ohpAycLQuV7ooitEEpbKB0O_mg@mail.gmail.com
The CI has reported that using a marker to force the output of the
detach step to happen after the wait step was not enough, as
isolationtester has managed to report the detach step as waiting before
the wait step finishes in some runs.
src/test/isolation/README tells that there is a more drastic method to
enforce the ordering of the output: an empty step positioned just after
the wait step can force the wait step to complete before the detach step
begins. This method has been able to pass 10 runs in the CI here, while
HEAD seems to fail 15~20% of the time in the CF bot.
Discussion: https://postgr.es/m/Z6WO8FbqK_FHmrzC@paquier.xyz
Three tests in the main regression test suite are proving to not be
portable across multiple runs on a deployed cluster as stats of
pg_stat_io are reset. Problems happen for tests on:
- Writes of WAL in the init context, when creating a WAL segment.
- Syncs of WAL in the init context, when creating a WAL segment.
- Reads of WAL in the normal context, requiring a WAL record to be read.
For a `make check`, this could rely on the checkpoint record read by the
startup process when starting the cluster, something that is not going
to work for a deployed node.
Two of the three tests are moved to the recovery TAP test
029_stats_restart, where we already check the consistency of stats
data. The test for syncs is dropped as TAP can run with fsync=off. The
other two are checked with some data from a freshly-initialized cluster.
Per discussion with Tom Lane, Bertrand Drouvot and Nazir Bilal Yavuz.
Discussion: https://postgr.es/m/915687.1738780322@sss.pgh.pa.us
This didn't actually work: the COPY succeeds, but the FREEZE
optimization isn't applied. There doesn't seem to be an easy way
to support FREEZE on foreign tables, so let's follow the precedent
established by commit 5c9a5513a3 by raising an error early. This
is arguably a bug fix, but due to the lack of reports, the minimal
discussion on the mailing list, and the potential to break existing
scripts, I am not back-patching it for now.
Author: Sami Imseih <samimseih@gmail.com>
Reviewed-by: Zhang Mingli <zmlpostgres@gmail.com>
Discussion: https://postgr.es/m/CAA5RZ0ujeNgKpE3OrLtR%3DeJGa5LkGMekFzQTwjgw%3DrzaLufQLQ%40mail.gmail.com
This test has been disabled in 9f00edc228 due to an instable expected
output, where it would be possible for the wait step to report its
result after the detach step is done. The expected output was ordered
so as the detach would always report last.
Isolation test permutations have the option to use markers to control
the ordering for cases like this one, as documented in
src/test/isolation/README. The permutation is enabled once again, this
time with a marker added so as the detach step reports only once the
wait step has finished, ensuring a correct output ordering.
Reviewed-by: Bertrand Drouvot
Discussion: https://postgr.es/m/Z6MBZTX5EqQ6A8Zc@paquier.xyz
If exactly one relation type is requested in a command of the \dtisv
family, say "tables", "indexes", etc instead of "relations". This
should cover the majority of actual uses, without creating a huge
number of new translatable strings. The error messages for no
matching relations are adjusted as well.
In passing, invent "pg_log_error_internal()" to be used for frontend
error messages that don't seem to need translation, analogously to
errmsg_internal() in the backend. The implementation is a bit cheesy,
being just a macro to prevent xgettext from recognizing a trigger
keyword. This won't avoid a useless gettext lookup cycle at runtime
--- but surely we don't care about an extra microsecond or two in
what's supposed to be a can't-happen case. I (tgl) also made
"pg_fatal_internal()", though it's not used in this patch.
Author: Greg Sabino Mullane <htamfids@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAKAnmm+7o93fQV-RFkGaN1QnP-0D4d3JTykD+cLueqjDMKdfag@mail.gmail.com
This is required to ensure correct test dependencies, previously
the test binaries would not necessarily be built.
The missing dependency was, e.g., visible when doing
ninja clean && ninja meson-test-prereq && m test --no-rebuild --suite setup --suite test_json_parser
Apply this to all branches with meson support, as part of an effort to fix
incorrect test dependencies that can lead to test failures.
