Until now __attribute__() was defined to be empty for all compilers but
gcc. That's problematic because it prevents using it in other compilers;
which is necessary e.g. for atomics portability. It's also just
generally dubious to do so in a header as widely included as c.h.
Instead add pg_attribute_format_arg, pg_attribute_printf,
pg_attribute_noreturn macros which are implemented in the compilers that
understand them. Also add pg_attribute_noreturn and pg_attribute_packed,
but don't provide fallbacks, since they can affect functionality.
This means that external code that, possibly unwittingly, relied on
__attribute__ defined to be empty on !gcc compilers may now run into
warnings or errors on those compilers. But there shouldn't be many
occurances of that and it's hard to work around...
Discussion: 54B58BA3.8040302@ohmu.fi
Author: Oskari Saarenmaa, with some minor changes by me.
This requires changing quite a few places that were depending on
sizeof(HeapTupleHeaderData), but it seems for the best.
Michael Paquier, some adjustments by me
Replace some bogus "x[1]" declarations with "x[FLEXIBLE_ARRAY_MEMBER]".
Aside from being more self-documenting, this should help prevent bogus
warnings from static code analyzers and perhaps compiler misoptimizations.
This patch is just a down payment on eliminating the whole problem, but
it gets rid of a lot of easy-to-fix cases.
Note that the main problem with doing this is that one must no longer rely
on computing sizeof(the containing struct), since the result would be
compiler-dependent. Instead use offsetof(struct, lastfield). Autoconf
also warns against spelling that offsetof(struct, lastfield[0]).
Michael Paquier, review and additional fixes by me.
Relying on the normal shared latch simplifies interrupt/signal
handling because we can rely on all signal handlers setting the proc
latch. That in turn allows us to avoid the use of
ImmediateInterruptOK, which arguably isn't correct because
WaitLatchOrSocket isn't declared to be immediately interruptible.
Also change sections that wait on the walsender's latch to notice
interrupts quicker/more reliably and make them more consistent with
each other.
This is part of a larger "get rid of ImmediateInterruptOK" series.
Discussion: 20150115020335.GZ5245@awork2.anarazel.de
Each WAL record now carries information about the modified relation and
block(s) in a standardized format. That makes it easier to write tools that
need that information, like pg_rewind, prefetching the blocks to speed up
recovery, etc.
There's a whole new API for building WAL records, replacing the XLogRecData
chains used previously. The new API consists of XLogRegister* functions,
which are called for each buffer and chunk of data that is added to the
record. The new API also gives more control over when a full-page image is
written, by passing flags to the XLogRegisterBuffer function.
This also simplifies the XLogReadBufferForRedo() calls. The function can dig
the relation and block number from the WAL record, so they no longer need to
be passed as arguments.
For the convenience of redo routines, XLogReader now disects each WAL record
after reading it, copying the main data part and the per-block data into
MAXALIGNed buffers. The data chunks are not aligned within the WAL record,
but the redo routines can assume that the pointers returned by XLogRecGet*
functions are. Redo routines are now passed the XLogReaderState, which
contains the record in the already-disected format, instead of the plain
XLogRecord.
The new record format also makes the fixed size XLogRecord header smaller,
by removing the xl_len field. The length of the "main data" portion is now
stored at the end of the WAL record, and there's a separate header after
XLogRecord for it. The alignment padding at the end of XLogRecord is also
removed. This compansates for the fact that the new format would otherwise
be more bulky than the old format.
Reviewed by Andres Freund, Amit Kapila, Michael Paquier, Alvaro Herrera,
Fujii Masao.
xlog.c is huge, this makes it a little bit smaller, which is nice. Functions
related to putting together the WAL record are in xloginsert.c, and the
lower level stuff for managing WAL buffers and such are in xlog.c.
Also move the definition of XLogRecord to a separate header file. This
causes churn in the #includes of all the files that write WAL records, and
redo routines, but it avoids pulling in xlog.h into most places.
Reviewed by Michael Paquier, Alvaro Herrera, Andres Freund and Amit Kapila.
Previously replication commands like IDENTIFY_COMMAND were not logged
even when log_statements is set to all. Some users who want to audit
all types of statements were not satisfied with this situation. To
address the problem, this commit adds new GUC log_replication_commands.
If it's enabled, all replication commands are logged in the server log.
