Pages from the bitmap created by the TIDBitmap API can be exact or
lossy. The TIDBitmap API extracts the tuple offsets from exact pages
into an array for the convenience of the caller.
This was done in tbm_private|shared_iterate() right after advancing the
iterator. However, as long as tbm_private|shared_iterate() set a
reference to the PagetableEntry in the TBMIterateResult, the offset
extraction can be done later.
Waiting to extract the tuple offsets has a few benefits. For the shared
iterator case, it allows us to extract the offsets after dropping the
shared iterator state lock, reducing time spent holding a contended
lock.
Separating the iteration step and extracting the offsets later also
allows us to avoid extracting the offsets for prefetched blocks. Those
offsets were never used, so the overhead of extracting and storing them
was wasted.
The real motivation for this change, however, is that future commits
will make bitmap heap scan use the read stream API. This requires a
TBMIterateResult per issued block. By removing the array of tuple
offsets from the TBMIterateResult and only extracting the offsets when
they are used, we reduce the memory required for per buffer data
substantially.
Suggested-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKGLHbKP3jwJ6_%2BhnGi37Pw3BD5j2amjV3oSk7j-KyCnY7Q%40mail.gmail.com
This comment mentions that we check that the configured number of
backends does not exceed MAX_BACKENDS in RegisterBackgroundWorker()
and relevant GUC check hooks, neither of which has those checks
anymore. To fix, adjust this comment to say that we do the check
in InitializeMaxBackends().
Oversights in commits 6bc8ef0b7f and 0b1fe1413e.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/Z7zOEzz8lNjaU9yf%40nathan
MAX_BACKENDS influences many things besides postmaster. I e.g. noticed that we
don't have static assertions ensuring BUF_REFCOUNT_MASK is big enough for
MAX_BACKENDS, adding them would require including postmaster.h in
buf_internals.h which doesn't seem right.
While at that, add MAX_BACKENDS_BITS, as that's useful in various places for
static assertions (to be added in subsequent commits).
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/wptizm4qt6yikgm2pt52xzyv6ycmqiutloyvypvmagn7xvqkce@d4xuv3mylpg4
Due to misunderstanding on my part, commit 235328ee4 did not go far
enough to silence older versions of Valgrind. For those, it was the bit
scan that was problematic, not the subsequent bit-masking operation. To
fix, use the unaligned path for the trailing bytes. Since we don't have
a bit scan here anymore, also remove some comments and endian-specific
coding around that.
Reported-by: Anton A. Melnikov <a.melnikov@postgrespro.ru>
Discussion: https://postgr.es/m/f3aa2d45-3b28-41c5-9499-a1bc30e0f8ec@postgrespro.ru
Backpatch-through: 17
The four following attributes are removed from pg_stat_wal:
* wal_write
* wal_sync
* wal_write_time
* wal_sync_time
a051e71e28 has added an equivalent of this information in pg_stat_io
with more granularity as this now spreads across the backend types, IO
context and IO objects. So, keeping the same information in pg_stat_wal
has little benefits.
Another benefit of this commit is the removal of PendingWalStats,
simplifying an upcoming patch to add per-backend WAL statistics, which
already support IO statistics and which have access to the write/sync
stats data of WAL.
The GUC track_wal_io_timing, that was used to enable or disable the
aggregation of the write and sync timings for WAL, is also removed.
pgstat_prepare_io_time() is simplified.
Bump catalog version.
Bump PGSTAT_FILE_FORMAT_ID, due to the update of PgStat_WalStats.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/Z7RkQ0EfYaqqjgz/@ip-10-97-1-34.eu-west-3.compute.internal
To implement AIO writes, the backend initiating writes needs to transfer the
lock ownership to the AIO subsystem, so the lock held during the write can be
released in another backend.
Other backends need to be able to "complete" an asynchronously started IO to
avoid deadlocks (consider e.g. one backend starting IO for a buffer and then
waiting for a heavyweight lock held by another relation followed by the
current holder of the heavyweight lock waiting for the IO to complete).
To that end, this commit adds LWLockDisown() and LWLockReleaseDisowned(). If
code uses LWLockDisown() it's the code's responsibility to ensure that the
lock is released in case of errors.
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/1f6b50a7-38ef-4d87-8246-786d39f46ab9@iki.fi
The signedness of the 'char' type in C is
implementation-dependent. For instance, 'signed char' is used by
default on x86 CPUs, while 'unsigned char' is used on aarch
CPUs. Previously, we accidentally let C implementation signedness
affect persistent data. This led to inconsistent results when
comparing char data across different platforms.
This commit introduces a new 'default_char_signedness' field in
ControlFileData to store the signedness of the 'char' type. While this
change does not encourage the use of 'char' without explicitly
specifying its signedness, this field can be used as a hint to ensure
consistent behavior for pre-v18 data files that store data sorted by
the 'char' type on disk (e.g., GIN and GiST indexes), especially in
cross-platform replication scenarios.
Newly created database clusters unconditionally set the default char
signedness to true. pg_upgrade (with an upcoming commit) changes this
flag for clusters if the source database cluster has
signedness=false. As a result, signedness=false setting will become
rare over time. If we had known about the problem during the last
development cycle that forced initdb (v8.3), we would have made all
clusters signed or all clusters unsigned. Making pg_upgrade the only
source of signedness=false will cause the population of database
clusters to converge toward that retrospective ideal.
Bump catalog version (for the catalog changes) and PG_CONTROL_VERSION
(for the additions in ControlFileData).
