The majority practice is to add -DFRONTEND in directories building files
that are, at other times, built for the backend. Some directories
lacking that property added a noise -DFRONTEND in one build system.
Remove the excess flags, for consistency.
Before, make check-world would create a new temporary installation for
each test suite, which is slow and wasteful. Instead, we now create one
test installation that is used by all test suites that are part of a
make run.
The management of the temporary installation is removed from pg_regress
and handled in the makefiles. This allows for better control, and
unifies the code with that of test suites not run through pg_regress.
review and msvc support by Michael Paquier <michael.paquier@gmail.com>
more review by Fabien Coelho <coelho@cri.ensmp.fr>
There were a couple of hard-coded sleeps in the tests: to wait for standby
to catch up with master, and to wait for promotion with "pg_ctl promote"
to complete. Instead of a fixed, hard-coded sleep, poll the server with a
query once a second. This isn't ideal either, and I wish we had a better
solution for real-world applications too, but this should fix the
immediate problem.
Patch by Michael Paquier, with some editing by me.
Update comments and function names to use the terms "source" and "target"
consistently. Some places were calling them remote and local instead, which
was confusing.
Fix incorrect comment in extractPageInfo on database creation record - it
was wrong on what happens for databases created in the target that don't
exist in source.
Now that the test servers are initialized twice in each .pl script,
the single END block is not enough to stop them. Add a new clean_rewind_test
function that is called at the end of each test.
Michael Paquier
Previously, these functions were created in a schema "binary_upgrade",
which was deleted after pg_upgrade was finished. Because we don't want
to keep that schema around permanently, move them to pg_catalog but
rename them with a binary_upgrade_... prefix.
The provided functions are only small wrappers around global variables
that were added specifically for pg_upgrade use, so keeping the module
separate does not create any modularity.
The functions still check that they are only called in binary upgrade
mode, so it is not possible to call these during normal operation.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Now that we use CRC-32C in WAL and the control file, the "traditional" and
"legacy" CRC-32 variants are not used in any frontend programs anymore.
Move the code for those back from src/common to src/backend/utils/hash.
Also move the slicing-by-8 implementation (back) to src/port. This is in
preparation for next patch that will add another implementation that uses
Intel SSE 4.2 instructions to calculate CRC-32C, where available.
Should call just "pg_rewind", instead of "./pg_rewind". The tests are called
so that PATH contains the temporariy installation bin dir.
Per report from Alvaro Herrera
* Don't pass arguments to prove, since that's not supported on perl 5.8
which is the minimum version supported by the TAP tests. Refactor the
test files themselves to run the tests twice, in both local and remote mode.
* Use eq rather than == for string comparison. This thinko caused the remote
versions of the tests to never run.
* Add "use strict" and "use warnings", and fix warnings that that produced.
* Increase the delay after standby promotion, to make the tests more robust.
* In remote mode, the connection string to the promoted standby was
incorrect, leading to connection errors.
Patch by Michael Paquier, to address Peter Eisentraut's report.
gettext was unhappy about the commit b216ad7 because it revealed
the problem that internationalized messages may contain '\r' escape
sequence in pg_rewind. This commit moves '\r' to a separate printf() call.
Michael Paquier, bug reported by Peter Eisentraut
While gcc doesn't complain if you declare a function "static" and then
define it not-static, other compilers do; and in any case the code is
highly misleading this way. Add the missing "static" keywords to a
couple of recent patches. Per buildfarm member pademelon.
Don't allow pg_rewind to run as root on Unix platforms, as any new or
replaced files in the data directory would become owned by root. On Windows,
it can run under a user that has Administrator rights, but a restricted
token needs to be used. This is the same we do e.g. in pg_resetxlog.
Also, add missing set_pglocale_pgservice() call, to fix localization.
Michael Paquier and Fujii Masao
Some of the TAP tests were supposing that PG programs would accept switches
after non-switch arguments on their command lines. While GNU getopt_long()
does allow that, our own implementation does not, and it's nowhere
suggested in our documentation that such cases should work. Adjust the
tests to use only the documented syntax.
Back-patch to 9.4, since without this the TAP tests fail when run with
src/port's getopt_long() implementation.
Michael Paquier
This is useful to control autovacuum log volume, for situations where
monitoring only a set of tables is necessary.
Author: Michael Paquier
Reviewed by: A team led by Naoya Anzai (also including Akira Kurosawa,
Taiki Kondo, Huong Dangminh), Fujii Masao.
Similarly to previous fix 9b8d478, commit 2c03216 has switched
XLogReaderAllocate() to use a set of palloc calls instead of malloc,
causing any callers of this function to fail with an error instead of
receiving a NULL pointer in case of out-of-memory error. Fix this by
using palloc_extended with MCXT_ALLOC_NO_OOM that will safely return
NULL in case of an OOM.
Michael Paquier, slightly modified by me.
This is the second try at this, after fcef161729 failed miserably and
had to be reverted: as it turns out, libpq cannot depend on libpgcommon
after all. Instead of shuffling code in the master branch, make that one
just like 9.4 and accept the duplication. (This was all my own mistake,
not the patch submitter's).
psql was already accepting conninfo strings as the first parameter in
\connect, but the way it worked wasn't sane; some of the other
parameters would get the previous connection's values, causing it to
connect to a completely unexpected server or, more likely, not finding
any server at all because of completely wrong combinations of
parameters.
Fix by explicitely checking for a conninfo-looking parameter in the
dbname position; if one is found, use its complete specification rather
than mix with the other arguments. Also, change tab-completion to not
try to complete conninfo/URI-looking "dbnames" and document that
conninfos are accepted as first argument.