Author: Peter Eisentraut <peter@eisentraut.org>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CAGECzQSvM3iSDmjF+=Kof5an6jN8UbkP_4cKKT9w6GZavmb5yQ@mail.gmail.com
Discussion: https://postgr.es/m/bdba588f-69a9-4f3e-9b95-62d07210a32e@eisentraut.org
Backpatch: 17-, where test_json_parser was added
This commit allows transformation of OR-clauses into SAOP's for index scans
within nested loop joins. That required the following changes.
1. Make match_orclause_to_indexcol() and group_similar_or_args() understand
const-ness in the same way as match_opclause_to_indexcol(). This
generally makes our approach more uniform.
2. Make match_join_clauses_to_index() pass OR-clauses to
match_clause_to_index().
3. Also switch match_join_clauses_to_index() to use list_append_unique_ptr()
for adding clauses to *joinorclauses. That avoids possible duplicates
when processing the same clauses with different indexes. Previously such
duplicates were elimited in match_clause_to_index(), but now
group_similar_or_args() each time generates distinct copies of grouped
OR clauses.
Discussion: https://postgr.es/m/CAPpHfdv%2BjtNwofg-p5z86jLYZUTt6tR17Wy00ta0dL%3DwHQN3ZA%40mail.gmail.com
Reviewed-by: Andrei Lepikhov <lepihov@gmail.com>
Reviewed-by: Alena Rybakina <a.rybakina@postgrespro.ru>
Reviewed-by: Pavel Borisov <pashkin.elfe@gmail.com>
This commit adds WAL IO stats to both pg_stat_io view and per-backend IO
statistics (pg_stat_get_backend_io()). This change is possible since
f92c854cf4, as WAL IO is not counted in blocks in some code paths
where its stats data is measured (like WAL read in xlogreader.c).
IOContext gains IOCONTEXT_INIT and IOObject IOOBJECT_WAL, with the
following combinations allowed:
- IOOBJECT_WAL/IOCONTEXT_NORMAL is used to track I/O operations done on
already-created WAL segments.
- IOOBJECT_WAL/IOCONTEXT_INIT is used for tracking I/O operations done
when initializing WAL segments.
The core changes are done in pg_stat_io.c, backend statistics inherit
them. Backend statistics and pg_stat_io are now available for the WAL
writer, the WAL receiver and the WAL summarizer processes.
I/O timing data is controlled by the GUC track_io_timing, like the
existing data of pg_stat_io for consistency. The timings related to
IOOBJECT_WAL show up if the GUC is enabled (disabled by default).
Bump pgstats file version, due to the additions in IOObject and
IOContext, impacting the amount of data written for the fixed-numbered
IO stats kind in the pgstats file.
Author: Nazir Bilal Yavuz
Reviewed-by: Bertrand Drouvot, Nitin Jadhav, Amit Kapila, Michael
Paquier, Melanie Plageman, Bharath Rupireddy
Discussion: https://postgr.es/m/CAN55FZ3AiQ+ZMxUuXnBpd0Rrh1YhwJ5FudkHg=JU0P+-W8T4Vg@mail.gmail.com
A comment in pg_regress incorrectly stated that alternative
output files could be named test_{i}.out with 0 < i <= 9.
However, the valid range is actually 0 <= i <= 9.
(The user-facing docs have this right already.)
Author: Ilia Evdokimov <ilya.evdokimov@tantorlabs.com>
Discussion: https://postgr.es/m/6e6c4dea-07a1-4a83-9bb7-77b9b3324c37@tantorlabs.com
Consistently use "Size" (or size_t, or in some places int64 or double)
as the type for variables holding memory allocation sizes. In most
places variables' data types were fine already, but we had an ancient
habit of computing bytes from kilobytes-units GUCs with code like
"work_mem * 1024L". That risks overflow on Win64 where they did not
make "long" as wide as "size_t". We worked around that by restricting
such GUCs' ranges, so you couldn't set work_mem et al higher than 2GB
on Win64. This patch removes that restriction, after replacing such
calculations with "work_mem * (Size) 1024" or variants of that.
It should be noted that this patch was constructed by searching
outwards from the GUCs that have MAX_KILOBYTES as upper limit.
So I can't positively guarantee there are no other places doing
memory-size arithmetic in int or long variables. I do however feel
pretty confident that increasing MAX_KILOBYTES on Win64 is safe now.