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/CB11ADBC-0C3F-4FE0-A678-666EE80CBB07%40amazon.com
The type argument wasn't actually really necessary. It was a remnant
of converting the API of the gist strategy translation from using
opclass to using opfamily+opcintype (commits c09e5a6a01,
622f678c10). For looking up the gist translation function, we used
the convention "amproclefttype = amprocrighttype = opclass's
opcintype" (see pg_amproc.h). But each operator family should only
have one translation function, and getting the right type for the
lookup is sometimes cumbersome and fragile, so this is all
unnecessarily complicated.
To simplify this, change the gist stategy support procedure to take
"any", "any" as argument. (This is arbitrary but seems intuitive.
The alternative of using InvalidOid as argument(s) upsets various DDL
commands, so it's not practical.) Then we don't need opcintype for
the lookup, and we can remove it from all the API layers introduced by
commit c09e5a6a01.
This also adds some more documentation about the correct signature of
the gist support function and adds more checks in gistvalidate().
This was previously underspecified. (It relied implicitly on
convention mentioned above.)
Discussion: https://www.postgresql.org/message-id/flat/E72EAA49-354D-4C2E-8EB9-255197F55330@enterprisedb.com
This commit implements OAUTHBEARER, RFC 7628, and OAuth 2.0 Device
Authorization Grants, RFC 8628. In order to use this there is a
new pg_hba auth method called oauth. When speaking to a OAuth-
enabled server, it looks a bit like this:
$ psql 'host=example.org oauth_issuer=... oauth_client_id=...'
Visit https://oauth.example.org/login and enter the code: FPQ2-M4BG
Device authorization is currently the only supported flow so the
OAuth issuer must support that in order for users to authenticate.
Third-party clients may however extend this and provide their own
flows. The built-in device authorization flow is currently not
supported on Windows.
In order for validation to happen server side a new framework for
plugging in OAuth validation modules is added. As validation is
implementation specific, with no default specified in the standard,
PostgreSQL does not ship with one built-in. Each pg_hba entry can
specify a specific validator or be left blank for the validator
installed as default.
This adds a requirement on libcurl for the client side support,
which is optional to build, but the server side has no additional
build requirements. In order to run the tests, Python is required
as this adds a https server written in Python. Tests are gated
behind PG_TEST_EXTRA as they open ports.
This patch has been a multi-year project with many contributors
involved with reviews and in-depth discussions: Michael Paquier,
Heikki Linnakangas, Zhihong Yu, Mahendrakar Srinivasarao, Andrey
Chudnovsky and Stephen Frost to name a few. While Jacob Champion
is the main author there have been some levels of hacking by others.
Daniel Gustafsson contributed the validation module and various bits
and pieces; Thomas Munro wrote the client side support for kqueue.
Author: Jacob Champion <jacob.champion@enterprisedb.com>
Co-authored-by: Daniel Gustafsson <daniel@yesql.se>
Co-authored-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Antonin Houska <ah@cybertec.at>
Reviewed-by: Kashif Zeeshan <kashi.zeeshan@gmail.com>
Discussion: https://postgr.es/m/d1b467a78e0e36ed85a09adf979d04cf124a9d4b.camel@vmware.com
Before executing a cached generic plan, AcquireExecutorLocks() in
plancache.c locks all relations in a plan's range table to ensure the
plan is safe for execution. However, this locks runtime-prunable
relations that will later be pruned during "initial" runtime pruning,
introducing unnecessary overhead.
This commit defers locking for such relations to executor startup and
ensures that if the CachedPlan is invalidated due to concurrent DDL
during this window, replanning is triggered. Deferring these locks
avoids unnecessary locking overhead for pruned partitions, resulting
in significant speedup, particularly when many partitions are pruned
during initial runtime pruning.
* Changes to locking when executing generic plans:
AcquireExecutorLocks() now locks only unprunable relations, that is,
those found in PlannedStmt.unprunableRelids (introduced in commit
cbc127917e), to avoid locking runtime-prunable partitions
unnecessarily. The remaining locks are taken by
ExecDoInitialPruning(), which acquires them only for partitions that
survive pruning.
This deferral does not affect the locks required for permission
checking in InitPlan(), which takes place before initial pruning.
ExecCheckPermissions() now includes an Assert to verify that all
relations undergoing permission checks, none of which can be in the
set of runtime-prunable relations, are properly locked.
* Plan invalidation handling:
Deferring locks introduces a window where prunable relations may be
altered by concurrent DDL, invalidating the plan. A new function,
ExecutorStartCachedPlan(), wraps ExecutorStart() to detect and handle
invalidation caused by deferred locking. If invalidation occurs,
ExecutorStartCachedPlan() updates CachedPlan using the new
UpdateCachedPlan() function and retries execution with the updated
plan. To ensure all code paths that may be affected by this handle
invalidation properly, all callers of ExecutorStart that may execute a
PlannedStmt from a CachedPlan have been updated to use
ExecutorStartCachedPlan() instead.
UpdateCachedPlan() replaces stale plans in CachedPlan.stmt_list. A new
CachedPlan.stmt_context, created as a child of CachedPlan.context,
allows freeing old PlannedStmts while preserving the CachedPlan
structure and its statement list. This ensures that loops over
statements in upstream callers of ExecutorStartCachedPlan() remain
intact.