There was a weak consensus to backpatch this, because while the behavior
of using the dbname as a conninfo is nowhere documented for \connect, it
is reasonable to expect that it works because it does work in many other
contexts. Therefore this is backpatched all the way back to 9.0.
Author: David Fetter, Andrew Dunstan. Some editorialization by me
(probably earning a Gierth's "Sloppy" badge in the process.)
Reviewers: Andrew Gierth, Erik Rijkers, Pavel Stěhule, Stephen Frost,
Robert Haas, Andrew Dunstan.
psql was already accepting conninfo strings as the first parameter in
\connect, but the way it worked wasn't sane; some of the other
parameters would get the previous connection's values, causing it to
connect to a completely unexpected server or, more likely, not finding
any server at all because of completely wrong combinations of
parameters.
Fix by explicitely checking for a conninfo-looking parameter in the
dbname position; if one is found, use its complete specification rather
than mix with the other arguments. Also, change tab-completion to not
try to complete conninfo/URI-looking "dbnames" and document that
conninfos are accepted as first argument.
There was a weak consensus to backpatch this, because while the behavior
of using the dbname as a conninfo is nowhere documented for \connect, it
is reasonable to expect that it works because it does work in many other
contexts. Therefore this is backpatched all the way back to 9.0.
To implement this, routines previously private to libpq have been
duplicated so that psql can decide what looks like a conninfo/URI
string. In back branches, just duplicate the same code all the way back
to 9.2, where URIs where introduced; 9.0 and 9.1 have a simpler version.
In master, the routines are moved to src/common and renamed.
Author: David Fetter, Andrew Dunstan. Some editorialization by me
(probably earning a Gierth's "Sloppy" badge in the process.)
Reviewers: Andrew Gierth, Erik Rijkers, Pavel Stěhule, Stephen Frost,
Robert Haas, Andrew Dunstan.
As with initdb these programs need to run with a restricted token, and
if they don't pg_upgrade will fail when run as a user with Adminstrator
privileges.
Backpatch to all live branches. On the development branch the code is
reorganized so that the restricted token code is now in a single
location. On the stable bramches a less invasive change is made by
simply copying the relevant code to pg_upgrade.c and pg_resetxlog.c.
Patches and bug report from Muhammad Asif Naeem, reviewed by Michael
Paquier, slightly edited by me.
Bugs all spotted by Coverity, including wrong realloc() size request
and memory leaks. Cosmetic improvements by me.
The usage of the global variable "filemap" here is still pretty awful,
but at least I got rid of the gratuitous aliasing in several routines
(which was helping to annoy Coverity, as well as being a bug risk).
If set, the pager will not be used unless this many lines are to be
displayed, even if that is more than the screen depth. Default is zero,
meaning it's disabled.
There is probably more work to be done in giving the user control over
when the pager is used, particularly when wide output forces use of the
pager regardless of how many lines there are, but this is a start.
This improves on commit bbfd7edae5 by
making two simple changes:
* pg_attribute_noreturn now takes parentheses, ie pg_attribute_noreturn().
Likewise pg_attribute_unused(), pg_attribute_packed(). This reduces
pgindent's tendency to misformat declarations involving them.
* attributes are now always attached to function declarations, not
definitions. Previously some places were taking creative shortcuts,
which were not merely candidates for bad misformatting by pgindent
but often were outright wrong anyway. (It does little good to put a
noreturn annotation where callers can't see it.) In any case, if
we would like to believe that these macros can be used with non-gcc
compilers, we should avoid gratuitous variance in usage patterns.
I also went through and manually improved the formatting of a lot of
declarations, and got rid of excessively repetitive (and now obsolete
anyway) comments informing the reader what pg_attribute_printf is for.
Earlier versions of this tool were available (and still are) on github.
Thanks to Michael Paquier, Alvaro Herrera, Peter Eisentraut, Amit Kapila,
and Satoshi Nagayasu for review.
Foreign tables can now be inheritance children, or parents. Much of the
system was already ready for this, but we had to fix a few things of
course, mostly in the area of planner and executor handling of row locks.
As side effects of this, allow foreign tables to have NOT VALID CHECK
constraints (and hence to accept ALTER ... VALIDATE CONSTRAINT), and to
accept ALTER SET STORAGE and ALTER SET WITH/WITHOUT OIDS. Continuing to
disallow these things would've required bizarre and inconsistent special
cases in inheritance behavior. Since foreign tables don't enforce CHECK
constraints anyway, a NOT VALID one is a complete no-op, but that doesn't
mean we shouldn't allow it. And it's possible that some FDWs might have
use for SET STORAGE or SET WITH OIDS, though doubtless they will be no-ops
for most.
An additional change in support of this is that when a ModifyTable node
has multiple target tables, they will all now be explicitly identified
in EXPLAIN output, for example:
Update on pt1 (cost=0.00..321.05 rows=3541 width=46)
Update on pt1
Foreign Update on ft1
Foreign Update on ft2
Update on child3
-> Seq Scan on pt1 (cost=0.00..0.00 rows=1 width=46)
-> Foreign Scan on ft1 (cost=100.00..148.03 rows=1170 width=46)
-> Foreign Scan on ft2 (cost=100.00..148.03 rows=1170 width=46)
-> Seq Scan on child3 (cost=0.00..25.00 rows=1200 width=46)
This was done mainly to provide an unambiguous place to attach "Remote SQL"
fields, but it is useful for inherited updates even when no foreign tables
are involved.
Shigeru Hanada and Etsuro Fujita, reviewed by Ashutosh Bapat and Kyotaro
Horiguchi, some additional hacking by me