There are many ways to allow us to enable that logging. For example,
we can extend log_statement so that replication commands are logged
when it's set to all. But per discussion in the community, we reached
the consensus to add separate GUC for that.
Reviewed by Ian Barwick, Robert Haas and Heikki Linnakangas.
When decoding the results of a HEAP2_MULTI_INSERT (currently only
generated by COPY FROM) toast columns for all but the last tuple
weren't replaced by their actual contents before being handed to the
output plugin. The reassembled toast datums where disregarded after
every REORDER_BUFFER_CHANGE_(INSERT|UPDATE|DELETE) which is correct
for plain inserts, updates, deletes, but not multi inserts - there we
generate several REORDER_BUFFER_CHANGE_INSERTs for a single
xl_heap_multi_insert record.
To solve the problem add a clear_toast_afterwards boolean to
ReorderBufferChange's union member that's used by modifications. All
row changes but multi_inserts always set that to true, but
multi_insert sets it only for the last change generated.
Add a regression test covering decoding of multi_inserts - there was
none at all before.
Backpatch to 9.4 where logical decoding was introduced.
Bug found by Petr Jelinek.
Change the order of checks in similar functions to be the same; remove
a parameter that's not needed anymore; rename a memory context and
expand a couple of comments.
Per review comments from Amit Kapila
In order for this to work, walsenders need the optional ability to
connect to a database, so the "replication" keyword now allows true
or false, for backward-compatibility, and the new value "database"
(which causes the "dbname" parameter to be respected).
walsender needs to loop not only when idle but also when sending
decoded data to the user and when waiting for more xlog data to decode.
This means that there are now three separate loops inside walsender.c;
although some refactoring has been done here, this is still a bit ugly.
Andres Freund, with contributions from Álvaro Herrera, and further
review by me.
In b89e151054 I had assumed it was ok to use anonymous unions as
struct members, but while a longstanding extension in many compilers,
it's only been standardized in C11.
To fix, remove one of the anonymous unions which tried to hide some
implementation specific enum values and give the other a name. The
latter unfortunately requires changes in output plugins, but since the
feature has only been added a few days ago...
Andres Freund
This feature, building on previous commits, allows the write-ahead log
stream to be decoded into a series of logical changes; that is,
inserts, updates, and deletes and the transactions which contain them.
It is capable of handling decoding even across changes to the schema
of the effected tables. The output format is controlled by a
so-called "output plugin"; an example is included. To make use of
this in a real replication system, the output plugin will need to be
modified to produce output in the format appropriate to that system,
and to perform filtering.
Currently, information can be extracted from the logical decoding
system only via SQL; future commits will add the ability to stream
changes via walsender.
Andres Freund, with review and other contributions from many other
people, including Álvaro Herrera, Abhijit Menon-Sen, Peter Gheogegan,
Kevin Grittner, Robert Haas, Heikki Linnakangas, Fujii Masao, Abhijit
Menon-Sen, Michael Paquier, Simon Riggs, Craig Ringer, and Steve
Singer.
A new MAX_RATE option allows imposing a limit to the network transfer
rate from the server side. This is useful to limit the stress that
taking a base backup has on the server.
pg_basebackup is now able to specify a value to the server, too.
Author: Antonin Houska
Patch reviewed by Stefan Radomski, Andres Freund, Zoltán Böszörményi,
Fujii Masao, and Álvaro Herrera.
Replication slots are a crash-safe data structure which can be created
on either a master or a standby to prevent premature removal of
write-ahead log segments needed by a standby, as well as (with
hot_standby_feedback=on) pruning of tuples whose removal would cause
replication conflicts. Slots have some advantages over existing
techniques, as explained in the documentation.
In a few places, we refer to the type of replication slots introduced
by this patch as "physical" slots, because forthcoming patches for
logical decoding will also have slots, but with somewhat different
properties.
Andres Freund and Robert Haas
When a standby server follows the master using WAL archive, and it chooses
a new timeline (recovery_target_timeline='latest'), it only fetches the
timeline history file for the chosen target timeline, not any other history
files that might be missing from pg_xlog. For example, if the current
timeline is 2, and we choose 4 as the new recovery target timeline, the
history file for timeline 3 is not fetched, even if it's part of this
server's history. That's enough for the standby itself - the history file
for timeline 4 includes timeline 3 as well - but if a cascading standby
server wants to recover to timeline 3, it needs the history file. To fix,
when a new recovery target timeline is chosen, try to copy any missing
history files from the archive to pg_xlog between the old and new target
timeline.