Also, nothing in our code should be dealing in multiple-gigabyte
allocations without authorization from a relevant GUC, so it seems
pretty likely that this search caught everything that could be at
risk of overflow.
Author: Vladlen Popolitov <v.popolitov@postgrespro.ru>
Co-authored-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/1a01f0-66ec2d80-3b-68487680@27595217
Prior to this patch, the require_auth implementation assumed that
the AuthenticationSASL protocol message was using SCRAM-SHA-256.
In preparation for future SASL mechanisms, like OAUTHBEARER, split
the implementation into two tiers: the first checks the acceptable
AUTH_REQ_* codes, and the second checks acceptable mechanisms if
AUTH_REQ_SASL et.al are permitted.
conn->allowed_sasl_mechs contains a list of pointers to acceptable
mechanisms, and pg_SASL_init() will bail if the selected mechanism
isn't contained in this array.
Since there's only one mechansism supported right now, one branch
of the second tier cannot be exercised yet and is protected by an
Assert(false) call. This assertion will need to be removed when
the next mechanism is added.
This patch is extracted from a larger body of work aimed at adding
support for OAUTHBEARER in libpq.
Author: Jacob Champion <jacob.champion@enterprisedb.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/CAOYmi+kJqzo6XsR9TEhvVfeVNQ-TyFM5LATypm9yoQVYk=4Wrw@mail.gmail.com
Once a replication slot is invalidated, it cannot be altered or used to
fetch changes. However, a process could still acquire an invalid slot and
fail later.
For example, if a process acquires a logical slot that was invalidated due
to wal_removed, it will eventually fail in CreateDecodingContext() when
attempting to access the removed WAL. Similarly, for physical replication
slots, even if the slot is invalidated and invalidation_reason is set to
wal_removed, the walsender does not currently check for invalidation when
starting physical replication. Instead, replication starts, and an error
is only reported later while trying to access WAL. Similarly, we prohibit
modifying slot properties for invalid slots but give the error for the
same after acquiring the slot.
This patch improves error handling by detecting invalid slots earlier at
the time of slot acquisition which is the first step. This also helped in
unifying different ERROR messages at different places and gave a
consistent message for invalid slots. This means that the message for
invalid slots will change to a generic message.
This will also be helpful for future patches where we are planning to
invalidate slots due to more reasons like idle_timeout because we don't
have to modify multiple places in such cases and avoid the chances of
missing out on a particular place.
Author: Nisha Moond <nisha.moond412@gmail.com>
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Vignesh C <vignesh21@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/CABdArM6pBL5hPnSQ+5nEVMANcF4FCH7LQmgskXyiLY75TMnKpw@mail.gmail.com
The following functions were not covered by any tests:
- abbrev(inet)
- set_masklen(cidr)
- set_masklen(inet)
- netmask(inet)
- hostmask(inet)
While on it, this improves the output of some of the existing queries in
the test inet to use better aliases.
Author: Aleksander Alekseev
Reviewed-by: Jacob Champion, Keisuke Kuroda, Tom Lane
Discussion: https://postgr.es/m/CAJ7c6TOyZ9bGNrDK6Z3Q0gr9ow8ZpOm+=+01mpE0dsdH4C+u9A@mail.gmail.com
This commit adds four fields to the statistics of relations, aggregating
the amount of time spent for each operation on a relation:
- total_vacuum_time, for manual vacuum.
- total_autovacuum_time, for vacuum done by the autovacuum daemon.
- total_analyze_time, for manual analyze.
- total_autoanalyze_time, for analyze done by the autovacuum daemon.
This gives users the option to derive the average time spent for these
operations with the help of the related "count" fields.
Bump catalog version (for the catalog changes) and PGSTAT_FILE_FORMAT_ID
(for the additions in PgStat_StatTabEntry).
Author: Sami Imseih
Reviewed-by: Bertrand Drouvot, Michael Paquier
Discussion: https://postgr.es/m/CAA5RZ0uVOGBYmPEeGF2d1B_67tgNjKx_bKDuL+oUftuoz+=Y1g@mail.gmail.com
A ParseState exists in ATPrepAlterColumnType() since its introduction
in 077db40fa1, and it has never relied on a query string that could be
used to point at a location in the origin string on error.
The output of some regression tests are updated, showing the error
location where applicable. Six error strings are upgraded with the
error location.