ExecutorStart() and ExecutorStart_hook implementations now return a
boolean value indicating whether plan initialization succeeded with a
valid PlanState tree in QueryDesc.planstate, or false otherwise, in
which case QueryDesc.planstate is NULL. Hook implementations are
required to call standard_ExecutorStart() at the beginning, and if it
returns false, they should do the same without proceeding.
* Testing:
To verify these changes, the delay_execution module tests scenarios
where cached plans become invalid due to changes in prunable relations
after deferred locks.
* Note to extension authors:
ExecutorStart_hook implementations must verify plan validity after
calling standard_ExecutorStart(), as explained earlier. For example:
if (prev_ExecutorStart)
plan_valid = prev_ExecutorStart(queryDesc, eflags);
else
plan_valid = standard_ExecutorStart(queryDesc, eflags);
if (!plan_valid)
return false;
<extension-code>
return true;
Extensions accessing child relations, especially prunable partitions,
via ExecGetRangeTableRelation() must now ensure their RT indexes are
present in es_unpruned_relids (introduced in commit cbc127917e), or
they will encounter an error. This is a strict requirement after this
change, as only relations in that set are locked.
The idea of deferring some locks to executor startup, allowing locks
for prunable partitions to be skipped, was first proposed by Tom Lane.
Reviewed-by: Robert Haas <robertmhaas@gmail.com> (earlier versions)
Reviewed-by: David Rowley <dgrowleyml@gmail.com> (earlier versions)
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us> (earlier versions)
Reviewed-by: Tomas Vondra <tomas@vondra.me>
Reviewed-by: Junwang Zhao <zhjwpku@gmail.com>
Discussion: https://postgr.es/m/CA+HiwqFGkMSge6TgC9KQzde0ohpAycLQuV7ooitEEpbKB0O_mg@mail.gmail.com
Replace the use of Constraint with a new ATAlterConstraint struct, which
allows us to pass additional information. No functionality is added by
this commit. This is necessary for future work that allows altering
constraints in other ways.
I (Álvaro) took the liberty of restructuring the code for ALTER
CONSTRAINT beyond what Amul did. The original coding before Amul's
patch was unnecessarily baroque, and this change makes things simpler
by removing one level of subroutine. Also, partly remove the assumption
that only partitioned tables are relevant (by passing sensible 'recurse'
arguments) and no longer ignore whether ONLY was specified. I say
'partly' because the current coding only walks down via the 'conparentid'
relationship, which is only used for partitioned tables; but future
patches could handle ONLY or not for other types of constraint changes
for legacy inheritance trees too.
Author: Amul Sul <sulamul@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/CAAJ_b94bfgPV-8Mw_HwSBeheVwaK9=5s+7+KbBj_NpwXQFgDGg@mail.gmail.com
This commit follows the idea of the 4767bc8ff2. If sub-query has only one
GROUP BY column, we can consider its output variable as being unique. We can
employ this fact in the statistics to make more precise estimations in the
upper query block.
Author: Andrei Lepikhov <lepihov@gmail.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>
This commit introduces idle_replication_slot_timeout GUC that allows
inactive slots to be invalidated at the time of checkpoint. Because
checkpoints happen checkpoint_timeout intervals, there can be some lag
between when the idle_replication_slot_timeout was exceeded and when the
slot invalidation is triggered at the next checkpoint. To avoid such lags,
users can force a checkpoint to promptly invalidate inactive slots.
Note that the idle timeout invalidation mechanism is not applicable for
slots that do not reserve WAL or for slots on the standby server that are
synced from the primary server (i.e., standby slots having 'synced' field
'true'). Synced slots are always considered to be inactive because they
don't perform logical decoding to produce changes.
The slots can become inactive for a long period if a subscriber is down
due to a system error or inaccessible because of network issues. If such a
situation persists, it might be more practical to recreate the subscriber
rather than attempt to recover the node and wait for it to catch up which
could be time-consuming.
Then, external tools could create replication slots (e.g., for migrations
or upgrades) that may fail to remove them if an error occurs, leaving
behind unused slots that take up space and resources. Manually cleaning
them up can be tedious and error-prone, and without intervention, these
lingering slots can cause unnecessary WAL retention and system bloat.
As the duration of idle_replication_slot_timeout is in minutes, any test
using that would be time-consuming. We are planning to commit a follow up
patch for tests by using the injection point framework.
Author: Nisha Moond <nisha.moond412@gmail.com>
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Vignesh C <vignesh21@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Hou Zhijie <houzj.fnst@fujitsu.com>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/CALj2ACW4aUe-_uFQOjdWCEN-xXoLGhmvRFnL8SNw_TZ5nJe+aw@mail.gmail.com
Discussion: https://postgr.es/m/OS0PR01MB5716C131A7D80DAE8CB9E88794FC2@OS0PR01MB5716.jpnprd01.prod.outlook.com
It's been some time since we did this, partly because the upstream
snowball project hasn't formally tagged a new release since 2021.
The main motivation for doing it now is to absorb a bug fix
(their commit e322673a841d9abd69994ae8cd20e191090b6ef4), which
prevents a null pointer dereference crash if SN_create_env() gets
a malloc failure at just the wrong point. We'll patch the back
branches with only that change, but we might as well do the full
sync dance on HEAD.
Aside from a bunch of mostly-minor tweaks to existing stemmers, this
update adds a new stemmer for Estonian. It also removes the existing
stemmer for Romanian using ISO-8859-2 encoding. Upstream apparently
concluded that ISO-8859-2 doesn't provide an adequate representation
of some Romanian characters, and the UTF-8 implementation should be
used instead.