A second similar issue was with the WAL files. When a standby recovers from
archive, and it reaches a segment that contains a switch to a new timeline,
recovery fetches only the WAL file labelled with the new timeline's ID. The
file from the new timeline contains a copy of the WAL from the old timeline
up to the point where the switch happened, and recovery recovers it from the
new file. But in streaming replication, walsender only tries to read it
from the old timeline's file. To fix, change walsender to read it from the
new file, so that it behaves the same as recovery in that sense, and doesn't
try to open the possibly nonexistent file with the old timeline's ID.
of timeline, take advantage of that in walreceiver.
Startup process is still in control of choosign the target timeline, by
scanning the timeline history files present in pg_xlog, but walreceiver now
uses the next timeline's ID to fetch its history file immediately after it
has finished streaming the old timeline. Before, the standby would first try
to restart streaming on the old timeline, which fetches the missing timeline
history file as a side-effect, and only then restart from the new timeline.
This patch eliminates the extra iteration, which speeds up the timeline
switch and reduces the noise in the log caused by the extra restart on the
old timeline.
Before this patch, streaming replication would refuse to start replicating
if the timeline in the primary doesn't exactly match the standby. The
situation where it doesn't match is when you have a master, and two
standbys, and you promote one of the standbys to become new master.
Promoting bumps up the timeline ID, and after that bump, the other standby
would refuse to continue.
There's significantly more timeline related logic in streaming replication
now. First of all, when a standby connects to primary, it will ask the
primary for any timeline history files that are missing from the standby.
The missing files are sent using a new replication command TIMELINE_HISTORY,
and stored in standby's pg_xlog directory. Using the timeline history files,
the standby can follow the latest timeline present in the primary
(recovery_target_timeline='latest'), just as it can follow new timelines
appearing in an archive directory.
START_REPLICATION now takes a TIMELINE parameter, to specify exactly which
timeline to stream WAL from. This allows the standby to request the primary
to send over WAL that precedes the promotion. The replication protocol is
changed slightly (in a backwards-compatible way although there's little hope
of streaming replication working across major versions anyway), to allow
replication to stop when the end of timeline reached, putting the walsender
back into accepting a replication command.
Many thanks to Amit Kapila for testing and reviewing various versions of
this patch.
We used to send structs wrapped in CopyData messages, which works as long as
the client and server agree on things like endianess, timestamp format and
alignment. That's good enough for running a standby server, which has to run
on the same platform anyway, but it's useful for tools like pg_receivexlog
to work across platforms.
This breaks protocol compatibility of streaming replication, but we never
promised that to be compatible across versions, anyway.
Rename replication_timeout to wal_sender_timeout, and add a new setting
called wal_receiver_timeout that does the same at the walreceiver side.
There was previously no timeout in walreceiver, so if the network went down,
for example, the walreceiver could take a long time to notice that the
connection was lost. Now with the two settings, both sides of a replication
connection will detect a broken connection similarly.
It is no longer necessary to manually set wal_receiver_status_interval to
a value smaller than the timeout. Both wal sender and receiver now
automatically send a "ping" message if more than 1/2 of the configured
timeout has elapsed, and it hasn't received any messages from the other end.
Amit Kapila, heavily edited by me.
The regular backend's main loop handles signal handling and error recovery
better than the current WAL sender command loop does. For example, if the
client hangs and a SIGTERM is received before starting streaming, the
walsender will now terminate immediately, rather than hang until the
connection times out.
mdinit() was misusing IsBootstrapProcessingMode() to decide whether to
create an fsync pending-operations table in the current process. This led
to creating a table not only in the startup and checkpointer processes as
intended, but also in the bgwriter process, not to mention other auxiliary
processes such as walwriter and walreceiver. Creation of the table in the
bgwriter is fatal, because it absorbs fsync requests that should have gone
to the checkpointer; instead they just sit in bgwriter local memory and are
never acted on. So writes performed by the bgwriter were not being fsync'd
which could result in data loss after an OS crash. I think there is no
live bug with respect to walwriter and walreceiver because those never
perform any writes of shared buffers; but the potential is there for
future breakage in those processes too.