Author: Jian He
Discussion: https://postgr.es/m/CACJufxGfbPfWLjcEz33G9eW_epDW0UDi2H05i9eSTPKGJ4rxSA@mail.gmail.com
Most executables already get that testing. To occupy the customary
001_basic.pl name, this renumbers the new-in-October tests of
src/test/postmaster/t.
Reviewed by Thomas Munro.
Discussion: https://postgr.es/m/20241215022701.a1.nmisch@google.com
For commit b663b9436e I thought this was useless, but turns out not to
be for the case where a partitioned table has two identical foreign key
constraints which can both be matched by the same constraint in a
partition during attach. This CCI makes the match search for the second
constraint in the parent ignore the constraint in the child that has
already been matched by the first constraint in the parent.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/c599253c-1ccd-4161-80fc-c9065e037a09@gmail.com
The right mix of DDL and VACUUM could corrupt a catalog page header such
that PageIsVerified() durably fails, requiring a restore from backup.
This affects only catalogs that both have a syscache and have DDL code
that uses syscache tuples to construct updates. One of the test
permutations shows a variant not yet fixed.
This makes !TransactionIdIsValid(TM_FailureData.xmax) possible with
TM_Deleted. I think core and PGXN are indifferent to that.
Per bug #17821 from Alexander Lakhin. Back-patch to v13 (all supported
versions). The test case is v17+, since it uses INJECTION_POINT.
Discussion: https://postgr.es/m/17821-dd8c334263399284@postgresql.org
Directory "injection_points" has specified NO_INSTALLCHECK since before
commit c35f419d6e added the specs, but
that commit neglected to disable the corresponding meson runningcheck.
The alternative would be to enable "make installcheck" for ISOLATION,
but the GNU make build system lacks a concept of setting NO_INSTALLCHECK
for REGRESS without also setting it for ISOLATION. Back-patch to v17,
where that commit first appeared, to avoid surprises when back-patching
additional specs.
Discussion: https://postgr.es/m/17821-dd8c334263399284@postgresql.org
Useful for caseless matching. Similar to LOWER(), but avoids edge-case
problems with using LOWER() for caseless matching.
For collations that support it, CASEFOLD() handles characters with
more than two case variations or multi-character case variations. Some
characters may fold to uppercase. The results of case folding are also
more stable across Unicode versions than LOWER() or UPPER().
Discussion: https://postgr.es/m/a1886ddfcd8f60cb3e905c93009b646b4cfb74c5.camel%40j-davis.com
Reviewed-by: Ian Lawrence Barwick
Formerly, these cases threw an error "cannot cast jsonb null to type
<whatever>". That seems less than helpful though. It's also
inconsistent with the behavior of the ->> operator, which translates
JSON null to SQL NULL, as do some other jsonb functions.
Discussion: https://postgr.es/m/3851203.1722552717@sss.pgh.pa.us
With deferred triggers, it is possible that the current role changes
between the time when the trigger is queued and the time it is
executed (for example, the triggering data modification could have
been executed in a SECURITY DEFINER function).
Up to now, deferred trigger functions would run with the current role
set to whatever was active at commit time. That does not matter for
foreign-key constraints, whose correctness doesn't depend on the
current role. But for user-written triggers, the current role
certainly can matter.
Hence, fix things so that AFTER triggers are fired under the role
that was active when they were queued, matching the behavior of
BEFORE triggers which would have actually fired at that time.
(If the trigger function is marked SECURITY DEFINER, that of course
overrides this, as it always has.)
This does not create any new security exposure: if you do DML on a
table owned by a hostile user, that user has always had various ways
to exploit your permissions, such as the aforementioned BEFORE
triggers, default expressions, etc. It might remove some security
exposure, because the old behavior could potentially expose some
other role besides the one directly modifying the table.
There was discussion of making a larger change, such as running as
the trigger's owner. However, that would break the common idiom of
capturing the value of CURRENT_USER in a trigger for auditing/logging
purposes. This change will make no difference in the typical scenario
where the current role doesn't change before commit.
Arguably this is a bug fix, but it seems too big a semantic change
to consider for back-patching.