While at it, update the README's instructions for doing a sync,
which have not been adjusted during the addition of meson tooling.
Thanks to Maksim Korotkov for discovering the null-pointer
bug and submitting the fix to upstream snowball.
Reported-by: Maksim Korotkov <m.korotkov@postgrespro.ru>
Discussion: https://postgr.es/m/1d1a46-67ab1000-21-80c451@83151435
The Self-Join Elimination (SJE) feature removes an inner join of a plain
table to itself in the query tree if it is proven that the join can be
replaced with a scan without impacting the query result. Self-join and
inner relation get replaced with the outer in query, equivalence classes,
and planner info structures. Also, the inner restrictlist moves to the
outer one with the removal of duplicated clauses. Thus, this optimization
reduces the length of the range table list (this especially makes sense for
partitioned relations), reduces the number of restriction clauses and,
in turn, selectivity estimations, and potentially improves total planner
prediction for the query.
This feature is dedicated to avoiding redundancy, which can appear after
pull-up transformations or the creation of an EquivalenceClass-derived clause
like the below.
SELECT * FROM t1 WHERE x IN (SELECT t3.x FROM t1 t3);
SELECT * FROM t1 WHERE EXISTS (SELECT t3.x FROM t1 t3 WHERE t3.x = t1.x);
SELECT * FROM t1,t2, t1 t3 WHERE t1.x = t2.x AND t2.x = t3.x;
In the future, we could also reduce redundancy caused by subquery pull-up
after unnecessary outer join removal in cases like the one below.
SELECT * FROM t1 WHERE x IN
(SELECT t3.x FROM t1 t3 LEFT JOIN t2 ON t2.x = t1.x);
Also, it can drastically help to join partitioned tables, removing entries
even before their expansion.
The SJE proof is based on innerrel_is_unique() machinery.
We can remove a self-join when for each outer row:
1. At most, one inner row matches the join clause;
2. Each matched inner row must be (physically) the same as the outer one;
3. Inner and outer rows have the same row mark.
In this patch, we use the next approach to identify a self-join:
1. Collect all merge-joinable join quals which look like a.x = b.x;
2. Add to the list above the baseretrictinfo of the inner table;
3. Check innerrel_is_unique() for the qual list. If it returns false, skip
this pair of joining tables;
4. Check uniqueness, proved by the baserestrictinfo clauses. To prove the
possibility of self-join elimination, the inner and outer clauses must
match exactly.
The relation replacement procedure is not trivial and is partly combined
with the one used to remove useless left joins. Tests covering this feature
were added to join.sql. Some of the existing regression tests changed due
to self-join removal logic.
Discussion: https://postgr.es/m/flat/64486b0b-0404-e39e-322d-0801154901f3%40postgrespro.ru
Author: Andrey Lepikhov <a.lepikhov@postgrespro.ru>
Author: Alexander Kuzmenkov <a.kuzmenkov@postgrespro.ru>
Co-authored-by: Alexander Korotkov <aekorotkov@gmail.com>
Co-authored-by: Alena Rybakina <lena.ribackina@yandex.ru>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Simon Riggs <simon@2ndquadrant.com>
Reviewed-by: Jonathan S. Katz <jkatz@postgresql.org>
Reviewed-by: David Rowley <david.rowley@2ndquadrant.com>
Reviewed-by: Thomas Munro <thomas.munro@enterprisedb.com>
Reviewed-by: Konstantin Knizhnik <k.knizhnik@postgrespro.ru>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Hywel Carver <hywel@skillerwhale.com>
Reviewed-by: Laurenz Albe <laurenz.albe@cybertec.at>
Reviewed-by: Ronan Dunklau <ronan.dunklau@aiven.io>
Reviewed-by: vignesh C <vignesh21@gmail.com>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Reviewed-by: Greg Stark <stark@mit.edu>
Reviewed-by: Jaime Casanova <jcasanov@systemguards.com.ec>
Reviewed-by: Michał Kłeczek <michal@kleczek.org>
Reviewed-by: Alena Rybakina <lena.ribackina@yandex.ru>
Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>
ExecInitModifyTable() forgot to trim MERGE-related lists to exclude
entries for result relations pruned during initial pruning, so fix
that.
While at it, make the function's use of the pruned resultRelations
list, rather than ModifyTable.resultRelations, more consistent.
Reported-by: Alexander Lakhin <exclusion@gmail.com> (via sqlsmith)
Reviewed-by: Junwang Zhao <zhjwpku@gmail.com>
Discussion: https://postgr.es/m/e72c94d9-e5f9-4753-9bc1-69d72bd54b8a@gmail.com
wal_buffers_full has been introduced in pg_stat_wal in 8d9a935965, as
some information providing metrics for the tuning of the GUC
wal_buffers. WalUsage has been introduced before that in df3b181499.
Moving this field is proving to be beneficial for several reasons:
- This information can now be made available in more layers, providing
more granularity than just pg_stat_wal, on a per-query basis: EXPLAIN,
pgss and VACUUM/ANALYZE logs.
- A patch is under discussion to provide statistics for WAL at backend
level, and this move simplifies a bit the handling of pending
statistics. The remaining data in PgStat_PendingWalStats now relates to
write/sync counters and times, with equivalents present in pg_stat_io,
that backend statistics are able to already track. So this should cut
all the dependencies between PgStat_PendingWalStats and WAL stats at
backend level.