To fix, make AuxiliaryProcessMain() export the current process's
AuxProcType as a global variable, and then make mdinit() test directly for
the types of aux process that should have a pendingOpsTable. Having done
that, we might as well also get rid of the random bool flags such as
am_walreceiver that some of the aux processes had grown. (Note that we
could not have fixed the bug by examining those variables in mdinit(),
because it's called from BaseInit() which is run by AuxiliaryProcessMain()
before entering any of the process-type-specific code.)
Back-patch to 9.2, where the problem was introduced by the split-up of
bgwriter and checkpointer processes. The bogus pendingOpsTable exists
in walwriter and walreceiver processes in earlier branches, but absent
any evidence that it causes actual problems there, I'll leave the older
branches alone.
Per testing by Andres Freund, this improves replication performance
and reduces replication latency and latency jitter. I was a bit
concerned about moving more work into XLogInsert, but testing seems
to show that it's not a problem in practice.
Along the way, improve comments for WaitLatchOrSocket.
Andres Freund. Review and stylistic cleanup by me.
There was a wild mix of calling conventions: Some were declared to
return void and didn't return, some returned an int exit code, some
claimed to return an exit code, which the callers checked, but
actually never returned, and so on.
Now all of these functions are declared to return void and decorated
with attribute noreturn and don't return. That's easiest, and most
code already worked that way.
Replication occurs only to memory on standby, not to disk,
so provides additional performance if user wishes to
reduce durability level slightly. Adds concept of multiple
independent sync rep queues.
Fujii Masao and Simon Riggs
As per my recent proposal, this refactors things so that these typedefs and
macros are available in a header that can be included in frontend-ish code.
I also changed various headers that were undesirably including
utils/timestamp.h to include datatype/timestamp.h instead. Unsurprisingly,
this showed that half the system was getting utils/timestamp.h by way of
xlog.h.
No actual code changes here, just header refactoring.
walsender.h should depend on xlog.h, not vice versa. (Actually, the
inclusion was circular until a couple hours ago, which was even sillier;
but Bruce broke it in the expedient rather than logically correct
direction.) Because of that poor decision, plus blind application of
pgrminclude, we had a situation where half the system was depending on
xlog.h to include such unrelated stuff as array.h and guc.h. Clean up
the header inclusion, and manually revert a lot of what pgrminclude had
done so things build again.
This episode reinforces my feeling that pgrminclude should not be run
without adult supervision. Inclusion changes in header files in particular
need to be reviewed with great care. More generally, it'd be good if we
had a clearer notion of module layering to dictate which headers can sanely
include which others ... but that's a big task for another day.
The latch infrastructure is now capable of detecting all cases where the
walsender loop needs to wake up, so there is no reason to have an arbitrary
timeout.
Also, modify the walsender loop logic to follow the standard pattern of
ResetLatch, test for work to do, WaitLatch. The previous coding was both
hard to follow and buggy: it would sometimes busy-loop despite having
nothing available to do, eg between receipt of a signal and the next time
it was caught up with new WAL, and it also had interesting choices like
deciding to update to WALSNDSTATE_STREAMING on the strength of information
known to be obsolete.
In pursuit of this (and with the expectation that WaitLatch will be needed
in more places), convert the latch field that was already added to PGPROC
for sync rep into a generic latch that is activated for all PGPROC-owning
processes, and change many of the standard backend signal handlers to set
that latch when a signal happens. This will allow WaitLatch callers to be
wakened properly by these signals.
In passing, fix a whole bunch of signal handlers that had been hacked to do
things that might change errno, without adding the necessary save/restore
logic for errno. Also make some minor fixes in unix_latch.c, and clean
up bizarre and unsafe scheme for disowning the process's latch. Much of
this has to be back-patched into 9.1.
Peter Geoghegan, with additional work by Tom
Somebody thought it'd be cute to invent a set of Node tag numbers that were
defined independently of, and indeed conflicting with, the main tag-number
list. While this accidentally failed to fail so far, it would certainly
lead to trouble as soon as anyone wanted to, say, apply copyObject to these
node types. Clang was already complaining about the use of makeNode on
these tags, and I think quite rightly so. Fix by pushing these node
definitions into the mainstream, including putting replnodes.h where it
belongs.
Standby servers can now have WALSender processes, which can work with
either WALReceiver or archive_commands to pass data. Fully updated
docs, including new conceptual terms of sending server, upstream and
downstream servers. WALSenders terminated when promote to master.
Fujii Masao, review, rework and doc rewrite by Simon Riggs