Author: Laurenz Albe <laurenz.albe@cybertec.at>
Reviewed-by: Joseph Koshakow <koshy44@gmail.com>
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Discussion: https://postgr.es/m/77ee784cf248e842f74588418f55c2931e47bd78.camel@cybertec.at
This feature was intentionally omitted when FKs were first implemented
for partitioned tables, and had been requested a few times; the
usefulness is clear.
Validation can happen for each partition individually, which is useful
to contain the number of locks held and the duration; or it can be
executed for the partitioning hierarchy as a single command, which
validates all child constraints that haven't been validated already.
This is also useful to implement NOT ENFORCED constraints on top.
Author: Amul Sul <sulamul@gmail.com>
Discussion: https://postgr.es/m/CAAJ_b96Bp=-ZwihPPtuaNX=SrZ0U6ZsXD3+fgARO0JuKa8v2jQ@mail.gmail.com
The current boolean publish_generated_columns option only supports a
binary choice, which is insufficient for future enhancements where
generated columns can be of different types (e.g., stored or virtual). The
supported values for the publish_generated_columns option are 'none' and
'stored'.
Author: Vignesh C <vignesh21@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/d718d219-dd47-4a33-bb97-56e8fc4da994@eisentraut.org
Discussion: https://postgr.es/m/B80D17B2-2C8E-4C7D-87F2-E5B4BE3C069E@gmail.com
We've long had roman-numeral output support in to_char(),
but lacked the reverse conversion. Here it is.
Author: Hunaid Sohail <hunaidpgml@gmail.com>
Reviewed-by: Maciek Sakrejda <m.sakrejda@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Tomas Vondra <tomas@vondra.me>
Discussion: https://postgr.es/m/CAMWA6ybh4M1VQqpmnu2tfSwO+3gAPeA8YKnMHVADeB=XDEvT_A@mail.gmail.com
Some additional tests have been created during the development of
virtual generated columns (not included here). This commit adds
equivalent tests to the existing test set for stored generated
columns. This includes expanded tests related to MERGE, subqueries,
whole-row references, permissions, domains, partitioning, and
triggers.
Author: Peter Eisentraut <peter@eisentraut.org>
Co-authored-by: jian he <jian.universality@gmail.com>
Co-authored-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/a368248e-69e4-40be-9c07-6c3b5880b0a6@eisentraut.org
This commit rewrites a good chunk of the command arrays in TAP tests
with a grammar based on the following rules:
- Fat commas are used between option names and their values, making it
clear to both humans and perltidy that values and names are bound
together. This is particularly useful for the readability of multi-line
command arrays, and there are plenty of them in the TAP tests. Most of
the test code is updated to use this style. Some commands used
parenthesis to show the link, or attached values and options in a single
string. These are updated to use fat commas instead.
- Option names are switched to use their long names, making them more
self-documented. Based on a suggestion by Andrew Dunstan.
- Add some trailing commas after the last item in multi-line arrays,
which is a common perl style.
Not all the places are taken care of, but this covers a very good chunk
of them.
Author: Dagfinn Ilmari Mannsåker
Reviewed-by: Michael Paquier, Peter Smith, Euler Taveira
Discussion: https://postgr.es/m/87jzc46d8u.fsf@wibble.ilmari.org
A follow-up patch will adjust the TAP tests to follow a more-structured
format for option lists in commands, that perltidy is able to cope
better with. Putting the tree first in a clean state makes the next
change a bit easier. v20230309 has been used.
Author: Dagfinn Ilmari Mannsåker
Discussion: https://postgr.es/m/87jzc46d8u.fsf@wibble.ilmari.org
Most were introduced in the 17 timeframe. The ones in wparser_def.c are
very old.
I also changed "JSON path expression for column \"%s\" should return
single item without wrapper" to "JSON path expression for column \"%s\"
must return single item when no wrapper is requested" to avoid
ambiguity.
Backpatch to 17.
Crickets: https://postgr.es/m/202501131819.26ors7oouafu@alvherre.pgsql
In common cases, foreign keys are defined on the toplevel partitioned
table; but if instead one is defined on a partition and references a
partitioned table, and the referencing partition is detached, we would
examine the pg_constraint row on the partition being detached, and fail
to realize that the sub-constraints must be left alone. This causes the
ALTER TABLE DETACH process to fail with
ERROR: could not find ON INSERT check triggers of foreign key constraint NNN
This is similar but not quite the same as what was fixed by
53af9491a0. This bug doesn't affect branches earlier than 15, because
the detach procedure was different there, so we only backpatch down to
15.