As of this change, wal_buffers_full only shows in pg_stat_wal.
Author: Bertrand Drouvot
Reviewed-by: Ilia Evdokimov
Discussion: https://postgr.es/m/Z6SOha5YFFgvpwQY@ip-10-97-1-34.eu-west-3.compute.internal
Allow multiple backends to initialize WAL buffers concurrently. This way
`MemSet((char *) NewPage, 0, XLOG_BLCKSZ);` can run in parallel without
taking a single LWLock in exclusive mode.
The new algorithm works as follows:
* reserve a page for initialization using XLogCtl->InitializeReserved,
* ensure the page is written out,
* once the page is initialized, try to advance XLogCtl->InitializedUpTo and
signal to waiters using XLogCtl->InitializedUpToCondVar condition
variable,
* repeat previous steps until we reserve initialization up to the target
WAL position,
* wait until concurrent initialization finishes using a
XLogCtl->InitializedUpToCondVar.
Now, multiple backends can, in parallel, concurrently reserve pages,
initialize them, and advance XLogCtl->InitializedUpTo to point to the latest
initialized page.
Author: Yura Sokolov <y.sokolov@postgrespro.ru>
Co-authored-by: Alexander Korotkov <aekorotkov@gmail.com>
Reviewed-by: Pavel Borisov <pashkin.elfe@gmail.com>
Many GUCs accept special values like -1 or an empty string to
disable the feature, use a system default, etc. While the
documentation consistently lists these special values, the GUC
descriptions do not. Many such descriptions fail to mention the
special values, and those that do vary in phrasing and placement.
This commit aims to bring some consistency to this area by applying
the following rules:
* Special values should be listed at the end of the long
description.
* Descriptions should use numerals (e.g., "0") instead of words
(e.g., "zero").
* Special value mentions should be concise and direct (e.g., "0
disables the timeout.", "An empty string means use the operating
system setting.").
* Multiple special values should be listed in ascending order.
Of course, there are exceptions, such as
max_pred_locks_per_relation and search_path, whose special values
are too complex to include. And there are cases like
listen_addresses, where the meaning of an empty string is arguably
too obvious to include. In those cases, I've refrained from adding
special value information to the GUC description.
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: "David G. Johnston" <david.g.johnston@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/Z6aIy4aywxUZHAo6%40nathan
RBTXN_PREPARE flag and rbtxn_prepared macro could be misinterpreted as
either indicating the transaction type (e.g. a prepared transaction or
a normal transaction) or its currentstate (e.g. skipped or its prepare
message is sent), especially after commit 072ee847ad introduced the
RBTXN_SENT_PREPARE flag and the rbtxn_sent_prepare macro.
The RBTXN_PREPARE flag (and its corresponding macro) have been renamed
to RBTXN_IS_PREPARE to explicitly indicate the transaction
type. Therefore, this commit also adds the RBTXN_IS_PREPARE flag to
the transaction that is a prepared transaction and has been skipped,
which previously had only the RBTXN_SKIPPED_PREPARE flag.
Reviewed-by: Amit Kapila, Peter Smith
Discussion: https://postgr.es/m/CAA4eK1KgNmBsG%3D155E7QQ6TX9RoWnM4z5Z20SvsbwxSe_QXYsg%40mail.gmail.com
Previously, transaction aborts were detected concurrently only during
system catalog scans while replaying a transaction in streaming mode.
This commit adds an additional CLOG lookup to check the transaction
status, allowing the logical decoding to skip changes also when it
doesn't touch system catalogs, if the transaction is already
aborted. This optimization enhances logical decoding performance,
especially for large transactions that have already been rolled back,
as it avoids unnecessary disk or network I/O.
To avoid potential slowdowns caused by frequent CLOG lookups for small
transactions (most of which commit), the CLOG lookup is performed only
for large transactions before eviction. The performance benchmark
results showed there is not noticeable performance regression due to
CLOG lookups.
Reviewed-by: Amit Kapila, Peter Smith, Vignesh C, Ajin Cherian
Reviewed-by: Dilip Kumar, Andres Freund
Discussion: https://postgr.es/m/CAD21AoDht9Pz_DFv_R2LqBTBbO4eGrpa9Vojmt5z5sEx3XwD7A@mail.gmail.com
Remove some (char *) casts related to uses of the pg_checksum_page()
function. These casts are useless, because everything involved
already has the right type. Moreover, these casts actually silently
discarded a const qualifier. The declaration of a higher-level
function needs to be adjusted to fix that.
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Discussion: https://www.postgresql.org/message-id/flat/fd1fcedb-3492-4fc8-9e3e-74b97f2db6c7%40eisentraut.org
This commit adds the amount of time spent sleeping due to
cost-based delay to the pg_stat_progress_vacuum and
pg_stat_progress_analyze system views. A new configuration
parameter named track_cost_delay_timing, which is off by default,
controls whether this information is gathered. For vacuum, the
reported value includes the sleep time of any associated parallel
workers. However, parallel workers only report their sleep time
once per second to avoid overloading the leader process.
Bumps catversion.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Co-authored-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Sami Imseih <samimseih@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Masahiro Ikeda <ikedamsh@oss.nttdata.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Sergei Kornilov <sk@zsrv.org>
Discussion: https://postgr.es/m/ZmaXmWDL829fzAVX%40ip-10-97-1-34.eu-west-3.compute.internal
This function is used in both vacuum and analyze code paths, and a
follow-up commit will require distinguishing between the two. This
commit forces callers to specify whether they are in a vacuum or
analyze path, but it does not use that information for anything
yet.