Fix by skipping such modifying constraints that are children of other
constraints being detached.
Author: Amul Sul <sulamul@gmail.com>
Diagnosys-by: Sami Imseih <samimseih@gmail.com>
Discussion: https://postgr.es/m/CAAJ_b97GuPh6wQPbxQS-Zpy16Oh+0aMv-w64QcGrLhCOZZ6p+g@mail.gmail.com
If a referenced UPDATE changes the temporal start/end times, shrinking
the span the row is valid, we get a false return from
ri_Check_Pk_Match(), but overlapping references may still be valid, if
their reference didn't overlap with the removed span.
We need to consider what span(s) are still provided in the referenced
table. Instead of returning that from ri_Check_Pk_Match(), we can
just look it up in the main SQL query.
Reported-by: Sam Gabrielsson <sam@movsom.se>
Author: Paul Jungwirth <pj@illuminatedcomputing.com>
Discussion: https://www.postgresql.org/message-id/flat/CA+renyUApHgSZF9-nd-a0+OPGharLQLO=mDHcY4_qQ0+noCUVg@mail.gmail.com
The test table names gtest11s and gtest12s were way originally chosen
to signify "stored", when the idea was to have virtual columns in the
same test file. This is no longer the idea, so this naming is
irrelevant. (The upcoming feature of virtual generated columns will
have a test file that is initially a copy of generated_stored.sql, and
this random difference will be even more annoying then.) Clean this
up by dropping the suffix.
Discussion: https://www.postgresql.org/message-id/flat/a368248e-69e4-40be-9c07-6c3b5880b0a6@eisentraut.org
The freshly-released 2025a version of tzdata has a refined estimate
for the longitude of Manila, changing their value for LMT in
pre-standardized-timezone days. This changes the output of one of
our test cases. Since we need to be able to run with system tzdata
files that may or may not contain this update, we'd better stop
making that specific test.
I switched it to use Asia/Singapore, which has a roughly similar UTC
offset. That LMT value hasn't changed in tzdb since 2003, so we can
hope that it's well established.
I also noticed that this set of make_timestamptz tests only exercises
zones east of Greenwich, which seems rather sad, and was not the
original intent AFAICS. (We've already changed these tests once
to stabilize their results across tzdata updates, cf 66b737cd9;
it looks like I failed to consider the UTC-offset-sign aspect then.)
To improve that, add a test with Pacific/Honolulu. That LMT offset
is also quite old in tzdb, so we'll cross our fingers that it doesn't
get improved.
Reported-by: Christoph Berg <cb@df7cb.de>
Discussion: https://postgr.es/m/Z46inkznCxesvDEb@msg.df7cb.de
Backpatch-through: 13
XLogPageRead() checks immediately for an invalid WAL record header on a
standby, to be able to handle the case of continuation records that need
to be read across two different sources. As written, the check was too
generic, applying to any target LSN. Based on an analysis by Kyotaro
Horiguchi, what really matters is to make sure that the page header is
checked when attempting to read a LSN at the boundary of a segment, to
handle the case of a continuation record that spawns across multiple
pages when dealing with multiple segments, as WAL receivers are spawned
they request WAL from the beginning of a segment. This fix has been
proposed by Kyotaro Horiguchi.
This could cause standbys to loop infinitely when dealing with a
continuation record during a timeline jump, in the case where the
contents of the record in the follow-up page are invalid.
Some regression tests are added to check such scenarios, able to
reproduce the original problem. In the test, the contents of a
continuation record are overwritten with junk zeros on its follow-up
page, and replayed on standbys. This is inspired by 039_end_of_wal.pl,
and is enough to show how standbys should react on promotion by not
being stuck. Without the fix, the test would fail with a timeout. The
test to reproduce the problem has been written by Alexander Kukushkin.
The original check has been introduced in 0668719801, for a similar
problem.
Author: Kyotaro Horiguchi, Alexander Kukushkin
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CAFh8B=mozC+e1wGJq0H=0O65goZju+6ab5AU7DEWCSUA2OtwDg@mail.gmail.com
Backpatch-through: 13