Author: Nathan Bossart <nathandbossart@gmail.com>
Co-authored-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/ZmaXmWDL829fzAVX%40ip-10-97-1-34.eu-west-3.compute.internal
Aggressive vacuums must scan every unfrozen tuple in order to advance
the relfrozenxid/relminmxid. Because data is often vacuumed before it is
old enough to require freezing, relations may build up a large backlog
of pages that are set all-visible but not all-frozen in the visibility
map. When an aggressive vacuum is triggered, all of these pages must be
scanned. These pages have often been evicted from shared buffers and
even from the kernel buffer cache. Thus, aggressive vacuums often incur
large amounts of extra I/O at the expense of foreground workloads.
To amortize the cost of aggressive vacuums, eagerly scan some
all-visible but not all-frozen pages during normal vacuums.
All-visible pages that are eagerly scanned and set all-frozen in the
visibility map are counted as successful eager freezes and those not
frozen are counted as failed eager freezes.
If too many eager scans fail in a row, eager scanning is temporarily
suspended until a later portion of the relation. The number of failures
tolerated is configurable globally and per table.
To effectively amortize aggressive vacuums, we cap the number of
successes as well. Capping eager freeze successes also limits the amount
of potentially wasted work if these pages are modified again before the
next aggressive vacuum. Once we reach the maximum number of blocks
successfully eager frozen, eager scanning is disabled for the remainder
of the vacuum of the relation.
Original design idea from Robert Haas, with enhancements from
Andres Freund, Tomas Vondra, and me
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Robert Treat <rob@xzilla.net>
Reviewed-by: Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/flat/CAAKRu_ZF_KCzZuOrPrOqjGVe8iRVWEAJSpzMgRQs%3D5-v84cXUg%40mail.gmail.com
"I/O" seems more descriptive than "Asynchronous Behavior", given that some of
the GUCs in the section don't relate to anything asynchronous.
Most other abbreviations in the config sections are un-abbreviated, but
"Input/Output" seems less likely to be helpful than just IO or I/O.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/x3tlw2jk5gm3r3mv47hwrshffyw7halpczkfbk3peksxds7bvc@lguk43z3bsyq
Commit 1dc5ebc90 allowed PL/pgSQL to perform in-place updates
of expanded-object variables that are being updated with
assignments like "x := f(x, ...)". However this was allowed
only for a hard-wired list of functions f(), since we need to
be sure that f() will not modify the variable if it fails.
It was always envisioned that we should make that extensible,
but at the time we didn't have a good way to do so. Since
then we've invented the idea of "support functions" to allow
attaching specialized optimization knowledge to functions,
and that is a perfect mechanism for doing this.
Hence, adjust PL/pgSQL to use a support function request instead
of hard-wired logic to decide if in-place update is safe.
Preserve the previous optimizations by creating support functions
for the three functions that were previously hard-wired.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andrey Borodin <x4mmm@yandex-team.ru>
Reviewed-by: Pavel Borisov <pashkin.elfe@gmail.com>
Discussion: https://postgr.es/m/CACxu=vJaKFNsYxooSnW1wEgsAO5u_v1XYBacfVJ14wgJV_PYeg@mail.gmail.com
If a read/write expanded variable is declared locally to the
assignment statement that is updating it, and it is referenced
exactly once in the assignment RHS, then we can optimize the
operation as a direct update of the expanded value, whether
or not the function(s) operating on it can be trusted not to
modify the value before throwing an error. This works because
if an error does get thrown, we no longer care what value the
variable has.
In cases where that doesn't work, fall back to the previous
rule that checks for safety of the top-level function.
In any case, postpone determination of whether these optimizations
are feasible until we are executing a Param referencing the target
variable and that variable holds a R/W expanded object. While the
previous incarnation of exec_check_rw_parameter was pretty cheap,
this is a bit less so, and our plan to invoke support functions
will make it even less so. So avoiding the check for variables
where it couldn't be useful should be a win.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andrey Borodin <x4mmm@yandex-team.ru>
Reviewed-by: Pavel Borisov <pashkin.elfe@gmail.com>
Discussion: https://postgr.es/m/CACxu=vJaKFNsYxooSnW1wEgsAO5u_v1XYBacfVJ14wgJV_PYeg@mail.gmail.com
This commit adds fmtIdEnc() and fmtQualifiedIdEnc(), which allow to specify
the encoding as an explicit argument. Additionally setFmtEncoding() is
provided, which defines the encoding when no explicit encoding is provided, to
avoid breaking all code using fmtId().
All users of fmtId()/fmtQualifiedId() are either converted to the explicit
version or a call to setFmtEncoding() has been added.
This commit does not yet utilize the now well-defined encoding, that will
happen in a subsequent commit.
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Backpatch-through: 13
Security: CVE-2025-1094
There are cases where we cannot / do not want to error out for invalidly
encoded input. In such cases it can be useful to replace e.g. an incomplete
multi-byte characters with bytes that will trigger an error when getting
validated as part of a larger string.
Unfortunately, until now, for some encoding no such sequence existed. For
those encodings this commit removes one previously accepted input combination
- we consider that to be ok, as the chosen bytes are outside of the valid
ranges for the encodings, we just previously failed to detect that.
As we cannot add a new field to pg_wchar_table without breaking ABI, this is
implemented "in-line" in the newly added function.
Author: Noah Misch <noah@leadboat.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Backpatch-through: 13
Security: CVE-2025-1094
This is similar to d575051b9a but this time for the comments in
plannodes.h to avoid long lines, which is useful if adding per-field
annotations with pg_node_attr() to these planner structures.
Some patches are under discussion to add such properties to planner
fields, which is something that may or may not happen, and this change
makes future proposals easier to work on and review, which being more
consistent in style with the parse nodes.
Author: Sami Imseih
Discussion: https://postgr.es/m/Z5xTb5iBHVGns35R@paquier.xyz
This adds a new variant of generated columns that are computed on read
(like a view, unlike the existing stored generated columns, which are
computed on write, like a materialized view).
The syntax for the column definition is
... GENERATED ALWAYS AS (...) VIRTUAL
and VIRTUAL is also optional. VIRTUAL is the default rather than
STORED to match various other SQL products. (The SQL standard makes
no specification about this, but it also doesn't know about VIRTUAL or
STORED.) (Also, virtual views are the default, rather than
materialized views.)
Virtual generated columns are stored in tuples as null values. (A
very early version of this patch had the ambition to not store them at
all. But so much stuff breaks or gets confused if you have tuples
where a column in the middle is completely missing. This is a
compromise, and it still saves space over being forced to use stored
generated columns. If we ever find a way to improve this, a bit of
pg_upgrade cleverness could allow for upgrades to a newer scheme.)
The capabilities and restrictions of virtual generated columns are
mostly the same as for stored generated columns. In some cases, this
patch keeps virtual generated columns more restricted than they might
technically need to be, to keep the two kinds consistent. Some of
that could maybe be relaxed later after separate careful
considerations.
Some functionality that is currently not supported, but could possibly
be added as incremental features, some easier than others:
- index on or using a virtual column
- hence also no unique constraints on virtual columns
- extended statistics on virtual columns
- foreign-key constraints on virtual columns
- not-null constraints on virtual columns (check constraints are supported)
- ALTER TABLE / DROP EXPRESSION
- virtual column cannot have domain type
- virtual columns are not supported in logical replication
The tests in generated_virtual.sql have been copied over from
generated_stored.sql with the keyword replaced. This way we can make
sure the behavior is mostly aligned, and the differences can be
visible. Some tests for currently not supported features are
currently commented out.
Reviewed-by: Jian He <jian.universality@gmail.com>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Tested-by: Shlok Kyal <shlok.kyal.oss@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/a368248e-69e4-40be-9c07-6c3b5880b0a6@eisentraut.org
This commit introduces changes to track unpruned relations explicitly,
making it possible for top-level plan nodes, such as ModifyTable and
LockRows, to avoid processing partitions pruned during initial
pruning. Scan-level nodes, such as Append and MergeAppend, already
avoid the unnecessary processing by accessing partition pruning
results directly via part_prune_index. In contrast, top-level nodes
cannot access pruning results directly and need to determine which
partitions remain unpruned.
To address this, this commit introduces a new bitmapset field,
es_unpruned_relids, which the executor uses to track the set of
unpruned relations. This field is referenced during plan
initialization to skip initializing certain nodes for pruned
partitions. It is initialized with PlannedStmt.unprunableRelids,
a new field that the planner populates with RT indexes of relations
that cannot be pruned during runtime pruning. These include relations
not subject to partition pruning and those required for execution
regardless of pruning.
PlannedStmt.unprunableRelids is computed during set_plan_refs() by
removing the RT indexes of runtime-prunable relations, identified
from PartitionPruneInfos, from the full set of relation RT indexes.
ExecDoInitialPruning() then updates es_unpruned_relids by adding
partitions that survive initial pruning.
To support this, PartitionedRelPruneInfo and PartitionedRelPruningData
now include a leafpart_rti_map[] array that maps partition indexes to
their corresponding RT indexes. The former is used in set_plan_refs()
when constructing unprunableRelids, while the latter is used in
ExecDoInitialPruning() to convert partition indexes returned by
get_matching_partitions() into RT indexes, which are then added to
es_unpruned_relids.
These changes make it possible for ModifyTable and LockRows nodes to
process only relations that remain unpruned after initial pruning.
ExecInitModifyTable() trims lists, such as resultRelations,
withCheckOptionLists, returningLists, and updateColnosLists, to
consider only unpruned partitions. It also creates ResultRelInfo
structs only for these partitions. Similarly, child RowMarks for
pruned relations are skipped.
By avoiding unnecessary initialization of structures for pruned
partitions, these changes improve the performance of updates and
deletes on partitioned tables during initial runtime pruning.
Due to ExecInitModifyTable() changes as described above, EXPLAIN on a
plan for UPDATE and DELETE that uses runtime initial pruning no longer
lists partitions pruned during initial pruning.
Reviewed-by: Robert Haas <robertmhaas@gmail.com> (earlier versions)
Reviewed-by: Tomas Vondra <tomas@vondra.me>
Discussion: https://postgr.es/m/CA+HiwqFGkMSge6TgC9KQzde0ohpAycLQuV7ooitEEpbKB0O_mg@mail.gmail.com
One way autovacuum chooses tables to vacuum is by comparing the
number of updated or deleted tuples with a value calculated using
autovacuum_vacuum_threshold and autovacuum_vacuum_scale_factor.
The threshold specifies the base value for comparison, and the
scale factor specifies the fraction of the table size to add to it.
This strategy ensures that smaller tables are vacuumed after fewer
updates/deletes than larger tables, which is reasonable in many
cases but can result in infrequent vacuums on very large tables.
This is undesirable for a couple of reasons, such as very large
tables incurring a huge amount of bloat between vacuums.
This new parameter provides a way to set a limit on the value
calculated with autovacuum_vacuum_threshold and
autovacuum_vacuum_scale_factor so that very large tables are
vacuumed more frequently. By default, it is set to 100,000,000
tuples, but it can be disabled by setting it to -1. It can also be
adjusted for individual tables by changing storage parameters.
Author: Nathan Bossart <nathandbossart@gmail.com>
Co-authored-by: Frédéric Yhuel <frederic.yhuel@dalibo.com>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Laurenz Albe <laurenz.albe@cybertec.at>
Reviewed-by: Michael Banck <mbanck@gmx.net>
Reviewed-by: Joe Conway <mail@joeconway.com>
Reviewed-by: Sami Imseih <samimseih@gmail.com>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: wenhui qiu <qiuwenhuifx@gmail.com>
Reviewed-by: Vinícius Abrahão <vinnix.bsd@gmail.com>
Reviewed-by: Robert Treat <rob@xzilla.net>
Reviewed-by: Alena Rybakina <a.rybakina@postgrespro.ru>
Discussion: https://postgr.es/m/956435f8-3b2f-47a6-8756-8c54ded61802%40dalibo.com
If exactly one relation type is requested in a command of the \dtisv
family, say "tables", "indexes", etc instead of "relations". This
should cover the majority of actual uses, without creating a huge
number of new translatable strings. The error messages for no
matching relations are adjusted as well.
In passing, invent "pg_log_error_internal()" to be used for frontend
error messages that don't seem to need translation, analogously to
errmsg_internal() in the backend. The implementation is a bit cheesy,
being just a macro to prevent xgettext from recognizing a trigger
keyword. This won't avoid a useless gettext lookup cycle at runtime
--- but surely we don't care about an extra microsecond or two in
what's supposed to be a can't-happen case. I (tgl) also made
"pg_fatal_internal()", though it's not used in this patch.
Author: Greg Sabino Mullane <htamfids@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAKAnmm+7o93fQV-RFkGaN1QnP-0D4d3JTykD+cLueqjDMKdfag@mail.gmail.com
It is possible for the inactive_since value of an invalid replication slot
to be updated multiple times, which is unexpected behavior like during the
release of the slot or at the time of restart. This is harmless because
invalid slots are not allowed to be accessed but it is not prudent to
update invalid slots. We are planning to invalidate slots due to other
reasons like idle time and it will look odd that the slot's inactive_since
displays the recent time in this field after invalidated due to idle time.
So, this patch ensures that the inactive_since field of slots is not
updated for invalid slots.
In the passing, ensure to use the same inactive_since time for all the
slots at restart while restoring them from the disk.
Author: Nisha Moond <nisha.moond412@gmail.com>
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Vignesh C <vignesh21@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Hou Zhijie <houzj.fnst@fujitsu.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/CABdArM7QdifQ_MHmMA=Cc4v8+MeckkwKncm2Nn6tX9wSCQ-+iw@mail.gmail.com
This commit adds WAL IO stats to both pg_stat_io view and per-backend IO
statistics (pg_stat_get_backend_io()). This change is possible since
f92c854cf4, as WAL IO is not counted in blocks in some code paths
where its stats data is measured (like WAL read in xlogreader.c).
IOContext gains IOCONTEXT_INIT and IOObject IOOBJECT_WAL, with the
following combinations allowed:
- IOOBJECT_WAL/IOCONTEXT_NORMAL is used to track I/O operations done on
already-created WAL segments.
- IOOBJECT_WAL/IOCONTEXT_INIT is used for tracking I/O operations done
when initializing WAL segments.
The core changes are done in pg_stat_io.c, backend statistics inherit
them. Backend statistics and pg_stat_io are now available for the WAL
writer, the WAL receiver and the WAL summarizer processes.
I/O timing data is controlled by the GUC track_io_timing, like the
existing data of pg_stat_io for consistency. The timings related to
IOOBJECT_WAL show up if the GUC is enabled (disabled by default).
Bump pgstats file version, due to the additions in IOObject and
IOContext, impacting the amount of data written for the fixed-numbered
IO stats kind in the pgstats file.
Author: Nazir Bilal Yavuz
Reviewed-by: Bertrand Drouvot, Nitin Jadhav, Amit Kapila, Michael
Paquier, Melanie Plageman, Bharath Rupireddy
Discussion: https://postgr.es/m/CAN55FZ3AiQ+ZMxUuXnBpd0Rrh1YhwJ5FudkHg=JU0P+-W8T4Vg@mail.gmail.com
This turns GistTranslateCompareType() into a callback function of the
gist index AM instead of a standalone function. The existing callers
are changed to use IndexAmTranslateCompareType(). This then makes
that code not hardcoded toward gist.
This means in particular that the temporal keys code is now
independent of gist. Also, this generalizes commit 74edabce7a, so
other index access methods other than the previously hardcoded ones
could now work as REPLICA IDENTITY in a logical replication
subscriber.
Author: Mark Dilger <mark.dilger@enterprisedb.com>
Co-authored-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://www.postgresql.org/message-id/flat/E72EAA49-354D-4C2E-8EB9-255197F55330@enterprisedb.com
